Diagnostic Yield of Cone-beam-Derived Augmented Fluoroscopy and Ultrathin Bronchoscopy Versus Conventional Navigational Bronchoscopy Techniques

Determinants of radiation exposure during mobile cone-beam CT-guided robotic-assisted bronchoscopy

BACKGROUND AND OBJECTIVE

Robotic-assisted bronchoscopy (RAB) is an emerging modality to sample pulmonary lesions. Cone-beam computed tomography (CBCT) can be incorporated into RAB. We investigated the magnitude and predictors of patient and staff radiation exposure during mobile CBCT-guided shape-sensing RAB.

METHODS

Patient radiation dose was estimated by cumulative dose area product (cDAP) and cumulative reference air kerma (cRAK). Staff equivalent dose was calculated based on isokerma maps and a phantom simulation. Patient, lesion and procedure-related factors associated with higher radiation doses were identified by logistic regression models.

RESULTS

A total of 198 RAB cases were included in the analysis. The median patient cDAP and cRAK were 10.86 Gy cm2 (IQR: 4.62-20.84) and 76.20 mGy (IQR: 38.96-148.38), respectively. Among staff members, the bronchoscopist was exposed to the highest median equivalent dose of 1.48 μSv (IQR: 0.85-2.69). Both patient and staff radiation doses increased with the number of CBCT spins and targeted lesions (p < 0.001 for all comparisons). Patient obesity, negative bronchus sign, lesion size <2.0 cm and inadequate sampling by on-site evaluation were associated with a higher patient dose, while patient obesity and inadequate sampling by on-site evaluation were associated with a higher bronchoscopist equivalent dose.

CONCLUSION

The magnitude of patient and staff radiation exposure during CBCT-RAB is aligned with safety thresholds recommended by regulatory authorities. Factors associated with a higher radiation exposure during CBCT-RAB can be identified pre-operatively and solicit procedural optimization by reinforcing radiation protective measures. Future studies are needed to confirm these findings across multiple institutions and practices.

Pulmonary Cytopathology: Current and Future Impact on Patient Care

Small biopsies of lung are routinely obtained by many methods, including several that result in cytologic specimens. Because lung cancer is often diagnosed at a stage for which primary resection is not an option, it is critical that all diagnostic, predictive, and prognostic information be derived from such small biopsy specimens. As the number of available diagnostic and predictive markers expands, cytopathologists must familiarize themselves with current requirements for specimen acquisition, handling, results reporting, and molecular and other ancillary testing, all of which are reviewed here.

Cone-beam CT-based Navigation With Augmented Fluoroscopy of the Airways for Image-guided Bronchoscopic Biopsy of Peripheral Pulmonary Nodules: A Prospective Clinical Study

BACKGROUND

Cone-beam computed tomography (CBCT) and augmented fluoroscopy (AF), in which intraprocedural CBCT data is fused with fluoroscopy, have been utilized as a novel image-guidance technique for biopsy of peripheral pulmonary lesions. The aim of this clinical study is to determine the safety and diagnostic performance of CBCT-guided bronchoscopy with advanced software tools for procedural planning and navigational guidance with AF of the airways for biopsy of peripheral pulmonary nodules.

METHODS

Fifty-two consecutive subjects were prospectively enrolled in the AIRWAZE study (December 2018 to October 2019). Image-guided bronchoscopic biopsy procedures were performed under general anesthesia with specific ventilation protocols in a hybrid operating room equipped with a ceiling-mounted C-arm system. Procedural planning and image-guided bronchoscopy with CBCT and AF were performed using the Airwaze investigational device.

RESULTS

A total of 58 pulmonary lesions with a median size of 19.0 mm (range 7 to 48 mm) were biopsied. The overall diagnostic yield at index procedure was 87.9% (95% CI: 77.1%-94.0%). No severe adverse events related to CBCT-guided bronchoscopy, such as pneumothorax, bleeding, or respiratory failure, were observed.

CONCLUSION

CBCT-guided bronchoscopic biopsy with augmented fluoroscopic views of the airways and target lesion for navigational guidance is technically feasible and safe. Three-dimensional image-guided navigation biopsy is associated with high navigational success and a high diagnostic yield for peripheral pulmonary nodules.

Imaging modalities during navigational bronchoscopy

INTRODUCTION

Lung nodules are commonly encountered in clinical practice. Technological advances in navigational bronchoscopy and imaging modalities have led to paradigm shift from nodule screening or follow-up to early lung cancer detection. This is due to improved nodule localization and biopsy confirmation with combined modalities of navigational platforms and imaging tools. To conduct this article, relevant literature was reviewed via PubMed from January 2014 until January 2024.

AREAS COVERED

This article highlights the literature on different imaging modalities combined with commonly used navigational platforms for diagnosis of peripheral lung nodules. Current limitations and future perspectives of imaging modalities will be discussed.

EXPERT OPINION

The development of navigational platforms improved localization of targets. However, published diagnostic yield remains lower compared to percutaneous-guided biopsy. The discordance between the actual location of lung nodule during the procedure and preprocedural CT chest is the main factor impacting accurate biopsies. The utilization of advanced imaging tools with navigation-based bronchoscopy has been shown to assist with localizing targets in real-time and improving biopsy success. However, it is important for interventional bronchoscopists to understand the strengths and limitations of these advanced imaging technologies.

Chinese expert consensus on cone-beam CT-guided diagnosis, localization and treatment for pulmonary nodules

Cone-beam computed tomography (CBCT) system can provide real-time 3D images and fluoroscopy images of the region of interest during the operation. Some systems can even offer augmented fluoroscopy and puncture guidance. The use of CBCT for interventional pulmonary procedures has grown significantly in recent years, and numerous clinical studies have confirmed the technology's efficacy and safety in the diagnosis, localization, and treatment of pulmonary nodules. In order to optimize and standardize the technical specifications of CBCT and guide its application in clinical practice, the consensus statement has been organized and written in a collaborative effort by the Professional Committee on Interventional Pulmonology of China Association for Promotion of Health Science and Technology.

Imaging in peripheral bronchoscopy

PURPOSE OF REVIEW

Historically the sampling of peripheral lung lesions via bronchoscopy has suffered from inferior diagnostic outcomes relative to transthoracic needle aspiration, and neither a successful bronchoscopic navigation nor a promising radial ultrasonographic image of one's target lesion guarantees a successful biopsy. Fortunately, many of peripheral bronchoscopy's shortcomings - including an inability to detect and compensate for computed tomography (CT)-body divergence, and the absence of tool-in-lesion confirmation - are potentially remediable through the use of improved intraprocedural imaging techniques.

RECENT FINDINGS

Recent advances in intraprocedural imaging, including the integration of cone beam CT, digital tomosynthesis, and augmented fluoroscopy into bronchoscopic procedures have yielded promising results. These advanced imaging modalities may improve the outcomes of peripheral bronchoscopy through the detection and correction of navigational errors, CT-body divergence, and malpositioned biopsy instruments.

SUMMARY

The incorporation of advanced imaging is an essential step in the improvement of peripheral bronchoscopic procedures.

Radiation dose of cone beam CT combined with shape sensing robotic assisted bronchoscopy for the evaluation of pulmonary lesions: an observational single center study

Background

Shape sensing robotic-assisted bronchoscopy (ssRAB) combined with radial endobronchial ultrasound (r-EBUS) and cone beam computed tomography (CBCT) is a newer diagnostic modality for the evaluation of pulmonary lesions. There is limited data describing the radiation dose of CBCT combined with ssRAB. The purpose of this study was to describe the technical factors associated with the use of CBCT combined with ssRAB to biopsy pulmonary lesions.

Methods

We conducted a single center, prospective observational study of patients undergoing ssRAB combined with fixed CBCT for the pulmonary lesion biopsy. We report our patient demographics, and pulmonary lesion and procedure characteristics.

Results

A total of 241 ssRAB procedures were performed to biopsy 269 pulmonary lesions. The mean lesion size was measured in the following dimensions: anteroposterior (18.0±8.8 mm), transverse (17.2±10.5 mm), and craniocaudal (17.7±10.2 mm). A mean of 1.5±0.7 (median: 1, range: 1-4) CBCT spins were performed. The mean total fluoroscopy time (FT) was 5.6±2.9 minutes. The mean radiation dose of cumulative air kerma (CAK) was 63.5±46.7 mGy and the mean cumulative dose area product (DAP) was 22.6±16.0 Gy·cm2. Diagnostic yield calculated based on results at index bronchoscopy was 85.9%. There was a low rate of complications with 8 pneumothoraces (3.3%), 5 (2.1%) of which required chest tube placement.

Conclusions

We describe the use of ssRAB combined with CBCT to biopsy pulmonary lesions as a safe diagnostic modality with relatively low radiation dose that is potentially comparable to other image guided sampling modalities. Bronchoscopists should be cognizant of the radiation use during the procedure for both patient and staff safety.

Advanced Imaging for Robotic Bronchoscopy: A Review

Recent advances in navigational platforms have led bronchoscopists to make major strides in diagnostic interventions for pulmonary parenchymal lesions. Over the last decade, multiple platforms including electromagnetic navigation and robotic bronchoscopy have allowed bronchoscopists to safely navigate farther into the lung parenchyma with increased stability and accuracy. Limitations persist, even with these newer technologies, in achieving a similar or higher diagnostic yield when compared to the transthoracic computed tomography (CT) guided needle approach. One of the major limitations to this effect is due to CT-to-body divergence. Real-time feedback that better defines the tool-lesion relationship is vital and can be obtained with additional imaging using radial endobronchial ultrasound, C-arm based tomosynthesis, cone-beam CT (fixed or mobile), and O-arm CT. Herein, we describe the role of this adjunct imaging with robotic bronchoscopy for diagnostic purposes, describe potential strategies to counteract the CT-to-body divergence phenomenon, and address the potential role of advanced imaging for lung tumor ablation.

Mobile Cone-Beam CT-Assisted Bronchoscopy for Peripheral Lung Lesions

Peripheral bronchoscopy with the use of thin/ultrathin bronchoscopes and radial-probe endobronchial ultrasound (RP-EBUS) has been associated with a fair diagnostic yield. Mobile cone-beam CT (m-CBCT) could potentially improve the performance of these readily available technologies. We retrospectively reviewed the records of patients undergoing bronchoscopy for peripheral lung lesions with thin/ultrathin scope, RP-EBUS, and m-CBCT guidance. We studied the performance (diagnostic yield and sensitivity for malignancy) and safety (complications, radiation exposure) of this combined approach. A total of 51 patients were studied. The mean target size was 2.6 cm (SD, 1.3 cm) and the mean distance to the pleura was 1.5 cm (SD, 1.4 cm). The diagnostic yield was 78.4% (95 CI, 67.1-89.7%), and the sensitivity for malignancy was 77.4% (95 CI, 62.7-92.1%). The only complication was one pneumothorax. The median fluoroscopy time was 11.2 min (range, 2.9-42.1) and the median number of CT spins was 1 (range, 1-5). The mean Dose Area Product from the total exposure was 41.92 Gy·cm² (SD, 11.35 Gy·cm²). Mobile CBCT guidance may increase the performance of thin/ultrathin bronchoscopy for peripheral lung lesions in a safe manner. Further prospective studies are needed to corroborate these findings.

Endoscopic Technologies for Peripheral Pulmonary Lesions: From Diagnosis to Therapy

Peripheral pulmonary lesions (PPLs) are frequent incidental findings in subjects when performing chest radiographs or chest computed tomography (CT) scans. When a PPL is identified, it is necessary to proceed with a risk stratification based on the patient profile and the characteristics found on chest CT. In order to proceed with a diagnostic procedure, the first-line examination is often a bronchoscopy with tissue sampling. Many guidance technologies have recently been developed to facilitate PPLs sampling. Through bronchoscopy, it is currently possible to ascertain the PPL's benign or malignant nature, delaying the therapy's second phase with radical, supportive, or palliative intent. In this review, we describe all the new tools available: from the innovation of bronchoscopic instrumentation (e.g., ultrathin bronchoscopy and robotic bronchoscopy) to the advances in navigation technology (e.g., radial-probe endobronchial ultrasound, virtual navigation, electromagnetic navigation, shape-sensing navigation, cone-beam computed tomography). In addition, we summarize all the PPLs ablation techniques currently under experimentation. Interventional pulmonology may be a discipline aiming at adopting increasingly innovative and disruptive technologies.