Internal fixation of unstable pelvic ring injuries

Screw fixation of superior pubic ramus fractures using a modified technique with a pre-bent guidewire in curved transpubic corridors - A non-inferiority pilot study

INTRODUCTION

Transpubic screw fixation is a valuable option for stabilization of superior pubic ramus fractures. However, insertion of a transpubic screw can be challenging or sometimes even impossible due to a narrow or curved transpubic screw corridor, which is present in 38 % of cases. To overcome this problem, a modified technique for insertion of a transpubic screw by advancing a pre-bent guidewire in an ESIN-like fashion is described.

MATERIALS AND METHODS

A retrospective, non-inferiority pilot study with patients, who received a transpubic screw, was performed to investigate potential procedure-associated complications as well as short-term radiological and clinical outcomes of the modified technique in comparison to the classical technique for insertion.

RESULTS

From 01/2021 to 04/2024, 24 transpubic screws were inserted at two major trauma centers, of which nine screws were inserted using the modified technique. Ten patients with a total of eleven transpubic screws (modified technique: 5; classical technique: 6) were available for this pilot study. One patient from the modified technique subgroup experienced a screw migration without affecting fracture healing and without necessitating hardware removal. The complication rate of the modified technique was not significantly inferior to the classical technique (p = 0.50). Residual displacement of the pubic ramus fracture was not significantly inferior using the modified technique compared to the classical technique (modified: 5.0 ± 2.2 mm; classical 4.4 ± 3.3 mm; p = 0.38). The clinical outcome was not significantly inferior using the modified technique compared to the classical technique regarding VAS pain (modified: 2.4 ± 4.3; classical 2.6 ± 2.5; p = 0.47), VAS satisfaction (modified: 8.8 ± 1.8; classical 9.0 ± 1.0; p = 0.42) and Majeed score (modified: 82.0 ± 12.6; classical 90.0 ± 12.5; p = 0.17).

CONCLUSION

The modified technique for insertion of a transpubic screw using a pre-bent guidewire is feasible in narrow and particularly curved transpubic corridors. It was not inferior compared to the classical technique regarding complications as well as short-term radiological and clinical outcomes.

Association between sacroiliac joint reduction quality and acetabular fracture alignment: a comparative study of the lateral window and pararectus approaches

PURPOSE

Simultaneous ipsilateral sacroiliac joint (SIJ) injury and acetabular fracture are relatively common. Inadequate SIJ reduction may compromise the anatomical alignment of associated acetabular fractures. However, the optimal surgical approach for managing both injuries remains uncertain. In this study, we aimed to compare the efficacy of pelvic ring injury reduction using either the lateral window or the pararectus approach and to analyze associated radiological outcomes in patients with concurrent SIJ injury and acetabular fracture.

METHODS

This retrospective study included 44 patients who underwent open reduction and internal fixation (ORIF) for SIJ injury. Patients were divided into two groups based on the surgical approach: L group (lateral window of the ilioinguinal approach) and P group (pararectus approach). A subgroup of patients with simultaneous ipsilateral SIJ injury and acetabular fracture was selected for comparative analysis using postoperative computed tomography (CT) to assess SIJ reduction and acetabular fracture alignment.

RESULTS

Improvements in SIJ distance on axial and coronal CT planes were observed in both groups, with greater reductions observed in the P group. Among patients with combined injuries, the P group demonstrated significantly improved SIJ reduction in the coronal plane (P = 0.008), which was associated with smaller residual fracture gaps and articular step-offs in the axial, coronal, and sagittal planes.

CONCLUSION

When ORIF is indicated for SIJ injury, the pararectus approach may offer enhanced SIJ reduction in the coronal plane. This technique is also associated with improved acetabular fracture alignment in patients with simultaneous ipsilateral injuries.

Single versus double symphyseal plating in management of tile C1-2 and C1-3 pelvic ring injuries: a randomized controlled trial

BACKGROUND

Single superior symphyseal plating is the most effective method for managing vertically unstable Tile C1-2 and C1-3 pelvic ring injuries. However, high rates of implant failure were more frequently observed in obese patients (body mass index < 30). The study aimed to determine the potential reduction in implant failure rates by adding an anterior symphyseal plate in obese patients (class I).

METHODS

The study was designed as a prospective, randomized controlled trial with a single-blind methodology, conducted at a level 1 trauma center. The study involved 36 patients with Tile C1-2 and C1-3 injuries, and class I obesity between February 2022 and May 2023. All cases had posterior and anterior ring fixation, with 18 cases having superior symphyseal plating and 18 cases having additional anterior plating (Groups A and B). The primary outcomes were radiological, functional outcomes, and implant failure rates.

RESULTS

Patients in group A were followed up for an average of 13.39 months, and those in group B for 13.7 months. Group A exhibited a significantly shorter operative time with a mean difference of 30 min (p < 0.001), as well as lower reoperation rates (p = 0.03). Both groups had similar final clinical and radiological outcomes (p = 0.44 and 0.78) and implant failure rates (p = 0.18) at the last follow-up.

CONCLUSION

The authors found that using a single high-quality symphyseal plate effectively addresses symphyseal diastasis in vertically unstable Tile C1-2 and C1-3 pelvic ring injuries among patients with class I obesity. This method lowers morbidity by reducing operation times and minimizing reoperation rates, while the inclusion of an additional anterior plate does not enhance the final radiological and clinical outcomes.

LEVEL OF EVIDENCE

Therapeutic Level I study.

TRIAL REGISTRATION

Ain Shams University's ethical committee retrospectively registered and approved this trial (FWA 000017585 FMASU R65/2022). It was organized and operated according to the guidelines of the International Council on Harmonization (ICH) in Anesthesiology and the Islamic Organization for Medical Sciences (IOMS). The United States Office for Human Research Protections and the United States Code of Federal Regulations operate under Federal Wide Assurance No. 000017585 (retrospectively registered). Our study was registered at ClinicalTrials.gov with clinical trial number NCT06439108 with clinical trial registry ({05/30/2024}.

Analysis of risk factors affecting the prognosis of external fixation in the treatment of unstable pelvic fractures in children: a retrospective study of 96 patients

BACKGROUND

To investigate the efficacy of external fixation in treating unstable pelvic fractures in children and identify risk factors for poor prognosis.

METHODS

A retrospective study was conducted on children with unstable pelvic fractures treated surgically at our hospital from January 2006 to June 2022. All patients received external fixation, and those with vertical instability underwent postoperative limb traction. Data collected included gender, age, injury mechanism, associated injuries, imaging results, operation time, blood loss, pelvic reduction status, complications, and functional recovery. Variables were analyzed using multiple linear regression to explore risk factors for poor prognosis.

RESULTS

The study included 96 patients (62 males, 34 females) with an average age of 95.7 ± 50.3 months. Injury mechanisms were mainly traffic accidents (82.3%) and falls (14.6%). There were 47 cases of Tile B fractures and 49 cases of Tile C fractures. Surgeries were successful with an average operation time of 55.6 ± 27.3 min and blood loss of 6.3 ± 4.7 ml. Immediate postoperative Matta reduction quality was excellent in 91.7% of cases. Postoperatively, 46 patients underwent limb traction for an average of 9.3 ± 1.4 weeks. The average follow-up duration was 29.3 ± 11.7 months, and fracture healing time was 8.6 ± 1.1 weeks. At the final follow-up, 83.3% had excellent or good Cole pelvic function scores. WeeFIM scores indicated complete independence in 71 cases, conditional independence in 13, and conditional dependence in 12. Multiple linear regression identified age, Tile classification, and immediate postoperative displacement as independent predictors of prognosis. Patients aged ≥ 13 years, with Tile C fractures, and immediate postoperative displacement ≥ 8 mm had lower Cole scores.

CONCLUSIONS

External fixation combined with lower limb traction effectively treats unstable pelvic fractures in children, with most patients having a favorable prognosis. Assessment of age, fracture type, and reduction quality is essential. Enhanced postoperative follow-up and functional exercises are recommended for older children, those with Tile C fractures, and those with significant immediate postoperative displacement. Clinicians should consider these factors to improve outcomes.

LEVEL OF EVIDENCE

III.

Comparative Efficacy of Retrograde Pubic Ramus Intramedullary Nails and Percutaneous Cannulated Screws in Treating Anterior Pelvic Ring Fractures: A Retrospective Cohort Study

OBJECTIVE

To compare the clinical outcomes of retrograde pubic ramus intramedullary nail (RPRIN) and percutaneous cannulated screw (PCS) in the treatment of anterior pelvic ring fractures (APRFs).

METHODS

This retrospective cohort study included 45 patients with APRFs treated between February 2019 and October 2022 in our trauma center. Patients were divided into two groups based on the surgical method: 20 received RPRIN fixation, and 25 received PCS fixation. Key variables including operation time, fluoroscopic time, blood loss, and postoperative complications were analyzed. Fracture reduction quality was assessed using the Matta score system, and pelvic functional recovery was evaluated using the Majeed score system at the final follow-up. Quantitative variables were compared using the independent sample t test, while categorical variables were analyzed using Chi-square and Fisher's exact tests.

RESULTS

The RPRIN group had significantly shorter operation time (36.3 ± 5.6 min vs. 49.5 ± 6.9 min, P < 0.01), fluoroscopic time (32.0 ± 2.8 s vs. 48.4 ± 3.6 s, P < 0.01), and less blood loss (20.4 ± 7.6 mL vs. 34.0 ± 5.7 mL, P < 0.01) than the PCS group. Fracture reduction quality (Matta outcome) and pelvic functional recovery (Majeed outcome) were comparable between the two groups (P > 0.05). No significant complications were reported in either group.

CONCLUSIONS

Both RPRIN and PCS are effective for treating APRFs. However, RPRIN offers distinct advantages by reducing operation time, fluoroscopic time, and blood loss, making it a more efficient and less invasive option. Further multicenter studies and biomechanical analyses are warranted to confirm these findings.

Simplifying the Orientation of S1 Iliosacral Screws for Placement in the Dysmorphic Sacrum

BACKGROUND

Determining the proper iliosacral screw orientation in a dysmorphic S1 sacral segment using a C-arm is difficult, and pelvic computed tomography (CT) is often necessary for the preoperative planning. On the preoperative pelvic axial CT section, the intended screw trajectory can be delineated intraosseously along the axis of the oblique osseous corridor. An inherently accurate orientation would be determined by 2 factors: (1) the trajectory is in the pelvic transverse plane, and (2) it is oriented relative to the coronal plane at a patient-specific angle, which should be measured preoperatively. Based on the above reasoning, we aimed to simplify and verify the orientation.

METHODS

After establishing the starting point on the sacral lateral view, we tested a method of simplifying the guidewire orientation: placing the guidewire in the pelvic transverse plane and then manipulating it to be angled relative to the coronal plane at the preoperatively measured patient-specific angle. The guidewire orientation should then be reproducibly accurate on the pelvic outlet and inlet views. The feasibility and safety of our method were verified through computer-simulated virtual surgical procedures in 95 dysmorphic sacra and clinical surgical procedures in 12 patients. The primary outcome parameters were the guidewire orientation and screw placement accuracy.

RESULTS

Using our method, the S1 guidewire orientation was reproducibly accurate on the pelvic outlet and inlet views in all of the virtual and clinical surgical procedures. Ninety-five virtual S1 screws (1 screw in each left hemipelvis) were placed intraosseously in the pelvic transverse plane. Fourteen unilateral S1 screws were placed intraosseously in the pelvic transverse plane in the 12 patients (2 patients had double screws) without iatrogenic injuries.

CONCLUSIONS

The guidewire orientation can be simplified by placing the guidewire in the pelvic transverse plane and replicating the preoperatively measured patient-specific angle between the guidewire and the coronal plane. After establishing the starting point on the sacral lateral view, our simplified manipulation yields a reproducibly accurate orientation on the pelvic outlet and inlet views.

LEVEL OF EVIDENCE

Therapeutic Level III . See Instructions for Authors for a complete description of levels of evidence.

Closed Reduction and Minimally Invasive Fixation for the Treatment of Bilateral Displaced Posterior Pelvic Ring Disruption

OBJECTIVE

Close reduction and internal fixation have gained popularity for the treatment of pelvic fractures. However, the closed reduction of bilateral displaced posterior pelvic ring disruption is a great challenge even for the most experienced surgeon. In this study, we describe in detail a novel unlocking closed reduction technique (UCRT) frame that allows strong traction for bilateral posterior pelvic ring displacement and presents preliminary clinical outcomes.

METHODS

We retrospectively reviewed 32 patients with bilateral displaced posterior pelvic ring disruptions (AO/OTA 61-C2 and C3) who were initially treated with this technique between July 2017 and July 2022. According to the AO/OTA classification, there were 9 cases (28.12%) of 61-C2, and 23 cases (71.88%) of 61-C3. There were 11 males, 21 females, with an average age of 38.1 years. The interval from injury to operation was 4-27 days, with a cut-off of 12.5 days (receiver operating characteristic curve). Operative time, blood loss, and postoperative radiographic findings were recorded. The functional outcomes and complications were followed.

RESULTS

A total of 30 (93.8%) patients achieved successful closed reduction, whereas 2 required open reduction. The successful closed reduction rate was 95.5% (21/22) in patients whose injury-to-operation time was less than 12.5 days. The vertical displacement percent correction of the obviously displaced hemipelvis was 70.20% ± 16.79% on average. The average degree of pelvic deformity correction was 64.86% ± 17.71%. Thirty patients were followed up for at least 12 months (12-36 months), and no complications of nonunion or redisplacement were observed. The Matta-Tornetta scoring standard revealed that the excellent (25/30) and good (4/30) rate was 96.7%. The Majeed clinical efficacy score revealed that the overall excellent and good rate was 100%. One patient had INFIX-related infection, and 2 reported numbness in the lateral thigh. The numbness was improved after INFIX removal.

CONCLUSIONS

This study presents an updated technique for closed reduction using a UCRT frame for bilateral posterior pelvic ring disruption, which has been shown to be effective, as indicated by excellent surgical and functional outcomes.

Bilateral Iliosacral and Transsacral Screws Are Biomechanically Favorable and Reduce the Risk for Fracture Progression in Fragility Fractures of the Pelvis-A Finite Element Analysis

(1) Background: The incidence of fragility fractures of the pelvis (FFP) has increased significantly over the past decades. Unilateral non-displaced fractures, defined as FFP II, are the most common type of fracture. When conservative treatment fails, surgical treatment is indicated. We hypothesize that the use of bilateral SI screws (BSIs) or a transsacral screw (TSI) is superior compared to a unilateral screw (USI) because of a significant reduction in the risk of adjacent fractures and a reduction in fracture progression. (2) Methods: A finite element model of a female pelvic ring was constructed. The ligaments were simulated as tension springs. The load was applied through the sacrum with the pelvis fixed to both acetabula. An FFP IIc was simulated and fixed with either a USI or BSI or TSI. The models were analyzed for a quantitative statement of stress and fracture dislocation. (3) Results: The BSI and TSI resulted in less dislocation compared to the USI. The stress distribution on both sides of the sacrum was favorable in the BSI and TSI groups. The BSI resulted in a higher rotational stability compared to the TSI. (4) Conclusions: The use of either a BSI or TSI for fixation of unilateral FFP is biomechanically favorable compared to the use of a USI. In addition, the use of a BSI or TSI reduces the stress on the contralateral uninjured side of the sacrum. This may reduce the risk of an adjacent fracture or fracture progression.

An End-to-End Geometry-Based Pipeline for Automatic Preoperative Surgical Planning of Pelvic Fracture Reduction and Fixation

Computer-assisted preoperative planning of pelvic fracture reduction surgery has the potential to increase the accuracy of the surgery and to reduce complications. However, the diversity of the pelvic fractures and the disturbance of small fracture fragments present a great challenge to perform reliable automatic preoperative planning. In this paper, we present a comprehensive and automatic preoperative planning pipeline for pelvic fracture surgery. It includes pelvic fracture labeling, reduction planning of the fracture, and customized screw implantation. First, automatic bone fracture labeling is performed based on the separation of the fracture sections. Then, fracture reduction planning is performed based on automatic extraction and pairing of the fracture surfaces. Finally, screw implantation is planned using the adjoint fracture surfaces. The proposed pipeline was tested on different types of pelvic fracture in 14 clinical cases. Our method achieved a translational and rotational accuracy of 2.56 mm and 3.31° in reduction planning. For fixation planning, a clinical acceptance rate of 86.7% was achieved. The results demonstrate the feasibility of the clinical application of our method. Our method has shown accuracy and reliability for complex multi-body bone fractures, which may provide effective clinical preoperative guidance and may improve the accuracy of pelvic fracture reduction surgery.

Is patient-reported outcome after treatment of unstable pelvic ring injuries related to pelvic symmetry? A prospective study

PURPOSE

To determine the relation between pelvic symmetry, as measured by the cross-measurement technique, and patient-reported outcome measures (PROMs) in terms of functional status and health-related quality of life.

METHODS

In this prospective cohort study, X and Y measurements were taken according to the cross-measurement technique on AP radiographs of patients who were treated for an unstable pelvic ring injury in a level-1 trauma center. Patients completed PROMs at the time of admission (recalled pre-injury score) and one year following their injury, reporting their functional status with the Short Musculoskeletal Function Assessment (SMFA-NL), specifically the lower extremity dysfunction (LED), problems with daily activities (PDA) and mental and emotional problems (MEP) subscales, and quality of life with EuroQol-5D (EQ-5D). Subgroup analyses were also performed. PROMs were used to analyze the relation between pelvic symmetry and patient-reported outcome, using Spearman's Rank correlation coefficients.

RESULTS

A total of 130 patients (mean age 58 (SD18) years) with an unstable pelvic ring injury were included, of which 95 (73%) sustained type-B injuries and 35 (27%) type-C injuries. Sixty-three (49%) patients were treated operatively. The median pelvic symmetry ratio was 1.01 (IQR: 0.05). Weak or no correlations were found between the pelvic symmetry scores and the outcome measurements (Spearman's correlation coefficients: LED r = 0.09; PDA r = 0.11; MEP r=-0.02; and EQ-5D r=-0.08). Subgroup analyses revealed no correlations.

CONCLUSIONS

No significant relation was found between pelvic symmetry, measured radiologically, and functional status and health-related quality of life, one year following an unstable pelvic ring injury.

Functional and Radiological Outcome of Anterior Plate Stabilisation of the Sacroiliac Joint in Unstable Pelvic Injury

Introduction

Sacroiliac joint disruption, resulting from high energy trauma can cause significant morbidity if no proper treatment given. Many techniques can be used to stabilise pelvic ring injuries. We studied the functional and radiological outcome following open reduction and anterior fixation of the sacroiliac joint and agreement between both outcomes.

Material and Methods

This retrospective study involved 15 patients with unstable pelvic injuries requiring surgical intervention from January 2015 to December 2020 who undergone anterior stabilisation of the sacroiliac joint. Radiological outcome assessments were done postoperatively by using Lindahl criteria. The complete functional outcome was assessed at least six months postoperatively when patients were able to weight bear by using Majeed system. Descriptive statistical analysis was performed using IBM SPSS Statistics Version 27.

Results

The participants consist of 73.3% male and 26.7% female patients. A total of 66.7% of patients had a Tile type B pelvic ring injury, and the remaining 33.3% had a Tile type C pelvic ring injury. Based on the Majeed system, 73.3% of patients had excellent functional outcomes, and based on Lindahl criteria; there were 60% of patients who had excellent radiological outcome. However, there was no significant agreement between functional and radiological outcomes.

Conclusion

Definitive fixation of the sacroiliac joint by anterior plate stabilisation provided an excellent functional and radiological outcome mainly due to good anatomical reduction and mechanical stability. However, further study may be needed to evaluate the correlation between functional and radiological outcomes and compare the various method of fixation with a larger sample size.

Innovative development of robot reduction system in geriatric pelvic fractures: A single-center case series in Beijing, China

Displaced fragility fractures of the pelvis (FFP) pose significant challenges in orthopaedic trauma, owing to patient comorbidities, deteriorating bone quality, and surgical complexities. Despite technological advancements, no robotic methods have been documented for displaced FFP management. To address this, we introduced an advanced robot-assisted fracture reduction system, comprising a tracking device, path planning software, and robotic arms. This study evaluated fifteen consecutive patients with displaced FFP (average age 80.4 ± 9.1 years), who underwent robot-assisted reduction and internal fixation (RARIF) between January 2022 and May 2023. All were categorized as Rommens FFP type III, with a median time of 6 days (range 4-11) from injury to surgery. Operative times averaged 165 ± 44 min, with median blood loss of 50 mL. Postoperative radiographs showed all patients achieved excellent or good reductions as per Matta criteria, marking a 100 % success rate. A 6-month follow-up revealed an average modified Majeed score of 81.4, with 85.7 % of patients rated excellent or good. All fractures healed without complications. Leveraging our intelligent system, RARIF proves to be a safe and effective approach for displaced FFP, facilitating postoperative pain alleviation and early mobilization despite compromised health and bone conditions. This approach may revolutionize the management of FFP in an increasingly aging population, signaling a significant shift in therapeutic strategies. Translational Potential of this Article: Elderly patients with displaced FFP often present complex surgical challenges due to comorbidities and poor bone quality, complicating reduction procedures and often leading to ineffective fixation. Addressing these challenges, we have developed an innovative robot-assisted fracture reduction system, offering a practical alternative to conventional methods. This system optimizes the applied force and direction during the reduction process, thereby reducing the needs for manual and repetitive attempts. Our report, detailing the successful implementation of this technique in 15 FFP cases, signifies a considerable leap forward in the field of orthopaedic surgery. This technique notably benefits the elderly population, a group traditionally marginalized in receiving care for complex orthopedic conditions.

Anterior Approach for Fixation of Acetabular Fractures Using Anatomically Designed Plates: Maintenance of Reduction and Functional Outcomes at a Minimum Five-Year Follow-Up

Background Acetabular fractures with quadrilateral plate involvement have been shown to have a high rate of complications. Anatomic suprapectineal plating systems have been developed to manage these injuries with good short-term outcomes. However, long-term maintenance of anatomical reduction and functional outcomes has yet to be established. The aim of this study is to maintain reduction and functional outcomes at a minimum of five years of follow-up. Materials and methods This is a retrospective cohort study from a prospective database examining patients aged over 16 years following fixation of acetabular fractures with quadrilateral plate involvement at a trauma center in the United Kingdom. All patients had acetabular fracture fixation with an anatomically designed suprapectineal plate. Patients were admitted from March 2014 to January 2017. Primary outcomes included objective radiological outcomes such as reduction quality, maintenance of reduction, and subjective patient-related outcome measures (PROMs) using the Oxford Hip Score (OHS) and EuroQol EQ5D Score at a minimum of five years post-operatively. Secondary outcomes recorded included metalwork failure and complications such as reoperation, neurological deficit, and mortality. Results 16 patients met our eligibility criteria in this cohort. Post-operative mean OHS at a minimum of five years was 40.5 (SD=11.9), with a median score of 45. Post-operative mean EuroQol EQ-5D scores at a minimum of 5 years were 0.83 (SD=0.25). Radiographic outcomes were assessed with AP and Judet plain radiographs at a minimum of five years follow-up. Preoperatively, 56.3% (9) showed evidence of dome comminution, with 18.8% (3) demonstrating dome impaction. 93.7% (15) had quadrilateral plate involvement. 12.5% (2) showed evidence of femoral head injury. The rate of conversion to total hip replacement was 6.25% (1) at 15 months post-injury. Conclusions Maintenance of reduction and functional and patient-reported outcomes of patients who underwent open reduction and internal fixation of an acetabular fracture using anatomically contoured suprapectineal plates have satisfactory radiological and functional outcomes at five-year follow-up.

Percutaneous hollow nail internal fixation treatment for fractures of the pubic symphysis and its adjacent areas

Purpose

To explore the percutaneous minimally invasive treatment of pubic symphysis and its adjacent fractures.

Method

Since May 2021, 13 cases of fractures involving the pubic symphysis and its adjacent parts were treated with x-ray fluoroscopic localization and percutaneous cannulated screw fixation across the symphysis pubis, the guide pin pierced the symphysis pubis and the fracture end and stopped at the inner edge of the acetabulum. Visual analogue scale (VAS) was used to evaluate the effect of the operation, and the patients were followed up.

Result

The screw insertion operation time was 25-40 min, with an average of 31.45 min; The number of perspectives is 20-40, with an average of 28.75. The average intraoperative blood loss was 10 ml, and there were no puncture complications such as nerve or vascular damage. The initial stability of the fractured end of the patient after surgery was good. The VAS score decreased from preoperative 8-10 points to postoperative 1-2 points (average of 1.5 points). The follow-up time was 3-25 months, with an average of 8.5 months. At the last follow-up, the excellent and good rate of pelvic function according to Majeed pelvic function scoring system was 100%. One patient had screws removed 1.5 years after surgery, while the remaining twelve patients did not have screws removed. All patients did not experience any discomfort symptoms caused by pubic symphysis fixation.

Conclusion

Percutaneous hollow nail internal fixation is an effective method for treating fractures of the pubic symphysis and its adjacent parts.

Standardization and Reproducibility of Dynamic Stress Testing for Occult Pelvic Ring Instability

INTRODUCTION

Examination under anesthesia (EUA) (stress fluoroscopy) is commonly done after pelvic ring injury to identify occult instability because unstable disruptions may displace causing morbidity. The force applied during EUA for these injuries has not been standardized. The purpose of this study was to examine the forces used during the EUA by experienced orthopaedic trauma pelvic surgeons.

METHODS

Orthopaedic traumatologists performed simulated EUA on a cadaver at two North American pelvis and acetabular courses using internal rotation (IR), external rotation, and push-pull maneuvers while wearing a handheld dynamometer to measure force. All surgeons used a comparable method, and each performed EUA multiple times. Maximum forces were measured in Newton (N).

RESULTS

Eighteen surgeons participated. Four had been practicing for <5 years, six for 5 to 10 years, six for 11 to 20 years, and two for >20 years. Surgeons applied a force ranging from 40.4 to 374.9 N during IR, 72.9 to 338.4 N during external rotation, and 25 to 323 N during push-pull, with notable variability seen between surgeons. Three surgeons (18%) had >50-N variability on serial trials of a single EUA maneuver (IR).

DISCUSSION

This is the first study evaluating the forces applied during pelvic EUA used to assess ring stability. Notable variability existed among surgeons performing EUA and in serial examinations by the same surgeon. Additional study is needed to standardize the displacement measured and threshold for instability that guides management.

Anterior Sacroiliac Fracture Dislocation: A Comparative Radiologic analysis of Crescent Fractures in Pelvic Ring Injuries: A Retrospective Study

Background and Objectives: Anterior sacroiliac fracture dislocation (ASFD), also known as locked pelvis, is a rarely reported diagnosis. The types of ASFDs are often misdiagnosed as lateral compression fractures due to the presence of crescent fractures. In this study, we distinguished ASFD from lateral compression fractures (LC 2) and studied their characteristics. Materials and Methods: This is a retrospective study involving patients from a Level 1 trauma center. Fifty-nine patients under the age of 65 years with crescent fractures caused by a high-energy mechanism were investigated. Results: The incidence of ASFD was 25% (15 of 59) in patients with crescent fractures. Among the 15 patients, 6 had override of the ilium over the sacrum, inhibiting reduction in the sacroiliac joint. Pre-operative radiographic evaluations revealed that vertical displacement of the ASFD was larger than that of lateral compression fracture (LC 2) in the outlet view (mean 9.5 vs. 1.9 mm, p = 0.013), and the pelvic asymmetry ratio was larger in ASFD (mean 7.8 vs. 4.1, p = 0.006) in the pelvis AP view. All patients achieved union after surgery. Post-operative radiography showed no significant vertical displacement difference. There was no difference in vascular injury or hemodynamic instability requiring embolization or preperitoneal pelvic packing (PPP) between the two groups. Conclusions: Patients with ASFD have greater vertical displacement and asymmetry compared to patients with LC 2 fractures. These fractures must be distinguished for appropriate reduction and anterior plate fixation.

Triangular spinopelvic fixation for U-shaped sacral fractures and tile C pelvic disruptions: counter-nutation (anteflexion and rotation) load-bearing instability requires complementary anterior pelvic ring fixation

Unstable trauma lesion of the spinopelvic junction, including U-shaped sacral fractures and Tile C pelvic ring disruptions, require surgical stabilization in order to realign the bone arches of the pelvis thus reducing the upcoming orthopaedic impairment during sitting, standing, and walking positions, decompress the nerves roots of the cauda equina in a view of reducing neurological impairment, and allow early weight bearing. Even though posterior open modified triangular spinopelvic fixation is particularly efficient for treating unstable trauma lesions of the spinopelvic junction, it may not be sufficient alone in order to prevent long-term counter-nutation, i.e. rotation and anteflexion deformity of the anterior pelvis under load bearing conditions. Such progressive deformation is caused by either the slight rotation of the iliac connectors within the head of iliac screws for spinopelvic constructs, or the slight rotation of sacral cancellous bone around transsacral screws in case of percutaneous procedure. Regardless of the posterior surgical technique that is used, complementary anterior pelvic fixation appears mandatory in order to prevent such deformation over time, which can lead to pelvic asymmetry and then gait imbalance.

A new technique for percutaneous screw fixation for treating FFP IIIa and IIIb fragility fractures of the pelvis

To determine the presence of a consistent osseous corridor from the lateral-posterior aspect of the anterior inferior iliac spine to the sacral wing that could be used for safe trans percutaneous screw fixation for pelvic fragility fractures of the iliac wing and fracture dislocations of the sacroiliac joint (FFP types IIIa and IIIb). Computed tomography (CT) scans were obtained from 100 patients and imported to Mimics software for 3D reconstruction. Then, a cylinder was drawn to imitate the modified LC-II screw and adjusted to a maximum radius and length to obtain the feasible region. Thirteen parameters of the osseous corridor of the modified LC-II screw were measured. Differences between sex groups were compared, and significant statistical correlations were carefully studied to determine potentially important clinical relationships. The records of patients with FFP type IIIa and IIIb fragility fractures of the pelvis were extracted from our hospital. Patients who underwent modified LC-II screw fixation, LC-II screw fixation or reconstruction plate fixation were included. Patients' operative characteristics and complications were recorded at follow-up. Fracture reduction quality was assessed using the Matta standard. Functional outcomes were evaluated using the Majeed grading system. The mean maximum diameters of the osseous corridors of the modified LC-II screw in males and females were 12.73 and 10.83 mm, respectively. The mean maximum lengths of the osseous corridors of the modified LC-II screw in males and females were 96.37 and 93.37 mm, respectively. In the treatment of patients with FFP IIIa and FFP IIIb fractures, the group of treatment by the modified LC-II screws fixation was shown significantly shorter operative time and fewer intraoperative blood loss in comparison to that by the reconstruction plates. In the present study, all the males and females had a complete osseous corridor of the modified LC-II screw. The clinical results of the patients who were treated with modified LC-II screw fixation suggest that the novel method has a good preliminary outcome.

Plate fixation of inferior ramus in pubis-ischium ramus improves mechanical stability in Tile B pelvic injures: a cadaveric biomechanical analysis and early clinical experience

BACKGROUND

Management of inferior ramus of the pubis-ischium ramus remains controversial, and related research is sparse. The main intention of this study is to describe the biomechanical and clinical outcomes of pubis-ischium ramus fractures in Tile B pelvic injuries and to identify the feasibility and necessity of fixation of the inferior ramus of the pubis-ischium ramus.

METHODS

This study comprised two parts: a biomechanical test and a retrospective clinical study. For the biomechanical tests, Tile B-type pelvic injuries were modeled in six cadaver specimens by performing pubis-ischium osteotomies and disruption of the anterior and interosseous sacroiliac ligaments. The superior and/or inferior rami of the pubis-ischium ramus were repaired with reconstruction plates and separated into three groups (A, B, and C). Specimens were placed in the standing position and were loaded axially with two-leg support for three cycles at 500 N. The displacements of sacroiliac joints at osteotomy were measured with Vernier calipers and compared using statistical software. To investigate the clinical outcomes of this technique, 26 patients were retrospectively analyzed and divided into a superior ramus fixation group (Group D) and a combined superior and inferior ramus of the pubis-ischium ramus fixation group (Group E). The main outcome measures were time of operation, blood loss, postoperative radiographic reduction grading, and functional outcomes.

RESULTS

In the vertical loading test, Group E showed better pelvic ring stability than Group D (P < 0.05). However, the shift of the sacroiliac joints was almost identical among the three groups. In our clinical case series, all fractures in Group E achieved bony union. Group E demonstrated earlier weight-bearing functional exercise (2.54 ± 1.45 vs 4.77 ± 2.09; P = 0.004), earlier bony union (13.23 ± 2.89 vs 16.55 ± 3.11; P = 0.013), and better functional outcomes (89.77 ± 7.27 vs 82.38 ± 8.81; P = 0.028) than Group D. The incidence of sexual dysfunction was significantly lower in Group E than that in Group D (2/13 vs 7/13; P = 0.039). Bone nonunion occurred in two patients in Group D, and two patients in Group E had heterotopic ossification. None of the patients exhibited wound complications, infections, implant failures, or bone-implant interface failures.

CONCLUSIONS

Fixation of the inferior ramus of a pubis-ischium ramus fracture based on conventional fixation of the anterior pelvic ring is mechanically superior in cadaveric Tile B pelvic injury and shows rapid recovery, good functional outcomes, and low incidence of complications.

Fluoroscopy guided teardrop technique for open trans-muscular iliac screw placement and open reduction maneuvers during modified triangular spinopelvic fixation for unstable U-shaped sacral and tile C pelvic traumas: technical note

Unstable traumas of the spinopelvic junction, which include displaced U-shaped sacral fractures (Roy-Camille type 2 and type 3) and Tile C vertical shear pelvic ring disruptions, occur in severe traumas patients following high speed traffic accident or fall from a height. These unstable traumas of the spinopelvic junction jeopardize one's ability to stand and to walk by disrupting the biomechanical arches of the pelvis, and may also cause cauda equina syndrome. Historically, such patients were treated with bed rest and could suffer a life-long burden of orthopedic and neurological disability. Since Schildhauer pioneer work back in 2003, triangular spinopelvic fixation, whether it is performed in a percutaneous fashion or by open reduction and internal fixation, allows to realign bone fragments of the spinopelvic junction and to resume walking within three weeks. Nevertheless, such procedure remains highly technical and it not encountered very often, even for spine surgeons working in high-volume level 1 trauma centers. Hence, this visual technical note aims to provide a few tips to guide less experience surgeons to complete this procedure safely.

Operative management of sacroiliac joint dislocation in children with unstable pelvic fractures - A STROBE-compliant investigation

Objective

Injuries involving severe spinal axial loading may be accompanied by sacroiliac joint dislocations. In children, these injuries are relatively rare, and there is little information on their optimal management in young patients. We conducted a multicentre study to investigate the outcome of surgical treatment of unstable pelvic fracture with sacroiliac joint dislocation in children.

Patients & methods

We assessed the quality of surgical reduction and functional outcome at follow-up in 7 patients (5 girls, 2 boys) with a median age of 6.4 years (range: 4.2-14.8 years). Patients with pelvic fractures and sacroiliac joint dislocations were treated at four international paediatric level 1 trauma centres between January 2008 and August 2023. We applied the Matta criteria to assess the quality of fracture reduction and graded the functional follow-up results using adjusted Majeed score.

Results

At follow-up, 3 patients showed excellent fracture reduction, with 2 patients showing good reduction and 2 patients exhibiting fair fracture reduction according to the Matta criteria. At follow-up visits at a median of 12 months (range: 3-84 months) after the injury, patients achieved a median adjusted Majeed score of 76 (range: 63 to 76).

Conclusions

Unstable pelvic injuries with sacroiliac joint dislocation without comminution can be stabilised with a single iliosacral screw in children. Comminuted pelvic fractures with unstable sacroiliac dislocation require stabilisation with lateral compression screws or plates. In case of residual pelvic instability after internal fixation, an additional external fixator or pelvic hammock should be applied to optimize the stability of fixation.

Functional outcome and analysis of factors affecting health-related quality of life of surgically managed pelvic ring fractures: a cross-sectional study

INTRODUCTION

Pelvic ring fractures, particularly those involving the posterior pelvis, pose significant challenges due to their inherent instability. The posterior pelvic ring is critical in providing structural support and stability to the pelvis. This study evaluates the functional outcomes and health-related Quality of life (HRQOL) of patients who underwent internal fixation for unstable pelvic fractures. Various factors influencing the outcomes are also investigated.

MATERIAL AND METHODS

A single-center cross-sectional study was conducted on patients with unstable sacral fractures treated with posterior tension band plate or sacroiliac plating with or without symphyseal plating between 2016 and 2020. Patient demographics, injury mechanisms, associated injuries, surgical details, complications, and return-to-work data were collected. HRQOL was assessed using specific pelvic fracture instruments and general HRQOL questionnaires. Logistic regression analysis was performed to identify factors associated with lower SF-12 and SF-36 scores RESULTS: The study included 54 patients, predominantly males (55.6%), aged 18-70 years, with high-energy trauma mechanisms, such as road traffic accidents and occupational injuries. The majority of patients had lateral compression pelvic fractures. Overall, the functional outcomes were favorable, with excellent or good outcomes observed in 86.1% of cases. Patients with associated injuries, such as abdominal, chest, or head injuries, were likelier to have lower SF-12 physical component scores. Sexual satisfaction scores remained stable for most patients post-surgery.

DISCUSSION

This study highlights the favorable functional outcomes and HRQOL for patients undergoing fixation for unstable pelvic ring fractures. Younger, working-age males were the most commonly affected demographic. Associated injuries significantly affected physical HRQOL scores. Despite high-energy trauma, patients generally reported satisfactory sexual function post-surgery.

Intelligent robot-assisted fracture reduction system for the treatment of unstable pelvic fractures

BACKGROUND

Precise and minimally invasive closed reduction is the premise of minimally invasive internal fixation. This paper aims to explore the safety and efficacy of a robot-assisted fracture reduction system (RAFR) in the treatment of pelvic fractures and to analyze its clinical advantages and existing problems.

METHODS

The RAFR system intelligently designed the optimal reduction path and target position based on a preoperative three-dimensional(3D) CT scan of the patient. The reduction robotic arm automatically reduced the affected hemipelvis according to the pre-planned reduction path.

RESULTS

The average residual displacement was the 6.65 ± 3.59 mm. According to Matta's criteria, there were 7 excellent, 10 good, and 3 fair, and the excellent and good rate was 85%. No postoperative complications occurred.

CONCLUSION

In our study, the RAFR system could complete accurate and minimally invasive closed reduction for most patients with unstable pelvic fractures, which could achieve good fracture reduction quality and short-term efficacy.

A Countertraction Closed Reduction Technique in Minimally Invasive Fixation of Recent Type C Pelvic Ring Injuries

OBJECTIVE

Closed reduction of pelvic injuries is a prerequisite and critical step in minimally invasive treatment. Achieving non-invasive closed reduction of pelvic injuries is a challenging clinical problem. This study demonstrated a non-invasive traction technique for closed reduction called countertraction closed reduction technique (CCRT) and evaluated its effectiveness for type C pelvic ring injuries.

METHOD

The data of patients with unstable pelvic fractures treated with CCRT and minimally invasive fixation were retrospectively reviewed from January 2017 to February 2022. Sacroiliac screws were placed to fix the posterior pelvic ring, and internal or external fixation was used to fix the anterior pelvic ring. Operation time, intraoperative blood loss, duration of hospital stay, fracture union and postoperative complications were recorded. Fracture reduction quality was evaluated using the Matta scoring criteria. Functional recovery and general quality of life were evaluated using the Majeed functional scoring criteria.

RESULTS

Thirteen patients (nine males and four females), with an average age of 49.6 years were treated with CCRT and followed up for a mean of 18.5 months. The average operation time was 137.2 minutes (range 92-195 minutes), the average intraoperative blood loss was 31.2 mL (range 10-120 mL) and the average duration of hospital stay was 14.3 days (range 4-32 days). All patients achieved bony union with an average union time of 11.9 weeks (range 10-16 weeks). According to the Matta radiographic criteria, the quality of fracture reduction was excellent in eight patients, good in four, and fair in one. The average Majeed functional score was 89.7 (range 78-100). The functional evaluation revealed that the outcomes were excellent in nine patients, and good in four patients. Complications included incision fat liquefaction in one patient, and heterotopic ossification in another patient. There were no surgical complications as a result of CCRT.

CONCLUSION

CCRT is a non-invasive closed reduction method for minimally invasive fixation of fresh Tile C1 and C2 pelvic fractures. The advantages of CCRT combined with minimally invasive treatment include a small surgical incision, reduced intraoperative bleeding, satisfactory fracture reduction, bone healing and functional recovery.

Open reduction and internal fixation of crescent fracture-dislocation: anterior or posterior approach?

INTRODUCTION

To date, the approach that prevails in the open reduction and internal fixation of crescent fracture-dislocations (CFD) remains unknown. This study aimed to compare the outcomes of CFD treated via the anterior or posterior approach.

MATERIALS AND METHODS

Data from 64 cases of CFDs openly reduced through an anterior (group A, n = 31) or a posterior (group B, n = 33) approach were retrospectively analyzed. Functional results, reduction quality, residual displacements in the axial and coronal planes, pelvic asymmetry deformity, and correlations between Day's classification were compared. Complications and fracture union were also recorded. All patients were followed up for at least 12 months.

RESULTS

The functional scores were similar between the two groups, and all fractures achieved good or excellent reduction postoperatively. In the coronal plane, the excellent/good ratio in group B was higher than in group A. The mean residual displacement in the coronal plane was significantly higher in group A than in group B, with group A showing greater displacement in both planes for Day I fractures and in the coronal plane for Day II fractures. The residual displacement in both planes for Day III fractures was comparable between the groups. The pelvic asymmetry deformity was equal between the two groups and among the different Day's fracture types.

CONCLUSIONS

Open reduction and internal fixation of CFDs obtained satisfactory outcomes through an anterior or posterior approach. The posterior approach achieved a better sacroiliac joint reduction. The optimal indication for the posterior approach was a Day I fracture, followed by a Day II fracture. No correlation was found between the surgical approach and reduction quality in Day III fractures.

Does Anterior Plating of Pelvic Ring Fractures Increase Infection Risk in Patients With Bladder or Urethral Injuries?

OBJECTIVES

Evaluate the effect of anterior fixation on infection in patients with operative pelvic fractures and bladder or urethral injuries.

METHODS

DESIGN

Retrospective.

SETTING

Eight centers.

PATIENT SELECTION CRITERIA

Adult patients with closed pelvic fractures with associated bladder or urethral injuries treated with anterior plating (AP), intramedullary screw (IS), or no anterior internal fixation (NAIF, including external fixation or no fixation).

OUTCOME MEASURES AND COMPARISONS

Deep infection.

RESULTS

There were 81 extraperitoneal injuries and 57 urethral injuries. There was no difference in infection between fixation groups across all urologic injuries (AP: 10.8%, IS: 0%, NAIF: 4.9%, P = 0.41). There was a higher rate of infection in the urethral injury group compared with extraperitoneal injuries (14.0% vs. 2.5%, P = 0.016). Among extraperitoneal injuries, specifically, there was no difference in deep infection related to fixation (AP: 2.6%, IS 0%, NAIF: 2.9%, P = 0.99). Among urethral injuries, there was no statistical difference in deep infection related to fixation (AP: 23.1%, IS: 0%, NAIF: 7.4%, P = 0.21). There was a higher rate of suprapubic catheter (SPC) use in urethral injuries compared with extraperitoneal injuries (57.9% vs. 4.9%, P < 0.0001). In the urethral injury group, SPC use did not have a statistically significant difference in infection rate (SPC: 18.2% vs. No SPC: 8.3%, P = 0.45). Early removal of the SPC before or during the definitive orthopaedic intervention did not significantly affect infection rate (early: 0% vs. delayed: 25.0%, P = 0.16).

CONCLUSIONS

Surgeons should approach operative pelvic fractures with associated urologic injuries with caution given the high risk of infection. Further work must be done to elucidate the effect of anterior implants and SPC use and duration.

LEVEL OF EVIDENCE

Prognostic Level III. See Instructions for Authors for a complete description of levels of evidence.

TiRobot-Assisted Percutaneous Cannulated Screw Fixation for Elderly Patients with Fragility Fractures of the Pelvis: A Retrospective Study

OBJECTIVE

The incidence of fragility fractures of the pelvis (FFPs) is increasing in the elderly population, and FFPs that require fixation are a challenge for orthopedic surgeons. The insertion of implants is not risk free due to the complex anatomical and osteoporotic bones and requires a steep learning curve. This study aimed to investigate the clinical efficacy of TiRobot-assisted percutaneous cannulated screw fixation in the treatment of elderly FFP patients.

METHOD

The clinical data of 46 elderly FFP patients who had been treated with percutaneous cannulated screw fixation from May 2020 to September 2022 were retrospectively analyzed. Twenty-four patients were treated with percutaneous cannulated screw fixation assisted by the TiRobot (TiRobot-assisted group) and 22 patients were treated with conventional freehand surgery (freehand group). Postoperative outcomes, including Matta value, excellent and good rate (EGR) of fracture reduction, and accuracy of screw placement (ASP), were compared. Changes in the Visual analog scale (VAS) pain score and the Majeed score were recorded and compared between groups before and after surgery and during the 24-week follow-up. Repeated-measures analysis of variance (ANOVA) and effect sizes were used as analysis methods.

RESULTS

A total of 90 screws were implanted, 51 screws in the TiRobot-assisted group and 39 screws in the freehand group. The operation time of the two groups was 34.1 ± 2.67 min versus 64.5 ± 4.19 min (p < 0.001). There were no screw-related complications or revision surgeries in any group. The Matta value of the TiRobot-assisted group was 5.13 ± 3.52, which was significantly lower than that of the freehand group (9.00 ± 3.68, p < 0.001), while the EGR was 91.67% versus 72.73%, with statistical significance (p < 0.001). The ASP was 100% in the TiRobot-assisted group, better than that in the freehand group, where it was 85.7% (p = 0.043). At each timepoint in the early postoperative period, the VAS score of the TiRobot-assisted group was significantly lower than that of the freehand group and was close to consistent by the last follow-up; the Majeed score of the former was significantly higher than that of the latter at each timepoint of follow-up, with statistical significance (p < 0.001).

CONCLUSION

TiRobot-assisted percutaneous cannulated screw fixation of elderly FFP patients is advantageous over conventional freehand surgery, with less invasion, more accurate screw placement, better fracture reduction, early pain relief, and rapid recovery, suggesting that Freehand method to stabilize FFP in the elderly population.

A comparison between ilioinguinal and modified Stoppa approach in anterior column acetabular fractures

INTRODUCTION

Pelvis fractures are among the most difficult fractures to manage and treat for Orthopedic surgeons. Anatomic reduction is the main goal to reach in the acetabular fractures' treatment. The following study compares clinical outcomes and complications of Ilioinguinal versus modified Stoppa approach in Open Reduction and Internal Fixation (ORIF) of anterior column acetabulum fractures.

MATERIALS AND METHODS

A comparative analysis on 90 patients undergoing ORIF on acetabular fracture has been performed. Patients have been divided into two groups. The first group was treated by Ilioinguinal approach (n = 48), the second group by modified Stoppa approach (n = 42). The following parameters have been compareted: quality of fragment reduction; operative time; peri‑ and post-operative blood loss; complications; clinical and radiographic outcomes.

RESULTS

The modified Stoppa approach has shown a shorter mean operative time (146 min vs 175 min), fewer complications (14/48 vs 6/42), less blood loss both in the perio-operative phase (0.8 Hb pt vs 1.3 Hb pt) than in postoperative one (1.1 Hb pt vs 1.5 Hb pt), a lower rate of nerve, infections and critical complications. On the other hand, the ilioinguinal approach has showed better results in terms of quality of fracture reduction (43/48 patiens with anatomical or near anatomical reduction vs. 37/42). No significant differences concerning vascular lesions, clinical and functional outcomes have been found between the two groups.

CONCLUSIONS

The modified Stoppa approach results in shorter operative time, less intra-operative blood loss and fewer complications than the ilioinguinal one. Greater anatomic reduction is achieved by Ilioinguinal approach; however, this does not necessarily translate into better clinical and functional outcomes which, overall, are comparable in the two analysed approaches. In conclusion, the modified Stoppa approach is deemed to be a better alternative in treating these fractures.

Percutaneous Ilioilial Fixator Versus Percutaneous Iliosacral Screw in Managing Unstable Sacral Fractures: A Prospective Randomised Controlled Study

INTRODUCTION

Unstable sacral fractures with pelvic fractures are challenging to both surgeons and patients, particularly in the immediate post-injury phase and later when definitive fixation is undertaken. Percutaneous iliosacral screw fixation is widely regarded as the gold standard treatment for unstable sacral fractures without spinopelvic dissociation. Closed reduction and percutaneous fixation using iliosacral screws for sacral fractures provide early stabilisation without the need for extensive surgical exposure, thereby mitigating major complications associated with open surgical procedures. A new technique for stabilising unstable sacral fractures is the minimally invasive ilioilial fixator, also called a transiliac internal fixator (TIIF), which has gained more attention for its ability to address challenges associated with sacroiliac screw fixation. The objective of this study is to compare the functional, radiological, and surgical outcomes between the percutaneous iliosacral screw and the ilioilial fixator.

METHODS

A total of 51 patients with sacral fracture injuries sustained between August 2019 and November 2021 were included in this study, with 25 patients in Group A and 26 patients in Group B. Patient randomization was done using computer-generated randomization facilitated by Random Allocation Software (Mahmood Saghaei, Isfahan, Iran). All patients underwent the chosen intervention within 10 days of the trauma. Patients had follow-up at two weeks, six weeks, and 12 months post-treatment. The results of fixation were evaluated radiologically based on the Matta and Tornetta grading system and clinically using the Majeed pelvic scoring system. Complications were detected in both groups during follow-up visits.

RESULTS

The study found no statistically significant differences between the two patient groups in terms of final clinical assessment (p=0.79), radiological assessment (p=0.78), or the need for another operation (p=1.0). Moreover, there were no statistically significant differences between the groups with respect to complication rates (p=0.63) or the time of union (p=0.14). No differences were noted in terms of intraoperative blood loss (p=0.93) or operative time (p=0.34) but for longer incision length in the ilioilial fixator group (p<0.001) and an increased risk of intraoperative radiation exposure in the iliosacral screw group (p<00.1).

DISCUSSION

Although the iliosacral screw is considered a gold standard for unstable sacral fracture, a TIIF is a good alternative with a very satisfactory outcome.

CONCLUSION

Although the iliosacral screw still remains the gold standard for the management of sacral fractures, the ilioilial fixator emerges as a good alternative with comparable functional and radiological outcomes.

Specifying the Starting Point for S1 Iliosacral Screw Placement in the Dysmorphic Sacrum

BACKGROUND

Sacral dysmorphism is not uncommon and complicates S1 iliosacral screw placement partially because of the difficulty of determining the starting point accurately on the sacral lateral view. We propose a method of specifying the starting point.

METHODS

The starting point for the S1 iliosacral screw into the dysmorphic sacrum was specifically set at a point where the ossification of the S1/S2 intervertebral disc (OSID) intersected the posterior vertebral cortical line (PVCL) on the sacral lateral view, followed by guidewire manipulation and screw placement on the pelvic outlet and inlet views. Computer-simulated virtual surgical procedures based on pelvic computed tomography (CT) data on 95 dysmorphic sacra were performed to determine whether the starting point was below the iliac cortical density (ICD) and in the S1 oblique osseous corridor and to evaluate the accuracy of screw placement (with 1 screw being used, in the left hemipelvis). Surgical procedures on 17 patients were performed to verify the visibility of the OSID and PVCL, to check the location of the starting point relative to the ICD, and to validate the screw placement safety as demonstrated with postoperative CT scans.

RESULTS

In the virtual surgical procedures, the starting point was consistently below the ICD and in the oblique osseous corridor in all patients and all screws were Grade 1. In the clinical surgical procedures, the OSID and PVCL were consistently visible and the starting point was always below the ICD in all patients; overall, 21 S1 iliosacral screws were placed in these 17 patients without malpositioning or iatrogenic injury.

CONCLUSIONS

On the lateral view of the dysmorphic sacrum, the OSID and PVCL are visible and intersect at a point that is consistently below the ICD and in the oblique osseous corridor, and thus they can be used to identify the starting point.

LEVEL OF EVIDENCE

Therapeutic Level III . See Instructions for Authors for a complete description of levels of evidence.

Sacroiliac versus transiliac-transsacral screw osteosynthesis in osteoporotic pelvic fractures: a biomechanical comparison

INTRODUCTION

Pelvic fractures were often associated with high-energy trauma in young patients, but data show a significant increase in osteoporotic pelvic fractures in old age due to the progressive demographic change. There is an ongoing discussion about the best fixation techniques, which are ranging from lumbopelvic fixation to sacral bars or long transiliac-transsacral (TITS) screws. This study analyzes TITS screw osteosynthesis and sacroiliac screw osteosynthesis (SI), according to biomechanical criteria of fracture stability in osteoporotic human pelvic cadavers ex vivo.

METHODS

Ten osteoporotic cadaveric pelvises were randomized into two groups of 5 pelvises each. An FFP-IIc fracture was initially placed unilaterally and subsequently surgically treated with a navigated SI screw or a TITS screw. The fractured side was loaded in a one-leg stance test setup until failure. Interfragmentary movements were assessed by means of optical motion tracking.

RESULTS

No significant difference in axial stiffness were found between the SI and the TITS screws (21.2 ± 4.9 N and 18.4 ± 4.1 N, p = 0.662). However, there was a significantly higher stability of the fracture treatment in the cohort with TITS-screws for gap angle, flexion, vertical movement and overall stability. The most significant difference in the cycle interval was between 6.000 and 10.000 for the gap angle (1.62 ± 0.25° versus 4.60 ± 0.65°, p = 0.0001), for flexion (4.15 ± 0.39 mm versus 7.60 ± 0.81 mm, p = 0.0016), interval 11.000-15.000 for vertical shear movement (7.34 ± 0.51 mm versus 13.99 ± 0.97 mm, p < 0.0001) and total displacement (8.28 ± 0.66 mm versus 15.53 ± 1.07 mm, p < 0.0001) for the TITS and the SI screws.

CONCLUSIONS

The results of this biomechanical study suggest a clear trend towards greater fracture stability of the TITS screw with significantly reduced interfragmentary movement. The application of a TITS screw for the treatment of the osteoporotic pelvic ring fracture may be prioritized to ensure the best possible patient care.

A New Technology Using Mixed Reality Surgical Navigation with the Unlocking Closed Reduction Technique Frame to Assist Pelvic Fracture Reduction and Fixation: Technical Note

BACKGROUND

Pelvic ring disruption (PRD) is a serious trauma associated with high mortality and disability rates. Poor reduction can lead to complications such as pelvic deformity and delayed fracture healing. Here, we introduce a new technology using mixed reality surgical navigation (MRSN) with an unlocking closed reduction technique (UCRT) frame to assist pelvic fracture reduction and fixation.

METHODS

Thirty patients with PRD were enrolled in this study. All of the patients underwent preoperative CT scans, with the pelvis and tracker segmented into three-dimensional models. Under MRSN guidance, auxiliary reduction screws were inserted to grasp the pelvic bone. An ideal trajectory for closed reduction was planned, and suitable CS screws were used for stable fixation after good reduction. Operation time, fluoroscopy frequency, and both Matta and Majeed scores were analyzed.

RESULTS

The mean follow-up period was 10.8 months (7.5, 12.25 months) (range 6-24 months). The average duration of operation was 212.5 min (187.5, 272.8 min) (range 133-562 min), and the average reduction time was 23.0 min (15.0, 42.5 min) (range 10-70). The average fluoroscopy frequency was 34.0 times (31.5, 52.5 times) (range 23-68 times). One hundred and fifty screws were successfully inserted on the first attempt. All the fractures healed well with no complications. Excellent reduction quality (Matta score ≤4 mm) was achieved in 29/30 cases, and good reduction quality (Matta score between 4 and 10 mm) was achieved in 1/30 cases. All patients achieved bone healing after an average of 4.0 months (3.5, 5.9 months) (range 3-6), as well as good function recovery with an average Majeed score of 91.0 (87.8, 95.0) (range 71-100).

CONCLUSION

The MRSN technique described improved reduction accuracy and radiation exposure without considerable extension of operation time.

Minimally invasive surgery technique for unstable pelvic ring fractures with severe vertical shear displacement: A retrospective study

BACKGROUND

Unstable pelvic fractures, especially vertical shear fractures, require surgery for correct reduction, rigid fixation, and improved postoperative outcomes. Herein, we assess the effectiveness of our minimally invasive procedure for the management of unstable pelvic fractures.

HYPOTHESIS

We hypothesized that this procedure would be useful for the management of unstable pelvic fractures.

PATIENTS AND METHODS

This study included 28 patients with unstable pelvic fractures (vertical shear injuries; AO types C1-3) treated using minimally invasive surgery for spinopelvic fixation (MIS-SP) between 2014 and 2020 (mean follow-up time, 15 months). The MIS-SP requires four percutaneous pedicle screws and four iliac screw insertions. Subsequently, reduction and fixation are performed.

RESULTS

The mean preoperative displacement of the posterior pelvic elements in craniocaudal correction was 17.6 (range, 9.0-32.2) mm. The mean length of the craniocaudal reduction was 16.5 (8.1-30.1) mm, with a mean reduction rate of 93.5% (78%-100%). The mean length of the mediolateral reduction was 11.3 (3.9-19.6) mm, with a mean reduction rate of 87.3% (76%-100%).

DISCUSSION

Our novel reduction and fixation procedure is a powerful, minimally invasive option for the treatment of unstable pelvic ring fractures.

LEVEL OF EVIDENCE

III.

Preoperative Virtual Reduction Planning Algorithm of Fractured Pelvis Based on Adaptive Templates

OBJECTIVE

The minimally invasive treatment of pelvic fractures is one of the most challenging trauma orthopedics surgeries, where preoperative planning is crucial for the performance and outcome of the surgery. However, planning the ideal position of fragments currently relies heavily on the experience of the surgeon.

METHODS

A pelvic fracture virtual reduction algorithm for target position is provided based on statistical shape models (SSM). First, according to sexual dimorphism, pelvic SSM based on point cloud curvature down-sampling are constructed as adaptive templates. Then, an optimization algorithm is designed to iteratively adjust the target pose of the fragments and the adaptive matching of the templates. Finally, the feasibility of the method is verified by simulating fractures and clinical data.

RESULTS

The pelvis has complex shape characteristics, which can be analyzed by SSM to clearly understand the pattern of change. Experiments showed that the SSM-based pelvic fracture reduction method had translation and rotation errors of 2.20±1.09 mm and 3.16±1.26° in simulated cases, and 2.78±0.95 mm and 3.10±0.53° in clinical cases, which has higher accuracy than methods based on mean shape models, and wider applicability than methods based on pelvic symmetry.

CONCLUSION

The pelvic digital model created by SSM has good generalization properties, and the SSM-based virtual reduction algorithm can effectively reconstruct the target position of the fractured pelvis in preoperative planning.

SIGNIFICANCE

The proposed reduction method has the characteristics of high precision and wide application range, which provides a powerful tool for the surgeon's virtual preoperative planning.

Inclined angles of acetabular quadrilateral plate: digital measurement and clinical application of the new anatomical concept

PURPOSE

Matta scoring standard is one of the most frequently used postoperative imaging evaluations for acetabular fracture reduction, but has obvious shortcomings. This study, for the first time, proposed the concept of inclined angles of acetabular quadrilateral plate. The purpose of this study was to investigate the normal range of the inclined angles in adults by digital measurement and explore the feasibility of using them to evaluate the reduction quality of acetabular quadrilateral fractures after surgery.

METHODS

Firstly, the pelvic CT three-dimensional reconstruction data of 40 healthy adults including 20 males and 20 females were collected. The normal range of the anterior, middle, and posterior inclined angles were measured via Mimics software. Secondly, a modified Matta criteria that combined the classic Matta criteria and evaluation criteria of the inclined angles was proposed. And we classified modified Matta criteria into three grades including excellent, good and poor. Finally, a total of 125 cases with quadrilateral plate fractures was included and the postoperative CT data were analyzed by using both the classic Matta criteria and our modified Matta criteria. Then, the accuracy and consistency of both criteria to evaluate postoperative hip function was investigated.

RESULTS

The average anterior inclined angle: male (97.11° ± 2.59°), female (90.63° ± 2.09°); middle inclined angle: male (105.57° ± 1.93°), female (100.64° ± 2.46°); and posterior inclined angle: male (112.62° ± 2.54), female (106.37° ± 2.53°). Whether in males or in females, the anterior, middle, and posterior inclined angles showed a progressively increasing trend. All the three inclined angles in males were all significantly larger than those in females (p < 0.05). Among 125 cases with quadrilateral plate fractures, 101 cases (80.8%) were graded as excellent, 18 cases (14.4%) as good, and 6 cases (4.8%) as poor according to the classic Matta criteria. While based on modified Matta criteria, there were excellent in 37 cases (29.6%), good in 76 cases (60.8%), and poor in 12 cases (9.6%). According to the Harris hip score system, the functional outcomes were excellent in 59 cases (47.2%), good in 26 cases (20.8%), fair in 24 cases (19.2%), and poor in 16 cases (12.8%). Our results showed that among the cases evaluated as excellent according to the classic Matta criteria and modified Matta criteria, the excellent-to-good rates of hip function were 70.3% and 78.4%, respectively. And among the cases evaluated as poor according to the modified Matta criteria, the fair-to-poor rate of hip function was 75%, while this value was 50% for classic Matta criteria. Both differences were statistically significant (p < 0.05).

CONCLUSION

Inclined angles of the quadrilateral plate could be used to assess the quality of fracture reduction and provide a basis for evaluating the rotational displacement of fracture blocks in the quadrilateral plate, which compensates the shortage of classic Matta criteria.

Internal fixator vs external fixator in the management of unstable pelvic ring injuries: A prospective comparative cohort study

BACKGROUND

Reconstruction of the pelvic ring anatomy in unstable anterior pelvic ring injuries is a significant step to reduce the mortality rate associated with these injuries efficiently. There is a debate on using either an anterior subcutaneous pelvis internal fixator (INFIX) or an anterior supra-acetabular external fixator (EXFIX) to manage an unstable anterior pelvic ring fracture.

AIM

To compare the functional and radiological outcomes and complications of INFIX vs EXFIX in managing unstable pelvic ring injuries.

METHODS

A prospective cohort study included 54 patients with unstable pelvic ring fractures. The patients were divided into two groups; the INFIX group, in which 30 cases were fixed by INFIX, and the EXFIX group, in which 24 patients were treated by EXFIX. The average age in the EXFIX group was 31.17 years (16-57 years), while in the INFIX group, it was 34.5 years (17-53 years). The study included 20 (66.7%) males and 10 (33.3%) females in the INFIX group and 10 (41.7%) males and 14 (58.3%) females in the EXFIX group. The radiological outcomes were evaluated using Matta and Tornetta's score, and the functional outcomes using the Majeed score.

RESULTS

The results revealed a statistically significant difference between both groups (P = 0.013) regarding radiological outcomes, according to Matta and Tornetta's score in favor of the INFIX group. Sitting, standing, and walking abilities were measured at a 3-mo follow-up visit using Majeed score modules. It was significantly better among the INFIX group than the EXFIX group in all three modules. At the final follow-up, both groups had no statistically significant difference according to the Majeed score; 92.35 in the INFIX group and 90.99 in the EXFIX group (P = 0.513). A lower surgical site infection rate was noticed in the INFIX group (P = 0.007).

CONCLUSION

Anterior subcutaneous pelvis INFIX is associated with better radiological outcomes and a lower infection rate than anterior supra-acetabular EXFIX in managing patients with unstable anterior pelvic ring fractures.

Combined pelvic and acetabular injuries: clinical features and treatment strategies of a unique injury pattern

BACKGROUND

To explore the clinical characteristics of patients with unstable pelvic fractures combined with acetabular fractures and to discuss the treatment strategies for such patients to help guide treatment.

METHODS

We retrospectively assessed 24 patients admitted to our hospital from June 2018 to June 2022 with unstable pelvic fractures combined with acetabular fractures, including 15 male patients and 9 female patients with a mean age of 44.8 years. According to the Tile pelvic fracture classification, 15 cases were type B, and 9 cases were type C. The acetabular fractures were classified using the Letournel-Judet classification. There were 8 transverse fractures, 4 transverse and posterior wall fractures, 3 anterior and posterior hemitransverse fractures, 6 both-column fractures, 2 T-shaped fractures and 1 anterior column fracture. We recorded the cause of the patient's injury and vital signs on admission and assessed the patient's treatment strategy and prognosis.

RESULTS

All patients completed the surgery successfully, and the follow-up ranged from 6 to 42 months, with a mean of 23 months. The healing time for pelvic fractures ranged from 11 to 21 weeks, with a mean of 14.8 weeks, and the postoperative displacement of the posterior pelvic ring ranged from 1.2 to 9.0 mm, with a mean of 3.5 mm. The final clinical outcome at follow-up was evaluated using the Majeed scale: excellent in 11 cases, good in 10 cases and fair in 3 cases; the excellent rate was 87.5%. The time to healing of the acetabular fracture ranged from 13 to 25 weeks, with a mean of 15.9 weeks, and the postoperative displacement of the acetabular fracture ranged from 0.6 to 5.2 mm, with a mean of 1.9 mm. Hip function was assessed at the final follow-up using a modified Merle D' Aubigné and Postel scale: there were 9 excellent, 11 good and 4 acceptable scores; an excellent rate of 83.3% was achieved.

CONCLUSION

Patients with unstable pelvic fractures combined with acetabular fractures suffer severe trauma and complex mechanisms of injury. Treatment needs to be individualized, taking into account the patient's physiological status, fracture classification and degree of displacement.

Lumbopelvic fixation with S2 alar-iliac screws for U-shaped sacral fractures

OBJECTIVE

To investigate the surgical methods and clinical effects of lumbopelvic fixation (LPF) with S2 alar-iliac (S2AI) screws for U-shaped sacral fractures.

METHODS

From December 2019 to August 2020, 14 patients with U-shaped sacral fractures were treated with LPF using S2AI screws. Demographics, fracture classification, mechanism of injury, surgical treatment, complications and clinical results were assessed. All patients had a LPF with or without nerve decompression. The reduction quality was evaluated according to the Matta criteria. Neurological function was evaluated according to the Gibbons grading. The activities of daily life were evaluated according to the Majeed scoring system at the last follow-up.

RESULTS

Among 14 consecutive patients with U-shaped sacral fractures, the age at injury ranged from 13 to 72 years (average 30.3 ± 17.5 years). There were 4 males and 10 females. All patients were followed up for 6-15 months (average 7.8 ± 2.7 months). Thirteen patients were fixed with bilateral S2AI screws, and one patient was fixed only unilaterally due to unilateral spinopelvic dissociation. The excellent and good rate of postoperative pelvic reduction quality was 92% (excellent 10, good 3, fair 1). At the latest follow-up, the excellent and good rate of pelvic function was 100% (excellent 9, good 5) and all patients achieved different extents of neurological recovery. One patient had a postoperative superficial surgical site infection, which healed after debridement. Radiological examination at 3-6 months after operation showed that all fractures had healed. No complications were found in any patients during follow-up, such as implant fracture, loss of reduction, deep wound infection, wound dehiscence and screw protrusion discomfort.

CONCLUSION

LPF with S2AI screws for the treatment of U-shaped sacral fractures has exhibited distinct advantages, including firm fixation, a low rate of surgical site complications and satisfactory clinical efficacy. This approach provides sufficient stability to accelerate the commencement of postoperative rehabilitation.

Combined Anterior-Posterior versus Posterior-Only Fixation of Stress-Positive Minimally Displaced Lateral Compression Type 1 (LC1) Pelvic Ring Injuries

OBJECTIVES

To compare hospital outcomes and late displacement between stress-positive minimally displaced lateral compression type 1 (LC1) pelvic ring injuries treated with combined anterior-posterior versus posterior-only fixation.

DESIGN

Retrospective comparative cohort.

SETTING

Urban level-one trauma center.

PATIENTS/PARTICIPANTS

LC1 injuries managed operatively.

INTERVENTION

Anterior-posterior versus posterior-only fixation.

MAIN OUTCOME MEASUREMENTS

Physical therapy (PT) clearance, discharge location, hospital length of stay (LOS), inpatient morphine equivalent doses (MED), and fracture displacement at follow-up.

RESULTS

Groups were similar in demographic and injury characteristics (age, high energy mechanism, ASA score, stress displacement, and rami/sacral fracture classifications). Anterior-posterior fixation resulted in longer operative times (median difference (MD): 27.0 minutes, 95% confidence interval (CI): 17.0 to 40.0, P < 0.0001) and had a trend of increased estimated blood loss (MD: 10 mL, CI: 0 to 30, P = 0.07). Patients with anterior-posterior fixation required less inpatient MEDs (MD: -180.0, CI: -341.2 to -15.0, P = 0.02), were more likely to clear PT by discharge (100% vs. 70%, proportional difference (PD): 30%, CI: 2.0%-57.2%, P = 0.02), were less likely to discharge to rehabilitation facilities (0% vs. 30%, PD: 30%, CI: 2.0%-57.2%, P = 0.02), and had a trend of less days to clear PT after surgery (MD: -1, CI: -2 to 0, P = 0.09) and decreased LOS (MD: -1, CI: -4 to 1, P = 0.17). Late fracture displacement did not differ between groups.

CONCLUSION

Anterior-posterior fixation of LC1 injuries was associated with an improved early hospital course-specifically, reduced inpatient opioid use and an increased number of patients who could clear PT and discharge home.

LEVEL OF EVIDENCE

Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

Percutaneous robot-assisted screw fixation for nondisplaced pelvic fractures: a good choice?

PURPOSE

To compare the merits and demerits of percutaneous robot-assisted screw fixation for nondisplaced pelvic fractures with other treatments via long-term follow-up.

METHODS

This was a retrospective analysis of nondisplaced pelvic fractures treated between January 2015 and December 2021. The number of fluoroscopy exposures, operative duration, intraoperative blood loss, surgical complications, screw placement accuracy and Majeed score were compared among the nonoperative group (24 cases), open reduction and internal fixation (ORIF) group (45 cases), free-hand empirical screw fixation (FH) group (10 cases) and robot-assisted screw fixation (RA) group (40 cases).

RESULTS

There was less intraoperative blood loss in the RA and FH groups than in the ORIF group. The number of fluoroscopy exposures in the RA group was lower than that in the FH group but much higher than that in the ORIF group. There were five cases of wound infection in the ORIF group and no surgical complications in the FH or RA group. The medical expenses were higher in the RA group than in the FH group, with no significant difference from the ORIF group. The Majeed score was lowest in the nonoperative group three months after injury (64.5±12.0) but lowest in the ORIF group one year after injury (88.6±4.1).

CONCLUSION

Percutaneous RA for nondisplaced pelvic fractures is effective and minimally invasive and does not increase medical expenses compared with ORIF. Therefore, it is the best choice for patients with nondisplaced pelvic fractures.

Ilioinguinal versus modified Stoppa approach for open reduction and internal fixation of displaced acetabular fractures: a systematic review and meta-analysis of 717 patients across ten studies

BACKGROUND

Acetabulum fracture is one of the most challenging fractures to manage and operate for orthopaedic surgeons; anatomical reduction of fractures and reconstruction of the joint is of utmost importance. These factors in turn are dependent on the appropriate surgical approach used to improve the clinical outcomes and reduce associated complications. Hence, this meta-analysis aims to compare the outcomes of ilioinguinal versus modified Stoppa approach for open reduction and internal fixation (ORIF) of displaced acetabular fractures.

METHODS

Medline (PubMed), Embase, Scopus, and Cochrane Library databases were searched from their inception to 10th of June 2021 for both randomized clinical trials (RCTs) and or non-randomized studies comparing the outcomes of ilioinguinal approach and modified Stoppa approach for the ORIF of acetabular fractures. The estimates of treatment effects were described by mean difference (MD) for continuous variables and odds ratio (OR) for dichotomous variables with corresponding 95% confidence (95% CI) intervals. The risk of bias was assessed by MINORS tool for the non-randomized, and the Cochrane Collaboration's risk of bias tool for RCTs.

RESULT

A total of ten studies (717 patients), three RCTs and seven retrospective studies, were included. Modified Stoppa approach showed shorter mean duration of surgery (MD 47.13, 95% CI: 27.30-66.96), lesser number of overall complications (OR 2.14, 95% CI: 1.46-3.13), less intraoperative blood loss (MD 259.65, 95% CI: 152.66-366.64), and lower rates of infection (OR 2.17, 95% CI: 1.14-4.15). However, ilioinguinal approach showed a better quality of fracture reduction (OR 0.59, 95% CI: 0.42-0.82). Results were equivocal in terms of vascular injuries (OR 1.88 (95% CI: 0.86-4.09), nerve injuries (OR 1.77, 95% CI: 0.99-3.17), heterotopic ossification (OR1.74, 95% CI: 0.63-4.82), and clinical outcome (OR 0.81, 95% CI: 0.45-1.47) between the two groups.

CONCLUSION

Modified Stoppa approach carries a lesser duration of surgery, lesser intraoperative blood loss, fewer overall complications, and lesser postoperative infection rates compared to ilioinguinal approach. Although a better anatomical reduction is achieved by ilioinguinal approach, however, this does not translate into better clinic functional outcomes which remain comparable between the two approaches. So overall, modified Stoppa approach seems a better alternative for managing these fractures.

[Imaging examination procedures, navigation and minimally invasive procedures in acetabular surgery]

Acetabular fractures still pose a special challenge even today. Considering the increasing case numbers, especially in the geriatric patient group, modern imaging examination procedures represent an essential pillar of the diagnostics. Especially in this vulnerable patient group, minimally invasive methods are necessary, which can be guaranteed by intraoperative navigation; however, the choice of surgical access and implants is also made based on the existing morphological characteristics of fractures, which highlights the importance of an imaging modality that is as detailed as possible. Last but not least, new developments concerning the surgical treatment of these injuries are also based on this. This article summarizes the current state of the techniques and the available literature.

Use of calcaneal plates in the treatment of posterior pelvic ring injuries and displaced iliac blade fractures- A case series

Introduction

The operative fixation of pelvic ring injuries and associated acetabulum fractures presents a challenging scenario to most of the orthopaedic trauma surgeons. Current development of anatomically contoured reconstruction (ACR) plates gained popularity in fixing complex pelvic ring fractures. This study was done to assess the functional and radiological outcomes using of lateral wall stainless steel (LWSS) calcaneal plates in posterior pelvic ring injuries and displaced iliac blade fractures.

Materials and methods

Retrospectively selected eight cases of pelvic ring injuries planned for fixing posterior pelvic instability and iliac blade fractures using LWSS plates. Mean follow-up was 18 months (Range 12-26 months).

Results

Average time for radiological bony union achieved in 18 weeks (Range 13-22). Seven patients returned to their normal work. Average Majeed score was 60 (Range 50-68). Mean duration of surgery was 160 min (Range 120-200).

Conclusion

This technique can be routinely used as supplementary fixation for posterior pelvic ring instability and iliac blade fractures. LWSS calcaneal plates showed no screw breakage or implant failure. Further this technique was cost effective in developing countries with limited resources.

Spinopelvic dissociation: extended definition, physical examination, classification, and therapy

BACKGROUND

Spinopelvic dissociation (SPD) is generally caused by high-energy injury mechanisms, and, in the absence of timely diagnosis and treatment, it can lead to chronic pain and progressive deformity. However, SPD is difficult to manage because of its rarity and complexity. In this study, we re-defined SPD according to the mechanism of injuries and biomechanical characteristics of the posterior pelvic ring and developed new classification criteria and treatment principles based on the classification for SPD.

METHODS

Between June 2015 and September 2020, 30 patients with SPD which were selected from 138 patients with pelvic fractures were enrolled. Physical examination was performed, classification criteria (301 SPD classification) were developed, and specific treatment standards were established according to the classifications.

RESULTS

The injury mechanisms and co-existing injuries did not significantly differ between the classical SPD patients and expanded SPD patients. The 301 SPD classification criteria covered all the patients. Fixation by biplanar penetration screws was used in 7 patients, 11 patients received fixation by uniplanar penetration screws, 6 patients used sacroiliac compression screws, 3 patients received uniplanar screws combined with sacroiliac compression screws, and open spondylopelvic fixation was used in only 3 patients. According to the Matta criteria, 19, 7, and 4 patients achieved excellent, good, and fair reduction. The Majeed function score of the patients ranged from 9 to 96 points, and the mean score was 72.9 ± 24.6 points.

CONCLUSION

The expanded definition for SPD is particularly significant for definite diagnosis and prevention of missing diagnosis, based on which the 301SPD classification criteria can more systemically guide the clinical treatment of SPD, increase the treatment efficacy, and reduce surgical trauma. Chinese Clinical Trial Registry: ChiCTR-IPR-16009340.

Robotic guidance for percutaneous placement of triangular osteosynthesis in vertically unstable sacrum fractures: a single-center retrospective study

BACKGROUND

To evaluate the effectiveness and safety of robot-aided percutaneous triangular osteosynthesis combined with close reduction for vertically unstable sacrum fractures (VUSFs).

METHODS

The data on 21 patients of the VUSF were retrospectively analyzed from November 2016 to January 2021. According to Denis classification, there were 3 cases in zone I, 11 cases in zone II, and 7 case in zone III. The main perioperative indicators were recorded. The maximal angulation and displacement deviations of the screws were analyzed by comparing the planned trajectory with the actual position. Postoperative X-ray radiographs and CT scans were obtained for evaluating the reduction quality. Functional outcome was scored with Majeed criterion.

RESULTS

Fourteen patients of the unilateral VUSF and 7 patients of the bilateral VUSF underwent unilateral and bilateral triangular osteosynthesis with robotic assistance, respectively. No intraoperative neurovascular injuries and postoperative infection occurred. All patients were followed up for at least 12 months. The average operation time of posterior pelvic ring was 111.4 min, with the mean intraoperative bleeding of 110.5 ml. A total of 58 pedicle and iliosacral screws were implanted with robotic assistance. Of those, 52 screws were in the cancellous bone except 4 pedicle and 2 iliosacral screws cutting the cortical bone. The angulation and displacement deviations of the screws were 4.2° ± 2.5° and 1.7 ± 0.9 mm, respectively. The average displacement of the sacral fracture was reduced from 19.7 mm preoperatively to 3.1 mm postoperatively. According to Matta's criterion, the reduction quality was graded as "excellent" in 13 patients and "good" in 8. All sacral fractures healed within 6 months except one fracture with nonunion. The mean Majeed score at the last follow-up was 89.6.

CONCLUSIONS

Robot-aided triangular osteosynthesis combined with close reduction provide a safe and reliable option for percutaneous treatment of the fresh VUSF, with a high accuracy of iliosacral and pedicle screw implantation except insertion of iliac screws. Meanwhile, the technique may help to reduce incision-related complications.

Combined anterior and posterior ring fixation versus posterior ring fixation alone in the management of unstable Tile B and C pelvic ring injuries: A randomized controlled trial

PURPOSE

Combined anterior and posterior ring (APR) fixation is classically performed in Tile B2 and C1 injuries to achieve superior biomechanical stability. However, the posterior ring (PR) is the main weight bearing portion that is responsible for weight transmission from the upper parts of the body to the lower limbs through the sacrum and the linea terminalis. It is hypothesized that isolated PR fixation can achieve comparable radiological and clinical outcomes to APR fixation. Therefore, we conducted this study to compare the two fixation principles in managing Tile B2 and C1 injuries.

METHODS

Our study included 20 patients with Tile B2 injuries and 20 patients with Tile C1 injuries. This study was a randomized control single-blinded study via computerized random numbers with a 1:1 allocation by using random block method. The study was performed at a level one trauma center. A total of 40 patients with Tile B2 and C1 injuries underwent combined APR or isolated PR fixation (Group A and B, respectively). Matta & Tornetta radiological principles and Majeed pelvic scoring system were used for the assessment of primary outcomes and postoperative complications. Secondary outcomes included operative time, amount of blood loss, intraoperative assessment of reduction, need of another operation, length of hospital stay, ability to weight bear postoperatively and pain control metrics. We used student t-test to compare the difference in means between two groups, and Chi-square test to compare proportions between two qualitative parameters. We set the confidence interval to 95% and the margin of error accepted to 5%. So, p ≤ 0.05 was considered statistically significant.

RESULTS

The mean follow-up duration was 18 months. The operative time (mean difference 0.575 h) and the intraoperative blood loss (mean difference 97.5 mL) were lower in Group B. Also, despite the higher frequency of rami displacement before union in the same group, there were no significant differences in terms of radiological outcome (excellent outcome with OR = 2.357), clinical outcome (excellent outcome with OR = 2.852) and postoperative complications assessment (OR = 1.556) at last follow-up.

CONCLUSION

The authors concluded that isolated PR fixation could favorably manage Tile B2 and C1 pelvic ring injuries with Nakatani zone II pubic rami fractures and intact inguinal ligament. Its final radiological and clinical outcomes and postoperative complications were comparable to combined APR fixation, but with less morbidity (shorter operation time, lower amount of blood, and no records of postoperative wound infection).

Modified percutaneous iliosacral screw and anterior internal fixator technique for treating unstable pelvic fractures: a retrospective study

BACKGROUND

The commonly used technique for treating unstable pelvic fractures with sacroiliac screws and anterior internal fixator (INFIX) is prone to complications, such as injury to the pelvic vasculature and nerves, life-threatening bleeding, lateral femoral cutaneous neuritis, and wound infection. This study investigated the clinical effects of using a modified percutaneous iliosacral screw and INFIX technique for treating unstable pelvic fractures.

METHODS

A retrospective analysis of minimally invasive internal fixation using modified incision of an anterior-ring INFIX application combined with modified percutaneous iliosacral screw placement was performed for 22 cases of unstable pelvic fractures from January 2017 to December 2018. Based on the Tile classification, there were 4 type B1, 7 type B2, 5 type B3 and 6 type C1 injuries. Preoperatively, the length and orientation of the internal fixation were computer-simulated and measured. On postoperative day 3, pelvic radiographs and three-dimensional computed tomograms were used to assess fracture reduction and fixation. All patients were regularly followed up at 4 weeks, 12 weeks, 6 months, 12 months, 24 months and annually thereafter. Fracture healing, complications, visual analogue scale (VAS) scores, the quality of fracture repositioning and Majeed score were assessed during follow-up.

RESULTS

All patients were followed up for a mean of 25.23 ± 1.48 months. All fractures healed without loss of reduction and no patient showed evidence of delayed union or nonunion. Two years postoperatively, the mean VAS score was 0.32 ± 0.09 and the mean Majeed score was 94.32 ± 1.86.

CONCLUSION

The modified percutaneous iliosacral screw technique increases the anterior tilt of the sacroiliac screw by shifting the entry point posteriorly to increase the safety of the screw placement. Downward modification of the INFIX incision reduces the risk of lateral femoral cutaneous nerve injury. This technique is safe, effective and well tolerated by patients.

Lumbopelvic Fixation with Bridged Distal Iliac Screws for Vertically Unstable Sacral Fractures

Purpose

The purpose of this study is to evaluate preliminary outcomes of vertically unstable sacral fractures treated by lumbopelvic fixation (LPF) augmented transiliac bridged screws.

Methods

From April 2017 to December 2019, fifteen consecutive patients with vertically unstable sacral fractures who had undergone LPF augmented transiliac bridged screws were enrolled. The radiological assessment included standard lumbopelvic x-rays and pelvic computed tomography (CT) to evaluate the lumbosacral angle (LSA), sacral kyphosis angle (SKA), lumbar lordosis angles (LLA) and Matta's reduction criterias (MRC). Clinical and neurologic impairment outcomes were evaluated by the Majeed grading scale (MGS) and Gibbons criterias, respectively.

Results

All patients were followed for an average of 18 months (range, 14-25). All sacral fractures eventually healed and implant failure did not occur in any patient, though there were two patients with a loss of reduction (< 5 mm) during the follow-up period. According to the MRC, the results were excellent on 14 sides, good on five sides, and fair on one side. The MGS mean score was 82 points (range, 49-98 points); the results were excellent in nine cases, good in four cases, and fair in two cases. There was no statistically significant difference in SKA and LLA in preoperative and postoperative final controls. The preoperative and postoperative LSA were 72 ± 13.9 and 44.1 ± 11.3, respectively, and a statistically significant improvement was observed (p = 0.01).

Conclusion

In vertically unstable sacrum fractures, we believe that LPF augmented with transiliac bridging technique may expedite the reduction of vertical sacrum fracture and offers a reinforced fixation choice.

Prospective Characterization of Pain and Function in Patients With Unstable Pelvic Fractures Treated With Posterior Screw Fixation

OBJECTIVES

Describe patient-reported pain and function within 24 months of a pelvic fracture treated with posterior screw fixation and identify factors associated with increased pain.

DESIGN

Prospective case series.

SETTING

Academic trauma center.

PATIENTS/INTERVENTION

Eighty-eight patients with adult pelvic fracture treated with sacroiliac or transiliac screws.

MAIN OUTCOME MEASURES

Average pain measured with the Brief Pain Inventory (BPI); function measured with the Majeed Pelvic Outcome Score from 6 to 24 months postinjury.

RESULTS

The mean pain from 6 to 24 months postinjury was 2.22 on the 10-point BPI scale (95% CI, 0.64-3.81). Sixty-nine patients (78.4%) reported mild to no pain at 6 months; 12 (13.6%) patients had severe pain. Two years after injury, 71 patients (80.6%) exhibited mild to no pain. Within 24 months of injury, the mean pelvic function was 71 on the 100-point Majeed scale (95% CI, 60-82). Half of the sample (n = 44) had good to excellent pelvis function by 6 months postinjury; 55 patients (62.5%) attained this level of function by 24 months. A history of chronic pain (1.31; 95% CI, 0.26-2.37; P = 0.02), initial fracture displacement (≥5 mm) (0.99; 95% CI, 0.23-1.69; P = 0.01), and socioeconomic deprivation (0.28; 95% CI, 0.11-0.44; P < 0.01) were significantly associated with increased pain.

CONCLUSION

Our findings suggest that most patients with unstable pelvic ring fractures treated with posterior screw fixation achieve minimal to no pelvis pain and good to excellent pelvic function 6-24 months after injury.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.