1
|
Smith PA, Wang Y, Frazier OH. The Evolution of Durable, Implantable Axial-Flow Rotary Blood Pumps. Tex Heart Inst J 2023; 50:492012. [PMID: 37011366 PMCID: PMC10178652 DOI: 10.14503/thij-22-7908] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/05/2023]
Abstract
Left ventricular assist devices (LVADs) are increasingly used to treat patients with end-stage heart failure. Implantable LVADs were initially developed in the 1960s and 1970s. Because of technological constraints, early LVADs had limited durability (eg, membrane or valve failure) and poor biocompatibility (eg, driveline infections and high rates of hemolysis caused by high shear rates). As the technology has improved over the past 50 years, contemporary rotary LVADs have become smaller, more durable, and less likely to result in infection. A better understanding of hemodynamics and end-organ perfusion also has driven research into the enhanced functionality of rotary LVADs. This paper reviews from a historical perspective some of the most influential axial-flow rotary blood pumps to date, from benchtop conception to clinical implementation. The history of mechanical circulatory support devices includes improvements related to the mechanical, anatomical, and physiologic aspects of these devices. In addition, areas for further improvement are discussed, as are important future directions-such as the development of miniature and partial-support LVADs, which are less invasive because of their compact size. The ongoing development and optimization of these pumps may increase long-term LVAD use and promote early intervention in the treatment of patients with heart failure.
Collapse
Affiliation(s)
- P Alex Smith
- Innovative Design and Engineering Applications Laboratory, The Texas Heart Institute, Houston, Texas
| | - Yaxin Wang
- Innovative Design and Engineering Applications Laboratory, The Texas Heart Institute, Houston, Texas
| | - O H Frazier
- Innovative Design and Engineering Applications Laboratory, The Texas Heart Institute, Houston, Texas
| |
Collapse
|
2
|
Li Y, Wang H, Xi Y, Sun A, Deng X, Chen Z, Fan Y. A New Mathematical Numerical Model to Evaluate the Risk of Thrombosis in Three Clinical Ventricular Assist Devices. Bioengineering (Basel) 2022; 9:bioengineering9060235. [PMID: 35735478 PMCID: PMC9219778 DOI: 10.3390/bioengineering9060235] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/17/2022] [Revised: 05/17/2022] [Accepted: 05/25/2022] [Indexed: 11/24/2022] Open
Abstract
(1) Background: Thrombosis is the main complication in patients supported with ventricular assist devices (VAD). Models that accurately predict the risk of thrombus formation in VADs are still lacking. When VADs are clinically assisted, their complex geometric configuration and high rotating speed inevitably generate complex flow fields and high shear stress. These non-physiological factors can damage blood cells and proteins, release coagulant factors and trigger thrombosis. In this study, a more accurate model for thrombus assessment was constructed by integrating parameters such as shear stress, residence time and coagulant factors, so as to accurately assess the probability of thrombosis in three clinical VADs. (2) Methods: A mathematical model was constructed to assess platelet activation and thrombosis within VADs. By solving the transport equation, the influence of various factors such as shear stress, residence time and coagulation factors on platelet activation was considered. The diffusion equation was applied to determine the role of activated platelets and substance deposition on thrombus formation. The momentum equation was introduced to describe the obstruction to blood flow when thrombus is formed, and finally a more comprehensive and accurate model for thrombus assessment in patients with VAD was obtained. Numerical simulations of three clinically VADs (CH-VAD, HVAD and HMII) were performed using this model. The simulation results were compared with experimental data on platelet activation caused by the three VADs. The simulated thrombogenic potential in different regions of MHII was compared with the frequency of thrombosis occurring in the regions in clinic. The regions of high thrombotic risk for HVAD and HMII observed in experiments were compared with the regions predicted by simulation. (3) Results: It was found that the percentage of activated platelets within the VAD obtained by solving the thrombosis model developed in this study was in high agreement with the experimental data (r² = 0.984), the likelihood of thrombosis in the regions of the simulation showed excellent correlation with the clinical statistics (r² = 0.994), and the regions of high thrombotic risk predicted by the simulation were consistent with the experimental results. Further study revealed that the three clinical VADs (CH-VAD, HVAD and HMII) were prone to thrombus formation in the inner side of the secondary flow passage, the clearance between cone and impeller, and the corner region of the inlet pipe, respectively. The risk of platelet activation and thrombus formation for the three VADs was low to high for CH-VAD, HVAD, and HM II, respectively. (4) Conclusions: In this study, a more comprehensive and accurate thrombosis model was constructed by combining parameters such as shear stress, residence time, and coagulation factors. Simulation results of thrombotic risk received with this model showed excellent correlation with experimental and clinical data. It is important for determining the degree of platelet activation in VAD and identifying regions prone to thrombus formation, as well as guiding the optimal design of VAD and clinical treatment.
Collapse
|
3
|
Rowlands GW, Antaki JF. High-speed visualization of ingested, ejected, adherent, and disintegrated thrombus in contemporary ventricular assist devices. Artif Organs 2020; 44:E459-E469. [PMID: 32530104 DOI: 10.1111/aor.13753] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/06/2020] [Revised: 05/31/2020] [Accepted: 06/04/2020] [Indexed: 01/01/2023]
Abstract
Biocompatibility of ventricular assist devices (VADs) has been steadily improving, yet the rate of neurological events remains unacceptably high. Recent speculation for elevated stroke rates centers on ingestion of thrombi originating upstream of the pump, such as in the ventricle or left atrial appendage. These thrombi may be ejected by the VAD or become deposited within the blood flow pathway, presenting serious complications to the patient. This study was performed to visualize and quantify the degree of disruption, adherence, and disintegration of thrombi that are ingested by the three most implanted VADs: the HeartMate II, HeartMate 3, and HVAD. Clot analogs of varying microstructure compositions (red, white) and sizes (0.5, 1, 2 cm3 ) were synthesized in vitro based on clinical explant data. These were introduced individually into an in vitro flow loop with a transparent replica of the HMII, HM3, and HVAD operated at nominal steady flow (2.3-4.0 L/min). High-speed videography (up to 10 000 fps) revealed the ingestion, disruption, ejection, and adherence of thrombus fragments. Thromboemboli of varying compositions and sizes were observed mechanically attaching to components in all 3 VAD models. In some instances, ingested thrombi physically obstructed portions of the blood flow path; 18% (3 of 17 total) of red thrombi adhered to the inflow straightener of the transparent HMII. In the HVAD model, fewer than 4% of clots were adherent or trapped within the pump, irrespective of microstructure or initial volume. In comparison, 100% (4 of 4 total) of 1-cm3 white (fibrin) clots became lodged within the transparent HM3 while, in contrast, less than 5% of macerated red clots (3 of 63 total) of the same volume were adherent inside the pump. A significant proportion of ingested thrombi were macerated into infinitesimal fragments; 84% and 74% of 2-cm3 red thrombi in the HVAD and HM3 models, respectively, were found to have disintegrated upon ingestion. However, large emboli were also discharged from both centrifugal VADs; these fragments, ranging from 0.01 to 0.29 cm3 regardless of microstructure and original volume, may be capable of occluding an intracranial vessel. Therefore, ingested thrombus may explain, in part, elevated stroke rates in contemporary blood pumps in the absence of adherent pump thrombosis.
Collapse
Affiliation(s)
- Grant W Rowlands
- Nancy E. and Peter C. Meinig School of Biomedical Engineering, Cornell University, Ithaca, NY, USA
| | - James F Antaki
- Nancy E. and Peter C. Meinig School of Biomedical Engineering, Cornell University, Ithaca, NY, USA
| |
Collapse
|
4
|
Blood trauma potential of the HeartWare Ventricular Assist Device in pediatric patients. J Thorac Cardiovasc Surg 2020; 159:1519-1527.e1. [DOI: 10.1016/j.jtcvs.2019.06.084] [Citation(s) in RCA: 20] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 03/03/2019] [Revised: 06/24/2019] [Accepted: 06/26/2019] [Indexed: 01/19/2023]
|
5
|
Classification of the Frequency, Severity, and Propagation of Thrombi in the HeartMate II Left Ventricular Assist Device. ASAIO J 2020; 66:992-999. [DOI: 10.1097/mat.0000000000001151] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/02/2023] Open
|
6
|
Zhang J, Chen Z, Griffith BP, Wu ZJ. Computational characterization of flow and blood damage potential of the new maglev CH-VAD pump versus the HVAD and HeartMate II pumps. Int J Artif Organs 2020; 43:653-662. [PMID: 32043405 DOI: 10.1177/0391398820903734] [Citation(s) in RCA: 26] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
Left ventricular assist devices are routinely used to treat patients with advanced heart failure as a bridge to transplant or a destination therapy. However, non-physiological shear stress generated by left ventricular assist devices damages blood cells. The continued development of novel left ventricular assist devices is essential to improve the left ventricular assist device therapy for heart failure patients. The CH-VAD is a new maglev centrifugal left ventricular assist device. In this study, the CH-VAD pump was numerically analyzed and compared with the HVAD and HeartMate II pumps under two clinically relevant conditions (flow: 4.5 L/min, pressure head: normal ~80 and hypertension ~120 mmHg). The velocity and shear stress fields, washout, and hemolysis index of the three pumps were assessed with computational fluid dynamics analysis. Under the same condition, the CH-VAD hemolysis index was two times lower than the HVAD and HeartMate II pumps; the CH-VAD had the least percentage volume with shear stress larger than 100 Pa (i.e. normal condition: 0.4% vs HVAD 1.0%, and HeartMate II 2.9%). Under the normal condition, more than 98% was washed out of the three pumps within 0.4 s. The washout times were slightly shorter under the hypertension condition for the three pumps. No regions inside the CH-VAD or HVAD had extremely long residential time, while areas near the straightener of the HeartMate II pump had long residential time (>4 s) indicating elevated risks of thrombosis. The computational fluid dynamics results suggested that the CH-VAD pump has a better hemolytic biocompatibility than the HVAD and HeartMate II pumps under the normal and hypertension conditions.
Collapse
Affiliation(s)
- Jiafeng Zhang
- Department of Surgery, University of Maryland School of Medicine, Baltimore, MD, USA
| | - Zengsheng Chen
- Department of Surgery, University of Maryland School of Medicine, Baltimore, MD, USA
| | - Bartley P Griffith
- Department of Surgery, University of Maryland School of Medicine, Baltimore, MD, USA
| | - Zhongjun J Wu
- Department of Surgery, University of Maryland School of Medicine, Baltimore, MD, USA.,Fischell Department of Bioengineering, A. James Clark School of Engineering, University of Maryland, College Park, MD, USA
| |
Collapse
|
7
|
Assessment of the Flow Field in the HeartMate 3 Using Three-Dimensional Particle Tracking Velocimetry and Comparison to Computational Fluid Dynamics. ASAIO J 2020; 66:173-182. [DOI: 10.1097/mat.0000000000000987] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/22/2023] Open
|
8
|
Berk ZBK, Zhang J, Chen Z, Tran D, Griffith BP, Wu ZJ. Evaluation of in vitro hemolysis and platelet activation of a newly developed maglev LVAD and two clinically used LVADs with human blood. Artif Organs 2019; 43:870-879. [PMID: 31001834 PMCID: PMC6733624 DOI: 10.1111/aor.13471] [Citation(s) in RCA: 24] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/02/2018] [Revised: 03/08/2019] [Accepted: 04/11/2019] [Indexed: 12/17/2022]
Abstract
In vitro hemolysis testing remains one of the most important performance measures to judge the hemocompatibility of a left ventricular assist device (LVAD). Clinically relevant operating conditions and appropriate testing blood are essential to infer in vitro data for potential clinical use. This in vitro study was carried out to evaluate and compare the hemolytic performance of a newly developed magnetically levitated (maglev) LVAD (CH-VAD) with two clinically used LVADs (HVAD and HeartMate II (HMII)) using fresh human blood. A small volume (~300 mL) in vitro circulating flow loop was constructed with a LVAD generated flow of 4.5 L/min at the nominal or reported clinical operating speed for each LVAD. The blood was circulated in the loop for 4 hours with samples drawn at baseline and hourly. Plasma-free hemoglobin (PFH) concentrations in the hourly blood samples were determined with spectrophotometry. Normalized index of hemolysis (NIH) was calculated to compare the hemolytic performance of the CH-VAD and the two reference LVADs. Platelet activation was measured with flow cytometry. The experimental test for each device was repeated at least 7 times. The data from this study showed that all the three LVADs generated very low hemolysis (NIH <0.01 g/100 L). The CH-VAD was found to have a significantly lower NIH value (0.00135 ± 0.00032 g/100 L) compared to the HVAD (0.00525 ± 0.00183 g/100 L) and the HMII (0.00583 ± 0.00182 g/100 L). No statistically significant difference in device-generated hemolysis was found between the HVAD and the HMII. The level of platelet activation induced by the CH-VAD is significantly lower than those by the HVAD and the HMII. The data suggest that the shear-induced hemolysis and platelet activation of the CH-VAD are acceptable relative to the two LVADs currently in clinical use.
Collapse
Affiliation(s)
- Zachary B. K. Berk
- Department of Surgery, University of Maryland School of Medicine, Baltimore, MD, 21201, USA
| | - Jiafeng Zhang
- Department of Surgery, University of Maryland School of Medicine, Baltimore, MD, 21201, USA
| | - Zengsheng Chen
- Department of Surgery, University of Maryland School of Medicine, Baltimore, MD, 21201, USA
| | - Douglas Tran
- Department of Surgery, University of Maryland School of Medicine, Baltimore, MD, 21201, USA
| | - Bartley P. Griffith
- Department of Surgery, University of Maryland School of Medicine, Baltimore, MD, 21201, USA
| | - Zhongjun J. Wu
- Department of Surgery, University of Maryland School of Medicine, Baltimore, MD, 21201, USA
- Fischell Department of Bioengineering, A. James Clark School of Engineering, University of Maryland, College Park, MD 20742,USA
| |
Collapse
|
9
|
Chen Z, Jena SK, Giridharan GA, Koenig SC, Slaughter MS, Griffith BP, Wu ZJ. Flow features and device-induced blood trauma in CF-VADs under a pulsatile blood flow condition: A CFD comparative study. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN BIOMEDICAL ENGINEERING 2018; 34:10.1002/cnm.2924. [PMID: 28859253 PMCID: PMC5803368 DOI: 10.1002/cnm.2924] [Citation(s) in RCA: 43] [Impact Index Per Article: 7.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/14/2017] [Revised: 07/28/2017] [Accepted: 08/28/2017] [Indexed: 05/11/2023]
Abstract
In this study, the flow features and device-associated blood trauma in 4 clinical ventricular assist devices (VADs; 2 implantable axial VADs, 1 implantable centrifugal VAD, and 1 extracorporeal VAD) were computationally analyzed under clinically relevant pulsatile flow conditions. The 4 VADs were operated at fixed pump speed at a mean rate of 4.5 L/min. Mean pressure difference, wall shear stress, volume distribution of scalar shear stress (SSS), and shear-induced hemolysis index (HI) were derived from the flow field of each VAD and were compared. The computationally predicted mean pressure difference across the 3 implantable VADs was ~70 mmHg, and the extracorporeal VAD was ~345 mmHg, which matched well with their reported pressure-flow curves. The axial VADs had higher mean wall shear stress and SSS compared with the centrifugal VADs. However, the residence time of the centrifugal VADs was much longer compared with the axial VADs because of the large volume of the centrifugal VADs. The highest SSS was observed in one axial VAD, and the longest exposure time was observed in 1 centrifugal VAD. These 2 VADs generated the highest HI. The shear-induced HI varied as a function of flow rate within each cardiac cycle. At fixed pump speed, the HI was greatest at low flow rate due to longer exposure time to shear stress compared with at high flow rate. Subsequently, we hypothesize that to reduce the risk of blood trauma during VAD support, shear stress magnitude and exposure time need to be minimized.
Collapse
Affiliation(s)
- Zengsheng Chen
- Department of Surgery, University of Maryland School of Medicine, Baltimore, MD, 21201, USA
| | - Sofen K Jena
- Department of Cardiovascular and Thoracic Surgery, School of Medicine, University of Louisville, Louisville, KY, 40202, USA
| | - Guruprasad A Giridharan
- Department of Bioengineering, Speed School of Engineering, University of Louisville, Louisville, KY, 40292, USA
| | - Steven C Koenig
- Department of Cardiovascular and Thoracic Surgery, School of Medicine, University of Louisville, Louisville, KY, 40202, USA
- Department of Bioengineering, Speed School of Engineering, University of Louisville, Louisville, KY, 40292, USA
| | - Mark S Slaughter
- Department of Cardiovascular and Thoracic Surgery, School of Medicine, University of Louisville, Louisville, KY, 40202, USA
- Department of Bioengineering, Speed School of Engineering, University of Louisville, Louisville, KY, 40292, USA
| | - Bartley P Griffith
- Department of Surgery, University of Maryland School of Medicine, Baltimore, MD, 21201, USA
| | - Zhongjun J Wu
- Department of Surgery, University of Maryland School of Medicine, Baltimore, MD, 21201, USA
- Fischell Department of Bioengineering, A James Clark School of Engineering, University of Maryland, College Park, MD, 20742, USA
| |
Collapse
|
10
|
New Challenges in the Treatment of Patients With Left Ventricular Support: LVAD Thrombosis. Curr Heart Fail Rep 2016; 13:302-309. [DOI: 10.1007/s11897-016-0310-z] [Citation(s) in RCA: 16] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 10/20/2022]
|
11
|
YU JIAJIA, ZHANG XIWEN. HYDRODYNAMIC AND HEMOLYSIS ANALYSIS ON DISTANCE AND CLEARANCE BETWEEN IMPELLER AND DIFFUSER OF AXIAL BLOOD PUMP. J MECH MED BIOL 2016. [DOI: 10.1142/s0219519416500147] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/18/2022]
Abstract
Low hemolysis and hydraulic performance are important factors for an axial blood pump, which have been transplanted in patients with heart failure (HF). The distance and clearance between impeller and diffuser play a key role in hemolytic properties and hydraulic performances of axial blood pumps that were developed by our group inspired by the design features of HeartMate II. In the present study, we aimed to investigate the appropriate distance and clearance between impellers and diffusers of axial blood pumps, which contains the best low hemolytic property and hydraulic performance using the computational fluid dynamics (CFDs) approach. Specially, the hemolysis of the pump was calculated by using two different empirical power-law hemolytic blood damage models with two sets of parameters. The two hemolytic blood damage models with two sets of parameters were analyzed and compared. Further, the different distances and clearances between impellers and diffusers that affect hemolytic and hydraulic characteristics were also analyzed. The results showed that the pump with distance of 2[Formula: see text]mm and clearance of 0.2[Formula: see text]mm between impeller and diffuser exhibited the best hemolytic property and better hydraulic performance.
Collapse
Affiliation(s)
- JIAJIA YU
- Department of Engineering Mechanics, School of Aerospace, Tsinghua University, Beijing 100084, P. R. China
| | - XIWEN ZHANG
- Department of Engineering Mechanics, School of Aerospace, Tsinghua University, Beijing 100084, P. R. China
| |
Collapse
|
12
|
Classification of Unsteady Flow Patterns in a Rotodynamic Blood Pump: Introduction of Non-Dimensional Regime Map. Cardiovasc Eng Technol 2015; 6:230-41. [DOI: 10.1007/s13239-015-0231-0] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 03/15/2015] [Accepted: 06/22/2015] [Indexed: 11/25/2022]
|
13
|
Yang F, Kormos RL, Antaki JF. High-speed visualization of disturbed pathlines in axial flow ventricular assist device under pulsatile conditions. J Thorac Cardiovasc Surg 2015. [PMID: 26208892 DOI: 10.1016/j.jtcvs.2015.06.049] [Citation(s) in RCA: 31] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 12/16/2022]
Abstract
OBJECTIVE To investigate potentially prothrombotic flow patterns within an axial flow ventricular assist device under clinically relevant pulsatile hemodynamic conditions. METHODS A transparent replica of the HeartMate-II left ventricular assist device (Thoratec, Pleasanton, Calif) was visualized using a high speed camera at both low and high frame rates (125 and 3000 fps). Three steady-state conditions were studied: nominal (4.5 lpm), low flow (3.0 lpm), and high flow (6.0 lpm). Time-varying conditions were introduced with an external pulsatile pump that modulated the flow rate by approximately ± 50% of the mean, corresponding to a pulsatility index of 1.0. RESULTS At nominal and high flow rates, the path lines within the upstream region were generally stable, well attached, and streamlined. As the flow rate was reduced below 3.8 lpm, a rapid transition to a chaotic velocity field occurred, exhibiting a large toroidal vortex adjacent to the upstream bearing. The pathlines in the downstream stator section were consistently chaotic for all hemodynamic conditions investigated. It was common to observe tracer particles trapped within recirculation bubbles and drawn retrograde, causing repeated contact with the bearing surfaces. The addition of pulsatility caused the flow field to become periodically chaotic during the diastolic portion of the cardiac cycle depending on the instantaneous flow rate and acceleration. CONCLUSIONS The contribution of pulsatility by the native heart may induce a periodic disturbance to an otherwise stable flow field within an axial flow ventricular assist device, particularly during the diastolic and decelerating portion of the cardiac cycle. Potentially prothrombotic flow features were found to occur periodically in the region of the upstream bearing.
Collapse
Affiliation(s)
- Fang Yang
- Department of Biomedical Engineering, Carnegie Mellon University, Pittsburgh, Pa
| | - Robert L Kormos
- Department of Cardiovascular Surgery, University of Pittsburgh, Pittsburgh, Pa
| | - James F Antaki
- Department of Biomedical Engineering, Carnegie Mellon University, Pittsburgh, Pa.
| |
Collapse
|
14
|
Kormos RL. Left ventricular assist device pump thrombosis: understanding mechanisms as a key to causality. J Thorac Cardiovasc Surg 2014; 149:673-4. [PMID: 25583104 DOI: 10.1016/j.jtcvs.2014.11.073] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 11/23/2014] [Accepted: 11/24/2014] [Indexed: 11/27/2022]
Affiliation(s)
- Robert L Kormos
- Department of Cardiothoracic Surgery, University of Pittsburgh, Pittsburgh, Pa.
| |
Collapse
|
15
|
Marsden AL, Bazilevs Y, Long CC, Behr M. Recent advances in computational methodology for simulation of mechanical circulatory assist devices. WILEY INTERDISCIPLINARY REVIEWS. SYSTEMS BIOLOGY AND MEDICINE 2014; 6:169-88. [PMID: 24449607 PMCID: PMC3947342 DOI: 10.1002/wsbm.1260] [Citation(s) in RCA: 22] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/04/2013] [Revised: 11/06/2013] [Accepted: 12/16/2013] [Indexed: 11/07/2022]
Abstract
Ventricular assist devices (VADs) provide mechanical circulatory support to offload the work of one or both ventricles during heart failure. They are used in the clinical setting as destination therapy, as bridge to transplant, or more recently as bridge to recovery to allow for myocardial remodeling. Recent developments in computational simulation allow for detailed assessment of VAD hemodynamics for device design and optimization for both children and adults. Here, we provide a focused review of the recent literature on finite element methods and optimization for VAD simulations. As VAD designs typically fall into two categories, pulsatile and continuous flow devices, we separately address computational challenges of both types of designs, and the interaction with the circulatory system with three representative case studies. In particular, we focus on recent advancements in finite element methodology that have increased the fidelity of VAD simulations. We outline key challenges, which extend to the incorporation of biological response such as thrombosis and hemolysis, as well as shape optimization methods and challenges in computational methodology.
Collapse
Affiliation(s)
- Alison L Marsden
- Department of Mechanical and Aerospace Engineering, University of California San Diego, La Jolla, CA, USA
| | | | | | | |
Collapse
|
16
|
Stanfield JR, Selzman CH, Pardyjak ER, Bamberg S. Flow Characteristics of Continuous-Flow Left Ventricular Assist Devices in a Novel Open-Loop System. ASAIO J 2012; 58:590-6. [DOI: 10.1097/mat.0b013e31826dcbd9] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/25/2022] Open
|
17
|
Wu J, F. Antaki J, Verkaik J, Snyder S, Ricci M. Computational Fluid Dynamics-Based Design Optimization for an Implantable Miniature Maglev Pediatric Ventricular Assist Device. JOURNAL OF FLUIDS ENGINEERING 2012; 134. [PMCID: PMC3706182 DOI: 10.1115/1.4005765] [Citation(s) in RCA: 15] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/11/2011] [Revised: 01/03/2012] [Indexed: 05/21/2023]
Abstract
Computational fluid dynamics (CFD)-based design optimization was applied to achieve the finalized design of the PediaFlow® PF4, a magnetically levitated rotodynamic pediatric ventricular assist device. It features a streamlined blood-flow path with a single annular fluid passage between the rotor and the stationary housing. The resulting impeller is composed of a first-stage mixed-flow section having four blades at the conical nose region followed by a second-stage fully axial-flow section with three blades within the annular gap region. A stator with three inwardly-directed vanes is provided at the conical tail region to recover pressure and straighten the flow. CFD predictions of head and efficiency characteristics agreed remarkably well with the validation experimental data: with overprediction of head by <7 mmHg over the entire operational range and a slight overprediction in best efficiency by ∼1%. The new optimized PF4 extended the maximum flow range of the previous PF3 device by more than 100% to over 2.3 liter per minute (LPM) for the same range of operating speeds, and doubled the maximum hydraulic efficiency to ∼27%. Evaluation of hemolysis was performed by a Lagrangian particle-tracking technique with analysis of regional contributions to the overall blood damage. The simulation revealed that hemolysis increases with an increase in both the flow rate and rotor speed but not necessarily with just an increase in flow rate at a constant rotor speed. At the flow rate of 1.0 LPM and a head of 138 mmHg, PF4 has a hemolysis index of 0.0032 compared to 0.0058 produced by PF3 at the same flow rate with a head of 48 mmHg. Numerical simulation of radial fluid forces performed by the CFD model with an eccentric rotor revealed the presence of negative fluid stiffness that was monotonically related to both flow and speed. Finally, conjugate heat transfer analysis predicted temperature rise adjacent to the motor to be inversely proportional to the length, but not exceeding ∼2 °C over the intended range of operation. In conclusion, CFD-based design optimization greatly expedited and facilitated the completion of the PediaFlow® flow path and contributed to the system-wide optimization to produce a miniature maglev pump with exceptional hemocompatibility.
Collapse
Affiliation(s)
- Jingchun Wu
- Ph.D., Chief ScientistLaunchPoint Technologies, Inc.,5735 Hollister Ave., Suite B,Goleta, CA 93117e-mail:
| | - James F. Antaki
- PhD., ProfessorDepartment of Biomedical Engineeringand Computer Science,Carnegie Mellon University,700 Technology Drive, Suite 4321,Pittsburgh, PA 15213e-mail:
| | | | | | - Michael Ricci
- Vice President of Engineeringe-mail: Launch Point Technologies, Inc.,5735 Hollister Avenue, Suite B,Goleta, CA 93117
| |
Collapse
|
18
|
Taskin ME, Fraser KH, Zhang T, Gellman B, Fleischli A, Dasse KA, Griffith BP, Wu ZJ. Computational characterization of flow and hemolytic performance of the UltraMag blood pump for circulatory support. Artif Organs 2011; 34:1099-113. [PMID: 20626739 DOI: 10.1111/j.1525-1594.2010.01017.x] [Citation(s) in RCA: 62] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
The Levitronix UltraMag blood pump is a next generation, magnetically suspended centrifugal pump and is designed to provide circulatory support for pediatric and adult patients. The aim of this study is to investigate the hemodynamic and hemolytic characteristics of this pump using the computational fluid dynamics (CFD) approach. The computational domain for CFD analysis was constructed from the three-dimensional geometry (3D) of the UltraMag blood pump and meshed into 3D tetrahedral/hybrid elements. The governing equations of fluid flow were computationally solved to obtain a blood flow through the blood pump. Further, hemolytic blood damage was calculated by solving a scalar transport equation where the scalar variable and the source term were obtained utilizing an empirical power-law correlation between the fluid dynamic variables and hemolysis. To obtain mesh independent flow solution, a comparative examination of vector fields, hydrodynamic performance, and hemolysis predictions were carried out. Different sizes of tetrahedral and tetrahedral/hexahedral mixed hybrid models were considered. The mesh independent solutions were obtained by a hybrid model. Laminar and SST κ-ω turbulence flow models were used for different operating conditions. In order to pinpoint the most significant hemolytic region, the flow field analysis was coupled to the hemolysis predictions. In summary, computational characterization of the device was satisfactorily carried out within the targeted operating conditions of the device, and it was observed that the UltraMag blood pump can be safely operated for its intended use to create a circulatory support for both pediatric and adult-sized patients.
Collapse
Affiliation(s)
- M Ertan Taskin
- Department of Surgery, University of Maryland School of Medicine, Baltimore, MD 21201, USA
| | | | | | | | | | | | | | | |
Collapse
|
19
|
Antaki JF, Ricci MR, Verkaik JE, Snyder ST, Maul TM, Kim J, Paden DB, Kameneva MV, Paden BE, Wearden PD, Borovetz HS. PediaFlow™ Maglev Ventricular Assist Device: A Prescriptive Design Approach. CARDIOVASCULAR ENGINEERING (DORDRECHT, NETHERLANDS) 2010; 1:104-121. [PMID: 20544002 PMCID: PMC2882700 DOI: 10.1007/s13239-010-0011-9] [Citation(s) in RCA: 13] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/19/2022]
Abstract
This report describes a multi-disciplinary program to develop a pediatric blood pump, motivated by the critical need to treat infants and young children with congenital and acquired heart diseases. The unique challenges of this patient population require a device with exceptional biocompatibility, miniaturized for implantation up to 6 months. This program implemented a collaborative, prescriptive design process, whereby mathematical models of the governing physics were coupled with numerical optimization to achieve a favorable compromise among several competing design objectives. Computational simulations of fluid dynamics, electromagnetics, and rotordynamics were performed in two stages: first using reduced-order formulations to permit rapid optimization of the key design parameters; followed by rigorous CFD and FEA simulations for calibration, validation, and detailed optimization. Over 20 design configurations were initially considered, leading to three pump topologies, judged on the basis of a multi-component analysis including criteria for anatomic fit, performance, biocompatibility, reliability, and manufacturability. This led to fabrication of a mixed-flow magnetically levitated pump, the PF3, having a displaced volume of 16.6 cc, approximating the size of a AA battery and producing a flow capacity of 0.3-1.5 L/min. Initial in vivo evaluation demonstrated excellent hemocompatibility after 72 days of implantation in an ovine. In summary, combination of prescriptive and heuristic design principles have proven effective in developing a miniature magnetically levitated blood pump with excellent performance and biocompatibility, suitable for integration into chronic circulatory support system for infants and young children; aiming for a clinical trial within 3 years.
Collapse
Affiliation(s)
- James F. Antaki
- Biomedical Engineering, Carnegie Mellon University, Pittsburgh, PA, USA
| | | | | | | | | | - Jeongho Kim
- Carnegie Mellon University, Pittsburgh, PA, USA
| | | | | | - Bradley E. Paden
- LaunchPoint Technologies, Inc., Goleta, CA, USA
- University of California, Santa Barbara, CA, USA
| | - Peter D. Wearden
- Section of Pediatric Cardiothoracic Surgery of the Heart Lung and Esophageal Institute, Children’s Hospital of Pittsburgh, Pittsburgh, PA, USA
| | - Harvey S. Borovetz
- Department of Bioengineering, University of Pittsburgh, Pittsburgh, PA, USA
| |
Collapse
|
20
|
Shu F, Vandenberghe S, Antaki JF. The importance of dQ/dt on the flow field in a turbodynamic pump with pulsatile flow. Artif Organs 2009; 33:757-62. [PMID: 19775268 DOI: 10.1111/j.1525-1594.2009.00849.x] [Citation(s) in RCA: 16] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/26/2022]
Abstract
Fluid dynamic analysis of turbodynamic blood pumps (TBPs) is often conducted under steady flow conditions. However, the preponderance of clinical applications for ventricular assistance involves unsteady, pulsatile flow-due to the residual contractility of the native heart. This study was undertaken to demonstrate the importance of pulsatility and the associated time derivative of the flow rate (dQ/dt) on hemodynamics within a clinical-scale TBP. This was accomplished by performing flow visualization studies on a transparent model of a centrifugal TBP interposed within a cardiovascular simulator with controllable heart rate and stroke volume. Particle image velocimetry triggered to both the rotation angle of the impeller and phase of the cardiac cycle was used to quantify the velocity field in the outlet volute and in between the impeller blades for 16 phases of the cardiac cycle. Comparison of the unsteady flow fields to corresponding steady conditions at the same (instantaneous) flow rates revealed marked differences. In particular, deceleration of flow was found to promote separation within the outlet diffuser, while acceleration served to stabilize the velocity field. The notable differences between the acceleration and deceleration phases illustrated the prominence of inertial fluid forces. These studies emphasize the importance of dQ/dt as an independent variable for thorough preclinical validation of TBPs intended for use as a ventricular assist device.
Collapse
Affiliation(s)
- Fangjun Shu
- Department of Biomedical Engineering, Carnegie Mellon University, Pittsburgh, PA 15219, USA.
| | | | | |
Collapse
|
21
|
Zhang J, Taskin ME, Koert A, Zhang T, Gellman B, Dasse KA, Gilbert RJ, Griffith BP, Wu ZJ. Computational Design and In Vitro Characterization of an Integrated Maglev Pump-Oxygenator. Artif Organs 2009; 33:805-17. [DOI: 10.1111/j.1525-1594.2009.00807.x] [Citation(s) in RCA: 26] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/26/2022]
|
22
|
Kim NJ, Diao C, Ahn KH, Lee SJ, Kameneva MV, Antaki JF. Parametric study of blade tip clearance, flow rate, and impeller speed on blood damage in rotary blood pump. Artif Organs 2009; 33:468-74. [PMID: 19473143 DOI: 10.1111/j.1525-1594.2009.00754.x] [Citation(s) in RCA: 22] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
Phenomenological studies on mechanical hemolysis in rotary blood pumps have provided empirical relationships that predict hemoglobin release as an exponential function of shear rate and time. However, these relations are not universally valid in all flow circumstances, particularly in small gap clearances. The experiments in this study were conducted at multiple operating points based on flow rate, impeller speed, and tip gap clearance. Fresh bovine red blood cells were resuspended in phosphate-buffered saline at about 30% hematocrit, and circulated for 30 min in a centrifugal blood pump with a variable tip gap, designed specifically for these studies. Blood damage indices were found to increase with increased impeller speed or decreased flow rate. The hemolysis index for 50-microm tip gap was found to be less than 200-microm gap, despite increased shear rate. This is explained by a cell screening effect that prevents cells from entering the smaller gap. It is suggested that these parameters should be reflected in the hemolysis model not only for the design, but for the practical use of rotary blood pumps, and that further investigation is needed to explore other possible factors contributing to hemolysis.
Collapse
Affiliation(s)
- Nahn Ju Kim
- School of Chemical and Biological Engineering, Seoul National University, Seoul, Republic of Korea
| | | | | | | | | | | |
Collapse
|
23
|
Shu F, Parks R, Maholtz J, Ash S, Antaki JF. Multimodal Flow Visualization and Optimization of Pneumatic Blood Pump for Sorbent Hemodialysis System. Artif Organs 2009; 33:334-45. [DOI: 10.1111/j.1525-1594.2009.00724.x] [Citation(s) in RCA: 10] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/01/2022]
|
24
|
Antaki JF, Diao CG, Shu FJ, Wu JC, Zhao R, Kameneva MV. Microhaemodynamics within the blade tip clearance of a centrifugal turbodynamic blood pump. Proc Inst Mech Eng H 2008; 222:573-81. [PMID: 18595366 DOI: 10.1243/09544119jeim352] [Citation(s) in RCA: 16] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/18/2022]
Abstract
A persistent challenge facing the quantitative design of turbodynamic blood pumps is the great disparity of spatial scales between the primary and auxiliary flow paths. Fluid passages within journals and adjacent to the blade tips are often on the scale of several blood cells, confounding the application of macroscopic continuum models. Yet, precisely in these regions there exists the highest shear stress, which is most likely to cause cellular trauma. This disparity has motivated these microscopic studies to visualize the kinematics of the blood cells within the small clearances of a miniature turbodynamic blood pump. A transparent model of a miniature centrifugal pump having an adjustable tip clearance (50-200 microm) was prepared for direct optical visualization of the region between the impeller blade tip and the stationary housing. Synchronized images of the blood cells were obtained by a microscopic visualization system, consisting of an inverted microscope fitted with long-working-distance objective lens (40x), mercury lamp, and high-resolution charge-coupled device camera electronically triggered by the rotation of the impeller. Experiments with 7 microm fluorescent particles revealed the influence of the gap dimension on the trajectory across the blade thickness. The lateral component of velocity (perpendicular to the blade) was dramatically enhanced in the 50 microm gap compared with the 200 microm gap, thereby reducing the exposure time. Studies with diluted bovine blood (Ht = 0.5 per cent) showed that the concentration of cells traversing the gap is also reduced dramatically (30 per cent) as the blade tip clearance is reduced from 200 microm to 50 microm. These results motivate further investigation into the microfluidic phenomena responsible for cellular trauma within turbodynamic blood pumps.
Collapse
Affiliation(s)
- J F Antaki
- Department of Biomedical Engineering, Carnegie Mellon University, Pittsburgh 15219, USA.
| | | | | | | | | | | |
Collapse
|
25
|
Zhang J, Gellman B, Koert A, Dasse KA, Gilbert RJ, Griffith BP, Wu ZJ. Computational and experimental evaluation of the fluid dynamics and hemocompatibility of the CentriMag blood pump. Artif Organs 2006; 30:168-77. [PMID: 16480391 DOI: 10.1111/j.1525-1594.2006.00203.x] [Citation(s) in RCA: 96] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/01/2022]
Abstract
The CentriMag centrifugal blood pump is a newly developed ventricular assist device based on magnetically levitated bearingless rotor technology. A combined computational and experimental study was conducted to characterize the hemodynamic and hemocompatibility performances of this novel blood pump. Both the three-dimensional flow features of the CentriMag blood pump and its hemolytic characteristics were analyzed using computational fluid dynamics (CFD)-based modeling. The hydraulic pump performance and hemolysis level were quantified experimentally. The CFD simulation demonstrated a clean and streamlined flow field in the main components of the CentriMag blood pump. The predicted results by hemolysis model indicated no significant high shear stress regions in the pump. A comparison of CFD predictions and experimental results showed good agreements. The relatively large gap passages (1.5 mm) between the outer rotor walls and the lower housing cavity walls provide a very good surface washing through a secondary flow path while the shear stresses in the secondary flow paths are reduced, resulting in a low rate of hemolysis ([Normalized Index of Hemolysis] NIH = 0.0029 +/- 0.006) without a decrease of the pump's hydrodynamic performance (pressure head: 352 mm Hg at a flow rate of 5.0 L/min and a rotational speed of 4,000 rpm).
Collapse
Affiliation(s)
- Juntao Zhang
- Artificial Organs Laboratory, Department of Surgery, University of Maryland School of Medicine, Baltimore, 21201, USA
| | | | | | | | | | | | | |
Collapse
|
26
|
Uber BE, Webber SA, Morell VO, Antaki JF. Hemodynamic Guidelines for Design and Control of a Turbodynamic Pediatric Ventricular Assist Device. ASAIO J 2006; 52:471-8. [PMID: 16883130 DOI: 10.1097/01.mat.0000227730.00085.36] [Citation(s) in RCA: 9] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/26/2022] Open
Abstract
The design of mechanical circulatory support devices typically requires a priori knowledge of the hemodynamic requirements of their intended use. These requirements are difficult to determine because of limited clinical experience. This is especially true for the pediatric population, for whom there is a dearth of longitudinal data. This report aims to provide both engineers and physicians with benchmarks for determining the optimal flow requirements and settings for pediatric ventricular assist devices that are currently being developed. Criteria were developed on the basis of estimates derived from various sources. The potential patient population was estimated by using the prevalence of children on the heart transplant waiting list and those placed on extracorporeal membrane oxygenation. Cardiac outputs were determined for individual weights and body surface areas, using published values for healthy and sick pediatric patients. The recommended pump range was optimized to include the most patients, while considering the design constraints. This study identifies a significant population of patients who would benefit from a device providing 0.52 to 1.92 l/min.
Collapse
|
27
|
Wu ZJ, Gartner M, Litwak KN, Griffith BP. Progress toward an ambulatory pump-lung. J Thorac Cardiovasc Surg 2005; 130:973-8. [PMID: 16214507 DOI: 10.1016/j.jtcvs.2005.04.032] [Citation(s) in RCA: 17] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 02/17/2005] [Revised: 04/13/2005] [Accepted: 04/22/2005] [Indexed: 11/24/2022]
Abstract
OBJECTIVES Currently available therapies for acute and chronic lung diseases have not been effective and have various problems associated with the technologies used. We present a novel active mixing pump-lung with the goal of providing total respiratory support to ambulatory patients. METHODS The pump-lung is based on the concept of active mixing oxygenation within a constrained vortex. The rotation of hollow-fiber membranes disrupts the concentration boundary layer, increasing gas exchange efficiency, and simultaneously pumps the blood. Consequently, the amount of membranes required to achieve gas transfer sufficient for total respiratory support is considerably small. A series of studies, including computational design, experimental bench testing, and in vivo animal experiments, have been performed to implement this concept into a viable artificial pump-lung device. RESULTS A series of pump-lung prototypes with a membrane surface area of 0.17 to 0.5 m2 were designed and characterized in vitro with bovine blood, demonstrating extremely high gas exchange efficiency. The prototype with a gas exchange surface area of 0.5 m2 was evaluated in calves. The device provided oxygen transfer of approximately 115 mL/min for respiratory support of an animal for up to 5 days. CONCLUSIONS Progress to date suggests a high likelihood of success for an extracorporeal shorter-term lung that can be switched in and out like dialysis devices. Our device is unique in that it incorporates an integrated pumping and active mixing principle for excellent gas transfer and eliminates the need of the native right ventricle's ability to power blood through the artificial and natural lungs.
Collapse
Affiliation(s)
- Zhongjun J Wu
- Department of Surgery, University of Maryland, Baltimore, Md 21201, USA
| | | | | | | |
Collapse
|
28
|
Day SW, McDaniel JC. PIV measurements of flow in a centrifugal blood pump: time-varying flow. J Biomech Eng 2005; 127:254-63. [PMID: 15971703 DOI: 10.1115/1.1865190] [Citation(s) in RCA: 13] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
Measurements of the time-varying flow in a centrifugal blood pump operating as a left ventricular assist device (LVAD) are presented. This includes changes in both the pump flow rate as a function of the left ventricle contraction and the interaction of the rotating impeller and fixed exit volute. When operating with a pulsing ventricle, the flow rate through the LVAD varies from 0-11 L/min during each cycle of the heartbeat. Phase-averaged measurements of mean velocity and some turbulence statistics within several regions of the pump, including the inlet, blade passage, exit volute, and diffuser, are reported at 20 phases of the cardiac cycle. The transient flow fields are compared to the constant flow rate condition that was reported previously in order to investigate the transient effects within the pump. It is shown that the quasi-steady assumption is a fair treatment of the time varying flow field in all regions of this representative pump, which greatly simplifies the comprehension and modeling of this flow field. The measurements are further interpreted to identify the effects that the transient nature of the flow field will have on blood damage. Although regions of recirculation and stagnant flow exist at some phases of the cardiac cycle, there is no location where flow is stagnant during the entire heartbeat.
Collapse
Affiliation(s)
- Steven W Day
- Section of Evolution & Ecology, University of California, One Shields Avenue, Davis, CA 95616, USA.
| | | |
Collapse
|
29
|
Eash HJ, Frankowski BJ, Hattler BG, Federspiel WJ. Evaluation of local gas exchange in a pulsating respiratory support catheter. ASAIO J 2005; 51:152-7. [PMID: 15839440 PMCID: PMC2002489 DOI: 10.1097/01.mat.0000153648.11692.d0] [Citation(s) in RCA: 9] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/25/2022] Open
Abstract
An intravenous respiratory support catheter, the next generation of artificial lungs, is being developed in our laboratory to potentially support acute respiratory failure or patients with chronic obstructive pulmonary disease with acute exacerbations. A rapidly pulsating 25 ml balloon inside a bundle of hollow fiber membranes facilitates supplemental oxygenation and CO2 removal. In this study, we hypothesized that non-uniform gas exchange in different regions of this fiber bundle was present because of asymmetric balloon collapse and the interaction of longitudinal flow. Four quarter regions and two rings around the central balloon were selectively perfused to evaluate local gas exchange in a 3.18 cm test section using helium as the sweep gas. Quarter region CO2 exchange rates at 400 beats per minute were 156.8 +/- 0.8, 162.5 +/- 1.8, 157.2 +/- 0.2, and 196.6 +/- 0.8 ml/min/m2 (top, front, bottom, and back, respectively). The back section, adjacent to convex balloon collapse, had 17-20% higher exchange than the other sections caused by higher relative velocities past its stationary fibers. Inner and outer ring maximum pulsation gas exchange rates were 174.4 +/- 1.8 and 174.6 +/- 0.9 ml/min/m2, respectively, showing that fluid flow was equally distributed throughout the fiber bundle.
Collapse
Affiliation(s)
- Heide J Eash
- Artificial Lung Laboratory, McGowan Institute for Regenerative Medicine, University of Pittsburgh, Pennsylvania 15203, USA
| | | | | | | |
Collapse
|
30
|
Weller GER, Villanueva FS, Tom EM, Wagner WR. Targeted ultrasound contrast agents: In vitro assessment of endothelial dysfunction and multi-targeting to ICAM-1 and sialyl Lewisx. Biotechnol Bioeng 2005; 92:780-8. [PMID: 16121392 DOI: 10.1002/bit.20625] [Citation(s) in RCA: 118] [Impact Index Per Article: 6.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
Abstract
An ultrasound-based molecular imaging technique capable of detecting endothelial cell markers of inflammation may allow early, non-invasive assessment of vascular disease. Clinical application of targeted, acoustically-active microbubbles requires optimization of microbubble-endothelial adhesion strength to maximize image signal-to-noise ratio, as well as the ability to discern the degree of inflammation along a continuum of dysfunction. Accordingly, we hypothesized that adhesion of intercellular adhesion molecule-1 (ICAM-1)-targeted microbubbles is dependent on the degree of endothelial inflammation, and that microbubbles multi-targeted to both ICAM-1 (via anti-ICAM-1 antibodies) and selectins (via sialyl Lewisx) demonstrate greater adhesion strength than microbubbles targeted to either inflammatory marker alone. In a radial flow chamber, microbubbles were perfused across endothelial cells activated with interleukin-1beta to four different levels of inflammation, as assessed by quantitative ICAM-1 expression. ICAM-1-targeted microbubble adhesion strength increased with increasing degree of inflammation, with a relationship that was both positive and linear (r > 0.99). Microbubble adhesion strength was significantly higher for the multi-targeted microbubbles than either of the single-targeted microbubbles. These data thus demonstrate that multi-targeting of contrast microbubbles may offer improved adhesion characteristics, allowing for greater sensitivity to inflammation. Furthermore, the adhesion strength of targeted microbubbles is linearly dependent on the degree of inflammation, suggesting that targeted ultrasound imaging may offer differentiation between various degrees of endothelial dysfunction, and thus detect not only the presence, but also the severity of inflammatory disease processes.
Collapse
Affiliation(s)
- Gregory E R Weller
- Department of Bioengineering, University of Pittsburgh, Pittsburgh, Pennsylvania 15213, USA
| | | | | | | |
Collapse
|
31
|
Tsukiya T, Taenaka Y, Tatsumi E, Takano H. Visualization study of the transient flow in the centrifugal blood pump impeller. ASAIO J 2002; 48:431-6. [PMID: 12141476 DOI: 10.1097/00002480-200207000-00018] [Citation(s) in RCA: 9] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/25/2022] Open
Abstract
Rotary blood pumps as a left ventricular assist device have several advantages over the use of existing pulsatile devices used for this purpose. The relative velocity distribution to the rotating impeller was observed by high-speed videography and particle image velocimetry (PIV) with the purpose of characterizing the unsteady fluid motion in the impeller and assessing antithrombogenicity based on the fluid dynamic properties within the flow path. Flow visualization in the present study has clearly shown the existence of drastic transient motion of flows in the impeller. The secondary flows developed in the passage, which are adverse in terms of hydrodynamic efficiency, contributed to the washout conditions on the blood contacting surface.
Collapse
Affiliation(s)
- Tomonori Tsukiya
- Department of Artificial Organs, National Cardiovascular Center, Osaka, Japan
| | | | | | | |
Collapse
|
32
|
Tsukiya T, Taenaka Y, Tatsumi E, Takano H. Improvement of washout flow in a centrifugal blood pump by a semi-open impeller. ASAIO J 2002; 48:76-82. [PMID: 11814101 DOI: 10.1097/00002480-200201000-00015] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/25/2022] Open
Abstract
To reduce the possible thrombogenicity of the pump studied, pump characteristics and washout conditions were compared between a pump with a semi-open and a pump with a full-open impeller. A difference in hydrodynamic performance was observed between the semi-open impeller and the full-open impeller; the pressure in the former was less by approximately 10%, and the maximum attainable efficiency decreased from 0.41 to 0.34. The flow pattern, as visualized by the oil film method, showed that the washout condition was enhanced by addition of the shroud, especially at the bottom region of the pump where the blood flow tended to be stagnant. The stagnant area was observed in the suction side of the impeller in both models, where the vortices shed from the impeller tip contributed to the washout. It was also shown that the flow entering the bottom region was circumferentially uniform in the full-open impeller, whereas in the semi-open impeller the flow was not uniform and entered primarily from the vicinity of the outlet port. The semi-open impeller, thus, was demonstrated to have better washout conditions than the full-open impeller regardless of a slight decrease in hydrodynamic efficiency.
Collapse
Affiliation(s)
- Tomonori Tsukiya
- Department of Artificial Organs, National Cardiovascular Center of Japan
| | | | | | | |
Collapse
|