Quantitative Extrapolation of In Vitro Whole Embryo Culture Embryotoxicity Data to Developmental Toxicity In Vivo Using the Benchmark Dose Approach

Rat Whole Embryo Culture

The direct effects of chemical exposures, environmental extremes, and nutrient quality/quantity have been very difficult to study in mammalian embryos due to their anatomical inaccessibility, paucity of tissue, and other factors that make human studies unethical. Many acute and chronic developmental anomalies can trace their origins to postimplantation phases of gestation, where the organs are first being established and growth and differentiation are in highly active states of flux. Most chemical insults and conditions that produce birth defects are believed to act during this period of organogenesis. The evolution of rodent whole embryo culture (WEC) techniques has provided a valuable experimental model where physiological conditions and exposures can be carefully controlled and manipulated to test hypotheses and explore biochemical and molecular mechanisms of action that would otherwise be extremely difficult. Exposure to chemicals can be controlled through their direct addition to the culture medium. Optimal in vitro culture conditions support the growth of intact, viable conceptuses (embryo and associated extraembryonic membranes) from early egg cylinder stages through the establishment of the neural plate, gastrulation, neural tube closure, onset of active heartbeat and circulation, and the initial formation of all major organ systems that occur prior to the establishment of a functional placenta. Detailed comparisons of in vivo and in vitro growth show that conceptuses grown in WEC are nearly identical, structurally and functionally, to conceptuses of the same developmental stage that are allowed to develop normally in utero during a comparable developmental period. Culture conditions and mechanical apparatuses can be modified to suit a large number of different experimental approaches and paradigms.

In vitro to in vivo extrapolation of effective dosimetry in developmental toxicity testing: Application of a generic PBK modelling approach

Incorporation of kinetics to quantitative in vitro to in vivo extrapolations (QIVIVE) is a key step for the realization of a non-animal testing paradigm, in the sphere of regulatory toxicology. The use of Physiologically-Based Kinetic (PBK) modelling for determining systemic doses of chemicals at the target site is accepted to be an indispensable element for such purposes. Nonetheless, PBK models are usually designed for a single or a group of compounds and are considered demanding, with respect to experimental data needed for model parameterization. Alternatively, we evaluate here the use of a more generic approach, i.e. the so-called IndusChemFate model, which is based on incorporated QSAR model parametrization. The model was used to simulate the in vivo kinetics of three diverse classes of developmental toxicants: triazoles, glycol ethers' alkoxyacetic acid metabolites and phthalate primary metabolites. The model required specific input per each class of compounds. These compounds were previously tested in three alternative assays: the whole-embryo culture (WEC), the zebrafish embryo test (ZET), and the mouse embryonic stem cell test (EST). Thereafter, the PBK-simulated blood levels at toxic in vivo doses were compared to the respective in vitro effective concentrations. Comparisons pertaining to relative potency and potency ranking with integration of kinetics were similar to previously obtained comparisons. Additionally, all three in vitro systems produced quite comparable results, and hence, a combination of alternative tests is still preferable for predicting the endpoint of developmental toxicity in vivo. This approach is put forward as biologically more plausible since plasma concentrations, rather than external administered doses, constitute the most direct in vivo dose metric.

Correlation of In Vivo Versus In Vitro Benchmark Doses (BMDs) Derived From Micronucleus Test Data: A Proof of Concept Study

In this study, we explored the applicability of using in vitro micronucleus (MN) data from human lymphoblastoid TK6 cells to derive in vivo genotoxicity potency information. Nineteen chemicals covering a broad spectrum of genotoxic modes of action were tested in an in vitro MN test using TK6 cells using the same study protocol. Several of these chemicals were considered to need metabolic activation, and these were administered in the presence of S9. The Benchmark dose (BMD) approach was applied using the dose-response modeling program PROAST to estimate the genotoxic potency from the in vitro data. The resulting in vitro BMDs were compared with previously derived BMDs from in vivo MN and carcinogenicity studies. A proportional correlation was observed between the BMDs from the in vitro MN and the BMDs from the in vivo MN assays. Further, a clear correlation was found between the BMDs from in vitro MN and the associated BMDs for malignant tumors. Although these results are based on only 19 compounds, they show that genotoxicity potencies estimated from in vitro tests may result in useful information regarding in vivo genotoxic potency, as well as expected cancer potency. Extension of the number of compounds and further investigation of metabolic activation (S9) and of other toxicokinetic factors would be needed to validate our initial conclusions. However, this initial work suggests that this approach could be used for in vitro to in vivo extrapolations which would support the reduction of animals used in research (3Rs: replacement, reduction, and refinement).

Big data in chemical toxicity research: the use of high-throughput screening assays to identify potential toxicants

High-throughput screening (HTS) assays that measure the in vitro toxicity of environmental compounds have been widely applied as an alternative to in vivo animal tests of chemical toxicity. Current HTS studies provide the community with rich toxicology information that has the potential to be integrated into toxicity research. The available in vitro toxicity data is updated daily in structured formats (e.g., deposited into PubChem and other data-sharing web portals) or in an unstructured way (papers, laboratory reports, toxicity Web site updates, etc.). The information derived from the current toxicity data is so large and complex that it becomes difficult to process using available database management tools or traditional data processing applications. For this reason, it is necessary to develop a big data approach when conducting modern chemical toxicity research. In vitro data for a compound, obtained from meaningful bioassays, can be viewed as a response profile that gives detailed information about the compound's ability to affect relevant biological proteins/receptors. This information is critical for the evaluation of complex bioactivities (e.g., animal toxicities) and grows rapidly as big data in toxicology communities. This review focuses mainly on the existing structured in vitro data (e.g., PubChem data sets) as response profiles for compounds of environmental interest (e.g., potential human/animal toxicants). Potential modeling and mining tools to use the current big data pool in chemical toxicity research are also described.

Understanding receptor-mediated effects in rainbow trout: in vitro-in vivo extrapolation using physiologically based toxicokinetic models

The European REACH regulation requires the use of animal experimentation to assess the risk of industrial chemicals. However, the 3R principle (reduction, replacement, refinement) demands the use of suitable alternative test methods. Many dossiers submitted for the authorization of chemicals have attempted to provide the required data without performing new experiments, relying heavily on in silico methods; in vitro assays were scarcely used. We propose a methodology that uses physiologically based toxicokinetic (PBTK) models to extrapolate in vitro data to the in vivo level. We collected experimental results for in vitro and in vivo ethoxyresorufin-O-deethylase and vitellogenin induction following chemical exposure and compared those results with model predictions. We found that the predictive power of aqueous chemical concentrations was limited; median effect concentrations (EC50s) based on internal concentrations in fish correlated better with in vitro EC50s. Our data show that in vitro assays could offer a substitute for fish studies when combined with PBTK models.

Disposition of glycolic acid into rat and rabbit embryos in vitro

High dose gavage administration of ethylene glycol (EG) induces teratogenicity in rodents, but not in rabbits, resulting from saturation of intermediate EG metabolism and glycolic acid (GA) accumulation. In vivo, rat embryos sequester GA 2-4-fold higher than maternal blood, a phenomenon absent in rabbits and proposed not to occur in humans. This research explored the mechanisms of GA disposition into rat and rabbit conceptuses using whole embryo culture (WEC). Rat and rabbit embryos concentrated GA from the culture medium. In vitro to in vivo discordance in the rabbit plausibly stemmed from anatomical differences between these models. GA sequestration was attenuated at 4°C in both species. Rat embryos further demonstrated pH-dependence of GA sequestration and inhibition by D-lactic acid. These data suggest GA disposition into rat and rabbit embryos is energy- and pH-dependent, and carrier-mediated. Anatomical and maternal-to-conceptal pH gradient differences likely underlie the lack of enhanced GA disposition in non-rodent species.

Shape and steepness of toxicological dose-response relationships of continuous endpoints

A re-analysis of a large number of historical dose-response data for continuous endpoints indicates that an exponential or a Hill model with four parameters adequately describes toxicological dose-responses. No exceptions were found for the datasets considered, which related to a wide variety of endpoints and to both in vivo and in vitro studies of various types. For a given endpoint/study type dose-response shapes were found to be homogenous among chemicals in the in vitro studies considered, while a mild among-chemical variation in the steepness parameter seemed to be present in the in vivo studies. Our findings have various practical consequences. For continuous endpoints, model selection in the BMD approach is not a crucial issue. The often applied approach of using constraints on the model parameters to prevent "infinite" slopes at dose zero in fitting a model is not in line with our findings, and appears to be unjustified. Instead, more realistic ranges of parameter values could be derived from re-analyses of large numbers of historical dose-response datasets in the same endpoint and study type, which could be used as parameter constraints in future individual datasets. This approach will be particularly useful for weak datasets (e.g. few doses, much scatter). In addition, this approach may open the way to use fewer animals in future studies. In the discussion, we argue that distinctions between linear, sub/supralinear or thresholded dose-response shapes, based on visual inspection of plots, are not biologically meaningful nor useful for risk assessment.

Estimation of benchmark dose for micronucleus occurrence in Chinese vinyl chloride-exposed workers

In this study, we estimated the possibility of using benchmark dose (BMD) to assess the dose-response relationship between vinyl chloride monomer (VCM) exposure and chromosome damage. A group of 317 workers occupationally exposed to vinyl chloride monomer and 166 normal, unexposed control in Shandong Province northern China were examined for chromosomal damage in peripheral blood lymphocytes (PBL) using the cytokinesis-blocked micronucleus (CB-MN) assay of DNA damage. The exposed group (3.47 ± 2.65)‰ showed higher micronucleus frequency than the control (1.60 ± 1.30)‰ (P < 0.01). Occupational exposure level based on micronucleus occurrence in all individuals was analyzed with benchmark dose (BMD) methods. The benchmark dose lower limit of a one-sided 95% confidence interval (BMDL) for 10% excess risk was also determined. Results showed a dose-response relationship between cumulative exposure and MN frequency, and a BMDL of 0.54 mg/m3 and 0.23 mg/m3 for males and females, respectively. Female workers were more susceptible to MN damage than male workers.

From QSAR to QSIIR: searching for enhanced computational toxicology models

Quantitative structure activity relationship (QSAR) is the most frequently used modeling approach to explore the dependency of biological, toxicological, or other types of activities/properties of chemicals on their molecular features. In the past two decades, QSAR modeling has been used extensively in drug discovery process. However, the predictive models resulted from QSAR studies have limited use for chemical risk assessment, especially for animal and human toxicity evaluations, due to the low predictivity of new compounds. To develop enhanced toxicity models with independently validated external prediction power, novel modeling protocols were pursued by computational toxicologists based on rapidly increasing toxicity testing data in recent years. This chapter reviews the recent effort in our laboratory to incorporate the biological testing results as descriptors in the toxicity modeling process. This effort extended the concept of QSAR to quantitative structure in vitro-in vivo relationship (QSIIR). The QSIIR study examples provided in this chapter indicate that the QSIIR models that based on the hybrid (biological and chemical) descriptors are indeed superior to the conventional QSAR models that only based on chemical descriptors for several animal toxicity endpoints. We believe that the applications introduced in this review will be of interest and value to researchers working in the field of computational drug discovery and environmental chemical risk assessment.

Functionalization density dependent toxicity of oxidized multiwalled carbon nanotubes in a murine macrophage cell line

The present study investigates the effect of functionalization density on the toxicity and cellular uptake of oxidized multiwalled carbon nanotubes (f-MWCNTs) in vitro. The toxicity of f-MWCNTs at varying degrees of carboxylation was assessed in a murine macrophage RAW 264.7 cell line, a model for liver Kupffer cells. In vitro cytotoxicity of oxidized MWCNTs was directly proportional to their functionalization density. The increased cytotoxicity was associated with a concurrent increase in the number of apoptotic cells and production of reactive nitrogen species (RNS). In contrast, reactive oxygen species (ROS) generation was the highest in the case of pristine MWCNTs and decreased with increased functionalization density. Quantitative cellular uptake studies indicated that endogenous ROS production was independent of the concentration of CNTs internalized by a specific cell population and was directly proportional to their surface hydrophobicity. Mechanistic studies suggested that cellular uptake of CNTs was critically charge-dependent and mediated through scavenger receptors, albeit the involvement of nonscavenger receptor mechanisms at low CNT concentrations and their saturation at the experimental concentration cannot be ruled out. A mathematical model was established to correlate between the cellular uptake of CNTs with their length and zeta potential. In an attempt to correlate the results of in vitro toxicity experiments with those of the in vivo toxicity in the mouse model, we found that the toxicity trends in vitro and in vivo are rather opposing. The apparent anomaly was explained on the basis of different experimental conditions and doses associated with cells under in vivo and in vitro culture conditions.

Estimation of a safe level for occupational exposure to vinyl chloride using a benchmark dose method in central China

OBJECTIVES

The aim of this study was to estimate a benchmark dose (BMD) for chromosome damage induced by vinyl chloride monomer (VCM) in VCM-exposed workers in central China and validate the published results in Shanghai.

METHODS

VCM-exposed workers who had been exposed to VCM for at least one year (n=463) and matched subjects not exposed to VCM or other toxins (n=273) were asked to participate in this study. Micronucleus (MN) frequency based on the cytokinesis-block micronucleus assay (CBMN) was used as a biomarker for chromosome damage induced by VCM exposure.

RESULTS

The MN frequency in the VCM-exposed workers was significantly higher than that in the control group, and multivariate Poisson regression suggested that gender, smoking status and VCM exposure were the significant factors influencing the risk of increased MN frequency. When subjects were further stratified according to gender and smoking status, the results showed that female VCM-exposed workers were more susceptible than the males to the risk of increased MN frequency. The MN frequency of smokers was significantly higher than that of nonsmokers in the control group. Our study also suggested that there was a strong dose-response relationship between VCM CED and the increased risk of MN frequency in the total group, males and females. The BMDL(10) was found to be 630.6, 670.2 and 273.7 mg-year for all VCM-exposed workers, males and females, respectively.

CONCLUSIONS

These results invite further scrutiny of the current VCM occupational exposure limits and warrant further study of the risk of VCM genotoxicity and carcinogenicity.

Review of current and "omics" methods for assessing the toxicity (genotoxicity, teratogenicity and nephrotoxicity) of herbal medicines and mushrooms

ETHNOPHARMACOLOGICAL RELEVANCE

The increasing use of traditional herbal medicines around the world requires more scientific evidence for their putative harmlessness. To this end, a plethora of methods exist, more or less satisfying. In this post-genome era, recent reviews are however scarce, not only on the use of new "omics" methods (transcriptomics, proteomics, metabonomics) for genotoxicity, teratogenicity, and nephrotoxicity assessment, but also on conventional ones.

METHODS

The present work aims (i) to review conventional methods used to assess genotoxicity, teratogenicity and nephrotoxicity of medicinal plants and mushrooms; (ii) to report recent progress in the use of "omics" technologies in this field; (iii) to underline advantages and limitations of promising methods; and lastly (iv) to suggest ways whereby the genotoxicity, teratogenicity, and nephrotoxicity assessment of traditional herbal medicines could be more predictive.

RESULTS

Literature and safety reports show that structural alerts, in silico and classical in vitro and in vivo predictive methods are often used. The current trend to develop "omics" technologies to assess genotoxicity, teratogenicity and nephrotoxicity is promising but most often relies on methods that are still not standardized and validated.

CONCLUSION

Hence, it is critical that toxicologists in industry, regulatory agencies and academic institutions develop a consensus, based on rigorous methods, about the reliability and interpretation of endpoints. It will also be important to regulate the integration of conventional methods for toxicity assessments with new "omics" technologies.

Recent trends in statistical QSAR modeling of environmental chemical toxicity

Quantitative cheminformatics approaches such as QSAR modeling find growing applications in chemical risk assessment. Traditional methods rely on the use of calculated chemical descriptors of molecules and relatively small training sets. However, in recent years, there is a trend toward the increased use of in vitro biological testing approaches to reduce both the length of experimental studies and the animal use for chemical risk assessment. Furthermore, there is also much greater emphasis on model validation using external datasets to enable the reliable use of computational models as part of regulatory decision making. In this chapter, recent trends emphasizing the need for both careful curation of experimental data prior to model development and rigorous model validation are investigated. Furthermore, recent approaches to chemical toxicity prediction that employ both chemical descriptors and in vitro screening data for developing novel hybrid chemical/biological models are being reviewed. Examples of respective application studies that employ novel workflows for model developments are described and recent important efforts by several academic, nonprofit, and industrial groups to start placing both data and, especially, models in the public domain are discussed.

Genotoxicity in vinyl chloride-exposed workers and its implication for occupational exposure limit

BACKGROUND

Vinyl chloride monomer (VCM) is a colorless gas under room temperature and has been mostly used to produce polyvinyl chloride (PVC) since the 1970s. It is classified by the International Agency of Research on Cancer (IARC) as a known human carcinogen (Group 1). In this study, genetic damage in VCM workers was evaluated in relation to their occupational cumulative exposure to VCM.

METHODS

Cytokinesis-block micronucleus assay was conducted in 229 VCM workers and 138 controls to detect chromosome damage in peripheral blood lymphocytes. The cumulative exposure dose (CED) of VCM was calculated based on the job type and duration of each worker and the workplace VCM concentration. Dose-response relationships between VCM CED and micronucleus frequency or chromosomal damage were evaluated, and benchmark doses (BMDs) estimated.

RESULTS

Dose-response relationships between VCM CED and chromosomal damage were obtained. The 95% lower confidence bound of BMD of VCM CED was 2.86 mg/m(3) -year for both genders combined, leading to an estimated exposure limit of 0.072 mg/m(3) assuming a work life of 40 years.

CONCLUSIONS

VCM exposure may induce chromosomal damage at occupational exposure levels below the Chinese national occupational health standard. Further research is needed to better understand micronuclei as biomarker of VCM genotoxicity. Better dose-response assessment and BMD estimation are desirable in order to improve the quantification of occupational exposure limits for VCM with respect to non-cancer risk.

Comparison of the mouse Embryonic Stem cell Test, the rat Whole Embryo Culture and the Zebrafish Embryotoxicity Test as alternative methods for developmental toxicity testing of six 1,2,4-triazoles

The relatively high experimental animal use in developmental toxicity testing has stimulated the search for alternatives that are less animal intensive. Three widely studied alternative assays are the mouse Embryonic Stem cell Test (EST), the Zebrafish Embryotoxicity Test (ZET) and the rat postimplantation Whole Embryo Culture (WEC). The goal of this study was to determine their efficacy in assessing the relative developmental toxicity of six 1,2,4-triazole compounds,(1) flusilazole, hexaconazole, cyproconazole, triadimefon, myclobutanil and triticonazole. For this purpose, we analyzed effects and relative potencies of the compounds in and among the alternative assays and compared the findings to their known in vivo developmental toxicity. Triazoles are antifungal agents used in agriculture and medicine, some of which are known to induce craniofacial and limb abnormalities in rodents. The WEC showed a general pattern of teratogenic effects, typical of exposure to triazoles, mainly consisting of reduction and fusion of the first and second branchial arches, which are in accordance with the craniofacial malformations reported after in vivo exposure. In the EST all triazole compounds inhibited cardiomyocyte differentiation concentration-dependently. Overall, the ZET gave the best correlation with the relative in vivo developmental toxicities of the tested compounds, closely followed by the EST. The relative potencies observed in the WEC showed the lowest correlation with the in vivo developmental toxicity data. These differences in the efficacy between the test systems might be due to differences in compound kinetics, in developmental stages represented and in the relative complexity of the alternative assays.

L-cysteine, N-acetyl-L-cysteine, and glutathione protect Xenopus laevis embryos against acrylamide-induced malformations and mortality in the frog embryo teratogenesis assay

Dietary acrylamide is largely derived from heat-induced reactions between the amino group of the free amino acid asparagine and carbonyl groups of glucose and fructose during heat processing (baking, frying) of plant-derived foods such as potato fries and cereals. After consumption, acrylamide is absorbed into the circulation and is then distributed to various organs, where it can react with DNA, neurons, hemoglobin, and essential enzymes. In the present study, we explored the potential of L-cysteine (CySH), N-acetyl-L-cysteine (NAC), reduced glutathione (GSH), and the amino acid glycine (Gly) to protect frog embryos against acrylamide-induced developmental toxicity in the frog embryo teratogenesis assay - Xenopus (FETAX). To test the antiteratogenic potential, based on concentration-response study ranging from 0.07 to 4.22 mM acrylamide in FETAX solution (pH 8.1), we selected concentrations of acrylamide that induced 100% malformations and mortality. At the end of 96 h, we counted survivors and malformed embryos and measured embryo length. The data show that CySH, NAC, and GSH protected the embryos against acrylamide induced malformations and mortality to different degrees. CySH and GSH protected the embryos against both malformations and mortality, whereas NAC protected only against mortality. Gly had no protective effect. Possible mechanisms of the protective effects and the dietary significance of the results of this and related studies for food safety and human health are discussed.

High-throughput screening for analysis of in vitro toxicity

The influence of combinatorial chemistry and high-throughput screening (HTS) technologies in the pharmaceutical industry during the last 10 years has been enormous. However, the attrition rate of drugs in the clinic due to toxicity during this period still remained 40-50%. The need for reduced toxicity failure led to the development of early toxicity screening assays. This chapter describes the state of the art for assays in the area of genotoxicity, cytotoxicity, carcinogenicity, induction of specific enzymes from phase I and II metabolism, competition assays for enzymes of phase I and II metabolism, embryotoxicity as well as endocrine disruption and reprotoxicity. With respect to genotoxicity, the full Ames, Ames II, Vitotox, GreenScreen GC, RadarScreen, and non-genotoxic carcinogenicity assays are discussed. For cytotoxicity, cellular proliferation, calcein uptake, oxygen consumption, mitochondrial activity, radical formation, glutathione depletion as well as apoptosis are described. For high-content screening (HCS), the possibilities for analysis of cytotoxicity, micronuclei, centrosome formation and phospholipidosis are examined. For embryotoxicity, endocrine disruption and reprotoxicity alternative assays are reviewed for fast track analysis by means of nuclear receptors and membrane receptors. Moreover, solutions for analyzing enzyme induction by activation of nuclear receptors, like AhR, CAR, PXR, PPAR, FXR, LXR, TR and RAR are given.

Use of the rat postimplantation embryo culture to assess the embryotoxic potency within a chemical category and to identify toxic metabolites

The implementation of in vitro alternatives in the safety evaluation of chemicals in the animal intensive area of reproductive toxicity testing is highly desirable, but has been limited by issues around predictivity and applicability domains. The validation of alternatives may gain from a category approach, in which, rather than validating a test for the universe of chemicals, its predictive value is assessed for each class of chemicals for which the test represents relevant end point(s). We studied the embryotoxicity in rodent postimplantation whole embryo culture (WEC) of a series of phthalates and their metabolites. Phthalate diesters are widely applied industrial chemicals, their monoester derivatives being considered as their embryotoxic metabolites. The relative in vitro potency of three out of four monophthalates was found to mimick that of corresponding diphthalates tested in vivo. The phthalate that deviated from this ranking, monoethylhexylphthalate (MEHP), showed a relatively high in vitro toxicity as compared to in vivo data. This deviation could be explained through kinetic differences among phthalates, as shown between MEHP and monobutylphthalate. In addition, in vitro testing of specific secondary MEHP metabolites showed that they were all less potent than MEHP. This finding confirmed that MEHP in vitro embryotoxicity is most likely the best correlate to DEHP in vivo embryotoxicity. This study shows that a category approach in the assessment of the validation of in vitro alternatives is feasible, and can be improved when kinetic considerations are taken into account.

Evaluation of the embryotoxic potency of compounds in a newly revised high throughput embryonic stem cell test

The ability of murine-derived embryonic stem cells (D3) to differentiate into cardiomyocytes is the basis of the embryonic stem cell test (EST). With the EST, chemicals and pharmaceuticals can be assessed for their embryotoxic potency early on in the development process. In order to come to a higher throughput EST, a 96-well based method was developed based on low attachment well plates that allow for the formation of embryonic bodies from which the stem cells can differentiate. Twelve test compounds were selected based on their reported in vitro and in vivo embryotoxic potency. In the 96-well based EST, reportedly strong embryotoxic compounds 5-fluorouracil, 6-aminonicotinamide (6AN), methylmercury chloride, and hydroxyurea were correctly ranked with corresponding Relative Embryotoxic Potency values (REP, based on the EC(50) (microM) value of 6AN) of 2.6 +/- 2.9, 1, 2.0 +/- 3.1, and 0.07 +/- 0.05, respectively. Moderately embryotoxic compounds valproic acid, boric acid, methoxyacetic acid, and lithium chloride resulted in a correct ranking with REP values of 0.01 +/- 0.003, 0.001 +/- 0.001, 0.0007 +/- 0.001, and 0.0006 +/- 0.0004, respectively. The included nonembryotoxic compounds Penicillin G, acrylamide, and saccharin did not result in an inhibition of D3 cells to differentiate into cardiomyocytes, other than related to cytotoxicity (REP value of 0.00001). However, diphenhydramine resulted in an inhibitory effect similarly to the strong embryotoxic compound hydroxyurea, with a REP value of 0.40 +/- 0.36. However, further evaluation suggested this was due to direct inhibition of the contractile capacity of the D3 cardiomyocytes, rather than an embryotoxic mechanism. The 96-well based EST is a promising addition to the screening process of newly developed chemicals and pharmaceuticals.

A retrospective analysis of developmental toxicity studies in rat and rabbit: what is the added value of the rabbit as an additional test species?

In contrast to most toxicological tests, developmental studies are usually required in both a rodent and a non-rodent species. This study retrospectively assessed the added value of the rabbit developmental test when a rat developmental test is available. In contrast with previous reviews, we looked at developmental toxicity instead of teratogenicity, and took into account maternal toxicity in the evaluation of developmental toxicity. We analyzed data for 54 substances classified for developmental toxicity and 73 substances considered to be teratogenic in the rabbit and not in the rat in two previous reviews. On average, the rat and the rabbit developmental toxicity studies were similarly sensitive: the average ratio of the NOAELs between the two species was about one, and for most compounds there were no differences between rat and rabbit studies in terms of classification for developmental toxicity. For certain substances the developmental study in either one of the two species appeared to be more sensitive than in the other species. However, these differences are partly due to differences between studies other than the test species used. Overall, our analysis does not clearly indicate that the evaluation of developmental toxicity, as opposed to other types of toxicity, would specifically require the rabbit as an additional test species. The discrimination between direct and indirect (i.e., as a consequence of maternal toxicity) developmental effects was often doubtful, and is one of the factors that could explain the apparent differences between the two species. A more accurate assessment of maternal toxicity might improve the reliability of the results from a single developmental toxicity study. More knowledge about the interaction between maternal and developmental effects is required before decisions on omitting the requirement for the developmental toxicity testing in a second species can be considered.