Control over π-π stacking of heteroheptacene-based nonfullerene acceptors for 16% efficiency polymer solar cells

Self-assembled carrier-free formulations based on medicinal and food active ingredients

The popularity of medicinal plants, which have a unique system and are mostly used in compound form for the prevention and treatment of a wide range of diseases, is growing worldwide. In recent years, with advances in chemical separation and structural analysis techniques, many of the major bioactive molecules of medicinal plants have been identified. However, the active ingredients in medicinal plants often possess chemical characteristics, including poor water solubility, stability and bioavailability, which limit their therapeutic applications. To address this problem, self-assembly of small molecules from medicinal food sources provides a new strategy. Driven by various types of acting forces, medicinal small molecules with modifiable groups, multiple sites of action, hydrophobic side chains, and rigid backbones with self-assembly properties are able to form various supramolecular network hydrogels, nanoparticles, micelles, and other self-assemblies. This review first summarizes the forms of self-assemblies such as supramolecular network hydrogels, nanoparticles, and micelles at the level of the action site, and discusses the recent studies on the active ingredients in medicinal plants that can be used for self-assembly, in addition to summarizing the advantages of self-assemblies for a variety of disease applications, including wound healing, antitumor, anticancer, and diabetes mellitus. Finally, the problems of self-assemblers and the possible directions for future development are presented. We firmly believe that self-assemblers have the potential to develop effective compounds from drug-food homologous plants, providing valuable information for drug research and new strategies and perspectives for the modernization of Chinese medicine.

20.4% Power conversion efficiency from albedo-collecting organic solar cells under 0.2 albedo

Highly efficient bifacial organic solar cells (OSCs) have not been reported due to limited thickness of the active layer in conventional configurations, not allowing for efficient harvesting of front sunlight and albedo light. Here, bifacial OSCs are reported with efficiency higher than the monofacial counterparts. The incorporation of pyramid-based asymmetrical optical transmission (AOT) array to a transparent silver electrode suppresses the escaping of front sunlight without sacrificing the harvesting of albedo light. Parasitic absorption induced by the excitation of surface plasmons in an AOT electrode is further reduced by doping organic emitter in electron transport layer and capping high dielectric constant film to silver. The rear electrode achieves a front transmittance of 7% and a rear transmission of 86%. At a conventional albedo of 0.2, the synergistic effect of AOT and minimized optical loss endow the bifacial OSCs with power conversion efficiency of 20.4%. This work paves the way for the utilization of albedo light in OSCs.

Dimerized M-Series Acceptors with Low Diffusion Coefficients for Efficient and Stable Polymer Solar Cells

As the simplest oligomeric acceptors, dimerized acceptors (DAs) are easier to synthesize, and more importantly, they can retain good intermolecular interaction and photovoltaic properties of their parent small-molecule acceptors (SMAs). Nevertheless, currently most efficient DAs are derived from banana-shaped acceptors and they might suffer from inferior device stability with high diffusion coefficients. Herein, we design and synthesize two planar DAs (DMT-FH and DMT-HF) by bridging two linear-shaped M-series SMAs with a thiophene unit. The effects of fluorination position on the diffusion coefficients, power conversion efficiencies (PCEs) and stability of the DAs are systematically studied. Our results suggest that DMT-HF with fluorination on the ending indanone groups shows enhanced intermolecular interactions, improved PCE and stability compared with the counterpart (DMT-FH) with fluorination on the central indanone groups. Further optimization on the DMT-HF-based devices yields an outstanding PCE of 17.17 %, which is the highest among all linear-shaped SMA-based DAs. Notably, with the low diffusion coefficient (3.36×10-24 cm2 s-1) of DMT-HF, the resulting device retains over 93 % of the initial PCE after 5000 h of continuous heating at 85 °C, suggesting its excellent thermal stability. The results highlight the importance of intermolecular interaction and fluorination for achieving efficient and stable polymer solar cells.

Polymerizing M-Series Acceptors for Efficient Polymer Solar Cells: Effect of the Molecular Shape

Currently, high-performance polymerized small-molecule acceptors (PSMAs) based on ADA-type SMAs are still rare and greatly demanded for polymer solar cells (PSCs). Herein, two novel regioregular PSMAs (PW-Se and PS-Se) are designed and synthesized by using centrosymmetric (linear-shaped) and axisymmetric (banana-shaped) ADA-type SMAs as the main building blocks, respectively. It is demonstrated that photovoltaic performance of the PSMAs can be significantly improved by optimizing the configuration of ADA-type SMAs. Compared to the axisymmetric SMA-based polymer (PS-Se), PW-Se using a centrosymmetric SMA as the main building block exhibits better backbone coplanarity thereby resulting in bathochromically shifted absorption with a higher absorption coefficient, tighter interchain π-π stacking, and more favorable blend film morphology. As a result, enhanced and more-balanced charge transport, better exciton dissociation, and reduced charge recombination are achieved for PW-Se-based devices with PM6 as polymer donor. Benefiting from these positive factors, the optimal PM6:PW-Se-based device exhibits a higher power conversion efficiency (PCE) of 15.65% compared to the PM6:PS-Se-based device (8.90%). Furthermore, incorporation of PW-Se as a third component in the binary active layer of PM6:M36 yields ternary devices with an outstanding PCE of 18.0%, which is the highest value for PSCs based on ADA-type SMAs, to the best of the knowledge.

Balancing Flexible Side Chains on 2D Conjugated Acceptors Enables High-Performance Organic Solar Cell

Balancing the rigid backbones and flexible side chains of light-harvesting materials is crucially important to reach optimized intermolecular packing, micromorphology, and thus photovoltaic performance of organic solar cells (OSCs). Herein, based on a distinctive CH-series acceptor platform with 2D conjugation extended backbones, a series of nonfullerene acceptors (CH-6F-Cn) are synthesized by delicately tuning the lengths of flexible side chains from n-octyl to n-amyl. A systemic investigation has revealed that the variation of the side chain's length can not only modulate intermolecular packing modes and crystallinity but also dramatically improve the micromorphology of the active layer and eventual photovoltaic parameters of OSCs. Consequently, the highest PCE of 18.73% can be achieved by OSCs employing D18:PM6:CH-6F-C8 as light-harvesting materials.

Dimeric Giant Molecule Acceptors Featuring N-type Linker: Enhancing Intramolecular Coupling for High-Performance Polymer Solar Cells

Giant molecular acceptors (GMAs) are typically designed through the conjugated linking of individual small molecule acceptors (SMAs). This design imparts an extended molecular size, elevating the glass transition temperature (Tg) relative to their SMA counterparts. Consequently, it effectively suppresses the thermodynamic relaxation of the acceptor component when blended with polymer donors to construct stable polymer solar cells (PSCs). Despite their merits, the optimization of their chemical structure for further enhancing of device performance remains challenge. Different from previous reports utilizing p-type linkers, here, we explore an n-type linker, specifically the benzothiadiazole unit, to dimerize the SMA units via a click-like Knoevenagel condensation, affording BT-DL. In comparison with B-DL with a benzene linkage, BT-DL exhibits significantly stronger intramolecular super-exchange coupling, a desirable property for the acceptor component. Furthermore, BT-DL demonstrates a higher film absorption coefficient, redshifted absorption, larger crystalline coherence, and higher electron mobility. These inherent advantages of BT-DL translate into a higher power conversion efficiency of 18.49 % in PSCs, a substantial improvement over the 9.17 % efficiency observed in corresponding devices with B-DL as the acceptor. Notably, the BT-DL based device exhibits exceptional stability, retaining over 90 % of its initial efficiency even after enduring 1000 hours of thermal stress at 90 °C. This work provides a cost-effective approach to the synthesis of n-type linker-dimerized GMAs, and highlight their potential advantage in enhancing intramolecular coupling for more efficient and durable photovoltaic technologies.

Recent progress and prospects of dimer and multimer acceptors for efficient and stable polymer solar cells

High power conversion efficiency (PCE) and long-term stability are essential prerequisites for the commercialization of polymer solar cells (PSCs). Small-molecule acceptors (SMAs) are core materials that have led to recent, rapid increases in the PCEs of the PSCs. However, a critical limitation of the resulting PSCs is their poor long-term stability. Blend morphology degradation from rapid diffusion of SMAs with low glass transition temperatures (Tgs) is considered the main cause of the poor long-term stability of the PSCs. The recent emergence of oligomerized SMAs (OSMAs), composed of two or more repeating SMA units (i.e., dimerized and trimerized SMAs), has shown great promise in overcoming these challenges. This innovation in material design has enabled OSMA-based PSCs to reach impressive PCEs near 19% and exceptional long-term stability. In this review, we summarize the evolution of OSMAs, including their research background and recent progress in molecular design. In particular, we discuss the mechanisms for high PCE and stability of OSMA-based PSCs and suggest useful design guidelines for high-performance OSMAs. Furthermore, we reflect on the existing hurdles and future directions for OSMA materials towards achieving commercially viable PSCs with high PCEs and operational stabilities.

Toward Quantifying the Relation between Exciton Binding Energies and Molecular Packing

Reducing the exciton binding energy E_b of organic photoactive materials is critical to minimize the energy loss and improve the photovoltaic efficiency of organic solar cells. However, the relation between the E_b and molecular packing is not well understood. Herein, the E_b in the crystals of a series of A-D-A type nonfullerene acceptors with different lengths of alkyl side chains has been examined by self-consistent quantum mechanics/embedded charge calculations. The variation of molecular packing induced by the different alkyl chains can have an important impact on the polarization effect of charge carriers and thereby the E_b. More interestingly, the E_b values are found to be linearly increased with the ratio of the void fraction vs the packing coefficient of molecular backbones in the solid crystals. Owing to the smallest ratio, a remarkable low E_b of several tens of meV is achieved for the acceptor with an optimal length of alkyl chains.

Perylene Diimide-Fused Dithiophenepyrroles with Different End Groups as Acceptors for Organic Photovoltaics

In this study, we synthesized four new A-DA'D-A acceptors (where A and D represent acceptor and donor chemical units) incorporating perylene diimide units (A') as their core structures and presenting various modes of halogenation and substitution of the functional groups at their end groups (A). In these acceptors, by fusing dithiophenepyrrole (DTP) moieties (D) to the helical perylene diimide dimer (hPDI) to form fused-hPDI (FhPDI) cores, we could increase the D/A' oscillator strength in the cores and, thus, the intensity of intramolecular charge transfer (ICT), thereby enhancing the intensity of the absorption bands. With four different end group units─IC2F, IC2Cl, IO2F, and IO2Cl─tested, each of these acceptor molecules exhibited different optical characteristics. Among all of these systems, the organic photovoltaic device incorporating the polymer PCE10 blended with the acceptor FhPDI-IC2F (1:1.1 wt %) had the highest power conversion efficiency (PCE) of 9.0%; the optimal PCEs of PCE10:FhPDI-IO2F, PCE10:FhPDI-IO2Cl, and PCE10:FhPDI-IC2Cl (1:1.1 wt %) devices were 5.2, 4.7, and 7.7%, respectively. The relatively high PCE of the PCE10:FhPDI-IC2F device resulted primarily from the higher absorption coefficients of the FhPDI-IC2F acceptor, lower energy loss, and more efficient charge transfer; the FhPDI-IC2F system experienced a lower degree of geminate recombination─as a result of improved delocalization of π-electrons along the acceptor unit─relative to that of the other three acceptors systems. Thus, altering the end groups of multichromophoric PDI units can increase the PCEs of devices incorporating PDI-derived materials and might also be a new pathway for the creation of other valuable fused-ring derivatives.

Molecular-Shape-Controlled Nonfused Ring Electron Acceptors for High-Performance Organic Solar Cells with Tunable Phase Morphology

Two nonfused ring electron acceptors (NFREAs), BTh-OC8-2F and DTh-OC8-2F, with different molecular shapes are designed and synthesized. Both acceptors can form planar molecular shapes by the assistance of S···O intramolecular interactions. Differently, BTh-OC8-2F, with a linear molecular backbone and two trans-arranged side chains at the core unit, exhibits much stronger crystallinity than DTh-OC8-2, with a C-shape molecular shape and two cis-arranged steric side chains at the core unit. Thus, the DTh-OC8-2F based blend film displays a better nanoscale phase separation, more suppressed charge recombination, more efficient exciton dissociation, and lower nonradiative energy loss. Organic solar cells based on DTh-OC8-2F can deliver a power conversion efficiency of 14.13%, which is much higher than BTh-OC8-2F based ones (11.95%) and is also one of the highest values reported for organic solar cells based on NFREAs.

Structural Phase Transitions in Anthracene Crystals

Anthracene (C14 H10 ) and its derivatives, π-conjugated molecules in acenes, have been widely researched in terms of their reactions, physical properties, and self-assembly (or crystal engineering). These molecules can be functionalized to tune reactivities, optoelectronic properties, and self-assembling abilities. Structural changes in the molecular assemblies, solid states, and crystals have recently been discovered. Therefore, a systematic discussion of anthracene's molecular structure, packing, and optical properties based on its intermolecular structure and phase transitions is important for future chemical and structural design. In the present review, we discuss anthracene's molecular design, dimer packing, and crystal structure, focusing on the structural phase transitions of its crystals. We also provide examples of the phase transitions of anthracene crystals. Changes to edge-to-face of CH-π interaction and face-to-face packing of π-π interaction affect the thermodynamic stabilities of various crystal structures. These structures can inform the prediction of structural and physical properties.

Designing High-Performance Nonfused Ring Electron Acceptors via Synergistically Adjusting Side Chains and Electron-Withdrawing End-Groups

Three nonfused ring electron acceptors, Hexyl-0F, Isopropyl-0F, and Isopropyl-2F, are designed and synthesized. Unlike Hexyl-0F, Isopropyl-0F with two sterically hindered 2,4,6-triisopropyl-phenyl groups is highly soluble, which provides a good opportunity for solution processability. Compared with Isopropyl-0F, Isopropyl-2F with fluorinated end-groups exhibits red-shifted absorption. Due to these synergistic adjustment, Isopropyl-2F-based devices displayed a high power conversion efficiency of 12.55%, higher than that of Isopropyl-0F (9.49%). The result demonstrates that the introduction of large steric substituents in the π-bridge units and electron-withdrawing end-groups plays a positive role in the construction of high-efficiency nonfused ring electron acceptors.

Boosted efficiency over 18.1% of polymer solar cells by employing large extinction coefficients material as the third component

Series of binary and ternary polymer solar cells (PSCs) were successfully fabricated with PM6 as donor, m-BTP-PhC6 and Y6 as acceptor. The optimal ternary PSCs achieve a power conversion efficiency (PCE) of 18.14% by incorporating 20 wt% Y6 in acceptors, benefiting from the increased short circuit current density (J_SC ) of 26.53 mA cm^-2 and fill factor (FF) of 78.51% in comparison with the J_SC s (25.05 mA cm^-2 and 25.65 mA cm^-2 ) and the FFs (77.13% and 76.55%) of binary PSCs with m-BTP-PhC6 or Y6 as acceptor. The photon harvesting ability of ternary active layers can be enhanced by incorporating appropriate Y6, which can be confirmed from the EQE spectral difference of the optimized ternary and binary PSCs, especially in the wavelength range from 680 nm to 800 nm. The refractive index and extinction coefficients of binary and ternary blend films were measured, which can well support the effect of Y6 incorporation on photon harvesting ability in different wavelength range. Meanwhile, the appropriate Y6 incorporation with large extinction coefficients can be considered as morphology regulator, which can be confirmed from the enhanced FF and the more balanced charge transport in the optimal ternary PSCs. Photogenerated exciton distribution in active layers was simulated by transmission matrix method based on the Beer-Lambert law. The photogenerated exciton density can be enhanced in the middle of active layers by incorporating 20 wt% Y6 in acceptors, which is conducive to charge collection by individual electrode, resulting in the simultaneously enhanced J_SC and FF of the optimal ternary PSCs. This work indicates that an appropriate third component will play versatile roles in improving the performance of PSCs via enhancing photon harvesting and optimizing photogeneration exciton distribution for better charge collection. This article is protected by copyright. All rights reserved.

Performance and selectivity of amphiphilic pillar[5]arene as stationary phase for capillary gas chromatography

Pillar[n]arenes possess highly symmetrical and rigid pillar-shaped architecture with π-electron rich cavity that afford their reliable host-guest recognition interactions towards matched guests. In this work, a novel amphiphilic pillar[5]arene (P5A-C10-2NH₂) was designed, synthesized and employed as the stationary phase for capillary gas chromatography. To date, they have not been reported in the field of chromatography. The P5A-C10-2NH₂ capillary column (10 m × 0.25 mm i.d.) was prepared by static coating method. Its capillary column exhibited moderate polarity and column efficiency of 2265 plates/m determined by naphthalene at 120 °C. As evidenced, the P5A-C10-2NH₂ column achieved advantageous separation performance for a mixture of 24 analytes of diverse types and exhibited different chromatographic selectivity from two pillar[5]arene derivatives columns and commercial HP-35 column with 35%-phenyl-methylpolysiloxane. Moreover, the P5A-C10-2NH₂ column baseline resolved more than a dozen positional and cis-trans isomers. Furthermore, the separation mechanism of P5A-C10-2NH₂ column was discussed by quantum chemical calculations. In addition, the P5A-C10-2NH₂ column had high thermal stability and excellent separation repeatability 0.01-0.04% for run-to-run, 0.03-0.17% for day-to-day and 3.2-3.9% for column-to-column. The special amphiphilic structure and high resolution for various analytes reveal the good potential of pillararenes as a new class of stationary phases for chromatographic analyses. Moreover, the TPG column achieved improved thermal stability over the GIL column and excellent repeatability.

Blending Donors with Different Molecular Weights: An Efficient Strategy to Resolve the Conflict between Coherence Length and Intermixed Phase in Polymer/Nonfullerene Solar Cells

Long coherence lengths (CLs) of crystals and proper intermixed phase amount guarantee charge transport and exciton dissociate efficiently, which is crucial for organic solar cells (OSCs) to achieve high device performance. However, extending CLs usually reduces the intermixed phase, leading to an insufficient interface for exciton dissociation. Herein, a strategy using a binary polymer with different molecular weights as donor is employed, that is, poly(3-hexylthiophene-2,5-diyl) (P3HT) with high (P3HT-H) and low (P3HT-L) molecular weight are blended as donor, and (5Z,5'Z)-5,5'-(((4,4,9,9-tetraoctyl-4,9-dihydro-s-indaceno[1,2-b:5,6-b']dithiophene-2,7-diyl)bis(benzo[c][1,2,5]thiadiazole-7,4-diyl))bis(methanylylidene))bis(3-ethyl-2-thioxothiazolidin-4-one) (O-IDTBR) is used as acceptor. In kinetics, the entanglements of P3HT-H are relieved due to the higher molecular diffusivity of P3HT-L. In thermodynamics, the miscibility of P3HT-L/O-IDTBR, P3HT-H/O-IDTBR, and P3HT-L/P3HT-H blends increases in turn. Hence, P3HT forms a more ordered structure with longer CLs after adding P3HT-L, which also drives O-IDTBR dispersed in P3HT crystalline regions diffuse to the O-IDTBR crystalline regions to further self-organize. Consequently, the CLs of both P3HT and O-IDTBR are extended, while keeping the intermixed phase amount proper. The optimized microstructure boosts device performance from 7.03% to 7.80%, which is one of the highest values reported for P3HT/O-IDTBR blends. This is a novel way to solve the conflict mentioned above, which may provide guidance to finely regulating the morphology of the active layer.

Over 17% Efficiency of Ternary Organic Photovoltaics Employing Two Acceptors with an Acceptor-Donor-Acceptor Configuration

Ternary organic photovoltaics (OPVs) were constructed with one wide-band-gap donor PM6 and two A-D-A-type acceptors (M-series M36 and MQ5) with similar chemical structures. Power conversion efficiency (PCE) of the optimal ternary OPVs reaches 17.24% with 20 wt % MQ5 content, arising from a simultaneously increased short circuit current density (J_SC) of 25.36 mA cm^-2 and a fill factor (FF) of 76.02% as compared to those of two binary OPVs. The photon harvesting of ternary active layers can be maximized by adjusting the MQ5 content by reason of the complementary absorption spectra of M36 and MQ5. The molecular arrangement of PM6 and M36 can be collectively optimized by introducing an appropriate amount of MQ5 as a morphology regulator for facilitating effective charge transportation in ternary active layers. The improved photon harvesting and charge transport in active layers should be two important factors responsible for J_SC and FF improvement of optimal ternary OPVs, respectively. More than an 8.8% improvement of PCE is achieved in ternary OPVs with an appropriate amount of MQ5 as the photon-harvesting enhancer and morphology regulator. The huge potential of A-D-A-type materials in constructing highly efficient OPVs can be further exploited based on a ternary strategy.

Recent Progress in the Design of Fused-Ring Non-Fullerene Acceptors-Relations between Molecular Structure and Optical, Electronic, and Photovoltaic Properties

Organic solar cells are on the dawn of the next era. The change of focus toward non-fullerene acceptors has introduced an enormous amount of organic n-type materials and has drastically increased the power conversion efficiencies of organic photovoltaics, now exceeding 18%, a value that was believed to be unreachable some years ago. In this Review, we summarize the recent progress in the design of ladder-type fused-ring non-fullerene acceptors in the years 2018-2020. We thereby concentrate on single layer heterojunction solar cells and omit tandem architectures as well as ternary solar cells. By analyzing more than 700 structures, we highlight the basic design principles and their influence on the optical and electrical structure of the acceptor molecules and review their photovoltaic performance obtained so far. This Review should give an extensive overview of the plenitude of acceptor motifs but will also help to understand which structures and strategies are beneficial for designing materials for highly efficient non-fullerene organic solar cells.

Boosting the Efficiency of Non-fullerene Organic Solar Cells via a Simple Cathode Modification Method

This work demonstrates a simple yet effective method to significantly improve the power conversion efficiency (PCE) of highly efficient non-fullerene organic solar cells by mixing two electron transport materials. The new electron transport layer shows an energy level better aligned with the active layer and an improved morphology that could reduce the active layer-electrode contact. These improvements lead to enhanced charge extraction, better charge selectivity, suppressed exciton recombination, and finally a boosted PCE in the PM6:Y6-based solar cells. When applied in conjunction with the non-halogenated solvent-processed PM6:PY-IT-based active layer, the mixed ETL also gives rise to a leading result for binary all-polymer solar cells (PCE of >16%) with a concurrent increase in V_OC, J_SC, and FF.

Different Morphology Dependence for Efficient Indoor Organic Photovoltaics: The Role of the Leakage Current and Recombination Losses

Efficient indoor organic photovoltaics (OPVs) have attracted strong attention for their application in indoor electronic devices. However, the route to optimal photoactive film morphology toward high-performance indoor devices has remained obscure. The leakage current dominated by morphology exerts distinguishing influence on the performance under different illuminations. We have demonstrated that morphology reoptimization plays an important role in indoor OPVs, and their optimal structural features are different from what we laid out for outdoor devices. For indoor OPVs, in order to facilitate low leakage current, it is essential to enhance the crystallinity, phase separation, and domain purity, as well as keeping small surface roughness of the active layer. Furthermore, considering the reduced bimolecular recombination at low light intensity, we have shown that PM6:M36-based indoor devices can work effectively with a large ratio of the donor and acceptor. Our work correlating structure-performance relation and the route to optimal morphology outlines the control over device leakage current and recombination losses boosting the progress of efficient indoor OPVs.

Simultaneously Enhanced Efficiency and Operational Stability of Nonfullerene Organic Solar Cells via Solid-Additive-Mediated Aggregation Control

The additive strategy is widely used in optimizing the morphology of organic solar cells (OSCs). The majority of additives are liquid with high boiling points, which will be trapped within device and consequently deteriorate performance during operation. In this work, solid but volatile additives 2-(4-fluorobenzylidene)-1H-indene-1,3(2H)-dione (INB-F) and 2-(4-chlorobenzylidene)-1H-indene-1,3(2H)-dione (INB-Cl) are designed to replace the common 1,8-diiodooctane (DIO) in nonfullerene OSCs. These additives present during solution casting but evaporate after moderate heating. Molecular dynamics simulations show that they can reduce the adsorption energy to improve π-π stacking among nonfullerene acceptor (NFA) molecules, an effect that enhances light absorption and electron mobility. Both INB-F and INB-Cl enhance efficiency, with INB-F achieving a maximum efficiency of 16.7% from 15.1% of the reference PBDB-T-2F (PM6):BTP-BO-4F (Y6-BO) cell, and outperforming DIO. Remarkably, they can simultaneously enhance the operational stability, with the INB-F-treated OSC maintaining over 60% of the initial efficiency after 1000 h operation, demonstrating a T₈₀ lifetime of 523 h, which is a significant improvement over T₈₀ values of 66.2 h for the reference and 6.6 h for DIO-treated OSC. The simultaneously enhanced efficiency and operational lifetime are also effective in PM6:BTP-BO-4Cl (Y7-BO) OSCs, demonstrating a universal strategy to improve the performance of OSCs.

High-Performance Simple Nonfused Ring Electron Acceptors with Diphenylamino Flanking Groups

Four simple nonfused ring electron acceptors (H-2F, CH₃-2F, OCH₃-2F, and SCH₃-2F) were designed and synthesized. The use of diphenylamine derivatives as the flanking group for the construction of nonfused ring electron acceptors can improve solubility, avoid the formation of oversized aggregates, and enhance the intramolecular charge-transfer effect to extend absorption spectra. The substituent group at the diphenylamine unit has a great impact on the absorption and energy level of acceptors, electron mobility and morphology of blend films. Unlike the other three acceptors, CH₃-2F can form ordered molecular stacking and a face-on orientation in the donor/acceptor blend film. A single-crystal analysis demonstrates that CH₃-2F can form a two-dimensional electron transport network. Among these four acceptors, CH₃-2F-based organic solar cells provide the highest PCE of 12.28%. Our work has demonstrated that triarylamine is a helpful construction unit for low-cost and high efficiency nonfused ring electron acceptors.

Compatibility between Solubility and Enhanced Crystallinity of Benzotriazole-Based Small Molecular Acceptors with Less Bulky Alkyl Chains for Organic Solar Cells

Optimizing the molecular structures of organic solar cell (OSC) materials and boosting the power conversion efficiencies are the eternal theme in the solar energy region. A series of fused benzotriazole (BTA)-based A-DA'D-A structures of nonfullerene acceptors (such as Y18) were developed for application in efficient OSCs, in which high quantum efficiencies and low voltage losses could be achieved because of the optimized electron-deficient core and specific molecular geometry. Here, based on the BTA core, the bulky alkyl chain on the BTA unit was further tailored to minimize the lateral alkyl chains and enhance the crystallinity while maintaining an adequate solubility. The resulting NFAs of BTA-C1, BTA-C5, and BTA-C6 are synthesized. Compared with the well-designed molecular Y18 (BTA-C8), we found that simply replacing the 2-ethylhexyl chain with a single methyl (BTA-C1) can easily improve the fill factor up to 77%, but its poor light absorption capacity and large domain size impeded further efficiency improvement. In particular, the BTA-C5, with a shortened branch alkyl chain of 2-methylbutyl, achieves suitable solubility and enhanced crystallinity. Significantly, owing to the balanced charge carrier mobility and suitable phase separation, the BTA-C5-based binary single-junction OSCs achieve a high efficiency of 17.11%, which is one of the top values in BTA-based OSCs.

Approaching 18% efficiency of ternary organic photovoltaics with wide bandgap polymer donor and well compatible Y6 : Y6-1O as acceptor

A series of ternary organic photovoltaics (OPVs) are fabricated with one wide bandgap polymer D18-Cl as donor, and well compatible Y6 and Y6-1O as acceptor. The open-circuit-voltage (VOC ) of ternary OPVs is monotonously increased along with the incorporation of Y6-1O, indicating that the alloy state should be formed between Y6 and Y6-1O due to their excellent compatibility. The energy loss can be minimized by incorporating Y6-1O, leading to the VOC improvement of ternary OPVs. By finely adjusting the Y6-1O content, a power conversion efficiency of 17.91% is achieved in the optimal ternary OPVs with 30 wt% Y6-1O in acceptors, resulting from synchronously improved short-circuit-current density (JSC ) of 25.87 mA cm-2, fill factor (FF) of 76.92% and VOC of 0.900 V in comparison with those of D18-Cl : Y6 binary OPVs. The JSC and FF improvement of ternary OPVs should be ascribed to comprehensively optimal photon harvesting, exciton dissociation and charge transport in ternary active layers. The more efficient charge separation and transport process in ternary active layers can be confirmed by the magneto-photocurrent and impedance spectroscopy experimental results, respectively. This work provides new insight into constructing highly efficient ternary OPVs with well compatible Y6 and its derivative as acceptor.

High-Performance Ladder-Type Heteroheptacene-Based Nonfullerene Acceptors Enabled by Asymmetric Cores with Enhanced Noncovalent Intramolecular Interactions

Nonfullerene acceptors (MQ3, MQ5, MQ6) are synthesized using asymmetric and symmetric ladder-type heteroheptacene cores with selenophene heterocycles. Although MQ3 and MQ5 are constructed with the same number of selenophene heterocycles, the heteroheptacene core of MQ5 is end-capped with selenophene rings while that of MQ3 is flanked with thiophene rings. With the enhanced noncovalent interaction of O⋅⋅⋅Se compared to that of O⋅⋅⋅S, MQ5 shows a bathochromically shifted absorption band and greatly improved carrier transport, leading to a higher power conversion efficiency (PCE) of 15.64 % compared to MQ3, which shows a PCE of 13.51 %. Based on the asymmetric heteroheptacene core, MQ6 shows an improved carrier transport induced by the reduced π-π stacking distance, related with the increased dipole moment in comparison with the nonfullerene acceptors based on symmetric cores. MQ6 exhibits a PCE of 16.39 % with a V_OC of 0.88 V, a FF of 75.66 %, and a J_SC of 24.62 mA cm^-2 .

Copolymers based on trialkylsilylethynyl-phenyl substituted benzodithiophene building blocks for efficient organic solar cells

Trialkylsilylethynyl-phenyl was explored as a side chain to construct a benzodithiophene-containing polymer that demonstrated a PCE of 7.81% in organic solar cells.