First Multimodal Embolization Particles Visible on X-ray/Computed Tomography and Magnetic Resonance Imaging:

Bioimaging Probes Based on Magneto-Fluorescent Nanoparticles

Novel nanomaterials are of interest in biology, medicine, and imaging applications. Multimodal fluorescent-magnetic nanoparticles demand special attention because they have the potential to be employed as diagnostic and medication-delivery tools, which, in turn, might make it easier to diagnose and treat cancer, as well as a wide variety of other disorders. The most recent advancements in the development of magneto-fluorescent nanocomposites and their applications in the biomedical field are the primary focus of this review. We describe the most current developments in synthetic methodologies and methods for the fabrication of magneto-fluorescent nanocomposites. The primary applications of multimodal magneto-fluorescent nanoparticles in biomedicine, including biological imaging, cancer treatment, and drug administration, are covered in this article, and an overview of the future possibilities for these technologies is provided.

Tailor made magnetic nanolights: fabrication to cancer theranostics applications

Nanoparticles having magnetic and fluorescent properties could be considered as a gift to materials scientists due to their unique magneto-optical qualities. Multiple component particles can overcome challenges related with a single component and unveil bifunctional/multifunctional features that can enlarge their applications in diagnostic imaging agents and therapeutic delivery vehicles. Bifunctional nanoparticles that have both luminescent and magnetic features are termed as magnetic nanolights. Herein, we present recent progress of magneto-fluorescent nanoparticles (quantum dots based magnetic nanoparticles, Janus particles, and heterocrystalline fluorescent magnetic materials), comprehensively describing fabrication strategies, types, and biomedical applications. In this review, our aim is not only to encompass the preparation strategies of these special types of magneto-fluorescent nanomaterials but also their extensive applications in bioimaging techniques, cancer therapy (targeted and hyperthermic), and sustained release of active agents (drugs, proteins, antibodies, hormones, enzymes, growth factors).

Temperature sensitive hydrogel for preoperative treatment of renal carcinoma

Surgical resection has been suggested as an effective and first-line treatment of renal cell carcinoma (RCC). However, operation is quite difficult for the patients with stage of middle-late or hypervascularized tumors. Transarterial chemoembolization (TACE) plays an important role in decreasing the size of tumors before surgery. In this work, we prepared an injectable drug-delivery system of doxorubicin-loaded temperature sensitive hydrogel for transarterial chemoembolization in RCC. The sol-gel transition behavior and rheologic analysis showed that the doxorubicin-loaded temperature sensitive hydrogel had good temperature sensitivity. Then, The X-ray experiment of hydrogel showed excellent visibility under the digital subtraction angiography and computed tomography scans in vitro and in vivo. Moreover, the studies of embolization in beagle's right kidney showed good properties in embolizing of renal arteries. In TACE therapy studies of rabbit VX₂ renal tumors, angiography, computed tomography and histopathological analysis verified that TACE therapy of doxorubicin-loaded temperature sensitive hydrogel had excellent embolic efficiency as a result of repressing the tumor growth. This hydrogel could provide valuable option in the treatment of renal cell carcinoma before surgery.

Advances in Biomaterials and Technologies for Vascular Embolization

Minimally invasive transcatheter embolization is a common nonsurgical procedure in interventional radiology used for the deliberate occlusion of blood vessels for the treatment of diseased or injured vasculature. A wide variety of embolic agents including metallic coils, calibrated microspheres, and liquids are available for clinical practice. Additionally, advances in biomaterials, such as shape-memory foams, biodegradable polymers, and in situ gelling solutions have led to the development of novel preclinical embolic agents. The aim here is to provide a comprehensive overview of current and emerging technologies in endovascular embolization with respect to devices, materials, mechanisms, and design guidelines. Limitations and challenges in embolic materials are also discussed to promote advancement in the field.

Evaluation of a novel liquid embolic agent (precipitating hydrophobic injectable liquid (PHIL)) in an animal endovascular embolization model

BACKGROUND

The choice of the embolic agent and the embolization technique can have a significant impact on the success of endovascular embolization.

OBJECTIVE

To evaluate a novel iodinated copolymer-based liquid embolic agent (precipitating hydrophobic injectable liquid (PHIL)) in the porcine rete mirabile (RM), serving as an endovascular embolization model. Onyx, as an established liquid embolic agent, served as comparator.

MATERIALS AND METHODS

Sixteen embolization procedures were performed using PHIL (n=8) or Onyx (n=8) as liquid embolic agent. Waiting time between injections was set to 30 or 60 s (n=4 per study group). Survival time after intervention was 2 hours or 7 days. Embolization characteristics (eg, procedure times, number of injections and volume of embolic agent) and embolization extent (percentage of embolized RM in post-interventional x-ray) were assessed. Post-interventional CT and histopathological analyses were performed.

RESULTS

Embolization characteristics and embolization extent were not significantly different for PHIL and Onyx, including subgroups (eg, embolization extent 44% vs 69% (medians); p=0.101). For PHIL, extension of the waiting time from 30 to 60 s led to a significantly higher embolization extent (24% vs 72% (medians); p=0.035). Moderate disintegration and mild inflammation of the embolized blood vessels were present for both embolic agents.

CONCLUSION

PHIL is feasible for transarterial embolization in an acute and subacute endovascular embolization model. In this preliminary experimental in vivo study, embolization characteristics, embolization extent, and biocompatibility seem to be similar to those of Onyx.

X-ray visible and doxorubicin-loaded beads based on inherently radiopaque poly(lactic acid)-polyurethane for chemoembolization therapy

The aim of current study was to develop drug-loaded polymeric beads with intrinsic X-ray visibility as embolic agents, targeting for noninvasive intraoperative location and postoperative examination during chemoembolization therapy. To endow polymer with inherent radiopacity, 4,4'-isopropylidinedi-(2,6-diiodophenol) (IBPA) was firstly synthesized and employed as a contrast agent, and then a set of radiopaque iodinated poly(lactic acid)-polyurethanes (I-PLAUs) via chain extender method were synthesized and characterized. These I-PLAU copolymers possessed sufficient radiopacity, in vitro non-cytotoxicity with human adipose-derived stem cells, and in vivo biocompatibility and degradability in rabbit model via intramuscular implantation. Doxorubicin (DOX), as a chemotherapeutic agent, was further incorporated into I-PLAU beads via a double emulsification (W/O/W) method. For drug release, two ratios of DOX-loaded I-PLAU beads exhibited calibrated size (200-550μm), porous internal structure, good X-ray visibility, evenly drug loading as well as tunable drug release. A preliminary test on in vitro tumor cell toxicity demonstrated that the DOX-loaded I-PLAU beads performed efficient anti-tumor effect. This study highlights novel X-ray visible drug-loaded I-PLAU beads used as promising embolic agents for non-invasive in situ X-ray tracking and efficient chemotherapy, which could bring opportunities to the next generation of multifunctional embolic agents.

1,3-Bis(2-chloroethyl)-1-nitrosourea-loaded bovine serum albumin nanoparticles with dual magnetic resonance-fluorescence imaging for tracking of chemotherapeutic agents

To date, knowing how to identify the location of chemotherapeutic agents in the human body after injection is still a challenge. Therefore, it is urgent to develop a drug delivery system with molecular imaging tracking ability to accurately understand the distribution, location, and concentration of a drug in living organisms. In this study, we developed bovine serum albumin (BSA)-based nanoparticles (NPs) with dual magnetic resonance (MR) and fluorescence imaging modalities (fluorescein isothiocyanate [FITC]-BSA-Gd/1,3-bis(2-chloroethyl)-1-nitrosourea [BCNU] NPs) to deliver BCNU for inhibition of brain tumor cells (MBR 261-2). These BSA-based NPs are water dispersible, stable, and biocompatible as confirmed by XTT cell viability assay. In vitro phantoms and in vivo MR and fluorescence imaging experiments show that the developed FITC-BSA-Gd/BCNU NPs enable dual MR and fluorescence imaging for monitoring cellular uptake and distribution in tumors. The T1 relaxivity (R1) of FITC-BSA-Gd/BCNU NPs was 3.25 mM(-1) s(-1), which was similar to that of the commercial T1 contrast agent (R1 =3.36 mM(-1) s(-1)). The results indicate that this multifunctional drug delivery system has potential bioimaging tracking of chemotherapeutic agents ability in vitro and in vivo for cancer therapy.

A Novel Inherently Radiopaque Bead for Transarterial Embolization to Treat Liver Cancer - A Pre-clinical Study

Purpose: Embolotherapy using microshperes is currently performed with soluble contrast to aid in visualization. However, administered payload visibility dimishes soon after delivery due to soluble contrast washout, leaving the radiolucent bead's location unknown. The objective of our study was to characterize inherently radiopaque beads (RO Beads) in terms of physicomechanical properties, deliverability and imaging visibility in a rabbit VX2 liver tumor model.

Materials and Methods: RO Beads, which are based on LC Bead® platform, were compared to LC Bead. Bead size (light microscopy), equilibrium water content (EWC), density, X-ray attenuation and iodine distribution (micro-CT), suspension (settling times), deliverability and in vitro penetration were investigated. Fifteen rabbits were embolized with either LC Bead or RO Beads + soluble contrast (iodixanol-320), or RO Beads+dextrose. Appearance was evaluated with fluoroscopy, X-ray single shot, cone-beam CT (CBCT).

Results: Both bead types had a similar size distribution. RO Beads had lower EWC (60-72%) and higher density (1.21-1.36 g/cc) with a homogeneous iodine distribution within the bead's interior. RO Beads suspension time was shorter than LC Bead, with durable suspension (>5 min) in 100% iodixanol. RO Beads ≤300 µm were deliverable through a 2.3-Fr microcatheter. Both bead types showed similar penetration. Soluble contrast could identify target and non-target embolization on fluoroscopy during administration. However, the imaging appearance vanished quickly for LC Bead as contrast washed-out. RO Beads+contrast significantly increased visibility on X-ray single shot compared to LC Bead+contrast in target and non-target arteries (P=0.0043). Similarly, RO beads demonstrated better visibility on CBCT in target arteries (P=0.0238) with a trend in non-target arteries (P=0.0519). RO Beads+dextrose were not sufficiently visible to monitor embolization using fluoroscopy.

Conclusion: RO Beads provide better conspicuity to determine target and non-target embolization compared to LC Bead which may improve intra-procedural monitoring and post-procedural evaluation of transarterial embolization.

Preparation of Radiopaque Drug-Eluting Beads for Transcatheter Chemoembolization

PURPOSE

To develop a simple method to produce radiopaque drug-eluting microspheres (drug-eluting beads [DEBs]) that could be incorporated into the current clinical transcatheter arterial chemoembolization workflow and evaluate their performance in vitro and in vivo.

MATERIALS AND METHODS

An ethiodized oil (Lipiodol; Guerbet, Villepinte, France) and ethanol solution was added to a lyophilized 100-300 µm bead before loading with doxorubicin. These radiopaque drug-eluting beads (DEBs; Biocompatibles UK Ltd, Farnham, United Kingdom) were evaluated in vitro for x-ray attenuation, composition, size, drug loading and elution, and correlation between attenuation and doxorubicin concentration. In vivo conspicuity was evaluated in a VX2 tumor model.

RESULTS

Lipiodol was loaded into lyophilized beads using two glass syringes and a three-way stopcock. Maximum bead attenuation was achieved within 30 minutes. X-ray attenuation of radiopaque beads increased linearly (21-867 HU) with the amount of beads (0.4-12.5 vol%; R(2) = 0.9989). Doxorubicin loading efficiency and total amount eluted were similar to DC Bead (Biocompatibles UK Ltd); however, the elution rate was slower for radiopaque DEBs (P < .05). Doxorubicin concentration linearly correlated with x-ray attenuation of radiopaque DEBs (R(2) = 0. 99). Radiopaque DEBs were seen in tumor feeding arteries after administration by fluoroscopy, computed tomography, and micro-computed tomography, and their location was confirmed by histology.

CONCLUSIONS

A simple, rapid method to produce radiopaque DEBs was developed. These radiopaque DEBs provided sufficient conspicuity to be visualized with x-ray imaging techniques.

PEGylated NaHoF4 nanoparticles as contrast agents for both X-ray computed tomography and ultra-high field magnetic resonance imaging

It is well-known that multimodal imaging can integrate the advantages of different imaging modalities by overcoming their individual limitations. As ultra-high field magnetic resonance imaging (MRI) will be inevitably used in future MRI/X-ray computed tomography (CT) scanner, it is highly expected to develop high-performance nano-contrast agents for ultra-high field MR and CT dual-modality imaging, which has not been reported yet. Moreover, specific behavior of nano-contrast agents for ultra-high field MRI is a challenging work and still remains unknown. Herein, a novel type of NaHoF4 nanoparticles (NPs) with varied particle sizes were synthesized and explored as high-performance dual-modality contrast agents for ultra-high field MR and CT imaging. The specific X-ray absorption and MR relaxivity enhancements with varied nanoparticle diameters (3 nm, 7 nm, 13 nm and 29 nm) under different magnetic field (1.5/3.0/7.0 T) are investigated. Based on experimental results and theoretical analysis, the Curie and dipolar relaxation mechanisms of NaHoF4 NPs are firstly separated. Our results will greatly promote the future medical translational development of the NaHoF4 nano-contrast agents for ultra-high field MR/CT dual-modality imaging applications.

Synthesis and characterization of image-able polyvinyl alcohol microspheres for image-guided chemoembolization

Therapeutic embolization of blood vessels is a minimally invasive, catheter-based procedure performed with solid or liquid emboli to treat bleeding, vascular malformations, and vascular tumors. Hepatocellular carcinoma (HCC) affects about half a million people per year. When unresectable, HCC is treated with embolization and local drug therapy by transarterial chemoembolization (TACE). For TACE, drug eluting beads (DC Bead(®)) may be used to occlude or reduce arterial blood supply and deliver chemotherapeutics locally to the tumor. Although this treatment has been shown to be safe and to improve patient survival, the procedure lacks imaging feedback regarding the location of embolic agent and drug coverage. To address this shortcoming, herein we report the synthesis and characterization of image-able drug eluting beads (iBeads) from the commercial DC Bead(®) product. Two different radiopaque beads were synthesized. In one approach, embolic beads were conjugated with 2,3,5-triiodobenzyl alcohol in the presence of 1,1'-carbonyldiimidazol to give iBead I. iBead II was synthesized with a similar approach but instead using a trimethylenediamine spacer and 2,3,5-triiodobenzoic acid. Doxorubicin was loaded into the iBeads II using a previously reported method. Size and shape of iBeads were evaluated using an upright microscope and their conspicuity assessed using a clinical CT and micro-CT. Bland and Dox-loaded iBeads II visualized with both clinical CT and microCT. Under microCT, individual bland and Dox loaded beads had a mean attenuation of 7904 ± 804 and 11,873.96 ± 706.12 HU, respectively. These iBeads have the potential to enhance image-guided TACE procedures by providing localization of embolic-particle and drug.

Nanoparticles for imaging: top or flop?

Nanoparticles are frequently suggested as diagnostic agents. However, except for iron oxide nanoparticles, diagnostic nanoparticles have been barely incorporated into clinical use so far. This is predominantly due to difficulties in achieving acceptable pharmacokinetic properties and reproducible particle uniformity as well as to concerns about toxicity, biodegradation, and elimination. Reasonable indications for the clinical utilization of nanoparticles should consider their biologic behavior. For example, many nanoparticles are taken up by macrophages and accumulate in macrophage-rich tissues. Thus, they can be used to provide contrast in liver, spleen, lymph nodes, and inflammatory lesions (eg, atherosclerotic plaques). Furthermore, cells can be efficiently labeled with nanoparticles, enabling the localization of implanted (stem) cells and tissue-engineered grafts as well as in vivo migration studies of cells. The potential of using nanoparticles for molecular imaging is compromised because their pharmacokinetic properties are difficult to control. Ideal targets for nanoparticles are localized on the endothelial luminal surface, whereas targeted nanoparticle delivery to extravascular structures is often limited and difficult to separate from an underlying enhanced permeability and retention (EPR) effect. The majority of clinically used nanoparticle-based drug delivery systems are based on the EPR effect, and, for their more personalized use, imaging markers can be incorporated to monitor biodistribution, target site accumulation, drug release, and treatment efficacy. In conclusion, although nanoparticles are not always the right choice for molecular imaging (because smaller or larger molecules might provide more specific information), there are other diagnostic and theranostic applications for which nanoparticles hold substantial clinical potential.

Superparamagnetic iron oxide nanoparticles function as a long-term, multi-modal imaging label for non-invasive tracking of implanted progenitor cells

The purpose of this study was to determine the ability of superparamagnetic iron oxide (SPIO) nanoparticles to function as a long-term tracking label for multi-modal imaging of implanted engineered tissues containing muscle-derived progenitor cells using magnetic resonance imaging (MRI) and X-ray micro-computed tomography (μCT). SPIO-labeled primary myoblasts were embedded in fibrin sealant and imaged to obtain intensity data by MRI or radio-opacity information by μCT. Each imaging modality displayed a detection gradient that matched increasing SPIO concentrations. Labeled cells were then incorporated in fibrin sealant, injected into the atrioventricular groove of rat hearts, and imaged in vivo and ex vivo for up to 1 year. Transplanted cells were identified in intact animals and isolated hearts using both imaging modalities. MRI was better able to detect minuscule amounts of SPIO nanoparticles, while μCT more precisely identified the location of heavily-labeled cells. Histological analyses confirmed that iron oxide particles were confined to viable, skeletal muscle-derived cells in the implant at the expected location based on MRI and μCT. These analyses showed no evidence of phagocytosis of labeled cells by macrophages or release of nanoparticles from transplanted cells. In conclusion, we established that SPIO nanoparticles function as a sensitive and specific long-term label for MRI and μCT, respectively. Our findings will enable investigators interested in regenerative therapies to non-invasively and serially acquire complementary, high-resolution images of transplanted cells for one year using a single label.

Improved drug targeting to liver tumors after intra-arterial delivery using superparamagnetic iron oxide and iodized oil: preclinical study in a rabbit model

PURPOSE

The purpose of this study was to evaluate the feasibility and the therapeutic efficacy of a novel drug-delivery system that uses superparamagnetic iron oxide (SPIO) and iodized oil (IO) to improve the selective intra-arterial (IA) drug delivery to an experimentally induced hepatic tumor.

MATERIALS AND METHODS

This animal study was approved by our institutional animal care and use committee. Fifteen rabbits with hepatic VX2 carcinomas were treated with IA delivery of 4 different agents: doxorubicin alone (group A, n = 3), doxorubicin/IO (group B, n = 3), a doxorubicin/SPIO complex (group C, n = 4), and a doxorubicin/SPIO/IO complex (group D, n = 5). The infused doxorubicin dose was 1 mg for all groups. The serum doxorubicin concentration was measured at 0, 5, 30, 60, and 120 minutes after the delivery. To assess the distribution of the SPIO, magnetic resonance (MR) scans were performed at day 7 after the delivery, when computed tomographic scans were performed in addition to MR in group B and D to assess the distribution of IO. After the completion of follow-up imaging, all the animals were euthanized to measure the intratumoral doxorubicin concentration and to assess tumor viability through pathologic examination.

RESULTS

Groups C and D demonstrated significantly lower MR signal intensities, which inversely corresponded to SPIO deposition, in the tumor areas than did groups A and B. Group D exhibited the lowest serum doxorubicin concentration at all time points up to 180 minutes after the delivery, suggesting minimal passage of doxorubicin into the systemic circulation. The intratumoral doxorubicin concentrations were 72.4 ng/g for group A, 142.0 ng/g for group B, 264.1 ng/g for group C, and 679.6 ng/g for group D. The proportion of viable tumor cells were 65.3% for group A, 1.3% for group B, 17.0% for group C, and 0.1% for group D.

CONCLUSIONS

The drug-delivery system developed using SPIO and IO can result in better drug targeting when it is used for IA delivery to liver cancer. The results of this study warrant further investigation of this potential clinical treatment of advanced liver cancer.

MR imaging of therapeutic magnetic microcarriers guided by magnetic resonance navigation for targeted liver chemoembolization

PURPOSE

Magnetic resonance navigation (MRN), achieved with an upgraded MRI scanner, aims to guide new therapeutic magnetic microcarriers (TMMC) from their release in the hepatic vascular network to liver tumor. In this technical note, in vitro and in vivo MRI properties of TMMC, loaded with iron-cobalt nanoparticles and doxorubicin, are reported by following three objectives: (1) to evaluate the lengthening of echo-time (TE) on nano/microparticle imaging; (2) to characterize by MRI TMMC distribution in the liver; and (3) to confirm the feasibility of monitoring particle distribution in real time.

METHODS

Phantom studies were conducted to analyze nano/microparticle signals on T 2*-weighted gradient-echo (GRE) MR images according to sample weight and TE. Twelve animal experiments were used to determine in vivo MRI parameters. TMMC tracking was evaluated by magnetic resonance imaging (MRI) in four rabbits, which underwent MRN in the hepatic artery, three without steering, two in real-time, and three as blank controls. TMMC distribution in the right and left liver lobes, determined by ex vivo MR image analysis, was compared to the one obtained by cobalt level analysis.

RESULTS

TMMC induced a hypointense signal that overran the physical size of the sample on MR images. This signal, due to the nanoparticles embedded into the microparticles, increased significantly with echo-time and sample amount (p < 0.05). In vivo, without steering, contrast-to-noise ratio (CNR) values for the right and left lobes were similar. With MRN, the CNR in the targeted lobe was different from that in the untargeted lobe (p = 0.003). Ex vivo, TMMC distribution, based on MRI signal loss volume measurement, was correlated with that quantified by Co level analysis (r = 0.92). TMMC accumulation was tracked in real time with an 8-s GRE sequence.

CONCLUSIONS

MRI signal loss induced by TMMC can serve to track particle accumulation and to assess MRN efficiency.

Multifunctional superparamagnetic iron oxide nanoparticles: design, synthesis and biomedical photonic applications

Superparamagnetic iron oxide nanoparticles (SPIONs) have shown great promise in biomedical applications. In this review, we summarize the recent advances in the design and fabrication of core-shell and hetero-structured SPIONs and further outline some exciting developments and progresses of these multifunctional SPIONs for diagnosis, multimodality imaging, therapy, and biophotonics.

Use of Lipiodol as a drug-delivery system for transcatheter arterial chemoembolization of hepatocellular carcinoma: a review

Hepatocellular carcinoma (HCC) remains a major public health problem. Transarterial chemoembolization (TACE) is recognized as the standard of care for patients with unresectable, asymptomatic, noninvasive and multinodular HCC. This procedure is based on percutaneous administration of a cytotoxic drug emulsified with Lipiodol followed by embolization of the tumour-feeding arteries. The standard procedure involves Lipiodol, an oily contrast medium which consists of a mixture of long-chain di-iodinated ethyl esters of poppy seed fatty acids. The aim of this review is to discuss the physical properties, tumour uptake behaviour and drug delivery effects of Lipiodol, the parameters influencing tumour uptake and future prospects. Lipiodol has a unique place in TACE as it combines three specific characteristics: drug delivery, transient and plastic embolization and radiopacity properties. Substantial heterogeneity in the physicochemical characteristics of Lipiodol/cytotoxic agent emulsions might reduce the efficacy of this procedure and justifies the current interest in Lipiodol for drug delivery.

Nano-sized CT contrast agents

Computed tomography (CT) is one of the most widely used clinical imaging modalities. In order to increase the sensitivity of CT, small iodinated compounds are used as injectable contrast agents. However, the iodinated contrast agents are excreted through the kidney and have short circulation times. This rapid renal clearance not only restricts in vivo applications that require long circulation times but also sometimes induces serious adverse effects related to the excretion pathway. In addition, the X-ray attenuation of iodine is not efficient for clinical CT that uses high-energy X-ray. Due to these limitations, nano-sized iodinated CT contrast agents have been developed that can increase the circulation time and decrease the adverse effects. In addition to iodine, nanoparticles based on heavy atoms such as gold, lanthanides, and tantalum are used as more efficient CT contrast agents. In this review, we summarize the recent progresses made in nano-sized CT contrast agents.

A historical overview of magnetic resonance imaging, focusing on technological innovations

Magnetic resonance imaging (MRI) has now been used clinically for more than 30 years. Today, MRI serves as the primary diagnostic modality for many clinical problems. In this article, historical developments in the field of MRI will be discussed with a focus on technological innovations. Topics include the initial discoveries in nuclear magnetic resonance that allowed for the advent of MRI as well as the development of whole-body, high field strength, and open MRI systems. Dedicated imaging coils, basic pulse sequences, contrast-enhanced, and functional imaging techniques will also be discussed in a historical context. This article describes important technological innovations in the field of MRI, together with their clinical applicability today, providing critical insights into future developments.

SPPS resins impact the PNA-syntheses' improvement

The personalized medicine, also documented as "individualized medicine", is an effective and therapeutic approach. It is designed to treat the disease of the individual patient whose precise differential gene expression profile is well known. The trend in the biomedical and biophysical research shows important consequences for the pharmaceutical drug and diagnostics research. It requires a high variability in the design and safety of target-specific pharmacologically active molecules and diagnostic components for imaging of metabolic processes. A key technology which may fulfill the highest demands during synthesis of these individual drugs and diagnostics is the solid phase synthesis which is congenial to automated manufacturing. Additionally the choice of tools like resins and reagents is pivotal to synthesize drugs and diagnostics in high quality and yields. Here we demonstrate the solid phase synthesis effects dependent on the choice of resin and of the deprotection agent.

Mixture designs to assess composition–structure–property relationships in SiO2–CaO–ZnO–La2O3–TiO2–MgO–SrO–Na2O glasses: Potential materials for embolization

Embolization with micron-sized particulates is widely applied to treat uterine fibroids. The objective of this work was to develop mixture designs to predict materials composition–structure–property relationships for the SiO2–CaO–ZnO–La2O3–TiO2–MgO–SrO–Na2O glass system and compare its fundamental materials properties (density and cytocompatibility), against a state-of-the-art embolic agent (contour polyvinyl alcohol) to assess the potential of these materials for embolization therapies. The glass structures were evaluated using 29Si MAS NMR to identify chemical shift and line width; the particulate densities were determined using helium pycnometry and the cell viabilities were assessed via MTT assay. 29Si MAS NMR results indicated peak maxima for each glass in the range of −82.3 ppm to −89.9 ppm; associated with Q2 to Q3 units in silicate glasses. All experimental embolic compositions showed enhanced in vitro compatibility in comparison to Contour PVA with the exceptions of ORP9 and ORP11 (containing no TiO2). In this study, optimal compositions for cell viability were obtained for the following compositional ranges: 0.095–0.188 mole fraction ZnO; 0.068–0.159 mole fraction La2O3; 0.545–0.562 mole fraction SiO2 and 0.042–0.050 mole fraction TiO2. To ensure ease of producibility in obtaining good melts, a maximum loading of 0.068 mole fraction La2O3 is required. This is confirmed by the desirability approach, for which the only experimental composition (ORP5) of the materials evaluated was presented as an optimum composition; combining high cell viability with ease of production (0.188 mole fraction ZnO; 0.068 mole fraction La2O3; 0.562 mole fraction SiO2 and 0.042 mole fraction TiO2).

Multimodal visibility of a modified polyzene-F-coated spherical embolic agent for liver embolization: feasibility study in a porcine model

PURPOSE

To evaluate multimodal visibility of modified currently available microspheres on radiography, magnetic resonance (MR) imaging, and computed tomography (CT) in a porcine liver model.

MATERIALS AND METHODS

Livers of four pigs were embolized with two sizes (100 μm ± 25 and 700 μm ± 50) of modified Embozene Microspheres embedded with different densities of barium sulfate and iodine as radiopaque materials (intensity groups A-C, with increasing intensity from A to C for 100 μm and intensities A and C for 700 μm) and iron oxide as magnetic substance for MR imaging visibility. Pigs embolized with currently available Embozene Microspheres served as control groups. Pre- and postinterventional MR imaging (T1- and T2-weighted) and CT were performed. Qualitative and quantitative (ie, determination of signal-to-noise ratio [SNR]) particle visibility was evaluated on radiography, MR imaging, and CT.

RESULTS

Modified particles of both sizes were visible on radiography, MR imaging, and CT. Particles in the control group were not visible. For modified particles of both sizes, SNRs measured on MR imaging decreased significantly after embolization (eg, cluster analysis of group A, 100 μm ± 50 particles, T1-weighted, -74.6% ± 3.4; P = .03). For modified particles of both sizes, SNR measured on CT increased significantly after embolization (eg, cluster analysis of group A, 700 μm ± 25 particles, +54.3% ± 13.5; P = .03).

CONCLUSIONS

Modification of currently available Embozene Microspheres was successful, with multimodal visibility on radiography, MR imaging, and CT in porcine liver. In the future, this might improve procedure accuracy and allow monitoring, control, and improvement of embolotherapy during and after the procedure.

Locoregional drug delivery using image-guided intra-arterial drug eluting bead therapy

Lipiodol-based transarterial chemoembolization (TACE) has been performed for over 3 decades for the treatment of solid tumors and describes the infusion of chemotherapeutic agents followed by embolization with particles. TACE is an effective treatment for inoperable hepatic tumors, especially hypervascular tumors such as hepatocellular carcinoma. Recently, drug eluting beads (DEBs), in which a uniform embolic material is loaded with a drug and delivered in a single image-guided step, have been developed to reduce the variability in a TACE procedure. DEB-TACE results in localization of drug to targeted tumors while minimizing systemic exposure to chemotherapeutics. Once localized in the tissue, drug is eluted from the DEB in a controlled manner and penetrates hundreds of microns of tissue from the DEB surface. Necrosis is evident surrounding a DEB in tissue days to months after therapy; however, the contribution of drug and ischemia is currently unknown. Future advances in DEB technology may include image-ability, DEB size tailored to tumor anatomy and drug combinations.

Radiopaque drug-eluting beads for transcatheter embolotherapy: experimental study of drug penetration and coverage in swine

PURPOSE

To determine local doxorubicin levels surrounding radiopaque drug-eluting beads (DEBs) in normal swine liver and kidney following transcatheter arterial chemoembolization. The influence of bead size (70-150 μm or 100-300 μm) was compared with regard to tissue penetration and spatial distribution of the bead, as well as eventual drug coverage (ie, amount of tissue exposed to drug).

MATERIALS AND METHODS

Radiopaque DEBs were synthesized by suspension polymerization followed by incorporation of iodized oil and doxorubicin. Chemoembolization of swine liver and kidney was performed under fluoroscopic guidance. Three-dimensional tissue penetration of "imageable" DEBs was investigated ex vivo with micro-computed tomography (microCT). Drug penetration from the bead surface and drug coverage was evaluated with epifluorescence microscopy, and cellular localization of doxorubicin was evaluated with confocal microscopy. Necrosis was evaluated with hematoxylin and eosin staining.

RESULTS

MicroCT demonstrated that 70-150-μm DEBs were present in more distal arteries and located in a more frequent and homogeneous spatial distribution. Tissue penetration of doxorubicin from the bead appeared similar (∼300 μm) for both DEBs, with a maximum tissue drug concentration at 1 hour coinciding with nuclear localization of doxorubicin. The greater spatial frequency of the 70-150-μm DEBs resulted in approximately twofold improved drug coverage in kidney. Cellular death is predominantly observed around the DEBs beginning at 8 hours, but increased at 24 and 168 hours.

CONCLUSIONS

Smaller DEBs penetrated further into targeted tissue (ie, macroscopic) with a higher spatial density, resulting in greater and more uniform drug coverage (ie, microscopic) in swine.

Value of MR contrast media in image-guided body interventions

In the past few years, there have been multiple advances in magnetic resonance (MR) instrumentation, in vivo devices, real-time imaging sequences and interventional procedures with new therapies. More recently, interventionists have started to use minimally invasive image-guided procedures and local therapies, which reduce the pain from conventional surgery and increase drug effectiveness, respectively. Local therapy also reduces the systemic dose and eliminates the toxic side effects of some drugs to other organs. The success of MR-guided procedures depends on visualization of the targets in 3D and precise deployment of ablation catheters, local therapies and devices. MR contrast media provide a wealth of tissue contrast and allows 3D and 4D image acquisitions. After the development of fast imaging sequences, the clinical applications of MR contrast media have been substantially expanded to include pre- during- and post-interventions. Prior to intervention, MR contrast media have the potential to localize and delineate pathologic tissues of vital organs, such as the brain, heart, breast, kidney, prostate, liver and uterus. They also offer other options such as labeling therapeutic agents or cells. During intervention, these agents have the capability to map blood vessels and enhance the contrast between the endovascular guidewire/catheters/devices, blood and tissues as well as direct therapies to the target. Furthermore, labeling therapeutic agents or cells aids in visualizing their delivery sites and tracking their tissue distribution. After intervention, MR contrast media have been used for assessing the efficacy of ablation and therapies. It should be noted that most image-guided procedures are under preclinical research and development. It can be concluded that MR contrast media have great value in preclinical and some clinical interventional procedures. Future applications of MR contrast media in image-guided procedures depend on their safety, tolerability, tissue specificity and effectiveness in demonstrating success of the interventions and therapies.

Iron oxide nanoparticle-containing microbubble composites as contrast agents for MR and ultrasound dual-modality imaging

Magnetic resonance (MR) and ultrasound (US) imaging are widely used diagnostic modalities for various experimental and clinical applications. In this study, iron oxide nanoparticle-embedded polymeric microbubbles were designed as multi-modal contrast agents for hybrid MR-US imaging. These magnetic nano-in-micro imaging probes were prepared via a one-pot emulsion polymerization to form poly(butyl cyanoacrylate) microbubbles, along with the oil-in-water (O/W) encapsulation of iron oxide nanoparticles in the bubble shell. The nano-in-micro embedding strategy was validated using NMR and electron microscopy. These hybrid imaging agents exhibited strong contrast in US and an increased transversal relaxation rate in MR. Moreover, a significant increase in longitudinal and transversal relaxivities was observed after US-induced bubble destruction, which demonstrated triggerable MR imaging properties. Proof-of-principle in vivo experiments confirmed that these nanoparticle-embedded microbubble composites are suitable contrast agents for both MR and US imaging. In summary, these magnetic nano-in-micro hybrid materials are highly interesting systems for bimodal MR-US imaging, and their enhanced relaxivities upon US-induced destruction recommend them as potential vehicles for MR-guided US-mediated drug and gene delivery.