Evolution of flexible biting in hyperdiverse parasitoid wasps

A host driven parasitoid syndrome: Convergent evolution of multiple traits associated with woodboring hosts in Ichneumonidae (Hymenoptera, Ichneumonoidea)

The evolution of convergent phenotypes is of major interest in biology because of their omnipresence and ability to inform the study of evolutionary novelty and constraint. Convergent phenotypes can be combinations of traits that evolve concertedly, called syndromes, and these can be shaped by a common environmental pressure. Parasitoid wasps which use a wide variety of arthropod hosts have also repeatedly and convergently switched host use across their evolutionary history. They thus represent a natural laboratory for the evolution of trait syndromes that are associated with parasitism of specific hosts and host substrates. In this study, we tested the evolution of co-evolving characters in the highly diverse family Ichneumonidae associated with ovipositing in a specific and well-defined substrate: wood. Using a newly constructed phylogeny and an existing morphological dataset, we identified six traits correlated with the wood-boring lifestyle that demonstrate convergent evolution. At least one trait, the presence of teeth on the ovipositor, typically preceded the evolution of other traits and possibly the switch to parasitism of wood-boring hosts. For each trait, we provide a historical review of their associations with wood-boring parasitoids, reevaluate the function of some characters, and suggest future coding improvements. Overall, we demonstrate the convergent evolution of multiple traits associated with parasitism of woodboring hosts and propose a syndrome in a hyper diverse lineage of parasitoid wasps.

Bee morphology: A skeletomuscular anatomy of Thyreus (Hymenoptera: Apidae)

Although the knowledge of the skeletal morphology of bees has progressed enormously, a corresponding advance has not happened for the muscular system. Most of the knowledge about bee musculature was generated over 50 years ago, well before the digital revolution for anatomical imaging, including the application of microcomputed tomography. This technique, in particular, has made it possible to dissect small insects digitally, document anatomy efficiently and in detail, and visualize these data three dimensionally. In this study, we document the skeletomuscular system of a cuckoo bee, Thyreus albomaculatus and, with that, we provide a 3D atlas of bee skeletomuscular anatomy. The results obtained for Thyreus are compared with representatives of two other bee families (Andrenidae and Halictidae), to evaluate the generality of our morphological conclusions. Besides documenting 199 specific muscles in terms of origin, insertion, and structure, we update the interpretation of complex homologies in the maxillolabial complex of bee mouthparts. We also clarify the complicated 3D structure of the cephalic endoskeleton, identifying the tentorial, hypostomal, and postgenal structures and their connecting regions. We describe the anatomy of the medial elevator muscles of the head, precisely identifying their origins and insertions as well as their homologs in other groups of Hymenoptera. We reject the hypothesis that the synapomorphic propodeal triangle of Apoidea is homologous with the metapostnotum, and instead recognize that this is a modification of the third phragma. We recognize two previously undocumented metasomal muscle groups in bees, clarifying the serial skeletomusculature of the metasoma and revealing shortcomings of Snodgrass' "internal-external" terminological system for the abdomen. Finally, we elucidate the muscular structure of the sting apparatus, resolving previously unclear interpretations. The work conducted herein not only provides new insights into bee morphology but also represents a source for future phenomic research on Hymenoptera.

How many specimens make a sufficient training set for automated three-dimensional feature extraction?

Deep learning has emerged as a robust tool for automating feature extraction from three-dimensional images, offering an efficient alternative to labour-intensive and potentially biased manual image segmentation methods. However, there has been limited exploration into the optimal training set sizes, including assessing whether artficial expansion by data augmentation can achieve consistent results in less time and how consistent these benefits are across different types of traits. In this study, we manually segmented 50 planktonic foraminifera specimens from the genus Menardella to determine the minimum number of training images required to produce accurate volumetric and shape data from internal and external structures. The results reveal unsurprisingly that deep learning models improve with a larger number of training images with eight specimens being required to achieve 95% accuracy. Furthermore, data augmentation can enhance network accuracy by up to 8.0%. Notably, predicting both volumetric and shape measurements for the internal structure poses a greater challenge compared with the external structure, owing to low contrast differences between different materials and increased geometric complexity. These results provide novel insight into optimal training set sizes for precise image segmentation of diverse traits and highlight the potential of data augmentation for enhancing multivariate feature extraction from three-dimensional images.

The "elongate chelicera problem": A virtual approach in an extinct pterygotid sea scorpion from a 3D kinematic point of view

Chelicerae, distinctive feeding appendages in chelicerates, such as spiders, scorpions, or horseshoe crabs, can be classified based on their orientation relative to the body axis simplified as either orthognathous (parallel) or labidognathous (inclined), exhibiting considerable diversity across various taxa. Among extinct chelicerates, sea scorpions belonging to the Pterygotidae represent the only chelicerates possessing markedly elongated chelicerae relative to body length. Despite various hypotheses regarding the potential ecological functions and feeding movements of these structures, no comprehensive 3D kinematic investigation has been conducted yet to test these ideas. In this study, we generated a comprehensive 3D model of the pterygotid Acutiramus, making the elongated right chelicera movable by equipping it with virtual joint axes for conducting Range of Motion analyses. Due to the absence in the fossil record of a clear indication of the chelicerae orientation and their potential lateral or ventral movements (vertical or horizontal insertion of joint axis 1), we explored the Range of Motion analyses under four distinct kinematic settings with two orientation modes (euthygnathous, klinogathous) analogous to the terminology of the terrestrial relatives. The most plausible kinematic setting involved euthygnathous chelicerae being folded ventrally over a horizontal joint axis. This configuration positioned the chelicera closest to the oral opening. Concerning the maximum excursion angle, our analysis revealed that the chela could open up to 70°, while it could be retracted against the basal element to a maximum of 145°. The maximum excursion in the proximal joint varied between 55° and 120° based on the insertion and orientation. Our findings underscore the utility of applying 3D kinematics to fossilized arthropods for addressing inquiries on functional ecology such as prey capture and handling, enabling insights into their possible behavioral patterns. Pterygotidae likely captured and processed their prey using the chelicerae, subsequently transporting it to the oral opening with the assistance of other prosomal appendages.

Mechanical and elemental characterization of ant mandibles: consequences for bite mechanics

Mandible morphology has an essential role in biting performance, but the mandible cuticle can have regional differences in its mechanical properties. The effects of such a heterogeneous distribution of cuticle material properties in the mandible responses to biting loading are still poorly explored in chewing insects. Here, we tested the mechanical properties of mandibles of the ant species Formica cunicularia by nanoindentation and investigated the effects of the cuticular variation in Young's modulus (E) under bite loading with finite-element analysis (FEA). The masticatory margin of the mandible, which interacts with the food, was the hardest and stiffest region. To unravel the origins of the mechanical property gradients, we characterized the elemental composition by energy-dispersive X-ray spectroscopy. The masticatory margin possessed high proportions of Cu and Zn. When incorporated into the FEA, variation in E effectively changed mandible stress patterns, leading to a relatively higher concentration of stresses in the stiffer mandibular regions and leaving the softer mandible blade with relatively lower stress. Our results demonstrated the relevance of cuticle E heterogeneity in mandibles under bite loading, suggesting that the accumulation of transition metals such as Cu and Zn has a relevant correlation with the mechanical characteristics in F. cunicularia mandibles.

Three-dimensional kinematics of leaf-cutter ant mandibles: not all dicondylic joints are simple hinges

Insects use their mandibles for a variety of tasks, including food processing, material transport, nest building, brood care, and fighting. Despite this functional diversity, mandible motion is typically thought to be constrained to rotation about a single fixed axis. Here, we conduct a direct quantitative test of this 'hinge joint hypothesis' in a species that uses its mandibles for a wide range of tasks: Atta vollenweideri leaf-cutter ants. Mandible movements from live restrained ants were reconstructed in three dimensions using a multi-camera rig. Rigid body kinematic analyses revealed strong evidence that mandible movement occupies a kinematic space that requires more than one rotational degree of freedom: at large opening angles, mandible motion is dominated by yaw. But at small opening angles, mandibles both yaw and pitch. The combination of yaw and pitch allows mandibles to 'criss-cross': either mandible can be on top when mandibles are closed. We observed criss-crossing in freely cutting ants, suggesting that it is functionally important. Combined with recent reports on the diversity of joint articulations in other insects, our results show that insect mandible kinematics are more diverse than traditionally assumed, and thus worthy of further detailed investigation. This article is part of the theme issue 'Food processing and nutritional assimilation in animals'.

Terebra steering in chalcidoid wasps

Various chalcidoid wasps can actively steer their terebra (= ovipositor shaft) in diverse directions, despite the lack of terebral intrinsic musculature. To investigate the mechanisms of these bending and rotational movements, we combined microscopical and microtomographical techniques, together with videography, to analyse the musculoskeletal ovipositor system of the ectoparasitoid pteromalid wasp Lariophagus distinguendus (Förster, 1841) and the employment of its terebra during oviposition. The ovipositor consists of three pairs of valvulae, two pairs of valvifers and the female T9 (9th abdominal tergum). The paired 1st and the 2nd valvulae are interlocked via the olistheter system, which allows the three parts to slide longitudinally relative to each other, and form the terebra. The various ovipositor movements are actuated by a set of nine paired muscles, three of which (i.e. 1st valvifer-genital membrane muscle, ventral 2nd valvifer-venom gland reservoir muscle, T9-genital membrane muscle) are described here for the first time in chalcidoids. The anterior and posterior 2nd valvifer-2nd valvula muscles are adapted in function. (1) In the active probing position, they enable the wasps to pull the base of each of the longitudinally split and asymmetrically overlapping halves of the 2nd valvula that are fused at the apex dorsally, thus enabling lateral bending of the terebra. Concurrently, the 1st valvulae can be pro- and retracted regardless of this bending. (2) These muscles can also rotate the 2nd valvula and therefore the whole terebra at the basal articulation, allowing bending in various directions. The position of the terebra is anchored at the puncture site in hard substrates (in which drilling is extremely energy- and time-consuming). A freely steerable terebra increases the chance of contacting a potential host within a concealed cavity. The evolution of the ability actively to steer the terebra can be considered a key innovation that has putatively contributed to the acquisition of new hosts to a parasitoid's host range. Such shifts in host exploitation, each followed by rapid radiations, have probably aided the evolutionary success of Chalcidoidea (with more than 500,000 species estimated).

The morphological diversity of Mymaridae (Hymenoptera): an atlas of scanning electron micrographs. Part 1. General overview and structure of the head

This is the first in a series of studies that aim to provide a comprehensive overview of the morphological diversity of Mymaridae (Hymenoptera), a monophyletic family of small parasitic wasps that are postulated as the sister group of other Chalcidoidea. The external cranial morphology of 65-75 genera and subgenera of Mymaridae (fairyflies) is described and illustrated with almost 430 scanning electron micrographs, including 73 micrographs of the anterior, 68 of the posterior, 75 of the dorsal, 75 of the lateral, and 67 of the ventral views of the head, plus 71 micrographs of the ventral view of the mouthparts. Twenty-one annotated figures illustrate the terms used for morphological structures. Two appendices list the 64 morphological terms and 5 measurements that are defined and illustrated, and the 116 currently recognized valid genera and subgenera of Mymaridae, including collection localities for those that are illustrated. Discussion of head morphology characteristic of Mymaridae is preceded by an overview that includes discussion of best practices for taxonomic descriptions and why these and accurate identifications require well preserved and imaged specimens. Aspects of intraspecific variation, colour, secondary sexual dimorphism, setation (chaetotaxy), surface sculpture and morphometrics are also treated as all of these are often important for describing and distinguishing species. Many of the features illustrated have not previously been used in Mymaridae systematics but may prove to be useful for helping to identify and describe genera and species.

A biomechanical model for the relation between bite force and mandibular opening angle in arthropods

Bite forces play a key role in animal ecology: they affect mating behaviour, fighting success, and the ability to feed. Although feeding habits of arthropods have a significant ecological and economical impact, we lack fundamental knowledge on how the morphology and physiology of their bite apparatus controls bite performance, and its variation with mandible gape. To address this gap, we derived a biomechanical model that characterizes the relationship between bite force and mandibular opening angle from first principles. We validate this model by comparing its geometric predictions with morphological measurements on the muscoloskeletal bite apparatus of Atta cephalotes leaf-cutter ants, using computed tomography (CT) scans obtained at different mandible opening angles. We then demonstrate its deductive and inductive utility with three examplary use cases: Firstly, we extract the physiological properties of the leaf-cutter ant mandible closer muscle from in vivo bite force measurements. Secondly, we show that leaf-cutter ants are specialized to generate extraordinarily large bite forces, equivalent to about 2600 times their body weight. Thirdly, we discuss the relative importance of morphology and physiology in determining the magnitude and variation of bite force. We hope that a more detailed quantitative understanding of the link between morphology, physiology, and bite performance will facilitate future comparative studies on the insect bite apparatus, and help to advance our knowledge of the behaviour, ecology and evolution of arthropods.