Novel protein structural motifs containing two-turn and longer 3(10)-helices

Automated solid-phase concatenation of Aib residues to form long, water-soluble, helical peptides

Iterative coupling of 2-aminoisobutyric acid (Aib) has been achieved rapidly and efficiently using automated solid-phase peptide synthesis, employing diisopropylcarbodiimide (DIC) in the presence of ethyl cyanohydroxyiminoacetate (Oxyma). This method has allowed the first total synthesis of the fungal antibiotic Cephaibol D, and enabled the synthesis of water-soluble oligomers of Aib containing up to an unprecedented sequence of 17 consecutive Aib residues. Conformational analysis of the Aib oligomers in aqueous solution shows a length dependence in their CD spectra, with oligomers of more than 14 Aib residues apparently adopting structured helical conformations.

Discrete analyses of protein dynamics

Protein structures are highly dynamic macromolecules. This dynamics is often analysed through experimental and/or computational methods only for an isolated or a limited number of proteins. Here, we explore large-scale protein dynamics simulation to observe dynamics of local protein conformations using different perspectives. We analysed molecular dynamics to investigate protein flexibility locally, using classical approaches such as RMSf, solvent accessibility, but also innovative approaches such as local entropy. First, we focussed on classical secondary structures and analysed specifically how β-strand, β-turns, and bends evolve during molecular simulations. We underlined interesting specific bias between β-turns and bends, which are considered as the same category, while their dynamics show differences. Second, we used a structural alphabet that is able to approximate every part of the protein structures conformations, namely protein blocks (PBs) to analyse (i) how each initial local protein conformations evolve during dynamics and (ii) if some exchange can exist among these PBs. Interestingly, the results are largely complex than simple regular/rigid and coil/flexible exchange. AbbreviationsN_eqnumber of equivalentPBProtein BlocksPDBProtein DataBankRMSfroot mean square fluctuationsCommunicated by Ramaswamy H. Sarma.

Utilizing Electron Spin Echo Envelope Modulation To Distinguish between the Local Secondary Structures of an α-Helix and an Amphipathic 310-Helical Peptide

Electron spin echo envelope modulation (ESEEM) spectroscopy was used to distinguish between the local secondary structures of an α-helix and a 3₁₀-helix. Previously, we have shown that ESEEM spectroscopy in combination with site-directed spin labeling (SDSL) and ²H-labeled amino acids (i) can probe the local secondary structure of α-helices, resulting in an obvious deuterium modulation pattern, where i+4 positions generally show larger ²H ESEEM peak intensities than i+3 positions. Here, we have hypothesized that due to the unique turn periodicities of an α-helix (3.6 residues per turn with a pitch of 5.4 Å) and a 3₁₀-helix (3.1 residues per turn with a pitch of 5.8-6.0 Å), the opposite deuterium modulation pattern would be observed for a 3₁₀-helix. In this study, ²H-labeled d₁₀-leucine (Leu) was substituted at a specific Leu residue (i) and a nitroxide spin label was positioned 2, 3, and 4 residues away (denoted i+2 to i+4) on an amphipathic model peptide, LRL₈. When LRL₈ is solubilized in trifluoroethanol (TFE), the peptide adopts an α-helical structure, and alternatively, forms a 3₁₀-helical secondary structure when incorporated into liposomes. Larger ²H ESEEM peaks in the FT frequency domain data were observed for the i+4 samples when compared to the i+3 samples for the α-helix whereas the opposite pattern was revealed for the 3₁₀-helix. These unique patterns provide pertinent local secondary structural information to distinguish between the α-helical and 3₁₀-helical structural motifs for the first time using this ESEEM spectroscopic approach with short data acquisition times (∼30 min) and small sample concentrations (∼100 μM) as well as providing more site-specific secondary structural information compared to other common biophysical approaches, such as CD.

The influence of flanking secondary structures on amino Acid content and typical lengths of 3/10 helices

We used 3D structures of a highly redundant set of bacterial proteins encoded by genes of high, average, and low GC-content. Four types of connecting bridges—regions situated between any of two major elements of secondary structure (alpha helices and beta strands)—containing a pure random coil were compared with connecting bridges containing 3/10 helices. We included discovered trends in the original “VVTAK Connecting Bridges” algorithm, which is able to predict more probable conformation for a given connecting bridge. The highest number of significant differences in amino acid usage was found between 3/10 helices containing bridges connecting two beta strands (they have increased Phe, Tyr, Met, Ile, Leu, Val, and His usages but decreased usages of Asp, Asn, Gly, and Pro) and those without 3/10 helices. The typical (most common) length of 3/10 helices situated between two beta strands and between beta strand and alpha helix is equal to 5 amino acid residues. The preferred length of 3/10 helices situated between alpha helix and beta strand is equal to 3 residues. For 3/10 helices situated between two alpha helices, both lengths (3 and 5 amino acid residues) are typical.

IP6K structure and the molecular determinants of catalytic specificity in an inositol phosphate kinase family

Inositol trisphosphate kinases (IP3Ks) and inositol hexakisphosphate kinases (IP6Ks) each regulate specialized signalling activities by phosphorylating either InsP3 or InsP6 respectively. The molecular basis for these different kinase activities can be illuminated by a structural description of IP6K. Here we describe the crystal structure of an Entamoeba histolytica hybrid IP6K/IP3K, an enzymatic parallel to a 'living fossil'. Through molecular modelling and mutagenesis, we extrapolated our findings to human IP6K2, which retains vestigial IP3K activity. Two structural elements, an α-helical pair and a rare, two-turn 310 helix, together forge a substrate-binding pocket with an open clamshell geometry. InsP6 forms substantial contacts with both structural elements. Relative to InsP6, enzyme-bound InsP3 rotates 55° closer to the α-helices, which provide most of the protein's interactions with InsP3. These data reveal the molecular determinants of IP6K activity, and suggest an unusual evolutionary trajectory for a primordial kinase that could have favored efficient bifunctionality, before propagation of separate IP3Ks and IP6Ks.

Protein secondary structure classification revisited: processing DSSP information with PSSC

A first step toward three-dimensional protein structure description is the characterization of secondary structure. The most widely used program for secondary structure assignment remains DSSP, introduced in 1983, with currently more than 400 citations per year. DSSP output is in a one-letter representation, where much of the information on DSSP's internal description is lost. Recently it became evident that DSSP overlooks most π-helical structures, which are more prevalent and important than anticipated before. We introduce an alternative concept, representing the internal structure characterization of DSSP as an eight-character string that is human-interpretable and easy to parse by software. We demonstrate how our protein secondary structure characterization (PSSC) code allows for inspection of complicated structural features. It recognizes ten times more π-helical residues than does the standard DSSP. The plausibility of introduced changes in interpreting DSSP information is demonstrated by better clustering of secondary structures in (φ, ψ) dihedral angle space. With a sliding sequence window (SSW), helical assignments with PSSC remain invariant compared with an assignment based on the complete structure. In contrast, assignment with DSSP can be changed by residues in the neighborhood that are in fact not interacting with the residue under consideration. We demonstrate how one can easily define new secondary structure classification schemes with PSSC and perform the classifications. Our approach works without changing the DSSP source code and allows for more detailed protein characterization.

ScrewFit: combining localization and description of protein secondary structure

A new application of the ScrewFit algorithm [Kneller & Calligari (2006), Acta Cryst. D62, 302-311] is presented which adds the detection of protein secondary-structure elements to their detailed geometrical description in terms of a curve with intrinsic torsion. The extension is based on confidence and persistence criteria for the ScrewFit parameters which are established by analyzing the structural fluctuations of standard motifs in the SCOP fold classes. The agreement with the widely used DSSP method is comparable with the general consensus among other methods in the literature. This combination of secondary-structure detection and analysis is illustrated for the enzyme adenylate kinase.

Application of principal component analysis to determine the key structural features contributing to iron superoxide dismutase thermostability

Iron superoxide dismutase (Fe-SOD) is predominantly found in bacteria and mitochondria. The thermal stability of Fe-SOD from different sources can vary dramatically. We have studied the influence of structural parameters on Fe-SOD thermostability by principal component analysis (PCA). The results show that an increased α-helical and turn content, an increased α-helix and loop length, an increase in the number of main-main chains and charged-uncharged hydrogen bonds, a decrease in the 3(10) -helix content, and a decreased β-strand and loop length are all important factors for Fe-SOD thermostability. Interestingly, the use of charged residues to form salt bridges is tendentious in thermophilic Fe-SOD. Negatively charged Arg and positively charged Glu are efficiently used to form salt bridges. The cooperative action of the exposed area, the hydrogen bonds, and the secondary structure plays a crucial role in resisting high temperatures, which demonstrates that the increased stability of thermophilic Fe-SOD is provided by several structural factors acting together.

Comparison of the structural basis for thermal stability between archaeal and bacterial proteins

In this study, the structural basis for thermal stability in archaeal and bacterial proteins was investigated. There were many common factors that confer resistance to high temperature in both archaeal and bacterial proteins. These factors include increases in the Lys content, the bends and blanks of secondary structure, the Glu content of salt bridge; decreases in the number of main-side chain hydrogen bond and exposed surface area, and changes in the bends and blanks of amino acids. Certainly, the utilization of charged amino acids to form salt bridges is a primary factor. In both heat-resistant archaeal and bacterial proteins, most Glu and Asp participate in the formation of salt bridges. Other factors may influence either archaeal or bacterial protein thermostability, which includes the more frequent occurrence of shorter 3(10)-helices and increased hydrophobicity in heat-resistant archaeal proteins. However, there were increases in average helix length, the Glu content in salt bridges, temperature factors and decreases in the number of main-side chain hydrogen bonds, uncharged-uncharged hydrogen bonds, hydrophobicity, and buried and exposed polar surface area in heat-resistant bacterial proteins. Evidently, there are few similarities and many disparities between the heat-resistant mechanisms of archaeal and bacterial proteins.

3₁₀-helix conformation facilitates the transition of a voltage sensor S4 segment toward the down state

The activation of voltage-gated ion channels is controlled by the S4 helix, with arginines every third residue. The x-ray structures are believed to reflect an open-inactivated state, and models propose combinations of translation, rotation, and tilt to reach the resting state. Recently, experiments and simulations have independently observed occurrence of 3(10)-helix in S4. This suggests S4 might make a transition from α- to 3(10)-helix in the gating process. Here, we show 3(10)-helix structure between Q1 and R3 in the S4 segment of a voltage sensor appears to facilitate the early stage of the motion toward a down state. We use multiple microsecond-steered molecular simulations to calculate the work required for translating S4 both as α-helix and transformed to 3(10)-helix. The barrier appears to be caused by salt-bridge reformation simultaneous to R4 passing the F233 hydrophobic lock, and it is almost a factor-two lower with 3(10)-helix. The latter facilitates translation because R2/R3 line up to face E183/E226, which reduces the requirement to rotate S4. This is also reflected in a lower root mean-square deviation distortion of the rest of the voltage sensor. This supports the 3(10) hypothesis, and could explain some of the differences between the open-inactivated- versus activated-states.

A fresh look at the Ramachandran plot and the occurrence of standard structures in proteins

The Ramachandran plot is among the most central concepts in structural biology, seen in publications and textbooks alike. However, with the increasing numbers of known protein-structures and greater accuracy of ultra-high resolution protein structures, we are still learning more about the basic principles of protein structure. Here we use high fidelity conformational information to explore novel ways, such a geo-style and wrapped Ramachandran plots, to convey some of the basic aspects of the Ramachandran plot and of protein conformation. We point out the pressing need for a standard nomenclature for peptide conformation and propose such a nomenclature. Finally, we summarize some recent conceptual advances related to the building blocks of protein structure. The results for linear groups imply the need for substantive revisions in how the basics of protein structure are handled.

Structure and alignment of the membrane-associated peptaibols ampullosporin A and alamethicin by oriented 15N and 31P solid-state NMR spectroscopy

Ampullosporin A and alamethicin are two members of the peptaibol family of antimicrobial peptides. These compounds are produced by fungi and are characterized by a high content of hydrophobic amino acids, and in particular the alpha-tetrasubstituted amino acid residue ?-aminoisobutyric acid. Here ampullosporin A and alamethicin were uniformly labeled with (15)N, purified and reconstituted into oriented phophatidylcholine lipid bilayers and investigated by proton-decoupled (15)N and (31)P solid-state NMR spectroscopy. Whereas alamethicin (20 amino acid residues) adopts transmembrane alignments in 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) or 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) membranes the much shorter ampullosporin A (15 residues) exhibits comparable configurations only in thin membranes. In contrast the latter compound is oriented parallel to the membrane surface in 1,2-dimyristoleoyl-sn-glycero-3-phosphocholine and POPC bilayers indicating that hydrophobic mismatch has a decisive effect on the membrane topology of these peptides. Two-dimensional (15)N chemical shift -(1)H-(15)N dipolar coupling solid-state NMR correlation spectroscopy suggests that in their transmembrane configuration both peptides adopt mixed alpha-/3(10)-helical structures which can be explained by the restraints imposed by the membranes and the bulky alpha-aminoisobutyric acid residues. The (15)N solid-state NMR spectra also provide detailed information on the helical tilt angles. The results are discussed with regard to the antimicrobial activities of the peptides.

Conformational preferences of a short Aib/Ala-based water-soluble peptide as a function of temperature

The amino acid Aib predisposes a peptide to be helical with context-dependent preference for either 3(10)- or alpha- or a mixed helical conformation. Short peptides also show an inherent tendency to be unfolded. To characterize helical and unfolded states adopted by water-soluble Aib-containing peptides, the conformational preference of Ac-Ala-Aib-Ala-Lys-Ala-Aib-Lys-Ala-Lys-Ala-Aib-Tyr-NH(2) was determined by CD, NMR and MD simulations as a function of temperature. Temperature-dependent CD data indicated the contribution of two major components, each an admixture of helical and extended/polyproline II structures. Both right- and left-handed helical conformations were detected from deconvolution of CD data and (13)C NMR experiments. The presence of a helical backbone, more pronounced at the N-terminal, and a temperature-induced shift in alpha-helix/3(10)-helix equilibrium, more pronounced at the C-terminal, emerged from NMR data. Starting from polyproline II, the N-terminal of the peptide folded into a helical backbone in MD simulations within 5 ns at 60 degrees C. Longer simulations showed a mixed-helical backbone to be stable over the entire peptide at 5 degrees C while at 60 degrees C the mixed-helix was either stable at the N-terminus or occurred in short stretches through out the peptide, along with a significant population of polyproline II. Our results point towards conformational heterogeneity of water-soluble Aib-based peptide helices and the associated subtleties. The problem of analyzing CD and NMR data of both left- and right-handed helices are discussed, especially the validity of the ellipticity ratio [theta](222)/[theta](207), as a reporter of alpha-/3(10)- population ratio, in right- and left-handed helical mixtures.

Carbonyl Reductases and Pluripotent Hydroxysteroid Dehydrogenases of the Short-chain Dehydrogenase/reductase Superfamily

Carbonyl reduction of aldehydes, ketones, and quinones to their corresponding hydroxy derivatives plays an important role in the phase I metabolism of many endogenous (biogenic aldehydes, steroids, prostaglandins, reactive lipid peroxidation products) and xenobiotic (pharmacologic drugs, carcinogens, toxicants) compounds. Carbonyl-reducing enzymes are grouped into two large protein superfamilies: the aldo-keto reductases (AKR) and the short-chain dehydrogenases/reductases (SDR). Whereas aldehyde reductase and aldose reductase are AKRs, several forms of carbonyl reductase belong to the SDRs. In addition, there exist a variety of pluripotent hydroxysteroid dehydrogenases (HSDs) of both superfamilies that specifically catalyze the oxidoreduction at different positions of the steroid nucleus and also catalyze, rather nonspecifically, the reductive metabolism of a great number of nonsteroidal carbonyl compounds. The present review summarizes recent findings on carbonyl reductases and pluripotent HSDs of the SDR protein superfamily.

Onset of 3(10)-helical secondary structure in aib oligopeptides probed by coherent 2D IR spectroscopy

We have investigated the onset of the secondary structure and the evolution of two-dimensional infrared (2D IR) spectral patterns as a function of chain length with a study of 3(10)-helical peptides. The results show that 2D IR is highly sensitive to peptide conformation, disorder, and size. An extensive set of 2D IR spectra of C (alpha)-methylated homopeptides, Z-(Aib) n -O tBu ( n = 3, 5, 8, and 10), in CDCl 3 was measured in the amide-I region. The 2D spectral patterns of the tripeptide are quite different from those of the longer peptides. The spectral signatures begin to converge at the pentapeptide and become almost the same for the octa- and decapeptide. Simulations employing a vibrational exciton model were performed, with the local mode frequency shifts estimated from the intramolecular hydrogen bond electrostatic energies. The 2D spectra are well simulated using dihedral angle distributions around the average values (phi, psi) approximately (-57 degrees , -31 degrees) with a width of approximately 21 degrees. The simulated site-dependent amide-I local mode frequencies are in agreement with those from scaled semiempirical AM1 calculations. The tripeptide exhibits a more noticeable discrepancy between the experimental and simulated cross-peak patterns. This behavior suggests the presence of a peptide population outside the single beta-turn conformation. The onset of the 3(10)-helical secondary structure appears to already occur at the pentapeptide level.

Structural insight into an ankyrin-sensitive lipid-binding site of erythroid beta-spectrin

It was recently shown that the region within beta-spectrin responsible for interactions with ankyrin includes a lipid-binding site which displayed sensitivity to inhibition by ankyrin. We studied its structure by constructing a series of single and double spin-labeled beta-spectrin-derived peptides and analyzing their spin-spin distances via electron paramagnetic resonance spectroscopy and the Fourier deconvolution method. The results indicate that the whole ankyrin-sensitive lipid-binding site of beta-spectrin exhibits a helical conformation revealing a distinct 3(10)-helix contribution at its N-terminus. The start of the helix was located five residues upstream along the sequence compared to the theoretical predictions. A model based on the obtained data provides direct evidence that the examined lipid-binding site is a highly amphipathic helix, which is correlated with the specific conformation of its N-terminal fragment.

Comparison of cytochromes b5 from insects and vertebrates

We report a 1.55 A X-ray crystal structure of the heme-binding domain of cytochrome b(5) from Musca domestica (house fly; HF b(5)), and compare it with previously published structures of the heme-binding domains of bovine microsomal cytochrome b(5) (bMc b(5)) and rat outer mitochondrial membrane cytochrome b(5) (rOM b(5)). The structural comparison was done in the context of amino acid sequences of all known homologues of the proteins under study. We show that insect b(5)s contain an extended hydrophobic patch at the base of the heme binding pocket, similar to the one previously shown to stabilize mammalian OM b(5)s relative to their Mc counterparts. The hydrophobic patch in insects includes a residue with a bulky hydrophobic side chain at position 71 (Met). Replacing Met71 in HF b(5) with Ser, the corresponding residue in all known mammalian Mc b(5)s, is found to substantially destabilize the holoprotein. The destabilization is a consequence of two related factors: (1) a large decrease in apoprotein stability and (2) extension of conformational disruption in the apoprotein beyond the empty heme binding pocket (core 1) and into the heme-independent folding core (core 2). Analogous changes have previously been shown to accompany replacement of Leu71 in rOM b(5) with Ser. That the stabilizing role of Met71 in HF b(5) is manifested primarily in the apo state is highlighted by the fact that its crystallographic Calpha B factor is modestly larger than that of Ser71 in bMc b(5), indicating that it slightly destabilizes local polypeptide conformation when heme is in its binding pocket. Finally, we show that the final unit of secondary structure in the cytochrome b(5) heme-binding domain, a 3(10) helix known as alpha6, differs substantially in length and packing interactions not only for different protein isoforms but also for given isoforms from different species.

Crystal-state 3D-structural characterization of novel, Aib-based, turn and helical peptides

The crystal-state conformations of the hexapeptide amide Pht-(Aib)(6)-NH-C(CH(3))(2)-O-OtBu (7), the hexapeptide Ac-L-aIle-(Aib)(5)-OtBu (6), the pentapeptide Z-(Aib)(3)-L-Glu(OtBu)-Aib-O-(CH(2))(2)-(1)Nap (5), the tetrapeptides Z-(Aib)(2)-L-His(N(tau)-Trt)-Aib-OMe (4 I) and Z-(Aib)(2)-L-Nva-Aib-OtBu (4 II), the tripeptide Pyr-(Aib)(3)-OtBu (3 I), the dipeptide amides Pyr-(Aib)(2)-(4)NH-TEMPO (3 II) and Piv-(Aib)(2)-NH-C(CH(3))(2)-O-OtBu (3 III), and the dipeptides Pht-Aib-betaAc(6)c-OtBu (2 I), Pht-Aib-NH-C(CH(3))(2)-O-OtBu (2 II) and Boc-gGly-mAib-OH (2 III) have been determined by X-ray diffraction analyses. All peptides investigated are characterized by one or more turn/helix forming Aib residues. Except the three short dipeptides, all are folded into C==O...H--N intramolecularly H-bonded 3(10)-helices, or into various types of beta-turns. In the structure of 6, two independent molecules of opposite screw sense were observed in the asymmetric unit, generating diastereomeric 3(10)-helices.

3(10)-helices in proteins are parahelices

The 3(10)-helix is characterized by having at least two consecutive hydrogen bonds between the main-chain carbonyl oxygen of residue i and the main-chain amide hydrogen of residue i + 3. The helical parameters--pitch, residues per turn, radius, and root mean square deviation (rmsd) from the best-fit helix--were determined by using the HELFIT program. All 3(10)-helices were classified as regular or irregular based on rmsd/(N - 1)1/2 where N is the helix length. For both there are systematic, position-specific shifts in the backbone dihedral angles. The average phi, psi shift systematically from approximately -58 degrees, approximately -32 degrees to approximately -90 degrees, approximately -4 degrees for helices 5, 6, and 7 residues long. The same general pattern is seen for helices, N = 8 and 9; however, in N = 9, the trend is repeated with residues 6, 7, and 8 approximately repeating the phi, psi of residues 2, 3, and 4. The residues per turn and radius of regular 3(10)-helices decrease with increasing length of helix, while the helix pitch and rise per residue increase. That is, regular 3(10)-helices become thinner and longer as N increases from 5 to 8. The fraction of regular 3(10)-helices decreases linearly with helix length. All longer helices, N > or = 9 are irregular. Energy minimizations show that regular helices become less stable with increasing helix length. These findings indicate that the definition of 3(10)-helices in terms of average, uniform dihedral angles is not appropriate and that it is inherently unstable for a polypeptide to form an extended, regular 3(10)-helix. The 3(10)-helices observed in proteins are better referred to parahelices.

A structural determinant of human cytomegalovirus US2 dictates the down-regulation of class I major histocompatibility molecules

Human cytomegalovirus down-regulates cell surface class I major histocompatibility (MHC) molecules, thus allowing the virus to proliferate while avoiding detection by CD8+ T lymphocytes. The unique short gene product US2 is a 199-amino acid type I endoplasmic reticulum glycoprotein that modulates surface expression of class I MHC products by targeting class I heavy chains for dislocation from the endoplasmic reticulum to the cytosol, where they undergo proteasomal degradation. Although the mechanism by which this viral protein targets class I heavy chains for destruction remains unclear, the putative US2 cytoplasmic tail comprised of only 14 residues is known to play a functional role. To determine the specific residues critical for mediating class I degradation, a mutagenesis analysis of the cytoplasmic tail of US2 was performed. Using truncation mutants, the removal of only 4 residues (mutant US2(195)) from the US2 carboxyl terminus completely abolishes class I destruction. Furthermore, site-directed mutagenesis of the US2 cytoplasmic tail revealed that the most critical residues for class I-induced destruction, cysteine 187, serine 190, tryptophan 193, and phenylalanine 196, occurs every third residue. This experimental data supports a model that the US2 cytoplasmic tail is in a 3(10) helical configuration. Such a secondary structure would predict that one side of the 3(10) helical cytoplasmic tail would interact with the extraction apparatus to facilitate the dislocation and subsequent destruction of class I heavy chains.

Structural plasticity of an aminoacyl-tRNA synthetase active site

Recently, tRNA aminoacyl-tRNA synthetase pairs have been evolved that allow one to genetically encode a large array of unnatural amino acids in both prokaryotic and eukaryotic organisms. We have determined the crystal structures of two substrate-bound Methanococcus jannaschii tyrosyl aminoacyl-tRNA synthetases that charge the unnatural amino acids p-bromophenylalanine and 3-(2-naphthyl)alanine (NpAla). A comparison of these structures with the substrate-bound WT synthetase, as well as a mutant synthetase that charges p-acetylphenylalanine, shows that altered specificity is due to both side-chain and backbone rearrangements within the active site that modify hydrogen bonds and packing interactions with substrate, as well as disrupt the alpha8-helix, which spans the WT active site. The high degree of structural plasticity that is observed in these aminoacyl-tRNA synthetases is rarely found in other mutant enzymes with altered specificities and provides an explanation for the surprising adaptability of the genetic code to novel amino acids.

3(10)-Helix adjoining alpha-helix and beta-strand: sequence and structural features and their conservation

Does the amino acid use at the terminal positions of an alpha-helix become altered depending on the context-more specifically, when there is an adjoining 3(10)-helix, and can a single helical cylinder encompass the resultant composite helix? An analysis of 138 and 107 cases of 3(10)-alpha and alpha-3(10) composite helices, respectively, found in known protein structures indicate that the secondary structural element occurring first imposes its characteristics on the sequence of the structural element coming next. Thus, when preceded by a 3(10)-helix, the preference of proline to occur at the N1 position of an alpha-helix is shifted to the N2 position, a typical characteristic of the C-terminal capping of the 3(10)-helix. When an alpha- or a 3(10)-helix leads into a helix of the other type, there is a bend at the junction, especially for the 3(10)-alpha composite, with the two junction residues facing inward and buried within the structure. Thus a single helical cylinder may not properly represent a composite helix, the bend providing a means for the tertiary structure to assume a globular shape, very much akin to what a proline-induced kink does to an alpha-helix. The tertiary structural context in which beta-3(10) and 3(10)-beta composites occurs can be different, causing the angle between the secondary structural elements in the two cases to be different. Composites of 3(10)-helices and beta-strands are much more conserved among members in families of homologous structures than those between two types of helices; in many of the former instances, the 3(10)-helix constitutes the loops in beta-hairpin or beta-beta-corner motifs. The overall fold of the chain may be more conserved than the actual identify of the secondary structure elements in a composite.

Trichogin: a paradigm for lipopeptaibols

Lipopeptaibols are members of a novel family of naturally occurring, short peptides with antimicrobial activity, characterized by a lipophilic acyl chain at the N-terminus, a high content of turn/helix inducing alpha-aminoisobutyric acid and a 1,2-amino alcohol at the C-terminus. Using solution methods, the prototypical lipopeptaibol trichogin GA IV and a large series of appropriately designed analogues were synthesized, which allow: (i) determination of the minimal lipid chain and peptide main-chain lengths for the onset of membrane activity, and (ii) exploitation of a number of physico-chemical techniques aimed at assessing the trichogin preferred conformation under a variety of conditions and at investigating its mechanism of interaction with the phospholipid membranes.

Molecular spacers for physicochemical investigations based on novel helical and extended peptide structures

A proper understanding of the detailed nature and mechanism of physicochemical interactions depends heavily upon our ability to design and synthesize conformationally constrained 3D structures whose intercomponent geometry (either rigorously rigid or able to undergo destructuration, if required, but in all cases precisely tunable) would be well defined. To this end we have recently reported a few initial studies and we are currently working on the exploitation of stable, short, helical peptide spacers based on achiral and/or chiral Calpha-tetrasubstituted alpha-amino acids. These building blocks are known to force the peptides either to predominantly fold into a 3(10)-helical structure or to adopt a fully extended, planar 2.0(5)-helix. The systems under investigation involve a donor and an acceptor moiety linked to the N- and C-termini of the oligopeptide spacer main chain. By increasing the number of intervening residues the donor.acceptor separation can be easily modulated. This review highlights details of these two novel peptide secondary structures and their use as molecular spacers in physicochemical investigations.

Sequence and structure patterns in proteins from an analysis of the shortest helices: implications for helix nucleation

The shortest helices (three-length 3(10) and four-length alpha), most abundant among helices of different lengths, have been analyzed from a database of protein structures. A characteristic feature of three-length 3(10)-helices is the shifted backbone conformation for the C-terminal residue (phi,psi angles: -95 degrees,0 degrees ), compared to the rest of the helix (-62 degrees,-24 degrees ). The deviation can be attributed to the release of electrostatic repulsion between the carbonyl oxygen atoms at the two C-terminal residues and further stabilization (due to a more linear geometry) of an intrahelical hydrogen bond. A consequence of this non-canonical C-terminal backbone conformation can be a potential origin of helix kinks when a 3(10)-helix is sequence-contiguous at the alpha-helix N-terminal. An analysis of hydrogen bonding, as well as hydrophobic interactions in the shortest helices shows that capping interactions, some of them not observed for longer helices, dominate at the N termini. Further, consideration of the distribution of amino acid residues indicates that the shortest helices resemble the N-terminal end of alpha-helices rather than the C terminus, implying that the folding of helices may be initiated at the N-terminal end, which does not get propagated in the case of the shortest helices. Finally, pairwise comparison of beta-turns and the shortest helices, based on correlation matrices of site-specific amino acid composition, and the relative abundance of these short secondary structural elements, leads to a helix nucleation scheme that considers the formation of an isolated beta-turn (and not an alpha-turn) as the helix nucleation step, with shortest 3(10)-helices as intermediates between the shortest alpha-helix and the beta-turn. Our results ascribe an important role played by shortest 3(10)-helices in proteins with important structural and folding implications.

Crystal-state 3D-structural characterization of novel 310-helical peptides

The crystal-state conformations of two octapeptides, pBrBz-(D-Iva)8-OtBu (8I) and Ac-[L-(alphaMe)Val]8-OH (8II), the heptapeptide Z-[L-(alphaMe)Val]7-OH (7), the hexapeptide Z-[L-(alphaMe)Leu]6-OtBu (6) and the tetrapeptide alkylamide Z-(Aib)2-L-Glu(OMe)-L-Ala-L-Lol (5) were assessed by x-ray diffraction analyses. Two independent molecules are observed in the asymmetric unit of each L-(alphaMe)Val homo-peptide. All four homo-peptides are folded in a regular 3(10)-helical structure (only the C-terminal H-bonded conformation of the D-Iva octapeptide is distorted to a type-I beta-turn). The hydroxyl groups of the C-terminal carboxyl moieties of the two L-(alphaMe)Val homo-peptides participate in an oxy-analogue of the type-III beta-turn conformation. While the two L-(alphaMe)Val 3(10)-helices are right-handed, the D-Iva and L-(alphaMe)Leu helices are left-handed. The tetrapeptide alkylamide is 3(10)-helical at the N-terminus, but it is mixed 3(10)/alpha-helical at the C-terminus.

Discriminating 3(10)- from alpha-helices: vibrational and electronic CD and IR absorption study of related Aib-containing oligopeptides

Model peptides based on -(Aib-Ala)(n)-, and (Aib)(n)-Leu-(Aib)(2) sequences, which have varying amounts of 3(10)-helical character, were studied by use of vibrational and electronic circular dichroism (VCD and ECD) and Fourier transform infrared (FTIR) absorption spectroscopies to test the correlation of spectral response and conformation. The data indicate that these peptides, starting from a length of about four to six residues, predominantly adopt a 3(10)-helical conformation at room temperature. The longest model peptides, depending on the series, may evidence some alpha-helical contribution to the spectra, while the shorter ones, with less than six residues, have much less order. The IR absorption spectra (as supported by theory) showed only small frequency changes between 3(10)- and alpha-helices. By contrast, solvent effects are a source of much bigger perturbations. The ECD results show that the intensity ratio for the approximately 222-nm to approximately 208-nm bands, while useful for distinguishing between these two helical types in some sequences, may have a narrower range of application than VCD. However, the VCD data presented here continue to support the proposed discrimination between alpha- and 3(10)-helices based on qualitative amide I and II bandshape differences. The present study shows the intensities of the 3(10)-helical amide I (peak-to-peak) to its amide II VCD to be of the same order and useful for discriminating them from alpha-helices, whose amide I dominates the amide II in intensity. This qualitative result is experimentally independent of the amount of alphaMe-substituted residues in the sequence. These experimental VCD results are consistent in detail with theoretical spectral simulations for Ac-(Ala)(8)-NH(2), Ac-(Aib-Ala)(4)-NH(2), and Ac-(Aib)(8)-NH(2) in 3(10)- and alpha-helical conformations.

Variants of 3(10)-helices in proteins

An analysis of the shortest 3(10)-helices, containing three helical residues and two flanking capping residues that participate in two consecutive i + 3 --> i hydrogen bonds, shows that not all helices belong to the classic 3(10)-helix, where the three central residues adopt the right-handed helical conformation (alpha(R)). Three variants identified are: 3L10-helix with all residues in the left-handed helical region (alpha(L)), 3EL10-helix where the first residue is in the extended region followed by two residues in the alpha(L) conformation, and its mirror-image, the 3E'R10-helix. In the context of these helices, as well as the equivalent variants of alpha-helices, the length dependence of the handedness of secondary structures in protein structure is discussed. There are considerable differences in the amino acid preferences at different positions in the various types of 3(10)-helices. Each type of 3(10)-helix can be thought to be made up of an extension of a particular type of beta-turn (made up of residues i to i + 3) such that the (i + 3)th residue assumes the same conformation as the preceding residue. Distinct residue preferences at i and i + 3 positions seem to decide whether a particular stretch of four residues will be a beta-turn or a 3(10)-helix in the folded structure.

Factors governing 3(10)-helix vs alpha-helix formation in peptides: percentage of C(alpha)-tetrasubstituted alpha-amino acid residues and sequence dependence

As an additional step toward the dissection of the factors responsible for the onset of 3(10)-helix vs alpha-helix in peptides, in this paper we describe the results of a three-dimensional (3D) structural analysis by x-ray diffraction of the N(alpha)-acylated heptapeptide alkylamide mBrBz-L-Iva-L-(alphaMe)Val-L-Abu-L-(alphaMe)Val-L-(alphaMe)Phe-L-(alphaMe)Val-L-Iva-NHMe characterized by a single (L-Abu3) C(alpha)-trisubstituted and six C(alpha)-tetrasubstituted alpha-amino acids. We find that in the crystal state this peptide is folded in a mixed helical structure with short elements of 3(10)-helix at either terminus and a central region of alpha-helix. This finding, taken together with the published NMR and x-ray diffraction data on the all C(alpha)-methylated parent sequence and its L-Val2 analog (also the latter heptapeptide has a single C(alpha)-trisubstituted alpha-amino acid) strongly supports the view that one C(alpha)-trisubstituted alpha-amino acid inserted near the N-terminus of an N(alpha)-acylated heptapeptide alkylamide sequence may be enough to switch a regular 3(10)-helix into an essentially alpha-helical conformation. As a corollary of this work, the x-ray diffraction structure of the N(alpha)-protected, C-terminal tetrapeptide alkylamide Z-L-(alphaMe)Val-L-(alphaMe)Phe-L-(alphaMe)Val-L-Iva-NHMe, also reported here, is clearly indicative of the preference of this fully C(alpha)-methylated, short peptide for the 3(10)-helix. As the same terminally blocked sequence is mixed 3(10)/alpha-helical in the L-Abu3 heptapeptide amide but regular 3(10)-helical in the tetrapeptide amide and in the parent heptapeptide amide, these results point to an evident plasticity even of a fully C(alpha)-methylated short peptide.

Aromatic-aromatic interactions in and around alpha-helices

To understand the role of aromatic-aromatic interactions in imparting specificity to the folding process, the geometries of four aromatic residues with different sequence spacing, located in alpha-helices or five residues from helical ends, interacting with each other have been elucidated. The geometry is found to depend on the sequence difference. Specific interactions (C-H...pi and N-H...pi) which result from this geometry may cause a given pair of residues (such as Phe-His) with a particular sequence difference to occur more than expected. The most conspicuous residue in an aromatic pair in the context of helix stability is His, which is found at the last (C1) position or the two positions (Ncap and Ccap) immediately flanking the helix. An alpha-helix and a contiguous 3(10)-helix or two helices separated by a non-helical residue can have interacting aromatic pairs, the geometry of interaction and the relative orientation between the helices being rather fixed. Short helices can also have interacting residues from either side.

The interrelationships of side-chain and main-chain conformations in proteins

The accurate determination of a large number of protein structures by X-ray crystallography makes it possible to conduct a reliable statistical analysis of the distribution of the main-chain and side-chain conformational angles, how these are dependent on residue type, adjacent residue in the sequence, secondary structure, residue-residue interactions and location at the polypeptide chain termini. The interrelationship between the main-chain (phi, psi) and side-chain (chi 1) torsion angles leads to a classification of amino acid residues that simplify the folding alphabet considerably and can be a guide to the design of new proteins or mutational studies. Analyses of residues occurring with disallowed main-chain conformation or with multiple conformations shed some light on why some residues are less favoured in thermophiles.