Atomically dispersed Ir/α-MoC catalyst with high metal loading and thermal stability for water-promoted hydrogenation reaction

Metal-Sulfur Interfaces as the Primary Active Sites for Catalytic Hydrogenations

The determination of catalytically active sites is crucial for understanding the catalytic mechanism and providing guidelines for the design of more efficient catalysts. However, the complex structure of supported metal nanocatalysts (e.g., support, metal surface, and metal-support interface) still presents a big challenge. In particular, many studies have demonstrated that metal-support interfaces could also act as the primary active sites in catalytic reactions, which is well elucidated in oxide-supported metal nanocatalysts but is rarely reported in carbon-supported metal nanocatalysts. Here, we fill the above gap and demonstrate that metal-sulfur interfaces in sulfur-doped carbon-supported metal nanocatalysts are the primary active sites for several catalytic hydrogenation reactions. A series of metal nanocatalysts with similar sizes but different amounts of metal-sulfur interfaces were first constructed and characterized. Taking Ir for quinoline hydrogenation as an example, it was found that their catalytic activities were proportional to the amount of the Ir-S interface. Further experiments and density functional theory (DFT) calculations suggested that the adsorption and activation of quinoline occurred on the Ir atoms at the Ir-S interface. Similar phenomena were found in p-chloronitrobenzene hydrogenation over the Pt-S interface and benzoic acid hydrogenation over the Ru-S interface. All of these findings verify the predominant activity of metal-sulfur interfaces for catalytic hydrogenation reactions and contribute to the comprehensive understanding of metal-support interfaces in supported nanocatalysts.

Noble Metal Phosphides Supported on CoNi Metaphosphate for Efficient Overall Water Splitting

Transition metal metaphosphates and noble metal phosphides prepared under similar conditions are potential hybrid catalysts for electrocatalytic water splitting, which is of great significance for H2 production. Herein, the structure and electrocatalytic activity of different noble metal species (i.e., Rh, Pd, Ir) on CoNiP4O12 nanoarrays have been systematically studied. Due to the different formation energies of noble metal phosphides, the phosphides of Rh (RhPx) and Pd (PdPx) as well as the noble metal Ir are obtained under the same phosphorylation conditions perspectively. RhPx/CoNiP4O12 and PdPx/CoNiP4O12 exhibit much better HER activity than Ir/CoNiP4O12 due to the advantages of phosphides. Density functional theory (DFT) calculations reveal that the extraordinary activity of RhPx/CoNiP4O12 originated from the strong affinity to H2O and optimal adsorption for H*. The best RhPx/CoNiP4O12 only requires a low overpotential of 30 and 234 mV to deliver 10 mA cm-2 for HER and OER, respectively, and therefore is effective for overall water splitting (requiring 1.57 V to achieve a current density of 10 mA cm-2). This work not only develops a novel RhPx/CoNiP4O12 electrocatalyst for overall water splitting but also provides deep insight into the formation mechanism of noble metal phosphides.

Heterostructured Ultrathin Two-Dimensional Co-FeOOH Nanosheets@1D Ir-Co(OH)F Nanorods for Efficient Electrocatalytic Water Splitting

It is highly desirable to develop high-performance and robust electrocatalysts for overall water splitting, as the existing electrocatalysts exhibit poor catalytic performance toward hydrogen and oxygen evolution reactions (HER and OER) in the same electrolytes, resulting in high cost, low energy conversion efficiency, and complicated operating procedures. Herein, a heterostructured electrocatalyst is realized by growing Co-ZIF-67-derived 2D Co-doped FeOOH on 1D Ir-doped Co(OH)F nanorods, denoted as Co-FeOOH@Ir-Co(OH)F. The Ir-doping couples with the synergy between Co-FeOOH and Ir-Co(OH)F effectively modulate the electronic structures and induce defect-enriched interfaces. This bestows Co-FeOOH@Ir-Co(OH)F with abundant exposed active sites, accelerated reaction kinetics, improved charge transfer abilities, and optimized adsorption energies of reaction intermediates, which ultimately boost the bifunctional catalytic activity. Consequently, Co-FeOOH@Ir-Co(OH)F exhibits low overpotentials of 192/231/251 and 38/83/111 mV at current densities of 10/100/250 mA cm^-2 toward the OER and HER in a 1.0 M KOH electrolyte, respectively. When Co-FeOOH@Ir-Co(OH)F is used for overall water splitting, cell voltages of 1.48/1.60/1.67 V are required at current densities of 10/100/250 mA cm^-2. Furthermore, it possesses outstanding long-term stability for OER, HER, and overall water splitting. Our study provides a promising way to prepare advanced heterostructured bifunctional electrocatalysts for overall alkaline water splitting.

Evolution of Stabilized 1T-MoS2 by Atomic-Interface Engineering of 2H-MoS2 /Fe-Nx towards Enhanced Sodium Ion Storage

Metallic conductive 1T phase molybdenum sulfide (MoS₂ ) has been identified as promising anode for sodium ion (Na⁺ ) batteries, but its metastable feature makes it difficult to obtain and its restacking during the charge/discharge processing result in part capacity reversibility. Herein, a synergetic effect of atomic-interface engineering is employed for constructing 2H-MoS₂ layers assembled on single atomically dispersed Fe-N-C (SA Fe-N-C) anode material that boosts its reversible capacity. The work-function-driven-electron transfer occurs from SA Fe-N-C to 2H-MoS₂ via the Fe-S bonds, which enhances the adsorption of Na⁺ by 2H-MoS₂ , and lays the foundation for the sodiation process. A phase transfer from 2H to 1T/2H MoS₂ with the ferromagnetic spin-polarization of SA Fe-N-C occurs during the sodiation/desodiation process, which significantly enhances the Na⁺ storage kinetics, and thus the 1T/2H MoS₂ /SA Fe-N-C display a high electronic conductivity and a fast Na⁺ diffusion rate.

Surface oxidation protection strategy of CoS2 by V2O5 for electrocatalytic hydrogen evolution reaction

Transition metal sulfides (TMSs) are promising electrocatalysts for hydrogen evolution reaction (HER), while TMSs usually suffer from inevitable surface oxidation in air, and the impact of the surface oxidation on their HER catalytic activity remains unclear. Herein, we demonstrate an effective strategy for reducing the surface oxidation degree of easily oxidized CoS₂ by introducing glued vanadium pentoxide (V₂O₅) nanoclusters, taking advantage of the preferential adsorption and strong interaction between high-valence V and O₂. Combining oxidation protection and elaborate oxidation control experiments reveal that reduced surface oxidation degree of CoS₂ is conducive to affording promising HER catalytic performance, as the oxidized surface of CoS₂ can hinder the dissociation of water and thus is harmful to the HER process. Direct evidence is provided that surface oxidation should be carefully considered for TMS-based HER catalysts. The present work not only develops a new strategy for protecting CoS₂ from surface oxidation, but also provides deep insight into the impact of surface oxidation on the HER performance of transition metal compounds.

FePO4 supported Rh subnano clusters with dual active sites for efficient hydrogenation of quinoline under mild conditions

Chemoselective hydrogenation of quinoline and its derivatives under mild reaction conditions still remains a challenging topic, which requires a suitable interaction between reactants and a catalyst to achieve high performance and stability. Herein, FePO₄-supported Rh single atoms, subnano clusters and nanoparticle catalysts were synthesized and evaluated in the chemoselective hydrogenation of quinoline. The results show that the Rh subnano cluster catalyst with a size of ∼1 nm gives a specific reaction rate of 353 mol_quinoline mol_Rh^-1 h^-1 and a selectivity of >99% for 1,2,3,4-tetrahydroquinoline under mild conditions of 50 °C and 5 bar H₂, presenting better performance compared with the Rh single atoms and nanoparticle counterparts. Moreover, the Rh subnano cluster catalyst exhibits good stability and substrate universality for the hydrogenation of various functionalized quinolines. A series of characterization studies demonstrate that the acidic properties of the FePO₄ support favors the adsorption of quinoline while the Rh subnano clusters promote the dissociation of H₂ molecules, and then contribute to the enhanced hydrogenation performance. This work provides an important implication to design efficient Rh-based catalysts for chemoselective hydrogenation under mild conditions.

Mo2TiC2 MXene-Supported Ru Clusters for Efficient Photothermal Reverse Water-Gas Shift

Driving metal-cluster-catalyzed high-temperature chemical reactions by sunlight holds promise for the development of negative-carbon-footprint industrial catalysis, which has yet often been hindered by the poor ability of metal clusters to harvest and utilize the full spectrum of solar energy. Here, we report the preparation of Mo2TiC2 MXene-supported Ru clusters (Ru/Mo2TiC2) with pronounced broadband sunlight absorption ability and high sintering resistance. Under illumination of focused sunlight, Ru/Mo2TiC2 can catalyze the reverse water-gas shift (RWGS) reaction to produce carbon monoxide from the greenhouse gas carbon dioxide and renewable hydrogen with enhanced activity, selectivity, and stability compared to their nanoparticle counterparts. Notably, the CO production rate of MXene-supported Ru clusters reached 4.0 mol·gRu-1·h-1, which is among the best reported so far for photothermal RWGS catalysts. Detailed studies suggest that the production of methane is kinetically inhibited by the rapid desorption of CO from the surface of the Ru clusters.

Low-Temperature Acetylene Semi-Hydrogenation over the Pd1-Cu1 Dual-Atom Catalyst

The atomically dispersed metal catalyst or single-atom catalyst (SAC) with the utmost metal utilization efficiency shows excellent selectivity toward ethylene compared to the metal nanoparticles catalyst in the acetylene semi-hydrogenation reaction. However, these catalysts normally work at relatively high temperatures. Achieving low-temperature reactivity while preserving high selectivity remains a challenge. To improve the intrinsic reactivity of SACs, rationally tailoring the coordination environments of the first metal atom by coordinating it with a second neighboring metal atom affords an opportunity. Here, we report the fabrication of a dual-atom catalyst (DAC) that features a bonded Pd₁-Cu₁ atomic pair anchoring on nanodiamond graphene (ND@G). Compared to the single-atom Pd or Cu catalyst, it exhibits increased reactivity at a lower temperature, with 100% acetylene conversion and 92% ethylene selectivity at 110 °C. This work provides a strategy for designing DACs for low-temperature hydrogenation by manipulating the coordination environment of catalytic sites at the atomic level.

A general method for rapid synthesis of refractory carbides by low-pressure carbothermal shock reduction

Refractory carbides are attractive candidates for support materials in heterogeneous catalysis because of their high thermal, chemical, and mechanical stability. However, the industrial applications of refractory carbides, especially silicon carbide (SiC), are greatly hampered by their low surface area and harsh synthetic conditions, typically have a very limited surface area (<200 m² g^-1), and are prepared in a high-temperature environment (>1,400 °C) that lasts for several or even tens of hours. Based on Le Chatelier's principle, we theoretically proposed and experimentally verified that a low-pressure carbothermal reduction (CR) strategy was capable of synthesizing high-surface area SiC (569.9 m² g^-1) at a lower temperature and a faster rate (∼1,300 °C, 50 Pa, 30 s). Such high-surface area SiC possesses excellent thermal stability and antioxidant capacity since it maintained stability under a water-saturated airflow at 650 °C for 100 h. Furthermore, we demonstrated the feasibility of our strategy for scale-up production of high-surface area SiC (460.6 m² g^-1), with a yield larger than 12 g in one experiment, by virtue of an industrial viable vacuum sintering furnace. Importantly, our strategy is  also applicable to the rapid synthesis of refractory metal carbides (NbC, Mo₂C, TaC, WC) and even their emerging high-entropy carbides (VNbMoTaWC₅, TiVNbTaWC₅). Therefore, our low-pressure CR method provides an alternative strategy, not merely limited to temperature and time items, to regulate the synthesis and facilitate the upcoming industrial applications of carbide-based advanced functional materials.

CO-tolerant RuNi/TiO2 catalyst for the storage and purification of crude hydrogen

Hydrogen storage by means of catalytic hydrogenation of suitable organic substrates helps to elevate the volumetric density of hydrogen energy. In this regard, utilizing cheaper industrial crude hydrogen to fulfill the goal of hydrogen storage would show economic attraction. However, because CO impurities in crude hydrogen can easily deactivate metal active sites even in trace amounts such a process has not yet been realized. Here, we develop a robust RuNi/TiO₂ catalyst that enables the efficient hydrogenation of toluene to methyl-cyclohexane under simulated crude hydrogen feeds with 1000-5000 ppm CO impurity at around 180 °C under atmospheric pressure. We show that the co-localization of Ru and Ni species during reduction facilitated the formation of tightly coupled metallic Ru-Ni clusters. During the catalytic hydrogenation process, due to the distinct bonding properties, Ru and Ni served as the active sites for CO methanation and toluene hydrogenation respectively. Our work provides fresh insight into the effective utilization and purification of crude hydrogen for the future hydrogen economy.

Zn-Doped CoS2 Nanoarrays for an Efficient Oxygen Evolution Reaction: Understanding the Doping Effect for a Precatalyst

Development of low-cost, efficient, and durable electrocatalysts for the oxygen evolution reaction (OER) is crucial for multiple energy conversions and storage devices. Herein, Zn-doped CoS₂ nanoarrays supported on carbon cloth, Co(Zn)S₂/CC, are fabricated through a facile sulfidization of CoZn metal-organic frameworks. This precatalyst, Co(Zn)S₂/CC, with a well-defined nanoarray structure affords excellent OER catalytic activity (η = 248 mV at 10 mA/cm²) and long-term durability in 1 M KOH. X-ray photoelectron and in situ Raman spectroscopic studies indicate that Co(Zn)S₂ undergoes surface reconstruction with the generation of Co(Zn)OOH adsorbed with SO₄^2- at the surface during the OER process. The Zn dopant is calculated to impact on the electronic structure of Co species and further the adsorption of intermediates. This work not only provides a novel method for the synthesis of bimetallic sulfides but also gives insights into the doping effect on the OER performance of transition metal sulfides.

Crystalline Phase Induced Raman Enhancement on Molybdenum Carbide

Crystalline phase can greatly influence the Raman enhancement on semiconductor materials. Here, we demonstrate the crystalline phase induced Raman enhancement on molybdenum carbide materials (β-Mo2C and α-MoC). From all the...

α-MoC Supported Noble Metal Catalysts for Water-Gas Shift Reaction: Single-Atom Promoter or Single-Atom Player

In this work, we study the water-gas shift (WGS) reaction catalyzed by α-MoC(100) supported typical platinum group metal (PGM) single atoms (Rh₁, Pd₁, and Pt₁) and Au₁ via density functional theory calculations. The adsorption energies of key reaction intermediates and the kinetic barriers of the proposed rate-determining step in the WGS were systematically investigated. It is found that Rh₁, Pd₁, and Pt₁ can serve as single-atom promoters (SAPs) to improve the WGS performance of surface Mo atoms on α-MoC(100). The enhanced activity originates from the fact that SAP modifies the electronic structure of Mo active sites. Comparatively, the Au₁ species not only acts as an SAP but also directly participates in the catalysis as a single-atom player. The additional experiments with single-atom catalyst performance and kinetic studies confirm the theoretical calculation conclusions. This study can provide a basis to further develop efficient WGS catalysts by tuning the activity of the substrate with intercalation of SAPs.

Heterogeneous Catalysis in Water

Heterogeneous catalytic processes produce the majority of the fuels and chemicals in the chemical industry and have kept improving the welfare of human beings for centuries. Although most of the heterogeneous catalytic reactions occur at the gas-solid interface, numerous cases have demonstrated that the condensed water near the active site and/or the aqueous phase merging the catalysts play positive roles in enhancing the performance of heterogeneous catalysts and creating novel catalytic conversion routes. We enumerate the traditional heterogeneous catalytic reactions that enable significant rate/selectivity promotion in the aqueous phase or adsorbed micro water environment and discuss the role of water in specific systems. Some of the novel heterogeneous reactions achieved with only the assistance of the aqueous phase have been summarized. The development of reactions with the participation of the aqueous phase/water and the investigation of the role of water in the heterogeneous catalytic reactions will open new horizons for catalysts with better activity, improved selectivity, and novel processes.

Ultradispersed Ir x Ni clusters as bifunctional electrocatalysts for high-efficiency water splitting in acid electrolytes

Design and synthesis of electrocatalysts with high activity and low cost is an important challenge for water splitting. We report a rapid and facile synthetic route to obtain Ir_xNi clusters via polyol reduction. The Ir_xNi clusters show excellent activity for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in acidic electrolytes. The optimized Ir₂Ni/C clusters exhibit an electrochemical active area of 18.27 mF cm⁻², with the overpotential of OER being 292 mV and HER being 30 mV at 10 mA cm⁻², respectively. In addition, the Ir₂Ni/C used as the cathode and anode for the H-type hydrolysis tank only needs 1.597 V cell voltages. The excellent electrocatalytic performance is mainly attributed to the synergistic effect between the metals and the ultra-fine particle size. This study provides a novel strategy that has a broad application for water splitting.

A method of preparing Ir_xNi/C clusters by polyol reduction using a XC-72R support was proposed. Due to the 2 nm size of the catalyst particles, more active sites are exposed. This is a promising route for the development of efficient water splitting electrocatalysts.

Regulating coordination number in atomically dispersed Pt species on defect-rich graphene for n-butane dehydrogenation reaction

Metal nanoparticle (NP), cluster and isolated metal atom (or single atom, SA) exhibit different catalytic performance in heterogeneous catalysis originating from their distinct nanostructures. To maximize atom efficiency and boost activity for catalysis, the construction of structure-performance relationship provides an effective way at the atomic level. Here, we successfully fabricate fully exposed Pt3 clusters on the defective nanodiamond@graphene (ND@G) by the assistance of atomically dispersed Sn promoters, and correlated the n-butane direct dehydrogenation (DDH) activity with the average coordination number (CN) of Pt-Pt bond in Pt NP, Pt3 cluster and Pt SA for fundamentally understanding structure (especially the sub-nano structure) effects on n-butane DDH reaction at the atomic level. The as-prepared fully exposed Pt3 cluster catalyst shows higher conversion (35.4%) and remarkable alkene selectivity (99.0%) for n-butane direct DDH reaction at 450 °C, compared to typical Pt NP and Pt SA catalysts supported on ND@G. Density functional theory calculation (DFT) reveal that the fully exposed Pt3 clusters possess favorable dehydrogenation activation barrier of n-butane and reasonable desorption barrier of butene in the DDH reaction.

Structural Evolution and Underlying Mechanism of Single-Atom Centers on Mo2C(100) Support during Oxygen Reduction Reaction

The single-metal atoms coordinating with the surface atoms of the support constitute the active centers of as-prepared single-atom catalysts (SACs). However, under hash electrochemical conditions, (1) supports' surfaces may experience structural change, which turn to be distinct from those at ambient conditions; (2) during catalysis, the dynamic responses of a single atom to the attack of reaction intermediates likely change the coordination environment of a single atom. These factors could alter the performance of SACs. Herein, we investigate these issues using Mo₂C(100)-supported single transition-metal (TM) atoms as model SACs toward catalyzing the oxygen reduction reaction (ORR). It is found that the Mo₂C(100) surface is oxidized under ORR turnover conditions, resulting in significantly weakened bonding between single TM atoms and the Mo₂C(100) surface (TM@Mo₂C(100)_O* term for SAC). While the intermediate in 2 e^- ORR does not change the local structures of the active centers in these SACs, the O* intermediate emerging in 4 e^- ORR can damage Rh@ and Cu@Mo₂C(100)_O*. Furthermore, on the basis of these findings, we propose Pt@Mo₂C(100)_O* as a qualified ORR catalyst, which exhibits extraordinary 4 e^- ORR activity with an overpotential of only 0.33 V, surpassing the state-of-the-art Pt(111), and thus being identified as a promising alternative to the commercial Pt/C catalyst.