Improvement of Physical and Wound Adhesion Properties of Silk Sericin and Polyvinyl Alcohol Dressing Using Glycerin

The Impact of Green Physical Crosslinking Methods on the Development of Sericin-Based Biohydrogels for Wound Healing

Silk sericin (SS)-based hydrogels show promise for wound healing due to their biocompatibility, moisture regulation, and cell proliferation properties. However, there is still a need to develop green crosslinking methods to obtain non-toxic, absorbent, and mechanically strong SS hydrogels. This study investigated the effects of three green crosslinking methods, annealing treatment (T), exposure to an absolute ethanol vapor atmosphere (V.E), and water vapor (V.A), on the physicochemical and mechanical properties of SS and poly (vinyl alcohol) (PVA) biohydrogels. X-ray diffraction and Fourier-transform infrared spectroscopy were used to determine chemical structures. Thermal properties and morphological changes were studied through thermogravimetric analysis and scanning electron microscopy, respectively. The water absorption capacity, mass loss, sericin release in phosphate-buffered saline (PBS), and compressive strength were also evaluated. The results showed that physical crosslinking methods induced different structural transitions in the biohydrogels, impacting their mechanical properties. In particular, V.A hydrogen presented the highest compressive strength at 80% deformation owing to its compact and porous structure with crystallization and bonding sites. Moreover, both the V.A and T hydrogels exhibited improved absorption capacity, stability, and slow SS release in PBS. These results demonstrate the potential of green physical crosslinking techniques for producing SS/PVA biomaterials for wound healing applications.

Box-Behnken design to optimize the cross-linked sodium alginate/mucilage/Aloe vera film: Physical and mechanical studies

The crosslinked sodium alginate/mucilage/Aloe vera/glycerin was optimized by different ratios of each factor to be an absorption wound dressing base for infected wound healing. Mucilage was extracted from seeds of Ocimum americanum. The Box-Behnken design (BBD) in response surface methodology (RSM) was used to construct an optimal wound dressing base with the target ranges of mechanical and physical properties of each formulation. The independent variables selected were sodium alginate (X1: 0.25-0.75 g), mucilage (X2: 0.00-0.30 g), Aloe vera (X3: 0.00-0.30 g), and glycerin (X4: 0.00-1.00 g). The dependent variables were tensile strength (Y1: low value), elongation at break (Y2: high value), Young's modulus (Y3: high value), swelling ratio (Y4: high value), erosion (Y5: low value), and moisture uptake (Y6: high value). The results showed that the wound dressing base with the most desirable response consists of sodium alginate (59.90 % w/w), mucilage (23.96 % w/w), and glycerin (16.14 % w/w) without Aloe vera gel powder (0.00 % w/w).

Preparation of nanocomposite membranes loaded with taxifolin liposome and its mechanism of wound healing in diabetic mice

In this study, a new wound dressing was developed to speed up the healing process of diabetic wounds. First of all, taxifolin liposome (TL) was manufactured in this study. Then, taxifolin (TAX) and TL were mixed with polyvinyl alcohol (PVA) and chitosan (CS) by electrostatic spinning to prepare nanocomposite membranes. Finally, the mechanism of nanocomposite membranes to accelerate diabetic wound healing was investigated. The diameter of TL-loaded polyvinyl alcohol/chitosan nanocomposite membranes (PVA/CS/TL) was 429.43 ± 78.07 nm. The results of in vitro experiments demonstrated that the PVA/CS/TL had better water absorption, water vapor transmission rate (WVTR), porosity, hydrophilicity, mechanical properties, slow-release, antioxidant capacity, and antibacterial properties. The results of in vivo experiments demonstrated that the wound healing rate of mice treated with PVA/CS/TL for eighteen days was 98.39 ± 0.34 %. Histopathological staining, immunohistochemical staining, and western blot experiments also demonstrated that PVA/CS/TL could promote wound healing in diabetic mice by inhibiting the activation of inhibitor kappa B alpha (IκBα)/nuclear factor-kappa B (NF-κB) signaling pathway and related pro-inflammatory factors to increase the expression of CD31 and VEGF in skin tissues. These results suggested that PVA/CS/TL could be a potential candidate for wound dressing to promote chronic skin wound healing.

Silk sericin-based materials for biomedical applications

Silk sericin, a natural protein extracted from silkworm cocoons, has been extensively studied and utilized in the biomedical field because of its superior biological activities and controllable chemical-physical properties. Sericin is biocompatible and naturally cell adhesive, enabling cell attachment, proliferation, and differentiation in sericin-based materials. Moreover, its abundant functional groups from variable amino acids composition allow sericin to be chemically modified and cross-linked to form versatile constructs serving as alternative matrixes for biomedical applications. Recently, sericin has been constructed into various types of biomaterials for tissue engineering and regenerative medicine, including various bulk constructions (films, hydrogels, scaffolds, conduits, and devices) and micro-nano formulations. In this review, we systemically summarize the properties of silk sericin, introduce its different forms, and demonstrate their newly-developed as well as potential biomedical applications.

Wound dressing adherence: a review

Wound dressing adherence is an important problem that is frequently encountered in wound care, and is associated with both clinical and economic burdens. However, only a few review articles have focused on this issue. The objective of this review was to present a comprehensive discussion of wound dressing adherence, including the mechanism of dressing adherence, adverse consequences (clinical burdens and economic burdens), factors affecting adherence (dressing-, patient- and wound-related factors, and factors related to the wound care procedure), tests to assess dressing adherence (in vitro assay, in vivo assay and clinical trials), and reduction of wound adherence (modification of dressing adherence and special care in particular patients). Accordingly, this review article emphasises an awareness of dressing adherence, and is intended to be an informative source for the development of new dressings and for wound management.

Simvastatin nanoparticles loaded polymeric film as a potential strategy for diabetic wound healing: in vitro and in vivo evaluation

INTRODUCTION

The pleiotropic effects of statins are recently explored for wound healing through angiogenesis and lymph-angiogenesis that could be of great importance in diabetic wounds.

AIM

Aim of the present study is to fabricate nanofilm embedded with simvastatin loaded chitosan nanoparticles (CS-SIM-NPs) has been reported herein to explore the efficacy of SIM in diabetic wound healing.

METHODS

The NPs, prepared via ionic gelation, were 173nm ± 2.645 in size with a zeta potential -0.299 ± 0.009 and PDI 0.051 ± 0.088 with excellent encapsulation efficiency (99.97%). The optimized formulation (CS: TPP, 1:1) that exhibited the highest drug release (91.64%) was incorporated into polymeric nanofilm (HPMC, Sodium alginate, PVA), followed by in vitro characterization. The optimized nanofilm was applied to the wound created on the back of diabetes-induced (with alloxan injection 120 mg/kg) albino rats.

RESULTS

The results showed significant (p < 0.05) improvement in the wound healing process compared to the diabetes-induced non-treated group. The results highlighted the importance of nanofilms loaded with SIM-NPs in diabetic wound healing through angiogenesis promotion at the wound site.

CONCLUSION

Thus, CS-SIM-NPs loaded polymeric nanofilms could be an emerging diabetic wound healing agent in the industry of nanomedicines.

Bioaerogels: Promising Nanostructured Materials in Fluid Management, Healing and Regeneration of Wounds

Wounds affect one's quality of life and should be managed on a patient-specific approach, based on the particular healing phase and wound condition. During wound healing, exudate is produced as a natural response towards healing. However, excessive production can be detrimental, representing a challenge for wound management. The design and development of new healing devices and therapeutics with improved performance is a constant demand from the healthcare services. Aerogels can combine high porosity and low density with the adequate fluid interaction and drug loading capacity, to establish hemostasis and promote the healing and regeneration of exudative and chronic wounds. Bio-based aerogels, i.e., those produced from natural polymers, are particularly attractive since they encompass their intrinsic chemical properties and the physical features of their nanostructure. In this work, the emerging research on aerogels for wound treatment is reviewed for the first time. The current scenario and the opportunities provided by aerogels in the form of films, membranes and particles are identified to face current unmet demands in fluid managing and wound healing and regeneration.

Development of Gelatin-Silk Sericin Incorporated with Poly(vinyl alcohol) Hydrogel-Based Nanocomposite for Articular Cartilage Defects in Rat Knee Joint Repair

Sericin, a silk protein, has a high potential for use as an extracellular matrix in tissue engineering applications. In this study, novel gelatin (GEL) and silk sericin (SS) were incorporated with a polyvinyl alcohol) PVA hydrogel nanocomposite (GEL-SS-PVA) scaffold that can be applied to repair cartilage. Glutaraldehyde was used as a cross-linking agent, with hydrochloric acid acting as an initiator. The microstructure characteristics of the obtained GEL-SS and GEL-SS-PVA scaffolds were also examined using FTIR and XRD spectra and their enhanced thermal stability was assessed by TGA. The blended GEL-SS and GEL-SS-PVA scaffolds were confirmed by SEM analysis to be highly porous with optimum pore sizes of 172 and 58 µm, respectively. Smaller pore sizes and improved uniformity were observed as the concentration of PVA in the GEL-SS-PVA scaffold increased. PVA decreased the tensile strength and elongation of the membranes but increased the modulus. Swelling studies showed high swellability and complete degradation in the presence of phosphate-buffered saline. Cytocompatibility of the GEL-SS-PVA scaffolds showed that these had the highest potential to promote cell proliferation as evaluated with standard microscopy using L929 fibroblasts. The prepared GEL-SS composite scaffold incorporated with the PVA hydrogel was implanted in full-thickness articular cartilage defects in rats. The repair effect of cartilage defects was observed and evaluated among the GEL-SS-PVA, GEL-SS, and control operation groups. The defects were almost completely repaired after 14 weeks in the GEL-SS-PVA group, thereby indicating that the GEL-SS-PVA composite had a favorable effect on articular cartilage defects in rat knee joint repair.

An Overview of Chitosan Nanofibers and their Applications in the Drug Delivery Process

Chitosan is a polycationic natural polymer which is abundant in nature. Chitosan has gained much attention as natural polymer in the biomedical field. The up to date drug delivery as well as the nanotechnology in controlled release of drugs from chitosan nanofibers are focused in this review. Electrospinning is one of the most established and widely used techniques for preparing nanofibers. This method is versatile and efficient for the production of continuous nanofibers. The chitosan-based nanofibers are emerging materials in the arena of biomaterials. Recent studies revealed that various drugs such as antibiotics, chemotherapeutic agents, proteins and anti-inflammatory analgesic drugs were successfully loaded onto electrospun nanofibers. Chitosan nanofibers have several outstanding properties for different significant pharmaceutical applications such as wound dressing, tissue engineering, enzyme immobilization, and drug delivery systems. This review highlights different issues of chitosan nanofibers in drug delivery applications, starting from the preparation of chitosan nanofibers, followed by giving an idea about the biocompatibility and degradation of chitosan nanofibers, then describing how to load the drug into the nanofibers. Finally, the major applications of chitosan nanofibers in drug delivery systems.

Three-Dimensionally Printed Silk-Sericin-Based Hydrogel Scaffold: A Promising Visualized Dressing Material for Real-Time Monitoring of Wounds

A wound dressing which can be convenient for real-time monitoring of wounds is particularly attractive and user-friendly. In this study, a nature-originated silk-sericin-based (SS-based) transparent hydrogel scaffold was prepared and evaluated for the visualization of wound care. The scaffold was fabricated from a hybrid interpenetrating-network (IPN) hydrogel composed of SS and methacrylic-anhydride-modified gelatin (GelMA) by 3D printing. The scaffold transformed into a highly transparent hydrogel upon swelling in PBS, and thus, anything underneath could be easily read. The scaffold had a high degree of swelling and presented a regularly macroporous structure with pores around 400 μm × 400 μm, which can help maintain the moist and apinoid environment for wound healing. Meanwhile, the scaffolds were conducive to adhesion and proliferation of L929 cells. A coculture of HaCaT and HSF cells on the scaffold showed centralized proliferation of the two cells in distributed layers, respectively, denoting a promising comfortable environment for re-epithelialization. Moreover, in vivo studies demonstrated that the scaffold showed no excessive inflammatory reaction. In short, this work presented an SS-based transparent hydrogel scaffold with steerable physical properties and excellent biocompatibility through 3D printing, pioneering promising applications in the visualization of wound care and drug delivery.

Comparative Investigation of Thermal and Structural Behavior in Renewably Sourced Composite Films of Even-Even Nylons (610 and 1010) with Silk Fibroin

As the average life expectancy continues to increase, so does the need for resorbable materials designed to treat, augment, or replace components and functions of the body. Naturally occurring biopolymers such as silks are already attractive candidates due to natural abundance and high biocompatibility accompanied by physical properties which are easily modulated through blending with another polymer. In this paper, the authors report on the fabrication of biocomposite materials made from binary blends of Bombyx mori silk fibroin (SF) protein and renewably sourced low molecular weight nylon 610 and high molecular weight nylon 1010. Films were characterized using scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Results of this study demonstrated that enhanced structural and thermal properties were achievable in composite films SF-N610/N1010 due to their chemical similarity and the possible formation of hydrogen bonds between nylon and silk molecular chains. This study provides useful insight into the sustainable design of functional composite materials for biomedical and green technologies.

Effect of herbal mixture composed of Alchemilla vulgaris and Mimosa on wound healing process

Alchemilla vulgaris and Mimosa tenuiflora (Mimosa) have been used to treat cutaneous wounds as a traditional remedy due to their various biological activities. But, there are only a few studies about the effects of these herbs on wound healing. The purpose of this study is to investigate the wound healing effect of the herbal mixture, consisting of A. vulgaris and Mimosa, in mice and to determine the activity of the extract in vitro. In present study, application of an ointment containing the herbal mixture on the dorsal skin wounds of mice showed that the wound healing process was faster than treatment of Fusidic acid. Histological analysis demonstrated the herbal mixture promoted re-epithelialization, collagen synthesis, and especially the regeneration of skin appendages such as hair follicles. Immunohistochemical analysis revealed the herbal mixture improved angiogenesis and the stabilization of blood vessels, as well as accelerated the formation of granulation tissue. In addition, we demonstrated that herbal mixture enhanced the migration of HaCaT, fibroblasts, and HUVECs on a two-dimensional wound, and promoted the proliferation of macrophages and lymphatic vessels. Our results demonstrated that herbal mixture can promote the migration of keratinocytes, fibroblasts, and endothelial cells, and the proliferation of macrophages and lymphatic vessels. Furthermore, it showed that herbal mixture accelerates wound healing. Therefore, we suggest that herbal mixture may have a potential for therapeutic use for treatment and management of cutaneous wound.

Development of various composition multicomponent chitosan/fish collagen/glycerin 3D porous scaffolds: Effect on morphology, mechanical strength, biostability and cytocompatibility

The various composition multicomponent chitosan/fish collagen/glycerin 3D porous scaffolds were developed and investigated the effect of various composition chitosan/fish collagen/glycerin on scaffolds morphology, mechanical strength, biostability and cytocompatibility. The scaffolds were fabricated via freeze-drying technique. The effects of various compositions consisting in 3D scaffolds were investigated via FT-IR analysis, porosity, swelling and mechanical tests, and effect on the morphology of scaffolds investigated microscopically. The biostability and cytocompatibility tests were used to explore the ability of scaffolds to use for tissue engineering application. The average pore sizes of scaffolds were in range of 100.73±27.62-116.01±52.06, porosity 71.72±3.46-91.17±2.42%, tensile modulus in dry environment 1.47±0.08-0.17±0.03MPa, tensile modulus in wet environment 0.32±0.03-0.14±0.04MPa and biodegradation rate (at day 30) 60.38±0.70-83.48±0.28%. In vitro culture of human fibroblasts and keratinocytes showed that the various composition multicomponent 3D scaffolds were good cytocompatibility however, the scaffolds contained high amount of fish collagen excellently facilitated cell proliferation and adhesion. It was found that the high amount fish collagen and glycerin scaffolds have high porosity, enough mechanical strength and biostability, and excellent cytocompatibility.

Preparation and characterization of gelatin/sericin/carboxymethyl chitosan medical tissue glue

Background:

The development and application of medical glue has been continuously expanding and advancing. However, there are few glues that combine low-cost with excellent biocompatibility.

Methods:

We have prepared a medical tissue glue using a gelatin (Gel), sericin (SS) and carboxymethyl chitosan (CMCS) blend solution, cross-linked with 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC). The combination’s characteristics and microstructure morphology were observed by Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscope (SEM). Bond strength tests were used to measure the bond strength of the glue. To assay blood compatibility, a hemolytic test, dynamic coagulation test and platelet adherence test were also investigated. Further, the cellular behavior of L-929 and a systemic acute toxicity test on the Gel/SS/CMCS tissue glue were also investigated by MTT and H&E staining.

Results:

Characterization analysis showed that there was stable binding between raw materials, forming an amide bond with homogeneous holes. The bond strength of the tissue glue reached 2.50 ± 0.04 N in 10 minutes, slightly higher than the alpha-cyanoacrylate biological glue (2.25 ± 0.05 N). Blood compatibility tests revealed that the glue had outstanding blood compatibility. Further, cytotoxicity test and systemic acute toxicity test both showed that the glue was without cytotoxicity and not toxic to the body.

Conclusions:

The Gel/SS/CMCS tissue glue we prepared at low cost had excellent biocompatibility and structural characteristics. It could be a better candidate for tissue engineering in biomedical applications applied in clinical practice to promote skin wound healing and to further reduce the formation of skin wound scars.

Structure-property relationships of Thai silk-microcrystalline cellulose biocomposite materials fabricated from ionic liquid

Biomaterials made from natural proteins and polysaccharides have become increasingly popular in the biomedical field due to their good biocompatibility and tunable biodegradability. However, the low miscibility of polysaccharides with proteins presents challenges in the creation of protein-polysaccharide composite materials. In this study, neat 1-allyl-3-methylimidazolium chloride (AMIMCl) ionic liquid was used to regenerate Thailand gold Bombyx mori silk and microcrystalline cellulose blended films. This solvent was found to not only effectively dissolve both natural polymers, but also preserve the structure and integrity of the polymers. A single glass transition temperature for each blend was found in DSC curves, indicating good miscibility between the Thai silk and cellulose molecules. The structural composition as well as the morphology and thermal stability of blend films were then determined using FTIR, SEM and TGA. It was found that by varying the ratio of Thai silk to cellulose, the thermal and physical properties of the material could be tuned. Blended films tended to be more thermally stable which could be due to the presence of hydrophobic-hydrophobic or electrostatic interactions between the silk and cellulose. These studies offered a new pathway to understand the tunable properties of protein-polysaccharide composite biomaterials with controllable physical and biological properties.

A study of long-term stability and antimicrobial activity of chlorhexidine, polyhexamethylene biguanide, and silver nanoparticle incorporated in sericin-based wound dressing

In this study, three kinds of antiseptics which were 0.05% chlorhexidine, 0.2% polyhexamethylene biguanide (PHMB), or 200 ppm silver nanoparticle was introduced to incorporate in the sericin-based scaffold to produce the antimicrobial dressing for the treatment of infected chronic wound. The effects of antiseptic incorporation on the stability, release of sericin, and short-term and long-term (6 months) antimicrobial activity of the sericin dressing against gram-negative and gram-positive bacteria were investigated. We showed that the incorporation of each antiseptic did not have significant effect on the internal morphology (pore size ~ 73-105 μm), elasticity (Young's modulus ~ 200-500 kPa), and the sericin release behavior of the sericin-based dressing. The release of sericin from the dressing was prolonged over 120 h and thereafter. Comparing among three antiseptics, 0.05% chlorhexidine incorporated in the sericin dressing showed the highest immediate and long-term (6 months) antimicrobial effect (largest inhibition zone) against most bacteria either gram-positive or gram-negative bacteria. The in vivo safety test following ISO10993 standard (Biological evaluation of medical devices - Part 6: Tests for local effects after implantation) confirmed that the sericin dressing incorporating 0.05% chlorhexidine did not irritate to tissue, comparing with the commercial material used generally in clinic (Allevyn®, Smith & Nephew). We suggested the sericin dressing incorporating 0.05% chlorhexidine for the treatment of infected chronic wound. Chlorhexidine would reduce the risk of infection while the sericin may promote wound healing.

In vivo safety and efficacy of sericin/poly(vinyl alcohol)/glycerin scaffolds fabricated by freeze-drying and salt-leaching techniques for wound dressing applications

In our previous works, two techniques (freeze-drying and salt-leaching) were introduced to fabricate the sericin/poly(vinyl alcohol)/glycerin scaffolds. The freeze-dried and salt-leached sericin/poly(vinyl alcohol)/glycerin scaffolds with the same composition showed distinguished physical and in vitro biological characteristics. In this study, the in vivo safety and efficacy tests of both scaffolds as dressing materials for the healing of full-thickness wounds in rat model were performed in comparison with the clinically used dressing, Allevyn®. In the safety test, the scaffolds were implanted subcutaneously, and the signs of tissue irritation including the extent of inflammatory cells, calcification, vascularization, and fatty infiltration were scored. In the efficacy test, the scaffolds were applied to the full-thickness wound (1.5 cm × 1.5 cm), and the epithelialization and collagen formation in the wound were evaluated. Both freeze-dried and salt-leached scaffolds were characterized as non- to slightly irritant implantable materials. The freeze-dried scaffold minimally causes irritation to the tissue possibly because it was derived from the non-chemical relevant process. Furthermore, the freeze-dried scaffold showed the highest wound healing efficiency as characterized by the fastest epithelialization and highest extent of collagen formation. This might be due to the more sustained release of sericin from the freeze-dried scaffold, compared to that of the salt-leached scaffold. Therefore, fabrication process seemed to directly regulate the properties and applicability of the scaffolds. The safety and efficacy of the dressing materials in wound healing application depended not only on the materials themselves but also on the fabrication process that produces them.

Superior physicochemical and biological properties of poly(vinyl alcohol)/sericin hydrogels fabricated by a non-toxic gamma-irradiation technique

Gamma irradiation was used to fabricate crosslinked poly(vinyl alcohol)/sericin hydrogels with different sericin concentrations, and the physicochemical and biological properties of the gamma-irradiated poly(vinyl alcohol)/sericin hydrogels were characterized. Following gamma irradiation, the hydrogels had a high gel fraction (80%–95%), implying a high degree of crosslinking. Fourier transform infrared spectra confirmed the crosslinking bonds within the hydrogels, as seen by the characteristic shift in the peak. Furthermore, a low tensile modulus together with a high elongation percentage indicated that the hydrogels were easy to handle. We also showed that all hydrogels released sericin simultaneously. The poly(vinyl alcohol)/sericin hydrogels with high sericin content released more sericin, possibly due to less crosslinking of the hydrogels. When L929 cells were cultured with the hydrogel extracts, the cells were viable and could proliferate, particularly for the cells cultured with the hydrogels containing a high sericin content, which released more sericin. Migration assays also demonstrated that the cells migrated toward the medium extract of hydrogels containing high sericin. We suggest that sterile gamma-irradiated poly(vinyl alcohol)/sericin hydrogels could be used as a wound dressing for the treatment of dry and low-exudate wounds.

Controlled Release of Chitosan and Sericin from the Microspheres-Embedded Wound Dressing for the Prolonged Anti-microbial and Wound Healing Efficacy

One approach in wound dressing development is to incorporate active molecules or drugs in the dressing. In order to reduce the frequency of dressing changes as well as to prolong wound healing efficacy, wound dressings that can sustain the release of the active molecules should be developed. In our previous work, we developed chitosan/sericin (CH/SS) microspheres that released sericin in a controlled rate. However, the difficulty of applying the microspheres that easily diffuse and quickly degrade onto the wound was its limitations. In this study, we aimed to develop wound dressing materials which are easier to apply and to provide extended release of sericin. Different amounts of CH/SS microspheres were embedded into various compositions of polyvinyl alcohol/gelatin (PVA/G) scaffolds and fabricated using freeze-drying and glutaraldehyde crosslinking techniques. The obtained CH/SS microspheres-embedded scaffolds with appropriate design and formulation were introduced as a wound dressing material. Sericin was released from the microspheres and the scaffolds in a sustained manner. Furthermore, an optimized formation of the microspheres-embedded scaffolds (2PVA2G+2CHSS) was shown to possess an effective antimicrobial activity against both gram-positive and gram-negative bacteria. These microspheres-embedded scaffolds were not toxic to L929 mouse fibroblast cells, and they did not irritate the tissue when applied to the wound. Finally, probably by the sustained release of sericin, these microspheres-embedded scaffolds could promote wound healing as well as or slightly better than a clinically used wound dressing (Allevyn®) in a mouse model. The antimicrobial CH/SS microspheres-embedded PVA/G scaffolds with sustained release of sericin would appear to be a promising candidate for wound dressing application.