Design Concepts and Principle of Operation of the HeartWare Ventricular Assist System

A Computational Investigation of the Effects of Temporal Synchronization of Left Ventricular Assist Device Speed Modulation with the Cardiac Cycle on Intraventricular Hemodynamics

Patients with advanced heart failure are implanted with a left ventricular assist device (LVAD) as a bridge-to-transplantation or destination therapy. Despite advances in pump design, the risk of stroke remains high. LVAD implantation significantly alters intraventricular hemodynamics, where regions of stagnation or elevated shear stresses promote thrombus formation. Third generation pumps incorporate a pulsatility mode that modulates rotational speed of the pump to enhance in-pump washout. We investigated how the timing of the pulsatility mode with the cardiac cycle affects intraventricular hemodynamic factors linked to thrombus formation. Computational fluid dynamics simulations with Lagrangian particle tracking to model platelet behavior in a patient-specific left ventricle captured altered intraventricular hemodynamics due to LVAD implantation. HeartMate 3 incorporates a pulsatility mode that modulates the speed of the pump every two seconds. Four different timings of this pulsatility mode with respect to the cardiac cycle were investigated. A strong jet formed between the mitral valve and inflow cannula. Blood stagnated in the left ventricular outflow tract beneath a closed aortic valve, in the near-wall regions off-axis of the jet, and in a large counterrotating vortex near the anterior wall. Computational results showed good agreement with particle image velocimetry results. Synchronization of the pulsatility mode with peak systole decreased stasis, reflected in the intraventricular washout of virtual contrast and Lagrangian particles over time. Temporal synchronization of HeartMate 3 pulsatility with the cardiac cycle reduces intraventricular stasis and could be beneficial for decreasing thrombogenicity.

Multiobjective Optimization of Rotodynamic Blood Pumps: The Use Case of a Cavopulmonary Assist Device

Comprehensive optimization of rotodynamic blood pumps (RBPs) requires the consideration of three partially conflicting objectives: size, hemocompatibility, and motor efficiency. Optimizing these individual objectives independently, the potential of multiobjective optimizations often remains untapped. This study aimed at the multiobjective optimization of an RBP for cavopulmonary support accounting for all three objectives simultaneously. Hydraulic and electromagnetic design spaces were characterized using computational fluid dynamics and computational electromagnetics, respectively. Design variables included secondary flow gap widths, impeller diameters, and stator heights. The size objective encompassed the RBP widths and heights, the hemocompatibility objective was a weighted composite measure of well-established metrics, and the motor objective was determined by motor losses. Multiobjective optimization was performed through Pareto analysis. 81 designs were considered, and 21 Pareto-optimal designs were identified. The Pareto analysis indicated that hemocompatibility performance could be improved by 72.4% with a concomitant 1.5% reduction in the baseline pump volume. This, however, entailed an increase in motor losses by 0.2 W, while still meeting design requirements, with maximum local temperature rises remaining below 0.4 K. The multiobjective optimization led to a Pareto front, demonstrating the feasibility to improve hemocompatibility at reduced pump volume, however, at the cost of a diminished yet still acceptable motor performance.

Evaluation of the Hemocompatibility of the Direct Oral Anticoagulant Apixaban in Left Ventricular Assist Devices: The DOAC LVAD Study

BACKGROUND

Patients receiving left ventricular assist device (LVAD) support require long-term anticoagulation to reduce the risk of thromboembolic complications. Apixaban is a direct oral anticoagulant that has become first-line therapy; however, its safety in LVAD recipients has not been well described.

OBJECTIVES

This study sought to investigate whether, in patients with a fully magnetically levitated LVAD, treatment with apixaban would be feasible and comparable with respect to safety and freedom from the primary composite outcome of death or major hemocompatibility-related adverse events (HRAEs) (stroke, device thrombosis, major bleeding, aortic root thrombus, and arterial non-central nervous system thromboembolism) as compared with treatment with warfarin.

METHODS

The DOAC LVAD (Evaluation of the Hemocompatibility of the Direct Oral Anti-Coagulant Apixaban in Left Ventricular Assist Devices) trial was a phase 2, open label trial of LVAD recipients randomized 1:1 to either apixaban 5 mg twice daily or warfarin therapy. All patients were required to take low-dose aspirin. Patients were followed up for 24 weeks to evaluate the primary composite outcome.

RESULTS

A total of 30 patients were randomized: 14 patients to warfarin and 16 patients to apixaban. The median patient age was 60 years (Q1-Q3: 52-71 years), and 47% were Black patients. The median time from LVAD implantation to randomization was 115 days (Q1-Q3: 56-859 days). At 24 weeks, the primary composite outcome occurred in no patients receiving apixaban and in 2 patients (14%) receiving warfarin (P = 0.12); these 2 patients experienced major bleeding from gastrointestinal sources.

CONCLUSIONS

Anticoagulation with apixaban was feasible in patients with an LVAD without an excess of HRAEs or deaths. This study informs future pivotal clinical trials evaluating the safety and efficacy of apixaban in LVAD recipients. (Evaluation of the Hemocompatibility of the Direct Oral Anti-Coagulant Apixaban in Left Ventricular Assist Devices [DOAC LVAD]; NCT04865978).

Acute Outflow Graft Occlusion-A Novel Predictable Complication of Lysis Therapy for the Treatment of Left Ventricular Assist Device Intra-Pump Thrombosis

Lysis therapy is an established treatment option for intra-pump thrombosis of left ventricular assist devices (LVADs). In clinical routine, we observed repeated cases of acute outflow graft occlusions (OGO) associated with lysis therapy with need for urgent intervention. The aim of this investigation was to gain understanding of this observation. We screened data of 962 HeartWare ventricular assist device (HVAD) patients. One hundred twenty (13.8%) had intra-pump thromboses; 58 were treated with recombinant tissue-type plasminogen activator (rtPA). Mean age was 53.0 ± 11.1 years; 84.9% were male. In 13 (24.5%) patients, OGO occurred following rtPA-lysis. These patients showed an increase in left ventricular function (18.45% ± 12.62% to 27.73% ± 10.57%; p = 0.056), more frequent 1:1 aortic valve opening (OGO+: +36.4%; OGO-: +7.4%; p = 0.026), a decrease in LVAD pulsatility within 12 months prior intra-pump thrombosis (OGO+: -0.8 L/min [interquartile range {IQR}, -1.4 to -0.4 L/min]; OGO-: -0.3 L/min [IQR, -0.9 to 0.1 L/min]; p = 0.038) and lower HVAD flows at admission (OGO+: 6.7 L/min [IQR, 6.1-7.4 L/min]; OGO-: 8.3 L/min [IQR, 6.9-9.3 L/min]; p = 0.013), indicating a subclinical OGO prior intra-pump thrombosis. There were no differences in implantation techniques, blood parameters, and lysis strategy. Subclinical OGO represented a major risk factor for acute OGO following rtPA lysis therapy. We here propose an algorithm for risk stratification and dealing with patients presenting this first-described complication. Further research is required to confirm our results and decipher the underlying pathomechanism. http://links.lww.com/ASAIO/B97.

In Vitro Investigation of the Effect of the Timing of Left Ventricular Assist Device Speed Modulation on Intraventricular Flow Patterns

Thromboembolic events remain a common complication for left ventricular assist device (LVAD) patients. To prevent in-pump thrombosis, third-generation LVADs use speed modulation, which is not synchronized with the native left ventricle (LV) contractility. This study aims to investigate the effect of speed modulation on intraventricular flow patterns, and specifically, the impact of timing relative to pressure variations in the LV. Stereo-particle image velocimetry measurements were performed in a patient-derived LV implanted with an LVAD, for different timings of the speed modulation and speed. Speed modulation has a strong effect on instantaneous afterload and flowrate (-16% and +20%). The different timings of the speed modulation resulted in different flowrate waveforms, exhibiting different maxima (5.3-5.9 L/min, at constant average flowrate). Moreover, the timing of the speed modulation was found to strongly influence intraventricular flow patterns, specifically, stagnation areas within the LV. These experiments highlight, once more, the complex relationship between LVAD speed, hemodynamic resistance, and intraventricular pressure. Overall, this study demonstrates the importance of considering native LV contractility in future LVAD controls, to improve hemocompatibility and reduce the risk of thromboembolic complications.

Vascular Function in Continuous Flow LVADs: Implications for Clinical Practice

Left ventricular assist devices (LVADs) have been increasingly used in patients with advanced heart failure, either as a destination therapy or as a bridge to heart transplant. Continuous flow (CF) LVADs have revolutionized advanced heart failure treatment. However, significant vascular pathology and complications have been linked to their use. While the newer CF-LVAD generations have led to a reduction in some vascular complications such as stroke, no major improvement was noticed in the rate of other vascular complications such as gastrointestinal bleeding. This review attempts to provide a comprehensive summary of the effects of CF-LVAD on vasculature, including pathophysiology, clinical implications, and future directions.

The Evolution of Durable, Implantable Axial-Flow Rotary Blood Pumps

Left ventricular assist devices (LVADs) are increasingly used to treat patients with end-stage heart failure. Implantable LVADs were initially developed in the 1960s and 1970s. Because of technological constraints, early LVADs had limited durability (eg, membrane or valve failure) and poor biocompatibility (eg, driveline infections and high rates of hemolysis caused by high shear rates). As the technology has improved over the past 50 years, contemporary rotary LVADs have become smaller, more durable, and less likely to result in infection. A better understanding of hemodynamics and end-organ perfusion also has driven research into the enhanced functionality of rotary LVADs. This paper reviews from a historical perspective some of the most influential axial-flow rotary blood pumps to date, from benchtop conception to clinical implementation. The history of mechanical circulatory support devices includes improvements related to the mechanical, anatomical, and physiologic aspects of these devices. In addition, areas for further improvement are discussed, as are important future directions-such as the development of miniature and partial-support LVADs, which are less invasive because of their compact size. The ongoing development and optimization of these pumps may increase long-term LVAD use and promote early intervention in the treatment of patients with heart failure.

Left ventricular assist devices: A historical perspective at the intersection of medicine and engineering

Over the last half-century, left ventricular assist device (LVAD) technology has progressed from conceptual therapy for failed cardiopulmonary bypass weaning to an accepted destination therapy for advanced heart failure. The history of LVAD engineering is defined by an initial development phase, which demonstrated the feasibility of such an approach, to the more recent three major generations of commercial devices. In this review, we explore the engineering challenges of LVADs, how they were addressed over time, and the clinical outcomes that resulted from each major technological development. The first generation of commercial LVADs were pulsatile devices, which lacked the appropriate durability due to their number of moving components and hemocompatibility. The second generation of LVADs was defined by replacement of complex, pulsatile pumps with primarily axial, continuous-flow systems with an impeller in the blood passageway. These devices experienced significant commercial success, but the presence of excessive trauma to the blood and in-situ bearing resulted in an unacceptable burden of adverse events. Third generation centrifugal-flow pumps use magnetically suspended rotors within the pump chamber. Superior outcomes with this newest generation of devices have been observed, particularly with respect to hemocompatibility-related adverse events including pump thrombosis, with fully magnetically levitated devices. The future of LVAD engineering includes wireless charging foregoing percutaneous drivelines and more advanced pump control mechanisms, including synchronization of the pump flow with the native cardiac cycle, and varying pump output based on degree of physical exertion using sensor or advanced device-level data triggers.

HVAD to HeartMate 3 Left Ventricular Assist Device Exchange: Best Practices Recommendations

The HeartWare HVAD System (Medtronic) is a durable implantable left ventricular assist device that has been implanted in approximately 20,000 patients worldwide for bridge to transplant and destination therapy indications. In December 2020, Medtronic issued an Urgent Medical Device Communication informing clinicians of a critical device malfunction in which the HVAD may experience a delay or failure to restart after elective or accidental discontinuation of pump operation. Moreover, evolving retrospective comparative effectiveness studies of patients supported with the HVAD demonstrated a significantly higher risk of stroke and all-cause mortality when compared with a newer generation of a commercially available durable left ventricular assist device. Considering the totality of this new information on HVAD performance and the availability of an alternate commercially available device, Medtronic halted the sale and distribution of the HVAD System in June 2021. The decision to remove the HVAD from commercial distribution now requires the use of the HeartMate 3 left ventricular assist system (Abbott, Inc) if a patient previously implanted with an HVAD requires a pump exchange. The goal of this document is to review important differences in the design of the HVAD and HeartMate 3 that are relevant to the medical management of patients supported with these devices, and to assess the technical aspects of an HVAD-to-HeartMate 3 exchange. This document provides the best available evidence that supports best practices.

CFD analysis of the HVAD's hemodynamic performance and blood damage with insight into gap clearance

Mechanical circulatory support using ventricular assist devices has become commonplace in the treatment of patients suffering from advanced stages of heart failure. While blood damage generated by these devices has been evaluated in depth, their hemodynamic performance has been investigated much less. This work presents the analysis of the complete operating map of a left ventricular assist device, in terms of pressure head, power and efficiency. Further investigation into its hemocompatibility is included as well. To achieve these objectives, computational fluid dynamics simulations of a centrifugal blood pump with a wide-blade impeller were performed. Several conditions were considered by varying the rotational speed and volumetric flow rate. Regarding the device's hemocompatibility, blood damage was evaluated by means of the hemolysis index. By relating the hemocompatibility of the device to its hemodynamic performance, the results have demonstrated that the highest hemolysis occurs at low flow rates, corresponding to operating conditions of low efficiency. Both performance and hemocompatibility are affected by the gap clearance. An innovative investigation into the influence of this design parameter has yielded decreased efficiencies and increased hemolysis as the gap clearance is reduced. As a further novelty, pump operating maps were non-dimensionalized to highlight the influence of Reynolds number, which allows their application to any working condition. The pump's operating range places it in the transitional regime between laminar and turbulent, leading to enhanced efficiency for the highest Reynolds number.

Development of Inspired Therapeutics Pediatric VAD: Benchtop Evaluation of Impeller Performance and Torques for MagLev Motor Design

PURPOSE

Despite the availability of first-generation extracorporeal mechanical circulatory support (MCS) systems that are widely used throughout the world, there is a need for the next generation of smaller, more portable devices (designed without cables and a minimal number of connectors) that can be used in all in-hospital and transport settings to support patients in heart failure. Moreover, a system that can be universally used for all indications for use including cardiopulmonary bypass (CPB), uni- or biventricular support (VAD), extracorporeal membrane oxygenation (ECMO) and respiratory assist that is suitable for use for adult, neonate, and pediatric patients is desirable. Providing a single, well designed, universal technology could reduce the incidence of human errors by limiting the need for training of hospital staff on a single system for a variety of indications throughout the hospital rather than having to train on multiple complex systems. The objective of this manuscript is to describe preliminary research to develop the first prototype pump for use as a ventricular assist device for pediatric patients with the Inspired Universal MCS technology. The Inspired VAD Universal System is an innovative extracorporeal blood pumping system utilizing novel MagLev technology in a single portable integrated motor/controller unit which can power a variety of different disposable pump modules intended for neonate, pediatric, and adult ventricular and respiratory assistance.

METHODS

A prototype of the Inspired Pediatric VAD was constructed to determine the hemodynamic requirements for pediatric applications. The magnitude/range of hydraulic torque of the internal impeller was quantified. The hydrodynamic performance of the prototype pump was benchmarked using a static mock flow loop model containing a heated blood analogue solution to test the pump over a range of rotational speeds (500-6000 RPM), flow rates (0-3.5 L/min), and pressures (0 to ~ 420 mmHg). The device was initially powered by a shaft-driven DC motor in lieu of a full MagLev design, which was also used to calculate the fluid torque acting on the impeller.

RESULTS

The pediatric VAD produced flows as high as 4.27 L/min against a pressure of 127 mmHg at 6000 RPM and the generated pressure and flow values fell within the desired design specifications.

CONCLUSIONS

The empirically determined performance and torque values establish the requirements for the magnetically levitated motor design to be used in the Inspired Universal MagLev System. This next step in our research and development is to fabricate a fully integrated and functional magnetically levitated pump, motor and controller system that meets the product requirement specifications and achieves a state of readiness for acute ovine animal studies to verify safety and performance of the system.

HVAD to HeartMate 3 left ventricular assist device exchange: Best practices recommendations

The HeartWare HVAD System (Medtronic) is a durable implantable left ventricular assist device that has been implanted in approximately 20,000 patients worldwide for bridge to transplant and destination therapy indications. In December 2020, Medtronic issued an Urgent Medical Device Communication informing clinicians of a critical device malfunction in which the HVAD may experience a delay or failure to restart after elective or accidental discontinuation of pump operation. Moreover, evolving retrospective comparative effectiveness studies of patients supported with the HVAD demonstrated a significantly higher risk of stroke and all-cause mortality when compared with a newer generation of a commercially available durable left ventricular assist device. Considering the totality of this new information on HVAD performance and the availability of an alternate commercially available device, Medtronic halted the sale and distribution of the HVAD System in June 2021. The decision to remove the HVAD from commercial distribution now requires the use of the HeartMate 3 left ventricular assist system (Abbott, Inc) if a patient previously implanted with an HVAD requires a pump exchange. The goal of this document is to review important differences in the design of the HVAD and HeartMate 3 that are relevant to the medical management of patients supported with these devices, and to assess the technical aspects of an HVAD-to-HeartMate 3 exchange. This document provides the best available evidence that supports best practices.

Evaluation of Centrifugal Blood Pump Performances for Biventricular Support in Virtual Simulation Model

BACKGROUND

Despite the advances in the left ventricular assist device (LVAD), there are still situations that require a biventricular assist device (BVAD) system. The purpose of this study was to explore and compare the system performance interactions with the HeartMate3 (HM3) and HeartWare (HVAD) in a BVAD configuration using the virtual mock loop (VML) simulation tool.

METHODS

The VML simulation tool is an in silico implementation of a lumped parameter model of the cardiovascular system with mechanical circulatory support. Patients with ejection fractions of 60%, 20%, and 15% were simulated in VML, and the HVAD and HM3 in a BVAD with ventricular cannulation were applied to simulated conditions. Pump speeds that restored baseline normal hemodynamics were determined. To determine the optimal speeds for BVAD, the left and right arterial pressures (LAP, RAP) were plotted.

RESULTS

In the HVAD, LAP and RAP balanced at 11 mm Hg with LVAD 3,500 rpm, right ventricular assist device (RVAD) 2,200 rpm; at 13 mm Hg with LVAD 3,000 rpm, RVAD 1,700 rpm; and at 14 mm Hg with LVAD 2,500 rpm, RVAD 1,300 rpm. For the HM3, at 8 mm Hg with LVAD 7,000 rpm, RVAD 5,000 rpm; at 9 mm Hg with LVAD 6,000 rpm, RVAD 4,300 rpm; and at 9.5 mm Hg with LVAD 5,000 rpm, RVAD 3,500 rpm.

CONCLUSION

The RVAD/LVAD speed ratios required for atrial balance were approximately 0.6 for the HVAD and 0.7 for the HM3. However, the HVAD required RVAD speeds below its range of operation.

Bridge to transplantation from mechanical circulatory support: a narrative review

Objective

To highlight recent developments in the utilization of mechanical circulatory support (MCS) devices as bridge-to-transplant strategies and to discuss trends in MCS use following the changes to the United Network for Organ Sharing (UNOS) heart allocation system.

Background

MCS devices have played an increasingly important role in the treatment of heart failure patients. Over the past several years, technological advancements have led to new developments in MCS devices and expanding indications for MCS use. In October of 2018, the UNOS heart allocation policy was revised to prioritize higher-urgency patients, including those supported with temporary MCS devices. Since then, changes in trends of MCS utilization have been observed.

Methods

Articles from the PubMed database regarding the use of MCS devices as bridge-to-transplant strategies were reviewed.

Conclusions

Over the past decade, utilization of temporary MCS devices, which include the intra-aortic balloon pump (IABP), percutaneous ventricular assist devices (pVADs), and extracorporeal membrane oxygenation (ECMO), has become increasingly common. Recent advancements in MCS include the development of pVADs that can fully unload the left ventricle (LV) as well as devices designed to provide right-sided support. Technological advancements in durable left ventricular assist devices (LVADs) have also led to improved outcomes both on the device and following heart transplantation. Following the 2018 UNOS heart allocation policy revision, the utilization of temporary MCS in advanced heart failure patients has further increased and the proportion of patients bridged directly from a temporary MCS device has exponentially risen. However, following the start of the COVID-19 pandemic, the trends have reversed, with a decrease in the percentage of patients bridged from a temporary MCS device. As long-term data following the allocation policy revision becomes available, future studies should investigate how trends in MCS use for patients with advanced heart failure continue to evolve.

Influence of circumferential annular grooving design of impeller on suspended fluid force of axial flow blood pump

Aiming at insufficient suspension force on the impeller when the hydraulic suspension axial flow blood pump is start at low speed, the impeller suspension stability is poor, and can't quickly enter the suspended working state. By establishing the mathematical model of the suspension force on the impeller, then the influence of the circumferential groove depth of the impeller on the suspension force is analyzed, and the annular groove depth on the impeller blade in the direction of fluid inlet and outlet was determined as (0.26, 0.02 mm). When the blood pump starts, there is an eccentricity between the impeller and the pump tube, the relationship between the suspension force and the speed of the impeller under different eccentricities is analyzed. Combined with the prototype experiment, the circumferential annular grooving design of the impeller can make the blood pump rotate at about 3500 rpm into the suspension state, when the impeller is at 8000 rpm, the impeller can basically achieve stable suspension at the eccentricity of 0.1 mm in the gravity direction, indicating that the reasonable circumferential annular grooving design of the impeller can effectively improve the suspension hydraulic force of the impeller and improve the stability of the hydraulic suspension axial flow blood pump.

Graft Resistance Difference after HVAD to HeartMate 3 Left Ventricular Assist Device Exchange

BACKGROUND

A likely consequence of discontinued distribution and sale of the Medtronic HVAD™ System (HVAD) will be an increase in replacement with the Abbott HeartMate 3™ Left Ventricular Assist Device (HeartMate 3) when device exchange is necessary. If part or all if the HVAD 10 mm-diameter outflow graft is retained during replacement, the HeartMate 3 will have to run at a higher speed than it would with its 14 mm-diameter graft.

METHODS

A steady-state, in vitro study was run with 250 mm-long samples of HVAD, HeartMate 3, and half-HVAD/half-HeartMate 3 grafts and, additionally, 125 and 375 mm-long samples of HVAD graft. Flows of 3.0, 3.9, 4.3, 4.7, and 6.0 L/min were applied to encompass expected clinical conditions.

RESULTS

At typical and high flow rates of 4.3 and 6.0 L/min, HeartMate 3 rotor speeds with the full HVAD graft had to be increased relative to those with the HeartMate 3 graft from 5350 to 5700 and 6350 to 6900 rpm, respectively, with power consumption increases from 3.7 to 4.3 (16%) and 5.5 to 6.8 W (24%), respectively.

CONCLUSIONS

The study did not elucidate a severe consequence of utilizing remnant HVAD graft during pump exchange, but the incremental risks of a higher rotor speed, disadvantage to the patient in battery runtime, and the general benefit of complete conversion to the HeartMate 3 graft should be balanced against other procedural considerations. Complete graft replacement during HVAD-to-HeartMate 3 conversion remains the preferred approach from an engineering point of view.

Physiology of Continuous-Flow Left Ventricular Assist Device Therapy

The expanding use of continuous-flow left ventricular assist devices (CF-LVADs) for end-stage heart failure warrants familiarity with the physiologic interaction of the device with the native circulation. Contemporary devices utilize predominantly centrifugal flow and, to a lesser extent, axial flow rotors that vary with respect to their intrinsic flow characteristics. Flow can be manipulated with adjustments to preload and afterload as in the native heart, and ascertainment of the predicted effects is provided by differential pressure-flow (H-Q) curves or loops. Valvular heart disease, especially aortic regurgitation, may significantly affect adequacy of mechanical support. In contrast, atrioventricular and ventriculoventricular timing is of less certain significance. Although beneficial effects of device therapy are typically seen due to enhanced distal perfusion, unloading of the left ventricle and atrium, and amelioration of secondary pulmonary hypertension, negative effects of CF-LVAD therapy on right ventricular filling and function, through right-sided loading and septal interaction, can make optimization challenging. Additionally, a lack of pulsatile energy provided by CF-LVAD therapy has physiologic consequences for end-organ function and may be responsible for a series of adverse effects. Rheological effects of intravascular pumps, especially shear stress exposure, result in platelet activation and hemolysis, which may result in both thrombotic and hemorrhagic consequences. Development of novel solutions for untoward device-circulatory interactions will facilitate hemodynamic support while mitigating adverse events. © 2021 American Physiological Society. Compr Physiol 12:1-37, 2021.

Lessons learned from catheter ablation of ventricular arrhythmias in patients with a fully magnetically levitated left ventricular assist device

INTRODUCTION

Data on catheter ablation of ventricular arrhythmias (VA) are scarce in patients with left ventricular assist devices (LVADs) and current evidence predominantly consists of case reports with outdated LVAD. This prospective observational study reports our experience in terms of catheter ablation of VAs in patients with novel 3^rd generation LVADs.

METHODS AND RESULTS

Between 2018 and 2020, nine consecutive patients undergoing a total number of ten ablation procedures for VAs were analyzed. The mean duration between LVAD implantation and catheter ablation was 23 ± 16 months. Acute procedural success was achieved in all patients. VA substrates were not related to the LVAD scarring (cannula) site in the majority of patients. All procedures were conducted without any relevant procedure-related complications. In terms of follow-up, only one patient presented with a repeat episode of electrical storm requiring ICD-shocks 16 months after the initial ablation procedure. Four patients suffered of singular VA effectively treated with antitachycardia pacing via their ICD. The remainder were free of any VA relapse (n = 4). Two non-procedure-related deaths occurred during follow-up.

CONCLUSIONS

Catheter ablation of VAs in patients with 3rd generation LVAD is feasible and leads to satisfying clinical results in terms of freedom from VA recurrence and quality of life. The majority of arrhythmia substrates in these patients are not directly related to the LVAD cannulation site and may represent a progress of heart failure.

Mechanical Cardiac Circulatory Support: an Overview of the Challenges for the Anesthetist

Purpose of Review

Owing to increased utilization of Mechanical Circulatory Support (MCS) devices, patients with these devices frequently present for surgeries requiring anesthetic support. The current article provides basics of perioperative management of these devices.

Recent Findings

Use of extracorporeal membrane oxygenation (ECMO) and left ventricular assist devices (LVADs) are on the rise with recently updated management guidelines. Veno-venous ECMO utilization has been widely utilized as a salvage therapy during the COVID-19 pandemic.

Summary

Intra-Aortic Balloon Pumps continue to be one of the most frequently used devices after acute myocardial infarction. ECMO is utilized for pulmonary or cardiopulmonary support as salvage therapy. LVADs are used in patients with end-stage heart failure as a destination therapy or bridge to transplant. Each of these devices present with their own set of management challenges. Anesthetic management of patients with MCS devices requires a thorough understanding of underlying operating and hemodynamic principles.

Effect of Timings of the Lavare Cycle on the Ventricular Washout in an In Vitro Flow Visualization Setup

Left ventricular assist devices inherently alter the intraventricular flow field and create areas of blood stasis with potential thrombus formation. The Lavare cycle of the Medtronic HeartWare HVAD was designed to improve ventricular washout. This study aims to evaluate its effects on ventricular washout in a pulsatile in vitro setting with a focus on the timing of pump speed changes. Ventricular flow fields were obtained via particle image velocimetry in two modes: With constant left ventricular assist devices speed and with the Lavare cycle applied. The start of the Lavare cycle was shifted over an entire cardiac cycle, and ventricular washout was evaluated based on velocity fields, kinetic energy, and normalized pulsatility of flow fields. The ventricular flow fields showed dependence on the timing of the Lavare cycle and interaction between speed changes and the cardiac phase. Higher apical velocity was observed for speed decreases at the late E wave and for increases at mid systole by 29% (P = 0.002) and 61% (P < 0.001), respectively. Mean apical kinetic energy for these phases also increased by 21% (P = 0.0013) and 46% (P < 0.001). The Lavare cycle generally promotes higher apical washout and can specifically generate further improved washout if speed steps are applied at the correct timing on the cardiac cycle.

The evolution of long-term pediatric ventricular assistance devices: a critical review

Introduction: The gap between the number of heart failure patients and the number of potential heart donors has never been larger than today, especially among the pediatric population. The use of mechanical circulatory support is seen as a potential alternative for clinicians to treat more patients. This treatment has proven its efficiency on short-term use. However, in order to replace heart transplant, the techniques should be used over longer periods of time.Areas covered: This review aims at furnishing an engineering vision of the evolution of ventricular assistance devices used in pediatrics. A critical analysis of the clinical complications related to devices generation is made to give an overview of the design improvements made since their inception.Expert opinion: The long-term use of a foreign device in the body is not without consequences, especially among fragile pediatric patients. Moreover, the size of their body parts increases the technical difficulties of such procedure. The balance between the living cells of the body is disturbed by the devices, mostly by the shear stress generated. To provide a safe mechanical circulatory support for long-term use, the devices should be more hemocompatible, preserving blood cells, adapted to the patient's systemic grid and miniaturized for pediatric use.

A Power Tracking Algorithm for Early Detection of Centrifugal Flow Pump Thrombosis

Logfiles from the HeartWare HVAD System provide operational pump trend data to aid in patient management. Pump thrombosis is commonly associated with increases in the logfile power that may precede the clinical presentation. A Power Tracking algorithm was developed to detect significant deviations in pump power that may be associated with pump thrombus (PT). The Power Tracking algorithm was applied retrospectively to logfiles captured in the ENDURANCE, ENDURANCE Supplemental, and LATERAL clinical trials. From a combined dataset of 896 patients, available logfiles with suspected PT (n = 70 events in 60 patients) and available logfiles from patients without adverse events (AEs) (n = 106 patients, consisting of 27.4 patient-years of monitoring) were organized into two cohorts. The Power Tracking algorithm detected PT cases on or before the recorded AE date with a sensitivity of 85.7%, with detection occurring an average of 3.9 days before clinical presentation. The algorithm averaged one false alarm for every 6.85 patient-years of monitoring from logfiles without AEs. The favorable performance of the Power Tracking algorithm may enable earlier detection of pump thrombosis and allow early medical management versus surgical intervention.

Extended finite element method for fluid-structure interaction in wave membrane blood pump

Numerical simulations of cardiac blood pump systems are integral to the optimization of device design, hydraulic performance and hemocompatibility. In wave membrane blood pumps, blood propulsion arises from the wave propagation along an oscillating immersed membrane, which generates small pockets of fluid that are pushed towards the outlet against an adverse pressure gradient. We studied the Fluid-Structure Interaction between the oscillating membrane and the blood flow via three-dimensional simulations using the Extended Finite Element Method (XFEM), an unfitted numerical technique that avoids remeshing by using a fluid fixed mesh. Our three-dimensional numerical simulations in a realistic pump geometry highlighted, for the first time in this field of application, that XFEM is a reliable strategy to handle complex industrial problems. Moreover, they showed the role of the membrane deformation in promoting a blood flow towards the outlet despite an adverse pressure gradient. We also simulated the pump system at different pressure conditions and we validated the numerical results against in-vitro experimental data.

Comparative assessment of different versions of axial and centrifugal LVADs: A review

Continuous-flow left ventricular assist devices (LVADs) have gained tremendous acceptance for the treatment of end-stage heart failure patients. Among different versions, axial flow and centrifugal flow LVADs have shown remarkable potential for clinical implants. It is also very crucial to know which device serves its purpose better to treat heart failure patients. A thorough comparison of axial and centrifugal LVADs, which may guide doctors in deciding before the implant, still lacks in the literature. In this work, an assessment of axial and centrifugal LVADs has been made to suggest a better device by comparing their engineering, clinical, and technological development of design aspects. Hydrodynamic and hemodynamic aspects for both types of pumps are discussed along with their biocompatibility, bearing types, and sizes. It has been observed numerically that centrifugal LVADs perform better over axial LVADs in every engineering aspect like higher hydraulic efficiency, better characteristics curve, lesser power intake, and also lesser blood damage. However, the clinical outcomes suggest that centrifugal LVADs experience higher events of infections, renal, and respiratory dysfunction. In contrast, axial LVADs encountered higher bleeding and cardiac arrhythmia. Moreover, recent technological developments suggested that magnetic type bearings along with biocompatible coating improve the life of LVADs.

"Compassionate" Cases of the Jarvik 2015 Ventricular Assist Device

The Jarvik 2015 Ventricular Assist Device (VAD) (Jarvik Inc, New York, NY) is the first and currently only continuous-flow VAD specifically designed for small children, and it is being evaluated in the so-called Pump for Kids, Infants, and Neonates (PumpKIN) trial. Due to the strict inclusion criteria of the trial, there have been a group of patients who failed to meet the criteria and therefore received the Jarvik 2015 VAD under the designation of "compassionate use." This is the same phenomenon seen previously during the Berlin Heart EXCOR trial. While we await the results of the PumpKIN trial, which will report the device performance in a strictly selected population, the compassionate use cases represent actual "real world" experiences. We describe herein our experience of two compassionate use cases. In particular, this report has a special emphasis on the power consumption and hemolysis and inflammatory lab profile of the Jarvik 2015 VAD as hemocompatibility was the primary focus of the developmental and the preclinical phases.

In Vitro Investigation of the Effect of Left Ventricular Assist Device Speed and Pulsatility Mode on Intraventricular Hemodynamics

Stroke has become the main cause of mortality and morbidity in patients treated with Left Ventricular Assist Devices (LVADs). The hemodynamics of the left ventricle are altered by the implantation of an LVAD, with the increase of thrombogenic flow patterns, such as stagnation regions. Time-resolved stereo particle image velocimetry (Stereo-PIV) measurements of the flow inside a patient-specific model of the left ventricle (LV) implanted with an LVAD were performed. The effects of LVAD speed, peripheral resistance and afterload were investigated. The impact of activating the LVAD pulsatility mode (periodic speed modulation) was also evaluated. Analysis of the velocity measurements in two orthogonal planes revealed stagnation zones which may be favorable to thrombus formation. Increasing LVAD speed, despite increasing the flow rate through the inflow cannula, does not automatically result in smaller stagnation regions. These results demonstrated the strong interdependence of peripheral resistance, afterload and flow through the LVAD. As a consequence, the pulsatility mode showed very limited effect on overall flow rate. However, it did reduce the size of high stagnation areas. This study showed how LVAD speed, peripheral resistance and afterload impact the complex intraventricular flow patterns in a ventricle implanted with an LVAD and quantify their thrombogenic risk.

Histologic features of thrombosis events with a centrifugal left ventricular assist device

BACKGROUND

Histology of thrombosis events in left ventricular assist devices (LVADs) may point to differences between the etiology of either ingested or de novo thrombus formation within LVADs. Materials ingested by the pump would have features suggestive of lifting and folding, whereas thrombi formed de novo would have uniform, parallel layers. This study tested this hypothesis in a cohort of explanted HeartWare Ventricular assist devices (HVADs) (Medtronic, Miami Lakes, Florida).

METHODS

Histology of thrombi from 59 explanted HVAD pumps were classified as presumed ingested, presumed de novo, or undeterminable on the basis of pre-defined criteria. The apparent size and location of the thrombotic materials were noted.

RESULTS

Histologically, all thrombotic materials were either presumed to be ingested (73%; 95 of 130 total histology cassettes examined) or of undeterminable origin (27%; 35 of 130 histology cassettes). Undetermined origin commonly was due to a lack of sufficient material for analysis. The larger materials (>800 mm³) tended to be in the inflow region. The most common finding was smaller thrombotic materials (<150 mm³) within the pump (64%; 38 of 59 HVADs); when these smaller materials were ingested by the pump, they were most often found within the smaller flow pathways within the pump.

CONCLUSIONS

Our study suggests that the thrombi within HVAD pumps are commonly ingested materials rather than de novo thrombus formation within the pump. Further research to understand the source of this ingested material and the consideration to mitigate this complication should be considered.

Endothelial Function in Patients With Continuous-Flow Left Ventricular Assist Devices

The endothelium plays a crucial role in maintaining cardiovascular homeostasis. Shear stress generated by flowing blood regulates the release of substances that provide adequate tissue perfusion. The extent of damage to endothelial cells depends on locally disturbed shear stress caused by the deteriorated flow. Patients with heart failure have reduced cardiac output, which results in reduced blood flow and negative shear stress. Reduced shear stress also affects microcirculation and reduces tissue perfusion. Consequently, the production of free oxygen radicals is increased and bioavailability of nitric oxide is additionally decreased. Therefore, endothelial dysfunction is involved in the progression of heart failure and cardiovascular events. Left ventricular assist devices (LVAD) are used for the treatment of patients with advanced heart failure. Older pulsatile flow LVADs were mostly substituted by continuous-flow LVADs (cf-LVADs). Despite the advantages of the cf-LVADs, the loss of pulsatility leads to different complications on the micro- and macrovascular levels. One of the pathogenetic mechanisms of cardiovascular complications with cf-LVADs may be endothelial dysfunction, which after the implantation of the device does not improve and may even deteriorate. In contrast, the pulsatile pattern of LVADs on blood flow could preserve endothelial function.

Evolution and clinical adoption of the Autologs system: An automated analysis for enhanced patient management in MCS

The Medtronic Autologs System allows real-time clinician review of HeartWare HVAD System logfiles, providing supplemental pump data to aid in patient management. In its first year of availability, Autologs generated a 70% increase in logfile submissions, with 73% of all logfile requests being sent to Autologs. Within a month of its launch, Autologs submissions outnumbered the amount of logfiles submitted for manual review. Following the v1.1 release, there was a 20% increase in logfile submissions, with 77% of all logfile requests being Autologs. With the introduction of v1.2, there was another 35% increase in logfile submissions, with nearly 90% of all logfile requests being Autologs. The widespread adoption and utility of the Autologs System highlights the need for clinician access to real-time data analysis in the field of Mechanical Circulatory Support.

Food and Drug Administration Malfunction Recalls of Left Ventricular Assist Devices

Left ventricular assist devices (LVADs) are being increasingly implanted given the increasing prevalence of patients with advanced heart failure stages. However, they are not exempt from device malfunctions. A PubMed search for the key words (left ventricular assist device malfunction) (ventricular assist system malfunction) was performed. We identified 28 publications in the US Food and Drug Administration (FDA) website database that addressed LVAD malfunction. Twenty-nine FDA recalls were identified regarding LVAD malfunctions: 17 regarding HeartWare ventricular assist device, six for HeartMate II, three for HeartMate 3, and three for total artificial heart. Mechanisms involved in LVAD malfunction include battery malfunction, loose driveline connector, malfunction of the system controller, loose power supply connector ports, malfunction of the driveline splice kit, problems with the percutaneous lead connection, disconnection of the bend relief and outflow graft and outflow graft occlusion among others. Multiple mechanisms could be linked to LVAD malfunction. However, multiple device modifications have been developed over the past decade to avoid recurrent malfunctions. Constant improvements and research in biotechnology are needed to prevent these complications. It remains to be seen if newer generation devices will lead to improved patient outcomes over the long term.

Use of a Virtual Mock Loop model to evaluate a new left ventricular assist device for transapical insertion

We are developing a novel type of miniaturized left ventricular assist device that is configured for transapical insertion. The aim of this study was to assess the performance and function of a new pump by using a Virtual Mock Loop system for device characterization and mapping. The results, such as pressure-flow performance curves, from pump testing in a physical mock circulatory loop were used to analyze its function as a left ventricular assist device. The Virtual Mock Loop system was programmed to mimic the normal heart condition, systolic heart failure, diastolic heart failure, and both systolic and diastolic heart failure, and to provide hemodynamic pressure values before and after the activation of several left ventricular assist device pump speeds (12,000, 14,000, and 16,000 r/min). With pump support, systemic flow and mean aortic pressure increased, and mean left atrial pressure and pulmonary artery pressure decreased for all heart conditions. Regarding high pump-speed support, the systemic flow, aortic pressure, left atrial pressure, and pulmonary artery pressure returned to the level of the normal heart condition. Based on the test results from the Virtual Mock Loop system, the new left ventricular assist device for transapical insertion may be able to ease the symptoms of patients with various types of heart failure. The Virtual Mock Loop system could be helpful to assess pump performance before in vitro bench testing.

Remote monitoring for better management of LVAD patients: the potential benefits of CardioMEMS

Left ventricular assist devices (LVAD) are frequently used in the treatment of end-stage heart failure (HF), and due to the shortage of heart donors and destination programs, it is likely to keep on growing. Still, LVAD therapy is not without complications and morbidity and rehospitalization rates are high. New ways to improve LVAD care both from the side of the patient and the physician are warranted. Remote monitoring could be a tool to tailor treatment in these patients, as no feedback exists at all about patient functioning on top of the static pump parameters. We aim to provide an overview and evaluation of the novel remote monitoring strategies to optimize LVAD management and elaborate on the opportunities of remote hemodynamic monitoring with CardioMEMS, at home in these patients as the next step to improve care.

Anesthesia at the Edge of Life: Mechanical Circulatory Support

Mechanical circulatory support devices are increasingly being used for patients presenting with heart failure. The primary goal of these devices is to maintain perfusion to all organs. Intra-aortic balloon pump and extracorporeal membrane oxygenators are temporary devices that are usually reserved for patients presenting with acute heart failure. A left ventricular assist device may be implanted either as a bridge to heart transplant or to cardiac recovery, or for destination therapy in refractory heart failure. Familiarization with these devices is key to patient management in the perioperative period, especially for patients presenting for noncardiac surgeries.

Finite Element Driven Design Domain Identification of a Beating Left Ventricular Simulator

Almost ten percent of the American population have heart diseases. Since the number of available heart donors is not promising, left ventricular assist devices are implemented as bridge therapies. Development of the assist devices benefits from both in-vivo animal and in-vitro mock circulation studies. Representation of the heart is a crucial part of the mock circulation setups. Recently, a beating left ventricular simulator with latex rubber and helically oriented McKibben actuators has been proposed. The simulator was able to mimic heart wall motion, however, flow rate was reported to be limited to 2 liters per minute. This study offers a finite element driven design domain identification to identify the combination of wall thickness, number of actuators, and the orientation angle that results in better deformation. A nonlinear finite element model of the simulator was developed and validated. Design domain was constructed with 150 finite element models, each with varying wall thickness and number of actuators with varying orientation angles. Results showed that the combination of 4 mm wall thickness and 8 actuators with 90 degrees orientation performed best in the design domain.

Numerical simulation of centrifugal and hemodynamically levitated LVAD for performance improvement

Left ventricular assist device (LVAD) provides an effective artificial support system to the heart patients. Despite the improved life survival rate, complications like hemolysis, blood trauma, and thrombus formation still limit the performance of the blood pump. The geometrical aspects of blood pumps majorly influence the hemodynamics, therefore these devices must be carefully engineered. In this work, several versions of centrifugal blood pumps are simulated using ANSYS-CFX to propose a best compatible design for LVAD. A hemodynamic levitation approach for the impeller is also suggested to overcome the cost and weight issue associated with the magnetic levitation. The blood flow is modeled by implementing Bird-Carreau model and its turbulence is solved using the SST turbulence model. The influence of the blade profile, blade tip width, blade numbers, and splitter blades on the hemodynamic characteristics through the pump is observed. An optimum design of centrifugal blood pump for the assistance of failed ventricle is proposed that can effectively pump the blood from the left ventricle to the ascending aorta. The proposal can be adopted by LVAD designers to have hemodynamically tuned efficient product.

Log files analysis and evaluation of circadian patterns for the early diagnosis of pump thrombosis with a centrifugal continuous-flow left ventricular assist device

BACKGROUND

No clinical standardized methods exist to identify the early stage of the development of pump thrombosis in the setting of HVAD (Medtronic Inc., USA) implantation. We aimed at developing a clinically relevant tool to evaluate HVAD operation during long-term support and at identifying a new reliable marker for the early diagnosis of pump thrombosis reflecting altered patient-pump physiological interplay.

METHODS

We developed a novel algorithm based on time-frequency analysis of the HVAD log files allowing the detection of the intrinsic circadian rhythmicity of the pump power consumption. With this tool, we retrospectively evaluated (1) post-operative restoration of circadian rhythm (n = 14 patients), (2) long-term stability of circadian rhythmicity in patients with no reported adverse events (n = 12), and (3) alteration of circadian fluctuations in patients who suffered from pump thrombosis (n = 19).

RESULTS

We demonstrate (1) progressive development of circadian rhythm following post-operative recovery (93% of the patients, 23 ± 15 days after implantation), (2) long-term stability of circadian rhythmicity in patients with no thrombotic complications (92% of the patients; 962 (445-1447) days of support), and (3) severe instability and loss of circadian fluctuations before the thrombotic event (89% of the patients, 12 ± 6 days ahead of the clinical manifestation of overt pump thrombosis). Furthermore, we provide the first clinical evidence of recovery of circadian rhythmicity following non-surgical resolution of pump thrombosis.

CONCLUSIONS

Time-frequency analysis of the HVAD log files provides a new tool for the early diagnosis of pump thrombosis. Loss of circadian rhythmicity might trigger medical evaluation, improving the results of medical management of pump thrombosis, and decreasing the need for pump exchange.