Tissue Engineering of Tendons: A Comparison of Muscle-Derived Cells, Tenocytes, and Dermal Fibroblasts as Cell Sources

Macromolecular crowding in human tenocyte and skin fibroblast cultures: A comparative analysis

Although human tenocytes and dermal fibroblasts have shown promise in tendon engineering, no tissue engineered medicine has been developed due to the prolonged ex vivo time required to develop an implantable device. Considering that macromolecular crowding has the potential to substantially accelerate the development of functional tissue facsimiles, herein we compared human tenocyte and dermal fibroblast behaviour under standard and macromolecular crowding conditions to inform future studies in tendon engineering. Basic cell function analysis made apparent the innocuousness of macromolecular crowding for both cell types. Gene expression analysis of the without macromolecular crowding groups revealed expression of tendon related molecules in human dermal fibroblasts and tenocytes. Protein electrophoresis and immunocytochemistry analyses showed significantly increased and similar deposition of collagen fibres by macromolecular crowding in the two cell types. Proteomics analysis demonstrated great similarities between human tenocyte and dermal fibroblast cultures, as well as the induction of haemostatic, anti-microbial and tissue-protective proteins by macromolecular crowding in both cell populations. Collectively, these data rationalise the use of either human dermal fibroblasts or tenocytes in combination with macromolecular crowding in tendon engineering.

Development of tropoelastin-functionalized anisotropic PCL scaffolds for musculoskeletal tissue engineering

The highly organized extracellular matrix (ECM) of musculoskeletal tissues, encompassing tendons, ligaments and muscles, is structurally anisotropic, hierarchical and multi-compartmental. These features collectively contribute to their unique function. Previous studies have investigated the effect of tissue-engineered scaffold anisotropy on cell morphology and organization for musculoskeletal tissue repair and regeneration, but the hierarchical arrangement of ECM and compartmentalization are not typically replicated. Here, we present a method for multi-compartmental scaffold design that allows for physical mimicry of the spatial architecture of musculoskeletal tissue in regenerative medicine. This design is based on an ECM-inspired macromolecule scaffold. Polycaprolactone (PCL) scaffolds were fabricated with aligned fibers by electrospinning and mechanical stretching, and then surface-functionalized with the cell-supporting ECM protein molecule, tropoelastin (TE). TE was attached using two alternative methods that allowed for either physisorption or covalent attachment, where the latter was achieved by plasma ion immersion implantation (PIII). Aligned fibers stimulated cell elongation and improved cell alignment, in contrast to randomly oriented fibers. TE coatings bound by physisorption or covalently following 200 s PIII treatment promoted fibroblast proliferation. This represents the first cytocompatibility assessment of novel PIII-treated TE-coated PCL scaffolds. To demonstrate their versatility, these 2D anisotropic PCL scaffolds were assembled into 3D hierarchical constructs with an internally compartmentalized structure to mimic the structure of musculoskeletal tissue.

Isolation and identification of a mesenchymal stem/stromal cell-like population from pediatric urethral tissue

Mesenchymal stem cells (MSCs) are important seed cells for cell therapy and tissue engineering because of their multidirectional differentiation potential, high proliferative capacity, low immunogenicity, and immunomodulatory ability. In this study, we successfully isolated and cultured a population of mesenchymal stem-like cells from pediatric urethra (PU-MSLCs). The cells had a spindle-shaped fibroblast-like morphology, similar to MSCs derived from other tissues. The PU-MSLCs highly expressed MSC surface markers CD29, CD73, CD90, and CD105 but were negative for leukocyte common antigen CD45, and MHC class II-encoded molecule HLA-DR. After in vitro induction, the PU-MSLCs had the potential to differentiate into adipocytes, osteocytes, and chondrocytes. The PU-MSLCs maintained a normal karyotype and showed no tumorigenicity during long-term cultivation. We thus demonstrated that the mesenchymal stem/stromal cell-like population obtained from pediatric urethra tissue is capable of self-renewal and multidirectional differentiation, has promising application prospects for cell therapy and tissue engineering, and is expected to contribute to urethral tissue reconstruction.

Synergistic effects of myogenic cells and fibroblasts on the promotion of engineered tendon regeneration with muscle derived cells

AIMS

Tendon development requires the coordinated interaction of muscles and tendons. Muscle-derived cells (MDCs), a mixed cell population containing both myogenic and fibroblastic cell subsets, have been found to be ideal seed cells for tendon regeneration. However, the necessity of these cell types for tendon regeneration has not yet been tested. In this study, we aim to explore the possible synergistic effects of myogenic cells and fibroblasts in engineered tendon regeneration.

METHODS

MDCs were separated into rapidly adhering cell (RAC; fibroblasts) and slowly adhering cell (SAC; myogenic cells) populations. Myogenic- and tenogenic-related molecules were analyzed by immunofluorescent staining, RT-PCR and real-time PCR. The proliferative abilities of MDCs, RACs and SACs were also evaluated. Cell-scaffold constructs were implanted into nude mice, and subsequently evaluated for their histologic, ultrastructure, gene expression, and biomechanical characteristics.

RESULTS

MDCs have better proliferative activity than RAC and SAC population. RACs could express higher levels of tenogenic-related molecules tenomodulin (TNMD) and scleraxis (SCX) than SACs. Whereas SACs only expressed myogenic-related molecules MyoD. In contrast to the tendons engineered using RACs and SACs, the tendons engineered using MDCs exhibited a relatively more mature and well-organized tissue structure and ultrastructure as well as better mechanical properties.

CONCLUSIONS

Fibroblasts in muscle may be the primary cell population involved in tendon regeneration and that myogenic cells are an important component of the niche and control the fibroblast activity during tendon regeneration. The synergistic effects between fibroblasts and myogenic cells significantly contribute to efficient and effective regeneration of engineered tendons.

Engineering multi-tissue units for regenerative Medicine: Bone-tendon-muscle units of the rotator cuff

Our body systems are comprised of numerous multi-tissue units. For the musculoskeletal system, one of the predominant functional units is comprised of bone, tendon/ligament, and muscle tissues working in tandem to facilitate locomotion. To successfully treat musculoskeletal injuries and diseases, critical consideration and thoughtful integration of clinical, biological, and engineering aspects are necessary to achieve translational bench-to-bedside research. In particular, identifying ideal biomaterial design specifications, understanding prior and recent tissue engineering advances, and judicious application of biomaterial and fabrication technologies will be crucial for addressing current clinical challenges in engineering multi-tissue units. Using rotator cuff tears as an example, insights relevant for engineering a bone-tendon-muscle multi-tissue unit are presented. This review highlights the tissue engineering strategies for musculoskeletal repair and regeneration with implications for other bone-tendon-muscle units, their derivatives, and analogous non-musculoskeletal tissue structures.

Tendon Extracellular Matrix Assembly, Maintenance and Dysregulation Throughout Life

In his Lissner Award medal lecture in 2000, Stephen Cowin asked the question: "How is a tissue built?" It is not a new question, but it remains as relevant today as it did when it was asked 20 years ago. In fact, research on the organization and development of tissue structure has been a primary focus of tendon and ligament research for over two centuries. The tendon extracellular matrix (ECM) is critical to overall tissue function; it gives the tissue its unique mechanical properties, exhibiting complex non-linear responses, viscoelasticity and flow mechanisms, excellent energy storage and fatigue resistance. This matrix also creates a unique microenvironment for resident cells, allowing cells to maintain their phenotype and translate mechanical and chemical signals into biological responses. Importantly, this architecture is constantly remodeled by local cell populations in response to changing biochemical (systemic and local disease or injury) and mechanical (exercise, disuse, and overuse) stimuli. Here, we review the current understanding of matrix remodeling throughout life, focusing on formation and assembly during the postnatal period, maintenance and homeostasis during adulthood, and changes to homeostasis in natural aging. We also discuss advances in model systems and novel tools for studying collagen and non-collagenous matrix remodeling throughout life, and finally conclude by identifying key questions that have yet to be answered.

Rebuilding Tendons: A Concise Review on the Potential of Dermal Fibroblasts

Tendons are vital to joint movement by connecting muscles to bones. Along with an increasing incidence of tendon injuries, tendon disorders can burden the quality of life of patients or the career of athletes. Current treatments involve surgical reconstruction and conservative therapy. Especially in the elderly population, tendon recovery requires lengthy periods and it may result in unsatisfactory outcome. Cell-mediated tendon engineering is a rapidly progressing experimental and pre-clinical field, which holds great potential for an alternative approach to established medical treatments. The selection of an appropriate cell source is critical and remains under investigation. Dermal fibroblasts exhibit multiple similarities to tendon cells, suggesting they may be a promising cell source for tendon engineering. Hence, the purpose of this review article was in brief, to compare tendon to dermis tissues, and summarize in vitro studies on tenogenic differentiation of dermal fibroblasts. Furthermore, analysis of an open source Gene Expression Omnibus (GEO) data repository was carried out, revealing great overlap in the molecular profiles of both cell types. Lastly, a summary of in vivo studies employing dermal fibroblasts in tendon repair as well as pilot clinical studies in this area is included. Altogether, dermal fibroblasts hold therapeutic potential and are attractive cells for rebuilding injured tendons.

From the perspective of embryonic tendon development: various cells applied to tendon tissue engineering

There is a high risk of injury from damage to the force-bearing tissue of the tendon. Due to its poor self-healing ability, clinical interventions for tendon injuries are limited and yield unsatisfying results. Tissue engineering might supply an alternative to this obstacle. As one of the key elements of tissue engineering, various cell sources have been used for tendon engineering, but there is no consensue concerning a single optimal source. In this review, we summarized the development of tendon tissue from the embryonic stage and categorized the used cell sources in tendon engineering. By comparing various cell sources as the candidates for tendon regeneration, each cell type was found to have its advantages and limitations; therefore, it is difficult to define the best cell source for tendon engineering. The microenvironment cells located is also crucial for cell growth and differentiation; so, the optimal cells are unlikely to be the same for each patient. In the future, the clinical application of tendon engineering might be more precise and customized in contrast to the current use of a standardized/generic one-size-fits-all procedure. The best cell source for tendon engineering will require a case-based assessment.

Skeletal muscle-derived cells repair peripheral nerve defects in mice

Skeletal muscle-derived cells have strong secretory function, while skeletal muscle-derived stem cells, which are included in muscle-derived cells, can differentiate into Schwann cell-like cells and other cell types. However, the effect of muscle-derived cells on peripheral nerve defects has not been reported. In this study, 5-mm-long nerve defects were created in the right sciatic nerves of mice to construct a peripheral nerve defect model. Adult female C57BL/6 mice were randomly divided into four groups. For the muscle-derived cell group, muscle-derived cells were injected into the catheter after the cut nerve ends were bridged with a polyurethane catheter. For external oblique muscle-fabricated nerve conduit and polyurethane groups, an external oblique muscle-fabricated nerve conduit or polyurethane catheter was used to bridge the cut nerve ends, respectively. For the sham group, the sciatic nerves on the right side were separated but not excised. At 8 and 12 weeks post-surgery, distributions of axons and myelin sheaths were observed, and the nerve diameter was calculated using immunofluorescence staining. The number, diameter, and thickness of myelinated nerve fibers were detected by toluidine blue staining and transmission electron microscopy. Muscle fiber area ratios were calculated by Masson’s trichrome staining of gastrocnemius muscle sections. Sciatic functional index was recorded using walking footprint analysis at 4, 8, and 12 weeks after operation. The results showed that, at 8 and 12 weeks after surgery, myelin sheaths and axons of regenerating nerves were evenly distributed in the muscle-derived cell group. The number, diameter, and myelin sheath thickness of myelinated nerve fibers, as well as gastrocnemius muscle wet weight and muscle area ratio, were significantly higher in the muscle-derived cell group compared with the polyurethane group. At 4, 8, and 12 weeks post-surgery, sciatic functional index was notably increased in the muscle-derived cell group compared with the polyurethane group. These criteria of the muscle-derived cell group were not significantly different from the external oblique muscle-fabricated nerve conduit group. Collectively, these data suggest that muscle-derived cells effectively accelerated peripheral nerve regeneration. This study was approved by the Animal Ethics Committee of Plastic Surgery Hospital, Chinese Academy of Medical Sciences (approval No. 040) on September 28, 2016.

Grafted muscle-derived stem cells promote the therapeutic efficiency of epimysium conduits in mice with peripheral nerve gap injury

Our research aimed to build allogeneic artificial conduits with epimysium and muscle-derived stem cells (MDSCs) from the skeletal muscle of mice. We applied the conduit to repair peripheral nerve defects and estimated the effectiveness of the repair process. In the research, we prepared epimysium conduits with lumens to bridge repair a 5-mm-long sciatic nerve defect from C57 wild-type mice and then transplanted green fluorescent protein (GFP)-MDSCs and Matrigel suspensions into the conduit. Histological and functional assessments were performed 4 and 8 weeks after surgery. The tissue-engineered conduit from muscle effectively repaired the nerve defect, while the group with GFP-MDSCs showed improved histological examinations and functional assessments, and the newborn nerves highly expressed GFP. As the results suggested, autologous epimysium conduits represent a reliable method to repair peripheral nerve defects, and the addition of MDSCs promote the effectiveness of differentiating into multiple lineages. Our research simultaneously demonstrated the myogenic, neurogenic, and angiogenic potential of MDSCs in vivo for the first time.

Stem Cell Therapy for Tendon Regeneration: Current Status and Future Directions

In adults the healing tendon generates fibrovascular scar tissue and recovers never histologically, mechanically, and functionally which leads to chronic and to degenerative diseases. In this review, the processes and mechanisms of tendon development and fetal regeneration in comparison to adult defect repair and degeneration are discussed in relation to regenerative therapeutic options. We focused on the application of stem cells, growth factors, transcription factors, and gene therapy in tendon injury therapies in order to intervene the scarring process and to induce functional regeneration of the lesioned tissue. Outlines for future therapeutic approaches for tendon injuries will be provided.

Histological evaluation of tendon formation using a scaffold-free three-dimensional-bioprinted construct of human dermal fibroblasts under in vitro static tensile culture

Introduction

Tendon tissue engineering requires scaffold-free techniques for safe and long-term clinical applications and to explore alternative cell sources to tenocytes. Therefore, we histologically assessed tendon formation in a scaffold-free Bio-three-dimensional (3D) construct developed from normal human dermal fibroblasts (NHDFs) using our Bio-3D printer system under tensile culture in vitro.

Methods

Scaffold-free ring-like tissues were constructed from 120 multicellular spheroids comprising NHDFs using a bio-3D printer. Ring-like tissues were cultured in vitro under static tensile-loading with or without in-house tensile devices (tension-loaded and tension-free groups), with increases in tensile strength applied weekly to the tensile-loaded group. After a 4 or 8-week culture on the device, we evaluated histological findings according to tendon-maturing score and immunohistological findings of the middle portion of the tissues for both groups (n = 4, respectively).

Results

Histology of the tension-loaded group revealed longitudinally aligned collagen fibers with increased collagen deposition and spindle-shaped cells with prolonged culture. By contrast, the tension-free group showed no organized cell arrangement or collagen fiber structure. Additionally, the tension-loaded group showed a significantly improved tendon-maturing score as compared with that for the tension-free group at week 8. Moreover, immunohistochemistry revealed tenascin C distribution with a parallel arrangement in the tensile-loading direction at week 8 in the tension-loaded group, which exhibited stronger scleraxis-staining intensity than that observed in the tension-free group at weeks 4 and 8.

Conclusions

The NHDF-generated scaffold-free Bio-3D construct underwent remodeling and formed tendon-like structures under tensile culture in vitro.

Plasma-Coated Polycaprolactone Nanofibers with Covalently Bonded Platelet-Rich Plasma Enhance Adhesion and Growth of Human Fibroblasts

Biodegradable nanofibers are extensively employed in different areas of biology and medicine, particularly in tissue engineering. The electrospun polycaprolactone (PCL) nanofibers are attracting growing interest due to their good mechanical properties and a low-cost structure similar to the extracellular matrix. However, the unmodified PCL nanofibers exhibit an inert surface, hindering cell adhesion and negatively affecting their further fate. The employment of PCL nanofibrous scaffolds for wound healing requires a certain modification of the PCL surface. In this work, the morphology of PCL nanofibers is optimized by the careful tuning of electrospinning parameters. It is shown that the modification of the PCL nanofibers with the COOH plasma polymers and the subsequent binding of NH2 groups of protein molecules is a rather simple and technologically accessible procedure allowing the adhesion, early spreading, and growth of human fibroblasts to be boosted. The behavior of fibroblasts on the modified PCL surface was found to be very different when compared to the previously studied cultivation of mesenchymal stem cells on the PCL nanofibrous meshes. It is demonstrated by X-ray photoelectron spectroscopy (XPS) that the freeze-thawed platelet-rich plasma (PRP) immobilization can be performed via covalent and non-covalent bonding and that it does not affect biological activity. The covalently bound components of PRP considerably reduce the fibroblast apoptosis and increase the cell proliferation in comparison to the unmodified PCL nanofibers or the PCL nanofibers with non-covalent bonding of PRP. The reported research findings reveal the potential of PCL matrices for application in tissue engineering, while the plasma modification with COOH groups and their subsequent covalent binding with proteins expand this potential even further. The use of such matrices with covalently immobilized PRP for wound healing leads to prolonged biological activity of the immobilized molecules and protects these biomolecules from the aggressive media of the wound.

Multifactorial bottom-up bioengineering approaches for the development of living tissue substitutes

Bottom-up bioengineering utilizes the inherent capacity of cells to build highly sophisticated structures with high levels of biomimicry. Despite the significant advancements in the field, monodomain approaches require prolonged culture time to develop an implantable device, usually associated with cell phenotypic drift in culture. Herein, we assessed the simultaneous effect of macromolecular crowding (MMC) and mechanical loading in enhancing extracellular matrix (ECM) deposition while maintaining tenocyte (TC) phenotype and differentiating bone marrow stem cells (BMSCs) or transdifferentiating neonatal and adult dermal fibroblasts toward tenogenic lineage. At d 7, all cell types presented cytoskeleton alignment perpendicular to the applied load independently of the use of MMC. MMC enhanced ECM deposition in all cell types. Gene expression analysis indicated that MMC and mechanical loading maintained TC phenotype, whereas tenogenic differentiation of BMSCs or transdifferentiation of dermal fibroblasts was not achieved. Our data suggest that multifactorial bottom-up bioengineering approaches significantly accelerate the development of biomimetic tissue equivalents.-Gaspar, D., Ryan, C. N. M., Zeugolis, D. I. Multifactorial bottom-up bioengineering approaches for the development of living tissue substitutes.

A modified preplate technique for efficient isolation and proliferation of mice muscle-derived stem cells

We modified an existing protocol to develop a more efficient method to acquire and culture muscle-derived stem cells (MDSCs) and compared the characteristics of cells obtained from the two methods. This method is based on currently used multistep enzymatic digestion and preplate technique. During the replating process, we replaced the traditional medium with isolation medium to promote fibroblast-like cell adherence at initial replating step, which shortened the purifying duration by up to 4 days. Moreover, we modified the culture container to provide a stable microenvironment that promotes MDSC adherence. We compared the cell morphology, growth curve and the expression of specific markers (Sca-1, CD34, PAX7 and Desmin) between the two cell groups separately obtained from the two methods. Afterwards, we compared the neural differentiation capacity of MDSCs with other muscle-derived cell lineages. The protocol developed here is a fast and effective method to harvest and purify MDSCs from mice limb skeletal muscle.

Distinguishing tendon and ligament fibroblasts based on 1H nuclear magnetic resonance spectroscopy

Tendon and ligament (T/L) have been known to be obviously different from each other in tissue level. However, due to the overlapping gene markers, distinction in cellular level has not been clearly verified yet. Recently, the use of nuclear magnetic resonance (NMR) spectroscopy has shown the potential to detect biological markers in cellular level. Therefore, in this study we applied a non-invasive technique based on NMR spectroscopy to establish biomarkers to distinguish between T/L fibroblasts. In addition the cellular morphologies and gene expression patterns were also investigated for comparison through optical microscopy and real-time polymerase chain reaction (PCR). No difference was observed from morphology and real-time PCR results, either as expected. However, we found clear differences in their metabolomic spectra using 1H NMR spectroscopy. The calculated integral values of fatty acids (with chemical shifts at ~0.9, 1.26, 1.59, 2.05, 2.25, and 2.81 ppm), lactate (~1.33 ppm), and leucine (~2.72 ppm) were significantly different between the two types of fibroblasts. To be specific tendon group exhibited higher level of the metabolite than ligament group. In conclusion, in-cell metabolomic evaluation by NMR technique used in this study is believed to provide a promising tool in distinguishing cell types, especially T/L cells, which cannot be classified by conventional biological assays.