Experimental studies of bone mechanoadaptation: bridging in vitro and in vivo studies with multiscale systems

Tendon cell and tissue culture: Perspectives and recommendations

The wide variety of cell and tissue culture systems used to study and engineer tendons can make it difficult to choose the best approach and "optimal" culture conditions to test a given hypothesis. Therefore, a breakout session was organized at the 2022 ORS Tendon Section Meeting that focused on establishing a set of guidelines for conducting cell and tissue culture studies of tendon. This paper summarizes the outcomes of that discussion and presents recommendations for future studies. In the case of studying tendon cell behavior, cell and tissue culture systems are reductionist models in which the culture conditions should be strictly defined to approximate the in vivo condition as closely as possible. In contrast, for tissue engineering tendon replacements, the culture conditions do not need to replicate native tendon, but the outcome measures for success should be narrowly defined for the specific clinical application. Common recommendations for both applications are that researchers should perform a baseline phenotypic characterization of the cells that are ultimately used for experimentation. For models of tendon cell behavior, culture conditions should be well justified by existing literature and meticulously reported, tissue explant viability should be assessed, and comparisons to in vivo conditions should be made to determine baseline physiological relevance. For tissue engineering applications, the functional/structural/compositional outcome targets should be defined by the specific tendons they seek to replace, with key biologic and material properties prioritized for construct assessment. Lastly, when engineering tendon replacements, researchers should utilize clinically approved cGMP materials to facilitate clinical translation.

Effects of in vivo fatigue-induced microdamage on local subchondral bone strains

Biomechanical strain is a major stimulus of subchondral bone (SCB) tissue adaptation in joints but may also lead to initiation and propagation of microcracks, highlighting the importance of quantifying the intratissue strain in subchondral bone. In the present study, we used micro computed tomography (μCT) imaging, mechanical testing, and digital image correlation (DIC) techniques to evaluate the biomechanical strains in equine SCB under impact compression applied through the articular surface. We aimed to investigate the effects of in vivo accumulated microdamage in equine SCB on the distribution of mechanical impact strain through the articular cartilage. Under the applied strain of 2.0 ± 0.1% (mean ± standard deviation, n=15) to the articular surface of cartilage-bone plugs, the overall thickness of the SCB developed eSCBOverall = 0.7 ± 0.2% in all specimens. Contours of high strains in specimens without microdamage (NDmg) aligned parallel to the cartilage-bone interface with peak tensile, ϵt, and compressive, ϵc, strains of 0.5 ± 0.3% and 1.2 ± 0.4%, respectively at the time of peak compression (n=7). In damaged specimens (Dmg), contours of high strains aligned with the cracks in the imaged plane with peak strains of ϵt= 1.2 ± 0.8% and ϵc= 3.5 ± 2.2%, respectively (n=7). Microdamage was the main predictor of the normalised compressive and tensile strains across the SCB thickness. Results of multivariable analyses revealed presence of microdamage, distance from the articular surface and TMD were the main predictors of normalised compressive and tensile strain. Strain was greater in the superficial bone, particularly for specimens with microdamage. In vivo fatigue-induced microdamage is an important predictor of local subchondral bone strains.

In vitromodel to study confined osteocyte networks exposed to flow-induced mechanical stimuli

Osteocytes are considered the primary mechanical sensor in bone tissue and orchestrate the coupled bone remodeling activity of adjacent osteoblast and osteoclast cells.In vivoinvestigation of mechanically induced signal propagation through networks of interconnected osteocytes is confounded by their confinement within the mineralized bone matrix, which cannot be modeled in conventional culture systems. In this study, we developed a new model that mimics thisin vivoconfinement using gelatin methacrylate (GelMA) hydrogel or GelMA mineralized using osteoblast-like model cells. This model also enables real-time optical examination of osteocyte calcium (Ca2+) signaling dynamics in response to fluid shear stimuli cultured under confined conditions. Using this system, we discovered several distinct and previously undescribed patterns of Ca2+responses that vary across networks of interconnected osteocytes as a function of space, time and connectivity. Heterogeneity in Ca2+signaling may provide new insights into bone remodeling in response to mechanical loading. Overall, such a model can be extended to study signaling dynamics within cell networks exposed to flow-induced mechanical stimuli under confined conditions.

The role of cell-matrix interactions in connective tissue mechanics

Living tissue is able to withstand large stresses in everyday life, yet it also actively adapts to dynamic loads. This remarkable mechanical behaviour emerges from the interplay between living cells and their non-living extracellular environment. Here we review recent insights into the biophysical mechanisms involved in the reciprocal interplay between cells and the extracellular matrix and how this interplay determines tissue mechanics, with a focus on connective tissues. We first describe the roles of the main macromolecular components of the extracellular matrix in regards to tissue mechanics. We then proceed to highlight the main routes via which cells sense and respond to their biochemical and mechanical extracellular environment. Next we introduce the three main routes via which cells can modify their extracellular environment: exertion of contractile forces, secretion and deposition of matrix components, and matrix degradation. Finally we discuss how recent insights in the mechanobiology of cell-matrix interactions are furthering our understanding of the pathophysiology of connective tissue diseases and cancer, and facilitating the design of novel strategies for tissue engineering.

Ex Vivo Organ Cultures as Models to Study Bone Biology

The integrity of the skeleton is maintained by the coordinated and balanced activities of the bone cells. Osteoclasts resorb bone, osteoblasts form bone, and osteocytes orchestrate the activities of osteoclasts and osteoblasts. A variety of in vitro approaches has been used in an attempt to reproduce the complex in vivo interactions among bone cells under physiological as well as pathological conditions and to test new therapies. Most cell culture systems lack the proper extracellular matrix, cellular diversity, and native spatial distribution of the components of the bone microenvironment. In contrast, ex vivo cultures of fragments of intact bone preserve key cell-cell and cell-matrix interactions and allow the study of bone cells in their natural 3D environment. Further, bone organ cultures predict the in vivo responses to genetic and pharmacologic interventions saving precious time and resources. Moreover, organ cultures using human bone reproduce human conditions and are a useful tool to test patient responses to therapeutic agents. Thus, these ex vivo approaches provide a platform to perform research in bone physiology and pathophysiology. In this review, we describe protocols optimized in our laboratories to establish ex vivo bone organ cultures and provide technical hints and suggestions. In addition, we present examples on how this technical approach can be employed to study osteocyte biology, drug responses in bone, cancer-induced bone disease, and cross-talk between bone and other organs © 2020 The Authors. JBMR Plus published by Wiley Periodicals, Inc. on behalf of American Society for Bone and Mineral Research.

The Ex Vivo Organ Culture of Bone

The ex vivo organ culture of bone provides many of the advantages of both the whole organism and isolated cell strategies and can deliver valuable insight into the network of processes and activities that are fundamental to bone and cartilage biology. Through maintaining the bone and/or cartilage cells in their native environment, this model system provides the investigator with a powerful experimental protocol to address specific facets of skeletal growth and development. In this chapter, we outline the basic protocols and possible readouts of organ culture models to replicate; (a) linear bone growth (murine metatarsal culture model), (b) bone and cartilage metabolism (murine femoral head culture model), (c) bone response to mechanical stimulation (bovine trabecular core culture model), and (d) bone resorption and formation (murine calvaria culture model).

The expression profile of genes involved in osteoclastogenesis detected in whole blood of Arabian horses during 3 years of competing at race track

One of the most significant reason of economic loss on race track performance is lame in performed horses. Primarily, due to the failure within proper bone maintenance during conditioning in young horses. The training overload causes bone turnover disturbances in homeostasis between bone resorption and bone formation which promote the bone loss. Within our study we investigated training induced changes in transcript abundance of genes (NFATc1, CTSK, DAP12, CLEC5A, IL6ST, VAV3) involved in osteoclastogenesis hence bone resorption, in whole blood of Arabian horses. The expression pattern of all analysed genes varied depend of exercise intense activity. All training stages generate similar response to training whatever season was. The initial training had greater effect on expression pattern than increased, prolonged, established conditioning. Notwithstanding, the significant increase of transcript abundance of all investigated genes was observed during period of starts with racing competition. There is no biomarker known with highly significant accuracy according to degree of articular cartilage or bone disease in a single joint. Thus, the markers presented in our report, poses the potential to be further investigate as useful tool for bone turnover.

Lab-on-a-chip platforms for quantification of multicellular interactions in bone remodeling

Researchers have been using lab-on-a-chip systems to isolate factors for study, simulate laboratory analysis and model cellular, tissue and organ level processes. The technology is increasing rapidly, but the bone field has been slow to keep pace. Novel models are needed that have the power and flexibility to investigate the elegant and synchronous multicellular interactions that occur in normal bone turnover and in disease states in which remodeling is implicated. By removing temporal and spatial limitations and enabling quantification of functional outcomes, the platforms should provide unique environments that are more biomimetic than single cell type systems while minimizing complex systemic effects of in vivo models. This manuscript details the development and characterization of lab-on-a-chip platforms for stimulating osteocytes and quantifying bone remodeling. Our platforms provide the foundation for a model that can be used to investigate remodeling interactions as a whole or as a standard mechanotransduction tool by which isolated activity can be quantified as a function of load.

Implantable Sensors for Regenerative Medicine

The translation of many tissue engineering/regenerative medicine (TE/RM) therapies that demonstrate promise in vitro are delayed or abandoned due to reduced and inconsistent efficacy when implemented in more complex and clinically relevant preclinical in vivo models. Determining mechanistic reasons for impaired treatment efficacy is challenging after a regenerative therapy is implanted due to technical limitations in longitudinally measuring the progression of key environmental cues in vivo. The ability to acquire real-time measurements of environmental parameters of interest including strain, pressure, pH, temperature, oxygen tension, and specific biomarkers within the regenerative niche in situ would significantly enhance the information available to tissue engineers to monitor and evaluate mechanisms of functional healing or lack thereof. Continued advancements in material and fabrication technologies utilized by microelectromechanical systems (MEMSs) and the unique physical characteristics of passive magnetoelastic sensor platforms have created an opportunity to implant small, flexible, low-power sensors into preclinical in vivo models, and quantitatively measure environmental cues throughout healing. In this perspective article, we discuss the need for longitudinal measurements in TE/RM research, technical progress in MEMS and magnetoelastic approaches to implantable sensors, the potential application of implantable sensors to benefit preclinical TE/RM research, and the future directions of collaborative efforts at the intersection of these two important fields.

Bone mechanobiology in mice: toward single-cell in vivo mechanomics

Mechanically driven bone (re)modeling is a multiscale process mediated through complex interactions between multiple cell types and their microenvironments. However, the underlying mechanisms of how cells respond to mechanical signals are still unclear and are at the focus of the field of bone mechanobiology. Traditionally, this complex process has been addressed by reducing the system to single scales and cell types. It is only recently that more integrative approaches have been established to study bone mechanobiology across multiple scales in which mechanical load at the organ level is related to molecular responses at the cellular level. The availability of mouse loading models and imaging techniques with improved spatial and temporal resolution has made it possible to track dynamic bone (re)modeling at the tissue and cellular level in vivo. Coupled with advanced computational models, the (re)modeling activities at the tissue scale can be associated with the mechanical microenvironment. However, methods are lacking to link the molecular responses of different cell types to their local mechanical microenvironment and bone (re)modeling activities occurring at the tissue scale. With recent improvements in "omics" technologies and single-cell molecular biology, it is now possible to sequence the complete genome and transcriptome of single cells. These technologies offer unique opportunities to comprehensively investigate the cellular transcriptional profiles within their specific microenvironment. By combining single-cell "omics" technologies with well-established tissue-scale models of bone mechanobiology, we propose a mechanomics approach to locally analyze the transcriptome of single cells with respect to their local 3D mechanical in vivo environment.

Effect of capsaicin-sensitive sensory neurons on bone architecture and mechanical properties in the rat hindlimb suspension model

Background/Objective

The participation of sensory neural regulation in bone metabolism has been widely studied. However, the physiological role of sensory neural regulation in the functional adaptation to weight bearing is not clear. This study was conducted to investigate the effect of capsaicin-induced sensory neuron lesions on cancellous architecture properties in a hindlimb suspension (HLS) model.

Methods

Thirty-two female rats were randomly assigned to four groups. Groups b and d underwent systemic capsaicin treatment, whereas Groups a and c were treated with vehicle. Then, Groups c and d were subjected to HLS, whereas Groups a and b were allowed hindlimbs full loading. The proximal trabecular and mid-shaft cortical bone structure were evaluated via microcomputed tomography, and the biomechanical properties of the tibial mid-shaft were assessed using the four-point bending test.

Results

The trabecular bone volume was reduced by 40% and 50% in Groups b and c, respectively, and was also reduced significantly in Group d. Trabecular thickness and trabecular separation in Group b were not significantly different from those of Group a. The cortical bone area fraction showed no significant difference among all groups. Compared with Group a, the ultimate strength in Group b decreased by 20.3%, whereas it did not change significantly in Group c.

Conclusion

The results suggest that capsaicin-sensitive sensory neurons play an important role in bone modelling. The effect of capsaicin is similar to HLS. However, HLS has no add-on effect to capsaicin in the reduction of bone density and mechanical properties.

Translational potential of this article: This study gives clues to the function of sensory neurons in bone modelling.

Integrated multiscale biomaterials experiment and modelling: a perspective

Advances in multiscale models and computational power have enabled a broad toolset to predict how molecules, cells, tissues and organs behave and develop. A key theme in biological systems is the emergence of macroscale behaviour from collective behaviours across a range of length and timescales, and a key element of these models is therefore hierarchical simulation. However, this predictive capacity has far outstripped our ability to validate predictions experimentally, particularly when multiple hierarchical levels are involved. The state of the art represents careful integration of multiscale experiment and modelling, and yields not only validation, but also insights into deformation and relaxation mechanisms across scales. We present here a sampling of key results that highlight both challenges and opportunities for integrated multiscale experiment and modelling in biological systems.