Mandibular reconstruction with different techniques

Anatomical research of the clavicular pedicled flap for mandibular reconstruction: vascularization and harvesting technique

PURPOSE

Mandibular reconstruction remains a challenging procedure despite the availability of various flaps and grafts. The ultimate objective is to restore oral functioning and attain acceptable morphological outcomes while considering donor site morbidity. This study describes the vascular supply and harvesting technique of a pedicled clavicular bone. The proximity of the clavicle is conducive to a mandibular replacement and allows the use of vascularized bone with a single surgical field.

METHODS

The osteoperiosteal clavicular pedicled flap was harvested on the right side of ten fresh cadaver specimens. The cervical transverse artery was injected with colored latex in some cases and methylene blue in others.

RESULTS

The vascular periosteal supply of the clavicular flap was highlighted. The clavicular bone was linked to its pedicle which was composed of vascular and adipose-fascial tissues, without any overlying skin paddle. Its vasculature was supplied by a reverse flow from the ascending cervical artery. The pedicled clavicular bone readily reached the mandible in all dissections.

CONCLUSION

The osteoperiosteal vasculature of the clavicular flap is based on the transverse cervical artery which receives a reverse blood supply from the ascending cervical artery. This vascular pattern is reliable because of the existence of the sub-occipital microvascular network named the "Bosniak node." This pedicled clavicular flap seems to be a robust perspective in both mandibular and facial bone reconstruction. We do not claim that it will replace the existing approaches, but it will expand the surgical panel of mandibular reconstruction. Its clinical realisation will judge its functionality.

Rehabilitation of mandibular resected patients using fixed immediately loaded corticobasal implant -supported prostheses. A case series

INTRODUCTION AND IMPORTANCE

Aliments such as congenital conditions, pathological, and iatrogenic circumstances may result in mandibular defects that can severely disturb the patients' oral health, functions (mastication, speech), aesthetics, and quality of life and present a rehabilitating challenge.

CASE PRESENTATION

we present a multidisciplinary treatment approach for three cases presented with mandibular resection as a consequence of cystic, benign, and malignant tumour eradication that were rehabilitated with immediately loaded fixed corticobasal implant-supported prostheses and a follow-up period of 5,5 and 4 years. The reported cases present with excellent implant survival, along with healthy peri-implant tissues, stable prostheses, enhanced speech, chewing ability, aesthetics, superior patient satisfaction, and improved overall self-esteem.

CLINICAL DISCUSSION

A multidisciplinary oral and maxillofacial team is mandatory for the successful rehabilitation of patients with mandibular resection and to restore soft and hard tissue loss. The reported treatment modality offers the patient immediate fixed implant-supported prostheses omitting the need for a bone grafting procedure, with optimum peri-implant tissue health, excellent biomechanical and prosthetic results, and significant improvement in function and satisfaction.

CONCLUSION

Corticobasal fixed implant-supported prostheses can be a reliable treatment modality for mandibular resection, resulting in notable enhancements in the patients' oral health, appearance, mastication, speech, and self-esteem.

Delayed reconstruction of the combat-related mandibular defects with non-vascularized iliac crest grafts: Defining the optimal conditions for a positive outcome in the retrospective study

BACKGROUND

Reconstruction of mandibular defects caused by combat injuries is challenging for clinicians due to soft tissue defects and high complication risk. This study evaluated the outcomes of mandibular continuous defects reconstruction with non-vascularized iliac crest graft (NVICG) in patients with combat injuries.

MATERIAL AND METHODS

Patients with continuous mandibular defects acquired by high-velocity agents, who received NVICG reconstruction with or without microvascular-free soft tissue or regional flaps, were included in the study. The outcome variable was graft loss due to postoperative complications or full (more than 90 %) resorption. The primary predictor variable was soft tissue defect in the recipient area. The secondary predictor variable was the length of the defect. Variables related to patients, defect site, surgery, and other complications were also evaluated. Statistical analysis was performed with the usage of independent sample t-test, Pearson's chi-squared and Fisher's exact tests with a significance level of P < 0.05 RESULTS: The study included 24 patients with 27 mandibular defects. Overall, the general success rate of reconstructions was 59.3 %. Soft tissue defects were significantly associated with graft failure and other complications (p < 0.05), which were mostly related to soft tissue defects. The graft success rate was only 14.3 % even in minor soft tissue defects. In turn, in reconstructions with sufficient soft tissue coverage, the graft survived in 75.0 % of the cases. In addition, patients with more delayed reconstruction had significantly fewer graft failures than those with earlier surgery (p < 0.05). No associations were found between defect size and complications.

CONCLUSION

The sufficient soft tissue coverage is essential in the reconstruction of mandibular defects caused by combat injuries. Also, minor soft tissue defects should be covered with soft tissue flaps to avoid complications and graft loss in these specific injuries. Even large defects can be reconstructed with NIVICG if the soft tissue coverage is sufficient.

Elective Tracheotomy in Patients Receiving Mandibular Reconstructions: Reduced Postoperative Ventilation Time and Lower Incidence of Hospital-Acquired Pneumonia

Elective tracheotomy (ET) secures the airway and prevents adverse airway-related events as unplanned secondary tracheotomy (UT), prolonged ventilation (PPV) or nosocomial infection. The primary objective of this study was to identify factors predisposing for airway complications after reconstructive lower ja surgery. We reviewed records of patients undergoing mandibulectomy and microvascular bone reconstruction (N = 123). Epidemiological factors, modus of tracheotomy regarding ET and UT, postoperative ventilation time and occurrence of hospital-acquired pneumonia HAP were recorded. Predictors for PPV and HAP, ET and UT were identified. A total of 82 (66.7%) patients underwent tracheotomy of which 12 (14.6%) were performed as UT. A total of 52 (42.3%) patients presented PPV, while 19 (15.4%) developed HAP. Increased operation time (OR 1.004, p = 0.005) and a difficult airway (OR 2.869, p = 0.02) were predictors, while ET reduced incidence of PPV (OR 0.054, p = 0.006). A difficult airway (OR 4.711, p = 0.03) and postoperative delirium (OR 6.761, p = 0.01) increased UT performance. HAP increased with anesthesia induction time (OR 1.268, p = 0.001) and length in ICU (OR 1.039, p = 0.009) while decreasing in ET group (HR 0.32, p = 0.02). OR for ET increased with mounting CCI (OR 1.462, p = 0.002) and preoperative radiotherapy (OR 2.8, p = 0.018). ET should be strongly considered in patients with increased CCI, preoperative radiotherapy and prolonged operation time. ET shortened postoperative ventilation time and reduced HAP.

An innovative additively manufactured implant for mandibular injuries: Design and preparation processes based on simulation model

Objective: For mandibular injury, how to utilize 3D implants with novel structures to promote the reconstruction of large mandibular bone defect is the major focus of clinical and basic research. This study proposed a novel 3D titanium lattice-like implant for mandibular injuries based on simulation model, which is designed and optimized by a biomechanical/mechanobiological approach, and the working framework for optimal design and preparation processes of the implant has been validated to tailored to specific patient biomechanical, physiological and clinical requirements. Methods: This objective has been achieved by matching and assembling different morphologies of a lattice-like implant mimicking cancellous and cortical bone morphologies and properties, namely, an internal spongy trabecular-like structure that can be filled with bone graft materials and an external grid-like structure that can ensure the mechanical bearing capacity. Finite element analysis has been applied to evaluate the stress/strain distribution of the implant and bone graft materials under physiological loading conditions to determine whether and where the implant needs to be optimized. A topological optimization approach was employed to improve biomechanical and mechanobiological properties by adjusting the overall/local structural design of the implant. Results: The computational results demonstrated that, on average, values of the maximum von-Mises stress in the implant model nodes could be decreased by 43.14% and that the percentage of optimal physiological strains in the bone graft materials can be increased from 35.79 to 93.36% since early regeneration stages. Metal additive manufacturing technology was adopted to prepare the 3D lattice-like implant to verify its feasibility for fabrication. Following the working framework proposed in this study, the well-designed customized implants have both excellent biomechanical and mechanobiological properties, avoiding mechanical failure and providing sufficient biomechanical stimuli to promote new bone regeneration. Conclusion: This study is expected to provide a scientific and feasible clinical strategy for repairing large injuries of mandibular bone defects by offering new insights into design criteria for regenerative implants.

Vertical mandibular bone augmentation by the osteodistraction of the transplanted fibula free flap: A case series with long-term follow-up

Vertical augmentation of the mandible to prepare dental implant therapy is still a challenge, especially with large mandible defects. Reconstruction with fibula free flap is a regularly applied approach in such cases, but it does not always yield optimal results: the resulting crestal height might differ significantly from the crestal height of the patient's intact bone, which makes esthetic and functional rehabilitation difficult. Osteodistraction of the integrated flap is a known but rarely discussed approach where the already integrated flap undergoes additional distraction. Through the four cases reported here, we would like to demonstrate that the osteodistraction of the transplanted fibula free flap is a useful and efficient method of secondary augmentation for cases where the flap itself fails to produce the desired crestal height, and no other method is applicable. The cases show that the method allows outcomes that are highly satisfactory, both in the functional and esthetic sense.

Biomaterials for Periodontal and Peri-Implant Regeneration

Periodontal and peri-implant regeneration is the technique that aims to restore the damaged tissue around teeth and implants. They are surrounded by a different apparatus, and according to it, the regenerative procedure can differ for both sites. During the last century, several biomaterials and biological mediators were proposed to achieve a complete restoration of the damaged tissues with less invasiveness and a tailored approach. Based on relevant systematic reviews and articles searched on PubMed, Scopus, and Cochrane databases, data regarding different biomaterials were extracted and summarized. Bone grafts of different origin, membranes for guided tissue regeneration, growth factors, and stem cells are currently the foundation of the routinary clinical practice. Moreover, a tailored approach, according to the patient and specific to the involved tooth or implant, is mandatory to achieve a better result and a reduction in patient morbidity and discomfort. The aim of this review is to summarize clinical findings and future developments regarding grafts, membranes, molecules, and emerging therapies. In conclusion, tissue engineering is constantly evolving; moreover, a tailor-made approach for each patient is essential to obtain a reliable result and the combination of several biomaterials is the elective choice in several conditions.

Outcome Assessment for Surgical Reconstruction of Mandibular Continuity Defects

ABSTRACT

Mandibular continuity defects are associated with multiple functional and esthetic problems. Nonvascularized bone grafting is one of several surgical corrective techniques for such defects with good success predictability. This retrospective clinical study reviewed the outcome of this technique when applied in its 2 protocol variations while minimizing the effect of as many confounding factors as possible through the application of strict eligibility criteria. The surgical records of 16 patients constituted the final sample: 10 patients in the one-stage and 6 patients in the two-stage reconstruction groups. It was found that mandibular reconstruction with nonvascularized bone graft is a good first option as well as a viable alternative in the absence of free flap procedure facilities. Patients' initial expectations should be a crucial factor in deciding the appropriate surgical treatment protocol form the early planning stage. Standardizing success parameters in such cases could further improve objectivity and allow for multi-center research data pooling with reduced effect of heterogeneity featuring these complex injuries.

Patient-Specific Surgical Implant Using Cavity-Filled Approach for Precise and Functional Mandible Reconstruction

Mandibular reconstruction is a complicated task because of the complex nature of the regional anatomy. Computer-assisted tools are a promising means of improving the precision and safety of such complex surgeries. The digital techniques utilized in the reconstruction of mandibular defects based on medical data, computer-aided-design approaches, and three-dimensional (3D) printing are widely used to improve the patient’s aesthetic appearance and function, as well as the accuracy and quality of diagnosis, and surgical outcomes. Nevertheless, to ensure an acceptable aesthetical appearance and functional outcomes, the design must be based on proper anatomical reconstruction, mostly done in a virtual environment by skilled design engineers. Mirroring is one of the widely used techniques in the surgical navigation and reconstruction of mandibular defects. However, there are some discrepancies and mismatches in the mirrored anatomical models. Hence, in order to overcome these limitations in the mirroring technique, a novel approach called the cavity-filled technique was introduced. The objective of this study was to compare the accuracy of the newly recommended cavity-filled technique with the widely used mirror reconstruction technique in restoring mandibular defects. A prominent 3D comparison technique was employed in this work, where the resected and the reconstructed mandibles were superimposed to quantify the accuracy of the two techniques. From the analysis, it can be inferred that the cavity-filled technique with a root-mean-square value of 1.1019 mm produced better accuracy in contrast to the mirroring approach, which resulted in an error of 1.2683 mm. Consequently, by using the proposed cavity-filled design, the discrepancy between the reconstruction plate and the bone contour was mitigated. This method, owing to its high precision, can decrease the number of adjustments and the time of surgery, as well as ensure a quick recovery time with better implant tissue in-growth.

Photobiomodulation Therapy (PBMT) Applied in Bone Reconstructive Surgery Using Bovine Bone Grafts: A Systematic Review

The use of low-level laser therapy (LLLT) with biomodulatory effects on biological tissues, currently called photobiomodulation therapy (PBMT), assists in healing and reduces inflammation. The application of biomaterials has emerged in bone reconstructive surgery, especially the use of bovine bone due to its biocompatibility. Due to the many benefits related to the use of PBMT and bovine bones, the aim of this research was to review the literature to verify the relationship between PBMT and the application of bovine bone in bone reconstruction surgeries. We chose the PubMed/MEDLINE, Web of Science, and Scopus databases for the search by matching the keywords: "Bovine bone AND low-level laser therapy", "Bovine bone AND photobiomodulation therapy", "Xenograft AND low-level laser therapy", and "Xenograft AND photobiomodulation therapy". The initial search of the three databases retrieved 240 articles, 18 of which met all inclusion criteria. In the studies concerning animals (17 in total), there was evidence of PBMT assisting in biomaterial-related conduction, formation of new bone, bone healing, immunomarker expression, increasing collagen fibers, and local inflammation reduction. However, the results disagreed with regard to the resorption of biomaterial particles. The only human study showed that PBMT with bovine bone was effective for periodontal regeneration. It was concluded that PBMT assists the process in bone reconstruction when associated with bovine bone, despite divergences between applied protocols.

A Modified Method Using Double Computed Tomography Scan Procedure to Maintain Mandibular Width in Mandibular Reconstruction

OBJECTIVE

The purpose of this study was to evaluate the use of a modified template system and double computed tomography scan procedure to maintain mandibular width in cases of mandibular reconstruction.

STUDY DESIGN

Ten patients who underwent mandibular reconstruction with a fibular flap were enrolled. The surgeries were planned with a computer-aided surgical simulation (CASS) planning method. Following double computed tomography scan procedure, the template system was designed in a computer and was fabricated using a three-dimensional printing technique. The cutting guides were designed with the holes of the conventional reconstruction plate on the remnant mandibular segments. After surgery, the outcome evaluation was compared by first superimposing the post-operative computed tomography model onto the planned model and then measuring the differences between the planned and actual outcomes.

RESULTS

All surgeries were completed successfully using the template system. With the use of the templates, the largest linear root-mean-square deviation (RMSD) between the planned and post-operative remnant segments was 1.01 mm, and the largest angular RMSD was 4.05°.

CONCLUSIONS

The authors conclude that this template system and double computed tomography scan procedure provides a reliable method to maintain mandibular width in mandibular reconstruction using a fibular flap.

Histological Analysis of Bone Repair in Mandibular Body Osteotomy Using Internal Fixation System in Three Different Gaps without Bone Graft in an Animal Model

The aim was to analyze histologically the bone repair in a mandibular osteotomy model with different gaps between the segments. Nine male rabbits who underwent osteotomies on the mandibular body were fixed with a 1.5 system plate and no bone graft; group 1 (2 mm gap between segments), group 2 (5 mm gap between segments), and group 3 (8 mm gap between segments) were included. After 8 weeks they were euthanized and the sample was processed for histological analysis. Group 1 showed advanced bone repair with cartilaginous tissue and cancellous bone, showing osteoblasts and type III collagenous fibers. In group 2, a more delayed ossification was observed, with an extensive area of peripheral ossifying cartilage and chondrocytes in greater number at the center of the defect; group 3 showed no evidence of ossification with fibrous tissue, a very low level of chondrocytes, and some bone sequestrate. We can conclude that, in this animal model, 2 or 5 mm gap in the osteotomy could be repaired as bone when fixation is used. The size of the gap is an important factor for the use of bone grafts considering endochondral ossification. This model can be used for graft analysis and related technologies.

Successful Management of a Gigantic Ameloblastic Fibroma: A 12-Year Follow-up

An ameloblastic fibroma (AF) is a benign mixed odontogenic tumor that mainly affects patients in the first and second decades of life. It is usually associated with an impacted tooth, commonly the first or second permanent molar. We present a case of an 11-year-old male patient diagnosed with AF, showing well-defined borders almost completely affecting the body and inferior alveolar nerve (IAN) branch on the right side of the mandible and displacing teeth 46 and 47 associated with the lesion. The treatment included conservative surgery, with oral rehabilitation, including IAN lateralization, implant placement without sensorial alteration, and posterior rehabilitation, performed after 10 years of follow-up. Rehabilitation with implants is a safe and effective procedure for the prosthetic rehabilitation of the posterior atrophic mandible. However, sensorial alteration of the IAN occurs in 100% of cases and tends to regress with time or may be permanent in few cases.

Application of a Bioactive/Bioresorbable Three-Dimensional Porous Uncalcined and Unsintered Hydroxyapatite/Poly-D/L-lactide Composite with Human Mesenchymal Stem Cells for Bone Regeneration in Maxillofacial Surgery: A Pilot Animal Study

A novel three-dimensional (3D) porous uncalcined and unsintered hydroxyapatite/poly-d/l-lactide (3D-HA/PDLLA) composite demonstrated superior biocompatibility, osteoconductivity, biodegradability, and plasticity, thereby enabling complex maxillofacial defect reconstruction. Mesenchymal stem cells (MSCs)-a type of adult stem cell-have a multipotent ability to differentiate into chondrocytes, adipocytes, and osteocytes. In a previous study, we found that CD90 (Thy-1, cluster of differentiation 90) and CD271 (low-affinity nerve growth factor receptor) double-positive cell populations from human bone marrow had high proliferative ability and differentiation capacity in vitro. In the present study, we investigated the utility of bone regeneration therapy using implantation of 3D-HA/PDLLA loaded with human MSCs (hMSCs) in mandibular critical defect rats. Microcomputed tomography (Micro-CT) indicated that implantation of a 3D-HA/PDLLA-hMSC composite scaffold improved the ability to achieve bone regeneration compared with 3D-HA/PDLLA alone. Compared to the sufficient blood supply in the mandibular defection superior side, a lack of blood supply in the inferior side caused delayed healing. The use of Villanueva Goldner staining (VG staining) revealed the gradual progression of the nucleated cells and new bone from the scaffold border into the central pores, indicating that 3D-HA/PDLLA loaded with hMSCs had good osteoconductivity and an adequate blood supply. These results further demonstrated that the 3D-HA/PDLLA-hMSC composite scaffold was an effective bone regenerative method for maxillofacial boney defect reconstruction.

Using a Bilobed Trapezius Myocutaneous Flap and a Scapula Osteomyocutaneous Flap to Reconstruct Through-and-Through Defects of the Hemimandible After Debridement of Advanced Mandibular Osteoradionecrosis

OBJECTIVE

The purpose of this study was to evaluate the outcomes of reconstructing through-and-through defects of the hemimandible after debridement of advanced mandibular osteoradionecrosis (ORN) with bilobed trapezius myocutaneous flaps and scapula osteomyocutaneous flaps.

METHODS

Six patients with grade III mandibular ORN were treated with debridement of lesions. Type IIb soft tissue and type H hemimandible defects after surgery were reconstructed using bilobed trapezius myocutaneous flaps and scapula osteomyocutaneous flaps including the acromion, spine, and part of the medial scapular border based on the transverse cervical vessels.

RESULTS

No flap failure occurred. Two patients experienced minor complications; one showed wound dehiscence at the donor site, and one showed minor plate exposure. No patient required nasogastric tube feeding or a permanent tracheotomy. The appearance of the face and neck was satisfactory or acceptable in all patients. No patient showed severely limited range of motion in the upper limb. The patients were followed for 8 to 22 months; at the end of follow-up, all patients were living with no recurrence evidence of mandibular ORN or nasopharyngeal carcinoma.

CONCLUSIONS

The bilobed trapezius myocutaneous flap and scapula osteomyocutaneous flap based on transverse cervical vessels may be an effective approach to reconstruct through-and-through defects of the hemimandible and to provide satisfactory or acceptable functional and esthetic outcomes after debridement of advanced mandibular ORN.

Reconstruction of Mandibular Contour Using Individualized High-Density Porous Polyethylene (Medpor®) Implants Under the Guidance of Virtual Surgical Planning and 3D-Printed Surgical Templates

BACKGROUND

The mandibular contour plays a significant role in the beautiful and youthful look but the reconstruction remains a challenging problem. The objective of this study was to evaluate the use of individualized high-density porous polyethylene (Medpor^®) implants for comprehensive reconstruction of mandibular contour with the aid of computer-aided design/computer-aided manufacturing (CAD/CAM).

METHODS

From 2010 to 2014, 12 patients with mandibular contour deformities were enrolled in our retrospective study. Mandible models and individualized surgical templates were fabricated by three-dimensional (3D) printing and Medpor^® implants were made according to the surgical templates. The Medpor^® implants were used for both unilateral and bilateral mandibular contour deformities. In four cases, simultaneous mandibular orthognathic surgery was performed with unilateral mandibular contour reconstruction.

RESULTS

Eleven patients had a reposeful postoperative recovery with no complication. Delayed infection was shown in one patient and the Medpor^® implant was removed. All the 11 patients had the mandibular contour reconstructed satisfactorily.

CONCLUSION

The technique and cases presented demonstrate the utility of Medpor^® implants with CAD/CAM in comprehensive mandibular contour reconstruction.

LEVEL OF EVIDENCE IV

This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Effect of low-level laser therapy on the healing of sites grafted with coagulum, deproteinized bovine bone, and biphasic ceramic made of hydroxyapatite and β-tricalcium phosphate. In vivo study in rats

OBJECTIVE

The aim of this study was to evaluate the effect of low-level laser therapy (LLLT) on the healing of biomaterial graft areas (i.e., coagulum, deproteinized bovine bone, and biphasic ceramics comprising hydroxyapatite and β-tricalcium phosphate).

MATERIAL AND METHODS

Ninety rats were divided into two groups according to laser irradiation use (λ 808 nm, 100 mW, φ ∼600 μm, seven sessions with 28 J of irradiation dose in total): a laser group and a control group. Each of these groups was divided into three subgroups of 15 animals each according to the type of biomaterial used: Coagulum (COA), deproteinized bovine bone (DBB), and hydroxyapatite/β-tricalcium phosphate (HA/βTCP). Biomaterials were inserted into Teflon domes, and these domes were grafted to the lateral aspect of the mandibular branch of the rats. The animals were sacrificed after 30, 60, and 90 days. Scarring patterns were evaluated by microtomography and histometry. The expression levels of BMP2, osteocalcin (OCN), and alkaline phosphatase (ALP) were evaluated by immunohistochemistry. The mRNA expression levels of ALP, BMP2, Jagged1, Osterix, Runx2, and TGFβ1 were determined by RT-qPCR.

RESULTS

The animals treated with LLLT exhibited increased mineralized tissues and bone, particularly after 90 days. These increases were associated with increased BMP2, OCN, and ALP protein expression and ALP, BMP2, and Jagged1 mRNA expression.

CONCLUSION

LLLT improved the osteoconductive potential of DBB and HA/βTCP grafts and bone formation in ungrafted areas. Lasers Surg. Med. © 2018 Wiley Periodicals, Inc.

Reconstruction of the Three-Dimensional Mandibulofacial Defects Using a Single Cutaneous Perforator-Based Fibula Osteocutaneous Flap

The reconstruction of the mandibulofacial defects is a difficult task when there are full-thickness cheek defects involving mandible, inner mucosa and outer skin. There are several reconstructive options for the coverage of large defects, but most of the methods are complicated, and time- and effort-consuming. We hereby present a case of fibula osteocutaneous flap based on a single peroneal artery perforator in the reconstruction of a three-dimensional mandibulofacial defects.

Rib Composite Flap With Intercostal Nerve and Internal Thoracic Vessels for Mandibular Reconstruction

Purpose:

The purpose of this study was to present the outcome and discuss the feasibility of rib composite flap with intercostal nerve and internal thoracic vessels for reconstructing mandibular defect.

Methods:

Rib composite flaps have been used in 82 patients for reconstructing benign tumor-caused large mandibular defects: 66 of the 82 patients were reconstructed using rib composite flap with intercostal nerve and internal thoracic vessels, whereas the other 16 patients were reconstructed using rib composite flap with internal thoracic vessels, without intercostal nerve. After operation, clinical observation, imageological examination, and sensory detection were used to evaluate the effect of reconstruction.

Results:

All rib composite flaps with intercostal nerve and internal thoracic vessels were successfully harvested and transplanted. Both immediate and long-term examination showed good appearance reconstruction. All followed-up patients conveyed good satisfaction degree with function and appearance reconstruction. Postoperative panoramic x-ray examination showed new bone formation between the transplanted rib and mandibular stump. Good recoveries of mandibular nerve sensory were observed when followed up after reconstruction surgery.

Conclusions:

Rib composite flap with intercostal nerve and internal thoracic vessels could be a promising method for reconstruction of mandibular defects.

Outcomes of Anatomic Reconstruction of Gunshot-Inflicted Lower Face Defects by Free Osteoseptocutaneous Fibula Flap and Expanded or Nonexpanded Temporal Scalp Flap Combination in Males

Reconstruction of gunshot-inflicted composite lower face defects is a challenge for plastic surgeons. Functional and aesthetic repair of such defects mostly requires free or pedicled flap applications or combinations of both.In this study, the authors evaluated 7 males with gunshot-inflicted composite mandibular defects. All patients underwent reconstruction with a free osteoseptocutaneous fibula flap (FOCF) for the composite mandibular defect and a pre or nonexpanded temporal artery-based scalp flap for beardless facial skin. All patients were evaluated aesthetically and functionally with a postoperative evaluation scale. Average patient follow-up time was 3.5 years.All FOCFs survived completely. Expander exposition was observed in 2 preexpanded temporal scalp flaps. The problem was solved by rapid expansion and early flap application. All patients had acceptable functional and aesthetic results.In conclusion, the scalp flap should be considered in male beardless skin reconstruction due to its ease of application, reliability, and proximity to the defect. Preexpansion of this flap can decrease donor area morbidities. Moreover, the FOCF and scalp flap combination is a convenient procedure for gunshot-inflicted lower face defects, and such procedures produce good aesthetic and functional long-term outcomes.

Curvilinear Segmental Mandibular Reconstruction Utilizing Distraction Osteogenesis and Early Open Callus Manipulation

Supplemental Digital Content is available in the text.

The authors present a new technique for reconstruction of large curvilinear mandibular defects with distraction osteogenesis and early open callus manipulation. In phase 1, transport disks are created from mandibular bone and distracted across the entire length of the defect, without the restriction from a mandible plate fixation. This allows for full-length distraction until enough regenerate is obtained to reconstruct the defect without the need for additional bone grafts. Taking advantage of the soft moldable regenerate, the second and final operative procedure allows for the manipulation, repositioning, and fixation of the transported segments in the ideal position creating perfect tridimensional form and symmetry of the mandible arch. In addition, the consolidation phase is shortened by the early removal of distractors, substantially reducing the total length of treatment. This article describes 2 clinical cases treated according to this technique, one with a 6-cm mandibular defect where a sagittal plane manipulation was performed, and the other with a 7-cm defect and axial plane manipulation. Five years postsurgery, both patients had achieved full stable reconstruction without the need for bone grafting, and had obtained good facial symmetry, with no recorded complications. This technique serves to establish bone transport as a valuable alternative to bone free flaps in the reconstruction of large curvilinear segmental mandibular defects.

Efficacy of Standard Costochondral Grafting in Patients With Bilateral Craniofacial Microsomia

Craniofacial microsomia remains the second most common craniofacial deformity after cleft lip and palate. Mandibular pathology has been classically scored from type I to type III by the modified Pruzansky-Kaban classification. The authors report a case of a 5-year-old patient with Goldenhar syndrome and bilateral type III craniofacial macrosomia. The patient had absence of bilateral glenoid fossas, condyles, coronoids, and rami as well as hypoplasia of the symphysis, parasymphysis, and mandibular body. Reconstruction was performed using 2 costochondral rib autografts to reconstruct a ramus and assist in the development of a neo-glenoid fossa at the cranial base. An additional portion of costal rib graft was used to augment the deficient symphysis. The patient was placed in class III occlusion postoperatively using maxillo-mandibular fixation screws and heavy elastics. The bone grafts healed without complications with no evidence of ankylosis, nonunion, or resorption to date. For the most severe forms of craniofacial microsomia, costochondral grafting remains an effective initial technique for lengthening the hypoplastic mandible and providing a foundation for future distraction.

Resilience Through Squamous Cell Carcinoma and Rhabdomyosarcoma of Oral Cavity: A Unique Case Report

Rhabdomyosarcoma (RMS) is a soft tissue neoplasm of mesenchymal origin. It is a commonly encountered malignant tumor amongst pediatric patients, yet relatively rare in adults. It usually involves the head and neck region, genitourinary organs and retroperitoneal structures. In adults, the most commonly affected area is the head and neck region. We present here a case of a 30-year-old male patient with a primary squamous cell carcinoma of the tongue (T1, N0, M1), successfully cured with surgery and chemoradiotherapy and later on development of metachronous ipsilateral lesion on the left lower alveolus. Biopsy was consistent with spindle cell RMS. Immunohistochemistry demonstrated positivity for desmin, vimentin and myogenin, thus confirming the mesenchymal origin. With the best of our literature search, this is an exceptional case presenting two malignant lesions with diverse genetic origins, diagnosed at stage 1 and giving a favorable outcome.