Orthognathic Surgery with Simultaneous Autologous Fat Transfer for Correction of Facial Asymmetry

Classification and characterization of facial asymmetry in adult patients with skeletal Class III malocclusion using cluster analysis

INTRODUCTION

This study aimed to analyze the comprehensive maxillofacial features of patients with skeletal Class III malocclusion and facial asymmetry to develop a classification system for diagnosis and surgical planning.

METHODS

A total of 161 adult patients were included, with 121 patients in the asymmetry group (menton deviation >2 mm) and 40 patients in the symmetry group (menton deviation ≤2 mm). Twenty-eight variables were determined, including transverse translation, roll and yaw of each facial unit, transverse width, mandibular morphology, and transverse dental compensation. Principal component (PC) analysis was conducted to extract PCs, and cluster analysis was performed using these components to classify the asymmetry group. A decision tree was constructed on the basis of the clustering results.

RESULTS

Six PCs were extracted, explaining 80.622% of the data variability. The asymmetry group was classified into 4 subgroups: (1) atypical type (15.7%) showed an opposite roll direction of maxillary dentition than of menton deviation; (2) compound type (34.71%) demonstrated significant ramus height differences, maxillary roll, and mandibular roll and yaw; (3) mandibular yaw type (44.63%) showed slight mandibular yaw without mandibular morphology asymmetry; and (4) maxillary-shift type (4.96%) shared similarities with the compound type but showed significant maxillary translation. The classification and regression tree model achieved a prediction accuracy of up to 85.11%.

CONCLUSIONS

This study identified 4 distinct phenotypes using cluster analysis and proposed tailored treatment recommendations on the basis of their specific characteristics. The classification results emphasized the importance of spatial displacement features, especially mandibular yaw, in diagnosing facial asymmetry. The established classification and regression tree model enables clinicians to identify patients conveniently.

The online attention analysis on orthognathic surgery research

OBJECTIVES

Altmetrics is one of the fields of bibliometrics that seeks to assess the impact and interest of a given subject through Internet users. The aim of this study is to make an altmetric analysis of the orthognathic surgery literature.

METHODS

A literature search was conducted using Dimensions app up to December 2023. A list of the 100 most mentioned articles on the topic was compiled. A Google Trends search was performed with same strategy to visualize important data regarding internet search. Charts and tables were created using Microsoft Excel and VOSviewer software to allow bibliometric visualization.

RESULTS

There was a very poor correlation between the number of mentions and the number of citations (r = 0.0202). Most articles discussed on technical innovations associated to orthognathic surgery, majority related to virtual planning (n = 26). Other topics considered interesting to internet readers were complications (n = 18), surgical technique (n = 14), and psychological aspects/quality of life (n = 13).

CONCLUSION

Online interest in orthognathic surgery closely aligns with the level of academic interest but is also influenced by factors such as location and economic status. The internet is a powerful tool for disseminating scientific research to a broad audience, making it more accessible and engaging than traditional academic channels.

Orthodontic Perspective for Face Asymmetry Correction

Facial symmetry affects the perception of facial beauty. Overall, facial harmony with an appropriate facial proportion and satisfactory midline facial symmetry are crucial factors for facial attractiveness. The role of orthodontists in correcting facial asymmetry begins with providing suitable diagnosis of the condition and identifying patients’ expectations. Through a thorough, subjective clinical evaluation of dentofacial asymmetry, the procedures for the surgical orthodontic management of facial asymmetry are discussed. The aim of this clinical review is to provide information on surgical indications for facial asymmetry, optimal treatment goals, presurgical orthodontic preparation, the surgery-first approach, three-dimensional (3D) surgical simulation, postsurgical orthodontic finishing, and treatment outcome evaluation. A comprehensive 3D diagnosis with appropriate planning, accurate transference of surgical simulation to real surgery, slight overcorrection, periodic assessment of treatment outcomes, and awareness of treatment limitations are essential to improve treatment outcomes of facial asymmetry.

Current trends in orthognathic surgery

Orthognathic surgery has steadily evolved, gradually expanding its scope of application beyond its original purpose of simply correcting malocclusion and the facial profile. For instance, it is now used to treat obstructive sleep apnea and to achieve purely cosmetic outcomes. Recent developments in three-dimensional digital technology are being utilized throughout the entire process of orthognathic surgery, from establishing a surgical plan to printing the surgical splint. These processes have made it possible to perform more sophisticated surgery. The goal of this review article is to introduce current trends in the field of orthognathic surgery and controversies that are under active discussion. The role of a plastic surgeon is not limited to performing orthognathic surgery itself, but also encompasses deep involvement throughout the entire process, including the set-up of surgical occlusion and overall surgical planning. The authors summarize various aspects in the field of orthognathic surgery with the hope of providing helpful information both for plastic surgeons and orthodontists who are interested in orthognathic surgery.

Refining Orthognathic Surgery Results by Synchronous Cheek Fat Compartment Augmentation with Fat Grafting in Adult Females with Class III Skeletal Profiles

SUMMARY

Patients with maxillomandibular disharmony may present with a flat to concave midface. The effects of orthognathic surgery concomitant with midface fat grafting on facial appearance and midface volumetric and positional change have not formally been assessed to date. The authors' approach for synchronous orthognathic surgery and fat grafting is described and evaluated. Adult female patients (n = 20) who underwent synchronous two-jaw orthognathic surgery and cheek-specific fat grafting (1.9 ± 0.6 cm3 per side) for correction of skeletal class III deformity and anteromedial cheek deficiency were prospectively included. Preoperative and postoperative photographs were appraised by 42 blinded raters using facial appearance scales for beauty, attractiveness, and pleasantness parameters. The three-dimensional midface soft-tissue volume change and postoperative cheek mass position were computed. Facial imaging data from gender-, ethnic-, and facial pattern-matched adult patients (n = 20) who underwent isolated two-jaw orthognathic surgery (n = 20) were included for comparison. The three-dimensional facial norms database-derived cheek mass position information (2.19 ± 1.31mm) was also adopted for analysis. Patients treated with the synchronous procedure had significantly (p < 0.001) increased facial appearance-related perception change for beauty (2.9 ± 1.6), attractiveness (2.8 ± 1.8), and pleasantness (3.0 ± 1.5) parameters, three-dimensional midface volume change (1.8 ± 0.5 cm3), and postoperative cheek mass position (2.16 ± 0.47 mm) in comparison with those treated with the isolated procedure (2.0 ± 1.5, 1.9 ± 1.6, 2.3 ± 1.6, 0.6 ± 0.2 cm3, and 1.84 ± 0.43 mm, respectively). Healthy female individuals had similar and larger cheek mass position than patients treated with synchronous (p > 0.05) and isolated (p < 0.001) procedures, respectively. Synchronous orthognathic surgery and check-specific fat grafting resulted in superior enhancement of facial appearance and midface volume and position compared with isolated orthognathic surgery.

CLINICAL QUESTION/LEVEL OF EVIDENCE

Therapeutic, III.

Facial Contour Refining after Surgery-First SSRO with Computer-Assisted Design in East Asians

BACKGROUND

Surgery-first sagittal split ramus osteotomies (SF-SSRO) are an effective treatment for patients with dental malocclusion. However, some patients with mandibular prognathism usually have facial deficiencies which cannot be corrected completely after orthognathic surgery. These are not accepted because the remaining facial contours are in disharmony.

METHODS

Twenty-five patients, who were unsatisfied with their appearances after SF-SSRO and orthodontics, were included. The preoperative CTs were used to investigate patients for facial deformity. To achieve a harmonious facial contour, mandible long-curve osteotomy/mandible U-shaped osteotomy, genioplasty or facial autologous fat grafting was selected depending on patients' contour deformities with the assistance of CAD.

RESULTS

Among the patients who underwent osteotomy, the gonial angle was improved from 111.16° ± 9 to 111.58° ± 9.06 after SF-SSRO because of distal fragment setback and rotation. After facial refine surgery, the gonial angle was significantly increased to 121.69°±2.41 (p < 0.05). And the mandibular width was decreased from 11.29 cm ± 0.44 to 10.45 cm ± 0.39 (p < 0.05) after mandibular outer plate griding. All patients were shown no signs of infection, massive bleeding, and osteonecrosis in the early stage. After follow-up time, they were all satisfied with their results and most of them recovered from lip numbness.

CONCLUSIONS

This study indicated the clinical feasibility of two-stage orthognathic and facial bone contouring surgery for the treatment of dentofacial deformities. Two-stage facial contouring surgery can provide esthetic improvement for more accuracy in refining the facial contour.

LEVEL OF EVIDENCE IV

This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Outcome of full digital workflow for orthognathic surgery planning in the treatment of asymmetric skeletal class III deformity

BACKGROUND/PURPOSE

Studies have reported the advantages of digital imaging-assisted orthognathic surgery planning, but there is scarce information about a full digital planning modality. This study evaluated the 3D cephalometric-based and patient-reported outcomes of a full digital workflow for orthognathic surgery planning in the treatment of asymmetric maxillomandibular disharmony.

METHODS

A postoperative 3D image dataset of 30 Taiwanese Chinese patients with asymmetric skeletal Class III deformities who underwent full digital planning for two-jaw surgery were retrieved from the authors' database. The 3D cephalometric data (dental, skeletal, and soft tissue evaluations) were compared to the ethnicity-matched 3D cephalometric normative values. Patient-reported outcome measure tools regarding postoperative overall appearance and satisfaction with facial areas (ranging from 0 to 100 and 0 to 10, respectively) were administered. The number of needed or requested revisionary surgery was collected.

RESULTS

No difference (all p > 0.05) was observed between the orthognathic-surgery-treated patients and the normative value for most of the tested 3D cephalometric parameters, with the exception (p < 0.05) of three mandible and occlusal-plane-related parameters. Both patient-reported outcome measure tools showed that patients' satisfaction with their postoperative appearance was high for overall face (89.7 ± 4.5) and specific facial regions (nose, 7.1 ± 1.3; lip, 8.3 ± 1.6; upper gum, 8.5 ± 1.2; cheek, 8.8 ± 1.1; chin, 9.2 ± 1.2; and teeth, 9.3 ± 0.8), with no need for revisionary surgery.

CONCLUSION

The patients treated with a full 3D digital planning-assisted two-jaw surgery had a similar 3D dental relation, facial convexity, and symmetry compared to healthy ethnicity-matched individuals, and they reported higher satisfaction levels with their postoperative facial appearance results.

Efficacy of Autologous Fat Grafting in Restoring Facial Symmetry in Linear Morphea-Associated Lesions

Morphea is a rare sclerotic autoimmune disorder primary affecting the skin and subcutaneous tissues. The linear head variants involve the facial area, with asymmetries and deformities. Eighteen patients with hemifacial deformity (age range 14–75 years) were assessed before surgery (T0), and after one (T1, 18 patients) or two (T2, six patients) surgical treatments of facial autologous fat grafting. A stereophotogrammetric reconstruction of the facial surface was obtained for each patient and a group of control subjects, and facial symmetry was quantified according to the root mean square distance between homologous areas of trigeminal innervation. Values obtained from the control subjects were used to calculate z-scores for patients. At T0, all facial thirds of the patients resulted significantly more asymmetrical than those of the control subjects (Mann–Whitney test, p < 0.05), while at T1, the symmetry of the middle facial third did not differ from that of control subjects (p = 0.263). At T2, the upper and the lower facial thirds also did not differ from the control values (p > 0.05). The faster result obtained in the facial middle third was in accord with clinical findings. In conclusion, autologous fat grafting significantly improved facial asymmetry after one (middle facial third) or two (lower and upper thirds) treatments; the outcomes were efficaciously quantified by stereophotogrammetry.

Isolated Fat Grafting for Reconstruction of Lower Face Volumetric Asymmetry in Skeletally Immature Patients: A Clinical Outcome Study

BACKGROUND

The purpose of this study was to assess the objective and subjective outcomes of lower face volumetric (contour) asymmetry correction with isolated fat grafting in skeletally immature patients.

METHODS

A prospective analysis was conducted of skeletally immature patients (n = 73) with craniofacial microsomia and Parry-Romberg syndrome who underwent isolated fat grafting (with no previous or concomitant bone surgery) using anatomical surgical principles (facial subunits and fat compartments) for the reconstruction of lower face volumetric asymmetry. Objective ultrasound and photogrammetric lower face symmetry analyses were blindly performed preoperatively and at 3 and 12 months postoperatively. A panel assessment of blinded surgical professionals and laypersons was also obtained to grade the subjective lower face symmetry.

RESULTS

There were significant (all P < 0.05) postoperative objective and subjective lower face symmetry enhancements (preoperative < postoperative) after isolated fat grafting, with no differences (all P > 0.05) between 3 versus 12 months' postoperative comparisons.

CONCLUSIONS

Growing patients with unilateral lower face volumetric asymmetries presented with improvement of objective and subjective symmetry after a single isolated fat grafting procedure.

[In vitro study on promoting migration ability of rat adipose derived stem cells modified by stromal cell-derived factor 1α]

Objective

To explored the effect of stromal cell-derived factor 1α (SDF-1α) on promoting the migration ability of rat adipose derived stem cells (rADSCs) by constructed the rADSCs overexpression SDF-1α via adenovirus transfection.

Methods

rADSCs were isolated from adipose tissue of 6-week-old SPF Sprague Dawley rats. Morphological observation, multi-directional differentiations (osteogenic, adipogenic, and chondrogenic inductions), and flow cytometry identification were performed. Transwell cell migration experiment was used to observe and screen the optimal concentration of exogenous SDF-1α to optimize the migration ability of rADSCs; the optimal multiplicity of infection (MOI) of rADSCs was screened by observing the cell status and fluorescence expression after transfection. Then the third generation of rADSCs were divided into 4 groups: group A was pure rADSCs; group B was rADSCs co-cultured with SDF-1α at the best concentration; group C was rADSCs infected with recombinant adenovirus-mediated green fluorescent protein (Adv-GFP) with the best MOI; group D was rADSCs infected with Adv-GFP-SDF-1α overexpression adenovirus with the best MOI. Cell counting kit 8 (CCK-8) and Transwell cell migration experiment were preformed to detect and compare the effect of exogenous SDF-1α and SDF-1α overexpression on the proliferation and migration ability of rADSCs.

Results

The cell morphology, multi-directional differentiations, and flow cytometry identification showed that the cultured cells were rADSCs. After screening, the optimal stimulating concentration of exogenous SDF-1α was 12.5 nmol/L; the optimal MOI of Adv-GFP adenovirus was 200; the optimal MOI of Adv-GFP-SDF-1α overexpression adenovirus was 400. CCK-8 method and Transwell cell migration experiment showed that compared with groups A and C, groups B and D could significantly improve the proliferation and migration of rADSCs ( P<0.05); the effect of group D on enhancing the migration of rADSCs was weaker than that of group B, but the effect of promoting the proliferation of rADSCs was stronger than that of group D ( P<0.05).

Conclusion

SDF-1α overexpression modification on rADSCs can significantly promote the proliferation and migration ability, which may be a potential method to optimize the application of ADSCs in tissue regeneration and wound repair.

Autologous Fat Grafting in Young Patients: A Simple and Effective Way to Achieve Facial Balance

GOALS/PURPOSE

Rhinoplasty is the most common procedure seen in the teenage population. Many of these patients have facial imbalance both recognized and unrecognized by the individual and family. Most often it involves chin or midface deficiency. When the discussion involves the possibility of additional surgery, such as an alloplastic chin implant or a surgical osteotomy, the conversation halts because the patient and family seek a simpler solution.Autologous fat transfer is a useful adjunct to achieve facial balance in chin and cheek in the teen population. More recently, we have been using this technique to correct facial disharmony in rhinoplasty patients.

METHODS/TECHNIQUE

Fat grafting was performed at the time of rhinoplasty in 22 patients (age, 15-19 years). Presurgical planning involved cephalometric and computer-enhanced photographic analysis of the face. Midface retrusion and underprojected mentum were treated. Deficient sites were treated with small aliquots of fat, which were injected into the supraperiosteal plane. The average amounts of fat grafting injected per region were 2 to 3 mL for the malar region and 8 to 10 mL for the chin and geniomandibular borders.

RESULTS/COMPLICATIONS

Twenty-two patients underwent augmentation of soft tissue and skeletal deficiencies. Analysis of postoperative results showed excellent outcomes with enhancement of facial profile and proportions. The mean follow-up was 3 years. The majority of patients reported high degree of satisfaction. No complications were observed.

CONCLUSIONS

The combination of rhinoplasty and autologous fat grafting offers very satisfactory esthetic outcomes and improvement of facial balance with minimal added time, cost, and risk.

Fat Grafting in Managing Craniofacial Deformities

BACKGROUND

The successful correction of craniofacial contour deformities remains a major challenge in plastic surgery. This article reviews important concepts and strategies for craniofacial fat grafting and presents a SOBRAPAR Hospital algorithm focused on achieving craniofacial contour symmetry as early as possible without compromising function.

METHODS

Principle-based methods (i.e., anatomical facial fat compartments, fluid accommodation model, multistage site-specific craniofacial fat grafting, and structural fat-grafting technique) were itemized into an algorithm to aid in planning and selecting the best surgical approach (i.e., bone and/or soft tissue procedures) in order to obtain craniofacial contour symmetry.

RESULTS

The treatment plan and choice of surgical technique implemented to address bone and/or or soft tissue deformities were determined by specific diagnosis, patient age at presentation, and functional status. Bony reconstruction in skeletally immature patients is reserved solely for those patients with functional issues.

CONCLUSION

By adopting principle-based methods and fat compartment theory, we are able to achieve craniofacial contour symmetry and aesthetically pleasing outcomes without compromising function.

Volumetric Analysis of Fat Injection by Computerized Tomography in Orthognathic Surgery: Preliminary Report on a Novel Volumetric Analysis Process for the Quantification of Aesthetic Results

BACKGROUND

Integrated approaches to orthognathic surgery should include accurate volumetric evaluation of the skull and soft tissues. In patients with dentofacial deformities, the most frequent aesthetic deficits are attributable to an underdevelopment of hard and soft tissues. Traditional osteotomic procedures often fail to guarantee a stability of soft tissues over time. For this reason, in selecting a surgical strategy, the surgeon should consider not only traditional osteotomies, but also soft-tissue improving procedures, such as lipofilling. Preoperative surgical planning systems, such as the Virtual surgical planning (VSP) protocol, are based mainly on skeletal movement prediction. Quantitative estimation of soft-tissue modifications is not part of common clinical practice. Most commonly, the evaluation of soft-tissue modifications after orthognathic procedures is instead performed by clinical qualitative means.The purpose of this study was to describe a novel computed tomography (CT)-based volumetric analysis process for the quantification of injected autologous adipose tissue in patients who have undergone simultaneous orthognathic and lipofilling procedures.

METHODS

This was a retrospective review of consecutive patients who underwent combined orthognathic surgery and lipofilling from June 2016 to May 2017 for malocclusion with functional and aesthetic impairments. Preoperative planning included clinical evaluation and virtual osteotomy planning according to the VSP protocol. The volume of fat to be injected was estimated clinically by comparing virtual renderings with preoperative clinical photographs. The surgical technique involved Le Fort I and sagittal split mandibular osteotomies, combined with autologous fat injection in the malar and perioral regions. Postoperative evaluation was performed with a novel imaging process based on CT image segmentation to quantify the exact volume of injected fat. Skeletal stability was also evaluated at 3 months.

RESULTS

Sixteen patients were enrolled in the study, all females, with a mean age of 24.5 years (range, 18-36 years). The mean difference between the fat tissue injected and that quantified postoperatively was 6.01 cm. All patients had clinically satisfactory facial convexity, with complete restoration of the cheekbone contour, at 3 months.

CONCLUSION

This study introduces a novel CT-image based technique to quantitatively assess the contribution of injected fat to the postoperative soft-tissue volume increase after combined orthognathic surgery with autologous lipofilling. In the future, this CT-based volumetric analysis technique could be the gold standard for evaluating facial lipofilling outcomes, and for assessing clinical aesthetic outcomes based on the injected volume of fat.

Mandibular Augmentation With a New Sandwich Osteotomy: A Morphologic Study

OBJECTIVE

Facial asymmetry is one of common complaints in plastic and craniofacial surgery in Orient. Hemimandibular dysplasia has considered to be the key role in facial asymmetry. Despite of the undergrow of mandibular length and height, the lackness of mandibular thickness contributes to the asymmetry. The aim of this study was to describe the therapeutic efficiency of mandibular augmentation with a new sandwich osteotomy with interpositional natural coral and coralline hydroxyapatite (CHA).

METHODS

Nine goats were randomly divided into 3 groups and observed at 6, 12, and 18 months after surgery. All goats received splitting of bilateral mandibular outer cortex and interpositional grafting with natural coral and CHA, respectively (sandwich osteotomy). Data were evaluated and statistically analyzed by t-test.

RESULTS

All goats were observed at 3 different time points. The computed tomography images show that the area of operation was healed and the thickness of the mandible was increased in 3 time points. In the 3 groups, mandibular thickness and volume were significantly different compared with those before operation (P < 0.05). The volume of CHA group improved better than coral group (P < 0.05).

CONCLUSION

This study provides a promising alternative method for mandibular augmentation with a sandwich osteotomy and interpositional grafting with natural coral and CHA. The thickness and volume of mandible had been effectively increased in follow-ups.

Autologous Free Fat Grafting for Management of the Facial Contour Asymmetry

BACKGROUND

The purposes of this study were to report autologous free fat grafting as the workhorse procedure to augment the facial soft-tissue envelope and restore facial contour symmetry of patients with asymmetric facial malformations; to detail the SOBRAPAR Hospital algorithm for soft-tissue reconstruction of patients with facial contour asymmetry; and to assess facial symmetry after fat grafting.

METHODS

A retrospective analysis of consecutive patients (n = 178) who underwent fat grafting to restore the facial contour symmetry according to the SOBRAPAR Hospital algorithm between 2009 and 2016 was conducted. Computerized photogrammetric quantitative and qualitative facial symmetry analyses were performed.

RESULTS

There were significant (all P < 0.05) postoperative quantitative facial symmetry enhancement and an overall qualitative facial symmetry enhancement, with a mean fat graft procedures per patient of 1.6 ± 0.7, ranging of 1 to 3.

CONCLUSION

A significant improvement of facial contour symmetry was obtained in a subset of patients using fat grafting according to the SOBRAPAR Hospital algorithm.

Orthognathic surgery "again" to correct aesthetic failure of primary surgery: Report on outcomes and patient satisfaction in 70 consecutive cases

PURPOSE

An increasing number of patients complain about unsatisfactory aesthetic outcomes of orthognathic surgery, desiring reoperation to improve facial aesthetics. The aims of this article are to present a wide range of aesthetic reasons to justify a secondary orthognathic surgery and to report aesthetic outcomes and patient satisfaction after reoperation.

MATERIAL AND METHODS

This research covers 70 consecutive patients who underwent a secondary bimaxillary orthognathic surgery with simultaneous facial lipofilling procedures between January 2006 and December 2015. The screening criteria are described for patient selection, the diagnostic process, surgical procedures, and outcomes. Pre- and postoperative facial appearances are compared. Postoperatively, patients were asked to state the improvements perceived in their facial appearance and their satisfaction with the aesthetic outcomes.

RESULTS

After reoperation, all patients showed a full Class I occlusion. Major complications did not occur. According to the clinicians' evaluation, a postoperative evident aesthetic improvement was achieved in 65 patients (92.9%), and 64 patients (91.4%) were satisfied with the aesthetic outcomes achieved.

CONCLUSION

Secondary orthognathic surgery performed in conjunction with facial lipofilling procedures in most cases led to satisfactory aesthetic outcomes. A very accurate selection of patients, a meticulous three-dimensional diagnostic process and planning, and appropriate intra-operative maneuvers are required.