Ag-doped ZnO nanorods embedded reduced graphene oxide nanocomposite for photo-electrochemical applications

Photocatalytic activity enhancement of nanostructured metal-oxides photocatalyst: a review

Nanostructured metal oxide semiconductors have emerged as promising nanoscale photocatalysts due to their excellent photosensitivity, chemical stability, non-toxicity, and biocompatibility. Enhancing the photocatalytic activity of metal oxide is critical in improving their efficiency in radical ion production upon optical exposure for various applications. Therefore, this review paper provides an in-depth analysis of the photocatalytic activity of nanostructured metal oxides, including the photocatalytic mechanism, factors affecting the photocatalytic efficiency, and approaches taken to boost the photocatalytic performance through structure or material modifications. This paper also highlights an overview of the recent applications and discusses the recent advancement of ZnO-based nanocomposite as a promising photocatalytic material for environmental remediation, energy conversion, and biomedical applications.

Synthesis and antibacterial activity of nanoenhanced conjugate of Ag-doped ZnO nanorods with graphene oxide

In this paper, we report a successful synthesis of ZnO nanorods using the microwave-assisted technique, solid-state reaction method was utilized for the preparation of Zn_1-xAg_xO (x = 0.05, 0.1), Hummer's modified method for graphene oxide (GO) along with the sonication method to prepare GO-based Ag-doped ZnO (Zn_1-xAg_xO/GO: x  = 0.05, 0.1) nanocomposites. These nanorods and nanocomposites were characterized by X-ray diffraction (XRD), Fourier-transform infrared (FTIR), high-resolution transmission electron microscopy (HRTEM), and Raman spectroscopy for structural properties, scanning electron microscopy (SEM) along with energy dispersive X-ray (EDX) spectroscopy for morphological analysis, and UV-Vis spectroscopy for optical properties. XRD, FTIR, and Raman measurements substantiated that each sample is well crystallized in the single-phase polycrystalline wurtzite hexagonal structure of ZnO. The average crystallite size is found to be in decreasing order ranges 40 nm to 29 nm, respectively, along with a significant reduction in the optical bandgap. The SEM images showed a clear evidence of nanorods of ZnO, while the EDX spectra verified the presence of Zn, Ag, O, and C elements in the synthesized samples with their nominal percentage. Furthermore, the prepared nanocomposites effectively inhibited the growth ofStaphylococcus aureus and Escherichia coli. In comparison to pure ZnO nanorods, GO-based Ag-doped ZnO nanorods showed improved antibacterial activity against both S. aureus and E. coli.

Influence of Ag on the Structural, Electrochemical, Antibacterial, and Photocatalytic Performance of the (CuO-Cu2O)Cu Nanocomposite

The cost-effective novel Ag-doped (1-7%) (CuO-Cu₂O)Cu (C3) heterostructured nanocomposites are successfully synthesized by the facile solution combustion process using the Leucas aspera extract as a green fuel. The structural properties of fabricated nanocomposites were well-characterized by specific spectral techniques for enhanced electrochemical sensor detection, antibacterial activities, and sunlight-driven photocatalytic dye decoloration studies. The existence of Ag⁺ ions has been confirmed by the appearance of two peaks of Ag 3d_5/2 (367.9 eV) and Ag 3d_3/2 (373.9 eV), with the chemical binding nature and exchange of the Ag⁺ state in the nanocomposite lattice as revealed by X-ray photoelectron spectroscopy analysis. The energy band gap value of the doped nanocomposite decreases from 2.2 to 1.8 eV, as measured by the UV-visible absorption spectral technique, hindering the recombination of electron-holes pairs by trapping e^- and h⁺. This result supports that the C3Ag5 nanocomposite has a great potential as a sunlight photocatalyst toward the Alizarin Red (AR) dye, for which an excellent degradation activity of 98% at 180 min was achieved compared to that of the host nanocomposite (78% at 180 min). The variation of redox peak potentials of the prepared graphite nanocomposite working electrode is an effective tool for paracetamol sensing activity in 0.1 M KCl using electrochemical spectral studies. In addition, the antibacterial activities of the C3Ag5 nanocomposite against Escherichia coli and Staphylococcus aureus were successfully studied. The C3Ag5 nanocomposite exhibited a better performance than C3. The increase in activity is attributed to the presence of Ag as a dopant.

Graphene oxide-incorporated silver-based photocatalysts for enhanced degradation of organic toxins: a review

Environmental contamination and scarcity of energy have been deepening over the last few decades. Heterogeneous photocatalysis plays a prominent role in environmental remediation. The failure of earlier metal oxide systems like pure TiO₂ and ZnO as stable visible-light photocatalysts demanded more stable catalysts with high photodegradation efficiency. Silver-based semiconductor materials gained popularity as visible-light-responsive photocatalysts with a narrow bandgap. But their large-scale usage in natural water bodies for organic contaminant removal is minimal. The factors like self-photocorrosion and their slight solubility in water have prevented the commercial use. Various efforts have been made to improve their photocatalytic activity. This review focuses on those studies in which silver-based semiconductor materials are integrated with carbonaceous graphene oxide (GO) and reduced graphene oxide (RGO). The decoration of Ag-based semiconductor components on graphene oxide having high-surface area results in binary composites with enhanced visible-light photocatalytic activity and stability. It is found that the introduction of new efficient materials further increases the effectiveness of the system. So binary and ternary composites of GO and Ag-based materials are reviewed in this paper.

Incorporation of Ag-doped ZnO nanorod through Graphite hybridization: Effective approach for degradation of Ciprofloxacin

To remove the Ciprofloxacin (CIP) from aqueous solution, ZnO-Ag-Gp nanocomposite exhibited efficient photocatalytic properties. The biopersistent CIP is pervasive in surface water and also hazardous to human and animal health. This study utilized the hydrothermal technique to prepare Ag-doped ZnO hybridizing Graphite (Gp) sheet (ZnO-Ag-Gp) to degrade pharmaceuticals pollutant CIP from an aqueous medium. The structural and chemical compositions of the photocatalysts were determined by XRD, FTIR and XPS analysis. FESEM and TEM images revealed the nanorod ZnO with round shape Ag distributed on a Gp surface. The reduced bandgap of the ZnO-Ag-Gp sample enhanced the photocatalytic property which was measured by using UV-vis Spectroscopy. Dose optimization study found that 1.2 g/L is optimum for single (ZnO) and binary (ZnO-Gp and ZnO-Ag), where 0.3 g/L ternary (ZnO-Ag-Gp) exhibited maximum degradation efficiency (98%) within 60 min for 5 mg/L CIP. Pseudo 1st order reaction kinetics rate was found highest for ZnO-Ag-Gp (0.05983 min^-1) and it decreased to 0.03428 min^-1 for annealed sample. Removal efficiency decreased to only 90.97% at 5th run and hydroxyl radicals played a vital role to degrade CIP from aqueous solution. UV/ZnO-Ag-Gp will be a promising technique to degrade wide-ranging pharmaceutical antibiotics from the aquatic medium.

Rational construction of ZnO/CuS heterostructures-modified PVDF nanofiber photocatalysts with enhanced photocatalytic activity

PVDF/ZnO/CuS photocatalysts with ZnO/CuS heterojunctions were synthesized via electrospinning, hydrothermal, and ion-exchange techniques. As matrix materials, electrospun PVDF nanofibers are easy to be recycled and reused. ZnO nanorods anchored on PVDF nanofiber with high specific surface area provide abundant active reaction sites for photocatalysis. While the loaded CuS nanoparticles as a photosensitizer compensate the low quantum efficiency of ZnO and improve the visible-light photocatalytic efficiency. As a result, the PVDF/ZnO/CuS composited photocatalyst exhibits outstanding photocatalytic performance in exposure to UV and visible light owing to the suppressed recombination of electron-hole pairs and widened visible light absorption range. The kinetic constants of PVDF/ZnO/CuS nanocomposites under UV irradiation (9.01 × 10^-3 min^-1) and visible light (6.53 × 10^-3 min^-1) irradiation were 3.66 and 2.53 times higher than that of PVDF/ZnO (2.46 × 10^-3 min^-1 & 2.58 × 10^-3 min^-1), respectively. Furthermore, PVDF/ZnO/CuS nanocomposites demonstrate excellent robustness in terms of recycling and reuse, which is advantageous in practical applications.

Palladium and Graphene Oxide Doped ZnO for Aqueous Acetamiprid Degradation under Visible Light

Acetamiprid is a neonicotinoid insecticide widely used in pest control. In recent years, it has been considered as a contaminant in groundwater, lakes, and rivers. Photocatalysis under visible light radiation proved to be an effective process for getting rid of several organic pollutants. In the present work, photodegradation of aqueous acetamiprid was investigated over bare zinc oxide (ZnO) photocatalyst as well as ZnO doped with either palladium or palladium combined with graphene oxide. Both ZnO and doped-ZnO were synthesized via a microwave-assisted hydrothermal procedure. The obtained photocatalysts were characterized using different techniques. After 5 h of reaction at ambient temperature under visible light irradiation, acetamiprid conversions attained ca. 38, 82, and 98% in the presence of bare ZnO, Pd-doped ZnO and Pd-GO-doped ZnO photocatalysts, respectively, thus demonstrating the positive effect of Pd- and GO-doping on the photocatalytic activity of ZnO. In addition, Pd-GO-doped ZnO was shown to keep its activity even when it is recycled five times, thus proving its stability in the reaction medium.

Plant-Based Bimetallic Silver-Zinc Oxide Nanoparticles: A Comprehensive Perspective of Synthesis, Biomedical Applications, and Future Trends

The universal emphasis on the study of green nanotechnology has led to biologically harmless uses of wide-ranged nanomaterials. Nanotechnology deals with the production of nanosized particles with regular morphology and properties. Various researches have been directed on nanomaterial synthesis by physical, chemical, and biological means. Understanding the safety of both environment and in vivo, a biogenic approach particularly plant-derived synthesis is the best strategy. Silver-zinc oxide nanoparticles are most effective. Moreover, these engineered nanomaterials via morphological modifications attain improved performance in antimicrobial, biomedical, environmental, and therapeutic applications. This article evaluates manufacturing strategies for silver-zinc oxide nanoparticles via plant-derived means along with highlighting their broad range of uses in bionanotechnology.

Enhanced photocatalytic activity of ZnO hexagonal tube/r-GO composite on degradation of organic aqueous pollutant and study of charge transport properties

ZnO hexagonal tube and ZnO/r-GO nanocomposites were synthesized by hydrothermal method and the nanostructures were characterized by XRD, UV-DRS, PL, FTIR, FESEM, and TEM techniques. The main violet emission peak of the synthesized nanostructures is due to the transition between interstitial zinc and hole (valence band) of ZnO. The potential of ZnO/r-GO nanocomposite was evaluated using methyl orange (MO) and rhodamine-B (RhB), and the results were compared with the activity of synthesized ZnO nanostructures. More than 95% of MO and RhB were by ZnO/r-GO nanocomposite and it was found to be higher than that of ZnO hexagonal tube. The degradation MO and RhB were found to follow first-order kinetics and it has a rate constant of 7.68 × 10^-2and 7.83 × 10^-2 min^-1, respectively. These results are mainly due to the enhanced charge transport property. Trapping experiments show that superoxide radical anion and hydroxide radicals are chief species responsible for the degradation of MO and RhB. The chemical stability of the nanocomposite was evaluated by cycle test experiments and it reveals that the catalyst can be reused up to few cycles without considerable loss of photocatalytic activity. This work affords a simple stratagem to integrate ZnO hexagonal tubes and r-GO nanosheets to construct effective catalysts for the degradation of organic compounds.

A well-defined S-g-C3N4/Cu–NiS heterojunction interface towards enhanced spatial charge separation with excellent photocatalytic ability: synergetic effect, kinetics, antibacterial activity, and mechanism insights

A well-defined heterojunction among two dissimilar semiconductors exhibited enhanced photocatalytic performance owing to its capability for boosting the photoinduced electron/hole pair transportation. Therefore, designing and developing such heterojunctions using diverse semiconductor-based materials to enhance the photocatalytic ability employing various approaches have gained research attention. For this objective, g-C₃N₄ is considered as a potential photocatalytic material for organic dye degradation; however, the rapid recombination rate of photoinduced charge carriers restricts the widespread applications of g-C₃N₄. Henceforth, in the current study, we constructed a heterojunction of S-g-C₃N₄/Cu–NiS (SCN/CNS) two-dimensional/one-dimensional (2D/1D) binary nanocomposites (NCs) by a self-assembly approach. XRD results confirm the construction of 22% SCN/7CNS binary NCs. TEM analysis demonstrates that binary NCs comprise Cu–NiS nanorods (NRs) integrated with nanosheets (NSs) such as the morphology of SCN. The observed bandgap value of SCN is 2.69 eV; nevertheless, the SCN/CNS binary NCs shift the bandgap to 2.63 eV. Photoluminescence spectral analysis displays that the electron–hole pair recombination rate in the SCN/CNS binary NCs is excellently reduced owing to the construction of the well-defined heterojunction. The photoelectrochemical observations illustrate that SCN/CNS binary NCs improve the photocurrent to ∼0.66 mA and efficiently suppress the electron–hole pairs when compared with that of undoped NiS, CNS and SCN. Therefore, the 22% SCN/7CNS binary NCs efficiently improved methylene blue (MB) degradation to 99% for 32 min under visible light irradiation.

A well-refined heterointerface combination of a 2D/1D SCN/CNS binary heterojunction is developed.

Ag nanoparticles on ZnO nanoplates as a hybrid SERS-active substrate for trace detection of methylene blue

Decorating two-dimensional (2D) nanomaterials with nanoparticles provides an effective method to integrate their physicochemical properties. In this work, we present the hydrothermal growth process of 2D zinc oxide nanoplates (ZnO NPls), then silver nanoparticles (AgNPs) were uniformly distributed on the surface of ZnO NPls through the reduction procedure of silver nitrate with sodium borohydride to create a metal–semiconductor hybrid. The amount of AgNPs on the ZnO NPls' surface was carefully controlled by varying the volume of silver nitrate (AgNO₃) solution. Moreover, the effect of AgNPs on the surface-enhanced Raman scattering (SERS) property of ZnO NPls was thoroughly investigated by using methylene blue (MB) as the target molecule. After calculation, the maximum enhancement factor value for 10⁻⁴ M of MB reached 6.2 × 10⁶ for the peak at 1436 cm⁻¹ and the limit of detection was 10⁻⁹ M. In addition, the hybrid nanosystem could distinguish MB with good reproducibility over a wide range of concentrations, from 10⁻⁹ to 10⁻⁴ M. The SERS mechanism is well elucidated based on the chemical and electromagnetic mechanisms related to the synergism of ZnO and Ag in the enhancement of Raman signal. Abundant hot spots located at the gap between adjacent separate Ag nanoparticles and ZnO nanoplates which formed a strong local electromagnetic field and electron transfer between ZnO and Ag are considered to be the key factors affecting the SERS performance of our prepared ZnO/Ag substrates. In this research, we found high sensitivity of ZnO nanoplates/Ag nanoparticles in detecting MB molecules. This unique metal–semiconductor hybrid nanosystem is advantageous for the formation of Raman signals and is thus suitable for the trace detection of methylene blue.

Decorating two-dimensional (2D) nanomaterials with nanoparticles provides an effective method to integrate their physicochemical properties.

Enhanced photocatalytic activities of a hierarchical ZnO/V2C MXene hybrid with a close coupling heterojunction for the degradation of methyl orange, phenol and methylene blue dye

A hierarchical ZnO/V2C MXene hybrid exhibited enhanced photocatalytic performance due to its close coupling heterojunction facilitating photo-generated carrier transfer.

Construction of a binary S-scheme S-g-C3N4/Co-ZF heterojunction with enhanced spatial charge separation for sunlight-driven photocatalytic performance

A novel S-scheme photocatalyst system is constructed utilizing the hydrothermal technique and S-g-C3N4/Co-ZF binary material.

A vertically configured photocatalytic-microbial fuel cell for electricity generation and gaseous toluene degradation

A vertically configured photocatalytic-microbial fuel cell (photo-MFC) is developed by combining a nanodiamond-decorated ZnO (ZnO/ND) photocathode with a bioanode. The system can effectively couple the light energy with bioenergy to enhance the degradation of volatile organic compounds (VOCs) and boost electricity output. Results show that the composite system exhibits increased performance for toluene removal (60.65%), higher than those of individual parts (ZnO/ND-photocatalysis: 37.16%, MFC: 17.81%). Furthermore, its electrochemical performance is dramatically increased. The peak power density of 120 mW/m² and the current density of 1.07 A/m² are generated under light illumination, which are about 1.57-fold and 1.37-fold higher than that under dark (76 mW/m², 0.78 A/m²), respectively. Microbial community analysis demonstrates Proteobacteria and Firmicute are dominant phyla, implying they play important roles on accelerating the extracellular-electron transfer and toluene degradation. In addition, the underlying mechanism for toluene degradation in the photo-MFC system is preliminary explored. Our results suggest that the photo-MFC has great potential for simultaneous treatment of VOCs with energy recovery.

Unconventional plasmonic sensitization of graphene in mid-infrared

Light-matter interaction in graphene can be engineered and substantially enhanced through plasmonic sensitization, which has led to numerous applications in photodetection, sensing, photocatalysis and spectroscopy. The majority of these designs have relied on conventional plasmonic materials such as gold, silver and aluminum. This limits the implementation of such devices to the ultraviolet and visible regimes of the electromagnetic spectrum. However, for many practical applications, including those relevant to security and defense, the development of new strategies and materials for sensing and detection of infra red (IR) light is crucial. Here we use surface enhanced Raman spectroscopy (SERS), for direct visualization and estimation of enhanced light-matter interaction in graphene in the mid-IR regime, through sensitization by an unconventional plasmonic material. Specifically, we fabricate a hybrid device consisting of a single layer graphene and a two-dimensional array of nanodiscs of aluminum doped zinc oxide (AZO), which is a highly doped semiconductor, exhibiting plasmonic resonance in the mid-IR. We find that the enhancement in the SERS signal of graphene is of similar magnitude to what has been achieved previously in the visible using conventional plasmonic materials. Our results establish the potential of such hybrid systems for graphene-based optical and optoelectronic applications in the mid-IR.

Silver decorated 2D nanosheets of GO and MoS2serve as nanocatalyst for water treatment and antimicrobial applications as ascertained with molecular docking evaluation

In this work, synthesis of graphene oxide (GO) and reduced graphene oxide (rGO) was realized through a modified Hummers route. Different concentrations (5 and 10 wt%) of Ag were doped in MoS₂and rGO using a hydrothermal technique. Synthesized Ag-MoS₂and Ag-rGO were evaluated through XRD that confirmed the hexagonal structure of MoS₂along with the transformation of GO to Ag-rGO as indicated by a shift in XRD peaks while Mo-O bonding and S=O functional groups were confirmed with FTIR. Morphological information of GO and formation of MoS₂nanopetals as well as interlayer spacing were verified through FESEM and HRTEM respectively. Raman analysis was employed to probe any evidence regarding defect densities of GO. Optical properties of GO, MoS₂, Ag-rGO, and Ag-MoS₂were visualized through UV-vis and PL spectroscopy. Prepared products were employed as nanocatalysts to purify industrial wastewater. Experimental results revealed that Ag-rGO and Ag-MoS₂showed 99% and 80% response in photocatalytic activity. Besides, the nanocatalyst (Ag-MoS₂and Ag-rGO) exhibited 6.05 mm inhibition zones againstS. aureusgram positive (G+) and 3.05 mm forE. coligram negative (G-) in antibacterial activity. To rationalize biocidal mechanism of Ag-doped MoS₂NPs and Ag-rGO,in silicomolecular docking study was employed for two enzymes i.e.β-lactamase and D-alanine-D-alanine ligase B (ddlB) from cell wall biosynthetic pathway and enoyl-[acylcarrier-protein] reductase (FabI) from fatty acid biosynthetic pathway belonging toS. aureus. The present study provides evidence for the development of cost-effective, environment friendly and viable candidate for photocatalytic and antimicrobial applications.

Ultra-small zinc oxide nanosheets anchored onto sodium bismuth sulfide nanoribbons as solar-driven photocatalysts for removal of toxic pollutants and phtotoelectrocatalytic water oxidation

Heterostructured nanohybrids were prepared from sodium bismuth sulfide (NaBiS₂) and zinc oxide (ZnO) through hydrothermal process. The nanocomposite was used for tetracycline (TC) degradation as well as photoelectrochemical (PEC) water oxidation. Morphology and structural analyses were performed to confirm the dispersion of ultra-small ZnO nanosheets into the NaBiS₂ nanoribbons. By tuning the band gap, it was possible to degrade tetracycline toxic pollutant within 90 min under the simulated solar light irradiation, while PEC suggested a lower charge-transfer resistance, high photocurrent response, and exceptionally good stability. The highest photocurrent density of 0.751 mAcm^-2 vs. Ag/AgCl in 0.1 M Na₂SO₃ solution was observed under solar-light illumination. Detailed photocatalytic mechanisms for the degradation of TC and PEC water oxidation are discussed.

Enhancing the UV Emission in ZnO-CNT Hybrid Nanostructures via the Surface Plasmon Resonance of Ag Nanoparticles

The crystal quality and surface states are two major factors that determine optical properties of ZnO nanoparticles (NPs) synthesized through nonaqueous sol-gel routes, and both are strongly dependent on the growth conditions. In this work, we investigate the influence of the different growth temperatures (240 and 300 °C) on the morphology, structural and crystal properties of ZnO NP. The effects of conjoining ZnO NP with carbon nanotubes (CNT) and the role of surface states in such a hybrid nanostructure are studied by optical emission and absorption spectroscopy. We demonstrate that depending on the synthesis conditions, activation or passivation of certain surface states may occur. Next, silver nanoparticles are incorporated into ZnO-CNT nanostructures to explore the plasmon-exciton coupling effect. The observed enhanced excitonic and suppressed defect-related emissions along with blue-shifted optical band gap suggest an intricate interaction of Burstein-Moss, surface plasmon resonance and surface band-bending effects behind the optical phenomena in hybrid ZnO-CNT-Ag nanocomposites.

Core–shell hybrid structured rGO decorated ZnO nanorods synthesized via a facile chemical route with photosensitive properties

Two-dimensional graphene-based nanocomposites have gained much attention due to their promising applications in electronic and optoelectronic devices.

Eco-friendly synthesis and photocatalytic application of flowers-like ZnO structures using Arabic and Karaya Gums

Flowers-like ZnO structures were synthesized using Arabic Gum (AGZnO) or Karaya Gum (KGZnO). The AGZnO and KGZnO were characterized by X-ray diffractometry, Fourier Transformed Infrared, Scanning Electron Microscopy, Photoluminescence, nitrogen adsorption/desorption and diffuse reflectance techniques. The materials were tested in the discoloration of Methylene Blue (MB) dye under visible light and scavenger studies were also performed. The toxicity of the MB irradiated was investigated in bioassays with Artemia salina. The structural characterization demonstrated the formation of hexagonal ZnO. All samples presented flower-like morphology with presence of mesopores identified by BET method. The optical properties indicated band gap of 2.99 (AGZnO) and 2.76 eV (KGZnO), and emission in violet, blue and green emissions also were observed. The KGZnO demonstrated better photocatalytic performance than the AGZnO, and scavenger studies indicated that OH radicals are the main species involved in the degradation of the pollutant model. The photodiscoloration of MB solution did not demonstrate toxicity. Therefore, KGZnO is a promising material for photocatalysis application.

Hydrothermal Synthesis of Silver Decorated Reduced Graphene Oxide (rGO) Nanoflakes with Effective Photocatalytic Activity for Wastewater Treatment

Graphene oxide (GO) was obtained through modified hummers method, and reduced graphene oxide (rGO) was acquired by employing heat treatment. Various concentrations (2.5, 5, 7.5, and 10 wt. %) of silver (Ag) were incorporated in GO nanosheets by adopting hydrothermal approach. Synthesized Ag decorated rGO photocatalyst Ag/rGO was characterized using X-ray diffraction (XRD) to determine phase purity and crystal structure. XRD patterns showed the formation of GO to Ag/rGO. Molecular vibration and functional groups were determined through Fourier Transform Infrared spectroscopy (FTIR). Optical properties and a decrease in bandgap with insertion of Ag were confirmed with UV-Visible (Uv-Vis) spectrophotometer and photoluminescence (PL). Electronic properties and disorders in carbon structures were investigated through Raman spectroscopy that revealed the existence of characteristic bands (D and G). Surface morphology of prepared samples was examined with field emission scanning electron microscope (FESEM). Homogeneous distribution, size, and spherical shape of Ag NPs over rGO sheets were further confirmed with the help of high-resolution transmission electron microscope (HR-TEM). Dye degradation of doped and undoped samples was examined through Uv-Vis spectra. Experimental results indicated that photocatalytic activity of Ag@rGO enhanced with increased doping ratio owing to diminished electron-hole pair recombination. Therefore, it is suggested that Ag@rGO can be used as a beneficial and superior photocatalyst to clean environment and wastewater.

In Situ Charge Transfer at the Ag@ZnO Photoelectrochemical Interface toward the High Photocatalytic Performance of H2 Evolution and RhB Degradation

Designing an efficient hybrid structure photocatalyst for photocatalytic decomposition and hydrogen (H₂) evolution has been considered a great choice to develop renewable technologies for clean energy production and environmental remediation. Enhanced charge transfer (CT) based on the interaction between a noble metal and a semiconductor is a crucial factor influencing the movement of photogenerated electron-hole pairs. Herein, we focus on the recent advances related to plasmon-enhanced noble metals and the semiconductor nature to drive the photocatalytic H₂ production and photodegradation of the organic dye rhodamine B (RhB) under UV and visible light irradiation. Specifically, the combination of concerted catalysis and green nanoengineering strategies to design ZnO-based composite photocatalysts and their decoration with metallic Ag have been realized by the radio frequency (RF) sputtering technique at room temperature. This simultaneity enhances the interface coupling between Ag and ZnO and reduces the energy threshold. The creation of charge transfer in the heterojunction and Schottky barrier changes the photoelectronic properties of the as-synthesized Al-doped ZnO (AZO); afterward, these effects promote the migration, transportation, and separation of photoinduced charge carriers and enhance the light-harvesting efficiency. As a result, the as-synthesized AZO-20 hybrid nanostructure exhibits a photocurrent density of 2.5 mA/cm² vs Ag/AgCl, which is improved by almost 12 times compared with that of bare ZnO (0.2 mA/cm²). The hydrogen evolution rates of AZO-20 were ∼38 and ∼24 μmol/h under UV and visible light exposure, which are almost five- and tenfold higher than those of pristine ZnO, respectively. Additionally, the RhB degradation efficacies of the obtained AZO-20 were greater than almost 97 and 82% under UV and visible light illumination, respectively. The achieved apparent rate constant for the photocatalytic RhB decomposition was 0.014 min^-1, indicating that it is 14-fold than that in pristine ZnO (0.001 min^-1). Heterostructure AZO photocatalysts possess excellent practical stability in the water-splitting reaction and photocatalytic RhB decomposition, posing as promising candidates in practical works for pollution and energy challenges.

Effect of silver doping on antidiabetic and antioxidant potential of ZnO nanorods

BACKGROUND

Increasing resistance to available drugs and their associated side-effects have drawn wide attention towards designing alternative therapeutic strategies for control of hyperglycemia and oxidative stress. The roles of the sizes and shapes of the nanomaterials used in the treatment and management of Type 2 Diabetes Mellitus (T2DM) in preventing chronic hyperglycaemia and oxidative stress are investigated. We report specifically on the effects of doping silver (Ag) into the ZnO nanorods (ZnO:Ag NR's) as a rational drug designing strategy.

METHODS

Inhibition of porcine pancreatic α-amylase, murine pancreatic amylase, α-glucosidase, murine intestinal glucosidase and amyloglucosidase are checked for evaluation of antidiabetic potential. In addition, the radical scavenging activities of ZnO:Ag NR's against nitric oxide, DDPH and superoxide radicals are evaluated.

RESULTS

Quantitative radical scavenging and metabolic enzyme inhibition activities of ZnO:Ag NR's at a concentration of 100 μg/mL were found to depend on the amount of Ag doped in up to a threshold level (3-4 %). Circular dichroism analysis revealed that the interaction of the NR's with the enzymes altered their secondary conformation. This alteration is the underlying mechanism for the potent enzyme inhibition.

CONCLUSIONS

Enhanced inhibition of enzymes and scavenging of free radicals primarily responsible for reactive oxygen species (ROS) mediated damage, provide a strong scientific rationale for considering ZnO:Ag NR's as a candidate nanomedicine for controlling postprandial hyperglycaemia and the associated oxidative stress.

Antibacterial Property of Composites of Reduced Graphene Oxide with Nano-Silver and Zinc Oxide Nanoparticles Synthesized Using a Microwave-Assisted Approach

Graphene oxide (GO) composites with various metal nanoparticles (NPs) are attracting increasing interest owing to their broad scope in biomedical applications. Here, microwave-assisted chemical reduction was used to deposit nano-silver and zinc oxide NPs (Ag and ZnO NPs) on the surface of reduced GO (rGO) at the following weight percentages: 5.34% Ag/rGO, 7.49% Ag/rGO, 6.85% ZnO/rGO, 16.45% ZnO/rGO, 3.47/34.91% Ag/ZnO/rGO, and 7.08/15.28% Ag/ZnO/rGO. These materials were tested for antibacterial activity, and 3.47/34.91% Ag/ZnO/rGO and 7.08/15.28% Ag/ZnO/rGO exhibited better antibacterial activity than the other tested materials against the gram-negative bacterium Escherichia coli K12. At 1000 ppm, both these Ag/ZnO/rGO composites had better killing properties against both E. coli K12 and the gram-positive bacterium Staphylococcus aureus SA113 than Ag/rGO and ZnO/rGO did. RedoxSensor flow cytometry showed that 3.47/34.91% Ag/ZnO/rGO and 7.08/15.28% Ag/ZnO/rGO decreased reductase activity and affected membrane integrity in the bacteria. At 100 ppm, these two composites affected membrane integrity more in E. coli, while 7.08/15.28% Ag/ZnO/rGO considerably decreased reductase activity in S. aureus. Thus, the 3.47/34.91% and 7.08%/15.28% Ag/ZnO/rGO nanocomposites can be applied not only as antibacterial agents but also in a variety of biomedical materials such as sensors, photothermal therapy, drug delivery, and catalysis, in the future.

Preparation of ternary ZnO/Ag/cellulose and its enhanced photocatalytic degradation property on phenol and benzene in VOCs

The ZnO/Ag/cellulose composite (ZAC) with excellent photocatalytic activity of degrading benzene and phenol in VOCs has been successfully synthesized. EDS, TEM, XPS and UV-vis analyses show that the ZAC is a ternary composite. It is composed of Ag, ZnO and cellulose, where the cellulose works as the substrate to anchor the other two components. The X-ray diffraction patterns find well-crystallized ZnO nanoparticles. Multiple PL peaks in the visible region measured for ZAC, imply rich defects on ZnO. It is observed that Ag nanoparticles are mainly attached on ZnO in the composite, which would raise the separation efficiency of photogenerated electrons and holes. Photocatalytic degradation shows that ZAC is able to decompose almost 100% phenol and 19% benzene in VOCs under UV light irradiation (6 W) which is almost no harm to human body. Due to the renewable cellulose, our ternary composite ZAC imparts low-cost, easily recycled and flexible merits, which might be applied in the indoor VOCs treatment.