Vancomycin bound to Ti rods reduces periprosthetic infection: preliminary study

Modulating On-Demand Release of Vancomycin from Implant Coatings via Chemical Modification of a Micrococcal Nuclease-Sensitive Oligonucleotide Linker

Periprosthetic infections are one of the most serious complications in orthopedic surgeries, and those caused by Staphylococcus aureus (S. aureus) are particularly hard to treat due to their tendency to form biofilms on implants and their notorious ability to invade the surrounding bones. The existing prophylactic local antibiotic deliveries involve excessive drug loading doses that could risk the development of drug resistance strains. Utilizing an oligonucleotide linker sensitive to micrococcal nuclease (MN) cleavage, we previously developed an implant coating capable of releasing covalently tethered vancomycin, triggered by S. aureus-secreted MN, to prevent periprosthetic infections in the mouse intramedullary (IM) canal. To further engineer this exciting platform to meet broader clinical needs, here, we chemically modified the oligonucleotide linker by a combination of 2'-O-methylation and phosphorothioate modification to achieve additional modulation of its stability/sensitivity to MN and the kinetics of MN-triggered on-demand release. We found that when all phosphodiester bonds within the oligonucleotide linker 5'-carboxy-mCmGTTmCmG-3-acrydite, except for the one between TT, were replaced by phosphorothioate, the oligonucleotide (6PS) stability significantly increased and enabled the most sustained release of tethered vancomycin from the coating. By contrast, when only the peripheral phosphodiester bonds at the 5'- and 3'-ends were replaced by phosphorothioate, the resulting oligonucleotide (2PS) linker was cleaved by MN more rapidly than that without any PS modifications (0PS). Using a rat femoral canal periprosthetic infection model where 1000 CFU S. aureus was inoculated at the time of IM pin insertion, we showed that the prophylactic implant coating containing either 0PS- or 2PS-modified oligonucleotide linker effectively eradicated the bacteria by enabling the rapid on-demand release of vancomycin. No bacteria were detected from the explanted pins, and no signs of cortical bone changes were detected in these treatment groups throughout the 3 month follow-ups. With an antibiotic tethering dose significantly lower than conventional antibiotic-bearing bone cements, these coatings also exhibited excellent biocompatibility. These chemically modified oligonucleotides could help tailor prophylactic anti-infective coating strategies to meet a range of clinical challenges where the risks for S. aureus prosthetic infections range from transient to long-lasting.

Recent Advancements in Metallic Drug-Eluting Implants

Over the past decade, metallic drug-eluting implants have gained significance in orthopedic and dental applications for controlled drug release, specifically for preventing infection associated with implants. Recent studies showed that metallic implants loaded with drugs were substituted for conventional bare metal implants to achieve sustained and controlled drug release, resulting in a desired local therapeutic concentration. A number of secondary features can be provided by the incorporated active molecules, including the promotion of osteoconduction and angiogenesis, the inhibition of bacterial invasion, and the modulation of host body reaction. This paper reviews recent trends in the development of the metallic drug-eluting implants with various drug delivery systems in the past three years. There are various types of drug-eluting implants that have been developed to meet this purpose, depending on the drug or agents that have been loaded on them. These include anti-inflammatory drugs, antibiotics agents, growth factors, and anti-resorptive drugs.

Functionalized Self-Assembled Monolayers: Versatile Strategies to Combat Bacterial Biofilm Formation

Bacterial infections due to biofilms account for up to 80% of bacterial infections in humans. With the increased use of antibiotic treatments, indwelling medical devices, disinfectants, and longer hospital stays, antibiotic resistant infections are sharply increasing. Annual deaths are predicted to outpace cancer and diabetes combined by 2050. In the past two decades, both chemical and physical strategies have arisen to combat biofilm formation on surfaces. One such promising chemical strategy is the formation of a self-assembled monolayer (SAM), due to its small layer thickness, strong covalent bonds, typically facile synthesis, and versatility. With the goal of combating biofilm formation, the SAM could be used to tether an antibacterial agent such as a small-molecule antibiotic, nanoparticle, peptide, or polymer to the surface, and limit the agent’s release into its environment. This review focuses on the use of SAMs to inhibit biofilm formation, both on their own and by covalent grafting of a biocidal agent, with the potential to be used in indwelling medical devices. We conclude with our perspectives on ongoing challenges and future directions for this field.

Anti-Periprosthetic Infection Strategies: From Implant Surface Topographical Engineering to Smart Drug-Releasing Coatings

Despite advanced implant sterilization and aseptic surgical techniques, periprosthetic bacterial infection remains a major challenge for orthopedic and dental implants. Bacterial colonization/biofilm formation around implants and their invasion into the dense skeletal tissue matrices are difficult to treat and could lead to implant failure and osteomyelitis. These complications require major revision surgeries and extended antibiotic therapies that are associated with high treatment cost, morbidity, and even mortality. Effective preventative measures mitigating risks for implant-related infections are thus in dire need. This review focuses on recent developments of anti-periprosthetic infection strategies aimed at either reducing bacterial adhesion, colonization, and biofilm formation or killing bacteria directly in contact with and/or in the vicinity of implants. These goals are accomplished through antifouling, quorum-sensing interfering, or bactericidal implant surface topographical engineering or surface coatings through chemical modifications. Surface topographical engineering of lotus leaf mimicking super-hydrophobic antifouling features and cicada wing-mimicking, bacterium-piercing nanopillars are both presented. Conventional physical coating/passive release of bactericidal agents is contrasted with their covalent tethering to implant surfaces through either stable linkages or linkages labile to bacterial enzyme cleavage or environmental perturbations. Pros and cons of these emerging anti-periprosthetic infection approaches are discussed in terms of their safety, efficacy, and translational potentials.

Targeting implant-associated infections: titanium surface loaded with antimicrobial

Implant devices have = proven a successful treatment modality in reconstructive surgeries. However, increasing rates of peri-implant diseases demand further examination of their pathogenesis. Polymicrobial biofilm formation on titanium surfaces has been considered the main risk factor for inflammatory processes on tissues surrounding implant devices, which often lead to implant failure. To overcome microbial accumulation on titanium surfaces biofilm targeting strategies have been developed to modify the surface and incorporate antimicrobial coatings. Because antibiotics are widely used to treat polymicrobial infections, these agents have recently started to be incorporated on titanium surface. This review discusses the biofilm formation on titanium dental implants and key factors to be considered in therapeutic and preventative strategies. Moreover, a systematic review was conducted on coatings developed for titanium surfaces using different antibiotics. This review will also shed light on potential alternative strategies aiming to reduce microbial loads and control polymicrobial infection on implanted devices.

Current trends and future prospects of chemical management of oral biofilms

Oral biofilm, a tribulation encountered on a general basis is known to associate and contribute to many oral and systemic diseases. Eradication of these biofilms is a primary step in treatment of the underlying malady. Management of a biofilm is governed by various factors: the microenvironment within a biofilm, bond between the adhered surface and the biofilm, location of the biofilm, access to the biofilm for removal. Though annihilation is the priority, the mode of approach to achieve the same is equally important, because biofilm's heterogenic nature and location govern the strategical treatment required. Literature supports that the consequences of oral biofilms is not restricted to its home ground, but disseminated to other systems of the body. This contemplates us to procure knowledge on its development, structure and progression to aim its eradication. Therefore, this review attempts to recognize the type of biofilm based on location and enumerate all the possible chemical modes of management for the specific type of oral biofilms encountered. In addition, to the traditional strategies prescribed or administered, newer approaches which are gaining popularity due to their ease and efficiency are also addressed. Frontiers in the above field, under investigation and promising in near future are also compiled. Thus, the present review aims to provide a comprehensive elucidation of chemical management of oral biofilms, both the conventional and novel approaches under investigation.

Evaluation of Antibacterial and Cytotoxic Properties of a Fluorinated Diamond-Like Carbon Coating for the Development of Antibacterial Medical Implants

Peri-implant infection is a serious complication in surgical procedures involving implants. We conducted an in vitro study to determine whether the use of a fluorinated diamond-like carbon (F-DLC) coating on a titanium alloy surface can prevent peri-implant infection. After applying the F-DLC, we evaluated its antibacterial and cytotoxic properties. The coating groups, containing controlled fluorine concentrations of 5.44%, 17.43%, 24.09%, and 30%, were examined for the presence of Staphylococcus aureus and Escherichia coli according to ISO 22196 for the measurement of antibacterial activity on plastics and other nonporous surfaces. Biological toxicity was evaluated using Chinese hamster V79 cells according to ISO 10993-5 for the biological evaluation of medical devices. In the control group, populations of S. aureus and E. coli substantially increased from 2.4 × 10⁴ to (1.45 ± 1.11) × 10⁶ colony-forming units (CFUs) and from 2.54 × 10⁴ to (4.04 ± 0.44) × 10⁶ CFUs, respectively. However, no bacteria colonies were detected in any F-DLC group with a fluorine concentration of ≥ 17.43%. In the biological toxicity study, an F-DLC coating with a fluorine concentration of 30% showed a colony formation rate of 105.8 ± 24.1%, which did not differ significantly from the colony formation rate of 107.5 ± 31.1% in the nontoxic control group. An F-DLC coating on titanium alloy discs showed excellent in vitro antibacterial activity with no biological toxicity.

Micrococcal-Nuclease-Triggered On-Demand Release of Vancomycin from Intramedullary Implant Coating Eradicates Staphylococcus aureus Infection in Mouse Femoral Canals

Preventing orthopedic implant-associated bacterial infections remains a critical challenge. Current practices of physically blending high-dose antibiotics with bone cements is known for cytotoxicity while covalently tethering antibiotics to implant surfaces is ineffective in eradicating bacteria from the periprosthetic tissue environment due to the short-range bactericidal actions, which are limited to the implant surface. Here, we covalently functionalize poly(ethylene glycol) dimethacrylate hydrogel coatings with vancomycin via an oligonucleotide linker sensitive to Staphylococcus aureus (S. aureus) micrococcal nuclease (MN) (PEGDMA-Oligo-Vanco). This design enables the timely release of vancomycin in the presence of S. aureus to kill the bacteria both on the implant surface and within the periprosthetic tissue environment. Ti6Al4V intramedullary (IM) pins surface-tethered with dopamine methacrylamide (DopaMA) and uniformly coated with PEGDMA-Oligo-Vanco effectively prevented periprosthetic infections in mouse femoral canals inoculated with bioluminescent S. aureus. Longitudinal bioluminescence monitoring, μCT quantification of femoral bone changes, end point quantification of implant surface bacteria, and histological detection of S. aureus in the periprosthetic tissue environment confirmed rapid and sustained bacterial clearance by the PEGDMA-Oligo-Vanco coating. The observed eradication of bacteria was in stark contrast with the significant bacterial colonization on implants and osteomyelitis development found in the absence of the MN-sensitive bactericidal coating. The effective vancomycin tethering dose presented in this on-demand release strategy was >200 times lower than the typical prophylactic antibiotic contents used in bone cements and may be applied to medical implants and bone/dental cements to prevent periprosthetic infections in high-risk clinical scenarios. This study also supports the timely bactericidal action by MN-triggered release of antibiotics as an effective prophylactic method to bypass the notoriously harder to treat periprosthetic biofilms and osteomyelitis.

Approaches based on passive and active antibacterial coating on titanium to achieve antibacterial activity

Titanium (Ti) and its alloys are widely applied as orthopedic implants for hip and knee prosthesis, fixation, and dental implants. However, Ti and its alloys are bioinert and susceptible to bacteria and biofilm formation. Strategies for improving the antibacterial properties of Ti can be divided into two approaches, namely, passive coating and active coating on the Ti surface. Passive coating on Ti mainly kills the bacteria in contact but does not kill plankton or bacteria dwell in the bone tissue around the Ti implant. Active coating mainly involves the release of antibacterial agents to kill the bacteria, but this may result in the development of bacterial resistance. Both strategies include advantages and disadvantages. This article reviews the current and potential future approaches for improving antibacterial activity on Ti. We mainly focus on current approaches for fabricating antibacterial Ti and its limitations and countermeasures, and provide direction for further studies of biofunctionalization of Ti with antibacterial properties. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A:2531-2539, 2018.

Is surface modification effective to prevent periprosthetic joint infection? A systematic review of preclinical and clinical studies

BACKGROUND

With increasing recognition of the importance of biofilm formation in the pathogenesis of periprosthetic joint infection (PJI), a push towards finding solutions to prevent PJI via surface modification of prostheses is occurring. Unlike the promising in vitro antimicrobial effects of these surface modifications, the preclinical and clinical prophylactic effects vary and are debated. Therefore, we performed this systematic review to answer: (1) what kinds of methods of surface modification are used in preclinical and clinical studies to prevent PJI, (2) whether these modifications are effective to prevent PJI.

METHODS

Electronic searches were performed using PubMed, Embase and the Cochrane library databases up to and including December 2017 with predetermined criteria: (1) in vivo studies with (2) surface modification for prophylactic effects against infection. Both animal studies and clinical trials were included. Data were extracted and presented systematically.

RESULTS

Overall, 21 studies were included. Among these, fourteen were carried out in animal models and seven were clinical studies. In the animal studies, six used antibiotics and six silver modifications, while copper and Cationic Steroidal Antimicrobial-13 were each used for one study. In the seven clinical studies targeting patients with high infection risk, five of them focused on silver-coated prostheses and the remaining two studied iodine-coated implants. In all of the animal studies, when compared with the control group, the surface modified groups had a lower infection risk (RR ranging from 0 to 0.71). Clinical studies using silver-coated prostheses also demonstrated a lower infection risk (RR ranging from 0.24 to 0.70), while iodine-coated implants showed a 0% and 5% incidence of PJI in the two case series included.

DISCUSSION

The results from the publications included in this review indicate that surface modification, especially antibiotic and silver modifications, are helpful preventing PJI in both preclinical animal models and in clinical trials.

LEVEL OF EVIDENCE

III, systematic review of level III retrospective comparative studies and level IV case series and animal experiments.

Significant Suppression of Staphylococcus aureus Colonization on Intramedullary Ti6Al4V Implants Surface-Grafted with Vancomycin-Bearing Polymer Brushes

Orthopedic implant-associated bacterial infection presents a major health threat due to tendency for periprosthetic bacterial colonization/biofilm formation that protects bacteria from host immune response and conventional antibiotic treatment. Using surface-initiated atom transfer radical polymerization and copper-catalyzed azide-alkyne cycloaddition (CuAAC), alkynylated vancomycin is conjugated to azido-functionalized side chains of polymethacrylates grafted from Ti6Al4V. High-efficiency CuAAC across the substrate is confirmed by complete surface conversion of azides by X-ray photoelectron spectroscopy (XPS) and elemental mapping of changing characteristic elements. The vancomycin-modified surface (Ti-pVAN) significantly reduces in vitro adhesion and colonization of Staphylococcus aureus (S. aureus), a main bacterial pathogen responsible for periprosthetic infection and osteomyelitis, compared to untreated Ti6Al4V, supporting retained antibacterial properties of the covalently conjugated antibiotics. When the surface-modified intramedullary Ti-pVAN pins are inserted into mouse femoral canals infected by bioluminescent Xen29 S. aureus, significantly reduced local bioluminescence along with mitigated blood markers for infection are detected compared to untreated Ti6Al4V pins over 21 days. Ti-pVAN pins retrieved after 21 days are confirmed with ∼20-fold reduction in adherent bacteria counts compared to untreated control, supporting the ability of surface-conjugated vancomycin in inhibiting periprosthetic S. aureus adhesion and colonization.

Temperature-Gating Titania Nanotubes Regulate Migration of Endothelial Cells

External stimuli-responsive biomaterials represent a type of promising candidates for addressing the complexity of biological systems. In this study, a platform based on the combination of temperature-sensitive polymers and a nanotube array was developed for loading sphingosine 1-phosphate (S1P) and regulating the migration of endothelial cells (ECs) at desired conditions. The localized release dosage of effectors could be controlled by the change of environmental temperature. At a culture temperature above the lower critical solution temperature, the polymer "gatekeeper" with a collapsed conformation allowed the release of S1P, which in turn enhanced the migration of ECs. The migration rate of single cells was significantly enhanced up to 58.5%, and the collective migration distance was also promoted to 25.1% at 24 h and 33.2% at 48 h. The cell morphology, focal adhesion, organization of cytoskeleton, and expression of genes and proteins related to migration were studied to unveil the intrinsic mechanisms. The cell mobility was regulated by the released S1P, which would bind with the S1PR1 receptor on the cell membrane and trigger the Rho GTPase pathway.

Comparison with the osteoconductivity and bone-bonding ability of the iodine supported titanium, titanium with porous oxide layer and the titanium alloy in the rabbit model

BACKGROUND

One of the serious postoperative complications associated with joint replacement is bacterial infection. In our recent investigations, iodine supported titanium implants demonstrated antibacterial activity in both in vitro and in vivo studies. The surfaces of the implants have porous anodic oxide layer with the antiseptic properties of iodine. According to the literature the titanium with porous anodic oxide have good osteoconductivity. But it is not clear whether the properties of iodine influence bone bonding of implants.

OBJECTIVES

The aim of this study is to evaluate the influence of the properties of iodine and porous anodic oxide layer in the bone bonding ability of titanium implants.

STUDY DESIGN & METHODS

Titanium rods were implanted in intramedullary rabbit femur models, in regard to the cementless hip stem. The implant rods were 5 mm in diameter and 25 mm in length. Three types of titanium rods were implanted.One was untreated titanium (control group (CL)), another was titanium with oxide layer without iodine (oxide layer group (OL)), and the other was Iodine treated Titanium (iodine group (ID)). The rods were inserted into the distal femur. We assessed the bonding strength by a measuring pull-out test at 4, 8, and 12 weeks after implantation. The bone-implant interfaces were evaluated at 4 weeks after implantation.

RESULTS

Pull-out test results of the ID implants were 202, 355, and 344 N, and those of the OL implants were 220, 310, 329 N at 4, 8, and 12 weeks, significantly higher than those of the CL implants (102, 216, and 227 N). But there were no significant difference in ID implants and OL implants. Histological examination revealed that new bone formed on the surface of each types of implants, but significantly more bone made direct contact with the surfaces of the ID implants and OL implants.

CONCLUSIONS

This research showed that new type of coating, iodine coated titanium has low toxicity and good osteoconductivity.

The Impact of Incorporating Antimicrobials into Implant Surfaces

With the increase in numbers of joint replacements, spinal surgeries, and dental implantations, there is an urgent need to combat implant-associated infection. In addition to stringent sterile techniques, an efficacious way to prevent this destructive complication is to create new implants with antimicrobial properties. Specifically, these implants must be active in the dental implant environment where the implant is bathed in the glycoprotein-rich salivary fluids that enhance bacterial adhesion, and propagation, and biofilm formation. However, in designing an antimicrobial surface, a balance must be struck between antimicrobial activity and the need for the implant to interact with the bone environment. Three types of surfaces have been designed to combat biofilm formation, while attempting to maintain osseous interactions: 1) structured surfaces where topography, usually at the nanoscale, decreases bacterial adhesion sufficiently to retard establishment of infection; 2) surfaces that actively elute antimicrobials to avert bacterial adhesion and promote killing; and 3) surfaces containing permanently bonded agents that generate antimicrobial surfaces that prevent long-term bacterial adhesion. Both topographical and elution surfaces exhibit varying, albeit limited, antimicrobial activity in vitro. With respect to covalent coupling, we present studies on the ability of the permanent antimicrobial surfaces to kill organisms while fostering osseointegration. All approaches have significant drawbacks with respect to stability and efficacy, but the permanent surfaces may have an edge in creating a long-term antibacterial environment.

The anti-bacterial activity of titanium-copper sintered alloy against Porphyromonas gingivalis in vitro

This study investigates the anti-bacterial property of Ti-Cu sintered alloys against Porphyromonas gingivalis. The anti-anaerobic property of Ti-Cu sintered alloys against P. gingivalis was investigated by antibacterial activity test, DNA measurement, DAPI staining and morphology observation. The antibacterial rates of the Ti-5Cu against P. gingivalis after 18 and 24 h incubation were 36.04 and 54.39%, and those of Ti-10Cu were 68.69 and 75.39%, which were lower than their anti-aerobic abilities. The concentration of P. gingivalis DNA gradually decreased with the increasing Cu content, which was nearly 50% after 24 h incubation on Ti-10Cu. SEM results showed that the shape of P. gingivalis changed and the bacteria broke apart with the addition of Cu and the extension of the culture time. Ti-Cu sintered alloys could not only kill anaerobic bacteria but also reduce the activity of the survived bacteria. The anti-anaerobic mechanism was thought to be in associated with the Cu ion released from Ti-Cu alloy.

Antibacterial and Biocompatible Titanium-Copper Oxide Coating May Be a Potential Strategy to Reduce Periprosthetic Infection: An In Vitro Study

BACKGROUND

Periprosthetic infections are devastating for patients and more efficacious preventive strategies are needed. Surface-modified implants using antibacterial coatings represent an option to cope with this problem; however, manufacturing limitations and cytotoxicity have curbed clinical translation. Among metals with antibacterial properties, copper has shown superior in vitro antibacterial performance while maintaining an acceptable cytotoxicity profile. A thin film containing copper could prevent early biofilm formation to limit periprosthetic infections. This pilot study presents the in vitro antibacterial effect, cytotoxicity, and copper ion elution pattern of a thin film of titanium-copper oxide (TiCuO).

QUESTIONS/PURPOSES

(1) Do titanium alloy (Ti6Al4V) discs coated with a thin film of TiCuO reduce Staphylococcus epidermidis biofilm and planktonic cell density compared with uncoated discs? (2) Do Ti6Al4V discs coated with a thin film of TiCuO affect normal human osteoblast viability compared with untreated cells? (3) Is copper ion concentration generated by coated discs lower than previously published copper ion concentrations that cause 50% toxicity in similar human cell lines in vitro (TC50)?

METHODS

Ninety Ti6Al4V discs (12.5 mm diameter; 1.25 mm thick) were used in this study. Seventy-two Ti6Al4V discs were coated with a thin film of either titanium oxide (TiO) or TiCuO containing 20%, 40%, or 80% copper using high-power impulse magnetron sputtering (HiPIMS). Eighteen Ti6Al4V discs remained uncoated for control purposes. We tested antibacterial properties of S epidermidis grown on discs in wells containing growth medium. After 24 hours, planktonic bacteria as well as biofilms removed by sonication were quantitatively cultured. Annexin/Pi staining was used to quantify in vitro normal human osteoblast cell viability at 24 hours and Day 7, respectively. Copper elution was measured at Days 1, 2, 3, 7, 14, and 28 using an inductively coupled plasma mass spectrometer to analyze aliquots of culture medium. Copper ion concentration achieved at 24 hours was compared with previously published TC50 for gingival fibroblast, a phenotypically similar cell line with available data regarding copper ion exposure.

RESULTS

Discs coated with TiCuO 80% copper showed greater biofilm and planktonic cell density reduction when compared with other tested compositions (analysis of variance [ANOVA]; p < 0.001). Discs coated with TiCuO 80% copper showed mean biofilm and planktonic cell density of 4.0 log₁₀ (SD = 0.4) and 5.7 log₁₀ (SD = 0.2). Discs coated with TiCuO 80% showed a mean difference in biofilm and planktonic cell density of 2.5 log₁₀ (95% confidence interval [CI], 1.9-3.1 log_10; p < 0.001) and 1.2 (95% CI, 0.6-1.8; p < 0.001), respectively, when compared with uncoated discs. Normal human osteoblast viability did not differ among all groups at 24 hours (ANOVA; p = 0.2) and Day 7 (ANOVA; p = 0.7). Discs coated with TiCuO 80% copper showed a mean difference (95% CI) in relative cell viability (%) at 24 hours and Day 7 of 31.1 (95% CI, -19.4 to 81.7; p = 0.4) and -5.0 (95% CI, -7.8 to 17.9; p = 0.9), respectively, when compared with untreated cells. For all TiCuO-coated discs, copper ion elution peaked at 24 hours and slowly decreased in a curvilinear fashion to nearly undetectable levels by Day 28. Discs coated with TiCuO 80% copper showed mean copper ion concentration at 24 hours of 269.4 µmol/L (SD = 25.2 µmol/L) and this concentration was lower than previously published TC50 for similar human cell lines at 24 hours (344 µmol/L, SEM = 44 µmol/L).

CONCLUSIONS

This pilot study demonstrates a proof of concept that a thin-film implant coating with TiCuO can provide a potent local antibacterial environment while remaining relatively nontoxic to a human osteoblast cell line. Further research in an animal model will be necessary to establish efficacy and safety of this technique and whether it might be useful in the design of implants.

CLINICAL RELEVANCE

A thin film coating with TiCuO demonstrates high antibacterial activity and low cellular cytotoxicity to human osteoblasts in vitro. Taken together, these properties represent a potential strategy for preventing periprosthetic infection if further work in animal models can confirm these results in vivo.

Covalent Immobilization of Enoxacin onto Titanium Implant Surfaces for Inhibiting Multiple Bacterial Species Infection and In Vivo Methicillin-Resistant Staphylococcus aureus Infection Prophylaxis

Infection is one of the most important causes of titanium implant failure in vivo A developing prophylactic method involves the immobilization of antibiotics, especially vancomycin, onto the surface of the titanium implant. However, these methods have a limited effect in curbing multiple bacterial infections due to antibiotic specificity. In the current study, enoxacin was covalently bound to an amine-functionalized Ti surface by use of a polyethylene glycol (PEG) spacer, and the bactericidal effectiveness was investigated in vitro and in vivo The titanium surface was amine functionalized with 3-aminopropyltriethoxysilane (APTES), through which PEG spacer molecules were covalently immobilized onto the titanium, and then the enoxacin was covalently bound to the PEG, which was confirmed by X-ray photoelectron spectrometry (XPS). A spread plate assay, confocal laser scanning microscopy (CLSM), and scanning electron microscopy (SEM) were used to characterize the antimicrobial activity. For the in vivo study, Ti implants were inoculated with methicillin-resistant Staphylococcus aureus (MRSA) and implanted into the femoral medullary cavity of rats. The degree of infection was assessed by radiography, micro-computed tomography, and determination of the counts of adherent bacteria 3 weeks after surgery. Our data demonstrate that the enoxacin-modified PEGylated Ti surface effectively prevented bacterial colonization without compromising cell viability, adhesion, or proliferation in vitro Furthermore, it prevented MRSA infection of the Ti implants in vivo Taken together, our results demonstrate that the use of enoxacin-modified Ti is a potential approach to the alleviation of infections of Ti implants by multiple bacterial species.

Comparative evaluation of MicroDTTect device and flocked swabs in the diagnosis of prosthetic and orthopaedic infections

The evolution of new prosthetic and osteosynthetic devices has led to more surgical indications, and this is accompanied by an increased incidence of septic complications in orthopaedic and trauma surgery in the general population. The strategy for choosing surgical or therapeutic (conservative) treatment is based on the identification of the pathogen: knowledge of the aetiological agents is an essential element in the decision-making process to ensure the most effective treatment is administered. The pathogen also needs to be considered in the challenging case of doubtful infection, where perhaps the only sign is inflammation, for a more accurate prediction of progression to either sepsis or healing. Biofilm-related infections and low-grade infections may fall into this category. Biofilm slows the metabolism of microorganisms and prolongs their survival, which renders them resistant to antibiotics. Moreover, when microorganisms are embedded in the biofilm they are poorly recognised by the immune system and the infection becomes chronic. As recently demonstrated, isolation and identification of bacteria in biofilm is difficult as the bacteria are concealed. The development of an effective means of sample collection and laboratory methods that can dislodge bacteria from prosthetic surfaces has therefore become necessary. The primary aim of the study was to evaluate the reliability of an innovative technology (MicroDTTect), specifically applied to collect and transport explanted samples (prostheses, osteosynthetic devices, biological tissues), and compare with flocked swabs. The MicroDTTect system is quick and simple to use and, most importantly, is a closed system that is totally sterile and safe for the patient being treated. It contains a specific concentration of dithiotreitol (DTT) that can dislodge bacteria from the biofilm adhering to prosthetic surfaces. The numbers of positive and negative samples were measured to compare the MicroDTTect methodology with swab collection in 30 procedures. The results showed that MicroDTTect had a higher sensitivity compared to swabs (77% and 46%, respectively), and was associated with more positive results than swabs (35% and 20%, respectively). These preliminary results show that MicroDTTect is superior to swab collection for bacterial identification in orthopaedic surgery. The early identification of microorganisms that cause sepsis may help improve treatment strategies and the efficacy of therapy, which will lead to an increased healing rate, reduced severity of sequelae and improved quality of life.

Evaluation of bone loss in antibacterial coated dental implants: An experimental study in dogs

The aim of this study was to evaluate the in vivo effect of antibacterial modified dental implants in the first stages of peri-implantitis. Thirty dental implants were inserted in the mandibular premolar sites of 5 beagle dogs. Sites were randomly assigned to Ti (untreated implants, 10units), Ti_Ag (silver electrodeposition treatment, 10units), and Ti_TSP (silanization treatment, 10units). Coated implants were characterized by scanning electron microscopy, interferometry and X-ray photoelectron spectroscopy. Two months after implant insertion, experimental peri-implantitis was initiated by ligature placement. Ligatures were removed 2months later, and plaque formation was allowed for 2 additional months. Clinical and radiographic analyses were performed during the study. Implant-tissue samples were prepared for micro computed tomography, backscattered scanning electron microscopy, histomorphometric and histological analyses and ion release measurements. X-ray, SEM and histology images showed that vertical bone resorption in treated implants was lower than in the control group (P<0.05). This effect is likely due to the capacity of the treatments to reduce bacteria colonization on the implant surface. Histological analysis suggested an increase of peri-implant bone formation on silanized implants. However, the short post-ligature period was not enough to detect differences in clinical parameters among implant groups. Within the limits of this study, antibacterial surface treatments have a positive effect against bone resorption induced by peri-implantitis.

Cytotoxicity of a new antimicrobial coating for surgical screws: an in vivo study

INTRODUCTION

The risk of surgery-related infection is a persistent problem in orthopaedics and infections involving implants are particularly difficult to treat. This study explored the responses of bone and soft tissue to antimicrobial-coated screws. We investigated whether such screws, which have never been used to fix bony tissues, would result in a cytotoxic effect. We hypothesised that the coated screws would not be toxic to the bone and that the likelihood of infection would be reduced since bacteria are not able to grow on these screws.

METHODS

Titanium screws were inserted into the left supracondylar femoral regions of 16 rabbits. The screws were either uncoated (control group, n = 8) or coated with a polyvinylpyrrolidone-polyurethane interpolymer with tertiary amine functional groups (experimental group, n = 8). At Week 6, histological samples were obtained and examined. The presence of necrosis, fibrosis and inflammation in the bony tissue and the tissue surrounding the screws was recorded.

RESULTS

Live, cellular bone marrow was present in all the rabbits from the experimental group, but was replaced with connective tissue in four rabbits from the control group. Eight rabbits from the control group and two rabbits from the experimental group had necrosis in fatty bone marrow. Inflammation was observed in one rabbit from the experimental group and five rabbits from the control group.

CONCLUSION

Titanium surgical screws coated with polyvinylpyrrolidone-polyurethane interpolymer were associated with less necrosis than standard uncoated screws. The coated screws were also not associated with any cytotoxic side effect.

Animal Models of Implant-Related Low-Grade Infections. A Twenty-Year Review

The demand for joint replacement and surgical treatment is continuously increasing, thus representing a clinical burden and a cost for the healthcare system. Among several pathogens involved in implant-related infections, staphylococci account for the two-thirds of clinically isolated bacteria. Despite most of them are highly virulent microorganisms (Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa), low virulent bacteria (Staphylococcus epidermidis, Propionibacterium acnes) are responsible for delayed, low-grade infections without specific clinical signs and hardly distinguishable from aseptic prosthetic failure. Therefore, there is a real need to study the pathogenesis of orthopedic infections through in vivo animal models. The present review of the literature provides a 20-year overview of animal models of acute, subclinical or chronic orthopedic infections according to the pathogen virulence and inocula. Through this analysis, a great variety of conditions in terms of bacterial strains and inocula emerged, thus encouraging the development of more reproducible in vivo studies to provide relevant information for a translational approach to humans.

Critical analysis of experimental models of periprosthetic joint infection

INTRODUCTION

Because the extreme diversity of clinical situations makes formal clinical trials difficult to carry out, animal models of periprosthetic infection in orthopaedics are needed to understand the aetiology and pathology of these infections, and to test new treatment methods. These experimental models must reproduce the features of the infections encountered in clinical practice. One of the model variables is the method of inoculation: local (intra-articular), intravenous or intra-arterial. Another is the timing of the inoculation: intra-operative or postoperative. Together, these options simulate the different contamination methods: direct, by proximity or blood-borne. However, the chosen inoculation route can also affect the infection rate and severity in the various models, and in some cases do not accurately reproduce the postoperative infections encountered clinically.

HYPOTHESIS

The direct inoculation method is the most effective for inducing a local infection on a foreign body in a joint, and the least iatrogenic.

METHODS

A critical analysis of published studies was carried out to evaluate each model against three endpoints, according to the type of inoculation. The primary endpoint was the infection rate, which should be as close as possible to 100%. The secondary endpoints were the mortality rate and rate of spontaneous healing, both of which should be as low as possible. Twenty-one articles were reviewed.

RESULTS

Intra-articular and intra-medullary inoculations had induction rates between 70 and 100%; intra-arterial inoculations had an induction rate of 100%, while intravenous inoculation had a rate of 47 to 77%. The mortality rates were lower with the intra-articular and intramedullary inoculations (5 to 23%) than for the intra-arterial inoculations (37%) and intravenous inoculations (28 to 56%). The spontaneous healing rate was 0 to 30% for intra-articular and intramedullary inoculations, 30 to 53% for intravenous inoculations and 0% for intra-arterial inoculations.

CONCLUSION

Direct inoculation methods are most effective at reproducing chronic periprosthetic joints infections, without putting the animal's life at risk or allowing for spontaneous healing. The simulation of blood-borne infections is more random.

Tetracycline tethered to titanium inhibits colonization by Gram-negative bacteria

As peri-prosthetic infection is one of the most devastating complications associated with implant placement, we have reasoned that such infection can be largely subverted by development of antibacterial implants. Our previous work demonstrated that covalent coupling of vancomycin to titanium alloy prevented colonization by the Gram-positive pathogens, Staphylococcus aureus and Staphylococcus epidermidis. Some orthopedic devices, including permanent prosthesis anchors, and most dental implants are transcutaneous or transmucosal and can be prone to colonization by Gram-negative pathogens. We report here the successful covalent coupling of the broad-spectrum antibiotic, tetracycline (TET), to titanium surfaces (Ti-TET) to retard Gram-negative colonization. Synthetic progress was followed by changes in water contact angle, while the presence of TET was confirmed by immunofluorescence. Ti-TET actively prevented colonization in the presence of bathing Escherichia coli, both by fluorescence microscopy and direct counting. Finally, the Ti-TET surface supported osteoblastic cell adhesion and proliferation over a 72-h period. Thus, this new surface offers a powerful means to protect transcutaneous implants from adhesion of Gram-negative pathogens, decreasing the need for replacement of this hardware.

Effect of surface treatments on the surface morphology, corrosion property, and antibacterial property of Ti-10Cu sintered alloy

Ti-10Cu sintered alloy has shown strong antibacterial properties against S. aureus and E. coli and good cell biocompatibility in vitro and in vivo, displaying potential application as an implant material. Surface treatments are always applied to implants to improve the surface biocompatibility. In this paper, several typically used surface treatments, including sandblasting (SB), sandblasted and large-grits acid etching (SLA), and alkaline heat treatment (AH) were chosen to modify the Ti-10Cu. A cp-Ti (commercially pure titanium) sample was used as control sample. The effect of surface treatments on the corrosion properties and antibacterial properties of the Ti-10Cu sintered alloy was investigated. After SB and SLA treatments, a rough surface with a TiO2 layer was formed on the surface, which reduced the corrosion resistance and enhanced the Ti and Cu ion release. After AH treatment, a smooth but microporous surface with a TiO2/titanate layer was formed, which improved slightly the corrosion resistance. However, the Cu ion and Ti ion release from the Ti-10Cu sample was promoted by AH treatment due to the fact that more Ti2Cu phases were exposed on the AH-treated Ti-10Cu sample. It was demonstrated that the Ti-10Cu samples after surface treatments still exhibited good antibacterial properties against S. aureus, which indicated that the surface treatment did not reduce the antibacterial activity. The control mechanism was thought to be related to the high Cu ion release even after surface treatments. It was expected that the surface treatments provided Ti-10Cu sintered alloy with good surface bioactivity without reduction in antibacterial activity.

Novel Antibiotic-loaded Point-of-care Implant Coating Inhibits Biofilm

BACKGROUND

Orthopaedic biomaterials are susceptible to biofilm formation. A novel lipid-based material has been developed that may be loaded with antibiotics and applied as an implant coating at point of care. However, this material has not been evaluated for antibiotic elution, biofilm inhibition, or in vivo efficacy.

QUESTIONS/PURPOSES

(1) Do antibiotic-loaded coatings inhibit biofilm formation? (2) Is the coating effective in preventing biofilm in vivo?

METHODS

Purified phosphatidylcholine was mixed with 25% amikacin or vancomycin or a combination of 12.5% of both. A 7-day elution study for coated titanium and stainless steel coupons was followed by turbidity and zone of inhibition assays against Staphylococcus aureus and Pseudomonas aeruginosa. Coupons were inoculated with bacteria and incubated 24 hours (N = 4 for each test group). Microscopic images of biofilm were obtained. After washing and vortexing, attached bacteria were counted. A mouse biofilm model was modified to include coated and uncoated stainless steel wires inserted into the lumens of catheters inoculated with a mixture of S aureus or P aeruginosa. Colony-forming unit counts (N = 10) and scanning electron microscopy imaging of implants were used to determine antimicrobial activity.

RESULTS

Active antibiotics with colony inhibition effects were eluted for up to 6 days. Antibiotic-loaded coatings inhibited biofilm formation on in vitro coupons (log-fold reductions of 4.3 ± 0.4 in S aureus and 3.1 ± 0 for P aeruginosa in phosphatidylcholine-only coatings, 5.6 ± 0 for S aureus and 3.1 ± 0 for P aeruginosa for combination-loaded coatings, 5.5 ± 0.3 for S aureus in vancomycin-loaded coatings, and 3.1 ± 0 for P aeruginosa for amikacin-loaded coatings (p < 0.001 for all comparisons of antibiotic-loaded coatings against uncoated controls for both bacterial strains, p < 0.001 for comparison of antibiotic-loaded coatings against phosphatidylcholine only for S aureus, p = 0.54 for comparison of vancomycin versus combination coating in S aureus, P = 0.99 for comparison of antibiotic- and unloaded phosphatidylcholine coatings in P aeruginosa). Similarly, antibiotic-loaded coatings reduced attachment of bacteria to wires in vivo (log-fold reduction of 2.54 ± 0; p < 0.001 for S aureus and 0.83 ± 0.3; p = 0.112 for P aeruginosa).

CONCLUSIONS

Coatings deliver active antibiotics locally to inhibit biofilm formation and bacterial growth in vivo. Future evaluations will include orthopaedic preclinical models to confirm therapeutic efficacy.

CLINICAL RELEVANCE

Clinical applications of local drug delivery coating could reduce the rate of implant-associated infections.

Implantable biomaterial based on click chemistry for targeting small molecules

Specific and targeted delivery of medical therapies continues to be a challenge for the optimal treatment of multiple medical conditions. Technological advances permit physicians to target most sites of the body. However, after the intervention, physicians rely on systemic medications that need frequent dosing and may have noxious side effects. A novel system combining the temporal flexibility of systemic drug delivery and the spatial control of injectable biomaterials would improve the spatiotemporal control of medical therapies. Here we present an implantable biomaterial that harnesses in vivo click chemistry to enhance the delivery of suitable small molecules by an order of magnitude. The results demonstrate a simple and modular method to modify a biomaterial with small molecules in vitro and present an example of a polysaccharide modified hours after in vivo implantation. This approach provides the ability to precisely control the moment when biochemical and/or physical signals may appear in an implanted biomaterial. This is the first step towards the construction of a biomaterial that enhances the spatial location of systemic small molecules via in vivo chemical delivery.

Antimicrobial GL13K peptide coatings killed and ruptured the wall of Streptococcus gordonii and prevented formation and growth of biofilms

Infection is one of the most prevalent causes for dental implant failure. We have developed a novel antimicrobial peptide coating on titanium by immobilizing the antimicrobial peptide GL13K. GL13K was developed from the human salivary protein BPIFA2. The peptide exhibited MIC of 8 µg/ml against planktonic Pseudonomas aeruginosa and their biofilms were reduced by three orders of magnitude with 100 µg/ml GL13K. This peptide concentration also killed 100% of Streptococcus gordonii. At 1 mg/ml, GL13K caused less than 10% lysis of human red blood cells, suggesting low toxicity to mammalian cells. Our GL13K coating has also previously showed bactericidal effect and inhibition of biofilm growth against peri-implantitis related pathogens, such as Porphyromonas gingivalis. The GL13K coating was cytocompatible with human fibroblasts and osteoblasts. However, the bioactivity of antimicrobial coatings has been commonly tested under (quasi)static culture conditions that are far from simulating conditions for biofilm formation and growth in the oral cavity. Oral salivary flow over a coating is persistent, applies continuous shear forces, and supplies sustained nutrition to bacteria. This accelerates bacteria metabolism and biofilm growth. In this work, the antimicrobial effect of the coating was tested against Streptococcus gordonii, a primary colonizer that provides attachment for the biofilm accretion by P. gingivalis, using a drip-flow biofilm bioreactor with media flow rates simulating salivary flow. The GL13K peptide coatings killed bacteria and prevented formation and growth of S. gordonii biofilms in the drip-flow bioreactor and under regular mild-agitation conditions. Surprisingly the interaction of the bacteria with the GL13K peptide coatings ruptured the cell wall at their septum or polar areas leaving empty shell-like structures or exposed protoplasts. The cell wall rupture was not detected under regular culture conditions, suggesting that cell wall rupture induced by GL13K peptides also requires media flow and possible attendant biological sequelae of the conditions in the bioreactor.

Bioactive coatings for orthopaedic implants-recent trends in development of implant coatings

Joint replacement is a major orthopaedic procedure used to treat joint osteoarthritis. Aseptic loosening and infection are the two most significant causes of prosthetic implant failure. The ideal implant should be able to promote osteointegration, deter bacterial adhesion and minimize prosthetic infection. Recent developments in material science and cell biology have seen the development of new orthopaedic implant coatings to address these issues. Coatings consisting of bioceramics, extracellular matrix proteins, biological peptides or growth factors impart bioactivity and biocompatibility to the metallic surface of conventional orthopaedic prosthesis that promote bone ingrowth and differentiation of stem cells into osteoblasts leading to enhanced osteointegration of the implant. Furthermore, coatings such as silver, nitric oxide, antibiotics, antiseptics and antimicrobial peptides with anti-microbial properties have also been developed, which show promise in reducing bacterial adhesion and prosthetic infections. This review summarizes some of the recent developments in coatings for orthopaedic implants.

Co-immobilization of active antibiotics and cell adhesion peptides on calcium based biomaterials

Two bioactive molecules with unrelated functions, vancomycin and a cell adhesion peptide, were immobilized on the surface of a potential bone scaffold material, calcium aluminum oxide. In order to accomplish immobilization and retain bioactivity three sequential surface functionalization strategies were compared: 1.) vancomycin was chemically immobilized before a cell adhesion peptide (KRSR), 2.) vancomycin was chemically immobilized after KRSR and 3.) vancomycin was adsorbed after binding the cell adhesion peptide. Both molecules remained on the surface and active using all three reaction sequences and after autoclave sterilization based on osteoblast attachment, bacterial turbidity and bacterial zone inhibition test results. However, the second strategy was superior at enhancing osteoblast attachment and significantly decreasing bacterial growth when compared to the other sequences.

A systematic review of animal models for Staphylococcus aureus osteomyelitis

Staphylococcus aureus (S. aureus) osteomyelitis is a significant complication for orthopaedic patients undergoing surgery, particularly with fracture fixation and arthroplasty. Given the difficulty in studying S. aureus infections in human subjects, animal models serve an integral role in exploring the pathogenesis of osteomyelitis, and aid in determining the efficacy of prophylactic and therapeutic treatments. Animal models should mimic the clinical scenarios seen in patients as closely as possible to permit the experimental results to be translated to the corresponding clinical care. To help understand existing animal models of S. aureus, we conducted a systematic search of PubMed and Ovid MEDLINE to identify in vivo animal experiments that have investigated the management of S. aureus osteomyelitis in the context of fractures and metallic implants. In this review, experimental studies are categorised by animal species and are further classified by the setting of the infection. Study methods are summarised and the relevant advantages and disadvantages of each species and model are discussed. While no ideal animal model exists, the understanding of a model's strengths and limitations should assist clinicians and researchers to appropriately select an animal model to translate the conclusions to the clinical setting.

Diabetic mouse model of orthopaedic implant-related Staphylococcus aureus infection

Background

Periprosthetic bacterial infections represent one of the most challenging orthopaedic complications that often require implant removal and surgical debridement and carry high social and economical costs. Diabetes is one of the most relevant risk factors of implant-related infection and its clinical occurrence is growing worldwide. The aim of the present study was to test a model of implant-related infection in the diabetic mouse, with a view to allow further investigation on the relative efficacy of prevention and treatment options in diabetic and non-diabetic individuals.

Methodology

A cohort of diabetic NOD/ShiLtJ mice was compared with non-diabetic CD1 mice as an in vivo model of S. aureus orthopaedic infection of bone and soft tissues after femur intramedullary pin implantation. We tested control and infected groups with 1×10³ colony-forming units of S. aureus ATCC 25923 strain injected in the implant site. At 4 weeks post-inoculation, host response to infection, microbial biofilm formation, and bone damage were assessed by traditional diagnostic parameters (bacterial culture, C-reactive protein and white blood cell count), histological analysis and imaging techniques (micro computed tomography and scanning electron microscopy).

Results

Unlike the controls and the CD1 mice, all the diabetic mice challenged with a single inoculum of S. aureus displayed severe osteomyelitic changes around the implant.

Conclusions

Our findings demonstrate for the first time that the diabetic mouse can be successfully used in a model of orthopaedic implant-related infection. Furthermore, the same bacteria inoculum induced periprosthetic infection in all the diabetic mice but not in the controls. This animal model of implant-related infection in diabetes may be a useful tool to test in vivo treatments in diabetic and non-diabetic individuals.

Immobilized antibiotics to prevent orthopaedic implant infections

Many surgical procedures require the placement of an inert or tissue-derived implant deep within the body cavity. While the majority of these implants do not become colonized by bacteria, a small percentage develops a biofilm layer that harbors invasive microorganisms. In orthopaedic surgery, unresolved periprosthetic infections can lead to implant loosening, arthrodeses, amputations and sometimes death. The focus of this review is to describe development of an implant in which an antibiotic tethered to the metal surface is used to prevent bacterial colonization and biofilm formation. Building on well-established chemical syntheses, studies show that antibiotics can be linked to titanium through a self-assembled monolayer of siloxy amines. The stable metal-antibiotic construct resists bacterial colonization and biofilm formation while remaining amenable to osteoblastic cell adhesion and maturation. In an animal model, the antibiotic modified implant resists challenges by bacteria that are commonly present in periprosthetic infections. While the long-term efficacy and stability is still to be established, ongoing studies support the view that this novel type of bioactive surface has a real potential to mitigate or prevent the devastating consequences of orthopaedic infection.

Identification and treatment of infected total hip arthroplasty

Periprosthetic joint infection (PJI) in the hip following prosthetic joint placement is a devastating outcome of an otherwise often successful surgical treatment (total-hip arthroplasty). Management of PJI is dependent upon accurate diagnosis and successful treatment, both of which are challenging. Recently, great strides have been made in improving the diagnosis of PJI, which has no 'gold standard' diagnostic tool. Proper diagnosis is essential as untreated or undetected PJI can quickly lead to biofilm formation on the implant surface depending upon the infecting organism. Upon complete biofilm formation, successful treatment requires prosthetic resection with immediate or delayed reimplantation. Even with the most aggressive surgical treatment, PJI eradication currently has a success rate of approximately 80%. Unfortunately, technologies to improve the local delivery of antibiotics are not expected to be available in the near future.

Vancomycin-modified implant surface inhibits biofilm formation and supports bone-healing in an infected osteotomy model in sheep: a proof-of-concept study

BACKGROUND

Implant-associated infections contribute to patient morbidity and health care costs. We hypothesized that surface modification of titanium fracture hardware with vancomycin would support bone-healing and prevent bacterial colonization of the implant in a large-animal model.

METHODS

A unilateral transverse mid-diaphyseal tibial osteotomy was performed and repaired with a titanium locking compression plate in nine sheep. Four control animals were treated with an unmodified plate and five experimental animals were treated with a vancomycin-modified plate. The osteotomy was inoculated with 2.5 × 106 colony-forming units of Staphylococcus aureus. The animals were killed at three months postoperatively, and implants were retrieved aseptically. Microbiologic and histologic analyses, scanning electron and confocal microscopy, and microcomputed tomography were performed.

RESULTS

All animals completed the study. Compared with the treatment cohort, control animals exhibited protracted lameness in the operatively treated leg. Gross findings during necropsy were consistent with an infected osteotomy accompanied by a florid and lytic callus. Microcomputed tomography and histologic analysis of the tibiae further supported the presence of septic osteomyelitis in the control cohort. Thick biofilms were also evident, and bacterial cultures were positive for Staphylococcus aureus in three of four control animals. In contrast, animals treated with vancomycin-treated plates exhibited a healed osteotomy site with homogenous remodeling, there was no evidence of biofilm formation on the retrieved plate, and bacterial cultures from only one of five animals were positive for Staphylococcus aureus.

CONCLUSIONS

Vancomycin-derivatized plate surfaces inhibited implant colonization with Staphylococcus aureus and supported bone-healing in an infected large-animal model.

Molecular engineering of an orthopaedic implant: from bench to bedside

The use of metallic implants has revolutionised the practice of orthopaedic surgery. While the safety and biocompatibility of these devices are excellent, a small percentage becomes infected. These infections are due to the formation of a biofilm that harbours bacteria encased in a complex extracellular matrix. The matrix serves as a barrier to immune surveillance as well as limiting the biocidal effects of systemic and local antibiotics. The objective of the review is to describe a novel approach to controlling implant infection using an antibiotic that is linked to titanium through a self-assembled monolayer of siloxy amines. We show that the hybrid-engineered surface is stable, biocompatible and resists colonisation by bacterial species most commonly associated with implant-related infections. Studies with rodent bone infection models suggest that the engineered titanium surface prevents bone infection. Results of a very recent investigation utilising a sheep model of infection indicate that the titanium-tethered antibiotic controls infection without compromising bone formation and remodelling. From all of these perspectives, the tethered antibiotic holds promise of providing a novel and practical approach to reducing implant-associated infections.

Hydrophobic polycationic coatings that inhibit biofilms and support bone healing during infection

Adhesion of microorganisms to biomaterials with subsequent formation of biofilms on such foreign bodies as orthopedic trauma hardware is a critical factor in implant-associated infections; once a biofilm has been established, its microorganisms become recalcitrant to the host's immune surveillance and markedly resistant to drugs. We have previously reported that painting with the hydrophobic polycation N,N-dodecyl,methyl-PEI (PEI = polyethylenimine) renders solid surfaces bactericidal in vitro. Herein we observe that N,N-dodecyl,methyl-PEI-derivatized titanium and stainless steel surfaces resist biofilm formation by Staphylococcus aureus compared to the untreated ones. Using imaging, microbiology-, histopathology-, and scanning electron microscopy (SEM) experiments in a clinically relevant large-animal (sheep) trauma model, we subsequently demonstrate in vivo that orthopedic fracture hardware painted with N,N-dodecyl,methyl-PEI not only prevents implant colonization with biofilm but also promotes bone healing. Functionalizing orthopedic hardware with hydrophobic polycations thus holds promise in supporting bone healing in the presence of infection in veterinary and human orthopedic patients.

Infection, inflammation, and bone regeneration: a paradoxical relationship

Various strategies have been developed to promote bone regeneration in the craniofacial region. Most of these interventions utilize implantable materials or devices. Infections resulting from colonization of these implants may result in local tissue destruction in a manner analogous to periodontitis. This destruction is mediated via the expression of various inflammatory mediators and tissue-destructive enzymes. Given the well-documented association among microbial biofilms, inflammatory mediators, and tissue destruction, it seems reasonable to assume that inflammation may interfere with bone healing and regeneration. Paradoxically, recent evidence also suggests that the presence of certain pro-inflammatory mediators is actually required for bone healing. Bone injury (e.g., subsequent to a fracture or surgical intervention) is followed by a choreographed cascade of events, some of which are dependent upon the presence of pro-inflammatory mediators. If inflammation resolves promptly, then proper bone healing may occur. However, if inflammation persists (which might occur in the presence of an infected implant or graft material), then the continued inflammatory response may result in suboptimal bone formation. Thus, the effect of a given mediator is dependent upon the temporal context in which it is expressed. Better understanding of this temporal sequence may be used to optimize regenerative outcomes.

Osteoconductivity of thermal-sprayed silver-containing hydroxyapatite coating in the rat tibia

A silver-containing hydroxyapatite (Ag-HA) coating has been developed using thermal spraying technology. We evaluated the osteoconductivity of this coating on titanium (Ti) implants in rat tibiae in relation to bacterial infection in joint replacement.

At 12 weeks, the mean affinity indices of bone formation of a Ti, an HA, a 3%Ag-HA and a 50%Ag-HA coating were 97.3%, 84.9%, 81.0% and 40.5%, respectively. The mean affinity indices of bone contact of these four coatings were 18.8%, 83.7%, 77.2% and 40.5%, respectively. The indices of bone formation and bone contact around the implant of the 3%Ag-HA coating were similar to those of the HA coating, and no significant differences were found between them (bone formation, p = 0.99; bone contact, p = 0.957). However, inhibition of bone formation was observed with the 50%Ag-HA coating.

These results indicate that the 3%Ag-HA coating has low toxicity and good osteoconductivity, and that the effect of silver toxicity on osteoconductivity depends on the dose.

Self-protecting bactericidal titanium alloy surface formed by covalent bonding of daptomycin bisphosphonates

Infections are a devastating complication of titanium alloy orthopedic implants. Current therapy includes antibiotic-impregnated bone cement and antibiotic-containing coatings. We hypothesized that daptomycin, a Gram-positive peptide antibiotic, could prevent bacterial colonization on titanium alloy surfaces if covalently bonded via a flexible, hydrophilic spacer. We designed and synthesized a series of daptomycin conjugates for bonding to the surface of 1.0 cm² Ti6Al4V foils through bisphosphonate groups, reaching a maximum yield of 180 pmol/cm². Daptomycin-bonded foils killed 53 ± 5% of a high challenge dose of 3 × 10⁵ cfu Staphylococcus aureus ATCC 29213.

A mouse model of post-arthroplasty Staphylococcus aureus joint infection to evaluate in vivo the efficacy of antimicrobial implant coatings

BACKGROUND

Post-arthroplasty infections represent a devastating complication of total joint replacement surgery, resulting in multiple reoperations, prolonged antibiotic use, extended disability and worse clinical outcomes. As the number of arthroplasties in the U.S. will exceed 3.8 million surgeries per year by 2030, the number of post-arthroplasty infections is projected to increase to over 266,000 infections annually. The treatment of these infections will exhaust healthcare resources and dramatically increase medical costs.

METHODOLOGY/PRINCIPAL FINDINGS

To evaluate novel preventative therapeutic strategies against post-arthroplasty infections, a mouse model was developed in which a bioluminescent Staphylococcus aureus strain was inoculated into a knee joint containing an orthopaedic implant and advanced in vivo imaging was used to measure the bacterial burden in real-time. Mice inoculated with 5x10(3) and 5x10(4) CFUs developed increased bacterial counts with marked swelling of the affected leg, consistent with an acute joint infection. In contrast, mice inoculated with 5x10(2) CFUs developed a low-grade infection, resembling a more chronic infection. Ex vivo bacterial counts highly correlated with in vivo bioluminescence signals and EGFP-neutrophil fluorescence of LysEGFP mice was used to measure the infection-induced inflammation. Furthermore, biofilm formation on the implants was visualized at 7 and 14 postoperative days by variable-pressure scanning electron microscopy (VP-SEM). Using this model, a minocycline/rifampin-impregnated bioresorbable polymer implant coating was effective in reducing the infection, decreasing inflammation and preventing biofilm formation.

CONCLUSIONS/SIGNIFICANCE

Taken together, this mouse model may represent an alternative pre-clinical screening tool to evaluate novel in vivo therapeutic strategies before studies in larger animals and in human subjects. Furthermore, the antibiotic-polymer implant coating evaluated in this study was clinically effective, suggesting the potential for this strategy as a therapeutic intervention to combat post-arthroplasty infections.

Antibiotic modification of native grafts: improving upon nature's scaffolds

Infection associated with inert implants is complicated by bacterial biofilm formation that renders the infection antibiotic insensitive. The goal of this investigation was to synthesize and characterize a vancomycin (VAN)-modified bone allograft that could render the tissue inhospitable to bacterial colonization and the establishment of infection. We found that the numbers of primary amines, which could serve as anchors for chemical synthesis, increased with limited demineralization. Using these amines, we coupled two linkers and VAN to bone using Fmoc chemistry. By immunohistochemistry, VAN was abundant on the surface of the allograft; based on elution and measurement of bound antibody, this coupling yielded at least approximately 26 ng VAN/mg bone. The coupled VAN appeared to be permanently bound to the allograft, as it showed no elution in a disk diffusion assay, and, importantly, resisted colonization by Staphylococcus aureus challenges. We suggest that this chimeric construct represents a new generation of antibiotic-modified allografts that provide antibacterial properties.