Oriented Metal Stripping for Highly Reversible Zinc Anode

Aqueous zinc metal batteries are a viable candidate for next-generation energy storage systems, but suffer from poor cycling efficiency of the Zn anode. Emerging approaches aim to regulate zinc plating behavior to suppress uncontrolled dendrites, while the stripping process is seldom considered. Herein, an oriented metal stripping strategy is demonstrated to stabilize the Zn anode by removing high-index facets for exposing the (002) plane through the addition of anionic additive sodium citrate (SC). Consequently, high-index facets that coordinate strongly with SC are preferentially stripped out due to a reduced stripping barrier, rendering stable (002) facet preponderant in epitaxial plating. After repeat stripping/plating, the ultra-high proportion of 93% for (002) and large-size grains of ≈100 µm (six times larger than before) can be obtained. Zn anode shows continuous 25 000 cycles with low overpotential at 100 mA cm-2 in symmetric cells and more than 70 h of stable operation even at an ultra-high depth of discharge of 92.3%. Moreover, an extremely long lifespan of 12 000 cycles at 10 A g-1 with a high capacity retention of 89% is achieved by the assembled Zn//I2 battery. This work provides a distinctive approach to improving the stripping process to design highly efficient zinc anodes for promising aqueous zinc metal batteries.

Three-Dimensional Au Octahedral Nanoheptamers: Single-Particle and Bulk Near-Field Focusing for Surface-Enhanced Raman Scattering

Herein, we present a synthetic approach to fabricate Au nanoheptamers composed of six individual Au nanospheres interconnected through thin metal bridges arranged in an octahedral configuration. The resulting structures envelop central Au nanospheres, producing Au nanosphere heptamers with an open architectural arrangement. Importantly, the initial Pt coating of the Au nanospheres is a crucial step for protecting the inner Au nanospheres during multiple reactions. As-synthesized Au nanoheptamers exhibit multiple hot spots formed by nanogaps between nanospheres, resulting in strong electromagnetic near-fields. Additionally, we conducted surface-enhanced Raman-scattering-based detection of a chemical warfare agent simulant in the gas phase and achieved a limit of detection of 100 ppb, which is 3 orders lower than that achieved using Au nanospheres and Au nanohexamers. This pseudocore-shell nanostructure represents a significant advancement in the realm of complex nanoparticle synthesis, moving the field one step closer to sophisticated nanoparticle engineering.

Strain and Surface Engineering of Multicomponent Metallic Nanomaterials with Unconventional Phases

Multicomponent metallic nanomaterials with unconventional phases show great prospects in electrochemical energy storage and conversion, owing to unique crystal structures and abundant structural effects. In this review, we emphasize the progress in the strain and surface engineering of these novel nanomaterials. We start with a brief introduction of the structural configurations of these materials, based on the interaction types between the components. Next, the fundamentals of strain, strain effect in relevant metallic nanomaterials with unconventional phases, and their formation mechanisms are discussed. Then the progress in surface engineering of these multicomponent metallic nanomaterials is demonstrated from the aspects of morphology control, crystallinity control, surface modification, and surface reconstruction. Moreover, the applications of the strain- and surface-engineered unconventional nanomaterials mainly in electrocatalysis are also introduced, where in addition to the catalytic performance, the structure-performance correlations are highlighted. Finally, the challenges and opportunities in this promising field are prospected.

Surface engineering of colloidal nanoparticles

Synthesis of engineered colloidal nanoparticles (NPs) with delicate surface characteristics leads to well-defined physicochemical properties and contributes to multifunctional applications. Surface engineering of colloidal NPs can improve their stability in diverse solvents by inhibiting the interparticle attractive forces, thus providing a prerequisite for further particle manipulation, fabrication of the following materials and biological applications. During the last decades, surface engineering methods for colloidal NPs have been well-developed by numerous researchers. However, accurate control of surface properties is still an important topic. The emerging DNA/protein nanotechnology offers additional possibility of surface modification of NPs and programmable particle self-assembly. Here, we first briefly review the recent progress in surface engineering of colloidal NPs, focusing on the improved stability by grafting suitable small molecules, polymers or biological macromolecules. We then present the practical strategies for nucleic acid surface encoding of NPs and subsequent programmable assembly. Various exciting applications of these unique materials are summarized with a specific focus on the cellular uptake, bio-toxicity, imaging and diagnosis of colloidal NPs in vivo. With the growing interest in colloidal NPs in nano-biological research, we expect that this review can play an instructive role in engineering the surface properties for desired applications.

Synthesis of Pt Double-Walled Nanoframes with Well-Defined and Controllable Facets

In this paper, we demonstrate the synthesis of morphologically complex nanoframes wherein a mixture of frames and thin solid planes, which we refer to as walled-nanoframes, are present in a single particle. By applying multiple chemical steps including shape evolution of Au nanocrystals and controlling chemical potential of solution for selective deposition, we successfully designed a variety of Pt nanoframes including Pt cuboctahedral nanoframes and Pt single-walled nanoframes. The rationale for on-demand chemical steps with well-faceted Au overgrowth allowed for the synthesis of double-walled nanoframes where two Pt single-walled nanoframes are concentrically overlapped in a single entity with a clearly discernible gap between the two nanoframes. Given the coexistence of an open structure of nanoframe and thin plates within one entity, the double-walled nanoframes showed a dramatic increase in catalytic activity toward the methanol oxidation reaction, acting as high-surface area, carbon-free, and volume-compact nanocatalysts.

All-Hot-Spot Bulk Surface-Enhanced Raman Scattering (SERS) Substrates: Attomolar Detection of Adsorbates with Designer Plasmonic Nanoparticles

Here we report a synthetic pathway toward Au truncated octahedral dual-rim nanoframes wherein two functional facets are formed including (1) eight hot nanogaps formed by hexagonal nanoframes embracing core circular nanorings for near-field focusing and (2) six flat squares that facilitate the formation of well-ordered arrays of nanoframes through self-assembly. The existence of intra-nanogaps in a single entity enables strong electromagnetic near-field focusing, allowing single-particle surface-enhanced Raman spectroscopy. Then, we built "all-hot-spot bulk SERS substrates" with those entities, wherein the presence of truncated terraces with high homogeneity in size and shape facilitate spontaneous self-assembly into a highly ordered and uniform superlattice, exhibiting a limit of detection of attomolar concentrations toward 2-naphthalenethiol, which is 6 orders lower than that of monorim counterparts. The observed low limit of detection originates from the combined synergic effect from both inter- and intraparticle coupling in a superlattice, which we dubbed "all-hot-spot bulk SERS substrates".

N-heterocyclic carbene-stabilized metal nanoparticles within porous organic cages for catalytic application

Tuning the surface-embellishing ligands of metal nanoparticles (NPs) is a powerful strategy to modulate their morphology and surface electronic and functional features, impacting their catalytic activity and selectivity. In this work, we report the design and synthesis of a polytriazolium organic cage PIC-T, capable of stabilizing PdNPs within its discrete cavity. The obtained material (denoted Pd@PCC-T) is highly durable and monodispersed with narrow particle-size distribution of 2.06 ± 0.02 nm, exhibiting excellent catalytic performance and recyclability in the Sonogashira coupling and tandem reaction to synthesize benzofuran derivatives. Further investigation indicates that the modulation of N-heterocyclic carbene sites embedded in the organic cage has an impact on NPs' catalytic efficiency, thus providing a novel methodology to design superior NP catalysts.

Ni2+ -Directed Anisotropic Growth of PtCu Nested Skeleton Cubes Boosting Electroreduction of Oxygen

Structure-controlled Pt-based nanocrystals have the great potential to provide a flexible strategy for improving the catalysis of the oxygen reduction reaction (ORR). Here, a new synthetic approach is developed to tune the 3D structure of Pt-based alloys, and switch a synthetic reaction which produces solid PtCu octahedral stars (OSs) to produce PtCu nested skeleton cubes (NSCs) by simple addition of Ni(acac)₂ . In particular, Ni²⁺ -guided anisotropic growth is observed to generate the nested skeleton structure in PtCu NSCs. Ni²⁺ , though absent from the nanoalloys, not only endows faster Cu reduction kinetics but also acts as a structure-directing agent. Moreover, it is shown that acetic acid treatment of PtCu NSCs/C exposes Pt-rich surface with a fine-tuned Pt d-band center energy and the reduced Cu leaching, resulting in strikingly high activity and stability. Acid-treated PtCu NSCs/C shows a remarkable ORR mass activity of 5.13 A mg_Pt ^-1 , about 26 times higher than commercial Pt/C catalyst. This catalyst also exhibits excellent stability with a lower activity decay of 11.5% and the negligible variation in structure after 10 000 cycles.

Heterogeneous Trimetallic Nanoparticles as Catalysts

The development and application of trimetallic nanoparticles continues to accelerate rapidly as a result of advances in materials design, synthetic control, and reaction characterization. Following the technological successes of multicomponent materials in automotive exhausts and photovoltaics, synergistic effects are now accessible through the careful preparation of multielement particles, presenting exciting opportunities in the field of catalysis. In this review, we explore the methods currently used in the design, synthesis, analysis, and application of trimetallic nanoparticles across both the experimental and computational realms and provide a critical perspective on the emergent field of trimetallic nanocatalysts. Trimetallic nanoparticles are typically supported on high-surface-area metal oxides for catalytic applications, synthesized via preparative conditions that are comparable to those applied for mono- and bimetallic nanoparticles. However, controlled elemental segregation and subsequent characterization remain challenging because of the heterogeneous nature of the systems. The multielement composition exhibits beneficial synergy for important oxidation, dehydrogenation, and hydrogenation reactions; in some cases, this is realized through higher selectivity, while activity improvements are also observed. However, challenges related to identifying and harnessing influential characteristics for maximum productivity remain. Computation provides support for the experimental endeavors, for example in electrocatalysis, and a clear need is identified for the marriage of simulation, with respect to both combinatorial element screening and optimal reaction design, to experiment in order to maximize productivity from this nascent field. Clear challenges remain with respect to identifying, making, and applying trimetallic catalysts efficiently, but the foundations are now visible, and the outlook is strong for this exciting chemical field.

Enhanced oxygen reduction activity of size-selected platinum subnanocluster catalysts: Ptn (n = 3–9)

Ptn subnanoclusters (n = 3–9) on a carbon substrate exhibit 1.6–2.2 times higher activity than the standard Pt/C catalysts. EXAFS experiments and DFT calculations show plausible structures and energetics for reaction intermediates in the processes.

NIR II Light-Response Au Nanoframes: Amplification of a Pressure- and Temperature-Sensing Strategy for Portable Detection and Photothermal Therapy of Cancer Cells

Quantitative detection of cancer cells using portable devices is promising for the development of simple, fast, and point-of-care cancer diagnostic techniques. However, how to further amplify the detection signal to improve the sensitivity and accuracy of detecting cancer cells by portable devices remains a challenge. To solve the problem, we, for the first time, synthesized folic-acid-conjugated Au nanoframes (FA-Au NFs) with amplification of pressure and temperature signals for highly sensitive and accurate detection of cancer cells by portable pressure meters and thermometers. The resulting Au NFs exhibit excellent near-infrared (NIR) photothermal performance and catalase activity, which can promote the decomposition of NH₄HCO₃ and H₂O₂ to generate corresponding gases (CO₂, NH₃, and O₂), thereby synergistically amplifying pressure signals in a closed reaction vessel. At the same time, Au NFs with excellent peroxidase-like activity can catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) to produce TMB oxide (oxTMB) with a strong photothermal effect, thereby cooperating with Au NFs to amplify the photothermal signal. In the presence of cancer cells with overexpressing folate receptors (FRs), the molecular recognition signals between FA and FR can be converted into amplified pressure and temperature signals, which can be easily read by portable pressure meters and thermometers, respectively. The detection limits for cancer cells using pressure meters and thermometers are 6 and 5 cells/mL, respectively, which are better than other reported methods. Moreover, such Au NFs can improve tumor hypoxia by catalyzing the decomposition of H₂O₂ to produce O₂ and perform photothermal therapy of cancer. Together, our work provides new insight into the application of Au NFs to develop a dual-signal sensing platform with amplification of pressure and temperature signals for portable and ultrasensitive detection of cancer cells as well as personalized cancer therapy.

A ruthenium nanoframe/enzyme composite system as a self-activating cascade agent for the treatment of bacterial infections

The cascade catalytic strategy could effectively enhance the antibacterial activity by regulating the production of hydroxyl radicals (˙OH) in the sites of bacterial infection. In this work, a ruthenium metal nanoframe (Ru NF) was successfully synthesized via the palladium template method. The cascade catalysis in the bacterial infection microenvironment was achieved by physically adsorbed natural glucose oxidase (GOx), and hyaluronic acid (HA) was coated on the outer layer of the system for locating the infection sites accurately. Eventually, a composite nano-catalyst (HA-Ru NFs/GOx) based on the ruthenium nanoframe was constructed, which exhibited excellent cascade catalytic activity and good biocompatibility. The prepared HA-Ru NFs/GOx enhances the antibacterial activity and inhibits bacterial regeneration through the outbreak of reactive oxygen species (ROS) caused by self-activating cascade reactions. In addition, in vivo experiments indicate that HA-Ru NFs/GOx could efficiently cause bacterial death and significantly promote wound healing/skin regeneration. Accordingly, ruthenium metal framework nanozymes could be used as an effective cascade catalytic platform to inhibit bacterial regeneration and promote wound healing, and have great potential as new antibacterial agents against antibiotic-resistant bacteria.

The facile synthesis of core-shell PtCu nanoparticles with superior electrocatalytic activity and stability in the hydrogen evolution reaction

Pt is the most efficient electrocatalyst for the hydrogen evolution reaction (HER); however, it is a high cost material with scarce resources. In order to balance performance and cost in a Pt-based electrocatalyst, we prepared a series of PtCu bimetallic nanoparticles (NPs) with different Pt/Cu ratios through a facile synthetic strategy to optimize the utilization of Pt atoms. PtCu NPs demonstrate a uniform particle size distribution with exposed (111) facets that are highly active for the HER. A synergetic effect between Pt and Cu leads to electron transfer from Pt to Cu, which is favorable for the desorption of H intermediates. Therefore, the as-synthesized carbon black (CB) supported PtCu catalysts showed enhanced catalytic performance in the HER compared with a commercial Pt/C electrocatalyst. Typically, Pt₁Cu₃/CB showed excellent HER performance, with only 10 mV (acid) and 17 mV (alkaline) overpotentials required to achieve a current density of 10 mA cm^-2. This is because the Pt₁Cu₃ NPs, with a small average particle size (7.70 ± 0.04 nm) and Pt-Cu core and Pt-rich shell structure, display the highest electrochemically active surface area (24.7 m² g_Pt ^-1) out of the as-synthesized PtCu/CB samples. Furthermore, Pt₁Cu₃/CB showed good electrocatalytic stability, with current density drops of only 9.3% and 12.8% in acidic solution after 24 h and in alkaline solution after 9 h, respectively. This study may shed new light on the rational design of active and durable hydrogen evolution catalysts with low amounts of Pt.

The use of amino-based functional molecules for the controllable synthesis of noble-metal nanocrystals: a minireview

Controlling the morphologies and structures of noble-metal nanocrystals has always been a frontier field in electrocatalysis. Functional molecules such as capping agents, surfactants and additives are indispensable in shape-control synthesis. Amino-based functional molecules have strong coordination abilities with metal ions, and they are widely used in the morphology control of nanocrystals. In this minireview, we pay close attention to recent advances in the use of amino-based functional molecules for the controllable synthesis of noble-metal nanocrystals. The effects of various amino-based molecules on differently shaped noble-metal nanocrystals, including zero-, one-, two-, and three-dimensional nanocrystals, are reviewed and summarized. The roles and mechanisms of amino-based small molecules and long-chain ammonium salts relating to the morphology-control synthesis of noble-metal nanocrystals are highlighted. Relationships between shape and electrocatalytic properties are also described. Finally, some key prospects and challenges relating to the controllable synthesis of noble-metal nanocrystals and their electrocatalytic applications are proposed.

A Robust PtNi Nanoframe/N-Doped Graphene Aerogel Electrocatalyst with Both High Activity and Stability

Insufficient catalytic activity and stability and high cost are the barriers for Pt-based electrocatalysts in wide practical applications. Herein, a hierarchically porous PtNi nanoframe/N-doped graphene aerogel (PtNiNF-NGA) electrocatalyst with outstanding performance toward methanol oxidation reaction (MOR) in acid electrolyte has been developed via facile tert-butanol-assisted structure reconfiguration. The ensemble of high-alloying-degree-modulated electronic structure and correspondingly the optimum MOR reaction pathway, the structure superiorities of hierarchical porosity, thin edges, Pt-rich corners, and the anchoring effect of the NGA, endow the PtNiNF-NGA with both prominent electrocatalytic activity and stability. The mass and specific activity (1647 mA mg_Pt ^-1 , 3.8 mA cm^-2 ) of the PtNiNF-NGA are 5.8 and 7.8 times higher than those of commercial Pt/C. It exhibits exceptional stability under a 5-hour chronoamperometry test and 2200-cycle cyclic voltammetry scanning.

Strain-Stabilized Metastable Face-Centered Tetragonal Gold Overlayer for Efficient CO2 Electroreduction

Synthesis of the unconventional phase of noble metal nanocrystals may create new opportunities in exploring intriguing physicochemical properties but remains challenging. In the research field of thin film growth, the interface strain offers a general driving force to stabilize the metastable phase of epitaxial film. Herein we extend this concept to the field of noble metal nanocrystals and report the solution synthesis of metastable face-centered tetragonal Au that has not been discovered before. The successful synthesis relies on the formation of intermetallic AuCu₃@Au core-shell structure, where the interface strain stabilizes the metastable fct Au overlayer. Compared with the face-centered cubic Au counterpart, the metastable fct Au shows greatly improved catalytic activity toward CO₂ reduction to CO. The density functional theory calculations and spectroscopic studies reveal that the metastable fct Au upshifts the d-band center, which lowers the energy barrier of key intermediate COOH* formation and thus facilitates the reaction kinetics.

Gold nanobipyramid-embedded silver-platinum hollow nanostructures for monitoring stepwise reduction and oxidation reactions

Metal hollow nanostructures based on gold nanobipyramids (Au NBPs) are of great interest for the combination of tunable plasmonic resonances and excellent physicochemical properties. Based on the core-shell Au NBP@Ag nanorods with desired sizes, herein we reported the synthesis and growth mechanism of Au NBP-embedded AgPt hollow nanostructures with tunable thickness and size. The Au NBP@AgPt nanoframes were obtained at lower temperature, in which cetyltrimethylammonium bromine (CTAB) was applied as a capping agent to guide the deposition of Pt atoms on the edges and corners of Au NBPs@Ag nanorods. With the increase of reaction temperature, the Au NBP@AgPt nanoframes convert into nanocages due to the atomic migration to the surfaces. The surface plasmon resonance of the Au NBP@AgPt hollow nanostructure shifts from red to blue, which is ascribed to the changes in coverage area and location site of the AgPt alloy. When CTAB was replaced by cetyltrimethylammonium chloride (CTAC), Au NBP@AgPt nanocages dominate the product. The surface roughness and thickness of the nanocages can be controlled by the temperature and the amount of Pt precursor. Moreover, Au NBP@AgPt hollow nanostructures show excellent surface-enhanced Raman scattering and exhibit remarkable stability in harsh environments. Taking into account the advantages of the plasmonic property (Au NBPs), catalytic activity (Pt) and plasmon-enhanced signal (Ag), the Au NBP@AgPt hollow nanostructures are a promising candidate for technological applications in catalytic reactions.

Gold nanobipyramid-embedded ultrathin metal nanoframes for in situ monitoring catalytic reactions

Metal nanoframes, especially ultrathin ones, with excellent plasmonic properties are synthetically interesting and highly attractive. Herein we report on the synthesis of Au nanobipyramid-embedded ultrathin metal nanoframes with one of the plasmon modes very similar to that of the Au nanobipyramids. The synthesis is mediated by silver coating on Au nanobipyramids. The excellent plasmonic properties of the Au nanobipyramid-embedded ultrathin metal nanoframes are ascribed to the little influence of the ultrathin metal nanoframes on the Au nanobipyramids, as verified by electrodynamic simulations. The increase in the amount of the added metal atoms changes the nanostructure from the nanoframe to a nanocage shape. The method has also been successfully applied to (Au nanobipyramid)@Ag nanorods with different lengths and Au nanobipyramids with different longitudinal dipolar plasmon wavelengths, suggesting the generality of our approach. We have further shown that the Au nanobipyramid-embedded ultrathin metal nanoframes possess an excellent surface-enhanced Raman scattering and outstanding in situ reaction probing performance. Our study opens up a route for the construction of plasmonic ultrathin metal nanoframes based on Au nanobipyramids for plasmon-enabled applications.

Realization of red plasmon shifts by the selective etching of Ag nanorods

The red plasmon shifts is realized through selective deposition of Au atoms and etching of Ag atoms on the Ag nanorods.

Enhanced oxygen reduction activity of platinum subnanocluster catalysts through charge redistribution

Single-size platinum Pt6 subnanoclusters exhibit superior mass-specific and surface-specific activities for the oxygen reduction reaction. The enhanced activity is attributed to polarized electron distributions based on rigorous structure characterization by X-ray absorption fine structure spectroscopy and density functional theory.

Hollow Structures Based on Prussian Blue and Its Analogs for Electrochemical Energy Storage and Conversion

Due to their special structural characteristics, hollow structures grant fascinating physicochemical properties and widespread applications, especially in electrochemical energy storage and conversion. Recently, the research of Prussian blue (PB) and its analog (PBA) related nanomaterials has emerged and has drawn considerable attention because of their low cost, facile preparation, intrinsic open framework, and tunable composition. Here, the recent progress in the study of PB- and PBA-based hollow structures for electrochemical energy storage and conversion are summarized and discussed. First, some remarkable examples in the synthesis of hollow structures from PB- and PBA-based materials are illustrated in terms of the structural architectures, i.e., closed single-shelled hollow structures, open hollow structures, and complex hollow structures. Thereafter, their applications as potential electrode materials for lithium-/sodium-ion batteries, hybrid supercapacitors, and electrocatalysis are demonstrated. Finally, the current achievements in this field together with the limits and urgent challenges are summarized. Some perspectives on the potential solutions and possible future trends are also provided.

Ruthenium Nanoframes in the Face-Centered Cubic Phase: Facile Synthesis and Their Enhanced Catalytic Performance

Owing to their highly open structure and a large number of low-coordination sites on the surface, noble-metal nanoframes are intriguing for catalytic applications. Here, we demonstrate the rational synthesis of Ru cuboctahedral nanoframes with enhanced catalytic performance toward hydrazine decomposition. The synthesis starts from Pd nanocubes, which quickly undergo truncation at the corners as a consequence of oxidative etching caused by Br^- ions. Afterward, the galvanic replacement reaction between Pd and Ru(III) ions dominates, leading to the selective deposition of Ru atoms on the corners and edges and thereby the fabrication of Pd@Ru core-frame cuboctahedra. Significantly, the deposited Ru atoms are crystallized in a face-centered cubic (fcc) phase instead of the hexagonal close-packed (hcp) structure typical of bulk Ru. Upon the removal of Pd remaining in the core via chemical etching, we obtain Ru cuboctahedral nanoframes. By varying the amount of the Ru(III) precursor, the ridge thickness of the nanoframes can be tuned from a few atomic layers up to 10. Both the frame structure and fcc crystal phase of the Ru cuboctahedral nanoframes can be well preserved up to 300 °C. When compared with hcp-Ru nanoparticles, the fcc-Ru nanoframes displayed substantial enhancement in terms of H₂ selectivity toward hydrazine decomposition. This work offers the opportunity to engineer both the morphology and crystal phase of Ru nanocrystals for catalytic applications.

RNA-mediated, green synthesis of palladium nanodendrites for catalytic reduction of nitroarenes

Palladium (Pd)-catalyzed reactions mostly show structure sensitivity: i.e., the selectivity and activity of the reactions are highly dependent on the arrangement of Pd atoms. In this regard, branched Pd nanoparticles show enhanced catalytic performance owing to the presence of low coordinated Pd atoms. In this paper, a novel solution-phase synthesis of flower-like Pd nanodendrites using ribonucleic acid (RNA) as a capping agent and ascorbic acid as a reducing agent was described. On the other hand, the co-use of polyvinylpyrrolidone (PVP) and potassium bromide (KBr) instead of RNA at the same synthesis conditions led to cuboid nanoparticles, while the sole use of ascorbic acid resulted in faceted nanoparticles. The formation of nanodendritic morphology was attributed to the RNA-assisted growth through particle attachment. This scenario was supported by TEM analysis that demonstrated the aggregation of small particles to form larger nanoparticles at the onset of the reaction. The shape and size of the nanoparticles could be readily tuned by the RNA content used. XPS confirmed the formation of metallic Pd nanoparticles. The presence of crystalline planes of {1 1 1}, {2 0 0}, {2 2 0}, {3 1 1} and {2 2 2} was demonstrated by XRD and SAED analyses. The Pd nanodendrites were used for the reduction of p-nitrophenol (PNP) and 2,4,6-trinitrotoluene (TNT), and reduction rate constants (k) were calculated as 1.078 min^-1 (normalized rate constant, k_nor = 59.66 mmol^-1 s^-1) for PNP and 0.3181 min^-1 (k_nor = 17.6 mmol^-1 s^-1) for TNT with the corresponding turnover frequencies (TOFs) as 16.06 and 40.80 h^-1, respectively.

Structural Sensitivities in Bimetallic Catalysts for Electrochemical CO2 Reduction Revealed by Ag-Cu Nanodimers

Understanding the structural and compositional sensitivities of the electrochemical CO₂ reduction reaction (CO₂RR) is fundamentally important for developing highly efficient and selective electrocatalysts. Here, we use Ag/Cu nanocrystals to uncover the key role played by the Ag/Cu interface in promoting CO₂RR. Nanodimers including the two constituent metals as segregated domains sharing a tunable interface are obtained by developing a seeded growth synthesis, wherein preformed Ag nanoparticles are used as nucleation seeds for the Cu domain. We find that the type of metal precursor and the strength of the reducing agent play a key role in achieving the desired chemical and structural control. We show that tandem catalysis and electronic effects, both enabled by the addition of Ag to Cu in the form of segregated nanodomain within the same catalyst, synergistically account for an enhancement in the Faradaic efficiency for C₂H₄ by 3.4-fold and in the partial current density for CO₂ reduction by 2-fold compared with the pure Cu counterpart. The insights gained from this work may be beneficial for designing efficient multicomponent catalysts for electrochemical CO₂ reduction.

Hollow Metal Nanocrystals with Ultrathin, Porous Walls and Well-Controlled Surface Structures

Recent developments of a novel class of catalytic materials built on hollow nanocrystals having ultrathin, porous walls, and well-controlled surface structures are discussed, with a focus on platinum and the oxygen reduction reaction (ORR). An introduction is given to the critical role of platinum in the proton exchange membrane fuel cells, and the pressing need to develop a strategy for achieving cost-effective and sustainable use of this precious metal. How to maximize the mass activity of ORR catalysts based on platinum by rationally engineering the surface structure while increasing the utilization efficiency of atoms is then discussed. After reporting on the synthetic methods involving galvanic replacement and seed-mediated growth followed by etching, respectively, a number of examples to demonstrate the enhancement in activity and durability for this new class of catalytic materials are showcased. The feasibility to have the methodology extended from platinum to other precious metals such as gold and ruthenium is highlighted. In conclusion, some of the remaining issues and emerging solutions are examined.

Arrays of highly complex noble metal nanostructures using nanoimprint lithography in combination with liquid-phase epitaxy

Current best-practice lithographic techniques are unable to meet the functional requirements needed to enable on-chip plasmonic devices capable of fully exploiting nanostructure properties reliant on a tailored nanostructure size, composition, architecture, crystallinity, and placement. As a consequence, numerous nanofabrication methods have emerged that address various weaknesses, but none have, as of yet, demonstrated a large-area processing route capable of defining organized surfaces of nanostructures with the architectural diversity and complexity that is routinely displayed in colloidal syntheses. Here, a hybrid fabrication strategy is demonstrated in which nanoimprint lithography is combined with templated dewetting and liquid-phase syntheses that is able to realize periodic arrays of complex noble metal nanostructures over square centimeter areas. The process is inexpensive, can be carried out on a benchtop, and requires modest levels of instrumentation. Demonstrated are three fabrication schemes yielding arrays of core-shell, core-void-shell, and core-void-nanoframe structures using liquid-phase syntheses involving heteroepitaxial deposition, galvanic replacement, and dealloying. With the field of nanotechnology being increasingly reliant on the engineering of desirable physicochemical responses through architectural control, the fabrication strategy provides a platform for advancing devices reliant on addressable arrays or the collective response from an ensemble of identical nanostructures.

Recent advances in the precise control of isolated single-site catalysts by chemical methods

The search for constructing high-performance catalysts is an unfailing topic in chemical fields. Recently, we have witnessed many breakthroughs in the synthesis of single-atom catalysts (SACs) and their applications in catalytic systems. They have shown excellent activity, selectivity, stability, efficient atom utilization and can serve as an efficient bridge between homogeneous and heterogenous catalysis. Currently, most SACs are synthesized via a bottom-up strategy; however, drawbacks such as the difficulty in accessing high mass activity and controlling homogeneous coordination environments are inevitably encountered, restricting their potential use in the industrial area. In this regard, a novel top-down strategy has been recently developed to fabricate SACs to address these practical issues. The metal loading can be increased to 5% and the coordination environments can also be precisely controlled. This review highlights approaches to the chemical synthesis of SACs towards diverse chemical reactions, especially the recent advances in improving the mass activity and well-defined local structures of SACs. Also, challenges and opportunities for the SACs will be discussed in the later part.

Electrochemical Exfoliation of Pillared-Layer Metal-Organic Framework to Boost the Oxygen Evolution Reaction

Two-dimensional (2D) materials and ultrathin nanosheets are advantageous for elevating the catalysis performance and elucidating the catalysis mechanism of heterogeneous catalysts, but they are mostly restricted to inorganic or organic materials based on covalent bonds. We report an electrochemical/chemical exfoliation strategy for synthesizing metal-organic 2D materials based on coordination bonds. A catechol functionalized ligand is used as the redox active pillar to construct a pillared-layer framework. When the 3D pillared-layer MOF serves as an electrocatalyst for water oxidation (pH 13), the pillar ligands can be oxidized in situ and removed. The remaining ultrathin (2 nm) nanosheets of the metal-organic layers are an efficient catalyst with overpotentials as low as 211 mV at 10 mA cm^-2 and a turnover frequency as high as 30 s^-1 at an overpotential of 300 mV.

Porous Pt3Ni with enhanced activity and durability towards oxygen reduction reaction

The size of nanocrystals (NCs) is regarded as one of the vital factors determining their electrochemical performance. To achieve high electrochemical activity and durability at the same time still remains a big challenge. This work has demonstrated the successful synthesis of Pt₃Ni nanocrystals of large size with porous characteristics (PNC-Pt₃Ni). The mass and specific activity of the as-prepared catalyst are 6 and 6.6 times more than those of commercial Pt/C at 0.9 volts versus the reversible hydrogen electrode (RHE), respectively. More importantly, PNC-Pt₃Ni prevails against a durability test (23.7% loss of mass activity after 10 000 potential cycling) with little change to the porous morphology under harsh experimental conditions. Density functional theory calculations show a much lower activation energy for PNC-Pt₃Ni during the process of dissociation of the oxygen molecule adsorbed on the surface of the catalyst, which may account for the improvement in the catalytic activity. The lower series resistance for PNC-Pt₃Ni is also verified by electrochemical impedance spectroscopy (EIS) data, resulting from fewer grain boundaries for nanocrystals with large sizes. This exciting work contributes a new strategy for the optimization of electrochemical performance and durability.

Porous Pt₃Ni nanocrystals of large size possess enhanced electrochemical activity and durability towards oxygen reduction reaction is preferred.

Thermal Stability of Metal Nanocrystals: An Investigation of the Surface and Bulk Reconstructions of Pd Concave Icosahedra

Despite the remarkable success in controlling the synthesis of metal nanocrystals, it still remains a grand challenge to stabilize and preserve the shapes or internal structures of metastable kinetic products. In this work, we address this issue by systematically investigating the surface and bulk reconstructions experienced by a Pd concave icosahedron when subjected to heating up to 600 °C in vacuum. We used in situ high-resolution transmission electron microscopy to identify the equilibration pathways of this far-from-equilibrium structure. We were able to capture key structural transformations occurring during the thermal annealing process, which were mechanistically rationalized by implementing self-consistent plane-wave density functional theory (DFT) calculations. Specifically, the concave icosahedron was found to evolve into a regular icosahedron via surface reconstruction in the range of 200-400 °C, and then transform into a pseudospherical crystalline structure through bulk reconstruction when further heated to 600 °C. The mechanistic understanding may lead to the development of strategies for enhancing the thermal stability of metal nanocrystals.