Management of failed total ankle replacement with a retrograde short femoral nail: a case report

Retrograde intramedullary nail entry point for tibio-talo-calcaneal arthrodesis: a review of anatomical studies

PURPOSE

Tibio-talo-calcaneal arthrodesis (TTCA) is considered a safe and valuable option for end-stage tibiotalar and subtalar arthritis, and usually is performed with a retrograde intramedullary nail. Although the good results reported, potential complications may be related to retrograde nail entry point. Aim of this systematic review is to analyze in cadaveric studies the risk of iatrogenic injuries related to different entry points and different retrograde intramedullary nail design when performing TTCA.

METHODS

According to PRISMA, a systematic review of the literature was performed on PubMed, EMBASE and SCOPUS databases. A subgroup analysis comparing different entry point location (anatomical or fluoroscopic guided) and different nail design (straight vs. valgus curved nails) was performed.

RESULTS

Five studies were included, for a total of 40 specimens. Superiority of anatomical landmark-guided entry points was observed. Different nail designs did not seem to influence nor iatrogenic injuries neither hindfoot alignment.

CONCLUSION

Retrograde intramedullary nail entry point should be placed in the lateral half of the hindfoot in order to minimize the risk of iatrogenic injuries.

Isolation and characterisation of wear debris surrounding failed total ankle replacements

Aseptic loosening and osteolysis continue to be a short- to mid-term problem for total ankle replacement (TAR) devices. The production of wear particles may contribute to poor performance, but their characteristics are not well understood. This study aimed to determine the chemical composition, size and morphology of wear particles surrounding failed TARs. A recently developed wear particle isolation method capable of isolating both high- and low-density materials was applied to 20 retrieved periprosthetic tissue samples from 15 failed TARs of three different brands. Isolated particles were imaged using ultra-high-resolution imaging and characterised manually to determine their chemical composition, size, and morphology. Six different materials were identified, which included: UHMWPE, calcium phosphate (CaP), cobalt chromium alloy (CoCr), commercially pure titanium, titanium alloy and stainless steel. Eighteen of the 20 samples contained three or more different wear particle material types. In addition to sub-micron UHMWPE particles, which were present in all samples, elongated micron-sized shards of CaP and flakes of CoCr were commonly isolated from tissues surrounding AES TARs. The mixed particles identified in this study demonstrate the existence of a complex periprosthetic environment surrounding TAR devices. The presence of such particles suggests that early failure of devices may be due in part to the multifaceted biological cascade that ensues after particle release. This study could be used to support the validation of clinically-relevant wear simulator testing, pre-clinical assessment of fixation wear and biological response studies to improve the performance of next generation ankle replacement devices. STATEMENT OF SIGNIFICANCE: Total ankle replacement devices do not perform as well as total hip and knee replacements, which is in part due to the relatively poor scientific understanding of how they fail. The excessive production of certain types of wear debris is known to contribute to joint replacement failure. This is the first study to successfully isolate and characterise high- and low-density wear particles from tissues collected from patients with a failed total ankle replacement. This article includes the chemical composition and characteristics of the wear debris generated by ankle devices, all of which may affect their performance. This research provides clinically relevant reference values and images to support the development of pre-clinical testing for future total ankle replacement designs.

The King's Sliding Hindfoot Osteotomy for the Treatment of Talus Body Defects-Results of a New Technique in Tibiotalocalcaneal Arthrodesis

Bone loss after avascular necrosis of the talus secondary to acute traumatic or chronic pathologies often requires surgical reconstruction. This study reports the early results of a sliding oblique hindfoot osteotomy for salvage procedures combined with tibiotalar arthrodesis to achieve a well-aligned, painless, plantigrade foot. All patients presenting to our institution with severe talus body defects requiring corrective surgery between January 2016 and August 2020 were included. An oblique osteotomy of the diseased talus was performed to correct anterior talus subluxation and prevent excessive loss of height at the tibiotalar apposition and to correct varus-valgus deformity. A retrograde hindfoot nail was used for intramedullary tibiotalocalcaneal arthrodesis. Patients were prospectively followed. Primary outcomes included assessment of mobility and union at 6 months. Secondary outcomes included 30-day postoperative complications, patient satisfaction and change in American Orthopaedic Foot & Ankle Society (AOFAS) score at 1-year postoperation. Nine patients underwent this procedure with a mean follow-up of 18 months (4-36 months). Average age was 66 (58-81) years. Mean body mass index was 33.7 (22-38) kg/m². All patients went on to fusion and were ambulating at 6 months (n = 8). At 1 year, the mean improvement in AOFAS was 28.9 points (p < .05) (n = 7) and all patients were satisfied with the outcome of their treatment. This technique represents an alternative to conventional hindfoot salvage techniques showing predictable outcomes in complex hindfoot deformity with talar body collapse and anterior subluxation. Further quantitative studies are needed to define if this technique minimizes limb shortening/limb-length discrepancies when compared to traditional horizontal cuts.

Ankle Arthrodesis With Structural Grafts Can Work for the Salvage of Failed Total Ankle Arthroplasty

Background. Treatment options after failed total ankle arthroplasty (TAA) are limited. This study reports midterm outcomes and radiographic results in a single-surgeon group of patients who have undergone ankle arthrodesis with intramedullary nail fixation and structural allograft augmentation following failed TAA. Methods. A retrospective review on patients who underwent failed TAA revision with structural femoral head allograft and intramedullary tibiotalocalcaneal (TTC) nail fixation was completed. Foot Function Index (FFI), American Orthopaedic Foot & Ankle Society (AOFAS) outcome scores, and radiographs were obtained at each visit with 5-year follow-up. Results. Five patients were followed to an average of 5.2 years (range 4.7-5.6). Enrollment FFI was 34.82 (range 8.82-75.88); at midterm follow-up it was 20.42 (range 0-35.38). Enrollment AOFAS scores averaged 66.6 (range 61-77); at midterm follow-up it was 70.33 (range 54-88). Radiographs showed union in 4 of 5 patients at enrollment and 2 of 3 patients at midterm. Conclusions. Utilization of TTC fusion with femoral head allograft is a salvage technique that can produce a functional limb salvage. Our results show continued improvement in patient-reported outcomes, with preservation of limb length and reasonable union rate. Levels of Evidence: Therapeutic, Level II: Prospective, comparative trial.

Evaluation of Midterm Results of the Panta Nail: An Active Compression Tibiotalocalcaneal Arthrodesis Device

A tibiotalocalcaneal intramedullary rod is a powerful construct often reserved for difficult and salvage cases. The Panta Nail (Integra LifeSciences, Plainsboro, NJ) is a second-generation rod that offers active axial compression compared with previous rod designs. We characterized our experience with this device and identified factors associated with nonunion. We retrospectively identified 19 patients receiving the Panta Nail during a 4-year period with a mean follow-up period of 16 months. We used a consecutive series approach toward inclusion. Fusion, asymptomatic fibrous union, or nonunion was determined for each ankle and subtalar joint as the primary endpoint. Patients were grouped as follows: group A, successful outcome; group B, successful outcome after dynamization; group C, no successful outcome. Secondary data were tested for association with the probability of first-attempt fusion. The Panta Nail resulted in a first-attempt fusion rate of 65% at the ankle and subtalar joints. With implementation of dynamization (31% of cases) at an average of 28 weeks after insertion (groups A and B), the bony fusion rate was 88% and 77% at the ankle and subtalar joint, respectively. Inclusion of 3 asymptomatic fibrous unions with final visual analog scale scores <4 (1 ankle; 2 subtalar) as successful outcomes resulted in 94% and 88% success rates for the ankle and subtalar joints (groups A and B). Salvaged total ankle arthroplasties with the Panta Nail device as a subgroup had an 83% fusion rate, with a 50% dynamization rate. No predictors of nonunion were found. The Panta Nail is a second-generation tibiotalocalcaneal arthrodesis device capable of providing good success rates for fusion. Also, dynamization is an appropriate and frequent augmentation method.

Salvage of avascular necrosis of the talus by combined ankle and hindfoot arthrodesis without structural bone graft

BACKGROUND

Osteonecrosis of the talus is a well-recognized pathology, which can result in significant hindfoot collapse resulting in poor function and pain. Treatment with intramedullary tibiotalocalcaneal arthrodesis (IMTCA) using a retrograde intramedullary nail is widely utilized for severe concomitant tibiotalar and subtalar pathologies. This study reports the results of ankle and hindfoot arthrodesis in patients with arthritis and deformity caused specifically by talar osteonecrosis.

METHODS

Fourteen ankle and hindfoot arthrodeses with retrograde intramedullary nail were studied, with a mean follow-up of 26 months. Medical records were reviewed for operative technique, concomitant procedures, bone graft used, and postoperative complications including nonunion, infection, nerve injury, wound healing issues, and the need for additional surgeries. Clinical outcomes included Visual Analogue Scale for pain, the AOFAS Ankle/Hindfoot Score, and the SF-36 questionnaire.

RESULTS

Over 80% of cases had osteonecrosis involving the entire body of the talus. In 4 cases tibiocalcaneal arthrodesis was performed, with the remaining talar head-neck portion fused to anterior aspect of tibia. Union was achieved in all cases. The mean preoperative VAS score was 6.9 (range 5 to 9, SD ± 1.5) decreasing to 1.7 (range 0 to 6, SD ± 2.2) postoperatively (P = .00008). The mean preoperative AOFAS score was 32.7 (range 20 to 46, SD ± 8.7), increasing to 72.1 (range 46 to 86, SD ± 10.1, P = .00003). The mean preoperative SF-36 physical component score was 30.5 (range 21 to 42, SD ± 6.9) increasing to 42.8 (range 20 to 60, SD ± 11.4) postoperatively (P = .02). Complications included 1 stress fracture, 4 hardware removals, and 1 superficial infection.

CONCLUSION

Ankle and hindfoot arthrosis due to extensive talar AVN can be successfully treated with IMTCA.

Improvement in gait following combined ankle and subtalar arthrodesis

BACKGROUND

This study assessed the hypothesis that arthrodesis of both the ankle and the hindfoot joints produces an objective improvement of function as measured by gait analysis of patients with severe ankle and hindfoot arthritis.

METHODS

Twenty-one patients with severe ankle and hindfoot arthritis who underwent unilateral tibiotalocalcaneal arthrodesis with an intramedullary nail were prospectively studied with three-dimensional (3D) gait analysis at a minimum of one year postoperatively. The mean age at the time of the operation was fifty-nine years, and the mean duration of follow-up was seventeen months (range, twelve to thirty-one months). Temporospatial measurements included cadence, step length, walking velocity, and total support time. The kinematic parameters were sagittal plane motion of the ankle, knee, and hip. The kinetic parameters were sagittal plane ankle power and moment and hip power. Symmetry of gait was analyzed by comparing the step lengths on the affected and unaffected sides.

RESULTS

There was significant improvement in multiple parameters of postoperative gait as compared with the patients' own preoperative function. Temporospatial data showed significant increases in cadence (p = 0.03) and walking speed (p = 0.001) and decreased total support time (p = 0.02). Kinematic results showed that sagittal plane ankle motion had decreased, from 13.2° preoperatively to 10.2° postoperatively, in the operatively treated limb (p = 0.02), and increased from 22.2° to 24.1° (p = 0.01) in the contralateral limb. Hip motion on the affected side increased from 39° to 43° (p = 0.007), and knee motion increased from 56° to 60° (p = 0.054). Kinetic results showed significant increases in ankle moment (p < 0.0001) of the operatively treated limb, ankle power of the contralateral limb (p = 0.009), and hip power on the affected side (p = 0.005) postoperatively. There was a significant improvement in gait symmetry (p = 0.01).

CONCLUSIONS

There was a small loss of sagittal plane motion in the affected limb postoperatively. There were marked increases in gait velocity, ankle moment, and hip motion and power, documenting objective improvements in ambulatory function. The data showed that preoperative ankle motion was greatly diminished. This may suggest that pain is more important than stiffness in asymmetric gait.

Surgical correction of severe deformity of the ankle and hindfoot by arthrodesis using a compressing retrograde intramedullary nail

BACKGROUND

Tibiotalocalcaneal arthrodesis with a retrograde intramedullary nail is a widely used surgical technique for the treatment of concomitant tibiotalar and subtalar arthritis and correction of accompanying deformity. This study was undertaken to evaluate the union rate, deformity correction, and clinical outcomes achieved using a compressing retrograde intramedullary nail.

METHODS

Thirty tibiotalocalcaneal arthrodeses with an osseous compressing arthrodesis nail system were studied with a mean follow-up of 26 months. Radiographic data were collected on deformity correction and union rate, and clinical outcomes were evaluated using the Visual Analogue Scale (VAS) for pain, the American Orthopaedic Foot & Ankle Society (AOFAS) Ankle/Hindfoot Score, and the Short Form-36 (SF-36) health survey. Records were reviewed for complications and concomitant procedures.

RESULTS

Thirteen of 30 operated limbs had a preoperative coronal plane deformity exceeding 15 degrees. Mean magnitude of correction was 13.2 degrees (range, 0-32 degrees, standard deviation ±9.6). In total, 76% of limbs (23/30) had postoperative coronal deformity of less than 5 degrees. Union was achieved in 96.6% of patients. There were 3 cases of tibial stress reaction, 3 cases of transient plantar nerve irritation, and 3 cases of wound infection. Clinical outcomes demonstrated a reduction in mean VAS score from 6.5 to 1.3 (P < .01), an increase in mean AOFAS Ankle/Hindfoot Scores from 29.7 to 74.3 (P < .01), and an increase in mean total SF-36 scores from 85.6 to 98.8 (P < .01).

CONCLUSION

A compressing retrograde intramedullary nail was effective in achieving deformity correction, a high union rate, and improvement in clinical outcomes.

LEVEL OF EVIDENCE

Level IV, retrospective case series.

Fusion following failed total ankle replacement

Although mid- to long-term results after total ankle replacement have improved because of available second- and third-generation devices, failure of total ankle replacement is still more common compared with total hip replacement and total knee replacement. The portfolio of available total ankle replacement revision component options is small. Furthermore, the bone stock of the tibiotalar region is scarce making it difficult and in some situations impossible to perform revision total ankle replacement. In these cases tibiotalar and tibiotalocalcaneal fusions are valuable options. This article describes which surgical procedures should be performed depending on the initial situation and gives detailed advice on surgical technique, postoperative care, and clinical results.

Circular external fixator-assisted ankle arthrodesis following failed total ankle arthroplasty

BACKGROUND

Failed total ankle arthroplasty (TAA) often results in significant bone loss and requires salvage arthrodesis. This study quantified the bone loss following failed TAA and reports the outcome of seven arthrodesis reconstructions using the Ilizarov method.

METHODS

A retrospective review of ankle fusions was performed for failed TAA to collect the mode of implant failure, presenting limb length discrepancy (LLD), total bone defect, postarthrodesis LLD, and treatment type (shoe lift versus distraction osteogenesis) and amount (shoe lift or lengthening).

RESULTS

Four mechanical failures and three infections were found. Four of seven cases had prior revision TAAs. Four of seven patients were treated with tibiotalar arthrodesis; three of the seven patients required talar resection and tibiocalcaneal arthrodesis. The mean presenting LLD was 2.2 (range, 1.2 to 3.5) cm. The mean time in frame was 197 (range, 146 to 229) days. With a mean postexplantation total bone defect of 5.1 (range, 3.7 to 8.5) cm, four of seven patients elected tibial lengthening following fusion [mean lengthening 4.6 (range, 2.5 to 8.0) cm; external fixation index (EFI) 42.6 (range, 16.5 to 55.6) days/cm)]. Three of seven patients were treated with a shoe lift [mean lift height 2.9 (range 2.5 to 3.2) cm]. There was no failure of fixation, refracture, or infection. All patients had a stable plantigrade foot and walked with minimal limp. Association for the Study and Application of the Method of Ilizarov (ASAMI) functional scores were six good and one fair. ASAMI bone scores were four excellent and three good.

CONCLUSIONS

Ankle arthrodesis following failed TAA results in large LLDs secondary to bone loss during implant failure and subsequent explantation. External fixation can produce an excellent fusion rate in complex, possibly infected, failed TAAs. Limb length equalization (by either distraction osteogenesis or shoe lift) provides a means of obtaining good functional outcomes following failed TAA.

Salvage of failed total ankle arthroplasty with fusion using structural allograft and internal fixation

BACKGROUND

The current study presents our experience with conversion of failed TAA to fusion.

MATERIALS AND METHODS

A retrospective review of all failed total ankles converted to fusion from 1999 to 2009 was performed at our institution.

RESULTS

Twelve total ankles were converted to isolated ankle fusions (Group I) and 12 converted to ankle-hindfoot fusions (Group II). All isolated ankle fusions were stabilized with anterior plate and screws with one nonunion. Structural bone graft was used in ten of 12. Mean outcome scores using the AOFAS-Ankle/Hindfoot score and Maryland Foot Score improved from preoperative values of 43 ± 13 and 56.7 ± 14 to 67 ± 12 and 71.2 ± 16 postoperatively, respectively (p < 0.05). All Group II ankle-hindfoot fusion patients were fixed using either anterior plate and screws, intramedullary nail, or a combination nail:plate construct. All received structural allografts. Five patients developed nonunion including four subtalar nonunions Preoperative scores on the AOFAS-AHS and MFS were 48.8 ± 14 and 58.3 ± 14. Postoperative scores were 51.2 ± 17 for the AOFAS and 64.5 ± 14 for the MFS. These changes were not statistically significant. However, the difference in nonunions was significant, p < 0.05.

CONCLUSION

Failed total ankles can be successfully converted to fusion using structural bone graft and internal fixation. The primary risk appears to be nonunion of the subtalar joint when ankle-hindfoot fusion is required. We believe this risk can be decreased by using a separate approach for preparation of the subtalar joint.

Ankle arthrodesis: the simple and the complex

Ankle arthrodesis is by no means a simple surgery. It requires preoperative planning, meticulous preparation of bony surfaces, cognizance of ankle positioning, and rigidity of fixation. The procedure also requires enough experience on the part of the operating surgeon to recognize important patient factors and to determine which type of ankle arthrodesis is most appropriate for that specific patient.

A technique of fusion for failed total replacement of the ankle

Salvage of a failed total ankle replacement is technically challenging and although a revision procedure may be desirable, a large amount of bone loss or infection may preclude this. Arthrodesis can be difficult to achieve and is usually associated with considerable shortening of the limb.

We describe a technique for restoring talar height using an allograft from the femoral head compressed by an intramedullary nail. Three patients with aseptic loosening were treated successfully by this method with excellent symptomatic relief at a mean follow-up of 32 months (13 to 50).

The management of failed ankle replacement

Advances in the design of the components for total ankle replacement have led to a resurgence of interest in this procedure.

Between January 1999 and December 2004, 16 patients with a failed total ankle replacement were referred to our unit. In the presence of infection, a two-stage salvage procedure was planned. The first involved the removal of the components and the insertion of a cement spacer. Definitive treatment options included hindfoot fusion with a circular frame or amputation. When there was no infection, a one-stage salvage procedure was planned. Options included hindfoot fusion with an intramedullary nail or revision total ankle replacement. When there was suspicion of infection, a percutaneous biopsy was performed. The patients were followed up for a minimum of 12 months.

Of the 16 patients, 14 had aseptic loosening, five of whom underwent a revision total ankle replacement and nine a hindfoot fusion. Of the two with infection, one underwent fusion and the other a below-knee amputation. There were no cases of wound breakdown, nonunion or malunion.

Management of the failed total ankle replacement should be performed by experienced surgeons and ideally in units where multidisciplinary support is available. Currently, a hindfoot fusion appears to be preferable to a revision total ankle replacement.