Ultrastructure and morphogenesis of human immunodeficiency virus

Cyclophilin A as a target in the treatment of cytomegalovirus infections

BACKGROUND

Viruses are obligate parasites that depend on the cellular machinery of the host to regenerate and manufacture their proteins. Most antiviral drugs on the market today target viral proteins. However, the more recent strategies involve targeting the host cell proteins or pathways that mediate viral replication. This new approach would be effective for most viruses while minimizing drug resistance and toxicity.

METHODS

Cytomegalovirus replication, latency, and immune response are mediated by the intermediate early protein 2, the main protein that determines the effectiveness of drugs in cytomegalovirus inhibition. This review explains how intermediate early protein 2 can modify the action of cyclosporin A, an immunosuppressive, and antiviral drug. It also links all the pathways mediated by cyclosporin A, cytomegalovirus replication, and its encoded proteins.

RESULTS

Intermediate early protein 2 can influence the cellular cyclophilin A pathway, affecting cyclosporin A as a mediator of viral replication or anti-cytomegalovirus drug.

CONCLUSION

Cyclosporin A has a dual function in cytomegalovirus pathogenesis. It has the immunosuppressive effect that establishes virus replication through the inhibition of T-cell function. It also has an anti-cytomegalovirus effect mediated by intermediate early protein 2. Both of these functions involve cyclophilin A pathway.

Target cell type-dependent modulation of human immunodeficiency virus type 1 capsid disassembly by cyclophilin A

The binding of cyclophilin A (CypA) to the human immunodeficiency virus type 1 (HIV-1) capsid protein (CA protein) is required soon after virus entry into natural target cells. In Jurkat T lymphocytes, disrupting CypA-CA interaction either by cyclosporine (Cs) treatment or by alteration (e.g., P90A) of the CA inhibits HIV-1 infection. In HeLa cells, however, treatment with Cs or Cs analogues minimally inhibits the early phase of HIV-1 infection but selects for a Cs-dependent virus with a change (A92E) in CA. To understand these phenomena, we examined the effects of the P90A and A92E changes in the HIV-1 CA protein on the stability of capsid complexes assembled in vitro and on capsid disassembly in the cytosol of virus-exposed target cells. The A92E change impaired CA-CA interactions in vitro and decreased the amount of particulate capsids in the cytosol of HeLa target cells. Reducing the binding of CypA to the A92E mutant capsid, either by Cs treatment or by an additional P90A change in the CA protein, increased the amount of particulate capsids and viral infectivity in HeLa cells. In contrast, reduction of the binding of CypA to HIV-1 capsids in Jurkat T lymphocytes resulted in a decrease in the amount of particulate capsids and infectivity. Thus, depending on the capsid and the target cell, CypA-CA binding either stabilized or destabilized the capsid, indicating that CypA modulates HIV-1 capsid disassembly. In both cell types examined, decreased stability of the capsid was associated with a decrease in the efficiency of HIV-1 infection.

An Envelope-determined Endocytic Route of Viral Entry Allows HIV-1 to Escape from Secreted Phospholipase A2 Entry Blockade

Secreted phospholipases A(2) (sPLA(2)s) represent a new class of human immunodeficiency virus (HIV) inhibitors that block the early steps of virus entry into cells. Here, we applied an in vitro evolution/selection procedure to select, from primary HIV isolates, an emerging variant (HIV(RBV-3)) able to actively infect cells in the presence of sPLA(2)s. HIV(RBV-3) represents a very atypical HIV-1 isolate because, in contrast to others, this virus requires a functional endocytic machinery to infect cells. Indeed, endocytosis inhibitors that affect endosome acidification (bafilomycin A(1), monensin) and/or endosomal trafficking (nocodazole, latrunculin A) drastically reduced HIV(RBV-3) replication. Using a standardized PCR-assay, we showed that endocytosis inhibitors block HIV(RBV-3) entry just before the reverse transcription step. Concurrently, to identify the viral proteins responsible for the HIV(RBV-3) atypical behaviour, we constructed a HIV-1 molecular chimera bearing different HIV(RBV-3) proteins. We demonstrated that the sole presence of the HIV(RBV-3) envelope glycoprotein is enough, not only to confer the resistance to sPLA(2)s, but also to direct HIV(RBV-3) to the endosomal-dependent entry pathway. Interestingly, HIV(RBV-3) envelope glycoprotein sequencing revealed an unusual structural pattern with the presence of rare mutations in the N-terminal region and V1-V2 envelope loop sequence extensions. Taken together, we conclude that HIV-1 may escape from entry inhibitors, such as sPLA2s, through the selection of a particular HIV-1 envelope glycoprotein that allows HIV to infect cells via an alternative entry route that relies on endosome trafficking.

Functional surfaces of the human immunodeficiency virus type 1 capsid protein

The human immunodeficiency virus type 1 initially assembles and buds as an immature particle that is organized by the viral Gag polyprotein. Gag is then proteolyzed to produce the smaller capsid protein CA, which forms the central conical capsid that surrounds the RNA genome in the mature, infectious virus. To define CA surfaces that function at different stages of the viral life cycle, a total of 48 different alanine-scanning surface mutations in CA were tested for their effects on Gag protein expression, processing, particle production and morphology, capsid assembly, and infectivity. The 27 detrimental mutations fall into three classes: 13 mutations significantly diminished or altered particle production, 9 mutations failed to assemble normal capsids, and 5 mutations supported normal viral assembly but were nevertheless reduced more than 20-fold in infectivity. The locations of the assembly-defective mutations implicate three different CA surfaces in immature particle assembly: one surface encompasses helices 4 to 6 in the CA N-terminal domain (NTD), a second surrounds the crystallographically defined CA dimer interface in the C-terminal domain (CTD), and a third surrounds the loop preceding helix 8 at the base of the CTD. Mature capsid formation required a distinct surface encompassing helices 1 to 3 in the NTD, in good agreement with a recent structural model for the viral capsid. Finally, the identification of replication-defective mutants with normal viral assembly phenotypes indicates that CA also performs important nonstructural functions at early stages of the viral life cycle.

Replacement of the P1 amino acid of human immunodeficiency virus type 1 Gag processing sites can inhibit or enhance the rate of cleavage by the viral protease

Processing of the human immunodeficiency virus type 1 (HIV-1) Gag precursor is highly regulated, with differential rates of cleavage at the five major processing sites to give characteristic processing intermediates. We examined the role of the P1 amino acid in determining the rate of cleavage at each of these five sites by using libraries of mutants generated by site-directed mutagenesis. Between 12 and 17 substitution mutants were tested at each P1 position in Gag, using recombinant HIV-1 protease (PR) in an in vitro processing reaction of radiolabeled Gag substrate. There were three sites in Gag (MA/CA, CA/p2, NC/p1) where one or more substitutions mediated enhanced rates of cleavage, with an enhancement greater than 60-fold in the case of NC/p1. For the other two sites (p2/NC, p1/p6), the wild-type amino acid conferred optimal cleavage. The order of the relative rates of cleavage with the P1 amino acids Tyr, Met, and Leu suggests that processing sites can be placed into two groups and that the two groups are defined by the size of the P1' amino acid. These results point to a trans effect between the P1 and P1' amino acids that is likely to be a major determinant of the rate of cleavage at the individual sites and therefore also a determinant of the ordered cleavage of the Gag precursor.

Rev inhibition strongly affects intracellular distribution of human immunodeficiency virus type 1 RNAs

To define the human immunodeficiency virus type 1 (HIV-1) RNA maturation pathways, we analyzed the intracellular distribution of HIV-1 RNA and the viral regulatory proteins Rev and Tat in transfected COS cells and HIV-1-infected lymphoid C8166 cells by means of ultrastructural in situ hybridization using antisense RNA probes and immunoelectron microscopy. The intranuclear viral RNA occurs in ribonucleoprotein fibrils in the perichromatin and interchromatin regions. The simultaneous demonstration of Rev, Tat, Br-labeled RNA, and cellular proteins SC35 and CRM1 in such fibrils reveals the potential of Rev to associate with nascent HIV pre-mRNA and its splicing complex and transport machinery. In a rev-minus system, the env intron-containing, incompletely spliced viral RNAs are revealed only in the nucleus, indicating that Rev is required to initiate the transport to the cytoplasm. Moreover, env intron sequences frequently occur in the periphery of interchromatin granule clusters, while the probe containing the rev exon sequence does not associate with this nucleoplasmic domain. When cells were treated with the CRM1 inhibitor leptomycin B in the presence of Rev protein, the env intron containing HIV RNAs formed clusters throughout the nucleoplasm and accumulated at the nuclear pores. This suggests that Rev is necessary and probably also sufficient for the accumulation of incompletely spliced HIV RNAs at the nuclear pores while CRM1 is needed for translocation across the nuclear pore complex.

Host defense role of platelets: engulfment of HIV and Staphylococcus aureus occurs in a specific subcellular compartment and is enhanced by platelet activation

Platelets can bind and phagocytose infectious microorganisms and so enable their transport for a prolonged time. To investigate the subcellular events of these interactions, platelets were incubated either with Staphylococcus aureus or with HIV and analyzed by electron microscopy (EM) and immuno-EM. HIV and bacteria internalization occurred exclusively within platelets showing morphological evidence of activation. Platelet activation enhanced the degree of bacterial internalization. Immunolabeling revealed that the engulfing vacuoles and the open canalicular system (OCS) were composed of distinct antigens. The engulfing vacuoles eventually became the site of prominent alpha-granule release. In platelets incubated with HIV, characteristic endocytic vacuoles were identified close to the plasma membrane, tightly surrounding 1 or 2 HIV particles. Virus particles were also located within the OCS. Immunogold labeling for the viral core protein p24 confirmed the presence of HIV within platelets. Finally, examination of platelets from a patient with acquired immunodeficiency syndrome and high viremia suggested that HIV endocytosis may also occur in vivo.

Cryoelectron microscopic examination of human immunodeficiency virus type 1 virions with mutations in the cyclophilin A binding loop

The human immunodeficiency virus type 1 capsid protein contains a conserved P217X4PX2PX5P231 motif. Mutation at Pro-222 decreases virion incorporation of cyclophilin A, while mutation at Pro-231 abolishes infectivity. Although viral RNA incorporation and protease cleavage of the Gag precursor were not affected by these mutations, cryoelectron microscopy revealed a loss of virion maturation in P231A particles.

The life-cycle of human immunodeficiency virus type 1

The life-cycle of human immunodeficiency virus type 1 (HIV-1) has been studied using several techniques including immunoelectron microscopy and cryomicroscopy. The HIV-1 particle consists of an envelope, a core and the region between the core and the envelope (matrix). Virus particles in the extracellular space are observed as having various profiles: a central or an eccentric round electron-dense core, a bar-shaped electron-dense core, and immature doughnut-shaped particle. HIV-1 particles in the hydrated state were observed by high-resolution electron cryomicroscopy to be spherical and the lipid membrane was clearly resolved as a bilayer. Projections around the circumference were seen to be knob-like. The shapes and sizes of the projections, especially the head parts, were found to vary with each projection. HIV-1 cores were isolated with a mixture of Nonidet P40 and glutaraldehyde, and were confirmed to consist of HIV-1 Gag p24 protein by immunogold labelling. On infection, the HIV-1 virus was found to enter the cell in two ways: membrane fusion and endocytosis. After viral entry, no structures resembling virus particles could be seen in the cytoplasm. In the infected cells, positive reactions by immunolabelling suggest that HIV-1 Gag is produced in membrane-bound structures and transported to the cell surface by the cytoskeletons. A crescent electron-dense layer is then formed underneath the cell membrane. Finally, the virus particle is released from the cell surface and found extracellularly to be a complete virus particle with an electron-dense core. However, several cell clones producing defective mature, doughnut-shaped (immature) or teardrop-shaped particles were found to be produced in the extracellular space. In the doughnut-shaped particles, Gag p17 and p24 proteins exist facing each other against an inner electron-dense ring, suggesting that the inner ring consists of a precursor Gag protein showing a defect at the viral proteinase.