Decellularized Rat Lung Scaffolds Using Sodium Lauryl Ether Sulfate for Tissue Engineering

Establishment of 3D cell culture systems with decellularized lung-derived extracellular matrix hydrogel scaffold

Decellularized tissue hydrogels, especially that mimic the native tissue, have a high potential for tissue engineering, three-dimensional (3D) cell culture, bioprinting, and therapeutic agent encapsulation due to their excellent biocompatibility and ability to facilitate the growth of cells. It is important to note that the decellularization process significantly affects the structural integrity and properties of the extracellular matrix, which in turn shapes the characteristics of the resulting hydrogels at the macromolecular level. Therefore, our study aims to identify an effective chemical decellularization method for sheep lung tissue, using a mixing/agitation technique with a range of detergents, including commonly [Sodium dodecyl sulfate (SDS), Triton X-100, and 3-((3-cholamidopropyl) dimethylammonio)-1-propanesulfonate] (CHAPS), and rarely used (sodium cholate hydrate, NP-40, and 3-[N,N-Dimethyl(3-myristoylaminopropyl)ammonio]propanesulfonate) (ASB-14). After the effectiveness of the used detergents on decellularization was determined by histological and biochemical methods, lung derived decellularized extracellular matrix was converted into hydrogel. We investigated the interactions between lung cells and decellularized extracellular matrix using proliferation assay, scanning electron microscopy, and immunofluorescence microscopy methods on BEAS-2B cells in air-liquid interface. Notably, this study emphasizes the effectiveness of ASB-14 in the decellularization process, showcasing its crucial role in removing cellular components while preserving vital extracellular matrix biological macromolecules, including glycosaminoglycans, collagen, and elastin. The resulting hydrogels demonstrated favorable mechanical properties and are compatible with both cell-cell and cell-extracellular matrix interactions.

Effect of radiation sterilization on the ability to induce adipose regeneration in vivo in decellularized adipose-derived matrix

BACKGROUND

Decellularized adipose-derived matrix (DAM), a biological scaffold that can induce adipose regeneration. The balance between its sterilization efficiency and its ability to maintain in situ adipose regeneration should be considered in terminal sterilization. The purpose of this study was to investigate the effects of radiation sterilization of cobalt-60 (60 Co)with different doses on adipogenesis induced by different forms of DAM, so as to reduce radiation dose under the premise of safe and effective sterilization and ensure adipogenesis induced by DAM in vivo.

METHODS

High dose (25 kGy) and low dose (5 kGy) radiation were used to sterilize freeze-dried and wet DAM, respectively. The sterilization efficiency, macro and micro characteristics, mechanical and mechanical properties of DAM were compared, and then implanted into the immunocompromised mice to evaluate the adipose regeneration.

RESULTS

Under the two radiation doses, no microbial growth was found in the freeze-dried and wet DAM sterility tests, and no significant changes were observed in the macro and micro structures. In terms of mechanical properties, the elastic modulus of high dose freeze-dried DAM decreased significantly (p < 0.001). In vivo animal experiments, the freeze-dried DAM irradiated with high dose almost completely lost its function of adipogenesis in vivo. Although the wet DAM irradiated with high dose could induce fat regeneration in the early stage, the adipocyte deformation and atrophy appeared in the later stage. The freeze-dried and wet DAM after low dose irradiation was similar to the wet DAM without irradiation in the blank control, which could maintain excellent adipogenic and angiogenic functions in vivo.

CONCLUSION

High dose 60 Co irradiation can completely destroy the ability of freeze-dried DAM to induce adipose regeneration in situ, while low dose irradiation (5 kGy) can effectively sterilize the DAM without damaging in vivo induced adipose regeneration. Radiation has more damage to freeze-dried DAM than wet DAM in adipogenesis properties.

Kidney ECM Pregel Nanoarchitectonics for Microarrays to Accelerate Harvesting Gene-Edited Porcine Primary Monoclonal Spheres

One of the key steps of using CRISPR/Cas9 to obtain gene-edited cells used in generating gene-edited animals combined with somatic cell nuclear transplantation (SCNT) is to harvest monoclonal cells with genetic modifications. However, primary cells used as nuclear donors always grow slowly and fragile after a series of gene-editing operations. The extracellular matrix (ECM) formulated directly from different organs comprises complex proteins and growth factors that can improve and regulate the cellular functions of primary cells. Herein, sodium lauryl ether sulfate (SLES) detergent was first used to perfuse porcine kidney ECM, and the biological properties of the kidney ECM were optimized. Then, we used a porcine kidney ECM pregel to pattern the microarray and developed a novel strategy to shorten the time of obtaining gene-edited monoclonal cell spheroids with low damage in batches. Our results showed that the SLES-perfused porcine kidney ECM pregel displayed superior biological activities in releasing growth factors and promoting cell proliferation. Finally, combined with microarray technology, we quickly obtained monoclonal cells in good condition, and the cells used as nuclear donors to construct recombinant embryos showed a significantly higher success rate than those of the traditional method. We further successfully produced genetically edited pigs.

An overview of post transplantation events of decellularized scaffolds

Regenerative medicine and tissue engineering are reasonable techniques for repairing failed tissues and could be a suitable alternative to organ transplantation. One of the most widely used methods for preparing bioscaffolds is the decellularization procedure. Although cell debris and DNA are removed from the decellularized tissues, important compositions of the extracellular matrix including proteins, proteoglycans, and glycoproteins are nearly preserved. Moreover, the obtained scaffolds have a 3-dimensional (3D) structure, appropriate naïve mechanical properties, and good biocompatibility. After transplantation, different types of host cells migrate to the decellularized tissues. Histological and immunohistochemical assessment of the different bioscaffolds after implantation reveals the migration of parenchymal cells, angiogenesis, as well as the invasion of inflammatory and giant foreign cells. In this review, the events after transplantation including angiogenesis, scaffold degradation, and the presence of immune and tissue-specific progenitor cells in the decellularized scaffolds in various hosts, are discussed.

Decellularization for the retention of tissue niches

Decellularization of natural tissues to produce extracellular matrix is a promising method for three-dimensional scaffolding and for understanding microenvironment of the tissue of interest. Due to the lack of a universal standard protocol for tissue decellularization, recent investigations seek to develop novel methods for whole or partial organ decellularization capable of supporting cell differentiation and implantation towards appropriate tissue regeneration. This review provides a comprehensive and updated perspective on the most recent advances in decellularization strategies for a variety of organs and tissues, highlighting techniques of chemical, physical, biological, enzymatic, or combinative-based methods to remove cellular contents from tissues. In addition, the review presents modernized approaches for improving standard decellularization protocols for numerous organ types.

The Potential Contribution of Biopolymeric Particles in Lung Tissue Regeneration of COVID-19 Patients

The lung is a vital organ that houses the alveoli, which is where gas exchange takes place. The COVID-19 illness attacks lung cells directly, creating significant inflammation and resulting in their inability to function. To return to the nature of their job, it may be essential to rejuvenate the afflicted lung cells. This is difficult because lung cells need a long time to rebuild and resume their function. Biopolymeric particles are the most effective means to transfer developing treatments to airway epithelial cells and then regenerate infected lung cells, which is one of the most significant symptoms connected with COVID-19. Delivering biocompatible and degradable natural biological materials, chemotherapeutic drugs, vaccines, proteins, antibodies, nucleic acids, and diagnostic agents are all examples of these molecules' usage. Furthermore, they are created by using several structural components, which allows them to effectively connect with these cells. We highlight their most recent uses in lung tissue regeneration in this review. These particles are classified into three groups: biopolymeric nanoparticles, biopolymeric stem cell materials, and biopolymeric scaffolds. The techniques and processes for regenerating lung tissue will be thoroughly explored.

A tissue-engineered, decellularized, connective tissue membrane for allogeneic arterial patch implantation

BACKGROUND

We have previously applied in vivo tissue-engineered vascular grafts constructed in patients' subcutaneous spaces. However, since the formation of these vascular grafts depends on host health, their application is challenging in patients with suppressed regenerative ability. Therefore, the allogeneic implantation of grafts from healthy donors needs to be evaluated. This study aimed to fabricate allogeneic cardiovascular grafts in animals.

MATERIALS AND METHODS

Silicone rod molds were implanted into subcutaneous pouches in dogs; the implants, along with surrounding connective tissues, were harvested after four weeks. Tubular connective tissues were decellularized and stored before they were cut open, trimmed to elliptical sheets, and implanted into the common carotid arteries of another dog as vascular patches (n = 6); these were resected and histologically evaluated at 1, 2, and 4 weeks after implantation.

RESULTS

No aneurysmal changes were observed by echocardiography. Histologically, we observed neointima formation on the luminal graft surface and graft wall cell infiltration. At 2 and 4 weeks after implantation, α-SMA-positive cells were observed in the neointima and graft wall. At 4 weeks after implantation, the endothelial lining was observed at the grafts' luminal surfaces.

CONCLUSION

Our data suggest that decellularized connective tissue membranes can be prepared and stored for later use as allogeneic cardiovascular grafts.

Different grinding speeds affect induced regeneration capacity of human treated dentin matrix

Human-treated dentin matrix (hTDM) is a biomaterial scaffold, which can induce implant cells to differentiate into odontoblasts and then form neo-dentin. However, hTDM with long storage or prepared by high-speed handpiece would not to form neo-dentin. In this research, we developed two fresh hTDM with different grinding speeds, which were low-speed hTDM (LTDM) with maximum speed of 500 rpm and high-speed hTDM (HTDM) with a speed of 3,80,000 rpm. Here, we aim to understand whether there were induced regeneration capacity differences between LTDM and HTDM. Scanning electron microscope showed that DFCs grew well on both materials, but the morphology of DFCs and the extracellular matrix was different. Especially, the secreted extracellular matrixes on the inner surface of LTDM were regular morphology and ordered arrangement around the dentin tubules. The transcription-quantitative polymerase chain reaction (qRT-PCR), western blot and immunofluorescence assay showed that the dentin markers DSPP and DMP-1 were about 2× greater in DFCs induced by LTDM than by HTDM, and osteogenic marker BSP was about 2× greater in DFCs induced by HTDM than by LTDM. Histological examinations of the harvested grafts observed the formation of neo-tissue were different, and there were neo-dentin formed on the inner surface of LTDM and neo-cementum formed on the outer surface of HTDM. In summary, it found that the induction abilities of LTDM and HTDM are different, and the dentin matrix is directional. This study lays a necessary foundation for searching the key factors of dentin regeneration in future.

The decellularized ovary as a potential scaffold for maturation of preantral ovarian follicles of prepubertal mice

ABBREVIATIONS

GAG: glycosaminoglycan; ECM: extracellular matrix; 2D: two-dimensional; E2: estradiol; P4: progesterone; BMP15: bone morphogenetic protein 15; GDF9: growth differentiation factor 9; ZP2: zona pellucida 2; Gdf9: growth/differentiation factor-9; Bmp6: bone morphogenetic protein 6; Bmp15: bone morphogenetic protein 15.

Decellularization of kidney tissue: comparison of sodium lauryl ether sulfate and sodium dodecyl sulfate for allotransplantation in rat

An automatic decellularization device was developed to perfuse and decellularize male rats' kidneys using both sodium lauryl ether sulfate (SLES) and sodium dodecyl sulfate (SDS) and to compare their efficacy in kidney decellularization and post-transplantation angiogenesis. Kidneys were perfused with either 1% SDS solution for 4 h or 1% SLES solution for 6 h. The decellularized scaffolds were stained with hematoxylin and eosin, periodic acid Schiff, Masson's trichrome, and Alcian blue to determine cell removal and glycogen, collagen, and glycosaminoglycan contents, respectively. Moreover, scanning electron microscopy was performed to evaluate the cell removal and preservation of microarchitecture of both SDS and SLES scaffolds. Additionally, DNA quantification assay was applied for all groups in order to measure residual DNA in the scaffolds and normal kidney. In order to demonstrate biocompatibility of the decellularized scaffolds, human umbilical cord mesenchymal stromal/stem cells (hUC-MSCs) were seeded on the scaffolds. In addition, the allotransplantation was performed in back muscle and angiogenesis was evaluated. Complete cell removal in both SLES and SDS groups was observed in scanning electron microscopy and DNA quantification assays. Moreover, the extracellular matrix (ECM) architecture of rat kidney in the SLES group was significantly preserved better than the SDS group. The hUC-MSCs were successfully migrated from the cell culture plate surface into the SDS and SLES decellularized scaffolds. The formation of blood vessels was observed in the kidney in both SLES and SDS decellularized kidneys. The better preservation of ECM than SDS introduces SLES as the solvent of choice for kidney decellularization.

Decellularization of porcine whole lung to obtain a clinical-scale bioengineered scaffold

Whole-organ engineering is emerging as an alternative source for xenotransplantation in end-stage diseases. Utilization of decellularized whole lung scaffolds created by detergent perfusion is an effective strategy for organ replacement. In the current study, we attempted to decellularize porcine whole lungs to generate an optimal and reproducible decellularized matrix for future clinical use. Porcine whole lungs were decellularized via perfusion of various detergents (sodium dodecyl sulfate (SDS)/Triton X-100, sodium lauryl ether sulfate (SLES)/Triton X-100, dextrose/SDS/Triton X-100 and dextrose/SLES/Triton X-100) through the pulmonary artery and bronchus of the lung. The decellularized scaffolds were evaluated for decellularization efficiency, extracellular matrix (ECM) component preservation, xenoantigen removal and compatibility. The resulting lung scaffolds obtained from treatment with the dextrose/SLES/Triton X-100 cocktail showed minimal residual cellular components and xenoantigens, including DNA and protein, and good preservation of ECM composition. Evaluation of the porcine lung ECM by specific staining and immunofluorescence confirmed that the three-dimensional ultrastructure of the ECM was noticeably preserved in the SLES-treated groups. In addition, the decellularized lung scaffolds originating from the dextrose/SLES/Triton X-100 cocktail supported cell adhesion and growth. In summary, the novel detergent SLES alleviated the damage to retain a better-preserved ECM than SDS. Sequential Triton X-100 perfusion eliminated SLES. Moreover, performing dextrose perfusion in advance further protected scaffold components, especially collagen. We developed an optimal dextrose/SLES/Triton X-100 cocktail method that can be used for the decellularization of porcine whole lung to obtain a clinical-scale bioengineered scaffold.

Construction and cryopreservation of an artificial ovary in cancer patients as an element of cancer therapy and a promising approach to fertility restoration

The proportion of cancer patients that survive is increasing because of improvements in cancer therapy. However, some cancer treatments, such as chemo- and radio-therapies, can cause considerable damage to reproductive function. The issue of fertility is paramount for women of childbearing age once they are cured from cancer. For those patients with prepubertal or haematogenous cancer, the possibilities of conventional fertility treatments, such as oocyte or embryo cryopreservation and transplantation, are limited. Moreover, ovarian tissue cryopreservation as an alternative to fertility preservation has limitations, with a risk of re-implanting malignant cells in patients who have recovered from potentially fatal malignant disease. One possible way to restore fertility in these patients is to mimic artificially the function of the natural organ, the ovary, by grafting isolated follicles embedded in a biological scaffold to their native environment. Construction and cryopreservation of an artificial ovary might offer a safer alternative option to restore fertility for those who cannot benefit from traditional fertility preservation techniques. This review considers the protocols for constructing an artificial ovary, summarises advances in the field with potential clinical application, and discusses future trends for cryopreservation of these artificial constructions.

Sterilization and disinfection methods for decellularized matrix materials: Review, consideration and proposal

Sterilization is the process of killing all microorganisms, while disinfection is the process of killing or removing all kinds of pathogenic microorganisms except bacterial spores. Biomaterials involved in cell experiments, animal experiments, and clinical applications need to be in the aseptic state, but their physical and chemical properties as well as biological activities can be affected by sterilization or disinfection. Decellularized matrix (dECM) is the low immunogenicity material obtained by removing cells from tissues, which retains many inherent components in tissues such as proteins and proteoglycans. But there are few studies concerning the effects of sterilization or disinfection on dECM, and the systematic introduction of sterilization or disinfection for dECM is even less. Therefore, this review systematically introduces and analyzes the mechanism, advantages, disadvantages, and applications of various sterilization and disinfection methods, discusses the factors influencing the selection of sterilization and disinfection methods, summarizes the sterilization and disinfection methods for various common dECM, and finally proposes a graphical route for selecting an appropriate sterilization or disinfection method for dECM and a technical route for validating the selected method, so as to provide the reference and basis for choosing more appropriate sterilization or disinfection methods of various dECM.

•

Asepsis is the prerequisite for the experiment and application of biomaterials.

•

Sterilization or disinfection affects physic-chemical properties of biomaterials.

•

Mechanism, advantages and disadvantages of sterilization or disinfection methods.

•

Factors influencing the selection of sterilization or disinfection methods.

•

Selection of sterilization or disinfection methods for decellularized matrix.

Comparative assessment of the efficiency of various decellularization agents for bone tissue engineering

Bone regeneration can be possible through grafts or engineered bone replacement when bone defects are larger than the critical size. Decellularized bone extracellular matrix (ECM) is an alternative that is able to accelerate tissue regeneration, while decellularization protocols influence engineered bone quality. The objective of this study was to compare the quality of decellularized bone produced through different methods. Four decellularization methods were employed using (a) sodium lauryl ether sulfate (SLES), (b) sodium dodecyl sulfate (SDS) 0.5%, (c) SDS 1% and (d) trypsin/EDTA. All samples were then washed in triton X-100. DNA quantification, hematoxylin and eosin, and Hoechst staining showed that although DNA was depleted in all scaffolds, treatment with SLES led to a significantly lower DNA content. Glycosaminoglycan quantification, Raman confocal microscopy, alcian blue and PAS staining exhibited higher carbohydrate retention in the scaffolds treated with SLES and SDS 0.5%. Raman spectra, scanning electron microscopy and trichrom Masson staining showed more collagen content in SLES and SDS-treated scaffolds compared to trypsin/EDTA-treated scaffolds. Therefore, although trypsin/EDTA could efficiently decellularize the scaffolds, it washed out the ECM contents. Also, both MTT and attachment tests showed a significantly higher cell viability in SLES-treated scaffolds. Raman spectra revealed that while the first washing procedure did not remove SLES traces in the scaffolds, excessive washing reduced ECM contents. In conclusion, SLES and, to a lesser degree, SDS 0.5% protocols could efficiently preserve ultrastructure and ECM constituents of decellularized bone tissue and can thus be suggested as nontoxic and safe protocols for bone regeneration.

Decellularized liver transplant could be recellularized in rat partial hepatectomy model

In situ recellularization of the liver decellularized scaffold is a potential therapeutic alternative for liver transplantation. We aimed to develop an in situ procedure for recellularization of the rat liver using sodium lauryl ether sulfate (SLES) compared with Triton X-100/SDS. Rat liver specimens were rinsed with PBS, decellularized with either Triton X-100/SDS or SLES, and finally rinsed by distilled water. The efficiency of decellularized liver scaffolds was evaluated by histological, confocal Raman microscopy, histochemical staining, and DNA quantification assessments. Finally, in vivo studies were done to assess the biocompatibility of the liver scaffold by serum biochemical parameters and the recellularization capacity by histological and immunohistochemistry staining. Findings confirmed the preservation of extracellular matrix (ECM) components such as reticular, collagen, glycosaminoglycans, and neutral carbohydrates in both Triton X-100/SDS- and SLES-treated livers. Hoechst, feulgen, Hematoxylin and eosin, and DNA quantification assessments confirmed complete genetic content removal. The serological parameters showed no adverse impact on the liver functions. Transplantation of SLES-treated cell-free decellularized liver showed extensive neovascularization along with migration of the fibrocytes and adipocytes and some immune cells. Also, immunohistochemical staining showed that the oval cells, stellate cells, cholangiocytes and hepatocytes invaded extensively into the graft. It is concluded that SLES can be considered as a promising alternative in the liver decellularization process, and the transplanted decellularized liver can appropriately be revascularized and regenerated.

Human breast cancer decellularized scaffolds promote epithelial-to-mesenchymal transitions and stemness of breast cancer cells in vitro

Breast cancer, with unsatisfactory survival rates, is the leading cause of cancer-related death in women worldwide. Recent advances in the genetic basis of breast cancer have benefitted the development of gene-based medicines and therapies. Tissue engineering technologies, including tissue decellularizations and reconstructions, are potential therapeutic alternatives for cancer research and tissue regeneration. In our study, human breast cancer biopsies were decellularized by a detergent technique, with sodium lauryl ether sulfate (SLES) solution, for the first time. And the decellularization process was optimized to maximally maintain tissue microarchitectures and extracellular matrix (ECM) components with minimal DNA compounds preserved. Histology analysis and DNA quantification results confirmed the decellularization effect with maximal genetic compounds removal. Quantification, immunofluorescence, and histology analyses demonstrated better preservation of ECM components in 0.5% SLES-treated scaffolds. Scaffolds seeded with MCF-7 cells demonstrated the process of cell recellularization in vitro, with increased cell migration, proliferation, and epithelial-to-mesenchymal transition (EMT) process. When treated with 5-fluorouracil, the expressions of stem cell markers, including Oct4, Sox2, and CD49F, were maximally maintained in the recellularized scaffold with decreased apoptosis rates compared with monolayer cells. These results showed that the decellularized breast scaffold model with SLES treatments would help to simulate the pathogenesis of breast cancer in vitro. And we hope that this model could further accelerate the development of effective therapies for breast cancer and benefit drug screenings.

Decellularized human ovarian scaffold based on a sodium lauryl ester sulfate (SLES)-treated protocol, as a natural three-dimensional scaffold for construction of bioengineered ovaries

BACKGROUND

The increasing number of patients with ovarian insufficiency due to autoimmune disorders, genetic predisposition, or iatrogenic effects of treatment such as cancer therapies necessitates an urgent measure to find a safe and transplantable alternative ovary. A bioengineered ovary is one of the strategies on which the researchers have recently been working. An engineered ovary should be able to mimic the natural ovary aspects. Recent studies suggest that the decellularized organ-specific extracellular matrix-based scaffolds can serve as a native niche to bioengineering artificial organs. Therefore, we established a human decellularized ovarian scaffold based on a sodium lauryl ester sulfate (SLES)-treated process, as an optimized protocol.

METHODS

The human ovary samples were decellularized with 1% SLES for 48 h followed by DNase I in PBS for 24 h, and then thoroughly rinsed in PBS to remove the cell remnants and chemical reagents. Efficient cell removal was confirmed by DNA content analysis, hematoxylin and eosin, and Hoechst staining. Preservation assessment of the extracellular matrix structures was performed by immunohistochemistry, histological staining, and scanning electron microscopy. An MTT test was done to assess the in vitro scaffold's cytocompatibility, and finally in vivo studies were performed to evaluate the biocompatibility, bioactivity, and secretion functions of the ovarian grafts made of primary ovarian cells (POCs) on the decellularized scaffolds.

RESULTS

Evidence provided by SEM, histochemical, and immunohistochemical analyses showed that the ovarian extracellular matrix was preserved after decellularization. Moreover, MTT test indicated the suitable cytocompatibility of the scaffolds. The in vivo assessment showed that the POCs kept their viability and bioactivity, and reconstructed the primordial or primary follicle-like structures within the scaffolds after transplantation. Immunostaining characterized somatic cells that were capable of expressing steroid hormone receptors; also, as a marker of granulosa cell, inhibin-α immunostaining demonstrated these cells within the grafts. Additionally, hormone assessment showed that serum estradiol and progesterone levels were significantly higher in ovariectomized rats with ovarian cells-seeded grafts than those with or without decellularized scaffold grafts.

CONCLUSIONS

A human ovary-specific scaffold based on a SLES-decellularized protocol as a biomimicry of the natural ovarian niche can be an ideal scaffold used to reconstruct the ovary.