Effect of Laser Micromachining of Titanium on Viability and Responsiveness of Osteoblast-Like Cells

Proliferation of Osteoblasts on Laser-Modified Nanostructured Titanium Surfaces

Nanostructured titanium has become a useful material for biomedical applications such as dental implants. Certain surface properties (grain size, roughness, wettability) are highly expected to promote cell adhesion and osseointegration. The aim of this study was to compare the biocompatibilities of several titanium materials using human osteoblast cell line hFOB 1.19. Eight different types of specimens were examined: machined commercially pure grade 2 (cpTi2) and 4 (cpTi4) titanium, nanostructured titanium of the same grades (nTi2, nTi4), and corresponding specimens with laser-treated surfaces (cpTi2L, cpTi4L, nTi2L, nTi4L). Their surface topography was evaluated by means of scanning electron microscopy. Surface roughness was measured using a mechanical contact profilometer. Specimens with laser-treated surfaces had significantly higher surface roughness. Wettability was measured by the drop contact angle method. Nanostructured samples had significantly higher wettability. Cell proliferation after 48 hours from plating was assessed by viability and proliferation assay. The highest proliferation of osteoblasts was found in nTi4 specimens. The analysis of cell proliferation revealed a difference between machined and laser-treated specimens. The mean proliferation was lower on the laser-treated titanium materials. Although plain laser treatment increases surface roughness and wettability, it does not seem to lead to improved biocompatibility.

Controlled laser texturing of titanium results in reliable osteointegration

We have developed a laser-textured superhydrophilic Ti-6Al-4V surface with unique surface chemistry and topography that substantially promotes osteoblast adhesion in culture. Here we investigate the osteointegration of laser-textured implants in an ovine model. Our hypothesis was that laser-textured implants, without any surface coating (LT), would encourage comparable amounts of bone-implant contact and interfacial strength when compared with widely accepted hydroxyapatite (HA) coated implants. Additionally, we hypothesized that LT would significantly increase bony integration compared with machine-finished (MF) and grit-blasted (GB) implants. Forty-eight tapered transcortical pins were implanted into six sheep. Four experimental groups (LT, HA, MF, and GB) were investigated (n = 12) and implants remained in vivo for 6 weeks. Bone apposition rates, interfacial shear strength, and bone-implant contact (BIC) were quantified. The interfacial strength of LT and HA implants were found to be significantly greater than GB (p = 0.032 and p = 0.004) and MF (p = 0.004 and p = 0.004, respectively), but no significant difference between LT and HA implants was observed. Significantly increased BIC was measured adjacent to HA implants when compared with both LT and GB implant surfaces (p = 0.022 and p = 0.006, respectively). No significant difference was found when LT and GB implants were compared. However, all surface finishes encouraged significantly increased BIC when compared with the MF surface. Maximizing implant fixation to host bone is vital for its long-term success. The production of an LT surface is a simple and cheap manufacturing process and this study demonstrated that laser-textured implants are a very promising technical development that warrants further research. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:820-828, 2017.

In Vitro Behavior of Primary Human Osteoblasts Onto Microrough Titanium Surface

OBJECTIVE

The aim of this study was to evaluate in vitro the behavior and the biocompatibility of primary human osteoblasts (HOs) grown onto different implant surface.

METHODS AND MATERIALS

HOs were cultured onto sandblasted/acid-etched (control group) and sandblasted/acid-etched followed by coating with inorganic ions (test group) experimental titanium discs. At established times, SEM analysis, LDH assay, MTT assay, and enzyme-linked immunosorbent assay for type 1 collagen, interleukin (IL)-6, and PGE2 secretion were performed.

RESULTS

Both surfaces promote HOs adhesion and proliferation. After 21 days, cells on test surfaces are well spread, flattened, and attached by cellular extensions, whereas cells on control discs appear mainly elongated. Lower LDH levels and higher values of MTT assay are recorded for cells on test respect to control surfaces at each experimental time. Type 1 collagen release increases until 14 days, significantly decreasing at day 21 in cells grown on both surfaces. IL-6 and PGE2 secretion shows a peak in control group samples at day 7, whereas their levels do not significantly modify in both groups at days 14 and 21.

CONCLUSION

Results indicate that the test group surface is more biocompatible, well tolerated, and suitable for supporting osteoblasts growth and proliferation.

Protein adsorption on a laser-modified titanium implant surface

PURPOSE

The aim of this study was to investigate the earlier phase of the osseointegration of a laser-treated implant surface in terms of human protein adsorption.

MATERIALS AND METHODS

Titanium surfaces were divided into machined (M), sandblasted (SB), and laser-treated (LT). The LT surfaces were created with an Nd diode-pumped laser in Q-switching, whereas the SB were treated with Al2O3. An x-ray photoelectron spectroscopy (XPS) analysis of titanium surface was performed. Titanium discs were used for albumin and fibronectin adsorption evaluation through fluorescence intensity. Fibronectin evaluation was also made with Western Blot analysis on experimental implants.

RESULTS

LT discs appeared to trigger a higher albumin and fibronectin adsorption with a regular pattern. The mean count of albumin adsorption was 0.29 and 3.8 for SB and LT, respectively (P = 0.016), whereas fibronectin values were 0.67 and 4.9 for (SB) and (LT) titanium (P = 0.02). XPS analysis showed that titanium, oxygen, carbon, and nitrogen were found on all 3 surfaces.

CONCLUSION

Laser-engineered porous titanium surface seems to promote, in vitro, the adsorption of albumin and fibronectin more than sandblasted (SB) or machined (M) implants.

Classification and Effects of Implant Surface Modification on the Bone: Human Cell-Based In Vitro Studies

Implant surfaces are continuously being improved to achieve faster osseointegration and a stronger bone to implant interface. This review will present the various implant surfaces, the parameters for implant surface characterization, and the corresponding in vitro human cell-based studies determining the strength and quality of the bone-implant contact. These in vitro cell-based studies are the basis for animal and clinical studies and are the prelude to further reviews on how these surfaces would perform when subjected to the oral environment and functional loading.

Development of a novel biomimetic micro/nano-hierarchical interface for enhancement of osseointegration

In the present study, a novel biomimetic micro/nano-hierarchical interface was obtained and an unexpected trabecular bone-like interface was given.

An in vitro evaluation of the responses of human osteoblast-like SaOs-2 cells on SLA titanium surfaces irradiated by different powers of CO2 lasers

Bacterial biofilms have been identified as the primary etiological factor for the development and progression of peri-implantitis. Lasers have been shown to remove bacterial plaque from titanium surfaces effectively and can restore its biocompatibility without damaging these surfaces. Therefore, the aim of this study was to evaluate the responses (i.e., the cell viability and morphology) of human osteoblast-like SaOs-2 cells to sandblasted, large grit, and acid-etched (SLA) titanium surfaces irradiated by CO2 lasers at two different power outputs. A total of 24 SLA disks were randomly radiated by CO2 lasers at either 6 W (group 1, 12 disks) or 8 W (group 2, 12 disks). Non-irradiated disks were used as a control group (four disks). The cell viability rates of the SaOs-2 cells in the control and study groups (6 and 8 W) were 0.33 ± 0.00, 0.24 ± 0.11, and 0.2372 ± 0.09, respectively (P < 0.6). Cells with cytoplasmic extensions and spreading morphology were most prominent in the control group (141.00 ± 29.00), while in the study groups (6 and 8 W), the number of cells with such morphology was 60.40 ± 26.00 and 35.20 ± 5.40, respectively (P < 0.005). Within the limits of this study, it may be concluded that the use of CO2 lasers with the aforementioned setting parameters could not be recommended for decontamination of SLA titanium surfaces.

Osseointegration: hierarchical designing encompassing the macrometer, micrometer, and nanometer length scales

OBJECTIVE

Osseointegration has been a proven concept in implant dentistry and orthopedics for decades. Substantial efforts for engineering implants for reduced treatment time frames have focused on micrometer and most recently on nanometer length scale alterations with negligible attention devoted to the effect of both macrometer design alterations and surgical instrumentation on osseointegration. This manuscript revisits osseointegration addressing the individual and combined role of alterations on the macrometer, micrometer, and nanometer length scales on the basis of cell culture, preclinical in vivo studies, and clinical evidence.

METHODS

A critical appraisal of the literature was performed regarding the impact of dental implant designing on osseointegration. Results from studies with different methodological approaches and the commonly observed inconsistencies are discussed.

RESULTS

It is a consensus that implant surface topographical and chemical alterations can hasten osseointegration. However, the tailored combination between multiple length scale design parameters that provides maximal host response is yet to be determined.

SIGNIFICANCE

In spite of the overabundant literature on osseointegration, a proportional inconsistency in findings hitherto encountered warrants a call for appropriate multivariable study designing to ensure that adequate data collection will enable osseointegration maximization and/or optimization, which will possibly lead to the engineering of endosteal implant designs that can be immediately placed/loaded regardless of patient dependent conditions.

Effects of Er: YAG laser irradiation on wettability, surface roughness, and biocompatibility of SLA titanium surfaces: an in vitro study

The erbium: yttrium-aluminum-garnet (Er: YAG) laser has been introduced as an effective method in the decontamination of implant surfaces. Data concerning the effects of the Er: YAG laser on the biological and surface properties of titanium are conflicting. Cellular behavior is greatly affected by surface properties, including composition, roughness, wettability, and morphology of the titanium surface. The aim of this study was to investigate the influence of the Er: YAG laser on the biocompatibility, surface roughness, and wettability of sandblasted and acid-etched (SLA) titanium surfaces. Twenty-one SLA titanium disks were irradiated by the Er: YAG laser at a pulse energy of 100 mJ, with a pulse frequency of 10 Hz under water irrigation for 1 min. Cell viability, surface roughness, and wettability alterations were evaluated. Thirteen nonirradiated SLA disks were used as the control groups. Human osteoblast-like SaOs-2 cells were seeded onto the disks in culture media. Cell viability was evaluated using the methylthiazol tetrazolium assay. The surface roughness and wettability of the test and control groups were measured using profilometer and tensiometer devices, respectively. A significantly higher cell viability rate was observed in the test group (p = 0.032). The surface roughness was significantly reduced in the test group compared with the control group (p = 0.008). The surface wettability was significantly higher in the test group (p = 0.004). Within the limits of this study, the application of the Er: YAG laser with the previously described properties did not appear to have adverse effects on the biocompatibility of the SLA titanium surfaces. Application of this laser decreased the surface roughness and increased the wettability of the SLA titanium surfaces.