Effect of growth factors on cell proliferation, matrix deposition, and morphology of human nasal septal chondrocytes cultured in monolayer

The Effect of the Overexpression or Addition of IGF1 and FGF2 in Human Chondrocytes Included in a Fibrin Matrix and Cultivated in a Dynamic Environment

Hyaline cartilage is a highly specialized tissue. When injured, its repair capacity is low, which results in the massive destruction of the articular surface. Using tissue engineering and genetic engineering techniques, it is possible to provide a suitable microenvironment providing chondrocyte growth factors involved in the development of hyaline cartilage proteins, as well as cell proliferation and differentiation. Our aim was to stimulate the synthesis of an extracellular matrix via the chondrocytes included in a fibrin matrix through the addition or overexpression of IGF1 and/or FGF2, while maintaining a constant agitation of the culture medium. Collagen type II and glycosaminoglycans increased during the entire incubation time. In contrast, collagen type I decreased its expression under the same culture conditions, transfecting or supplementing growth factors to chondrocytes. However, chondrocytes that were not transfected or supplemented showed a general increase in the proteins analyzed in this study. The presence of IGF1 and FGF2 increased the protein synthesis of the hyaline cartilage, regardless of which one was the source of growth factors. Continuous agitation using the spinner flask allows for the adequate nutrition of chondrocytes included in the fibrin matrix. However, they require growth factors to up-regulate or down-regulate collagenous proteins.

Cartilage 3D bioprinting for rhinoplasty using adipose-derived stem cells as seed cells: Review and recent advances

Nasal deformities due to various causes affect the aesthetics and use of the nose, in which case rhinoplasty is necessary. However, the lack of cartilage for grafting has been a major problem and tissue engineering seems to be a promising solution. 3D bioprinting has become one of the most advanced tissue engineering methods. To construct ideal cartilage, bio-ink, seed cells, growth factors and other methods to promote chondrogenesis should be considered and weighed carefully. With continuous progress in the field, bio-ink choices are becoming increasingly abundant, from a single hydrogel to a combination of hydrogels with various characteristics, and more 3D bioprinting methods are also emerging. Adipose-derived stem cells (ADSCs) have become one of the most popular seed cells in cartilage 3D bioprinting, owing to their abundance, excellent proliferative potential, minimal morbidity during harvest and lack of ethical considerations limitations. In addition, the co-culture of ADSCs and chondrocytes is commonly used to achieve better chondrogenesis. To promote chondrogenic differentiation of ADSCs and construct ideal highly bionic tissue-engineered cartilage, researchers have used a variety of methods, including adding appropriate growth factors, applying biomechanical stimuli and reducing oxygen tension. According to the process and sequence of cartilage 3D bioprinting, this review summarizes and discusses the selection of hydrogel and seed cells (centered on ADSCs), the design of printing, and methods for inducing the chondrogenesis of ADSCs.

Progress of 3D Printing Techniques for Nasal Cartilage Regeneration

Once cartilage is damaged, its self-repair capacity is very limited. The strategy of tissue engineering has brought a new idea for repairing cartilage defect and cartilage regeneration. In particular, nasal cartilage regeneration is a challenge because of the steady increase in nasal reconstruction after oncologic resection, trauma, or rhinoplasty. From this perspective, three-dimensional (3D) printing has emerged as a promising technology to address the complexity of nasal cartilage regeneration, using patient's image data and computer-aided deposition of cells and biomaterials to precisely fabricate complex, personalized tissue-engineered constructs. In this review, we summarized the major progress of three prevalent 3D printing approaches, including inkjet-based printing, extrusion-based printing and laser-assisted printing. Examples are highlighted to illustrate 3D printing for nasal cartilage regeneration, with special focus on the selection of seeded cell, scaffolds and growth factors. The purpose of this paper is to systematically review recent research about the challenges and progress and look forward to the future of 3D printing techniques for nasal cartilage regeneration.Level of Evidence III This journal requires that authors assign a level of evidence to each submission to which Evidence-Based Medicine rankings are applicable. This excludes Review Articles, Book Reviews, and manuscripts that concern Basic Science, Animal Studies, Cadaver Studies, and Experimental Studies. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors https://www.springer.com/00266 .

Biosafety evaluation of culture-expanded human chondrocytes with growth factor cocktail: a preclinical study

The scarcity of chondrocytes is a major challenge for cartilage tissue engineering. Monolayer expansion is necessary to amplify the limited number of chondrocytes needed for clinical application. Growth factors are often added to improve monolayer culture conditions, promoting proliferation, and enhancing chondrogenesis. Limited knowledge on the biosafety of the cell products manipulated with growth factors in culture has driven this study to evaluate the impact of growth factor cocktail supplements in chondrocyte culture medium on chondrocyte genetic stability and tumorigenicity. The growth factors were basic fibroblast growth factor (b-FGF), transforming growth factor β2 (TGF β2), insulin-like growth factor 1 (IGF-1), insulin-transferrin-selenium (ITS), and platelet-derived growth factor (PD-GF). Nasal septal chondrocytes cultured in growth factor cocktail exhibited a significantly high proliferative capacity. Comet assay revealed no significant DNA damage. Flow cytometry showed chondrocytes were mostly at G0-G1 phase, exhibiting normal cell cycle profile with no aneuploidy. We observed a decreased tumour suppressor genes’ expression (p53, p21, pRB) and no TP53 mutations or tumour formation after 6 months of implantation in nude mice. Our data suggest growth factor cocktail has a low risk of inducing genotoxic and tumorigenic effects on chondrocytes up to passage 6 with 16.6 population doublings. This preclinical tumorigenicity and genetic instability evaluation is crucial for further clinical works.

Will Tissue-Engineering Strategies Bring New Hope for the Reconstruction of Nasal Septal Cartilage?

The nasal septal cartilage plays an important role in the growth of midface and as a vertical strut preventing the collapse of the nasal bones. The repair of nasal cartilage defects remains a major challenge in reconstructive surgery. The tissue engineering strategy in the development of tissue has opened a new perspective to generate functional tissue for transplantation. Given the poor regenerative properties of cartilage and a limited amount of autologous cartilage availability, intense interest has evoked for tissue engineering approaches for cartilage development to provide better outcomes for patients who require nasal septal reconstruction. Despite numerous attempts to substitute the shapely hyaline cartilage in the nasal cartilages, many significant challenges remained unanswered. The aim of this research was to carry out a critical review of the literature on research work carried out on the development of septal cartilage using a tissue engineering approach, concerning different cell sources, scaffolds and growth factors, as well as its clinical pathway and trials have already been carried out.

Effects of Sprifermin, IGF1, IGF2, BMP7, or CNP on Bovine Chondrocytes in Monolayer and 3D Culture

One possible approach to treat osteoarthritis (OA) is to counteract cartilage degeneration with anabolic compounds that stimulate chondrocyte proliferation and/or extracellular matrix (ECM) production. Several molecules including sprifermin (recombinant human fibroblast growth factor [FGF18]), insulin-like growth factor-1 [IGF1] and -2 [IGF2], C-type natriuretic peptide [CNP], and bone metamorphic protein 7 [BMP7] have been shown to have these characteristics both in vitro and in vivo. However, it is not known how these molecules compare each other regarding their effect on phenotype and stimulation of ECM production in primary chondrocytes. The effects of sprifermin, IGF1, IGF2, CNP, and BMP7 were evaluated on bovine articular chondrocytes, first in monolayer to determine their effective concentrations, and then in three-dimensional (3D) culture at concentrations of 100 ng/ml for sprifermin; 300 ng/ml for IGF1, IGF2, and BMP7; and 10 nM for CNP. In 3D culture, the effects of a permanent exposure or a cyclic exposure consisting of 24 h incubation per week with the compounds were evaluated. All growth factors increased ECM production and cell proliferation to a similar extent but CNP had almost no effect on bovine chondrocytes. Sprifermin was more effective with cyclic exposure, IGF1, and IGF2 with permanent exposure, and BMP7 showed similar results with both exposures. Regarding the cell phenotype, sprifermin appeared to be the only compound favoring the chondrocyte phenotype; it decreased type I collagen expression and had no hypertrophic effect. Together, these results confirmed that sprifermin is a promising disease-modifying OA drug. © 2019 The Authors. Journal of Orthopaedic Research^® published by Wiley Periodicals, Inc. on behalf of Orthopaedic Research Society. J Orthop Res 38:653-662, 2020.

In vitro extracellular matrix accumulation of nasal and articular chondrocytes for intervertebral disc repair

Chondrocyte based regenerative therapies for intervertebral disc repair such as Autologous Disc Cell Transplantation (ADCT, CODON) and allogeneic juvenile chondrocyte implantation (NuQu^®, ISTO Technologies) have demonstrated good outcomes in clinical trials. However concerns remain with the supply demand reconciliation and issues surrounding immunoreactivity which exist for allogeneic-type technologies. The use of stem cells is challenging due to high growth factor requirements, regulatory barriers and differentiation towards a stable phenotype. Therefore, there is a need to identify alternative non-disc cell sources for the development and clinical translation of next generation therapies for IVD regeneration. In this study, we compared Nasal Chondrocytes (NC) as a non-disc alternative chondrocyte source with Articular Chondrocytes (AC) in terms of cell yield, morphology, proliferation kinetics and ability to produce key extracellular matrix components under 5% and 20% oxygen conditions, with and without exogenous TGF-β supplementation. Results indicated that NC maintained proliferative capacity with high amounts of sGAG and lower collagen accumulation in the absence of TGF-β supplementation under 5% oxygen conditions. Importantly, osteogenesis and calcification was inhibited for NC when cultured in IVD-like microenvironmental conditions. The present study provides a rationale for the exploration of nasal chondrocytes as a promising, potent and clinically feasible autologous cell source for putative IVD repair strategies.

Rapid Chondrocyte Isolation for Tissue Engineering Applications: The Effect of Enzyme Concentration and Temporal Exposure on the Matrix Forming Capacity of Nasal Derived Chondrocytes

Laboratory based processing and expansion to yield adequate cell numbers had been the standard in Autologous Disc Chondrocyte Transplantation (ADCT), Allogeneic Juvenile Chondrocyte Implantation (NuQu®), and Matrix-Induced Autologous Chondrocyte Implantation (MACI). Optimizing cell isolation is a key challenge in terms of obtaining adequate cell numbers while maintaining a vibrant cell population capable of subsequent proliferation and matrix elaboration. However, typical cell yields from a cartilage digest are highly variable between donors and based on user competency. The overall objective of this study was to optimize chondrocyte isolation from cartilaginous nasal tissue through modulation of enzyme concentration exposure (750 and 3000 U/ml) and incubation time (1 and 12 h), combined with physical agitation cycles, and to assess subsequent cell viability and matrix forming capacity. Overall, increasing enzyme exposure time was found to be more detrimental than collagenase concentration for subsequent viability, proliferation, and matrix forming capacity (sGAG and collagen) of these cells resulting in nonuniform cartilaginous matrix deposition. Taken together, consolidating a 3000 U/ml collagenase digest of 1 h at a ratio of 10 ml/g of cartilage tissue with physical agitation cycles can improve efficiency of chondrocyte isolation, yielding robust, more uniform matrix formation.

Rapid Chondrocyte Isolation for Tissue Engineering Applications: The Effect of Enzyme Concentration and Temporal Exposure on the Matrix Forming Capacity of Nasal Derived Chondrocytes

Laboratory based processing and expansion to yield adequate cell numbers had been the standard in Autologous Disc Chondrocyte Transplantation (ADCT), Allogeneic Juvenile Chondrocyte Implantation (NuQu®), and Matrix-Induced Autologous Chondrocyte Implantation (MACI). Optimizing cell isolation is a key challenge in terms of obtaining adequate cell numbers while maintaining a vibrant cell population capable of subsequent proliferation and matrix elaboration. However, typical cell yields from a cartilage digest are highly variable between donors and based on user competency. The overall objective of this study was to optimize chondrocyte isolation from cartilaginous nasal tissue through modulation of enzyme concentration exposure (750 and 3000 U/ml) and incubation time (1 and 12 h), combined with physical agitation cycles, and to assess subsequent cell viability and matrix forming capacity. Overall, increasing enzyme exposure time was found to be more detrimental than collagenase concentration for subsequent viability, proliferation, and matrix forming capacity (sGAG and collagen) of these cells resulting in nonuniform cartilaginous matrix deposition. Taken together, consolidating a 3000 U/ml collagenase digest of 1 h at a ratio of 10 ml/g of cartilage tissue with physical agitation cycles can improve efficiency of chondrocyte isolation, yielding robust, more uniform matrix formation.

Cell-based therapies for intervertebral disc and cartilage regeneration- Current concepts, parallels, and perspectives

Lower back pain from degenerative disc disease represents a global health burden, and presents a prominent opportunity for regenerative therapeutics. While current regenerative therapies such as autologous disc chondrocyte transplantation (ADCT), allogeneic juvenile chondrocyte implantation (NuQu®), and immunoselected allogeneic adipose derived precursor cells (Mesoblast) show exciting clinical potential, limitations remain. The heterogeneity of preclinical approaches and the paucity of clinical guidance have limited translational outcomes in disc repair, lagging almost a decade behind cartilage repair. Advances in cartilage repair have evolved to single step approaches with improved orthopedic repair and regeneration. Elements from cartilage regeneration endeavors could be adopted and applied to harness translatable approaches and deliver a clinically and economically feasible regenerative surgery for back pain. In this article, we trace the developments behind the translational success of cartilage repair, examine elements to consider in achieving disc regeneration, and the need for surgical redesign. We further discuss clinical parameters, objectives, and coordination required to deliver improved regenerative surgery. Cell source, processing, and delivery modalities are key issues to be addressed in considering surgical redesign. Advances in biomanufacturing, tissue cryobanking, and point of care cell processing technology may enable intraoperative solutions for single step procedures. To maximize translational success a triad partnership between clinicians, industry, and researchers will be critical in providing instructive clinical guidelines for design as well as practical and economic considerations. This will allow a consensus in research ventures and add regenerative surgery into the algorithm in managing and treating a debilitating condition such as back pain. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:8-22, 2017.

Scaffold-free cartilage tissue engineering with a small population of human nasoseptal chondrocytes

OBJECTIVE

Cartilage tissue engineering is a promising approach to provide suitable materials for nasal reconstruction; however, it typically requires large numbers of cells. We have previously shown that a small number of chondrocytes cultivated within a continuous flow bioreactor can elicit substantial tissue growth, but translation to human chondrocytes is not trivial. Here, we aimed to demonstrate the application of the bioreactor to generate large-sized tissues from a small population of primary human nasoseptal chondrocytes.

STUDY DESIGN

Experimental study.

METHODS

Chondrocytes were cultured in the bioreactor using different medium compositions, with varying amounts of serum and with or without growth factors. Resulting engineered tissues were analyzed for physical properties, biochemical composition, tissue microstructure, and protein localization.

RESULTS

Bioreactor-cultivated constructs grown with serum and growth factors (basic fibroblast growth factor and transforming growth factor beta 2) had greater thickness, as well as DNA and glycosaminoglycan (GAG) contents, compared to low serum and no growth factor controls. These constructs also showed the most intense proteoglycan and collagen II staining.

CONCLUSION

The combination of bioreactor conditions, serum, and growth factors allowed the generation of large, thick scaffold-free human cartilaginous tissues that resembled the native nasoseptal cartilage. There also may be implications for patient selection in future clinical applications of these engineered tissues because their GAG content decreased with donor age.

LEVEL OF EVIDENCE

NA. Laryngoscope, 127:E91-E99, 2017.

Effect of bone morphogenetic proteins 2 and 7 on septal chondrocytes in alginate

Objective

To determine the effects of bone morphogenetic proteins (BMP)-2 and −7, and serum, on extracellular matrix production by human septal chondrocytes in alginate.

Study Design

Human nasal septal chondrocytes were expanded, suspended in alginate, and cultured in BMP-2 or 7, with and without serum. The optimal concentration of each growth factor was determined based on matrix production. Next, the synergistic effects of BMP-2 and −7 at optimal concentrations were determined on separate beads, based on matrix quantity and histology.

Results

Matrix content was highest with concentrations of BMP-2 and −7 of 100 ng/ml and 20 ng/ml, respectively, with serum. Adding both BMP-2 and −7, with serum, increased matrix content by factors of 5.1 versus serum-only cultures, 2.7 versus only BMP-2 with serum, and 2.4 versus only BMP-7 with serum. All comparisons were statistically significant.

Conclusion

BMP-2 and −7 significantly increase production of extracellular matrix by septal chondrocytes suspended in alginate. The presence of serum improves matrix production.

Significance

BMP-2 and −7 have great potential for use in cartilage tissue engineering.

Cementoblastic lineage formation in the cross-talk between stem cells of human exfoliated deciduous teeth and epithelial rests of Malassez cells

OBJECTIVES

The purpose of this study was to evaluate the synergistic effect of epithelial rests of Malassez cells (ERM) and transforming growth factor-β1 (TGF-β1) on proliferation, cementogenic and osteogenic differentiation of stem cells derived from human exfoliated deciduous teeth (SHED).

MATERIALS AND METHODS

SHED were co-cultured with ERM with/without TGF-β1. Then, SHED proliferation, morphological appearance, alkaline phosphatase (ALP) activity, mineralization behaviour and gene/protein expression of cemento/osteoblastic phenotype were evaluated.

RESULTS

TGF-β1 enhanced SHED proliferation when either cultured alone or co-cultured with ERM. ERM induced the cementoblastic differentiation of SHED which was significantly accelerated when treated with TGF-β1. This activity was demonstrated by high ALP activity, strong mineral deposition and upregulation of cementum/bone-related gene and protein expressions (i.e. ALP, collagen type I, bone sialoprotein, osteocalcin and cementum attachment protein).

CONCLUSIONS

ERM were able to induce SHED differentiation along the cemento/osteoblastic lineage that was triggered in the presence of TGF-β1.

CLINICAL RELEVANCE

The cemento/osteoblastic differentiation capability of SHED possesses a therapeutic potential in endodontic and periodontal tissue engineering.

Cementoblastic lineage formation in the cross-talk between stem cells of human exfoliated deciduous teeth and epithelial rests of Malassez cells

OBJECTIVES

The purpose of this study was to evaluate the synergistic effect of epithelial rests of Malassez cells (ERM) and transforming growth factor-β1 (TGF-β1) on proliferation, cementogenic and osteogenic differentiation of stem cells derived from human exfoliated deciduous teeth (SHED).

MATERIALS AND METHODS

SHED were co-cultured with ERM with/without TGF-β1. Then, SHED proliferation, morphological appearance, alkaline phosphatase (ALP) activity, mineralization behaviour and gene/protein expression of cemento/osteoblastic phenotype were evaluated.

RESULTS

TGF-β1 enhanced SHED proliferation when either cultured alone or co-cultured with ERM. ERM induced the cementoblastic differentiation of SHED which was significantly accelerated when treated with TGF-β1. This activity was demonstrated by high ALP activity, strong mineral deposition and upregulation of cementum/bone-related gene and protein expressions (i.e. ALP, collagen type I, bone sialoprotein, osteocalcin and cementum attachment protein).

CONCLUSIONS

ERM were able to induce SHED differentiation along the cemento/osteoblastic lineage that was triggered in the presence of TGF-β1.

CLINICAL RELEVANCE

The cemento/osteoblastic differentiation capability of SHED possesses a therapeutic potential in endodontic and periodontal tissue engineering.

Silk fibroin sponges with cell growth-promoting activity induced by genetically fused basic fibroblast growth factor

Transgenic silkworm technology has enabled the biological properties of silk fibroin protein to be altered by fusion to recombinant bioactive proteins. However, few studies have reported the fabrication of genetically modified fibroin proteins into three-dimensional spongy structures to serve as scaffolds for tissue engineering. We generated a transgenic silkworm strain that produces fibroin fused to basic fibroblast growth factor (bFGF) and processed the fibroin into a spongy structure using a simple freeze/thaw method. NIH3T3 mouse embryonic fibroblasts grown on bFGF-fused fibroin sponges proliferated and spread out well, showing half the population doubling time of cells cultured on wild-type fibroin sponges. Furthermore, the number of primary rabbit articular chondrocytes growing on bFGF-fused fibroin sponges was around five-times higher than that of the wild-type control at 3-days post cell-seeding. As the physical properties of wild-type and bFGF-fused fibroin sponges were almost identical, it is suggested that bFGF fused to fibroin retained its biological activity, even after the bFGF-fused fibroin was fabricated into the spongy structure. The bFGF-fused fibroin sponge has the potential for widespread application in the field of tissue engineering, and the method of fabricating this structure could be applicable to other recombinant bioactive fibroin proteins.

Nasal reconstruction using tissue engineered constructs: an update

Currently, the gold standard for reconstruction after rhinectomy or severe trauma to the nose, includes transposition of autologous mucosal flaps plus autologous cartilage grating and coverage using a skin flap. Difficulties with this approach arise where; cartilage and mucosa harvested from autologous donor sites is insufficient to achieve a passable aesthetic and functional reconstruction. Skin flaps are often bulky, poor color matches with hair follicles that reduce the aesthetic quality of the reconstruction. We suggest that tissue engineering could be a source of functional replacement tissues for nasal reconstructive surgery. However, the advancement of such an approach is dependent on the dissemination of scientific information into the clinical community, regarding the engineering of tissues such as mucosa, skin, and cartilage. This paper therefore reviews how the tissue engineering strategies available for producing clinically viable tissues could help resolve issues around reconstructing the human nose.

Compressive and tensile mechanical properties of the porcine nasal septum

The expanding nasal septal cartilage is believed to create a force that powers midfacial growth. In addition, the nasal septum is postulated to act as a mechanical strut that prevents the structural collapse of the face under masticatory loads. Both roles imply that the septum is subject to complex biomechanical loads during growth and mastication. The purpose of this study was to measure the mechanical properties of the nasal septum to determine (1) whether the cartilage is mechanically capable of playing an active role in midfacial growth and in maintaining facial structural integrity and (2) if regional variation in mechanical properties is present that could support any of the postulated loading regimens. Porcine septal samples were loaded along the horizontal or vertical axes in compression and tension, using different loading rates that approximate the in vivo situation. Samples were loaded in random order to predefined strain points (2-10%) and strain was held for 30 or 120 seconds while relaxation stress was measured. Subsequently, samples were loaded until failure. Stiffness, relaxation stress and ultimate stress and strain were recorded. Results showed that the septum was stiffer, stronger and displayed a greater drop in relaxation stress in compression compared to tension. Under compression, the septum displayed non-linear behavior with greater stiffness and stress relaxation under faster loading rates and higher strain levels. Under tension, stiffness was not affected by strain level. Although regional variation was present, it did not strongly support any of the suggested loading patterns. Overall, results suggest that the septum might be mechanically capable of playing an active role in midfacial growth as evidenced by increased compressive residual stress with decreased loading rates. However, the low stiffness of the septum compared to surrounding bone does not support a strut role. The relatively low stiffness combined with high stress relaxation under fast loading rates suggests that the nasal septum is a stress dampener, helping to absorb and dissipate loads generated during mastication.

Enhanced hyaline cartilage matrix synthesis in collagen sponge scaffolds by using siRNA to stabilize chondrocytes phenotype cultured with bone morphogenetic protein-2 under hypoxia

Cartilage healing by tissue engineering is an alternative strategy to reconstitute functional tissue after trauma or age-related degeneration. However, chondrocytes, the major player in cartilage homeostasis, do not self-regenerate efficiently and lose their phenotype during osteoarthritis. This process is called dedifferentiation and also occurs during the first expansion step of autologous chondrocyte implantation (ACI). To ensure successful ACI therapy, chondrocytes must be differentiated and capable of synthesizing hyaline cartilage matrix molecules. We therefore developed a safe procedure for redifferentiating human chondrocytes by combining appropriate physicochemical factors: hypoxic conditions, collagen scaffolds, chondrogenic factors (bone morphogenetic protein-2 [BMP-2], and insulin-like growth factor I [IGF-I]) and RNA interference targeting the COL1A1 gene. Redifferentiation of dedifferentiated chondrocytes was evaluated using gene/protein analyses to identify the chondrocyte phenotypic profile. In our conditions, under BMP-2 treatment, redifferentiated and metabolically active chondrocytes synthesized a hyaline-like cartilage matrix characterized by type IIB collagen and aggrecan molecules without any sign of hypertrophy or osteogenesis. In contrast, IGF-I increased both specific and noncharacteristic markers (collagens I and X) of chondrocytes. The specific increase in COL2A1 gene expression observed in the BMP-2 treatment was shown to involve the specific enhancer region of COL2A1 that binds the trans-activators Sox9/L-Sox5/Sox6 and Sp1, which are associated with a decrease in the trans-inhibitors of COL2A1, c-Krox, and p65 subunit of NF-kappaB. Our procedure in which BMP-2 treatment under hypoxia is associated with a COL1A1 siRNA, significantly increased the differentiation index of chondrocytes, and should offer the opportunity to develop new ACI-based therapies in humans.

Processed xenogenic cartilage as innovative biomatrix for cartilage tissue engineering: effects on chondrocyte differentiation and function

One key point in the development of new bioimplant matrices for the reconstruction and replacement of cartilage defects is to provide an adequate microenvironment to ensure chondrocyte migration and de novo synthesis of cartilage-specific extracellular matrix (ECM). A recently developed decellularization and sterilization process maintains the three-dimensional (3D) collagen structure of native septal cartilage while increasing matrix porosity, which is considered to be crucial for cartilage tissue engineering. Human primary nasal septal chondrocytes were amplified in monolayer culture and 3D-cultured on processed porcine nasal septal cartilage scaffolds. The influence of chondrogenic growth factors on neosynthesis of ECM proteins was examined at the protein and gene expression levels. Seeding experiments demonstrated that processed xenogenic cartilage matrices provide excellent environmental properties for human nasal septal chondrocytes with respect to cell adhesion, migration into the matrix and neosynthesis of cartilage-specific ECM proteins, such as collagen type II and aggrecan. Matrix biomechanical stability indicated that the constructs retrieve full stability and function during 3D culture for up to 42 days, proportional to collagen type II and GAG production. Thus, processed xenogenic cartilage offers a suitable environment for human nasal chondrocytes and has promising potential for cartilage tissue engineering in the head and neck region.

Long-term histologic changes and effects of perichondrium preservation of auricular cartilage grafted in rabbit tympanic bullae

INTRODUCTION

This study evaluated the long-term histologic changes of grafted auricular cartilage in rabbit tympanic bullae.

MATERIALS AND METHODS

Auricular cartilage with or without perichondrium was prepared and cut into small pieces to obliterate the rabbit tympanic bullae. The histologic changes of the grafted cartilage in both groups were compared 20 months after surgery.

RESULTS

Remarkable spongy bony trabeculae of mature lamellar bone with red bone marrow formation were observed in the perichondrium-preserved group. Parts of the grafted cartilage pieces were invaded and replaced by bone and bone marrow. The grafted cartilage pieces grossly maintained their original polygonal shapes, and no osteochondral tissue regeneration was observed in the perichondrium-removed group. The viable chondrocyte ratios were 46.21 ± 5.58 versus 27.80 ± 4.81%, and the minimal resorption ratios were 10.31 ± 3.27 versus 2.98 ± 1.48% in the perichondrium-preserved (n = 14) and -removed groups (n = 12, p < 0.05). The tissue ratios were cartilage: 38.18 ± 8.76 versus 52.97 ± 9.30%; lamellar bone: 18.49 ± 5.31 versus 0.82 ± 0.43%; bone marrow: 20.72 ± 6.27 versus 0.00 ± 0.00%; fibrous tissue: 10.13 ± 2.74 versus 5.81 ± 2.20%, and adipose tissue: 12.01 ± 4.48 versus 40.70 ± 7.83% in the perichondrium-preserved and -removed groups. The differences were all statistically significant (p < 0.05).

CONCLUSION

A space-filling mass effect with minimal resorption of the cartilage pieces was observed in the perichondrium-removed group. In addition to this mass effect, the progenitor cells in the preserved perichondrium allowed active bone tissue regeneration and cartilage resorption in the perichondrium-preserved group.

Cartilage tissue engineering of nasal septal chondrocyte-macroaggregates in human demineralized bone matrix

Tissue Engineering is an important method for generating cartilage tissue with isolated autologous cells and the support of biomaterials. In contrast to various gel-like biomaterials, human demineralized bone matrix (DBM) guarantees some biomechanical stability for an application in biomechanically loaded regions. The present study combined for the first time the method of seeding chondrocyte-macroaggregates in DBM for the purpose of cartilage tissue engineering. After isolating human nasal chondrocytes and creating a three-dimensional macroaggregate arrangement, the DBM was cultivated in vitro with the macroaggregates. The interaction of the cells within the DBM was analyzed with respect to cell differentiation and the inhibitory effects of chondrocyte proliferation. In contrast to chondrocyte-macroaggregates in the cell-DBM constructs, morphologically modified cells expressing type I collagen dominated. The redifferentiation of chondrocytes, characterized by the expression of type II collagen, was only found in low amounts in the cell-DBM constructs. Furthermore, caspase 3, a marker for apoptosis, was detected in the chondrocyte-DBM constructs. In another experimental setting, the vitality of chondrocytes as related to culture time and the amount of DBM was analyzed with the BrdU assay. Higher amounts of DBM tended to result in significantly higher proliferation rates of the cells within the first 48 h. After 96 h, the vitality decreased in a dose-dependent fashion. In conclusion, this study provides the proof of concept of chondrocyte-macroaggregates with DBM as an interesting method for the tissue engineering of cartilage. The as-yet insufficient redifferentiation of the chondrocytes and the sporadic initiation of apoptosis will require further investigations.

Structural characteristics of septal cartilage and mucoperichondrium

AIM

During nasal septum surgery, elevation of mucoperichondrium from the anterior nasal septum may be more difficult than from the medial and posterior septum. This study aimed to evaluate any histological structural differences between the anterior and posterior nasal septum cartilage, mucoperichondrium and intervening tissue.

MATERIAL AND METHOD

Unilateral mucoperichondrial flap elevation without infiltration was performed, after nasal tip and dorsum decortication, in four patients undergoing open septorhinoplasty. Full-thickness samples, including cartilage and mucoperichondrium, were removed from the anterior and posterior nasal septum and examined under light and electron microscopy.

RESULTS

Light microscopy showed no difference between anterior and posterior septum specimens regarding perichondrial thickness and subperichondrial cell density. Demarcation between cartilage and perichondrium and between perichondrium and lamina propria was more regular in the posterior versus the anterior septum. Electron microscopy showed no difference in chondroblast activity at the two sites.

CONCLUSION

The observed tissue demarcation irregularities may explain the greater reported difficulty in elevating anterior versus posterior nasal septum mucoperichondrium. Immunohistochemical examination would further elucidate these interstructural connections.

Insulin-like growth factor-I and growth differentiation factor-5 promote the formation of tissue-engineered human nasal septal cartilage

INTRODUCTION

Tissue engineering of human nasal septal chondrocytes offers the potential to create large quantities of autologous material for use in reconstructive surgery of the head and neck. Culture with recombinant human growth factors may improve the biochemical and biomechanical properties of engineered tissue. The objectives of this study were to (1) perform a high-throughput screen to assess multiple combinations of growth factors and (2) perform more detailed testing of candidates identified in part I.

METHODS

In part I, human nasal septal chondrocytes from three donors were expanded in monolayer with pooled human serum (HS). Cells were then embedded in alginate beads for 2 weeks of culture in medium supplemented with 2% or 10% HS and 1 of 90 different growth factor combinations. Combinations of insulin-like growth factor-I (IGF-1), bone morphogenetic protein (BMP)-2, BMP-7, BMP-13, growth differentiation factor-5 (GDF-5), transforming growth factor β (TGFβ)-2, insulin, and dexamethasone were evaluated. Glycosaminoglycan (GAG) accumulation was measured. A combination of IGF-1 and GDF-5 was selected for further testing based on the results of part I. Chondrocytes from four donors underwent expansion followed by three-dimensional alginate culture for 2 weeks in medium supplemented with 2% or 10% HS with or without IGF-1 and GDF-5. Chondrocytes and their associated matrix were then recovered and cultured for 4 weeks in 12 mm transwells in medium supplemented with 2% or 10% HS with or without IGF-1 and GDF-5 (the same medium used for alginate culture). Biochemical and biomechanical properties of the neocartilage were measured.

RESULTS

In part I, GAG accumulation was highest for growth factor combinations including both IGF-1 and GDF-5. In part II, the addition of IGF-1 and GDF-5 to 2% HS resulted in a 12-fold increase in construct thickness compared with 2% HS alone (p < 0.0001). GAG and type II collagen accumulation was significantly higher with IGF-1 and GDF-5. Confined compression modulus was greatest with 2% HS, IGF-1, and GDF-5.

CONCLUSION

Supplementation of medium with IGF-1 and GDF-5 during creation of neocartilage constructs results in increased accumulation of GAG and type II collagen and improved biomechanical properties compared with constructs created without the growth factors.

Expansion of human articular chondrocytes and formation of tissue-engineered cartilage: a step towards exploring a potential use of matrix-induced cell therapy

Monolayer culture expansion remains as a fundamental step to acquire sufficient number of cells for 3D constructs formation. It has been well-documented that cell expansion is however accompanied by cellular dedifferentiation. In order to promote cell growth and circumvent cellular dedifferentiation, we evaluated the effects of Transforming Growth Factor Beta-2 (TGF-β2), Insulin-like Growth Factor-I (IGF-I) and basic Fibroblast Growth Factor (bFGF) combination on articular chondrocytes culture and 'chondrocytes-fibrin' construct formation. Chondrocytes were serially cultured in: (1) F12:DMEM+10% Foetal Bovine Serum (FBS) with growth factors (FD10GFs), (2) F12:DMEM+2%FBS with the growth factors (FD2GFs) and, (3) F12:DMEM+10%FBS without growth factors (FD) as control. Cultured chondrocytes were evaluated by means of growth kinetics parameters, cell cycle analysis, quantitative phenotypic expression of collagen type II, aggrecan core protein sox-9 and collagen type I and, immunochemistry technique. Harvested chondrocytes were incorporated with plasma-derived fibrin and were polymerized to form the 3D constructs and implanted subcutaneously at the dorsum of athymic nude mice for eight (8) weeks. Resulted constructs were assigned for gross inspections and microscopic evaluation using standard histochemicals staining, immunochemistry technique and, quantitative phenotypic expression of cartilage markers to reassure cartilaginous tissue formation. Growth kinetics performance of chondrocytes cultured in three (3) types of culture media from the most to least was in the following order: FD10GFs>FD2GFs>FD. Following growth kinetics analysis, we decided to use FD10GFs and FD (control) for further evaluation and 'chondrocytes-fibrin' constructs formation. Chondrocytes cultured in FD10GFs preserved the normal diploid state (2c) with no evidence of aneuploidy, haploidy or tetraploidy. Expression of cartilage-specific markers namely collagen type II, aggrecan core protein and sox-9 were significantly higher in FD10GFs when compared to control. After implantation, 'chondrocytes-fibrin' constructs exhibited firm, white, smooth and glistening cartilage-like properties. FD10GFs constructs formed better quality cartilage-like tissue than FD constructs in term of overall cartilaginous tissue formation, cells organization and extracellular matrix distribution in the specimens. Cartilaginous tissue formation was confirmed by the presence of lacunae and cartilage-isolated cells embedded within basophilic ground substance. Presence of proteoglycan was confirmed by positive Safranin O staining. Collagen type II exhibited immunopositivity at the pericellular and inter-territorial matrix area. Chondrogenic properties of the construct were further confirmed by the expression of genes encoding collagen type II, aggrecan core protein and sox9. In conclusion, FD10GFs promotes the proliferation of chondrocytes and formation of good quality 'chondrocytes-fibrin' constructs which may have potential use of matrix-induced cell implantation.

Effect of bone morphogenetic protein-2 on normal and osteoarthritic human articular chondrocytes

In this study, we investigated whether Bone Morphogenetic Protein-2 (BMP-2) could modulate dedifferentiation, apoptosis and proliferation capacity in the normal and OA cultured chondrocytes. The articular chondrocytes from normal (n = 4) and OA (n = 4) cartilages were harvested separately. The chondrocytes were cultured in monolayer in the presence of 100 ng mL(-1) BMP-2 and 1% FBS as a test group and 1% FBS alone as a control group. Then, the chondrocytes were harvested and assessed for morphology with invert microscopy, proliferation by using MTT-assay and apoptosis with caspase-3 immunocytochemistry. The results indicated that the normal and the most OA chondrocytes showed round and polygonal appearance with chondrocyte-like morphology in BMP-2 treated groups after 6 days. The MTT proliferation test didn't show significant difference between test and control groups. The OA cells showed proliferation rate higher than the normal cells and significant difference in the presence of BMP-2 was observed (p<0.05). Positive immunostaining of caspase-3 in test and control groups was 1 and 20% in normal and 30 and 43% in OA groups, respectively. The percentage of apoptosis was reduced in the presence of BMP-2. In conclusion, it appears that BMP-2 involves in suppression of dedifferentiation and apoptosis processes of cultured human chondrocytes.

Fibrochondrogenesis of hESCs: growth factor combinations and cocultures

The successful differentiation of human embryonic stem cells (hESCs) to fibrochondrocyte-like cells and characterization of these differentiated cells is a critical step toward tissue engineering of musculoskeletal fibrocartilages (e.g., knee meniscus, temporomandibular joint disc, and intervertebral disc). In this study, growth factors and primary cell cocultures were applied to hESC embryoid bodies (EBs) for 3 weeks and evaluated for their effect on the synthesis of critical fibrocartilage matrix components: glycosaminoglycans (GAG) and collagens (types I, II, and VI). Changes in surface markers (CD105, CD44, SSEA, PDGFR alpha) after the differentiation treatments were also analyzed. The study was conducted in three phases: (1) examination of growth factors (TGF-beta 3, BMP-2, BMP-4, BMP-6, PDGF-BB, sonic hedgehog protein); (2) comparison of two cocultures (primary chondrocytes or fibrochondrocytes); and (3) the combination of the most effective growth factor and coculture regimen. TGF-beta 3 with BMP-4 yielded EBs positive for collagens I, II, and VI, with up to 6.7- and 4.8-fold increases in GAG and collagen, respectively. Analysis of cell surface markers showed a significant increase in CD44 with the TGF-beta 3 + BMP-4 treatment compared to the controls. Coculture with fibrochondrocytes resulted in up to a 9.8-fold increase in collagen II production. The combination of the growth factors BMP-4 + TGF-beta 3 with the fibrochondrocyte coculture led to an increase in cell proliferation and GAG production compared to either treatment alone. This study determined two powerful treatments for inducing fibrocartilaginous differentiation of hESCs and provides a foundation for using flow cytometry to purify these differentiated cells.

Cells and biomaterials in cartilage tissue engineering

Cartilage defects are notoriously difficult to repair and owing to the long-term prognosis of osteoarthritis, and a rapidly aging population, a need for new therapies is pressing. Cell-based therapies for cartilage regeneration were introduced into patients in the early 1990s. Since that time the technology has developed from a simple cell suspension to more complex 3D structures. Cells, both chondrocytes and stem cells, have been incorporated into scaffold material with the aim to better recreate the natural environment of the cell, while providing more structural support to withstand the large forces applied on the de novo tissue. This review aims to provide an overview of potential cell sources and different scaffold materials, which are in development for cartilage tissue engineering.

Creating a spectrum of fibrocartilages through different cell sources and biochemical stimuli

In this study a scaffoldless approach was employed with two different cell sources and biochemical stimuli to engineer a spectrum of fibrocartilages representative of the different regions of the knee meniscus. Constructs composed of 100% fibrochondrocytes (FC) or a 50:50 co-culture of fibrochondrocytes and chondrocytes (CC) were cultured in 10% fetal bovine serum medium or serum-free "chondrogenic" medium, each +/-10 ng/mL TGF-beta1 (+T). Constructs from these two cell groups and four culture conditions were cultured for 6 weeks. By varying the cell type and presence of the growth factor, GAG per dry weight of the constructs spanned that of native tissue, ranging 16-45% and 1-7% in the CC and FC groups, respectively. Collagen density was most dependent on cell type and was significantly lower than tissue values. The collagen I/II ratio could be manipulated by cell type and serum presence to span the native range, from 3.5 in the serum-free CC group to over 1,000 in the FC groups treated with serum-containing medium. Using the CC cell group in the presence of serum-free medium dramatically increased the compressive stiffness to 128 +/- 34 kPa, similar to native tissue. Similarly, serum-free medium or TGF-beta1 treatment enhanced the tensile modulus by an order of magnitude, up to 3,000 kPa. Using two cell sources and manipulating biochemical stimuli, a range of fibrocartilaginous neotissues was engineered. Fibrocartilages such as the knee meniscus are characterized by heterogeneity in matrix and functional properties, and this work demonstrates a strategy for recreating these heterogeneous tissues.

Effect of cell density on the rate of glycosaminoglycan accumulation by disc and cartilage cells in vitro

Aggrecan concentration falls markedly during cartilage and disc degeneration with unfortunate biomechanical and physiological consequences. There is thus now an increasing interest in developing biological methods for its replacement. One approach is to stimulate aggrecan and hence glycosaminoglycan (GAG) production by resident cells through growth factor or genetic engineering. Another approach is to implant autologous cells into the cartilage or disc to enhance GAG production. In both instances GAG accumulation depends both on the number of active cells in the cartilage or disc and the rate of aggrecan synthesis per cell. Here we examine how cell density influences the rate of glycosaminoglycan accumulation in a three-dimensional cell culture system. In the results, at cell densities found in vivo (standard condition) in the articular cartilage and the disc nucleus viz. 4 million cells/ml and at 21% oxygen the concentration of GAG in the bead reached 520.9+/-62.4 microg/ml and 649.0+/-40.1 microg/ml, respectively, in 5 days. These concentrations could be increased to 2-4-fold by raising cell density to 25 million cells/ml. However, rates of GAG production per cell decreased by 50-60%. These results showed that rate of accumulation of glycosaminoglycan in this culture system in vitro is slow and is limited both by the rate of production of GAG per cell and by the cell density which can be maintained in a viable state. Although GAG production can be increased somewhat by use of higher cell densities, the consequent fall in concentration of oxygen and other nutrients in the center of three-dimensional constructs slows metabolism and leads to apoptosis and cell death, which again limits the rate that the cells can produce matrix.

Short-term effects of perichondrium preservation on chondrocyte survival and chondrogenesis of auricular cartilage grafted in rabbit tympanic bullae

INTRODUCTION

Obliteration of the mastoid cavities with auricular cartilage is a frequently used method to minimize the open cavity problem in cholesteatoma surgery. However, the method of cartilage preparation and histopathologic changes of the grafted cartilage in patients receiving mastoid obliteration are rarely reported. Hence, the authors developed rabbit tympanic bulla obliteration with auricular cartilage as an animal model and studied the effects of perichondrium preservation on the grafted cartilage.

MATERIALS AND METHODS

Auricular cartilage with or without perichondrium was prepared and cut into small pieces to obliterate rabbit tympanic bullae. Four weeks after surgery, the viable chondrocyte ratio indicated by the number of viable chondrocytes divided by the total number of chondrocytes, the microvascular density shown by CD31-labeled vessels, and the chondrogenesis ratio represented by the ratio of the cross-sectional areas of the newly formed cartilage and the originally grafted cartilage were calculated and compared.

RESULTS

The viable chondrocyte ratio was 49.21 +/- 10.17% in the perichondrium-preserved group (n = 12) and 35.46 +/- 3.96% in the perichondrium-removed group (n = 12, p = 0.001). The CD31 microvascular density was significantly higher in the perichondrium-preserved group than in the perichondrium-removed group (167.77 +/- 15.83 vs. 77.17 +/- 19.67 microvessels/mm(2), p < 0.001). The chondrogenesis ratios were 27.58 +/- 12.44% in the perichondrium-preserved group and 0.45 +/- 0.63% in the perichondrium-removed group (p < 0.001).

CONCLUSION

Obliteration of tympanic bullae with perichondrium-preserved cartilage results in faster restoration of circulation, higher survival of chondrocytes and more cartilage regeneration than with perichondrium-removed cartilage.

Engineering cartilage tissue

Cartilage tissue engineering is emerging as a technique for the regeneration of cartilage tissue damaged due to disease or trauma. Since cartilage lacks regenerative capabilities, it is essential to develop approaches that deliver the appropriate cells, biomaterials, and signaling factors to the defect site. The objective of this review is to discuss the approaches that have been taken in this area, with an emphasis on various cell sources, including chondrocytes, fibroblasts, and stem cells. Additionally, biomaterials and their interaction with cells and the importance of signaling factors on cellular behavior and cartilage formation will be addressed. Ultimately, the goal of investigators working on cartilage regeneration is to develop a system that promotes the production of cartilage tissue that mimics native tissue properties, accelerates restoration of tissue function, and is clinically translatable. Although this is an ambitious goal, significant progress and important advances have been made in recent years.

In vitro cartilage tissue formation by Co-culture of primary and passaged chondrocytes

Passaging chondrocytes to increase cell number is one way to overcome the major limitation to cartilage tissue engineering, which is obtaining sufficient numbers of chondrocytes to form large amounts of tissue. Because neighboring cells can influence cell phenotype and because passaging induces dedifferentiation, we examined whether coculture of primary and passaged bovine articular chondrocytes in 3-dimensional culture would form cartilage tissue in vitro. Chondrocytes passaged in monolayer culture up to 4 times were mixed with primary (nonpassaged) chondrocytes (5-40% of total cell number) and grown on filter inserts for up to 4 weeks. Passaged cells alone did not form cartilage, but with the addition of increasing numbers of primary chondrocytes, up to 20%, there was an increase in cartilage tissue formation as determined histologically and biochemically and demonstrated by increasing proteoglycan and collagen accumulation. The passaged cells appeared to be undergoing redifferentiation, as indicated by up-regulation of aggrecan, type II collagen, and SOX9 gene expression and decreased type I collagen expression. This switch in collagen type was confirmed using Western blots. Confocal microscopy showed that fluorescently labeled primary cells were distributed throughout the tissue. This coculture approach could provide a new way to solve the problem of limited cell number for cartilage tissue engineering.

Synergistic effect of IGF-1 and OP-1 on matrix formation by normal and OA chondrocytes cultured in alginate beads

OBJECTIVE

Growth factor therapy may be useful for stimulation of cartilage matrix synthesis and repair. Thus, the purpose of our study was to further understand the effect of combined insulin-like growth factor-1 (IGF-1) and osteogenic protein-1 (OP-1) treatment on the matrix synthesized by human adult normal and osteoarthritic (OA) chondrocytes.

DESIGN

Chondrocytes were isolated post-mortem from articular cartilage from tali of normal human donors and femoral condyles of OA patients undergoing knee replacement surgery. Cells were cultured in alginate beads for 21 days in four experimental groups: (1) "mini-ITS" control; (2) 100 ng/ml IGF-1; (3) 100 ng/ml OP-1; (4) IGF-1+OP-1, each at 100 ng/ml. Beads were processed for histological (Safranin O and fast green), morphometrical and immunohistochemical (aggrecan, decorin, type I, II, VI, and X collagens, and fibronectin accumulation) analyses.

RESULTS

Histology showed that IGF-1 alone did not induce substantial matrix production. OP-1 alone caused a considerable matrix formation, but the highest matrix accumulation by normal and OA chondrocytes was found when OP-1 and IGF-1 were added together. Morphometrical analysis indicated larger matrices produced by OA chondrocytes than by normal cells under the combined treatment. All tested matrix proteins were more abundant in the combination group. Type X collagen was detected only under the combined OP-1 and IGF-1 treatment and was present at very low levels. Type I collagen was found only in OA chondrocytes.

CONCLUSIONS

The results obtained in the current study suggest that combined therapy with IGF-1 and OP-1 may have a greater potential in treating cartilage defects seen in OA than use of either growth factor alone.

Biochemical and functional modulation of the cartilage collagen network by IGF1, TGFbeta2 and FGF2

OBJECTIVE

Examine effects of insulin-like growth factor 1 (IGF1), transforming growth factor beta2 (TGFbeta2) and fibroblast growth factor 2 (FGF2) on proteoglycan and collagen network and biomechanical properties of the newly formed cartilage matrix.

METHODS

Bovine articular chondrocytes were cultured in alginate beads for 3 weeks with or without FGF2, TGFbeta2 or IGF1 in the presence of 10% FCS. Proteoglycan content, collagen content, hydroxylysylpyridinoline cross-links and overall matrix metalloproteinase (MMP) activity in the culture medium were measured. Alginate disks cultured for 5 weeks were used to evaluate the effect of growth factors on mechanical properties of the construct by determining the equilibrium aggregate modulus and secant modulus.

RESULTS

IGF1 increased collagen and proteoglycan deposition. FGF2 mainly decreased collagen deposition and TGFbeta2 proteoglycan deposition. A decrease in cross-links was observed in matrix produced by chondrocytes cultured in the presence of TGFbeta2. IGF1 and FGF2 had no influence on the number of cross-links per collagen molecule. Overall MMP activity was significantly higher in culture medium of cells cultured with FGF2. TGFbeta2 and IGF1 had no effect on MMP activity. After 35 days of culture, the matrix produced under influence of IGF1 had a lower permeability and a trend to increase stiffness. FGF2 showed a trend to lower both properties. TGFbeta2 had no effect on these parameters.

CONCLUSION

IGF1, TGFbeta2 and FGF2 had differential effects on collagen network formation. Of the three growth factors tested, IGF1 seems to be best in promoting the formation of a functional collagen network since it increased proteoglycan and collagen deposition and improved the mechanical properties.

Alginate Hydrogels as Biomaterials

[Image: see text] Alginate hydrogels are proving to have a wide applicability as biomaterials. They have been used as scaffolds for tissue engineering, as delivery vehicles for drugs, and as model extracellular matrices for basic biological studies. These applications require tight control of a number of material properties including mechanical stiffness, swelling, degradation, cell attachment, and binding or release of bioactive molecules. Control over these properties can be achieved by chemical or physical modifications of the polysaccharide itself or the gels formed from alginate. The utility of these modified alginate gels as biomaterials has been demonstrated in a number of in vitro and in vivo studies.Micro-CT images of bone-like constructs that result from transplantation of osteoblasts on gels that degrade over a time frame of several months leading to improved bone formation.