AvalonElite Double Lumen Cannula for Total Cavopulmonary Assist in Failing Fontan Sheep Model with Valved Extracardiac Conduit

Validating the Concept of Mechanical Circulatory Support with a Rotary Blood Pump in the Inferior Vena Cava in an Ovine Fontan Model

Right-sided mechanical support of the Fontan circulation by existing devices has been compounded by the cross-sectional design of vena cava anastomosis to both pulmonary arteries. Our purpose was to investigate whether increasing inferior vena cava (IVC) flow with a rotary blood pump in the IVC only in an ovine animal model of Fontan would lead to acceptable superior vena cava (SVC) pressure. To achieve this, a Fontan circulation was established in four female sheep by anastomosing the SVC to the main pulmonary artery (MPA) and by interposing a Dacron graft between the IVC and the MPA. A rotary blood pump was then introduced in the graft, and the effect of incremental flows was observed at increasing flow regimen. Additionally, to stimulate increased pulmonary resistance, the experience was repeated in each animal with the placement of a restrictive band on the MPA distally to the SVC and Dacron graft anastomosis. Circulatory support of IVC flow alone increased the systemic cardiac output significantly, both with and without banding, indicating the feasibility of mechanical support of the Fontan circulation by increasing the flow only in the inferior vena cava. The increase in SVC pressure remained within acceptable limits, indicating the potential effectiveness of this mode of support. The findings suggest that increasing the flow only in the inferior vena cava is a feasible method for mechanical support of the Fontan circulation, potentially leading to an increase in cardiac output with acceptable increases in superior vena cava pressure.

Study on the optimal elastic modulus of flexible blades for right heart assist device supporting patients with single-ventricle physiologies

Background

Patients with single-ventricle physiologies continue to experience insufficient circulatory power after undergoing palliative surgeries. This paper proposed a right heart assist device equipped with flexible blades to provide circulatory assistance for these patients. The optimal elastic modulus of the flexible blades was investigated through numerical simulation.

Methods

A one-way fluid-structure interaction (FSI) simulation was employed to study the deformation of flexible blades during rotation and its impact on device performance. The process began with a computational fluid dynamics (CFD) simulation to calculate the blood pressure rise and the pressure on the blades' surface. Subsequently, these pressure data were exported for finite element analysis (FEA) to compute the deformation of the blades. The fluid domain was then recreated based on the deformed blades' shape. Iterative CFD and FEA simulations were performed until both the blood pressure rise and the blades' shape stabilized. The blood pressure rise, hemolysis risk, and thrombosis risk corresponding to blades with different elastic moduli were exhaustively evaluated to determine the optimal elastic modulus.

Results

Except for the case at 8,000 rpm with a blade elastic modulus of 40 MPa, the pressure rise associated with flexible blades within the studied range (rotational speeds of 4,000 rpm and 8,000 rpm, elastic modulus between 10 MPa and 200 MPa) was lower than that of rigid blades. It was observed that the pressure rise corresponding to flexible blades increased as the elastic modulus increased. Additionally, no significant difference was found in the hemolysis risk and thrombus risk between flexible blades of various elastic moduli and rigid blades.

Conclusion

Except for one specific case, deformation of the flexible blades within the studied range led to a decrease in the impeller's functionality. Notably, rotational speed had a more significant impact on hemolysis risk and thrombus risk compared to blade deformation. After a comprehensive analysis of blade compressibility, blood pressure rise, hemolysis risk, and thrombus risk, the optimal elastic modulus for the flexible blades was determined to be between 40 MPa and 50 MPa.

Percutaneous Cavopulmonary Assist: From Design to 96 Hour Survival in Lethal Cavopulmonary Failure Sheep

We are developing a clinically practical percutaneous double lumen cannula (DLC)-based cavopulmonary assist (CPA) system to support failing Fontan patients. In this study, our CPA DLC was redesigned for even blood flow, minimal recirculation, and easy insertion/deployment. After bench testing, this new CPA system was evaluated for 4 hours (n = 10) and 96 hours (n = 5) in our clinically relevant lethal cavopulmonary failure (CPF) sheep model for ease of cannulation/deployment, reversal of CPF hemodynamics/end-organ hypoperfusion, and durability/biocompatibility. Cavopulmonary failure was achieved in all sheep. All DLCs were successfully inserted/deployed into Fontan anatomy. Cavopulmonary assist reversed CPF with normalized central venous pressure and cardiac output. All survival sheep were ambulatory with normal eating/drinking. One sheep was euthanized after 6 hours from cannula kinking, and one sheep died of hypokalemia after 8 hours. Three sheep survived 96 hours with normal hemodynamics. Free hemoglobin was only 3.7 ± 1.2 mg/dl at 96 hours, indicating negligible hemolysis. Creatinine, blood urea nitrogen, and lactate increased from hypoperfusion but normalized by 72 hours CPA. Necropsy showed only a small, immobilized thrombus ring at umbrella attachment to DLC. Our DLC-based system provided total ambulatory CPA in a lethal CPF sheep model with 96 hour survival and complete reversal of hemodynamics and end-organ hypoperfusion.

Failing Fontan cardiovascular support: Review

BACKGROUND

Although all congenital heart defects (CHD) present unique challenges, univentricular CHD are especially challenging given the difficulty of passively perfusing pulmonary blood flow. Three surgical procedures are required within the first years of life, with the final completing a Fontan circulation in which the inferior vena cava is connected to the pulmonary artery and previously connected superior vena cava. This allows passive venous return to the pulmonary circulation then flow into the single ventricle for systemic circulation.

METHODS

Although a Fontan provides successful palliation for two to three decades, many complications can arise as pulmonary resistance must remain low to allow adequate forward flow. Eventually, the failing Fontan circulation requires temporary support as the patient awaits a heart transplant. We reviewed PubMed, Google Scholar, and U. Kentucky library for different techniques evaluated to support a failing Fontan circulation.

RESULTS

Multiple technologies have been developed as a bridge to transplant to decrease morbidity. Innovative types of extracorporeal membrane oxygenation, ventricular assist devices, and total artificial hearts have been attempted in laboratory settings as well as in Fontan patients with varying degrees of success. This article emphasizes the strengths and weaknesses of each technology in the context of Fontan physiology.

CONCLUSION

The end game for these patients remains a heart transplant. Without easy access to donors, each of the options discussed is a potential bridge to limit morbidity and mortality until a suitable donor heart becomes available.

Target Flow-Pressure Operating Range for Designing a Failing Fontan Cavopulmonary Support Device

Fontan operation as the current standard of care for the palliation of single ventricle defects results in significant late complications. Using a mechanical circulatory device for the right circulation to serve the function of the missing subpulmonary ventricle could potentially stabilize the failing Fontan circulation. This study aims to elucidate the hydraulic operating regions that should be targeted for designing cavopulmonary blood pumps. By integrating numerical analysis and available clinical information, the interaction of the cavopulmonary support via the IVC and full assist configurations with a wide range of simulated adult failing scenarios was investigated; with IVC and full assist corresponding to the inferior venous return or the entire venous return, respectively, being routed through the device. We identified the desired hydraulic operating regions for a cavopulmonary assist device by clustering all head pressures and corresponding pump flows that result in hemodynamic improvement for each simulated failing Fontan physiology. Results show that IVC support can produce beneficial hemodynamics in only a small fraction of failing Fontan scenarios. Cavopulmonary assist device could increase cardiac index by 35% and decrease the inferior vena cava pressure by 45% depending on the patient's pre-support hemodynamic state and surgical configuration of the cavopulmonary assist device (IVC or full support). The desired flow-pressure operating regions we identified can serve as the performance criteria for designing cavopulmonary assist devices as well as evaluating off-label use of commercially available left-side blood pumps for failing Fontan cavopulmonary support.