Microfabrication of an analog of the basal lamina: biocompatible membranes with complex topographies

Fabrication of Porous Collagen Scaffolds Containing Embedded Channels with Collagen Membrane Linings

Tissues and organs contain an extracellular matrix (ECM). In the case of blood vessels, endothelium cells are anchored to a specialized basement membrane (BM) embedded inside the interstitial matrix (IM). We introduce a multi-structural collagen-based scaffold with embedded microchannels that mimics in vivo structures within vessels. Our scaffold consists of two parts, each containing two collagen layers, i.e., a 3D porous collagen layer analogous to IM lined with a thin 2D collagen film resembling the BM. Enclosed microchannels were fabricated using contact microprinting. Microchannel test structures with different sizes ranging from 300 to 800 µm were examined for their fabrication reproducibility. The heights and perimeters of the fabricated microchannels were ~20% less than their corresponding values in the replication PDMS mold; however, microchannel widths were significantly closer to their replica dimensions. The stiffness, permeability, and pore size properties of the 2D and 3D collagen layers were measured. The permeability of the 2D collagen film was negligible, making it suitable for mimicking the BM of large blood vessels. A leakage test at various volumetric flow rates applied to the microchannels showed no discharge, thereby verifying the reliability of the proposed integrated 2D/3D collagen parts and the contact printing method used for bonding them in the scaffold. In the future, multi-cell culturing will be performed within the 3D porous collagen and against the 2D membrane inside the microchannel, hence preparing this scaffold for studying a variety of blood vessel-tissue interfaces. Also, thicker collagen scaffold tissues will be fabricated by stacking several layers of the proposed scaffold.

Precision nephrotoxicity testing using 3D in vitro models

Nephrotoxicity is a significant concern during the development of new drugs or when assessing the safety of chemicals in consumer products. Traditional methods for testing nephrotoxicity involve animal models or 2D in vitro cell cultures, the latter of which lack the complexity and functionality of the human kidney. 3D in vitro models are created by culturing human primary kidney cells derived from urine in a 3D microenvironment that mimics the fluid shear stresses of the kidney. Thus, 3D in vitro models provide more accurate and reliable predictions of human nephrotoxicity compared to existing 2D models. In this review, we focus on precision nephrotoxicity testing using 3D in vitro models with human autologous urine-derived kidney cells as a promising approach for evaluating drug safety.

The adhesive heterogeneity of different compartments of oral mucosal rete ridges

Rete ridges play a critical role in maintaining epidermal structure and mechanical properties. Notably, rete ridges can be divided into three compartments: the base, slope and tip. The present study aims to explore whether these three compartments have distinct adhesive functions. We collected 28 normal masticatory mucosae to prepare paraffin-embedded sections. Immunohistochemistry and immunofluorescent staining were used to analyse the expression pattern of integrin α6 and β4 in different compartments of the rete ridges. To observe whether the different compartments had distinct adhesive forces, dermal-epidermal junction separation experiments were performed by peeling the oral epithelium from the lamina propria after treatment with cold saline for 72 h. The results showed that integrin α6 and β4 prefer the basal layer keratinocytes closely adjacent to the base compartment of the rete ridges. The oral mucosal epithelium separated from the underlying lamina propria at the tip of rete ridges when they were peeled after the cold saline treatment. In conclusion, the adhesive force of the basal layer keratinocytes at the base of the rete ridges is stronger than at the tip.

Podosome formation in the murine palatal mucosae: Its proteolytic role in rete peg formation

BACKGROUND

Basement membrane remodeling is an indispensable factor for oral mucosal rete peg formation, but how the basement membrane is remodeled remains unclear. Our previous study indicated that keratinocyte growth factor induces the assembly of podosomes, which are dynamic organelles critical for matrix remodeling in human immortalized oral epithelial cells. This study explores podosome formation and its role in basement membrane remodeling during murine oral mucosal rete peg formation.

METHODS

Perinatal murine palatal tissue slices were obtained from embryonic day 17.5 (E 17.5) to postnatal day 10.5 (P 10.5) BALB/c mice. Rete peg formation was observed by hematoxylin and eosin (HE) staining. Proteolysis of the basement membrane was detected by immunofluorescence staining. The assembly of podosomes and their correlation with basement membrane proteolysis were investigated by laser scanning confocal microscopy.

RESULTS

The shape of basal layer keratinocytes at the sites of emerging rete pegs changed from typically polygonal to spindle-shaped. Basement membrane proteolysis, indicated by decreased type IV collagen (Col IV) staining, was detected during rete peg formation. Classical markers for podosomes, including cortactin/Tks5, WASP, and matrix metalloproteinase foci, were easily observed at the spindle-shaped cells. Podosomes were visible in regions where there was a significant decrease in Col IV staining.

CONCLUSIONS

These observations indicated that podosomes form at the front of the emerging rete peg and may play a pivotal role in basement membrane remodeling during rete peg formation.

The Human Epidermal Basement Membrane: A Shaped and Cell Instructive Platform That Aging Slowly Alters

One of the most important functions of skin is to act as a protective barrier. To fulfill this role, the structural integrity of the skin depends on the dermal-epidermal junction-a complex network of extracellular matrix macromolecules that connect the outer epidermal layer to the underlying dermis. This junction provides both a structural support to keratinocytes and a specific niche that mediates signals influencing their behavior. It displays a distinctive microarchitecture characterized by an undulating pattern, strengthening dermal-epidermal connectivity and crosstalk. The optimal stiffness arising from the overall molecular organization, together with characteristic anchoring complexes, keeps the dermis and epidermis layers extremely well connected and capable of proper epidermal renewal and regeneration. Due to intrinsic and extrinsic factors, a large number of structural and biological changes accompany skin aging. These changes progressively weaken the dermal-epidermal junction substructure and affect its functions, contributing to the gradual decline in overall skin physiology. Most changes involve reduced turnover or altered enzymatic or non-enzymatic post-translational modifications, compromising the mechanical properties of matrix components and cells. This review combines recent and older data on organization of the dermal-epidermal junction, its mechanical properties and role in mechanotransduction, its involvement in regeneration, and its fate during the aging process.

Fractional CO2 laser micropatterning of cell-seeded electrospun collagen scaffolds enables rete ridge formation in 3D engineered skin

Rete ridges are interdigitations of the epidermis and dermis of the skin that play multiple roles in homeostasis, including enhancing adhesion via increased contact area and acting as niches for epidermal stem cells. These structures, however, are generally absent from engineered skin (ES). To develop ES with rete ridges, human fibroblast-seeded dermal templates were treated with a fractional CO₂ laser, creating consistently spaced wells at the surface. Constructs with and without laser treatment were seeded with keratinocytes, cultured for 10 days, and grafted onto athymic mice for four weeks. Rete-ridge like structures were observed in the laser-patterned (ridged) samples at the time of grafting and were maintained in vivo. Ridged grafts displayed improved barrier function over non-lasered (flat) grafts at the time of grafting and 4 weeks post-grafting. Presence of ridges in vivo corresponded with increased keratinocyte proliferation, epidermal area, and basement membrane length. These results suggest that this method can be utilized to develop engineered skin grafts with rete ridges, that the ridge pattern is stable for at least 4 weeks post-grafting, and that the presence of these ridges enhances epidermal proliferation and establishment of barrier function. STATEMENT OF SIGNIFICANCE: Rete ridges play a role in epidermal homeostasis, enhance epidermal-dermal adhesion and act as niches for epidermal stem cells. Despite their role in skin function, these structures are not directly engineered into synthetic skin. A new method to rapidly and reproducibly generate rete ridges in engineered skin was developed using fractional CO₂ laser ablation. The resulting engineered rete ridges aided in the establishment of epidermal barrier function, basement membrane protein deposition and epidermal regeneration. This new model of engineered skin with rete ridges could be utilized as an in vitro system to study epidermal stem cells, a testbed for pharmaceutical evaluation or translated for clinical use in full-thickness wound repair.

Tissue engineering; strategies, tissues, and biomaterials

Current tissue regenerative strategies rely mainly on tissue repair by transplantation of the synthetic/natural implants. However, limitations of the existing strategies have increased the demand for tissue engineering approaches. Appropriate cell source, effective cell modification, and proper supportive matrices are three bases of tissue engineering. Selection of appropriate methods for cell stimulation, scaffold synthesis, and tissue transplantation play a definitive role in successful tissue engineering. Although the variety of the players are available, but proper combination and functional synergism determine the practical efficacy. Hence, in this review, a comprehensive view of tissue engineering and its different aspects are investigated.

Preparation of micro/nanopatterned gelatins crosslinked with genipin for biocompatible dental implants

Background: Collagen is a basic component of the periodontium and plays an important role in the function of the periodontal unit. Therefore, coating with collagen/gelatin has been applied to enable dental implants to positively interact with peri-implant tissues. Although the micro/nanoscale topography is an important property of the surface of dental implants, smaller collagen/gelatin surface patterns have not been sufficiently developed. Furthermore, only few reports on the behavior of cells on gelatin surfaces with different patterns and sizes exist. In this study, we developed micro/nanometer-scaled gelatin surfaces using genipin crosslinking, with the aim of understanding the use of patterning in surface modification of dental implants. Results: Grooves, holes, and pillars, with widths or diameters of 2 µm, 1 µm, or 500 nm were fabricated using a combination of molding and genipin crosslinking of gelatin. The stability of the different gelatin patterns could be controlled by the degree of genipin crosslinking. The gelatin patterns at 20 mM concentration of genipin and 41% crosslinking maintained a stable, patterned shape for at least 14 days in a cell culture medium. A cell morphology study showed that the cells on groves were aligned along the direction of the grooves. In contrast, the cells on pillars and holes exhibited randomly elongated filopodia. The vinculin spots of the cells were observed on the top of ridges and pillars or the upper surface of holes. The results of a cell attachment assay showed that the number of surface-attached cells increased with increasing patterning of the gelatin surface. Unlike the cell attachment assay, the results of a cell proliferation assay showed that Saos-2 cells prefer grooves with diameters of approximately 2 µm and 1 µm and pillars with diameters of 1 µm and heights of 500 nm. The number of cells on pillars with heights of 2 µm was larger than those of the other gelatin surface patterns tested. Conclusion: These data support that a detailed design of the gelatin surface pattern can control both cell attachment and proliferation of Saos-2 cells. Thus, gelatin surfaces patterned using genipin crosslinking are now an available option for biocompatible material patterning.

Engineered Microenvironments to Direct Epidermal Stem Cell Behavior at Single-Cell Resolution

Mammalian epidermis is maintained through proliferation of stem cells and differentiation of their progeny. The balance between self-renewal and differentiation is controlled by a variety of interacting intrinsic and extrinsic factors. Although the nature of these interactions is complex, they can be modeled in a reductionist fashion by capturing single epidermal stem cells on micropatterned substrates and exposing them to individual stimuli, alone or in combination, over defined time points. These studies have shown that different extrinsic stimuli trigger a common outcome-initiation of terminal differentiation-by activating different signaling pathways and eliciting different transcriptional responses.

The Horizon of Materiobiology: A Perspective on Material-Guided Cell Behaviors and Tissue Engineering

Although the biological functions of cell and tissue can be regulated by biochemical factors (e.g., growth factors, hormones), the biophysical effects of materials on the regulation of biological activity are receiving more attention. In this Review, we systematically summarize the recent progress on how biomaterials with controllable properties (e.g., compositional/degradable dynamics, mechanical properties, 2D topography, and 3D geometry) can regulate cell behaviors (e.g., cell adhesion, spreading, proliferation, cell alignment, and the differentiation or self-maintenance of stem cells) and tissue/organ functions. How the biophysical features of materials influence tissue/organ regeneration have been elucidated. Current challenges and a perspective on the development of novel materials that can modulate specific biological functions are discussed. The interdependent relationship between biomaterials and biology leads us to propose the concept of "materiobiology", which is a scientific discipline that studies the biological effects of the properties of biomaterials on biological functions at cell, tissue, organ, and the whole organism levels. This Review highlights that it is more important to develop ECM-mimicking biomaterials having a self-regenerative capacity to stimulate tissue regeneration, instead of attempting to recreate the complexity of living tissues or tissue constructs ex vivo. The principles of materiobiology may benefit the development of novel biomaterials providing combinative bioactive cues to activate the migration of stem cells from endogenous reservoirs (i.e., cell niches), stimulate robust and scalable self-healing mechanisms, and unlock the body's innate powers of regeneration.

Complex, multi-scale small intestinal topography replicated in cellular growth substrates fabricated via chemical vapor deposition of Parylene C

Native small intestine possesses distinct multi-scale structures (e.g., crypts, villi) not included in traditional 2D intestinal culture models for drug delivery and regenerative medicine. The known impact of structure on cell function motivates exploration of the influence of intestinal topography on the phenotype of cultured epithelial cells, but the irregular, macro- to submicron-scale features of native intestine are challenging to precisely replicate in cellular growth substrates. Herein, we utilized chemical vapor deposition of Parylene C on decellularized porcine small intestine to create polymeric intestinal replicas containing biomimetic irregular, multi-scale structures. These replicas were used as molds for polydimethylsiloxane (PDMS) growth substrates with macro to submicron intestinal topographical features. Resultant PDMS replicas exhibit multiscale resolution including macro- to micro-scale folds, crypt and villus structures, and submicron-scale features of the underlying basement membrane. After 10 d of human epithelial colorectal cell culture on PDMS substrates, the inclusion of biomimetic topographical features enhanced alkaline phosphatase expression 2.3-fold compared to flat controls, suggesting biomimetic topography is important in induced epithelial differentiation. This work presents a facile, inexpensive method for precisely replicating complex hierarchal features of native tissue, towards a new model for regenerative medicine and drug delivery for intestinal disorders and diseases.

The potential for the use of nanofeaturing in medical devices

This review looks at potential developments in medical devices which may be based upon nanofeaturing implant and tissue engineering scaffolds, and describes the basic science upon which such expectations are based.

Nanotopography-guided tissue engineering and regenerative medicine

Human tissues are intricate ensembles of multiple cell types embedded in complex and well-defined structures of the extracellular matrix (ECM). The organization of ECM is frequently hierarchical from nano to macro, with many proteins forming large scale structures with feature sizes up to several hundred microns. Inspired from these natural designs of ECM, nanotopography-guided approaches have been increasingly investigated for the last several decades. Results demonstrate that the nanotopography itself can activate tissue-specific function in vitro as well as promote tissue regeneration in vivo upon transplantation. In this review, we provide an extensive analysis of recent efforts to mimic functional nanostructures in vitro for improved tissue engineering and regeneration of injured and damaged tissues. We first characterize the role of various nanostructures in human tissues with respect to each tissue-specific function. Then, we describe various fabrication methods in terms of patterning principles and material characteristics. Finally, we summarize the applications of nanotopography to various tissues, which are classified into four types depending on their functions: protective, mechano-sensitive, electro-active, and shear stress-sensitive tissues. Some limitations and future challenges are briefly discussed at the end.

Architectural characterization of organotypic cultures of H400 and primary rat keratinocytes

Organotypic epithelial structures can be cultured using primary or immortalized keratinocytes. However, there has been little detailed quantitative histological characterization of such cultures in comparison with normal mucosal architecture. The aim of this study is to identify morphological markers of tissue architecture that can be used to monitor tissue structure, maturation, and differentiation and to enable quantitative comparison of organotypic cultures (OCs) with normal oral mucosa. OCs of oral keratinocytes [immortalized H400 or primary rat keratinocytes (PRKs)] were generated using the three scaffolds of de-epidermalized dermis (DED), polyethylene terephthalate (PET), and collagen gels for up to 14 days. Cultures and normal epithelium were analyzed immunohistochemically and by using the semi-quantitative reverse transcriptase polymerase chain reaction (sq-RT-PCR) for E-cadherin, desmoglein-3, plakophilin, involucrin, cytokeratins-1, -5, -6, -10, -13, and Ki67. The epithelial thickness of OCs was measured in stained sections using image processing. Histological analysis revealed that air-liquid interface (ALI) cultures generated stratified organotypic epithelial structures by 14-days. The final thickness of these cultures as well as the degree of maturation/stratification (including stratum corneum formation) varied significantly depending on the scaffold used. For certain scaffolds, the immunohistochemical profiles obtained recapitulated those of normal oral epithelium indicating comparable in vitro differentiation and proliferation. In conclusion, quantitative microscopy approaches enabled unbiased architectural characterization of OCs. The scaffold materials used in the present study (DED, collagen type-I and PET) differentially influenced cell behavior in OCs of oral epithelia. H400 and PRK OCs on DED at the ALI demonstrated similar characteristics in terms of gene expression and protein distribution to the normal tissue architecture.

Development of microfabricated dermal epidermal regenerative matrices to evaluate the role of cellular microenvironments on epidermal morphogenesis

Topographic features at the dermal-epidermal junction (DEJ) provide instructive cues critical for modulating keratinocyte functions and enhancing the overall architecture and organization of skin. This interdigitated interface conforms to a series of rete ridges and papillary projections on the dermis that provides three-dimensional (3D) cellular microenvironments as well as structural stability between the dermal and epidermal layers during mechanical loading. The dimensions of these cellular microenvironments exhibit regional differences on the surface of the body, and quantitative histological analyses have shown that localization of highly proliferative keratinocytes also varies, according to the regional geometries of these microenvironments. In this study, we combined photolithography, collagen processing, and biochemical conjugation techniques to create microfabricated dermal epidermal regeneration matrices (μDERMs) with features that mimic the native 3D cellular microenvironment at the DEJ. We used this model system to study the effect of the 3D cellular microenvironment on epithelialization and basal keratinocyte interaction with the microenvironment on the surface of the μDERMs. We found that features closely mimicking those in high-friction areas of the body (deep, narrow channels) epithelialized faster than features mimicking low-friction areas. Additionally, when evaluating β1 expression, an integrin involved in epidermal morphogenesis, it was found that integrin-bright expression was localized in the depths of the features, suggesting that the μDERMs may play a role in defining cellular microenvironments as well as a protective environment for the regenerative population of keratinocytes. The outcomes of this study suggest that μDERMs can serve as a robust biomimetic model system to evaluate the roles of the 3D microenvironment on enhancing the regenerative capacity and structural stability of bioengineered skin substitutes.

EFFECTS OF GELATIN MODIFICATION ON RAPID PROTOTYPING PCL SCAFFOLDS FOR CARTILAGE ENGINEERING

The purpose of this study was to investigate the attachment and proliferation of cells on selective laser-sintered (SLS) polycaprolactone (PCL) scaffolds coated with gelatin for cartilage tissue engineering using chondrocytes isolated from the articular cartilage of swine. Scaffolds without modification were used as control groups. Cell proliferation was measured by cell count 1, 3 and 5 days after cell seeding into the scaffolds. The biocompatibility of the scaffold was examined by scanning electron microscopy (SEM). The PCL scaffolds coated with gelatin had higher hydrophilicity. The results provided a useful strategy for modifying the microenvironments to increase cell attachment, growth and the formation of extracellular matrix on scaffolds for cartilage tissue engineering.

The development of collagen-GAG scaffold-membrane composites for tendon tissue engineering

Current tissue engineering approaches for tendon defects require improved biomaterials to balance microstructural and mechanical design criteria. Collagen-glycosaminoglycan (CG) scaffolds have shown considerable success as in vivo regenerative templates and in vitro constructs to study cell behavior. While these scaffolds possess many advantageous qualities, their mechanical properties are typically orders of magnitude lower than orthopedic tissues such as tendon. Taking inspiration from mechanically efficient core-shell composites in nature such as plant stems and porcupine quills, we have created core-shell CG composites that display high bioactivity and improved mechanical integrity. These composites feature integration of a low density, anisotropic CG scaffold core with a high density, CG membrane shell. CG membranes were fabricated via an evaporative process that allowed separate tuning of membrane thickness and elastic moduli and were found to be isotropic in-plane. The membranes were then integrated with an anisotropic CG scaffold core via freeze-drying and subsequent crosslinking. Increasing the relative thickness of the CG membrane shell was shown to increase composite tensile elastic modulus by as much as a factor of 36 in a manner consistent with predictions from layered composites theory. CG scaffold-membrane composites were found to support tendon cell viability, proliferation, and metabolic activity in vitro, suggesting they maintain sufficient permeability while demonstrating improved mechanical strength. This work suggests an effective, biomimetic approach for balancing strength and bioactivity requirements of porous scaffolds for tissue engineering.

Chemical and physical modifications to poly(dimethylsiloxane) surfaces affect adhesion of Caco-2 cells

Polydimethylsiloxane (PDMS) silicone elastomer is extensively used in soft lithography processes to fabricate microscale or nano scale systems for microfluidic or cell culture applications. Though PDMS is biocompatible, it is not an ideal material for cell culture due to its poor cell adhesion properties. In this study, PDMS surfaces were modified to promote intestinal cell adhesion, in the interest of testing feasibility of using microfabricated PDMS systems for high throughput drug screening. Modification techniques included changing chemical composition of PDMS (i.e., varying curing to mixing agent ratio, and oxidization of PDMS surface by oxygen plasma), surface treatment of PDMS by coating with charged molecules (i.e., poly-D-lysine, L-alpha-phosphatidylcholine, and a layer bylayer coating), and deposition of extracellular matrix (ECM) proteins (i.e., laminin, fibronectin, and collagen). The influence of these modifications on PDMS properties, including elastic modulus and surface properties (wettability, chemical composition, topography, and protein adsorption) were characterized. Modification techniques were all found to change PDMS properties and influence the attachment and proliferation of Caco-2 cells over three days of culture to varying degrees. Generally, Caco-2 cells preferred to attach on collagen-coated, fibronectin-coated, and fibronectin-coated oxygen-plasma treated PDMS. The results highlight the importance of considering multiple physical and chemical factors that may be influenced by biomaterial modification and result in altered cell attachment to microfabricated systems, including surface hydrophobicity, chemical composition, stiffness, and topography. This study provides a foundation for further miniaturization, utilizing soft lithography techniques, of Caco-2 cell-based system for high-throughput screening of drug intestinal absorption during lead optimization in drug discovery. The understanding of different surface modifications on adjusting cell adhesion on PDMS allows systemic design of Biomicroelectromechanical Systems (BioMEMS) with tunable cell adhesion properties.

Synergic effects of crypt-like topography and ECM proteins on intestinal cell behavior in collagen based membranes

The basement membrane of small intestinal epithelium possesses complex topography at multiple scales ranging from the mesoscale to nanoscale. Specifically, intestinal crypt-villus units are comprised of hundred-micron-scale well-like invaginations and finger-like projections; intestinal cell phenotype is related to location on this crypt-villus unit. A biomimetic intestinal cell culture system composed of type I collagen based permeable cell culture membranes incorporating both micron-scale intestinal crypt-like topography and nanometer scale topography was fabricated. Membranes were pre-incubated with either laminin (Ln) or fibronectin (Fn), inoculated with intestinal epithelial Caco-2 cells and cultured for 1-21 days to study the relative significance of influence of crypt-like topography and biomimetic substrate chemistry on cell phenotype. Crypt-like topography inhibited Caco-2 differentiation during early culture, as evidenced by slower cell spreading and lower brush border enzyme activity. For example, alanine aminopeptidase activity was lower on Ln-coated patterned collagen ( approximately 3.4+/-0.24mU/mg) compared to flat collagen (10.84+/-0.55mU/mg) at day 7. Caco-2 cultured on Fn-coated collagen started to spread earlier (1 day vs 3 days) and formed longer protrusions than on Ln-coated collagen. Pre-coating of Ln enhanced cell differentiation, as the maximum activity of a cell differentiation marker (alkaline phosphatase) was 2-3 times higher than on Fn-coated collagen, and maintained differentiated phenotype in long term (up to 21 days) culture. In general, compared to substrate topography, coating with ECM protein had more prominent and longer effect on cell behavior. Crypt-like topography affected Caco-2 spreading and differentiation during early culture, however the effect diminished as culture progressed. This information will benefit intestinal tissue engineering scaffold design, and modification of in vitro intestinal cell models.

Microbioreactors for Raman microscopy of stromal cell differentiation

We present the development of microbioreactors with a sensitive and accurate optical coupling to a confocal Raman microspectrometer. We show that such devices enable in situ and in vitro investigation of cell cultures for tissue engineering by chemically sensitive Raman spectroscopic imaging techniques. The optical resolution of the Raman microspectrometer allows recognition and chemical analysis of subcellular features. Human bone marrow stromal cells (hBMSCs) have been followed after seeding through a phase of early proliferation until typically 21 days later, well after the cells have differentiated to osteoblasts. Long-term perfusion of cells in the dynamic culture conditions was shown to be compatible with experimental optical demands and off-line optical analysis. We show that Raman optical analysis of cells and cellular differentiation in microbioreactors is feasible down to the level of subcellular organelles during development. We conclude that microbioreactors combined with Raman microspectroscopy are a valuable tool to study hBMSC proliferation, differentiation, and development into tissues under in situ and in vitro conditions.

Carbodiimide conjugation of fibronectin on collagen basal lamina analogs enhances cellular binding domains and epithelialization

To improve the regenerative potential of biomaterials used as bioengineered scaffolds, it is necessary to strategically incorporate biologically active molecules that promote in vivo cellular processes that lead to a fully functional tissue. This work evaluates the effects of strategically binding fibronectin (FN) to collagen basal lamina analogs to enhance keratinocyte functions necessary for complete skin regeneration. We found that FN that was passively adsorbed to collagen-glycosaminoglycan basal lamina analogs enhanced epithelial thickness and keratinocyte proliferation compared with nontreated basal lamina analogs at 3 days of air/liquid (A/L) interface culture. Additionally, we evaluated the availability of FN cellular binding site domains when FN was either passively adsorbed or [1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride] conjugated to basal lamina analogs fabricated from collagen-glycosaminoglycan coprecipitate or self-assembled type I collagen. It was found that 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride conjugation of FN significantly enhanced FN binding site presentation as well as epithelial thickness. Overall, the results gained from this study will be used to improve the regenerative capacity of basal lamina analogs for bioengineered skin substitutes as well as the development of bioengineered scaffolds for other tissue engineering applications.

Nanopatterning of collagen scaffolds improve the mechanical properties of tissue engineered vascular grafts

Tissue engineered constructs with cells growing in an organized manner have been shown to have improved mechanical properties. This can be especially important when constructing tissues that need to perform under load, such as cardiac and vascular tissue. Enhancement of mechanical properties of tissue engineered vascular grafts via orientation of smooth muscle cells by the help of topographical cues have not been reported yet. In the present study, collagen scaffolds with 650, 500, and 332.5 nm wide nanochannels and ridges were designed and seeded with smooth muscle cells isolated from the human saphenous vein. Cell alignment on the construct was shown by SEM and fluorescence microscopy. The ultimate tensile strength (UTS) and Young's modulus of the scaffolds were determined after 45 and 75 days. Alamar Blue assay was used to determine the number of viable cells on surfaces with different dimensioned patterns. Presence of nanopatterns increased the UTS from 0.55 +/- 0.11 to as much as 1.63 +/- 0.46 MPa, a value within the range of natural arteries and veins. Similarly, Young's modulus values were found to be around 4 MPa, again in the range of natural vessels. The study thus showed that nanopatterns as small as 332.5 nm could align the smooth muscle cells and that alignment significantly improved mechanical properties, indicating that nanopatterned collagen scaffolds have the potential for use in the tissue engineering of small diameter blood vessels.

Influence of micro-well biomimetic topography on intestinal epithelial Caco-2 cell phenotype

A microfabrication approach was utilized to create topographic analogs of intestinal crypts on a polymer substrate. It was hypothesized that biomimetic crypt-like micro-architecture may induce changes in small intestinal cell (i.e. Caco-2 cell) phenotype. A test pattern of micro-well features with similar dimensions (50, 100, and 500 microm diameter, 50 microm spacing, 120 microm in depth) to the crypt structures found in native basal lamina was produced in the surface of a poly(dimethylsiloxane) (PDMS) substrate. PDMS surfaces were coated with fibronectin, seeded with intestinal-epithelial-cell-like Caco-2 cells, and cultured up to fourteen days. The cells were able to crawl along the steep side walls and migrated from the bottom to the top of the well structures, completely covering the surface by 4-5 days in culture. The topography of the PDMS substrates influenced cell spreading after seeding; cells spread faster and in a more uniform fashion on flat surfaces than on those with micro-well structures, where cell protrusions extending to micro-well side walls was evident. Substrate topography also affected cell metabolic activity and differentiation; cells had higher mitochondrial activity but lower alkaline phosphatase activity at early time points in culture (2-3 days post-seeding) when seeded on micro-well patterned PDMS substrates compared to flat substrates. These results emphasize the importance of topographical design properties of a scaffolds used for tissue engineered intestine.

Primary Study on Transplantation of Endothelialized Dermal Equivalents Into Normal Rats

This study was designed to determine the ability of human umbilical vein endothelial cells (HUVEC) in dermal equivalent (DE) to form microvessel-like tubes after transplantation into normal rats. A mixture of rat fibroblasts and HUVEC was inosculated into collagen-chitosan sponges to prepare endothelialized dermal equivalents (EDE). After culture in vitro for 24 hours, inosculated cells dispersed throughout the sponges and the equivalents were transplanted subcutaneously into the back of normal Lewis rats. Anti-human specific CD31 antibody was used for immunohistochemical localization of human endothelial cells in sections of EDE excised from rats after grafting. HUVEC in EDE organized into microvessel-like tubes at the end of the first week after transplantation, which still persisted after two weeks. The host microvessels began to pervade both DE and EDE during the second week after transplantation. These results demonstrated that HUVEC in EDE was able to persist and form microvessel-like tubes after transplantation into normal rats, and this is the first time to transplant DE containing HUVEC into normal rats.

A microfabricated porous collagen-based scaffold as prototype for skin substitutes

An important element of artificial skin is a tissue scaffold that allows for fast host regeneration. We present a microfabrication strategy, based on gelling collagen-based components inside a microfluidic device, that produces well-controlled pore sizes inside the scaffold. This strategy can produce finely patterned tissue scaffolds of clinically relevant dimensions suitable for surgical handling. Compared to porous collagen-based sponges produced by lyophilization, microfabricated tissue scaffolds preserve the fibrous structure and ligand density of natural occurring collagen. A fibroblast migration assay revealed fast cellular migration through the pores, which is desired for rapid tissue ingrowth. Finally, we also demonstrate a strategy to use this microfabrication technique to build anatomically accurate, multi-component skin substitutes in a cost-effective manner.

Microelectrochemical modulation of micropatterned cellular environments

Patterned cell cultures obtained by microcontact printing have been modified in situ by a microelectrochemical technique. It relies on lifting cell-repellent properties of oligo(ethylene glycol)-terminated self-assembled monolayers (SAMs) by Br2, which is produced locally by an ultramicroelectrode of a scanning electrochemical microscope (SECM). After Br2 treatment the SAM shows increased permeability and terminal hydrophobicity as characterized by SECM approach curves and contact angle measurements, respectively. Polarization-modulation Fourier transform infrared reflection-absorption spectroscopic (PM FTIRRAS) studies on macroscopic samples show that the Br2 treatment removes the oligo(ethelyene glycol) part of the monolayer within a second time scale while the alkyl part of the SAM degrades with a much slower rate. The lateral extension of the modification can be limited because heterogeneous electron transfer from the gold support destroys part of the electrogenerated Br2 once the monolayer is locally damaged in a SECM feedback configuration. This effect has been reproduced and analyzed by exposing SAM-modified samples to Br2 in the galvanic cell Au|SAM|5 microM Br2 + 0.1 M Na2SO4||10 microM KBr + 0.1 M Na2SO4|Au followed by an PM FTIRRAS characterization of the changes in the monolayer system.

Modification of sericin-free silk fibers for ligament tissue engineering application

Biomedical application of silk requires the removal of sericin that is the gumming material of native silk fibers. This is because sericin can elicit an adverse immune response after implantation in the human body. However, the removal of sericin causes the silk fiber to fray and weakens its structural property, making it very difficult to knit or braid them into a scaffold for ligament tissue engineering applications. The aim of this study was to replace sericin with gelatin using NDGA as a cross-linking agent to biomimic the natural structure of native silk fibers. The physical properties and biocompatibility of the modified and native silk fibers were compared by in vitro and in vivo models. The mechanical and swelling properties of sericin-free silk fibers were greatly increased after modification with gelatin. Both modified and native silk fibers were shown to be nontoxic by in vitro cytotoxicity tests. The in vivo study demonstrated that the modified silk fibers, after 4 weeks' subcutaneous implantation in rats, caused little or no inflammatory reaction as compared with native silk fibers. The superior mechanical properties and lower inflammatory potential of modified silk fibers make them a promising candidate for ligament tissue engineering applications.

Microstructured extracellular matrices in tissue engineering and development

Microscale heterogeneity in the extracellular matrix (ECM) provides spatial information that allows tissues to develop and function properly in vivo. This heterogeneity in composition (chemistry) and structure (geometry) creates distinct microenvironments for the cells that comprise a tissue. In response, populations of cells can coordinate their behaviors across micrometer-to-millimeter length scales to function as a unified whole. We believe techniques to mimic the microscale heterogeneity of the ECM in vitro will revolutionize studies that examine how large groups of cells interact. Micropatterned ECMs used for engineering perfused microvascular networks and functional epidermis and for understanding symmetry-breaking events in epithelial morphogenesis illustrate potential applications in tissue engineering and development.

Cornea engineering on polyester carriers

In this study, biodegradable polyester based carriers were designed for tissue engineering of the epithelial and the stromal layers of the cornea, and the final construct was tested in vitro. In the construction of the epithelial layer, micropatterned films were prepared from blends of biodegradable and biocompatible polyesters of natural (PHBV) and synthetic (P(L/DL)LA) origin, and these films were seeded with D407 (retinal pigment epithelial) cells. To improve cell adhesion and growth, the films were coated with fibronectin. To serve as the stromal layer of the cornea, highly porous foams of P(L/DL)LA-PHBV blends were seeded with 3T3 fibroblasts. Cell numbers on the polyester carriers were significantly higher than those on the tissue culture polystyrene control. The cells and the carriers were characterized scanning electron micrographs showed that the foam was highly porous and the pores were interconnected. 3T3 Fibroblasts were distributed quite homogeneously at the seeding site, but probably because of the high thickness of the carrier ( approximately 6 mm); they could not sufficiently populate the core (central parts of the foam) during the test duration. The D407 cells formed multilayers on the micropatterned polyester film. Immunohistochemical studies showed that the cells retained their phenotype during culturing; D407 cells formed tight junctions characteristic of epithelial cells, and 3T3 cells deposited collagen type I into the foams. On the basis of these results, we concluded that the micropatterned films and the foams made of P(L/DL)LA-PHBV blends have a serious potential as tissue engineering carriers for the reconstruction of the epithelial and stromal layers of the cornea.

Conjugation of extracellular matrix proteins to basal lamina analogs enhances keratinocyte attachment

The dermal-epidermal junction of skin contains extracellular matrix proteins that are involved in initiating and controlling keratinocyte signaling events such as attachment, proliferation, and terminal differentiation. To characterize the relationship between extracellular matrix proteins and keratinocyte attachment, a biomimetic design approach was used to precisely tailor the surface of basal lamina analogs with biochemistries that emulate the native biochemical composition found at the dermal-epidermal junction. A high-throughput screening device was developed by our laboratory that allows for the simultaneous investigation of the conjugation of individual extracellular matrix proteins (e.g. collagen type I, collagen type IV, laminin, or fibronectin) as well as their effect on keratinocyte attachment, on the surface of an implantable collagen membrane. Fluorescence microscopy coupled with quantitative digital image analyses indicated that the extracellular matrix proteins adsorbed to the collagen-GAG membranes in a dose-dependent manner. To determine the relationship between extracellular matrix protein signaling cues and keratinocyte attachment, cells were seeded on protein-conjugated collagen-GAG membranes and a tetrazolium-based colorimetric assay was used to quantify viable keratinocyte attachment. Our results indicate that keratinocyte attachment was significantly enhanced on the surfaces of collagen membranes that were conjugated with fibronectin and type IV collagen. These findings define a set of design parameters that will enhance keratinocyte binding efficiency on the surface of collagen membranes and ultimately improve the rate of epithelialization for dermal equivalents.

Influence of channel width on alignment of smooth muscle cells by high-aspect-ratio microfabricated elastomeric cell culture scaffolds

Engineered smooth muscle tissue requires ordered configurations of cells to reproduce native function, and microtechnology offers possibilities for physically and chemically controlling cell organization with high spatial resolution. In this work, poly(dimethylsiloxane) microchannel scaffolds, modified by layer-by-layer self-assembly of polyelectrolytes to promote cell adhesion, were evaluated for use as substrates for the culture of aligned smooth muscle cells. The hypothesis that narrower channels would result in better alignment was tested using channel width dimensions of 20, 30, 40, 50, and 60 microm, in addition to flat (control) surfaces. Alignment of cells was assessed by two different methods, each sensitive to a different aspect of cell alignment from fluorescence micrographs. Two-dimensional fast Fourier transform analysis was performed to analyze the orientation distribution of actin filaments in cells. This was complemented by connectivity analysis of stained nuclei to obtain nuclear orientation distributions. Both methods produced consistent data that support the hypothesis that narrow microchannels promote a highly aligned culture of smooth muscle cells, and the degree of alignment is dependent on the microchannel width. Precise replication of in vivo cell alignment in engineered tissue, with the ability to tailor specific surface chemistries of the scaffold to the desired application, will potentially allow the production of artificial tissue that more closely duplicates the structure and function of native tissue.

High-throughput investigation of osteoblast response to polymer crystallinity: influence of nanometer-scale roughness on proliferation

A high-throughput method for analyzing cellular response to crystallinity in a polymer material is presented. Variations in crystallinity lead to changes in surface roughness on nanometer length scales, and it is shown that cells are exquisitely sensitive to these changes. Gradients of polymer crystallinity were fabricated on films of poly(L-lactic acid) using a gradient in annealing temperature. The resultant morphologies were characterized using an atomic force microscope. Root-mean-square (rms) roughness values ranging from 0.5 to 13 nm were created on a single sample. MC3T3-E1 osteoblastic cells were cultured for 1, 3 and 5 d, and the number of cells was measured using automated fluorescence microscopy. It is shown that the rate of proliferation on the smooth regions of the films is much greater than that on the rough regions, and a monotonic variation in rate is observed as a function of roughness. The critical rms roughness, above which a statistically significant reduction in rate of proliferation occurs, was approximately 1.1 nm. Fluorescence microscopy measurements on immunostained cells indicate there is no significant change in cell area, the number or type of adhesions formed, or the degree of actin polymerization. Results from enzyme-linked immunofluorescence assays indicated that there was no detectable change in adhesion protein accessibility, suggesting the cells directly respond to substrate topography. The use of the gradient library approach yielded the functional dependence of cell proliferation on nanometer-scale roughness and gave a sensitive estimate of the critical roughness for which a decrease in proliferation is observed.

Properties of crosslinked protein matrices for tissue engineering applications synthesized by multiphoton excitation

We demonstrate the fabrication of model scaffolds and extracellular matrices using multiphoton excited photochemistry. This method is three-dimensional in nature and has excellent biocompatibility. Crosslinked matrices were fabricated from the proteins fibrinogen, fibronectin, and concanavalin A using two-photon rose bengal photoactivation and the relatives rates were determined. Immunofluorescence labeling of fibrinogen and fibronectin indicated retention of bioactivity following the multiphoton crosslinking process. Using the fluorescence recovery after photobleaching method, we measured the lateral mobility of fluorescent dyes of different mass and chemistry in order to model the behavior of therapeutic agents and bioactive molecules and found diffusion coefficients within these fabricated structures to be on the order of 10(-9)-10(-10) cm(2)/s, or approximately three to four orders of magnitude slower than in free solution. The precise diffusion coefficients can be smoothly tuned by varying the laser exposure during the fabrication of the matrix, which results in both an increase in crosslink density as well as protein concentration in the matrix. Terminal crosslink density is achieved at integrated high exposure dose and the relative fabrication rates were determined for these proteins. For all the proteins, the range of diffusion coefficients between the threshold for fabrication and the terminal limit is correlated with the change in matrix mesh size as determined by Flory-Rehner swelling analysis. Both normal Fickian as well as hindered anomalous diffusion is observed depending on specific molecular interactions of the tracer dyes and protein host. (c) 2004 Wiley Periodicals, Inc. J Biomed Mater Res 71A: 359-368, 2004.

The influence of microtextured basal lamina analog topography on keratinocyte function and epidermal organization

The rational design of future bioengineered skin substitutes requires an understanding of the mechanisms by which the three-dimensional microarchitecture of tissue scaffolds modulates keratinocyte function. Microtextured basal lamina analogs were developed to investigate the relationship between the characteristic topography at the dermal-epidermal interface of native skin and keratinocyte function. Microfabrication techniques were used to create master patterns, negative replicates, and collagen membranes with ridges and channels of length scales (e.g., grooves of 50-200 microm in depth and width) similar to the invaginations found in basal lamina at the dermal-epidermal junction of native skin. Keratinocytes were seeded on the surfaces of basal lamina analogs, and histological analyses were performed after 7 days of tissue culture at the air-liquid interface. The keratinocytes formed a differentiated and stratified epidermis that conformed to the features of the microtextured membranes. Morphometric analyses of immunostained skin equivalents suggest that keratinocyte stratification and differentiation increases as channel depth increases and channel width decreases. This trend was most pronounced in channels with the highest depth-to-width ratios (i.e., 200 microm deep, 50 microm wide). It is anticipated that the findings from these studies will elucidate design parameters to enhance the performance of future bioengineered skin substitutes.

Biomimetic surface modification of poly (L-lactic acid) with gelatin and its effects on articular chondrocytes in vitro

Our objective in this study was to investigate the efficiency of two treatments for poly (L-lactic acid) (PLLA) surface modification with gelatin, via entrapment and coupling, using 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) and N-hydroxysuccinimide (NHS). The properties of original PLLA, gelatin-entrapped, and coupled PLLA films were investigated by water contact angle measurement and electron spectroscopy for chemical analysis (ESCA). The water contact angle indicated that the incorporation of gelatin resulted in a change in hydrophilicity, and the ESCA data suggested that the modified PLLA films became enriched with nitrogen atoms. The cytocompatibility of modified PLLA films might be improved. Therefore, we examined the attachment and proliferation of bovine articular chondrocyte seeded on modified PLLA films and virgin films. A whole-cell enzyme-linked immunosorbent assay (cell ELISA) that detects 5-bromo-2'-deoxyuridine (BrdU) incorporation during DNA synthesis and collagen type II secretion was applied to evaluate the chondrocytes on different PLLA films and tissue culture plates (TCPS). Cell viability was estimated by the MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide] assay, and cell function was assessed by measuring glycosaminoglycan (GAG) secreted by chondrocytes. These results implied that gelatin used to modify the PLLA surface through entrapment and coupling could enhance chondrocyte adhesion, proliferation, and function.

Spreading of epithelial cells on machined and sandblasted titanium surfaces: an in vitro study

BACKGROUND

The purpose of this investigation was to determine the influence of the surface structure of dental implants on epithelial cell spreading and growth in vitro. Cell morphology on machined and sandblasted titanium surfaces was investigated.

METHODS

A total of 10 machined and 10 sandblasted discs and 10 glass coverslips were used for the present study. Samples were analyzed using scanning electron microscopy (SEM) and the cell spreading area was determined using a video image analysis system.

RESULTS

After 24 hours incubation, keratinocytes grown on sandblasted titanium samples displayed numerous, long, and branched or dendritic filopodia closely adapted to the surface roughness. Filopodia varied from 3 to 12 microm in length and 0.1 to 0.3 microm in width. Cells cultured on a machined surface did not present such cytoplasmic extensions and displayed a round morphology. Keratinocytes seeded on glass coverslips were flat and edged by filopodia (maximum length 7 to 8 microm) on the spreading site of the cluster. Though cell morphology is comparable with that observed on sandblasted specimens, cytoplasmic extensions suggestive of strong adhesion and spreading attitude were less pronounced.

CONCLUSION

These results indicate that sandblasted surfaces are the optimal substrata for epithelial cell adhesion and spreading.