Redox-dependent control of i-Motif DNA structure using copper cations

Efficient Silver(I)-Containing I-Motif DNA Hybrid Catalyst for Enantioselective Diels-Alder Reactions

The inherent chiral structures of DNA serve as attractive scaffolds to construct DNA hybrid catalysts for valuable enantioselective transformations. Duplex and G-quadruplex DNA-based enantioselective catalysis has made great progress, yet novel design strategies of DNA hybrid catalysts are highly demanding and atomistic analysis of active centers is still challenging. DNA i-motif structures could be finely tuned by different cytosine-cytosine base pairs, providing a new platform to design DNA catalysts. Herein, we found that a human telomeric i-motif DNA containing cytosine-silver(I)-cytosine (C-Ag+-C) base pairs interacting with Cu(II) ions (i-motif DNA(Ag+)/Cu2+) could catalyze Diels-Alder reactions with full conversions and up to 95 % enantiomeric excess. As characterized by various physicochemical techniques, the presence of Ag+ is proved to replace the protons in hemiprotonated cytosine-cytosine (C : C+) base pairs and stabilize the DNA i-motif to allow the acceptance of Cu(II) ions. The i-motif DNA(Ag+)/Cu2+ catalyst shows about 8-fold rate acceleration compared with DNA and Cu2+. Based on DNA mutation experiments, thermodynamic studies and density function theory calculations, the catalytic center of Cu(II) ion is proposed to be located in a specific loop region via binding to one nitrogen-7 atom of an unpaired adenine and two phosphate-oxygen atoms from nearby deoxythymidine monophosphate and deoxyadenosine monophosphate, respectively.

The roles of DNA methylation on pH dependent i-motif (iM) formation in rice

I-motifs (iMs) are four-stranded non-B DNA structures containing C-rich DNA sequences. The formation of iMs is sensitive to pH conditions and DNA methylation, although the extent of which is still unknown in both humans and plants. To investigate this, we here conducted iMab antibody-based immunoprecipitation and sequencing (iM-IP-seq) along with bisulfite sequencing using CK (original genomic DNA without methylation-related treatments) and hypermethylated or demethylated DNA at both pH 5.5 and 7.0 in rice, establishing a link between pH, DNA methylation and iM formation on a genome-wide scale. We found that iMs folded at pH 7.0 displayed higher methylation levels than those formed at pH 5.5. DNA demethylation and hypermethylation differently influenced iM formation at pH 7.0 and 5.5. Importantly, CG hypo-DMRs (differentially methylated regions) and CHH (H = A, C and T) hyper-DMRs alone or coordinated with CG/CHG hyper-DMRs may play determinant roles in the regulation of pH dependent iM formation. Thus, our study shows that the nature of DNA sequences alone or combined with their methylation status plays critical roles in determining pH-dependent formation of iMs. It therefore deepens the understanding of the pH and methylation dependent modulation of iM formation, which has important biological implications and practical applications.

Utility of intercalator displacement assays for screening of ligands for i-motif DNA structures

Cytosine rich sequences can form intercalated, i-motif DNA structures stabilized by hemi-protonated cytosine:cytosine base pairing. These sequences are often located in regulatory regions of genes such as promoters. Ligands targeting i-motif structures may provide potential leads for treatments for genetic disease. The focus on ligands interacting with i-motif DNA has been increasing in recent years. Here, we describe the fluorescent intercalator displacement (FID) assay using thiazole orange binding i-motif DNA and assess the binding affinity of a ligand to the i-motif DNA by displacing thiazole orange. This provides a time and cost-effective high throughput screening of ligands against secondary DNA structures for hit identification.

A beginner's handbook to identify and characterize i-motif DNA

Genomic DNA exhibits an innate ability to manifest diverse sequence-dependent secondary structures, serving crucial functions in gene regulation and cellular equilibrium. While extensive research has confirmed the formation of G-quadruplex structures by guanine-rich sequences in vitro and in cells, recent investigations have turned the quadruplex community's attention to the cytosine (C)-rich complementary strands that can adopt unique tetra-stranded conformation, termed as intercalated motif or i-motif. I-motifs are stabilized by hemi-protonated C:CH+ base pairs under acidic conditions. Initially, the in vivo occurrence of i-motifs was underestimated because their formation is favored at non-physiological pH. However, groundbreaking research utilizing the structure-specific iMab antibody and high-throughput sequencing have recently detected their conserved dispersion throughout the genome, challenging previous assumptions. Given the evolving nature of this research field, it becomes imperative to conduct independent in vitro experiments aimed at identifying potential i-motif formation in C-rich sequences and consolidating the findings to address the properties of i-motifs. This chapter serves as an introductory guide for the swift identification of novel i-motifs, where we present an experimental framework for investigating and characterizing i-motif sequences in vitro. In this chapter, we selected a synthetic oligonucleotide (C7T3) sequence and outlined appropriate methodologies for annealing the i-motif structure into suitable buffers. Then, we validated its formation by CD (Circular Dichroism) and NMR (Nuclear Magnetic Resonance) spectroscopy. Finally, we provided a thorough account of the step-by-step procedures to investigate the effect of i-motif formation on the stalling or retardation of DNA replication using high resolution primer extension assays.

Intramolecular Folding of PolyT Oligonucleotides Induced by Cooperative Binding of Silver(I) Ions

Ag⁺-bridged T-Ag⁺-T was recently discovered in a Ag⁺-DNA nanowire crystal, but it was reported that Ag⁺ had little to no affinity to T nucleobases and T-rich oligonucleotides in solution. Therefore, the binding mode for the formation of this type of novel metallo base pair in solution is elusive. Herein, we demonstrate that Ag⁺ can interact with polyT oligonucleotides once the concentration of Ag⁺ in solution exceeds a threshold value. The threshold value is independent of the concentration of the polyT oligonucleotide but is inversely proportional to the length of the polyT oligonucleotide. The polyT oligonucleotides are intramolecularly folded due to their positively cooperative formation and the stack of T-Ag⁺-T base pairs, resulting in the 5'- and 3'-ends being in close proximity to each other. The intramolecular Ag⁺-folded polyT oligonucleotide has a higher thermal stability than the duplex and can be reversibly modulated by cysteine.

Determination of 5-formyluracil via oxime-based nucleotide-metal coordination

In this article, a small chemical molecule was synthesized, and its ability to regulate activities of DNA polymerase was tested. In addition, we also used isothermal amplification technology to detect the content of 5-formyluracil sites in irradiated genomic DNA, which confirmed its capability for the detection of 5-formyluracil content in general samples. This study presents the first example of the determination of 5fU based on coordination chemistry.

CpG Methylation Altered the Stability and Structure of the i-Motifs Located in the CpG Islands

Cytosine methylation within the 5′-C-phosphate-G-3′ sequence of nucleotides (called CpG methylation) is a well-known epigenetic modification of genomic DNA that plays an important role in gene expression and development. CpG methylation is likely to be altered in the CpG islands. CpG islands are rich in cytosine, forming a structure called the i-motif via cytosine-cytosine hydrogen bonding. However, little is known about the effect of CpG methylation on the i-motif. In this study, The CpG methylation-induced structural changes on the i-motif was examined by thermal stability, circular dichroism (CD) spectroscopy, and native-polyacrylamide gel electrophoresis (Native-PAGE) evaluation of five i-motif-forming DNAs from four cancer-related genes (VEGF, C-KIT, BCL2, and HRAS). This research shows that CpG methylation increased the transitional pH of several i-motif-forming DNAs and their thermal stability. When examining the effect of CpG methylation on the i-motif in the presence of opposite G4-forming DNAs, CpG methylation influenced the proportion of G4 and i-motif formation. This study showed that CpG methylation altered the stability and structure of the i-motif in CpG islands.

Stability and context of intercalated motifs (i-motifs) for biological applications

DNA is naturally dynamic and can self-assemble into alternative secondary structures including the intercalated motif (i-motif), a four-stranded structure formed in cytosine-rich DNA sequences. Until recently, i-motifs were thought to be unstable in physiological cellular environments. Studies demonstrating their existence in the human genome and role in gene regulation are now shining light on their biological relevance. Herein, we review the effects of epigenetic modifications on i-motif structure and stability, and biological factors that affect i-motif formation within cells. Furthermore, we highlight recent progress in targeting i-motifs with structure-specific ligands for biotechnology and therapeutic purposes.

Functionalizing Framework Nucleic-Acid-Based Nanostructures for Biomedical Application

Strategies for functionalizing diverse tetrahedral framework nucleic acids (tFNAs) have been extensively explored since the first successful fabrication of tFNA by Turberfield. One-pot annealing of at least four DNA single strands is the most common method to prepare tFNA, as it optimizes the cost, yield, and speed of assembly. Herein, the focus is on four key merits of tFNAs and their potential for biomedical applications. The natural ability of tFNA to scavenge reactive oxygen species, along with remarkable enhancement in cellular endocytosis and tissue permeability based on its appropriate size and geometry, promotes cell-material interactions to direct or probe cell behavior, especially to treat inflammatory and degenerative diseases. Moreover, the structural programmability of tFNA enables the development of static tFNA-based nanomaterials via engineering of functional oligonucleotides or therapeutic molecules, and dynamic tFNAs via attachment of stimuli-responsive DNA apparatuses, leading to potential applications in targeted therapies, tissue regeneration, antitumor strategies, and antibacterial treatment. Although there are impressive performance and significant progress, the challenges and prospects of functionalizing tFNA-based nanostructures are still indicated in this review.

A pH and Mg2+-Responsive Molecular Switch Based on a Stable DNA Minidumbbell Bearing 5' and 3'-Overhangs

Minidumbbell (MDB) is a non-B DNA structure of which the thermodynamic stability is sensitive to a chemical environment such as pH, serving as a potential structural motif in constructing DNA-based molecular switches. This work aims to design thermodynamically stable MDB structures bearing 5' and 3'-overhanging deoxyribonucleotides in order to examine the possibility of MDB to be functionalized. Via making use of 5-methylcytosine and adjusting the pH of solution to be acidic, MDBs bearing 1-nucleotide (nt) or 2-nt overhanging residues at the 5' and 3'-ends have been obtained. Based on one of the new MDB sequences, we have designed a molecular switch that could respond to dual inputs of pH and Mg²⁺. The MDB strand and its partner strand formed a duplex (the "ON" state) upon inputting pH 7 and Mg²⁺, whereas the duplex dissociated to restore the MDB structure (the "OFF" state) upon inputting pH 5 and EDTA. The demonstration on the ability of MDB to sustain 5' and 3'-overhanging residues and the construction of a pH and Mg²⁺-responsive molecular switch will extend the application of MDB structures in dynamic DNA nanotechnology.

AC-motif: a DNA motif containing adenine and cytosine repeat plays a role in gene regulation

I-motif or C4 is a four-stranded DNA structure with a protonated cytosine:cytosine base pair (C+:C) found in cytosine-rich sequences. We have found that oligodeoxynucleotides containing adenine and cytosine repeats form a stable secondary structure at a physiological pH with magnesium ion, which is similar to i-motif structure, and have named this structure ‘adenine:cytosine-motif (AC-motif)’. AC-motif contains C⁺:C base pairs intercalated with putative A⁺:C base pairs between protonated adenine and cytosine. By investigation of the AC-motif present in the CDKL3 promoter (AC-motif_CDKL3), one of AC-motifs found in the genome, we confirmed that AC-motif_CDKL3 has a key role in regulating CDKL3 gene expression in response to magnesium. This is further supported by confirming that genome-edited mutant cell lines, lacking the AC-motif formation, lost this regulation effect. Our results verify that adenine-cytosine repeats commonly present in the genome can form a stable non-canonical secondary structure with a non-Watson–Crick base pair and have regulatory roles in cells, which expand non-canonical DNA repertoires.

Mechanical unfolding of ensemble biomolecular structures by shear force

Mechanical unfolding of biomolecular structures has been exclusively performed at the single-molecule level by single-molecule force spectroscopy (SMFS) techniques. Here we transformed sophisticated mechanical investigations on individual molecules into a simple platform suitable for molecular ensembles. By using shear flow inside a homogenizer tip, DNA secondary structures such as i-motifs are unfolded by shear force up to 50 pN at a 77 796 s^-1 shear rate. We found that the larger the molecules, the higher the exerted shear forces. This shear force approach revealed affinity between ligands and i-motif structures. It also demonstrated a mechano-click reaction in which a Cu(i) catalyzed azide-alkyne cycloaddition was modulated by shear force. We anticipate that this ensemble force spectroscopy method can investigate intra- and inter-molecular interactions with the throughput, accuracy, and robustness unparalleled to those of SMFS methods.

Drivers of i-DNA Formation in a Variety of Environments Revealed by Four-Dimensional UV Melting and Annealing

i-DNA is a four-stranded, pH-sensitive structure formed by cytosine-rich DNA sequences. Previous reports have addressed the conditions for formation of this motif in DNA in vitro and validated its existence in human cells. Unfortunately, these in vitro studies have often been performed under different experimental conditions, making comparisons difficult. To overcome this, we developed a four-dimensional UV melting and annealing (4DUVMA) approach to analyze i-DNA formation under a variety of conditions (e.g., pH, temperature, salt, crowding). Analysis of 25 sequences provided a global understanding of i-DNA formation under disparate conditions, which should ultimately allow the design of accurate prediction tools. For example, we found reliable linear correlations between the midpoint of pH transition and temperature (-0.04 ± 0.003 pH unit per 1.0 °C temperature increment) and between the melting temperature and pH (-23.8 ± 1.1 °C per pH unit increment). In addition, by analyzing the hysteresis between denaturing and renaturing profiles in both pH and thermal transitions, we found that loop length, nature of the C-tracts, pH, temperature, and crowding agents all play roles in i-DNA folding kinetics. Interestingly, our data indicate which conformer is more favorable for the sequences with an odd number of cytosine base pairs. Then the thermal and pH stabilities of "native" i-DNAs from human promoter genes were measured under near physiological conditions (pH 7.0, 37 °C). The 4DUVMA method can become a universal resource to analyze the properties of any i-DNA-prone sequence.

Evolution of Diverse Strategies for Promoter Regulation

DNA is fundamentally important for all cellular organisms due to its role as a store of hereditary genetic information. The precise and accurate regulation of gene transcription depends primarily on promoters, which vary significantly within and between genomes. Some promoters are rich in specific types of bases, while others have more varied, complex sequence characteristics. However, it is not only base sequence but also epigenetic modifications and altered DNA structure that regulate promoter activity. Significantly, many promoters across all organisms contain sequences that can form intrastrand hairpins (cruciforms) or four-stranded structures (G-quadruplex or i-motif). In this review we integrate recent studies on promoter regulation that highlight the importance of DNA structure in the evolutionary adaptation of promoter sequences.

Opposite Effects of Potassium Ions on the Thermal Stability of i-Motif DNA in Different Buffer Systems

i-motifs are noncanonical DNA structures formed via the stack of intercalating hemi-protonated C⁺: C base pairs in C-rich DNA strands and play essential roles in the regulation of gene expression. Here, we systematically investigated the impacts of K⁺ on i-motif DNA folding using different buffer systems. We found that i-motif structures display very different T _m values at the same pH and ion strength in different buffer systems. More importantly, K⁺ disrupts the i-motif formed in the MES and Bis-Tris buffer; however, K⁺ stabilizes the i-motif in phosphate, citrate, and sodium cacodylate buffers. Next, we selected phosphate buffer and confirmed by single-molecule fluorescence resonance energy transfer that K⁺ indeed has the stabilizing effect on the folding of i-motif DNA from pH 5.8 to 8.0. Nonetheless, circular dichroism spectra further indicate that the structures formed by i-motif sequences at high K⁺ concentrations at neutral and alkaline pH are not i-motif but other types of higher-order structures and most likely C-hairpins. We finally proposed the mechanisms of how K⁺ plays the opposite roles in different buffer systems. The present study may provide new insights into our understanding of the formation and stability of i-motif DNA.

Ferrocene-Containing DNA Monolayers: Influence of Electrostatics on the Electron Transfer Dynamics

A 153-mer target DNA was amplified using ethynyl ferrocene dATP and a tailed forward primer resulting in a duplex with a single-stranded DNA tail for hybridization to a surface-tethered probe. A thiolated probe containing the sequence complementary to the tail as well as a 15 polythimine vertical spacer with a (CH₂)₆ spacer was immobilized on the surface of a gold electrode and hybridized to the ferrocene-modified complementary strand. Potential step chronoamperometry and cyclic voltammetry were used to probe the potential of zero charge, PZC, and the rate of heterogeneous electron transfer between the electrode and the immobilized ferrocene moieties. Chronoamperometry gives three, well-resolved exponential current-time decays corresponding to ferrocene centers located within 13 Å (4 bases) along the duplex. Significantly, the apparent standard heterogeneous electron transfer rate constant, k_app^o, observed depends on the initial potential, i.e., the rate of electron transfer at zero driving force is not the same for oxidation and reduction of the ferrocene labels. Moreover, the presence of ions, such as Sr²⁺, that strongly ion pair with the negatively charged DNA backbone modulates the electron transfer rate significantly. Specifically, k_app^o = 246 ± 23.5 and 14 ± 1.2 s^-1 for reduction and oxidation, respectively, where the Sr²⁺ concentration is 10 mM, but the corresponding values in 1 M Sr²⁺ are 8 ± 0.8 and 150 ± 12 s^-1. While other factors may be involved, these results are consistent with a model in which a low Sr²⁺ concentration and an initial potential that is negative of the PZC lead to electrostatic repulsion of the negatively charged DNA backbone and the negatively charged electrode. This leads to the DNA adopting an extended configuration (concertina open), resulting in a slow rate of heterogeneous electron transfer. In contrast, for ferrocene reduction, the initial potential is positive of PZC and the negatively charged DNA is electrostatically attracted to the electrode (concertina closed), giving a shorter electron transfer distance and a higher rate of heterogeneous electron transfer. When the Sr²⁺ concentration is high, the charge on the DNA backbone is compensated by the electrolyte and the charge on the electrode dominates the electron transfer dynamics and the opposite potential dependence is observed. These results open up the possibility of electromechanical switching using DNA superstructures.

Single-Molecule Analysis of Nanocircle-Embedded I-Motifs under Crowding

Cytosine (C)-rich regions of single-stranded DNA or RNA can fold into a tetraplex structure called i-motifs, which are typically stable under acidic pHs due to the need for protons to stabilize C-C interactions. While new studies have shown evidence for the formation of i-motifs at neutral and even physiological pH, it is not clear whether i-motifs can stably form in cells where DNA experiences topological constraint and crowding. Similarly, several studies have shown that a molecularly crowded environment promotes the formation of i-motifs at physiological pH; however, whether the intracellular crowding counteracts the topological destabilization of i-motifs is yet to be investigated. In this manuscript, using fluorescence resonance energy transfer (FRET)-based single-molecule analyses of human telomeric (hTel) i-motifs embedded in nanocircles as a proof-of-concept platform, we investigated the overall effects of crowding and topological constraint on the i-motif behavior. The smFRET analysis of the nanoassembly showed that the i-motif remains folded at pH 5.5 but unfolds at higher pHs. However, in the presence of a crowder (30% PEG 6000), i-motifs are formed at physiological pH overcoming the topological constraint imposed by the DNA nanocircles. Analysis of FRET-time traces show that the hTel sequence primarily assumes the folded state at pH ≤7.0 under crowding, but it undergoes slow conformational transitions between the folded and unfolded states at physiological pH. Our demonstration that the i-motif can form under cell-mimic crowding and topologically constrained environments may provide new insights into the potential biological roles of i-motifs and also into the design and development of i-motif-based biosensors, therapy, and other nanotechnological applications.

Modular Design of G-Quadruplex MetalloDNAzymes for Catalytic C-C Bond Formations with Switchable Enantioselectivity

Metal-binding DNA structures with catalytic function are receiving increasing interest. Although a number of metalloDNAzymes have been reported to be highly efficient, the exact coordination/position of their catalytic metal center is often unknown. Here, we present a new approach to rationally develop metalloDNAzymes for Lewis acid-catalyzed reactions such as enantioselective Michael additions. Our strategy relies on the predictable folding patterns of unimolecular DNA G-quadruplexes, combined with the concept of metal-mediated base-pairing. Transition-metal coordination environments were created in G-quadruplex loop regions, accessible by substrates. Therefore, protein-inspired imidazole ligandoside L was covalently incorporated into a series of G-rich DNA strands by solid-phase synthesis. Iterative rounds of DNA sequence design and catalytic assays allowed us to select tailored metalloDNAzymes giving high conversions and excellent enantioselectivities (≥99%). Based on their primary sequence, folding pattern, and metal coordination mode, valuable information on structure-activity relationships could be extracted. Variation of the number and position of ligand L within the sequence allowed us to control the formation of (S) and (R) enantiomeric reaction products, respectively.

Structures and stability of simple DNA repeats from bacteria

DNA is a fundamentally important molecule for all cellular organisms due to its biological role as the store of hereditary, genetic information. On the one hand, genomic DNA is very stable, both in chemical and biological contexts, and this assists its genetic functions. On the other hand, it is also a dynamic molecule, and constant changes in its structure and sequence drive many biological processes, including adaptation and evolution of organisms. DNA genomes contain significant amounts of repetitive sequences, which have divergent functions in the complex processes that involve DNA, including replication, recombination, repair, and transcription. Through their involvement in these processes, repetitive DNA sequences influence the genetic instability and evolution of DNA molecules and they are located non-randomly in all genomes. Mechanisms that influence such genetic instability have been studied in many organisms, including within human genomes where they are linked to various human diseases. Here, we review our understanding of short, simple DNA repeats across a diverse range of bacteria, comparing the prevalence of repetitive DNA sequences in different genomes. We describe the range of DNA structures that have been observed in such repeats, focusing on their propensity to form local, non-B-DNA structures. Finally, we discuss the biological significance of such unusual DNA structures and relate this to studies where the impacts of DNA metabolism on genetic stability are linked to human diseases. Overall, we show that simple DNA repeats in bacteria serve as excellent and tractable experimental models for biochemical studies of their cellular functions and influences.

Epigenetic modification of cytosines fine tunes the stability of i-motif DNA

i-Motifs are widely used in nanotechnology, play a part in gene regulation and have been detected in human nuclei. As these structures are composed of cytosine, they are potential sites for epigenetic modification. In addition to 5-methyl- and 5-hydroxymethylcytosine modifications, recent evidence has suggested biological roles for 5-formylcytosine and 5-carboxylcytosine. Herein the human telomeric i-motif sequence was used to examine how these four epigenetic modifications alter the thermal and pH stability of i-motifs. Changes in melting temperature and transitional pH depended on both the type of modification and its position within the i-motif forming sequence. The cytosines most sensitive to modification were next to the first and third loops within the structure. Using previously described i-motif forming sequences, we screened the MCF-7 and MCF-10A methylomes to map 5-methylcytosine and found the majority of sequences were differentially methylated in MCF7 (cancerous) and MCF10A (non-cancerous) cell lines. Furthermore, i-motif forming sequences stable at neutral pH were significantly more likely to be epigenetically modified than traditional acidic i-motif forming sequences. This work has implications not only in the epigenetic regulation of DNA, but also allows discreet tunability of i-motif stability for nanotechnological applications.

Tricky Topology: Persistence of Folded Human Telomeric i-Motif DNA at Ambient Temperature and Neutral pH

i-Motifs are four-stranded DNA structures formed from sequences rich in cytosine, held together by hemi-protonated cytosine-cytosine base pairs. These structures have been utilized extensively as pH-switches in DNA-based nanotechnology. Recently there has been an increasing interest in i-motif structures in biology, fuelled by examples of when these can form under neutral conditions. Herein we describe a cautionary tale regarding handling of i-motif samples. Using CD and UV spectroscopy we show that it is important to be consistent in annealing i-motif DNA samples as at neutral pH, i-motif unfolding kinetics is dependent on the time allowed for annealing and equilibration. We describe how the quadruplex structure formed by the human telomeric i-motif sequence can be shown to form and persist in the same conditions of neutral pH and ambient temperature in which, once at thermodynamic equilibrium, it exists predominantly as a random coil. This study has implications not only for work with i-motif DNA structures, but also in the uses and applications of these in nanotechnological devices.

Heteroleptic Coordination Environments in Metal-Mediated DNA G-Quadruplexes

The presence of metal centers with often highly conserved coordination environments is crucial for roughly half of all proteins, having structural, regulatory, or enzymatic function. To understand and mimic the function of metallo-enzymes, bioinorganic chemists pursue the challenge of synthesizing model compounds with well-defined, often heteroleptic metal sites. Recently, we reported the design of tailored homoleptic coordination environments for various transition metal cations based on unimolecular DNA G-quadruplex structures, templating the regioselective positioning of imidazole ligandosides L^I. Here, we expand this modular system to more complex, heteroleptic coordination environments by combining L^I with a new benzoate ligandoside L^B within the same oligonucleotide. The modifications still allow the correct folding of parallel tetramolecular and antiparallel unimolecular G-quadruplexes. Interestingly, the incorporation of L^B results in strong destabilization expressed in lower thermal denaturation temperatures T_m. While no transition metal cations could be bound by G-quadruplexes containing only L^B, heteroleptic derivatives containing both L^I and L^B were found to complex Cu^II, Ni^II, and Zn^II. Especially in case of Cu^II we found strong stabilizations of up to ΔT_m = +34°C. The here shown system represents an important step toward the design of more complex coordination environments inside DNA scaffolds, promising to culminate in the preparation of functional metallo-DNAzymes.

A comparison of the radiosensitisation ability of 22 different element metal oxide nanoparticles using clinical megavoltage X-rays

Background

A wide range of nanoparticles (NPs), composed of different elements and their compounds, are being developed by several groups as possible radiosensitisers, with some already in clinical trials. However, no systematic experimental survey of the clinical X-ray radiosensitising potential of different element nanoparticles has been made. Here, we directly compare the irradiation-induced (10 Gy of 6-MV X-ray photon) production of hydroxyl radicals, superoxide anion radicals and singlet oxygen in aqueous solutions of the following metal oxide nanoparticles: Al2O3, SiO2, Sc2O3, TiO2, V2O5, Cr2O3, MnO2, Fe3O4, CoO, NiO, CuO, ZnO, ZrO2, MoO3, Nd2O3, Sm2O3, Eu2O3, Gd2O3, Tb4O7, Dy2O3, Er2O3 and HfO2. We also examine DNA damage due to these NPs in unirradiated and irradiated conditions.

Results

Without any X-rays, several NPs produced more radicals than water alone. Thus, V2O5 NPs produced around 5-times more hydroxyl radicals and superoxide radicals. MnO2 NPs produced around 10-times more superoxide anions and Tb4O7 produced around 3-times more singlet oxygen. Lanthanides produce fewer hydroxyl radicals than water. Following irradiation, V2O5 NPs produced nearly 10-times more hydroxyl radicals than water. Changes in radical concentrations were determined by subtracting unirradiated values from irradiated values. These were then compared with irradiation-induced changes in water only. Irradiation-specific increases in hydroxyl radical were seen with most NPs, but these were only significantly above the values of water for V2O5, while the Lanthanides showed irradiation-specific decreases in hydroxyl radical, compared to water. Only TiO2 showed a trend of irradiation-specific increase in superoxides, while V2O5, MnO2, CoO, CuO, MoO3 and Tb4O7 all demonstrated significant irradiation-specific decreases in superoxide, compared to water. No irradiation-specific increases in singlet oxygen were seen, but V2O5, NiO, CuO, MoO3 and the lanthanides demonstrated irradiation-specific decreases in singlet oxygen, compared to water. MoO3 and CuO produced DNA damage in the absence of radiation, while the highest irradiation-specific DNA damage was observed with CuO. In contrast, MnO2, Fe3O4 and CoO were slightly protective against irradiation-induced DNA damage.

Conclusions

Beyond identifying promising metal oxide NP radiosensitisers and radioprotectors, our broad comparisons reveal unexpected differences that suggest the surface chemistry of NP radiosensitisers is an important criterion for their success.

Tailored Transition-Metal Coordination Environments in Imidazole-Modified DNA G-Quadruplexes

Two types of imidazole ligands were introduced both at the end of tetramolecular and into the loop region of unimolecular DNA G‐quadruplexes. The modified oligonucleotides were shown to complex a range of different transition‐metal cations including Ni^II, Cu^II, Zn^II and Co^II, as indicated by UV/Vis absorption spectroscopy and ion mobility mass spectrometry. Molecular dynamics simulations were performed to obtain structural insight into the investigated systems. Variation of ligand number and position in the loop region of unimolecular sequences derived from the human telomer region (htel) allows for a controlled design of distinct coordination environments with fine‐tuned metal affinities. It is shown that Cu^II, which is typically square‐planar coordinated, has a higher affinity for systems offering four ligands, whereas Ni^II prefers G‐quadruplexes with six ligands. Likewise, the positioning of ligands in a square‐planar versus tetrahedral fashion affects binding affinities of Cu^II and Zn^II cations, respectively. Gaining control over ligand arrangement patterns will spur the rational development of transition‐metal‐modified DNAzymes. Furthermore, this method is suited to combine different types of ligands, for example, those typically found in metalloenzymes, inside a single DNA architecture.

On the Enzymatic Formation of Metal Base Pairs with Thiolated and pKa -Perturbed Nucleotides

The formation of artificial metal base pairs is an alluring and versatile method for the functionalization of nucleic acids. Access to DNA functionalized with metal base pairs is granted mainly by solid-phase synthesis. An alternative, yet underexplored method, envisions the installation of metal base pairs through the polymerization of modified nucleoside triphosphates. Herein, we have explored the possibility of using thiolated and pK_a -perturbed nucleotides for the enzymatic construction of artificial metal base pairs. The thiolated nucleotides S2C, S6G, and S4T as well as the fluorinated analogue 5FU are readily incorporated opposite a templating S4T nucleotide through the guidance of metal cations. Multiple incorporation of the modified nucleotides along with polymerase bypass of the unnatural base pairs are also possible under certain conditions. The thiolated nucleotides S4T, S4T, S2C, and S6G were also shown to be compatible with the synthesis of modified, high molecular weight single-stranded (ss)DNA products through TdT-mediated tailing reactions. Thus, sulfur-substitution and pK_a perturbation represent alternative strategies for the design of modified nucleotides compatible with the enzymatic construction of metal base pairs.

Metal-Modified Nucleic Acids: Metal-Mediated Base Pairs, Triples, and Tetrads

The incorporation of metal ions into nucleic acids by means of metal-mediated base pairs represents a promising and prominent strategy for the site-specific decoration of these self-assembling supramolecules with metal-based functionality. Over the past 20 years, numerous nucleoside surrogates have been introduced in this respect, broadening the metal scope by providing perfectly tailored metal-binding sites. More recently, artificial nucleosides derived from natural purine or pyrimidine bases have moved into the focus of Ag^I -mediated base pairing, due to their expected compatibility with regular Watson-Crick base pairs. This minireview summarizes these advances in metal-mediated base pairing but also includes further recent progress in the field. Moreover, it addresses other aspects of metal-modified nucleic acids, highlighting an expansion of the concept to metal-mediated base triples (in triple helices and three-way junctions) and metal-mediated base tetrads (in quadruplexes). For all types of metal-modified nucleic acids, proposed or accomplished applications are briefly mentioned, too.

i-Motif DNA: structural features and significance to cell biology

The i-motif represents a paradigmatic example of the wide structural versatility of nucleic acids. In remarkable contrast to duplex DNA, i-motifs are four-stranded DNA structures held together by hemi- protonated and intercalated cytosine base pairs (C:C⁺). First observed 25 years ago, and considered by many as a mere structural oddity, interest in and discussion on the biological role of i-motifs have grown dramatically in recent years. In this review we focus on structural aspects of i-motif formation, the factors leading to its stabilization and recent studies describing the possible role of i-motifs in fundamental biological processes.

Coordination-induced structural changes of DNA-based optical and electrochemical sensors for metal ions detection

Metal ions play a critical role in human health and abnormal levels are closely related to various diseases. Therefore, the detection of metal ions with high selectivity, sensitivity and accuracy is particularly important. This article highlights and comments on the coordination-induced structural changes of DNA-based optical, electrochemical and optical-electrochemical-combined sensors for metal ions detection. Challenges and potential solutions of DNA-based sensors for the simultaneous detection of multiple metal ions are also discussed for further development and exploitation.

Chemical Regulation of DNA i-Motifs for Nanobiotechnology and Therapeutics

DNA sequences rich in cytosine have the propensity, under acidic pH, to fold into four-stranded intercalated DNA structures called i-motifs. Recent studies have provided significant breakthroughs that demonstrate how chemists can manipulate these structures for nanobiotechnology and therapeutics. The first section of this Minireview discusses the development of advanced functional nanostructures by synthetic conjugation of i-motifs with organic scaffolds and metal nanoparticles and their role in therapeutics. The second section highlights the therapeutic targeting of i-motifs with chemical scaffolds and their significance in biology. For this, first we shed light on the long-lasting debate regarding the stability of i-motifs under physiological conditions. Next, we present a comparative analysis of recently reported small molecules for specifically targeting i-motifs over other abundant DNA structures and modulating their function in cellular systems. These advances provide new insights into i-motif-targeted regulation of gene expression, telomere maintenance, and therapeutic applications.

Imidazole-modified G-quadruplex DNA as metal-triggered peroxidase

Four imidazoles, serving as metalloprotein-inspired ligands for complexing a range of transition metal cations, were incorporated into tetramolecular G-quadruplex DNA structures. Modified quadruplexes were found to complex Cu(ii), Ni(ii), Zn(ii) and Co(ii) in a 1 : 1 ratio with unprecedented strong thermal stabilizations of up to ΔT _1/2 = +51 °C. Furthermore, addition of Cu(ii) was found to lead to extraordinarily fast G-quadruplex association rates with k _on values being ∼100 times higher compared to unmodified G-quadruplexes. This is ascribed to a template effect of Cu(ii), preorganizing the four single strands via coordination, followed by rapid formation of hydrogen-bonded G-quartets. Native electrospray ionization mass spectrometry (ESI), coupled with trapped ion-mobility spectrometry (timsTOF), supports the proposed 1 : 1 G-quadruplex-metal complexes and could further disclose their ability to bind the iron-porphyrin complex hemin in a 1 : 1 stoichiometry. DNA sequence design allowed us to equip this G-quadruplex-hemin complex, known to function as a horseradish peroxidase mimic, with a metal-dependent trigger. A competitive screen of transition metals revealed a high selectivity for Cu(ii), even in mixtures of several divalent metal cations. Once formed, the Cu(ii)-carrying DNAzyme was shown to be preserved in the presence of EDTA, attributed to its remarkable kinetic stability. Stimuli-responsive G-quadruplexes promise application in DNAzymes with switchable activity, adaptive sensors and dynamic DNA origami constructs.