Homology modeling of the multicopper oxidase Fet3 gives new insights in the mechanism of iron transport in yeast

Comparative transcriptome analysis provides insights into the resistance regulation mechanism and inhibitory effect of fungicide phenamacril in Fusarium asiaticum

Fusarium asiaticum is a destructive phytopathogenic fungus that causes Fusarium head blight of wheat (FHB), leading to serious yield and economic losses to cereal crops worldwide. Our previous studies indicated that target-site mutations (K216R/E, S217P/L, or E420K/G/D) of Type I myosin FaMyo5 conferred high resistance to phenamacril. Here, we first constructed one sensitive strain H1S and three point mutation resistant strains HA, HC and H1R. Then we conducted comparative transcriptome analysis of these F. asiaticum strains after 1 and 10 μg·mL-1 phenamacril treatment. Results indicated that 2135 genes were differentially expressed (DEGs) among the sensitive and resistant strains. The DEGs encoding ammonium transporter MEP1/MEP2, nitrate reductase, copper amine oxidase 1, 4-aminobutyrate aminotransferase, amino-acid permease inda1, succinate-semialdehyde dehydrogenase, 2, 3-dihydroxybenzoic acid decarboxylase, etc., were significantly up-regulated in all the phenamacril-resistant strains. Compared to the control group, a total of 1778 and 2097 DEGs were identified in these strains after 1 and 10 μg·mL-1 phenamacril treatment, respectively. These DEGs involved in 4-aminobutyrate aminotransferase, chitin synthase 1, multiprotein-bridging factor 1, transcriptional regulatory protein pro-1, amino-acid permease inda1, ATP-dependent RNA helicase DED1, acetyl-coenzyme A synthetase, sarcoplasmic/endoplasmic reticulum calcium ATPase 2, etc., showed significantly down-regulated expression in phenamacril-sensitive strain but not in resistant strains after phenamacril treatment. In addition, cyanide hydratase, mating-type protein MAT-1, putative purine nucleoside permease, plasma membrane protein yro2, etc., showed significantly co-down-regulated expression in all the strains after phenamacril treatment. Taken together, This study provides deep insights into the resistance regulation mechanism and the inhibitory effect of fungicide phenamacril and these new annotated proteins or enzymes are worth for the discovery of new fungicide targets.

Multicopper oxidases with laccase-ferroxidase activity: Classification and study of ferroxidase activity determinants in a member from Heterobasidion annosum s. l

Multi-copper oxidases (MCO) share a common molecular architecture and the use of copper ions as cofactors to reduce O₂ to H₂O, but show high sequence heterogeneity and functional diversity. Many new emerging MCO genes are wrongly annotated as laccases, the largest group of MCOs, with the widest range of biotechnological applications (particularly those from basidiomycete fungi) due to their ability to oxidise aromatic compounds and lignin. Thus, comprehensive studies for a better classification and structure-function characterisation of MCO families are required. Laccase-ferroxidases (LAC-FOXs) constitute a separate and unexplored group of MCOs with proposed dual features between laccases and ferroxidases. We aim to better define this cluster and the structural determinants underlying putative hybrid activity. We performed a phylogenetic analysis of the LAC-FOXs from basidiomycete fungi, that resulted in two subgroups. This division seemed to correlate with the presence or absence of some of the three acidic residues responsible for ferroxidase activity in Fet3p from Saccharomyces cerevisiae. One of these LAC-FOXs (with only one of these residues) from the fungus Heterobasidion annosum s. l. (HaLF) was synthesised, heterologously expressed and characterised to evaluate its catalytic activity. HaLF oxidised typical laccase substrates (phenols, aryl amines and N-heterocycles), but no Fe (II). The enzyme was subjected to site-directed mutagenesis to determine the key residues that confer ferroxidase activity. The mutated HaLF variant with full restoration of the three acidic residues exhibited efficient ferroxidase activity, while it partially retained the wide-range oxidative activity of the native enzyme associated to laccases sensu stricto.

Identification and characterization of laccase-type multicopper oxidases involved in dye-decolorization by the fungus Leptosphaerulina sp

Background

Fungal laccases are multicopper oxidases (MCOs) with high biotechnological potential due to their capability to oxidize a wide range of aromatic contaminants using oxygen from the air. Albeit the numerous laccase-like genes described in ascomycete fungi, ascomycete laccases have been less thoroughly studied than white-rot basidiomycetous laccases. A variety of MCO genes has recently been discovered in plant pathogenic ascomycete fungi, however little is known about the presence and function of laccases in these fungi or their potential use as biocatalysts. We aim here to identify the laccase-type oxidoreductases that might be involved in the decolorization of dyes by Leptosphaerulina sp. and to characterize them as potential biotechnological tools.

Results

A Leptosphaerulina fungal strain, isolated from lignocellulosic material in Colombia, produces laccase as the main ligninolytic oxidoreductase activity during decolorization of synthetic organic dyes. Four laccase-type MCO genes were partially amplified from the genomic DNA using degenerate primers based on laccase-specific signature sequences. The phylogenetic analysis showed the clustering of Lac1, Lac4 and Lac3 with ascomycete laccases, whereas Lac2 grouped with fungal ferroxidases (together with other hypothetical laccases). Lac3, the main laccase produced by Leptosphaerulina sp. in dye decolorizing and laccase-induced cultures (according to the shotgun analysis of both secretomes) was purified and characterized in this study. It is a sensu-stricto laccase able to decolorize synthetic organic dyes with high efficiency particularly in the presence of natural mediator compounds.

Conclusions

The searching for laccase-type MCOs in ascomycetous families where their presence is poorly known, might provide a source of biocatalysts with potential biotechnological interest and shed light on their role in the fungus. The information provided by the use of genomic and proteomic tools must be combined with the biochemical evaluation of the enzyme to prove its catalytic activity and applicability potential.

Electronic supplementary material

The online version of this article (doi:10.1186/s12896-015-0192-2) contains supplementary material, which is available to authorized users.

Analysis of the multicopper oxidase gene regulatory network of Aeromonas hydrophila

Multicopper oxidase (MCO) is an enzyme which involves in reducing the oxygen in a four electron reduction to water with concomitant one electron oxidation of reducing the substrate. We have generated the 3-D structure of MCO by homology modeling and validated on the basis of free energy while 90.4 % amino acid residues present in allowed regions of Ramachandran plot. The screening of potential hazardous aromatic compounds for MCO was performed using molecular docking. We obtained Sulfonaphthal, Thymolphthalein, Bromocresol green and Phloretin derivatives of phenol and aromatic hydrocarbon were efficient substrates for MCO. The phylogeny of MCO reveals that other bacteria restrain the homologous gene of MCO may play an important role in biodegradation of aromatic compounds. We have demonstrated the gene regulatory network of MCO with other cellular proteins which play a key role in gene regulation. These findings provide a new insight for oxidization of phenolic and aromatic compounds using biodegradation process for controlling environmental pollution.

Metallo-oxidase Enzymes: Design of their Active Sites

Multi-copper oxidases are a large family of enzymes prevalent in all three domains of life. They couple the one-electron oxidation of substrate to the four-electron reduction of dioxygen to water and feature at least four Cu atoms, traditionally divided into three sites: T1, T2, and (binuclear) T3. The T1 site catalyzes substrate oxidation while a trinuclear cluster (comprising combined T2 and T3 centres) catalyzes the reduction of dioxygen. Substrate oxidation at the T1 Cu site occurs via an outer-sphere mechanism and consequently substrate specificities are determined primarily by the nature of a substrate docking/oxidation (SDO) site associated with the T1 Cu centre. Many of these enzymes ‘moonlight’, i.e. display broad specificities towards many different substrates and may have multiple cellular functions. A sub-set are robust catalysts for the oxidation of low-valent transition metal ions such as FeII, CuI, and MnII and are termed ‘metallo-oxidases’. They play essential roles in nutrient metal uptake and homeostasis, with the ferroxidase ceruloplasmin being a prominent member. Their SDO sites are tailored to facilitate specific binding and facile oxidation of these low-valent metal ions and this is the focus of this review.

Direct identification of a bacterial manganese(II) oxidase, the multicopper oxidase MnxG, from spores of several different marine Bacillus species

Microorganisms catalyze the formation of naturally occurring Mn oxides, but little is known about the biochemical mechanisms of this important biogeochemical process. We used tandem mass spectrometry to directly analyze the Mn(II)-oxidizing enzyme from marine Bacillus spores, identified as an Mn oxide band with an in-gel activity assay. Nine distinct peptides recovered from the Mn oxide band of two Bacillus species were unique to the multicopper oxidase MnxG, and one peptide was from the small hydrophobic protein MnxF. No other proteins were detected in the Mn oxide band, indicating that MnxG (or a MnxF/G complex) directly catalyzes biogenic Mn oxide formation. The Mn(II) oxidase was partially purified and found to be resistant to many proteases and active even at high concentrations of sodium dodecyl sulfate. Comparative analysis of the genes involved in Mn(II) oxidation from three diverse Bacillus species revealed a complement of conserved Cu-binding regions not present in well-characterized multicopper oxidases. Our results provide the first direct identification of a bacterial enzyme that catalyzes Mn(II) oxidation and suggest that MnxG catalyzes two sequential one-electron oxidations from Mn(II) to Mn(III) and from Mn(III) to Mn(IV), a novel type of reaction for a multicopper oxidase.

The Iron/Lead Transporter Superfamily of Fe3+/Pb2+ Uptake Systems

Oxidase-dependent ferrous iron uptake transporters of the OFeT family and lead uptake transporters of the PbrT family comprise the iron/lead transporter (ILT) superfamily (transporter classification No. 9.A.10). All sequenced homologues of the ILT superfamily were multiply aligned, and conserved motifs, including fully conserved acidic residues in putative transmembrane segments (TMSs) 1 and 4, previously implicated in heavy metal binding, were identified. Topological analyses confirmed the presence of 7 conserved TMSs in a 3 + 3 + 1 arrangement where the two 3 TMS elements are internally repeated. Phylogenetic analyses revealed the presence of several sequence divergent clusters of orthologous proteins that group roughly according to the phylogenes of the organisms of origin. The results serve to characterize and provide evolutionary insight into a novel superfamily of heavy metal uptake transporters.

Specific aspartate residues in FET3 control high-affinity iron transport inSaccharomyces cerevisiae

Site-directed mutagenesis was performed on a set of six aspartate residues of Fet3, the multicopper ferroxidase involved in high-affinity iron transport in Saccharomyces cerevisiae, in order to comprehend the molecular determinants of the protein function. Asp312, Asp315, Asp319 and Asp320 were predicted by homology modelling to be located in a negatively charged surface-exposed loop of the protein. Other two aspartate residues (Asp278 and Asp279) are placed close to the type 1 copper- and iron-binding sites, possibly linking these sites to the negatively charged region. In vivo results showed that mutation of Asp319 and Asp320 to yield D319N and D320N derivatives strongly impairs the ability of the yeast to grow under iron-limiting conditions. In particular, substitution of Asp320 with asparagine essentially abolished the Fet3-dependent iron transport activity. All other mutants (D278Q, D279N, D312N and D315I) behaved essentially as the wild-type protein. The electron paramagnetic resonance spectrum of the soluble forms of D319N and D320N showed significant changes of the copper sites' geometry in D319N but not in D320N. At variance with the membrane-bound forms, soluble D319N and D320N derivatives were highly susceptible to proteolytic degradation, suggesting that replacement of Asp319 or Asp320 locally modifies the structure of Fet3, making the protein sensitive to proteolysis when it is not protected by the membrane environment. In turn, this might be evidence of a shielding role of the permease Ftr1, which could interact with Fet3 at the level of the aspartate-rich negatively charged region.

Targeted suppression of the ferroxidase and iron trafficking activities of the multicopper oxidase Fet3p from Saccharomyces cerevisiae

The Fet3 protein in Saccharomyces cerevisiae is a multicopper oxidase tethered to the outer surface of the yeast plasma membrane. Fet3p catalyzes the oxidation of Fe(2+) to Fe(3+); this ferroxidation reaction is an obligatory first step in high-affinity iron uptake through the permease Ftr1p. Here, kinetic analyses of several Fet3p mutants identify residues that contribute to the specificity that Fet3p has for Fe(2+), one of which is essential also to the coupling of the ferroxidase and uptake processes. The spectral and kinetic properties of the D278A, E185D and A, Y354F and A, and E185A/Y354A mutants of a soluble form of Fet3p showed that all of the mutants exhibited the normal absorbance at 330 nm and 608 nm due to the type 3 and type 1 copper sites in Fet3p, respectively. The EPR spectra of the mutants were also equivalent to wild-type, showing that the type 1 and type 2 Cu(II) sites in the proteins were not perturbed. The only marked kinetic defects measured in vitro were increases in K(M) for Fe(2+) exhibited by the D278A, E185A, Y354A, and E185A/Y354A mutants. These results suggest that these three residues contribute to the ferroxidase specificity site in Fet3p. In vivo analysis of these mutant proteins in their membrane-bound form showed that only E185 mutants exhibited kinetic defects in (59)Fe uptake. For the Fet3p(E185D) mutant, K(M) for iron was 300-fold greater than the wild-type K(M), while Fet3p(E185A) was completely inactive in support of iron uptake. In situ fluorescence demonstrated that all of the mutant Fet3 proteins, in complex with an Ftr1p:YFP fusion protein, were trafficked normally to the plasma membrane. These results suggest that E185 contributes to Fe(2+ )binding to Fet3p and to the subsequent trafficking of the Fe(3+) produced to Ftr1p.

Post-translational modifications of the AFET3 gene product: a component of the iron transport system in budding cells and mycelia of the yeast Arxula adeninivorans

The yeast Arxula adeninivorans is characterized by a temperature-dependent dimorphism. A. adeninivorans grows as budding cells at temperatures up to 42 degrees C, but forms mycelia at higher temperatures. A strong correlation exists between morphological status and iron uptake, achieved by two transport systems that differ in iron affinity. In the presence of high Fe(II) concentrations (>2 microm), budding cells accumulate iron concentrations up to seven-fold higher than those observed in mycelia, while at low Fe(II) concentrations (<2 microm), both cell types accumulate similar amounts of iron. The copper-dependent Fe(II) oxidase Afet3p, composed of 615 amino acids, is a component of the high-affinity iron transport system. This protein shares a high degree of homology with other yeast iron transport proteins, namely Fet3p of Saccharomyces cerevisiae, Cafet3p of Candida albicans and Pfet3p of Pichia pastoris. Expression of the AFET3 gene is found to be strongly dependent on iron concentration but independent of the morphological stage; however, cell morphology was found to influence post-translational modifications of the gene product. O-glycosylation was observed in budding cells only, whereas N-glycosylation occurred in both cell types. The N-glycosylated 103 kDa glycoprotein matures into the 108.5 kDa form, further characterized by serine phosphorylation. Both N-glycosylation and phosphorylation occur at low iron concentrations (< or =5 microm). The mature Afet3p of 108.5 kDa is uniformly distributed within the plasma membrane in cells of both morphological stages.

Genes for multicopper proteins and laccase activity: common features in plant-associatedFusariumisolates

Eight Fusarium isolates from diverse plant habitats produced laccase activities when cultured on low-carbon medium. Three sequences with high homology to laccase genes were detected in the genome of Fusarium proliferatum, NRRL 31071, an opportunistic pathogen of wheat (Triticum spp.). The sequences aligned with laccase genes from Ascomycetes, whereas genes from other fungal taxonomic groups and from plants grouped separately. Sequences for related multicopper oxidases with ascorbate oxidase activity were also separated discretely. A fourth sequence from NRRL 31071 had highest homology to genes for multicopper proteins associated with ferrooxidase activities in yeasts. Each of the four sequences had high homology to sequences within the genome of a ligninolytic F. proliferatum from forest soil. RFLP analysis of the genomes of three other F. proliferatum isolates and a phylogenetically closely related isolate, Fusarium fujikuroi, showed that fragments hybridizing with the four multicopper oxidase genes were similar in size to those from the NRRL 31071 genome. Weaker hybridization was observed with the phylogenetically more distant Fusarium anthophilum. No hybridization was observed with an isolate of Fusarium culmorum, a wheat pathogen, from a different section of the genus Fusarium, although this isolate produced laccases.Key words: ferrooxidase, Fusarium proliferatum, laccase, multicopper oxidase.

Analysis of the human hephaestin gene and protein: comparative modelling of the N-terminus ecto-domain based upon ceruloplasmin

Hephaestin was implicated in mammalian iron homeostasis following its identification as the defective gene in murine sex-linked anaemia. It is a member of the family of copper oxidases that includes mammalian ceruloplasmin, factors V and VIII, yeast fet3 and fet5 and bacterial ascorbate oxidase. Hephaestin is different from ceruloplasmin, a soluble ferroxidase, in having a membrane-spanning region towards the C-terminus. Here we report the gene structure, spanning approximately 100 kb, of the human homologue of mouse hephaestin. The sequence was assembled from the cDNA clones and the chromosome X genomic sequence data available at the Sanger Centre. It has an open reading frame that encodes a protein of 1158 residues, 85% identical with the murine homologue. A model of the N-terminal ecto-domain has been built based on the known three-dimensional structure of human ceruloplasmin. The overall tertiary structure for the hephaestin and the putative residues involved in binding copper and iron appear to be highly conserved between these proteins, which suggests they share the same fold and a conserved function.

Reductive iron uptake by Candida albicans: role of copper, iron and the TUP1 regulator

High-affinity iron uptake by a ferrous permease in the opportunistic pathogen Candida albicans is required for virulence. Here this iron uptake system has been characterized by investigating three distinct activities: an externally directed surface ferric reductase, a membrane-associated PPD (p-phenylenediamine) oxidase and a cellular ferrous iron transport activity. Copper was required for the PPD oxidase and ferrous transport activities. In contrast, copper was not required for iron uptake from siderophores. Addition of iron to the growth medium repressed ferric reductase and ferrous transport, indicating homeostatic regulation. To identify the genes involved, orthologous mutants of Saccharomyces cerevisiae were transformed with a genomic library of C. albicans. CFL95, a gene with sequence similarity to ferric reductases, restored reductase activity to the orthologous S. cerevisiae mutant. CaFTR2 and CaFTR1, genes with homology to ferrous permeases, conferred ferrous transport activity to the orthologous S. cerevisiae mutant. However, neither a genomic library nor CaFET99, a multicopper oxidase homologue and candidate gene for the PPD oxidase, complemented the S. cerevisiae mutant, possibly because of problems with targeting or assembly. Transcripts for CFL95, CaFTR1 and CaFET99 were strongly repressed by iron, whereas the CaFTR2 transcript was induced by iron. Deletion of the TUP1 regulator perturbed the homeostatic control of reductive iron uptake. Incidentally, iron starvation was noted to induce flavin production and this was misregulated in the absence of TUP1 control. The opposite regulation of two iron permease genes and the role of TUP1 indicate that the process of iron acquisition by C. albicans may be more complex and potentially more adaptable than by S. cerevisiae.

Mutational analysis of the iron binding site of Saccharomyces cerevisiae ferroxidase Fet3. An in vivo study

The role of residues predicted to be involved in the binding of iron by the yeast ferroxidase Fet3 has been studied by site-directed mutagenesis. The effect of Fet3 mutations E185A, E185Q, Y354F, D409V and H489D has been investigated in vivo by kinetic analyses of high affinity iron uptake. Our results indicate that Glu-185 is critical for the binding of iron, since substitution of this residue with Ala or Gln strongly affects both growth and the kinetic parameters of high affinity iron uptake, greatly increasing K(m). Mutations Y354F and D409V result in less severe alteration of high affinity iron uptake, while mutant H489D is unable to grow under conditions of iron limitation.

Cloning of Pichia pastoris Fet3: insights into the high affinity iron uptake system

High-affinity iron uptake by yeast cells appears to require the presence of a complex formed on the plasma membrane by the multicopper oxidase Fet3 and the permease Ftr1 which work together to allow iron to enter safely inside the cell. The Pichia pastoris ferroxidase Fet3 has been cloned and it has been found to display high sequence similarity to other yeast multicopper oxidases, including all the predicted ligands for the catalytic copper atoms and for the iron substrate. P. pastoris appears to possess a high-affinity iron uptake system similar to that of S. cerevisiae, as far as regulation of expression is concerned. However, the P. pastoris high-affinity iron uptake system presents a K(m) value for iron almost ten times higher than that of S. cerevisiae, possibly to control iron fluxes over a wider range of concentrations of this metal, in order to avoid toxic iron overloading.

The essential role of Glu-185 and Tyr-354 residues in the ferroxidase activity of Saccharomyces cerevisiae Fet3

The structural determinants required for ferroxidase activity by the yeast multicopper oxidase Fet3 have been partially clarified by site-directed mutagenesis based on homology modeling. Glu-185 and Tyr-354 were substituted with Ala and Phe, respectively. Fet3 E185A retained ca. 5% residual ferroxidase catalytic efficiency, and almost 40% oxidase efficiency. On the other hand, Fet3 Y354F exhibited 50% residual efficiency as a ferroxidase and more than 70% as an oxidase. These results provide new insights in the mechanism of iron binding and oxidation by Fet3, establishing the essential role of Glu-185 and Tyr-354, and allowing to dissect ferroxidase from non-iron oxidase activity.