A biomechanical comparison of one-third tubular plates versus periarticular plates for fixation of osteoporotic distal fibula fractures

Full weight bearing after internal fixation of isolated distal fibular fractures with anatomically contoured locking plates: Our institutional experience

Isolated fractures of the distal fibula mainly affect young, active people. In most cases, fixation is by open reduction with or without casting for six weeks without weight bearing. The current trend is to reduce this period of non-weight-bearing in order to promote earlier functional rehabilitation. The improved mechanical stability resulting from the use of plates with locking screws has changed the postoperative management of many fractures, but there is little evidence for the ankle. Between October 2013 and August 2015, 36 patients were enrolled in a prospective study to evaluate the performance of internal fixation of isolated distal fibular fractures using a lateral anatomically contoured titanium locking plate (InitialA® plate from Newclip Technics, Haute Goulaine, France) with immediate mobilisation and full weight bearing. No patient required further surgery due to mechanical failure or non-union. The bone healing rate was 100 % at 3 months. Two patients had septic complications requiring plate removal and antibiotic treatment and were eventually cured. The use of anatomically contoured locking plates provides strong and stable fixation, allowing immediate full weight-bearing. Such a technique has the advantage of a short recovery time and an early return to work without additional complications.

Use of locking fibular plates versus non-locking dual plate fixation: A biomechanical study

Introduction

Distal fibula osteoporotic comminuted fractures are challenging to treat and are often treated with periarticular locking plates. This study examined the biomechanical difference between locked plating and dual non-locked one-third tubular plating.

Methods

Using an osteoporotic Sawbones fibula model, simulated fracture were fixated with one-third tubular dual plating and locked periarticular plating. The samples were then torqued to failure and peak torque, stiffness, and displacement were recorded.

Results

The peak torque of the dual plating group was found to be statistically higher than the periarticular locked plating group (0.841 Nm and 0.740 Nm respectively; p = 0.024). However overall stiffness calculated at each 10° increment of displacement was noted to have no significant difference between the two constructs.

Conclusion

Dual non-locked plating of distal fibula osteoporotic comminuted fractures is biomechanically equivalent to locked periarticular plating.

Management of non-unions of the malleolar fractures- Current Evidence

Although malleolar non-union is uncommon, it is associated with significant morbidity. Managing this problem requires understanding ankle fracture biomechanics and bone healing. We present in this article the pertinent points to be considered in evaluating and managing patients with malleolar non-union. Our discussion will focus on the important risk factors contributing to this problem, and the need to carefully consider the biomechanical stability and the biological environment to ensure successful bony unions.

Management of High-Risk Ankle Fractures

Successful outcomes in the surgical treatment of the fractured ankle require methods that respect the soft tissue envelope and establish a stable mortise for functional rehabilitation. Ankle fractures in patients with osteopenia and in diabetic patients with deranged bone remodeling constitute high-risk injuries that may result in catastrophic complications. These patients present unique care challenges and should not be approached in the same manner as their healthy counterparts. We present the principles of treatment in high-risk ankle fractures, operative treatment philosophy illustrating techniques frequently used at our institution, and a review of current literature.

A comparison of outcomes of locking versus non-locking plate fixation for the distal fibula fractures: a systematic review and meta-analysis

PURPOSE

A locking plate (LP) or non-locking plate (NLP) can be used for distal fibula fracture fixation. However, the advantages of LP over NLP in patients with distal fibula fractures are not clear. In terms of indications, the role of the two plates probably differs; however, to draw comparative conclusions, we conceptualized this systematic review and meta-analysis of studies that directly compared the two plates, wherein both groups' indications and baseline parameters were similar.

METHODS

An electronic literature search was performed using PubMed/Medline, Embase, Scopus, and Cochrane Library databases for studies comparing the LP versus NLP fixation for the lateral malleolus fracture. A total of 18 studies were included in qualitative and quantitative analysis. A subgroup analysis was performed for patients aged < 55 years and patients aged > 55 years. The statistical analysis was performed by Review Manager Software version 5.4.1.

RESULTS

A meta-analysis of 4243 fractures was performed across 18 studies. The rate of fracture union and overall complication rates did not differ between the two fixation groups with an OR of 0.71 (95% CI 0.26, 1.96, p = 0.51 and 1.11 (95% CI 0.84, 1.47, p = 0.47, respectively. There is no difference in the reoperation rate due to minor or major complications between the two groups. There was no difference in functional outcome (MD -0.85, with 95% CI -5.63, 3.93, p = 0.73), but NLP has a shorter surgical duration (MD 3.0, with 95% CI 0.26, 5.75, p = 0.03). A leave-one-out sensitivity analysis performed for overall complications affected the final outcome of the meta-analysis.

CONCLUSION

This meta-analysis demonstrates no clear benefit in selecting LP over NLP for the fixation of lateral malleolus fractures.

Octogenarian With Acromion Stress Fracture Nonunion With Reverse Total Shoulder Prosthesis Reconstructed With Plates and Screws: A Case Report

An 85-year-old male underwent open reduction and internal fixation (ORIF) for a displaced acromion stress fracture that occurred two years prior. The complete fracture occurred two months after an ipsilateral reverse total shoulder arthroplasty (RTSA). Four weeks after his RTSA, the pain was felt at the posterior-superior shoulder with activities of his daily living as a rancher, reflecting non-compliant use. A stress fracture was suspected but not detected radiographically. Four weeks later, higher pain occurred after he lifted a hay bale, and a displaced basilar acromion fracture was detected. Non-operative management spanned 20 months, which he ultimately deemed unacceptable because of pain with minor activities. ORIF was then done. Approximately 10 months after the ORIF surgery, both plates sustained fatigue breakage; however, the fracture consolidated, and his pain remained low. He is the oldest patient described to ultimately have a successful acromion fracture ORIF and only the third reported acromion fracture ORIF in octogenarians following RTSA. We report the ORIF technique, its good outcome, and a literature review of elderly patients who had ORIF for this problem.

Comparison of Complications, Metalwork Removal and Cost Between Locking and Tubular Plates for Lateral Malleolus Fractures Fixation

Introduction Ankle fractures are common injuries in orthopaedic practice. Open reduction with internal fixation is the main line of management of displaced ankle fractures in fit patients. The study aims to analyse the complications, re-operation rate and cost difference between one-third tubular and locking plates which are the most frequently used constructs in lateral malleolus fractures. Materials and methods The total number of presented ankle fractures from April to August during the years 2015, 2017 and 2019 to our Tertiary Hospital in the United Kingdom were screened. Data including operative fixation, plate used, complication rates, the need for revision surgery and metalwork removal were collected from the hospital's electronic Virtual Trauma Board. Patients who had less than one-year follow-up were excluded. Results A total of 174 patients were included which represents more than half of presented ankle fractures (56%) with a decline in the mean age of operated patients from 56.4 in 2015 to 46.2 in 2019. The majority of fixation used tubular plates (n=122) versus (n=52) for locking plates. Locking plate fixation doubled from 10 in 2015 to 23 in 2019. However, they only contributed to 27% of the total operated ankle fractures. Despite the initial higher complications and removal rates of locking plates in 2015 (P<0.042 and P<0.038 respectively), there was no significant difference in overall complications, revision rates, and metalwork removal between locking plates and tubular plates (p=0.084, FEp= 0.158 and p=0.096 respectively). There was an estimated extra cost of £15938.60 for the use of locking plates during the study timeline. Conclusion There was no significant difference in overall complications, revision surgery and metalwork removal between tubular and locking plates in treating lateral malleolus fractures despite the significantly higher cost of locking constructs. Further studies are needed to illustrate the trend and cost-effective analysis of the tubular and locking plates in treating ankle fractures.

Identifying the Potential Role of Regional Bone Mineral Density on the Degree of Malleolar Involvement in Acute Ankle Fractures

Ankle fractures are a common traumatic lower extremity injury and are generally classified and characterized by the rotational mechanism of injury. At each malleolus (i.e., posterior, medial, and lateral) a fracture can occur or a ligamentous injury may be sustained. The purpose of this retrospective study was to determine if bone mineral density is a contributing factor on the number of fractured malleoli versus soft tissue injury in adult ankle fractures. Data was obtained from a registry of ankle fractures that were operatively treated by the foot and ankle team throughout our institutional facilities, from July 2017 to August 2019, and in which a preoperative computerized tomography scan was performed. Regional bone mineral density (BMD) was measured by calculating the average Hounsfield Unit (HU) on axial computerized tomography images of the distal fibula and tibia. The average HU was then compared to the number of fractured malleoli. One hundred eight patients met the study criteria. We identified statistically significant relationships between decreased BMD with increasing age (p < .01) and the male gender (p < .01). After adjusting for the covariates age and gender, no statistically significant relationship was identified between BMD and the number of malleoli involved in a given ankle fracture (p = .11). These findings suggest that while more investigation is required for ankle fracture patterns and BMD evaluation, increased age and biologic female gender is significantly related to decreased BMD as identified via HU.

Screw-only fibular construct for Weber B ankle fractures: A retrospective clinical and cost comparison to assess feasibility for resource-limited settings

INTRODUCTION

Ankle fractures are one of the most common injuries sustained worldwide, with the majority being isolated lateral malleolus fractures. The majority of the world's population live in Low and Middle Income Countries (LMIC), where implant cost may limit surgical treatment of ankle fractures. We investigate if Weber B ankle fractures could be effectively treated with a lower-cost technique using two screws between the fibula and the tibia to neutralize an interfragmentary lag screw.

METHODS

After IRB approval, consecutive patients from January 1, 2020 to December 31, 2020 with Weber-B ankle fractures were treated using AO technique (AOT) with plate osteosynthesis neutralizing an interfragmentary screw. Syndesmotic injuries, as well as injuries to the medial malleolus or foot were treated according to the surgeon's preferences. From January 1, 2021 to December 31, 2021 these injuries were treated with a screw-only technique (SOT) with two fibula pro tibia screws to neutralize an interfragmentary screw. Patient demographics including age, sex, BMI, smoking status, associated rheumatoid arthritis, and associated diabetes mellitus were recorded. The primary outcome variable was a stable radiographic mortise at six weeks post-surgery, secondary outcome variables included clinical union, infection, hardware removal, and implant cost for lateral malleolar fixation charged to the hospital.

RESULTS

Seventeen AOT and 10 SOT constructs were included. Demographic characteristics were similar between groups. All fractures maintained a stable mortise with clinical union at 6 weeks without infection. There was a statistically significant difference in hardware removal (17.6% AOT, 50% SOT, p = 0.012). The average implant cost to the hospital of the lateral malleolar fixation was significantly less in the SOT group ($592 (SD $229)), compared to the AOT group ($1,949.97 (SD $562)), (p < 0.0001).

CONCLUSION

We introduce proof of concept of a novel lower-cost fixation strategy for Weber B ankle fractures that maintained a stable mortise with clinical union at six weeks post-surgery. However, there was a significantly higher rate of hardware removal following fixation with a screw-only construct.

Mini-Blade Plate to Obtain Length Across Lateral Malleolus Fractures: Surgical Technique and Biomechanical Evaluation

BACKGROUND

Restoration of fibular length is the main determinant in preventing mal-union and early ankle arthritis in lateral malleolus fractures. A 1/3 tubular plate fashioned into a mini-blade plate can be used to distract the distal fragment and achieve length in a controlled fashion over time. The purpose of this study was to describe the surgical technique and perform a biomechanical comparison of the blade plate to a locking plate.

METHODS

A 1/3 tubular plate is fashioned into a 135° blade plate. Blades are seated into the lateral malleolus and a distally directed force is applied on the plate to obtain length.A lateral malleolus fracture was created in 20 cadaveric ankles. The distal fragment was fixed with either a blade plate (BP, n = 10) or a locking plate (LP, n = 10). A distally directed force was applied by an Instron machine and fracture distraction, maximal load and construct stiffness were measured and compared.

RESULTS

The average maximal load was 262.06 N compared to 255.52 N for the BP and LP groups, respectively. The maximal distraction was 3.57 mm compared to 4.57 mm for the BP and LP groups, respectively. The loading pattern of the blade plate over time differed from that of a locking plate as the blades seat into bone.

CONCLUSION

A 1/3 tubular mini-blade plate demonstrates biomechanical similarities in terms of load and distraction to the more expensive locking plate. We recommend using this technique for fractures with late presentation or with significant shortening.

LEVEL OF EVIDENCE

Level V-Mechanism-based reasoning.

One-Third Tubular Plate Remains a Clinically Good Option in Danis-Weber Type B Distal Fibular Fracture Fixation

OBJECTIVE

To compare the clinical outcomes of locking plate (LP) and non-locking one-third tubular plate (TP) fixation, and to provide guidance on plate selection for Danis-Weber type B distal fibular fracture treatment.

METHODS

In total, 83 patients who underwent plate fixation for Danis-Weber type B distal fibular fractures between March 2013 and July 2018 were retrospectively reviewed: 41 (49.0%) received LPs and 42 (51.0%) received TPs. Patients' demographic data, follow-up durations, the proportion of comminuted fractures, and ankle range of motion were investigated. The American Orthopaedic Foot and Ankle Society (AOFAS) ankle-hindfoot scale, Karlsson scale, Foot and Ankle Ability Measure (FAAM), and Lower Extremity Functional Scale (LEFS) scores were assessed. The radiographic union progression and implant removal time were evaluated, along with postoperative complications. Data from the LP and TP groups were compared statistically.

RESULTS

The mean patient ages were 53.3 ± 17.5 years (range, 16-80 years) and 47.6 ± 17.0 years (range, 14-68 years) in the LP and TP groups, respectively (P > 0.05). The gender distribution did not differ significantly between groups (P > 0.05). Other demographic data also did not differ significantly between groups (P > 0.05). The mean follow-up durations were 16.8 ± 7.7 months (range, 13.0-19.0 months) in the LP group and 16.1 ± 6.2 months (range, 12.0-20.0 months) in the TP group (P > 0.05). Comminuted fractures were observed in 18 of 41 (43.9%) patients with LP and 10 of 42 (23.8%) patients with TP (P > 0.05). Forward bending ankle dorsiflexion was possible at the final follow-up in 82.9% and 85.7% of LP and TP patients, respectively (P > 0.05). The AOFAS ankle-hindfoot scale, Karlsson scale, FAAM, and LEFS scores did not differ significantly between groups at the final follow-up (P > 0.05). The pre-fracture and final postoperative scores on these four instruments did not differ significantly in the LP or TP group (P > 0.05). The mean times to radiographic union progression were 13.5 ± 7.1 weeks and 15.1 ± 10.2 weeks in the LP and TP groups, respectively (P > 0.05). The mean times to implant removal surgery reaffirming solid union were 15.6 ± 5.5 months and 14.8 ± 4.9 months in the LP and TP groups, respectively (P > 0.05). Hardware irritation was detected in five patients in the LP group (12.2%) and three in the TP group (7.1%) (P > 0.05). One patient in the LP group and two in the TP group developed superficial wound infections, which resolved without further surgical intervention.

CONCLUSION

Conventional TP remains a good option for the fixation of Danis-Weber type B distal fibular fractures, regardless of the biomechanical properties.

Nontraditional Methods of Fibula Fixation

This article explores different nontraditional methods that could be adopted in clinical settings as alternatives to the traditional fibular fixation. Less invasive methods, such as intramedullary nail and screw fixation, might be viable alternatives for managing ankle fractures. These methods might especially benefit patients with poor soft tissue envelopes, low immunity, and poor bone quality. There is minimal soft tissue coverage for most orthopedic implants around the ankle. Various authors have highlighted the importance of minimally invasive surgery as an effective modality for ensuring superior prognosis for ankle fracture surgery or those fractures involving both the distal tibia and fibula.

Necessity of Interfragmentary Lag Screws in Precontoured Lateral Locking Plate Fixation for Supination-External Rotation Lateral Malleolar Fractures

BACKGROUND

Interfragmentary lag screws, protected by a plate, have been applied for many years in the treatment of supination-external rotation (SER) ankle fractures. Recently, similar biomechanical stability was found between fixation completed with a plate and lag screw and a plate alone. The aim of this study was to determine whether interfragmentary lag screws are necessary during precontoured lateral locking plate fixation for SER lateral malleolar fractures.

METHODS

A prospective randomized controlled trial of 76 patients with unilateral Lauge-Hansen SER lateral malleolar fractures was conducted. The patients were randomly treated either with or without the use of interfragmentary lag screws with precontoured lateral locking plate fixation. Clinical outcomes were assessed using the Olerud-Molander Ankle Score and a visual analog scale for pain. Radiologic outcomes were assessed based on the Kellgren and Lawrence scale score, incongruity of the ankle joint, and type of fracture healing. Sixty-nine patients completed 12 months of follow-up.

RESULTS

There was no significant difference between the 2 groups with regard to clinical outcomes at 3 and 12 months after surgery and radiologic outcomes at 12 months after surgery. All patients in both groups achieved primary bone healing.

CONCLUSION

The results of this study suggest that with precontoured lateral locking plate fixation, the use of interfragmentary lag screw is not essential in the treatment SER lateral malleolar fractures.

LEVEL OF EVIDENCE

Level I, prospective randomized study.

A comparison of bone union and complication rates between locking and non-locking plates in distal fibular fracture: Retrospective study of 106 cases

BACKGROUND

Ankle fractures represents the third most frequent fracture in elderly patients. There is a current tendency to fix long bones fractures with locking plates. However, we rarely find published accounts about the use of locking plates in distal fibula fractures, except for biomechanical ones, studying human cadaveric fibula.

OBJECTIVES

The main objective was to compare radiographic bone union rates at 6 and 12 weeks of follow up, then wound complications and hardware removal rates, and construct cost.

STUDY DESIGN & METHODS

We retrospectively analyzed 105 patients who underwent surgery with locking plates or non-locking plates over a two-year period, out of which 42 patients were treated with non-locking plates (VIVES™ - Stryker^Ⓡ) and 63 with locking plates (VariAx™ - Stryker^Ⓡ,). We analyzed bone union on anterior posterior and lateral X-rays of the ankle. We collected data of wound complications and hardware removal from patient records. Multiple linear regression techniques were performed after identifying dependent variables.

RESULTS

There was no significant difference between non-locking and locking plates in the radiographic bone union rate of distal fibula, respectively at 6 and 12 post-operative weeks (85.71% vs. 81%; p = 0.525 and 97.62% vs. 96.83%; p = 1). No significant difference was found in the wound complication rate between the two groups (11.9% vs. 11.12%; p = 0.9). No significant differences were found in the hardware removal rate, either with or without operative site's infection (respectively: 30.95% vs. 39.68%; p = 0.361 and 21.42% vs. 38.09%; p = 0.071). Cost efficiency is in the favor of non-locking plates.

CONCLUSION

Non-locking constructs are as effective as locking constructs in the treatment of displaced distal fibula fractures at a substantially lower cost. High-quality randomized controlled trials are needed in the future to verify the finding of this study.

Management of Isolated Lateral Malleolus Fractures

Isolated lateral malleolus fractures represent one of the most common injuries encountered by orthopaedic surgeons. Nevertheless, appropriate diagnosis and management of these injuries are not clearly understood. Ankle stability is maintained by ligamentous and bony anatomy. The deep deltoid ligament is considered the primary stabilizer of the ankle. In the setting of an isolated lateral malleolus fracture, identifying injury to this ligament and associated ankle instability influences management. The most effective methods for assessing tibiotalar instability include stress and weight-bearing radiographs. Clinical examination findings are important but less reliable. Advanced imaging may not be accurate for guiding management. If the ankle is stable, nonsurgical management produces excellent outcomes. In the case that clinical/radiographic findings are indicative of ankle instability, surgical fixation options include lateral or posterolateral plating or intramedullary fixation. Locking plates and small or minifragment fixation are important adjuncts for the surgeon to consider based on individual patient needs.

Economic Analysis of Anatomic Plating Versus Tubular Plating for the Treatment of Fibula Fractures

Ankle fractures are among the most common injuries requiring operative management. Implant choices include one-third tubular plates and anatomically precontoured plates. Although cadaveric studies have not revealed biomechanical differences between various plate constructs, there are substantial cost differences. This study sought to characterize the economic implications of implant choice. A retrospective review was undertaken of 201 consecutive patients with operatively treated OTA type 44B and 44C ankles. A Nationwide Inpatient Sample query was performed to estimate the incidence of ankle fractures requiring fibular plating, and a Monte Carlo simulation was conducted with the estimated at-risk US population for associated plate-specific costs. The authors estimated an annual incidence of operatively treated ankle fractures in the United States of 59,029. The average cost was $90.86 (95% confidence interval, $90.84-$90.87) for a one-third tubular plate vs $746.97 (95% confidence interval, $746.55-$747.39) for an anatomic plate. Across the United States, use of only one-third tubular plating over anatomic plating would result in statistically significant savings of $38,729,517 (95% confidence interval, $38,704,773-$38,754,261; P<.0001). General use of one-third tubular plating instead of anatomic plating whenever possible for fibula fractures could result in cost savings of up to nearly $40 million annually in the United States. Unless clinically justifiable on a per-case basis, or until the advent of studies showing substantial clinical benefit, there currently is no reason for the increased expense from widespread use of anatomic plating for fractures amenable to one-third tubular plating. [Orthopedics. 2018; 41(2):e252-e256.].

Locking versus non-locking one-third tubular plates for treating osteoporotic distal fibula fractures: a comparative study

INTRODUCTION

Ankle fractures represent the third most common fracture in elderly patients, after hip and wrist fractures. Distal fibula fractures in this population are closely related to osteoporosis, which renders commonly used methods of internal fixation technically demanding and prone to failure. Currently there is a tendency to fix osteoporotic metaphyseal and epiphyseal fractures with locking plates. However, published accounts about the use of this technology in osteoporotic distal fibula fractures are scarce. In this study we compare the results of two groups of patients who underwent surgery for these types of fracture, one group received locking and the other non-locking screws, both using one-third tubular plates.

METHODS

Sixty-two patients, aged over 64 years, underwent surgery for osteoporotic distal fibula fractures between 2011 and 2014. Forty-five of them were stabilized with a non-locking plate and the remaining 17 with a locking plate fixation. Follow-up was performed at 4, 8, 12, 26, and 52 weeks. Results were assessed according to the AOFAS Ankle-Hindfoot Score and radiological criteria for consolidation.

RESULTS

Average time to union and AOFAS scores at 6 and 12 months were similar in both groups, including for the individual categories: function, pain, mobility, and alignment. Only time until partial weight bearing was significantly lower in the locking plate group (4.69 ± 2.63 vs 7.77 ± 4.30, p = 0.03). The most common complications were wound dehiscence and superficial infection (two cases of both).

CONCLUSIONS

Both locking and conventional non-locking plates achieved similar treatment outcomes in this group of osteoporotic patients aged over 64. However, locking plates may offer more benefits in cases that have to take into account immobilization time and concomitant soft-tissue damage.

Implant Failure Rates and Cost Analysis of Contoured Locking Versus Conventional Plate Fixation of Distal Fibula Fractures

The authors analyzed 330 consecutive Weber B distal fibula fractures that occurred during a 3-year period and were treated with either a contoured locking plate or a conventional one-third tubular plate to compare the cost and failure rates of the 2 constructs. The primary outcomes were failure of the distal fibular implant and loss of reduction. Secondary outcomes were surgical wound infection requiring surgical debridement and/or removal of the fibular implant, and removal of the fibular plate for persistent implant-related symptoms. No failure of the fibular plates or distal fibular fixation occurred in either group. A total of 5 patients required surgical revision of syndesmotic fixation within 4 weeks of the index surgery. Of these patients, 1 was in the contoured locking plate group and 4 were in the one-third tubular plate group (P=.610). The rate of deep infection requiring surgical debridement and/or implant removal was 6.2% in the contoured locking plate group and 1.4% in the one-third tubular plate group (P=.017). The rate of lateral implant removal for either infection or symptomatic implant was 9.3% in the contoured locking plate group and 2.3% in the one-third tubular plate group (P=.005). A typical contoured locking plate construct costs $800 more than a comparable one-third tubular plate construct. Based on a calculated estimate of 60,000 locking plates used annually in the United States, this difference translates to a potential avoided annual cost of $50 million nationally. This study demonstrates that it is possible to treat Weber B distal fibula fractures with one-third tubular plates at a substantially lower cost than that of contoured locking plates without increasing complications. [Orthopedics. 2017; 40(6):e1024-e1029.].

Reinforced fixation of distal fibula fractures in elderly patients; A meta-analysis of biomechanical studies

BACKGROUND

There is an increasing incidence of fragility fractures of the ankle in the elderly population. The open reduction and internal fixation of these fractures is challenging, due to reduced bone stock quality as a result of osteoporosis. Biomechanical studies have shown contradicting results using reinforced constructions in the fixation of fibular fractures. We therefore performed a meta-analysis of biomechanical studies on reinforced fixation of distal fibular fractures.

METHODS

A literature search was conducted utilizing three online databases considering biomechanical testing of different fixation techniques of distal fibular fractures. A meta-analysis was performed on two biomechanical outcome measures; torsional stiffness and torque to failure.

FINDINGS

In a total number of 13 studies 8 different reinforcement techniques were identified. Of these studies, six compared locked lateral plating with conventional lateral plating. There were no statistically significant differences between the locking and non-locking lateral plate for torque to failure or torsional stiffness. Locked plating strength was independent from bone mineral density in four studies. An antiglide plate proved to be biomechanically superior compared to a lateral plate in one study and to a locked plate in another.

INTERPRETATION

Locked lateral plates are not biomechanically superior to conventional lateral plates. However the strength of locked plating may be independent of bone mineral density and could make this technique more suitable in the fixation of severe osteoporotic fractures.

A Biomechanical Comparison of Locking Versus Conventional Plate Fixation for Distal Fibula Fractures in Trimalleolar Ankle Injuries

Previous biomechanical studies have advocated the use of locking plates for isolated distal fibula fractures in osteoporotic bone. Complex rotational ankle injuries involve an increased number of fractures, which can result in instability, potentially requiring the same fixed angle properties afforded by locking plates. However, the mechanical indication for locking plate technology has not been tested in this fracture model. The purpose of the present study was to compare the biomechanical properties of locking and conventional plate fixation for distal fibula fractures in trimalleolar ankle injuries. Fourteen (7 matched pairs) fresh-frozen cadaver leg specimens were used. The bone mineral density of each was obtained using dual x-ray absorptiometry scans. The fracture model simulated an OTA 44-B3.3 fracture. The syndesmosis was not disrupted. Each fracture was fixated in the same fashion, except for the distal fibula plate construct: locking (n = 7) and one-third tubular (n = 7). The specimens underwent axial and torsional cyclic loading, followed by torsional loading to failure. No statistically significant differences were found between the locking and conventional plate constructs during both fatigue and torque to failure testing (p > .05). Our specimen bone mineral density averages did not represent poor bone quality. The clinical implication of the present study is that distal fibular locking plates do not provide a mechanical advantage for trimalleolar ankle injuries in individuals with normal bone density and in the absence of fracture comminution.

Ankle fractures in the elderly: an overlooked burden

Ankle fractures in the elderly are a complex under-recognized burden which require a multidisciplinary approach to management. This article discusses the holistic approach required, including the up-to-date surgical management options and the areas for future development.

Clinical Comparison of Minifragment Plates Versus Conventional Semitubular Plates for Fixation of Distal Fibula Fractures

BACKGROUND

Although operative stabilization of unstable distal fibula fractures is frequently performed and discussed, the ideal implant and technique for these injuries is still debated.

QUESTIONS/PURPOSES

The purpose of this study was to determine if minifragment plating of distal fibula fractures would clinically provide equivalent fixation and cost and minimize hardware prominence when compared with standard one-third tubular plating.

PATIENTS AND METHODS

A retrospective review was conducted on 44 patients who had undergone operative stabilization of a displaced fibula fracture. Inclusion required fibula fixation with either a traditional one-third semitubular plate or a 2.7-mm minifragment plate. Retrospective review of the patient demographics, injury and surgical variables, and radiographs was completed by two surgeons not involved with the patients' original care.

RESULTS

The minifragment group demonstrated equivalency in maintenance of fracture reduction relative to standard tubular plating. Both groups were able to maintain the talocrural angle with less than 1° of change from initial postoperative to final postoperative radiographs. No significant differences were seen in postoperative hardware irritation between groups.

CONCLUSIONS

Use of a minifragment plating system for displaced fibula fractures appears to be safe but comes with the significant potential added cost of the technology. Interestingly, no significant differences were seen in implant-related irritation or implant removal, but further investigation with a larger study population would help better determine these outcomes.

Biomechanical comparison of a lateral polyaxial locking plate with a posterolateral polyaxial locking plate applied to the distal fibula

BACKGROUND

Polyaxial locking plates are becoming popular for the fixation of distal fibula fractures. This study establishes how construct stiffness and plate loosening, measured as range of motion, differs between lateral and posterolateral plate location.

METHODS

Seven matched pairs of cadaver fibulae were osteotomized in standardized fashion to produce a Weber type B distal fibula fracture. The fragments were fixated with an interfragmentary lag screw and polyaxial locking plates, with one fibula in each pair receiving a posterolateral anti-glide-plate, and the other a lateral neutralization-plate. In a biomechanical test, the bending and torsional stiffnesses of the constructs and the ranges of motion (ROM) were measured and subjected to a paired comparison.

RESULTS

The laterally plated group had a higher median (interquartile range) bending stiffness (29.2 (19.7) N/mm) and a smaller range of motion (2.06 (1.99) mm) than the posterolaterally plated group (14.6 (20.6) N/mm, and 4.11 (3.28) mm, respectively); however, the results were not statistically significant (pbending=0.314; pROM=0.325). Similarly, the torsional stiffness did not differ significantly between the two groups (laterally plated: 426 (259) Nmm/°; posterolaterally plated: 248 (399) Nmm/°; ptorsion=0.900). The range of motion measurements between the two groups under torsional loading were also statistically insignificant (laterally plated: 8.88 (6.30) mm; posterolaterally plated: 15.34 (12.64) mm; pROM=0.900).

CONCLUSION

In biomechanical cadaver-model tests of Weber type B fracture fixation with polyaxial locking plates, laterally plated constructs and posterolaterally plated constructs performed without significantly difference. Therefore, other considerations, such as access morbidity, associated injuries, patient anatomy, or surgeon's preference, may guide the choice of plating pattern. Further clinical studies will be needed for the establishment of definitive recommendations.

CLINICAL RELEVANCE

Information on the behavior of polyaxial locking plates is relevant to surgeons performing internal fixation of distal fibula fractures.

Topical review: locking plate technology in foot and ankle surgery

The use of locking plate technology in foot and ankle surgery has increased over the last decade. Reported applications include fracture repair, deformity correction, and arthrodesis. There is limited evidence, however, to guide clinicians with regard to the appropriate and optimal use of this technology. This work aims to examine the current biomechanical and clinical evidence comparing locking construct technology to other forms of fixation in the field of foot and ankle surgery.