Assessment of the performance of a rapid, lateral flow assay for the detection of antibodies to HIV

Lateral Flow Genochromatographic Strip for Naked-Eye Detection of Mycobacterium Tuberculosis PCR Products with Gold Nanoparticles as a Reporter

Background

Mycobacterium tuberculosis (MTB) is a pathogen causing tuberculosis (TB) in human, and TB can cause enormous social and economic disruptions. Lateral flow test strips (LFTSs) are inexpensive, portable, disposable, rapid, and easy-to-use analytical tools.

Objective

LFTSs were prepared for the detection of MTB. LFTSs were fabricated using a new specific probe for MTB H37Rv, based on IS6110 sequence gene, and tailed with poly deoxyadenine (dA).

Material and Methods

In this experimental study, to create test and control zones, streptavidin (STP) and a 150-mer dA were dotted on a nitrocellolose membrane. Gold nanoparticles (GNPs) were conjugated with poly deoxythymidine sequence and placed on the conjugate pad. The composition of immersion buffers for sample pad and conjugate pad, running solution, solutions of GNPs-S-dT150 and STP were introduced. DNA genome of MTB and Mycobacterium bovis in clinical samples was amplified with PCR, and then detected by the LFTSs. During the assay, samples were firstly hybridized in two steps and then placed on a conjugate pad in a manner that positive and negative samples provided two and one red lines, respectively, on the detection pad.

Results

After PCR reaction with biotinylated primer, hybridization process with specific MTB probe-dA70-100 toke 10 min, and running process on the strip was performed within 5 min.

Conclusion

We showed that LFTS can discriminate a particular bacteria strain from others. The LFTSs can be redesigned for detection of other pathogenic genomes.

Recent advances in nanoparticle-based lateral flow immunoassay as a point-of-care diagnostic tool for infectious agents and diseases

Recent advances in lateral flow immunoassay-based devices as a point-of-care analytical tool for the detection of infectious diseases are reviewed.

Reducing Uncertainty for Acute Febrile Illness in Resource-Limited Settings: The Current Diagnostic Landscape

AbstractDiagnosing the cause of acute febrile illness in resource-limited settings is important-to give the correct antimicrobials to patients who need them, to prevent unnecessary antimicrobial use, to detect emerging infectious diseases early, and to guide vaccine deployment. A variety of approaches are yielding more rapid and accurate tests that can detect more pathogens in a wider variety of settings. After decades of slow progress in diagnostics for acute febrile illness in resource-limited settings, a wave of converging advancements will enable clinicians in resource-limited settings to reduce uncertainty for the diagnosis of acute febrile illness.

Liposome-Enhanced Lateral-Flow Assays for Clinical Analyses

Clinical and environmental analyses frequently necessitate rapid, simple, and inexpensive point-of-care or field tests. These semiquantitative tests may be later followed up by confirmatory laboratory-based assays, but provide an initial scenario assessment important for resource mobilization and threat confinement. Lateral-flow assays (LFAs) and dip-stick assays, which are typically antibody-based and yield a visually detectable signal, provide an assay format suiting these applications extremely well. Signal generation is commonly obtained through the use of colloidal gold or latex beads, which yield a colored band either directly proportional or inversely proportional to the concentration of the analyte of interest. Here, dye-encapsulating liposomes as a highly visible alternative are discussed. The semiquantitative LFA biosensor described in this chapter relies on a sandwich immunoassay for the detection of myoglobin in whole blood. After an acute myocardial infarction (AMI) event, several cardiac markers are released into the blood, the most common of which are troponin, creatine kinase MB, C-reactive protein, and myoglobin. Due to its early release, myoglobin has value as an indicator of a recent heart attack amongst conditions which present with similar symptoms and its lack of elevation can effectively rule out a heart attack (Brogan et al., Ann Emerg Med 24:665-671, 1994). The assay described within relies on sandwich complex formation between a membrane immobilized capture monoclonal antibody against myoglobin, a detector biotinylated monoclonal antibody against a different epitope on myoglobin, and streptavidin-conjugated visible dye (sulforhodamine B)-encapsulating liposomes to allow for signal generation.

Use of rapid HIV antibody testing for controlling the HIV pandemic

The HIV pandemic continues to expand throughout Africa and southern Asia. Despite recent advances in therapy, the primary means of prevention continues to be the identification of infected patients through diagnostic testing, and the provision of counseling services to reduce HIV transmission. In order to facilitate the identification of infected patients, great strides have been made during the past 10 years towards the development of simple, rapid HIV antibody assays that require no specialized equipment, are relatively stable at ambient temperatures and can be easily performed by people who do not have a laboratory background. Evaluations of these assays have shown that when used in multiple assay algorithm strategies, they perform comparably with current laboratory-based methods. Effective global implementation of these tests will require a concerted effort from public and private health agencies, however, expanding the use of these assays can provide a significant opportunity to slow the devastating spread of HIV.

Interlaboratory and interstudy reproducibility of a novel lateral-flow device and influence of antifungal therapy on detection of invasive pulmonary aspergillosis

Interest in lateral-flow devices (LFDs) as potential point-of-care assays for the diagnosis of infectious diseases has increased. Our objective was to evaluate the interlaboratory and interstudy reproducibility and the effects of antifungal therapy on an LFD developed for invasive pulmonary aspergillosis (IPA) detection. An established neutropenic guinea pig model of IPA caused by Aspergillus fumigatus was used. At predetermined time points (1 h and 3, 5, and 7 days postinoculation), blood and bronchoalveolar lavage (BAL) fluid were collected from infected and uninfected animals. In a separate experiment, guinea pigs were treated with posaconazole (10 mg/kg of body weight orally [p.o.] twice a day [BID]), voriconazole (10 mg/kg p.o. BID), liposomal amphotericin B (10 mg/kg intraperitoneally [i.p.] once a day [QD]), or caspofungin (2 mg/kg i.p. QD), and samples were collected on days 7 and 11. Each laboratory independently evaluated the IgG monoclonal antibody-based LFD. Galactomannan and (1 → 3)-β-D-glucan were also measured using commercially available kits. Good interlaboratory agreement was observed with the LFD, as the results for 97% (32/33) of the serum and 78.8% (26/33) of the BAL fluid samples from infected animals were in agreement. Good interstudy agreement was also observed. The serum sensitivity of each surrogate-marker assay was reduced in animals treated with antifungals. In contrast, these markers remained elevated within the BAL fluids of treated animals, which was consistent with the fungal burden and histopathology results. These results demonstrate that the LFD assay is reproducible between different laboratories and studies. However, the sensitivity of this assay and other markers of IPA may be reduced with serum in the presence of antifungal therapy.

Detection of invasive pulmonary aspergillosis in haematological malignancy patients by using lateral-flow technology

Invasive pulmonary aspergillosis (IPA) is a leading cause of morbidity and mortality in haematological malignancy patients and hematopoietic stem cell transplant recipients¹. Detection of IPA represents a formidable diagnostic challenge and, in the absence of a 'gold standard', relies on a combination of clinical data and microbiology and histopathology where feasible. Diagnosis of IPA must conform to the European Organization for Research and Treatment of Cancer and the National Institute of Allergy and Infectious Diseases Mycology Study Group (EORTC/MSG) consensus defining "proven", "probable", and "possible" invasive fungal diseases². Currently, no nucleic acid-based tests have been externally validated for IPA detection and so polymerase chain reaction (PCR) is not included in current EORTC/MSG diagnostic criteria.

Identification of Aspergillus in histological sections is problematic because of similarities in hyphal morphologies with other invasive fungal pathogens³, and proven identification requires isolation of the etiologic agent in pure culture. Culture-based approaches rely on the availability of biopsy samples, but these are not always accessible in sick patients, and do not always yield viable propagules for culture when obtained.

An important feature in the pathogenesis of Aspergillus is angio-invasion, a trait that provides opportunities to track the fungus immunologically using tests that detect characteristic antigenic signatures molecules in serum and bronchoalveolar lavage (BAL) fluids. This has led to the development of the Platelia enzyme immunoassay (GM-EIA) that detects Aspergillus galactomannan and a 'pan-fungal' assay (Fungitell test) that detects the conserved fungal cell wall component (1 →3)-β-D-glucan, but not in the mucorales that lack this component in their cell walls^1,4. Issues surrounding the accuracy of these tests^1,4-6 has led to the recent development of next-generation monoclonal antibody (MAb)-based assays that detect surrogate markers of infection^1,5.

Thornton⁵ recently described the generation of an Aspergillus-specific MAb (JF5) using hybridoma technology and its use to develop an immuno-chromatographic lateral-flow device (LFD) for the point-of-care (POC) diagnosis of IPA. A major advantage of the LFD is its ability to detect activity since MAb JF5 binds to an extracellular glycoprotein antigen that is secreted during active growth of the fungus only⁵. This is an important consideration when using fluids such as lung BAL for diagnosing IPA since Aspergillus spores are a common component of inhaled air. The utility of the device in diagnosing IPA has been demonstrated using an animal model of infection, where the LFD displayed improved sensitivity and specificity compared to the Platelia GM and Fungitell (1 → 3)-β-D-glucan assays⁷.

Here, we present a simple LFD procedure to detect Aspergillus antigen in human serum and BAL fluids. Its speed and accuracy provides a novel adjunct point-of-care test for diagnosis of IPA in haematological malignancy patients.

Liposome-enhanced lateral-flow assays for the sandwich-hybridization detection of RNA

Clinical and environmental analyses frequently necessitate rapid, simple, and inexpensive point-of-care or field tests. These semiquantitative tests may be later followed up by confirmatory laboratory-based assays, but can provide an initial scenario assessment important for resource mobilization and threat confinement. Lateral-flow assays (LFAs) and dip-stick assays, which are typically antibody-based and yield a visually detectable signal, provide an assay format suiting these applications extremely well. Signal generation is commonly obtained through the use of colloidal gold or latex beads, which yield a colored band either directly proportional or inversely proportional to the concentration of the analyte of interest. Here, dye-encapsulating liposomes as an alternative are discussed. The LFA biosensors described in this chapter rely on the sandwich-hybridization of a nucleic acid sequence-based amplified (NASBA) mRNA target between a membrane immobilized capture probe and a visible dye (sulforhodamine B)-encapsulating liposome conjugated reporter probe. Although the methodology of this chapter is focused on LFAs for the detection of RNA through sandwich hybridization, the information within can be readily adapted for sandwich and competitive immunoassays. Included are an introduction and application notes toward this end. These include notes ranging from the detection of nonamplified RNA and single-stranded DNA, conjugation protocols for antibodies and other proteins to liposomes, and universal assay formats.

Immunochromatographic lateral flow strip tests

The immunochromatographic lateral flow strip test is a one-step test that facilitates low-cost, rapid identification of various analytes at the point of care. We have developed lateral flow strip tests for the specific qualitative or semiquantitative detection of antigens, antibodies, and haptens, such as drug residues. Here, we describe in detail the preparation of three examples of the strip tests for detection of (a) the infectious bursal disease virus; (b) Trichinella specific antibodies, and (c) Clenbuterol residues in urine samples.

New tools for rapid clinical and bioagent diagnostics: microwaves and plasmonic nanostructures

In this timely review, we summarize recent work on ultra-fast and sensitive bioassays based on microwave heating, and provide our current interpretation of the role of the combined use of microwave energy and plasmonic nanostructures for applications in rapid clinical and bioagent diagnostics. The incorporation of microwave heating into plasmonic nanostructure-based bioassays brings new advancements to diagnostic tests. A temperature gradient, created by the selective heating of water in the presence of plasmonic nanostructures, results in an increased mass transfer of target biomolecules towards the biorecognition partners placed on the plasmonic nanostructures, enabling diagnostic tests to be completed in less than a minute, and in some cases only a few seconds, by further microwave heating. The diagnostic tests can also be run in complex biological samples, such as human serum and whole blood.

Development of an immunochromatographic lateral-flow device for rapid serodiagnosis of invasive aspergillosis

Aspergillus fumigatus is a cosmopolitan saprotrophic fungus that is second only to Candida species as a cause of invasive fungal infections in immunocompromised humans. Current immunodiagnostic tests for invasive aspergillosis (IA) are based on the detection of circulating galactomannan (GM) in a patient's serum by using a rat monoclonal antibody (MAb), EB-A2, that binds to tetra (1-->5)-beta-D-galactofuranoside, the immunodominant epitope in GM. The potential cross-reactivity of MAb EB-A2 with non-Aspergillus fungi, with contaminating GM in beta-lactam antibiotics and foodstuffs, and with bacterial lipoteichoic acids has prompted efforts to discover non-GM antigens that can act as surrogate markers for the diagnosis of IA. This paper describes the development of a mouse MAb, JF5, that binds to a protein epitope present on an extracellular glycoprotein antigen secreted constitutively during the active growth of A. fumigatus. The MAb was used to develop an immunochromatographic lateral-flow device (LFD) for the rapid (15-min) detection of Aspergillus antigens in human serum. The test is highly specific, reacting with antigens from Aspergillus species but not with antigens from a large number of clinically important fungi, including Candida species, Cryptococcus neoformans, Fusarium solani, Penicillium marneffei, Pseudallescheria boydii, and Rhizopus oryzae. The LFD was able to detect circulating antigen in serum samples from patients suspected of having or shown to have IA on the basis of their clinical symptoms and results from tests for GM and fungal (1-->3)-beta-D-glucan. The ease of use of the LFD provides a diagnostic platform for the routine testing of vulnerable patients who have an elevated risk of IA.

Rapid HIV screening for women in labor

Women now comprise approximately half of all HIV-infected individuals and the epidemic of pediatric HIV disease continues unabated in the developing world. The issue of mother-to-child transmission has been a major concern for public health officials since the early years of this epidemic. Not uncommonly, the first opportunity to ascertain the HIV status is when a woman presents to a hospital in labor. Rapid HIV tests can provide fast results, allowing time for the provider to offer antiretroviral therapy. Several effective antiretroviral regimens are now available for the intrapartum patient whose rapid HIV test comes back as positive. Antiretroviral therapy should be initiated as soon as possible after a positive rapid HIV test result and prior to standard confirmatory testing. This article summarizes the epidemiology of HIV and focuses on testing policies, technologies for rapid screening for HIV infection and antiretroviral regimens that can reduce the risk of perinatal transmission from the intrapartum patient whose rapid HIV test comes back positive.

A disposable microfluidic cassette for DNA amplification and detection

A pneumatically driven, disposable, microfluidic cassette comprised of a polymerase chain reaction (PCR) thermal cycler, an incubation chamber to label PCR amplicons with up-converting phosphor (UPT) reporter particles, conduits, temperature-activated, normally closed hydrogel valves, and a lateral flow strip, was constructed and tested. The hydrogel valves, which were opened and closed with the aid of electrically controlled thermoelectric units, provided a simple means to seal the PCR reactor and suppress bubble formation. The hydrogel-based flow control was electronically addressable, leakage-free, and biocompatible. To test the device, a solution laden with genomic DNA isolated from B. cereus was introduced into the microfluidic cassette and a specific 305 bp fragment was amplified. The PCR amplicons were labelled with the phosphor (UPT) reporter particles, applied to the lateral flow strip, bound to pre-immobilized ligands, and detected with an IR laser that scanned the lateral flow strip and excited the phosphor (UPT) particles that, in turn, emitted light in the visible spectrum. The UPT particles do not bleach, they provide a permanent record, and they readily facilitate the filtering of background noise. The cassette described herein will be used for rapid testing at the point of care.

Comparison of the RSV respi-strip with direct fluorescent-antigen detection for diagnosis of respiratory syncytial virus infection in pediatric patients

The RSV Respi-Strip was compared to the SimulFluor respiratory screen for detecting respiratory syncytial virus in nasopharyngeal aspirates from pediatric patients. Of samples tested, 115/239 (49%) were positive by direct fluorescent-antigen detection. The sensitivity and specificity of the RSV Respi-Strip were 92% (95% confidence interval [CI], 86% to 96%) and 98% (95% CI, 94% to 100%), respectively, with a diagnostic efficiency of 95%.

Evaluation of lateral-flow Clostridium botulinum neurotoxin detection kits for food analysis

The suitability and sensitivity of two in vitro lateral-flow assays for detecting Clostridium botulinum neurotoxins (BoNTs) in an assortment of foods were evaluated. Toxin extraction and preparation methods for various liquid, solid, and high-fat-content foods were developed. The lateral-flow assays, one developed by the Naval Medical Research Center (Silver Spring, MD) and the other by Alexeter Technologies (Gaithersburg, MD), are based on the immunodetection of BoNT types A, B, and E. The assays were found to be rapid and easy to perform with minimum requirements for laboratory equipment or skills. They can readily detect 10 ng/ml of BoNT types A and B and 20 ng/ml of BoNT type E. Compared to other in vitro detection methods, these assays are less sensitive, and the assessment of a result is strictly qualitative. However, the assay was found to be simple to use and to require minimal training. The assays successfully detected BoNT types A, B, and E in a wide variety of foods, suggesting their potential usefulness as a preliminary screening system for triaging food samples with elevated BoNT levels in the event of a C. botulinum contamination event.

Analysis of lateral flow biodetectors: competitive format

Lateral flow (LF) biodetectors facilitate low-cost, rapid identification of various analytes. The LF cell consists of a porous membrane containing immobilized ligands at various locations. Through the action of capillary forces, a mixture of sample and reporter particles is transported to the ligand sites, where the target analytes and the reporters bind to the immobilized ligand. The concentration of the reporters is measured with a scanner. A mathematical model for two different competitive assays is constructed and used to study the performance of LF devices under various operating conditions. The model predicts the signal magnitude as a function of target analyte, reporter, and ligand concentrations, reaction rate constants, and flow rate. The predictions are compared and qualitatively agree with experimental data. The model provides insights into various experimental observations. Furthermore, the model can be used to optimize the performance of LF devices and to inexpensively and rapidly test the system under various operating conditions.

Evaluation of three rapid tests for detection of antibodies to HIV-1 non-B subtypes

Three rapid tests were evaluated for the detection of antibodies to HIV in 111 plasma specimens (81 HIV-1 non-B subtypes, including 4 coinfections with HIV-2, 30 HIV negative). The Determine HIV-1/2, Equipar HIV, and Multispot HIV-1/2 tests were 100% sensitive and specific for the detection of HIV-1 antibodies. Multispot showed 92.7% specificity for HIV-2.

A mathematical model of lateral flow bioreactions applied to sandwich assays

Lateral flow (LF) biodetectors facilitate low-cost, rapid identification of various analytes at the point of care. The LF cell consists of a porous membrane containing immobilized ligands at various locations. Through the action of capillary forces, samples and reporter particles are transported to the ligand sites. The LF membrane is then scanned or probed, and the concentration of reporter particles is measured. A mathematical model for sandwich assays is constructed and used to study the performance of the LF device under various operating conditions. The model provides insights into certain experimental observations including the reduction in the level of the detected signal at high target analyte concentrations. Furthermore, the model can be used to test rapidly and inexpensively various operating conditions, assist in the device's design, and optimize the performance of the LF device.

Development of a quantitative lateral-flow assay for rapid detection of fatty acid-binding protein

Using human heart-type fatty acid-binding protein (H-FABP) as an early cardiac marker to confirm or exclude a diagnosis of acute myocardial infarction (AMI) soon after admission requires a rapid assay system. Due to the requirement of skillful technicians and complicated assay procedures, most immunochemical assays for H-FABP are of limited use for routine clinical practice. In the present study, we describe a rapid lateral-flow assay for detection of H-FABP. Fifty-one human samples were evaluated using a conventional ELISA and a newly developed lateral-flow assay. A good agreement between the two methods was found according to Bland and Altman plot. The correlation found was y=0.9685 x -0.6270 (r(2)=0.9585). The detector antibody labeled with colloidal gold was mixed with those without label to extend the linear range of the calibration curve up to 125 microg/l H-FABP with r(2)=0.9832. The detection limit of the assay was 2.8 microg/l. The test-strips can be stored either at 4 degrees C and room temperature for up to 1 year without significant loss of activity. Finally, a one-step FABP test so-called CardioDetect(R), which was derived from the serum lateral-flow assay has been designed for qualitative determination of H-FABP in whole blood samples. It requires no sample pretreatment and gives results within 15 min. Thirty-eight patients presenting with chest pain and suspected AMI were studied. Using an upper reference level of 7 microg/l, the specificity of the rapid test was 94%. Both sensitivity and negative predictive value (NPV) were 100%, implying that 100% of non-AMI patients could be excluded with no false-negative results. With this rapid and sensitive immunotest, H-FABP could soon be introduced into clinical practice.

Improved classification of recent HIV-1 infection by employing a two-stage sensitive/less-sensitive test strategy

Current serologic techniques for the classification of recent HIV-1 infection produce some misclassifications, and, together with the loss to follow-up of individuals, results in decreased enrollment of HIV-infected persons into appropriate intervention programs. We report on the development of a sensitive/less sensitive (S/LS) test strategy that includes a rapid assay to quickly identify persons most likely to have recent infection, followed by an enzyme immunoassay (EIA) with exquisite specificity. The Uni-Gold Recombigen HIV rapid assay (UG; Trinity Biotech, Dublin, Ireland) was procedurally-modified and calibrated as an LS test to differentiate recent (<133 days) from established HIV infections using 178 samples from persons with known dates of infection. This method correctly classified 83.0% of recent infections, but with a high misclassification rate of persons with established infection. By performing the rapid test followed by a modified S/LS EIA, the positive predictive value of the combined results for recent infections was increased to 100%. This two-stage testing algorithm can result in an increased efficiency for the enrollment of recent infection cases over a standard EIA S/LS method alone due to provisional enrollment during an initial testing visit, and because of an increased accuracy for identifying truly recent infections. We conclude that the rapid S/LS assay provides a tool for capturing recent infection cases quickly and is particularly valuable in resource-limited settings, and that the two-stage strategy provides a more accurate identification of persons with recent HIV infection.