Preparation of chitosan/MCM-41-PAA nanocomposites and the adsorption behaviour of Hg(II) ions

Selective adsorption of Hg(ii) with diatomite-based mesoporous materials functionalized by pyrrole-thiophene copolymers: condition optimization, application and mechanism

A novel diatomite-based mesoporous material of MCM-41/co-(PPy-Tp) was prepared with MCM-41 as carrier and functionalized with the copolymer of pyrrole and thiophene. The physicochemical characteristics of the as-prepared materials were characterized by various characterization means. The removal behaviour of Hg(ii) was adequately investigated via series of single factor experiments and some vital influence factors were optimized via response surface methodology method. The results exhibit that diatomite-based materials MCM-41/co-(PPy-Tp) has an optimal adsorption capability of 537.15 mg g-1 towards Hg(ii) at pH = 7.1. The removal process of Hg(ii) onto MCM-41/co-(PPy-Tp) is controlled by monolayer chemisorption based on the fitting results of pseudo-second-order kinetic and Langmuir models. In addition, the adsorption of Hg(ii) ions onto MCM-41/co-(PPy-Tp) is mainly completed through forming a stable complex with N or S atoms in MCM-41/co-(PPy-Tp) by electrostatic attraction and chelation. The as-developed MCM-41/co-(PPy-Tp) displays excellent recyclability and stabilization, has obviously selective adsorption for Hg(ii) in the treatment of actual electroplating wastewater. Diatomite-based mesoporous material functionalized by the copolymer of pyrrole and thiophene exhibits promising application prospect.

Functionalized magnetic mesoporous silica/poly(m-aminothiophenol) nanocomposite for Hg(II) rapid uptake and high catalytic activity of spent Hg(II) adsorbent

Currently, magnetic mesoporous silica nanospheres have been employed widely as adsorbents due to their large surface area and easy recovery. Herein, the functionalized magnetic mesoporous silica/organic polymers nanocomposite (MMSP) was fabricated by the grafted poly(m-aminothiophenol) embedded the aminated magnetic mesoporous silica nanocomposite based on Fe₃O₄ magnetic core, which was shelled by mesoporous silica and further modified by (3-aminopropyl) triethoxysilane. The adsorption properties of as-developed MMSP were systematically explored by altering the experimental parameters. The results indicated that the adsorption capacity and removal percentage of the MMSP could reach 243.83 mg/g and 97.53% within only 10 min at pH 4.0, and the coexisting ions had no significant effect on the selective Hg(II) ions removal from aqueous solutions, meanwhile, the adsorbent recovered by a magnet still exhibited good adsorption performance after recycled 5 times. In addition, by analyzing experimental data, the adsorption process of Hg(II) ions belonged to spontaneous exothermic adsorption, and the possible adsorption mechanisms were proposed based on the pseudo-second-order model and Langmuir model. After adsorption study, the waste material adsorbed Hg(II) was developed as an efficient catalyst for transformation of phenylacetylene to acetophenone with yield of 97.06%. In this study, we designed an efficient and selective material for Hg(II) ions remove and provided a treatment of the post-adsorbed mercury adsorbent by converting the waste into an excellent catalyst, which reduced the economic and environmental impact from conventional adsorption techniques.

Synthesis of cross-linked poly(acrylic acid) nanogels in an aqueous environment using precipitation polymerization: unusually high volume change

For the first time, by using precipitation polymerization in an aqueous solution, a cross-linked poly(acrylic acid)-(pAA) nanogel was synthesized. pAA was synthesized and cross-linked with N,N'-methylenebisacrylamide (BIS) at 70°C in an acidified environment (pH 2) and containing 0.7 M NaCl using potassium persulfate as the initiator. Ionized pAA was soluble in water. The use of sodium chloride at low pH caused a decrease in the solubility of pAA and led to its precipitation and formation of cross-linked pAA nanogel. By using electron microscopies and light scattering techniques, the morphology, pH sensitivity and zeta potential of the obtained p(AA-BIS) nanogel were evaluated. The polymerization in an aqueous environment resulted in a very big swelling/shrinking coefficient (of approx. 4000) in response to pH and exhibited an unusually high negative zeta potential (of approx. -130 mV). These properties make the nanogel a very interesting sorbent and a construction material.

A biomimetic SiO2@chitosan composite as highly-efficient adsorbent for removing heavy metal ions in drinking water

Highly efficient adsorbents for drinking water purification are demanded since the contaminants are generally in a low concentration which makes it difficult for conventional adsorbents. Herein, we present a novel biomimetic SiO₂@chitosan composite as adsorbent with a high adsorption capability towards heavy metal ions including As(V) and Hg(II). The hollow leaf-like SiO₂ scaffold within the adsorbent has a stable chemical property; while on the surface SiO₂, the chitosan nanoparticle provide a large amount of active sites such as amino and hydroxyl groups for adsorbing heavy metal ions. The special SiO₂ structure also prevents the agglomeration and loss of chitosan, which enables the efficient contact between the functional groups of chitosan and heavy metal ions. The SiO₂@chitosan composite exhibits maximum adsorption capacities of 204.1 and 198.6 mg g^-1 towards Hg(II) and As(V), respectively. In addition, the removal efficiency reaches over 60% within 2 min. The adsorption performance enables the presented biomimetic adsorbent suitable for adsorbing low-concentration heavy metal ions, especially possessing a promising potential for drinking water purification.