Herpes simplex virus type 1 capsid protein, VP21, originates within the UL26 open reading frame

Comprehensive analysis of liquid-liquid phase separation propensities of HSV-1 proteins and their interaction with host factors

In recent years, it has been shown that the liquid-liquid phase separation (LLPS) of virus proteins plays a crucial role in their life cycle. It promotes the formation of viral replication organelles, concentrating viral components for efficient replication and facilitates the assembly of viral particles. LLPS has emerged as a crucial process in the replication and assembly of herpes simplex virus-1 (HSV-1). Recent studies have identified several HSV-1 proteins involved in LLPS, including the myristylated tegument protein UL11 and infected cell protein 4; however, a complete proteome-level understanding of the LLPS-prone HSV-1 proteins is not available. We provide a comprehensive analysis of the HSV-1 proteome and explore the potential of its proteins to undergo LLPS. By integrating sequence analysis, prediction algorithms and an array of tools and servers, we identified 10 HSV-1 proteins that exhibit high LLPS potential. By analysing the amino acid sequences of the LLPS-prone proteins, we identified specific sequence motifs and enriched amino acid residues commonly found in LLPS-prone regions. Our findings reveal a diverse range of LLPS-prone proteins within the HSV-1, which are involved in critical viral processes such as replication, transcriptional regulation and assembly of viral particles. This suggests that LLPS might play a crucial role in facilitating the formation of specialized viral replication compartments and the assembly of HSV-1 virion. The identification of LLPS-prone proteins in HSV-1 opens up new avenues for understanding the molecular mechanisms underlying viral pathogenesis. Our work provides valuable insights into the LLPS landscape of HSV-1, highlighting potential targets for further experimental validation and enhancing our understanding of viral replication and pathogenesis.

Herpes Simplex Virus 1 Serine Protease VP24 Blocks the DNA-Sensing Signal Pathway by Abrogating Activation of Interferon Regulatory Factor 3

The interferon (IFN)-mediated antiviral response is a central aspect of host defense; however, viruses have evolved multiple strategies to counteract IFN-mediated responses in order to successfully infect the host. Herpes simplex virus 1 (HSV-1), a typical human-restricted DNA virus, is capable of counteracting host immune responses via several distinct viral proteins, thus establishing a lifelong latent infection. In this study, we demonstrate that the VP24 protein, a serine protease of HSV-1 essential for the formation and maturation of capsids, is a novel antagonist of the beta interferon (IFN-β) pathway. Here, VP24 was shown for the first time to dampen interferon stimulatory DNA (ISD)-triggered IFN-β production and inhibit IFN-β promoter activation induced by cyclic GMP-AMP synthase (cGAS) and stimulator of interferon genes (STING) and by STING, respectively. Further study demonstrated that ectopic expression of VP24 selectively blocked IFN regulatory factor 3 (IRF3) but not NF-κB promoter activation. In addition, VP24 was demonstrated to downregulate ISD-induced phosphorylation and dimerization of IRF3 during HSV-1 infection with a VP24 stable knockdown human foreskin fibroblast cell line. The underlying molecular mechanism is that VP24 abrogates the interaction between TANK-binding kinase 1 (TBK1) and IRF3, hence impairing IRF3 activation. These results illustrate that VP24 is able to block the production of IFN-β by inhibiting IRF3 activation, which may represent a critical adaptation to enable viral effective replication within the host.

IMPORTANCE

This study demonstrated that HSV-1 protein VP24 could inhibit IFN-β production and promoter activation triggered by ISD, cGAS and STING and by STING, respectively. VP24 selectively blocked IRF3 promoter activation and ISD-induced phosphorylation and dimerization of IRF3 without affecting the NF-κB promoter activation during viral infection. VP24 also inhibited IRF3 activation by impeding the interaction between TBK1 and IRF3 during viral infection. This study provides new insights into the immune evasion mediated by HSV-1 and identifies VP24 as a crucial effector for HSV-1 to evade the host DNA-sensing signal pathway.

Expression of the HSV-1 capsid protein VP19C in Escherichia coli: a single amino acid change overcomes an expression block of the full-length polypeptide

The herpesvirus triplex is a key structural feature of the capsids of these viruses. It is composed of a hetero-trimer of one molecule of VP19C and two molecules of VP23. It acts to stabilize capsid shells by connecting the capsomeric subunits together. Although it has been possible to over-express in Escherichia coli and purify one component of the triplex, VP23; this has not been the case with VP19C. Because an N-terminal polypeptide of VP19C could be expressed and purified using a GST affinity tag, a directed mutagenic approach was used to determine the region of VP19C that caused the block in expression of the full-length protein. The region was mapped to reside between VP19C amino acids 145 and 150 using truncation gene fusions and subsequently a single amino acid, R146 was identified which when changed to alanine, allowed stable expression and accumulation of VP19C. This change does not affect the biological function of VP19C. Finally using this altered VP19C, co-expression of the triplex proteins in the same cell has been achieved making it now possible to purify this complex for biophysical and structural studies.

Effects of major capsid proteins, capsid assembly, and DNA cleavage/packaging on the pUL17/pUL25 complex of herpes simplex virus 1

The U(L)17 and U(L)25 proteins (pU(L)17 and pU(L)25, respectively) of herpes simplex virus 1 are located at the external surface of capsids and are essential for DNA packaging and DNA retention in the capsid, respectively. The current studies were undertaken to determine whether DNA packaging or capsid assembly affected the pU(L)17/pU(L)25 interaction. We found that pU(L)17 and pU(L)25 coimmunoprecipitated from cells infected with wild-type virus, whereas the major capsid protein VP5 (encoded by the U(L)19 gene) did not coimmunoprecipitate with these proteins under stringent conditions. In addition, pU(L)17 (i) coimmunoprecipitated with pU(L)25 in the absence of other viral proteins, (ii) coimmunoprecipitated with pU(L)25 from lysates of infected cells in the presence or absence of VP5, (iii) did not coimmunoprecipitate efficiently with pU(L)25 in the absence of the triplex protein VP23 (encoded by the U(L)18 gene), (iv) required pU(L)25 for proper solubilization and localization within the viral replication compartment, (v) was essential for the sole nuclear localization of pU(L)25, and (vi) required capsid proteins VP5 and VP23 for nuclear localization and normal levels of immunoreactivity in an indirect immunofluorescence assay. Proper localization of pU(L)25 in infected cell nuclei required pU(L)17, pU(L)32, and the major capsid proteins VP5 and VP23, but not the DNA packaging protein pU(L)15. The data suggest that VP23 or triplexes augment the pU(L)17/pU(L)25 interaction and that VP23 and VP5 induce conformational changes in pU(L)17 and pU(L)25, exposing epitopes that are otherwise partially masked in infected cells. These conformational changes can occur in the absence of DNA packaging. The data indicate that the pU(L)17/pU(L)25 complex requires multiple viral proteins and functions for proper localization and biochemical behavior in the infected cell.

Tryptophan residues in the portal protein of herpes simplex virus 1 critical to the interaction with scaffold proteins and incorporation of the portal into capsids

Incorporation of the herpes simplex virus 1 (HSV-1) portal vertex into the capsid requires interaction with a 12-amino-acid hydrophobic domain within capsid scaffold proteins. The goal of this work was to identify domains and residues in the UL6-encoded portal protein pUL6 critical to the interaction with scaffold proteins. We show that whereas the wild-type portal and scaffold proteins readily coimmunoprecipitated with one another in the absence of other viral proteins, truncation beyond the first 18 or last 36 amino acids of the portal protein precluded this coimmunoprecipitation. The coimmunoprecipitation was also precluded by mutation of conserved tryptophan (W) residues to alanine (A) at positions 27, 90, 127, 163, 241, 262, 532, and 596 of UL6. All of these W-to-A mutations precluded the rescue of a viral deletion mutant lacking UL6, except W163A, which supported replication poorly, and W596A, which fully rescued replication. A recombinant virus bearing the W596A mutation replicated and packaged DNA normally, and scaffold proteins readily coimmunoprecipitated with portal protein from lysates of infected cells. Thus, viral functions compensated for the W596A mutation's detrimental effects on the portal-scaffold interaction seen during transient expression of portal and scaffold proteins. In contrast, the W27A mutation precluded portal-scaffold interactions in infected cell lysates, reduced the solubility of pUL6, decreased incorporation of the portal into capsids, and abrogated viral-DNA cleavage and packaging.

Proline and tyrosine residues in scaffold proteins of herpes simplex virus 1 critical to the interaction with portal protein and its incorporation into capsids

Previous results showed that amino acids 449 to 457 of pU(L)26, a component of the scaffold of herpes simplex virus 1 capsids, were critical for interaction with the portal protein encoded by U(L)6 and for incorporation of the portal into capsids. To identify residues in this scaffold domain critical for the interaction with pU(L)6, the two proteins were coexpressed in the absence of other viral proteins and subjected to immunoprecipitation with scaffold-specific antibody. Coimmunoprecipitation of pU(L)6 was precluded by pU(L)26 mutations Y451A, P452A, and E454A but not by P449A, R456A, or Y450A. In infected cells, Y451A and P452A diminished solubilization of pU(L)6, reduced incorporation of the portal into the capsid, and precluded viral replication and DNA packaging. In contrast, E454A did not affect these parameters despite the fact that E454 is invariant in a number of different alphaherpesvirus scaffold proteins. These data suggest that the interaction between the scaffold E454A mutant and portal protein is rescued by other viral functions. Finally, we show that amino acids 448 to 459 of pU(L)26 are sufficient to interact with pU(L)6 in a glutathione S-transferase pulldown assay in the absence of other viral proteins and that this interaction is inhibited with excess peptide containing pU(L)26 amino acids 443 to 462. Together, these observations suggest that a direct interaction between this scaffold domain and portal protein mediates incorporation of the portal into the capsid.

Live visualization of herpes simplex virus type 1 compartment dynamics

We have constructed a recombinant herpes simplex virus type 1 (HSV-1) that simultaneously encodes selected structural proteins from all three virion compartments-capsid, tegument, and envelope-fused with autofluorescent proteins. This triple-fluorescent recombinant, rHSV-RYC, was replication competent, albeit with delayed kinetics, incorporated the fusion proteins into all three virion compartments, and was comparable to wild-type HSV-1 at the ultrastructural level. The VP26 capsid fusion protein (monomeric red fluorescent protein [mRFP]-VP26) was first observed throughout the nucleus and later accumulated in viral replication compartments. In the course of infection, mRFP-VP26 formed small foci in the periphery of the replication compartments that expanded and coalesced over time into much larger foci. The envelope glycoprotein H (gH) fusion protein (enhanced yellow fluorescent protein [EYFP]-gH) was first observed accumulating in a vesicular pattern in the cytoplasm and was then incorporated primarily into the nuclear membrane. The VP16 tegument fusion protein (VP16-enhanced cyan fluorescent protein [ECFP]) was first observed in a diffuse nuclear pattern and then accumulated in viral replication compartments. In addition, it also formed small foci in the periphery of the replication compartments which, however, did not colocalize with the small mRFP-VP26 foci. Later, VP16-ECFP was redistributed out of the nucleus into the cytoplasm, where it accumulated in vesicular foci and in perinuclear clusters reminiscent of the Golgi apparatus. Late in infection, mRFP-VP26, EYFP-gH, and VP16-ECFP were found colocalizing in dots at the plasma membrane, possibly representing mature progeny virus. In summary, this study provides new insights into the dynamics of compartmentalization and interaction among capsid, tegument, and envelope proteins. Similar strategies can also be applied to assess other dynamic events in the virus life cycle, such as entry and trafficking.

Herpes simplex virus DNA cleavage and packaging proteins associate with the procapsid prior to its maturation

Packaging of DNA into preformed capsids is a fundamental early event in the assembly of herpes simplex virus type 1 (HSV-1) virions. Replicated viral DNA genomes, in the form of complex branched concatemers, and unstable spherical precursor capsids termed procapsids are thought to be the substrates for the DNA-packaging reaction. In addition, seven viral proteins are required for packaging, although their individual functions are undefined. By analogy to well-characterized bacteriophage systems, the association of these proteins with various forms of capsids, including procapsids, might be expected to clarify their roles in the packaging process. While the HSV-1 UL6, UL15, UL25, and UL28 packaging proteins are known to associate with different forms of stable capsids, their association with procapsids has not been tested. Therefore, we isolated HSV-1 procapsids from infected cells and used Western blotting to identify the packaging proteins present. Procapsids contained UL15 and UL28 proteins; the levels of both proteins are diminished in more mature DNA-containing C-capsids. In contrast, UL6 protein levels were approximately the same in procapsids, B-capsids, and C-capsids. The amount of UL25 protein was reduced in procapsids relative to that in more mature B-capsids. Moreover, C-capsids contained the highest level of UL25 protein, 15-fold higher than that in procapsids. Our results support current hypotheses on HSV DNA packaging: (i) transient association of UL15 and UL28 proteins with maturing capsids is consistent with their proposed involvement in site-specific cleavage of the viral DNA (terminase activity); (ii) the UL6 protein may be an integral component of the capsid shell; and (iii) the UL25 protein may associate with capsids after scaffold loss and DNA packaging, sealing the DNA within capsids.

Evidence for controlled incorporation of herpes simplex virus type 1 UL26 protease into capsids

Herpes simplex virus type 1 (HSV-1) capsids are initially assembled with an internal protein scaffold. The scaffold proteins, encoded by overlapping in-frame UL26 and UL26.5 transcripts, are essential for formation and efficient maturation of capsids. UL26 encodes an N-terminal protease domain, and its C-terminal oligomerization and capsid protein-binding domains are identical to those of UL26.5. The UL26 protease cleaves itself, releasing minor scaffold proteins VP24 and VP21, and the more abundant UL26.5 protein, releasing the major scaffold protein VP22a. Unlike VP21 and VP22a, which are removed from capsids upon DNA packaging, we demonstrate that VP24 (containing the protease domain) is quantitatively retained. To investigate factors controlling UL26 capsid incorporation and retention, we used a mutant virus that fails to express UL26.5 (DeltaICP35 virus). Purified DeltaICP35 B capsids showed altered sucrose gradient sedimentation and lacked the dense scaffold core seen in micrographs of wild-type B capsids but contained capsid shell proteins in wild-type amounts. Despite C-terminal sequence identity between UL26 and UL26.5, DeltaICP35 capsids lacking UL26.5 products did not contain compensatory high levels of UL26 proteins. Therefore, HSV capsids can be maintained and/or assembled on a minimal scaffold containing only wild-type levels of UL26 proteins. In contrast to UL26.5, increased expression of UL26 did not compensate for the DeltaICP35 growth defect. While indirect, these findings are consistent with the view that UL26 products are restricted from occupying abundant UL26.5 binding sites within the capsid and that this restriction is not controlled by the level of UL26 protein expression. Additionally, DeltaICP35 capsids contained an altered complement of DNA cleavage and packaging proteins, suggesting a previously unrecognized role for the scaffold in this process.

ATP-Dependent localization of the herpes simplex virus capsid protein VP26 to sites of procapsid maturation

The herpes simplex virus type 1 (HSV-1) capsid shell is composed of four major polypeptides, VP5, VP19c, VP23, and VP26. VP26, a 12-kDa polypeptide, is associated with the tips of the capsid hexons formed by VP5. Mature capsids form upon angularization of the shell of short-lived, fragile spherical precursors termed procapsids. The cold sensitivity and short-lived nature of the procapsid have made its isolation and biochemical analysis difficult, and it remains unclear whether procapsids contain bound VP26 or whether VP26 is recruited following shell angularization. By indirect immunocytochemical analysis of virally expressed VP26 and by direct visualization of a transiently expressed VP26-green fluorescent protein fusion, we show that VP26 fails to specifically localize to intranuclear procapsids accumulated following incubation of the temperature-sensitive HSV mutant tsProt.A under nonpermissive conditions. However, following a downshift to the permissive temperature, which allows procapsid maturation to proceed, VP26 was seen to concentrate at intranuclear sites which also contained epitopes specific to mature, angularized capsids. Like the formation of these epitopes, the association of VP26 with maturing capsids was blocked in a reversible fashion by the depletion of intracellular ATP. We conclude that unlike the other major capsid shell proteins, VP26 is recruited in an ATP-dependent fashion after procapsid maturation begins.

Second site mutations in the N-terminus of the major capsid protein (VP5) overcome a block at the maturation cleavage site of the capsid scaffold proteins of herpes simplex virus type 1

VP5, the major capsid protein of herpes simplex virus type 1 (HSV-1), interacts with the C-terminal residues of the scaffold molecules encoded by the overlapping UL26 and UL26.5 open reading frames. Scaffold molecules are cleaved by a UL26 encoded protease (VP24) as part of the normal capsid assembly process. In this study, residues of VP5 have been identified that alter its interaction with the C-terminal residues of the scaffold proteins. A previously isolated virus (KUL26-610/611) was used that encoded a lethal mutation in the UL26 and UL26.5 open reading frames and required a transformed cell line that expresses these proteins for virus growth. The scaffold maturation cleavage site between amino acids 610 and 611 was blocked by changing Ala-Ser to Glu-Phe, which generated a new EcoRI restriction site. Revertant viruses, that formed small plaques on nontransformed cells, were detected at a frequency of 1:3800. Nine revertants were isolated, and all of them retained the EcoRI site and therefore were due to mutations at a second site. The second site mutations were extragenic. Using marker-transfer techniques, the mutation in one of the revertants was mapped to the 5' region of the gene encoding VP5. DNA sequence analysis was performed for the N-terminal 571 codons encoding VP5 for all of the revertant viruses. Six of the nine revertants showed a single base pair change that caused an amino acid substitution between residues 30 and 78 of VP5. Three of these were identical and changed Ala to Val at residue 78. The data provide a partial map of residues of VP5 that alter its interaction with scaffold proteins blocked at their normal cleavage site. The yeast two-hybrid system was used as a measure of the interaction between mutant VP5 and scaffold molecules and varied from 11% to nearly 100%, relative to wild-type VP5. One revertant gave no detectable interaction by this assay. The amount of UL26 encoded protease (VP24) in B capsids for KUL26-610/611 and for revertants was 7% and 25%, respectively, relative to the amount in capsids for wild-type virus. The lack of retention of the viral protease in the mutant virus and a fourfold increase for the revertants suggest an additional essential function for VP24 in capsid maturation, and a role in DNA packaging is indicated.

ATP depletion blocks herpes simplex virus DNA packaging and capsid maturation

During herpes simplex virus (HSV) assembly, immature procapsids must expel their internal scaffold proteins, transform their outer shell to form mature polyhedrons, and become packaged with the viral double-stranded (ds) DNA genome. A large number of virally encoded proteins are required for successful completion of these events, but their molecular roles are poorly understood. By analogy with the dsDNA bacteriophage we reasoned that HSV DNA packaging might be an ATP-requiring process and tested this hypothesis by adding an ATP depletion cocktail to cells accumulating unpackaged procapsids due to the presence of a temperature-sensitive lesion in the HSV maturational protease UL26. Following return to permissive temperature, HSV capsids were found to be unable to package DNA, suggesting that this process is indeed ATP dependent. Surprisingly, however, the display of epitopes indicative of capsid maturation was also inhibited. We conclude that either formation of these epitopes directly requires ATP or capsid maturation is normally arrested by a proofreading mechanism until DNA packaging has been successfully completed.

Genetic analysis of the UL 15 gene locus for the putative terminase of herpes simplex virus type 1

The herpes simplex virus (HSV-1) UL15 gene encodes one of the six viral gene products required for viral DNA cleavage and packaging. UL15 is a spliced gene and encodes two separately translated proteins, UL15 and UL15.5. Sequence analysis reveals that UL15 shares homology with gp 17, the large catalytic subunit of the bacteriophage T4 terminase, a protein which cleaves the polymeric T4 DNA into monomers. Both proteins contain a putative ATP binding motif known as the Walker A and B boxes. In this report, immunofluorescence was used to show that UL15 localizes to the nucleus in the absence of any other viral proteins; this indicates that UL15 contains its own nuclear localization signal. In addition, we found that UL15 colocalizes with replication compartments at early times (6 h postinfection). Since, at this time, preformed capsids as well as other cleavage and packaging proteins are also recruited to replication compartments, it seems likely that cleavage and packaging occurs in the same compartments in which DNA synthesis occurs. Also in this report, we have investigated UL15.5, the N-terminally truncated gene product of the UL15 open reading frame (ORF). The start codon has been mapped to Met443 within the UL15 ORF. Furthermore, we have shown that plasmids containing a UL15.5 knockout mutation still complement the growth of UL15 insertion mutant viruses, indicating that UL15.5 is not required for viral growth in cell culture. Last, we constructed a UL15 mutant, UL15C(G263A), in which the invariant Gly263 in the Walker box A of the ATP binding motif (GKT) was substituted with an alanine. We show that the mutant gene fails to support the growth of UL15 insertion mutant viruses, indicating that the putative ATP binding motif of UL15 is indispensable for its function.

Self-association of herpes simplex virus type 1 ICP35 is via coiled-coil interactions and promotes stable interaction with the major capsid protein

The ordered copolymerization of viral proteins to form the herpes simplex virus (HSV) capsid occurs within the nucleus of the infected cell and is a complex process involving the products of at least six viral genes. In common with capsid assembly in double-stranded DNA bacteriophages, HSV capsid assembly proceeds via the assembly of an outer capsid shell around an interior scaffold. This capsid intermediate matures through loss of the scaffold and packaging of the viral genomic DNA. The interior of the HSV capsid intermediate contains the viral protease and assembly protein which compose the scaffold. Proteolytic processing of these proteins is essential for and accompanies capsid maturation. The assembly protein (ICP35) is the primary component of the scaffold, and previous studies have demonstrated it to be capable of intermolecular association with itself and with the major capsid protein, VP5. We have defined structural elements within ICP35 which are responsible for intermolecular self-association and for interaction with VP5. Yeast (Saccharomyces cerevisiae) two-hybrid assays and far-Western studies with purified recombinant ICP35 mapped a core self-association domain between Ser165 and His219. Site-directed mutations in this domain implicate a putative coiled coil in ICP35 self-association. This coiled-coil motif is highly conserved within the assembly proteins of other alpha herpesviruses. In the two-hybrid assay the core self-association domain was sufficient to mediate stable self-association only in the presence of additional structural elements in either N- or C-terminal flanking regions. These regions also contain conserved sequences which exhibit a high propensity for alpha helicity and may contribute to self-association by forming additional short coiled coils. Our data supports a model in which ICP35 molecules have an extended conformation and associate in parallel orientation through homomeric coiled-coil interactions. In additional two-hybrid experiments we evaluated ICP35 mutants for association with VP5. We discovered that in addition to the C-terminal 25 amino acids of ICP35, previously shown to be required for VP5 binding, an additional upstream region was required. This region is between Ser165 and His234 and contains the core self-association domain. Site-directed mutations and construction of chimeric molecules in which the self-association domain of ICP35 was replaced by the GCN4 leucine zipper indicated that this region contributes to VP5 binding through mediating self-association of ICP35 and not through direct binding interactions. Our results suggest that self-association of ICP35 strongly promotes stable association with VP5 in vivo and are consistent with capsid formation proceeding via formation of stable subassemblies of ICP35 and VP5 which subsequently assemble into capsid intermediates in the nucleus.

Study of herpes simplex virus maturation during a synchronous wave of assembly

Production of an infectious herpes simplex virus (HSV) particle requires sequential progression of maturing virions through a series of complex assembly events. Capsids must be constructed in the nucleus, packaged with the viral genome, and transported to the nuclear periphery. They then bud into the nuclear membrane to acquire an envelope, traffic through the cytoplasm, and are released from the cell. Most of these phenomena are very poorly defined, and no suitable model system has previously been available to facilitate molecular analyses of genomic DNA packaging, capsid envelopment, and intracellular virion trafficking. We report the development of such an assay system for HSV type 1 (HSV-1). Using a reversible temperature-sensitive mutation in capsid assembly, we have developed conditions in which an accumulated population of immature capsids can be rapidly, efficiently, and synchronously chased to maturity. By assaying synchronized scaffold cleavage, DNA packaging, and acquisition of infectivity, we have demonstrated the kinetics with which these events occur. Kinetic and morphological features of intranuclear and extranuclear virion trafficking have similarly been examined by indirect immunofluorescence microscopy and electron microscopy. This system should prove a generally useful tool for the molecular dissection of many late events in HSV-1 biogenesis.

Assembly of herpes simplex virus capsids using the human cytomegalovirus scaffold protein: critical role of the C terminus

An essential step in assembly of herpes simplex virus (HSV) type 1 capsids involves interaction of the major capsid protein (VP5) with the C terminus of the scaffolding protein (encoded by the UL26.5 gene). The final 12 residues of the HSV scaffolding protein contains an A-X-X-F-V/A-X-Q-M-M-X-X-R motif which is conserved between scaffolding proteins found in other alphaherpesviruses but not in members of the beta- or gamma-herpesviruses. Previous studies have shown that the bovine herpesvirus 1 (alphaherpesvirus) UL26.5 homolog will functionally substitute for the HSV UL26.5 gene (E. J. Haanes et al., J. Virol. 69:7375-7379, 1995). The homolog of the UL26.5 gene in the human cytomegalovirus (HCMV) genome is the UL80.5 gene. In these studies, we tested whether the HCMV UL80.5 gene would substitute for the HSV UL26.5 gene in a baculovirus capsid assembly system that we have previously described (D. R. Thomsen et al., J. Virol. 68:2442-2457, 1994). The results demonstrate that (i) no intact capsids were assembled when the full-length or a truncated (missing the C-terminal 65 amino acids) UL80.5 protein was tested; (ii) when the C-terminal 65 amino acids of the UL80.5 protein were replaced with the C-terminal 25 amino acids of the UL26.5 protein, intact capsids were made and direct interaction of the UL80.5 protein with VP5 was detected; (iii) assembly of intact capsids was demonstrated when the sequence of the last 12 amino acids of the UL80.5 protein was changed from RRIFVA ALNKLE to RRIFVAAMMKLE; (iv) self-interaction of the scaffold proteins is mediated by sequences N terminal to the maturation cleavage site; and (v) the UL26.5 and UL80.5 proteins will not coassemble into scaffold structures. The results suggest that the UL26.5 and UL80.5 proteins form a scaffold by self-interaction via sequences in the N termini of the proteins and emphasize the importance of the C terminus for interaction of scaffold with the proteins that form the capsid shell.

Protease-deficient herpes simplex virus protects mice from lethal herpesvirus infection

Null mutants and attenuated mutants of herpes simplex virus (HSV) have been shown to induce immunity against challenge from wild-type virus. Null viruses with a defect in late gene products would be expected to express more viral genes than viruses with defects in essential early gene products and thus induce a better immune response. Herpesviruses encode a late gene product (serine protease) that is autocatalytic and cleaves the capsid assembly protein during viral replication. To determine whether a virus with a mutation in this gene could induce immunity, we constructed a recombinant virus containing the gusA reporter gene in the protease domain of the HSV type 1 UL26 open reading frame (ORF). Consistent with previous results (M. Gao, L. Matusick-Kumar, W. Hurlburt, S. F. DiTusa, W. W. Newcomb, J. C. Brown, P. J. McCann, I. Deckman, and R. J. Colonno, J. Virol. 68:3702-3712, 1994), recombinant virus could be isolated only from helper cell lines expressing the product of the UL26 ORF. Mice inoculated with the recombinant virus were unaffected by doses of virus that were lethal to mice infected with wild-type virus. Mice which were previously inoculated with the recombinant virus were also protected by a subsequent challenge with wild-type virus in a dose-dependent manner. These results indicate that recombinant viruses lacking the protease gene are avirulent but render protection from subsequent challenge.

Na, an autoproteolytic product of the herpes simplex virus type 1 protease, can functionally substitute for the assembly protein ICP35

The herpes simplex virus type 1 (HSV-1) protease and its substrate, the assembly protein ICP35, are involved in virion maturation. Both proteins are encoded by a single open reading frame but are translated independently from 3'-coterminal mRNAs of different sizes and are in frame. The herpesvirus shell assembles around an internal scaffold which is subsequently lost during packaging of the viral genome. The scaffold is composed of ICP35, which is the major component, and autoproteolytically processed forms of the viral protease containing sequences common to ICP35 (Nb). In the baculovirus system, HSV-1 intact capsids can be formed in the presence of the protease or ICP35, indicating that the protease may substitute for ICP35 (Thomsen et al., J. Virol. 68:2442-2457, 1994). This is further supported by the fact that ICP35, in contrast to the protease, is not absolutely essential for viral growth. The processed intermediate of the protease analogous to ICP35 is the 388-amino-acid (aa) protein, Na, which is an N-terminal 59-aa extension of the 329-aa ICP35. To directly examine whether Na can functionally substitute for ICP35 during viral replication, we first constructed a mutant virus, Na delta35, in which 35 aa from the N terminus of Na were deleted. Phenotypic analysis of the mutant showed that this deletion had no effect on protease function. The function of Na was further examined by construction of a plasmid expressing Na alone and testing its ability to complement the growth of the mutant Prb virus in the absence of ICP35. Our results demonstrate that Na can functionally substitute for ICP35 during viral replication.

Human cytomegalovirus capsid assembly protein precursor (pUL80.5) interacts with itself and with the major capsid protein (pUL86) through two different domains

We have used the yeast GAL4 two-hybrid system to examine interactions between the human cytomegalovirus (HCMV) major capsid protein (MCP, encoded by UL86) and the precursor assembly protein (pAP, encoded by UL80.5 and cleaved at its carboxyl end to yield AP) and found that (i) the pAP interacts with the MCP through residues located within the carboxy-terminal 21 amino acids of the pAP, called the carboxyl conserved domain (CCD); (ii) the pAP interacts with itself through a separate region, called the amino conserved domain (ACD), located between amino acids His34 and Arg52 near the amino end of the molecule; (iii) the simian CMV (SCMV) pAP and AP can interact with or replace their HCMV counterparts in these interactions, whereas the herpes simplex virus pAP and AP homologs cannot; and (iv) the HCMV and SCMV maturational proteinase precursors (ACpra, encoded by UL80a and APNG1, respectively) can interact with the pAP and MCP. The ACD and CCD amino acid sequences are highly conserved among members of the betaherpesvirus group and appear to have counterparts in the alpha- and gammaherpesvirus pAP homologs. Deleting the ACD from the HCMV pAP, or substituting Ala for a conserved Leu in the ACD, eliminated detectable pAP self-interaction and also substantially reduced MCP binding in the two-hybrid assay. This finding indicates that the pAP self-interaction influences the pAP-MCP interaction. Immunofluorescence studies corroborated the pAP-MCP interaction detected in the GAL4 two-hybrid experiments and showed that nuclear transport of the MCP was mediated by pAP but not AP. We conclude that the pAP interacts with the MCP, that this interaction is mediated by the CCD and is influenced by pAP self-interaction, and that one function of the pAP-MCP interaction may be to provide a controlled mechanism for transporting the MCP into the nucleus.

Two-dimensional gel analysis of [35S]methionine labelled and phosphorylated proteins present in virions and light particles of herpes simplex virus type 1, and detection of potentially new structural proteins

Cells infected with herpes simplex virus (HSV) synthesize both infectious viruses and non-infectious light particles (L-particles). The latter contain the envelope and tegument components of the virions, but lack virus capsid and DNA. Electrophoresis in SDS-polyacrylamide gels (SDS-PAGE) has been used extensively for analysis of structural proteins in virions and L-particles. Two-dimensional (2-D) gel electrophoresis, however has a markedly higher resolution, and in the present work we have used this technique to study both [35S]methionine labelled and phosphorylated structural proteins in virions and L-particles. Proteins were assigned to the tegument or the envelope by the analysis of L-particles. Localization of structural proteins was also determined by stepwise solubilization in the presence of the neutral detergent NP-40 and NaCl, and by isolation of capsids from nuclei of infected cells. Different steps in posttranslational modification can be detected by 2-D gel electrophoresis such that a single polypeptide may appear as several spots. This was most clearly observed for some of the HSV-encoded glycoproteins which were shown to exist in multiple forms in the virion. Some polypeptides apparently not identified previously were either capsid associated, or localized in the tegument or envelope. The degrees of phosphorylation in L-particles and virions are almost identical for some proteins, but markedly different for others. Thus, glycoprotein E of HSV-1 is for the first time shown to be phosphorylated, and most heavily so in virions. The IE VMW)110 protein represents a group of proteins which are more phosphorylated in L-particles than in virions. Attempts are made to correlate the proteins detected by 2-D analysis with those previously separated by SDS-PAGE.

Cytomegalovirus "missing" capsid protein identified as heat-aggregable product of human cytomegalovirus UL46

Capsids of human and simian strains of cytomegalovirus (HCMV and SCMV, respectively) have identified counterparts for all but one of the protein components of herpes simplex virus (HSV) capsids. The open reading frames (ORFs) for the CMV and HSV counterpart proteins are positionally homologous in the two genomes. The HSV capsid protein without a recognized counterpart in CMV is VP19c, a 50-kDa element of the intercapsomeric "triplex." VP19c is encoded by HSV ORF UL38, whose positional homolog in the HCMV genome is UL46. The predicted protein product of HCMV UL4A6, however, has essentially no amino acid sequence similarity to HSV VP19c, is only two-thirds as long, and was not recognized as a component of CMV capsids. To identify and learn more about the protein encoded by HCMV UL46, we have expressed it in insect cells from a recombinant baculovirus and tested for its presence in CMV-infected human cells and virus particles with two UL4A6-specific antipeptide antisera. Results presented here show that this HCMV protein (i) has a size of approximately 30 kDa as expressed in both recombinant baculovirus-infected insect cells and HCMV-infected human cells; (ii) has a homolog in SCMV; (iii) is a capsid component and is present in a 1:2 molar ratio with the minor capsid protein (mCP), encoded by UL85; and (iv) interacts with the mCP, which is also shown to interact with itself as demonstrated by the GAL4 two-hybrid system; and (v) aggregates when heated and does not enter the resolving gel during sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), a characteristic that accounts for it eluding detection until now. We call this protein the mCP-binding protein, and on the basis of the characteristics that it shares with HSV VP19c, we conclude that the HCMV mCP-binding protein is the functional as well as genetic homolog of HSV VP19c.

Virus-specific interaction between the human cytomegalovirus major capsid protein and the C terminus of the assembly protein precursor

We previously identified a minimal 12-amino-acid domain in the C terminus of the herpes simplex virus type 1 (HSV-1) scaffolding protein which is required for interaction with the HSV-1 major capsid protein. An alpha-helical structure which maximizes the hydropathicity of the minimal domain is required for the interaction. To address whether cytomegalovirus (CMV) utilizes the same strategy for capsid assembly, several glutathione S-transferase fusion proteins to the C terminus of the CMV assembly protein precursor were produced and purified from bacterial cells. The study showed that the glutathione S-transferase fusion containing 16 amino acids near the C-terminal end was sufficient to interact with the major capsid protein. Interestingly, no cross-interaction between HSV-1 and CMV could be detected. Mutation analysis revealed that a three-amino-acid region at the N-terminal side of the central Phe residue of the CMV interaction domain played a role in determining the viral specificity of the interaction. When this region was converted so as to correspond to that of HSV-1, the CMV assembly protein domain lost its ability to interact with the CMV major capsid protein but gained full interaction with the HSV-1 major capsid protein. To address whether the minimal interaction domain of the CMV assembly protein forms an alpha-helical structure similar to that in HSV-1, peptide competition experiments were carried out. The results showed that a cyclic peptide derived from the interaction domain with a constrained (alpha-helical structure competed for interaction with the major capsid protein much more efficiently than the unconstrained linear peptide. In contrast, a cyclic peptide containing an Ala substitution for the critical Phe residue did not compete for the interaction at all. The results of this study suggest that (i) CMV may have developed a strategy similar to that of HSV-1 for capsid assembly; (ii) the minimal interaction motif in the CMV assembly protein requires an alpha-helix for efficient interaction with the major capsid protein; and (iii) the Phe residue in the CMV minimal interaction domain is critical for interaction with the major capsid protein.

Assemblons: nuclear structures defined by aggregation of immature capsids and some tegument proteins of herpes simplex virus 1

In cells infected with herpes simplex virus 1 (HSV-1), the viral proteins ICP5 (infected-cell protein 5) and VP19c (the product of UL38) are associated with mature capsids, whereas the same proteins, along with ICP35, are components of immature capsids. Here we report that ICP35, ICP5, and UL38 (VP19c) coalesce at late times postinfection and form antigenically dense structures located at the periphery of nuclei, close to but not abutting nuclear membranes. These structures were formed in cells infected with a virus carrying a temperature-sensitive mutation in the UL15 gene at nonpermissive temperatures. Since at these temperatures viral DNA is made but not packaged, these structures must contain the proteins for immature-capsid assembly and were therefore designated assemblons. These assemblons are located at the periphery of a diffuse structure composed of proteins involved in DNA synthesis. This structure overlaps only minimally with the assemblons. In contrast, tegument proteins were located in asymmetrically distributed structures also partially overlapping with assemblons but frequently located nearer to nuclear membranes. Of particular interest is the finding that the UL15 protein colocalized with the proteins associated with viral DNA synthesis rather than with assemblons, suggesting that the association with DNA may take place during its synthesis and precedes the involvement of this protein in packaging of the viral DNA into capsids. The formation of three different compartments consisting of proteins involved in viral DNA synthesis, the capsid proteins, and tegument proteins suggests that there exists a viral machinery which enables aggregation and coalescence of specific viral protein groups on the basis of their function.

Characterization of a soluble stable human cytomegalovirus protease and inhibition by M-site peptide mimics

The human cytomegalovirus (HCMV) protease is a potential target for antiviral chemotherapeutics; however, autoprocessing at internal sites, particularly at positions 143 and 209, hinders the production of large quantities of stable enzyme for either screening or structural studies. Using peptides encompassing the sequence of the natural M-site substrate (P5-P5', GVVNA/SCRLA), we previously demonstrated that substitution of glycine for valine at the P3 position in the substrate abrogates processing by the recombinant protease in vitro. We now demonstrate that introduction of the V-to-G substitution in the P3 positions of the two major internal processing sites, positions 143 and 209, in the mature HCMV protease renders the enzyme stable to autoprocessing. When expressed in Escherichia coli, the doubly substituted protease was produced almost exclusively as the 30-kDa full-length protein. The full-length V141G, V207G (V-to-G changes at positions 141 and 207) protease was purified as a soluble protein by a simple two-step procedure, ammonium sulfate precipitation followed by DEAE ion-exchange chromatography, resulting in 10 to 15 mg of greater than 95% pure enzyme per liter. The stabilized enzyme was characterized kinetically and was indistinguishable from the wild-type recombinant protease, exhibiting Km and catalytic constant values of 0.578 mM and 13.18/min, respectively, for the maturation site (M-site) peptide substrate, GVVNASCRLARR (underlined residues indicate additions to or substitutions from peptides derived from the wild-type substrate). This enzyme was also used to perform inhibition studies with a series of truncated and/or substituted maturation site peptides. Short nonsubstrate M-site-derived peptides were demonstrated to be competitive inhibitors of cleavage in vitro, and these analyses defined amino acids VVNA, P4 through P1 in the substrate, as the minimal substrate binding and recognition sequence for the HCMV protease.

Separate functional domains of the herpes simplex virus type 1 protease: evidence for cleavage inside capsids

The herpes simplex virus type 1 (HSV-1) protease (Pra) and related proteins are involved in the assembly of viral capsids and virion maturation. Pra is a serine protease, and the active-site residue has been mapped to amino acid (aa) 129 (Ser). This 635-aa protease, encoded by the UL26 gene, is autoproteolytically processed at two sites, the release (R) site between amino acid residues 247 and 248 and the maturation (M) site between residues 610 and 611. When the protease cleaves itself at both sites, it releases Nb, the catalytic domain (N0), and the C-terminal 25 aa. ICP35, a substrate of the HSV-1 protease, is the product of the UL26.5 gene. As it is translated from a Met codon within the UL26 gene, ICP35 cd are identical to the C-terminal 329-aa sequence of the protease and are trans cleaved at an identical C-terminal site to generate ICP35 e,f and a 25-aa peptide. Only fully processed Pra (N0 and Nb) and ICP35 (ICP35 e,f) are present in B capsids, which are believed to be precursors of mature virions. Using an R-site mutant A247S virus, we have recently shown that this mutant protease retains enzymatic activity but fails to support viral growth, suggesting that the release of N0 is required for viral replication. Here we report that another mutant protease, with an amino acid substitution (Ser to Cys) at the active site, can complement the A247S mutant but not a protease deletion mutant. Cell lines expressing the active-site mutant protease were isolated and shown to complement the A247S mutant at the levels of capsid assembly, DNA packaging, and viral growth. Therefore, the complementation between the R-site mutant and the active-site mutant reconstituted wild-type Pra function. One feature of this intragenic complementation is that following sedimentation of infected-cell lysates on sucrose gradients, both N-terminally unprocessed and processed proteases were isolated from the fractions where normal B capsids sediment, suggesting that proteolytic processing occurs inside capsids. Our results demonstrate that the HSV-1 protease has distinct functional domains and some of these functions can complement in trans.

Identification of a minimal hydrophobic domain in the herpes simplex virus type 1 scaffolding protein which is required for interaction with the major capsid protein

Recent biochemical and genetic studies have demonstrated that an essential step of the herpes simplex virus type 1 capsid assembly pathway involves the interaction of the major capsid protein (VP5) with either the C terminus of the scaffolding protein (VP22a, ICP35) or that of the protease (Pra, product of UL26). To better understand the nature of the interaction and to further map the sequence motif, we expressed the C-terminal 30-amino-acid peptide of ICP35 in Escherichia coli as a glutathione S-transferase fusion protein (GST/CT). Purified GST/CT fusion proteins were then incubated with 35S-labeled herpes simplex virus type 1-infected cell lysates containing VP5. The interaction between GST/CT and VP5 was determined by coprecipitation of the two proteins with glutathione Sepharose beads. Our results revealed that the GST/CT fusion protein specifically interacts with VP5, suggesting that the C-terminal domain alone is sufficient for interaction with VP5. Deletion analysis of the GST/CT binding domain mapped the interaction to a minimal 12-amino-acid motif. Substitution mutations further revealed that the replacement of hydrophobic residues with charged residues in the core region of the motif abolished the interaction, suggesting that the interaction is a hydrophobic one. A chaotropic detergent, 0.1% Nonidet P-40, also abolished the interaction, further supporting the hydrophobic nature of the interaction. Computer analysis predicted that the minimal binding motif could form a strong alpha-helix structure. Most interestingly, the alpha-helix model maximizes the hydropathicity of the minimal domain so that all of the hydrophobic residues are centered around a Phe residue on one side of the alpha-helix. Mutation analysis revealed that the Phe residue is absolutely critical for the binding, since changes to Ala, Tyr, or Trp abrogated the interaction. Finally, in a peptide competition experiment, the C-terminal 25-amino-acid peptide, as well as a minimal peptide derived from the binding motif, competed with GST/CT for interaction with VP5. In addition, a cyclic analog of the minimal peptide which is designed to stabilize an alpha-helical structure competed more efficiently than the minimal peptide. The evidence suggests that the C-terminal end of ICP35 forms an alpha-helical secondary structure, which may bind specifically to a hydrophobic pocket in VP5.

The bovine herpesvirus 1 maturational proteinase and scaffold proteins can substitute for the homologous herpes simplex virus type 1 proteins in the formation of hybrid type B capsids

We determined the nucleotide sequence of a 3.5-kb region of the bovine herpesvirus 1 (BHV-1) genome which contained the complete BHV-1 homologs of the herpes simplex virus type 1 (HSV-1) UL26 and UL26.5 genes. In HSV-1, the UL26 and UL26.5 open reading frames encode scaffold proteins upon which viral capsids are assembled. The UL26-encoded protein is also a proteinase and specifically cleaves both itself and the UL26.5-encoded protein. The overall BHV-1-encoded amino acid sequence showed only 41% identity to the HSV-1 sequences and was most divergent in the regions defined to be involved in the scaffolding function. We substituted the proteins encoded by the BHV-1 homologs of the UL26 and UL26.5 open reading frames, expressed in baculovirus, for the corresponding HSV-1 proteins in an in vitro HSV-1 capsid assembly system. The proteins expressed from the BHV-1 UL26 and UL26.5 homologs facilitated the formation of hybrid type B capsids indistinguishable from those formed entirely with HSV-1-encoded proteins.

Release of the catalytic domain N(o) from the herpes simplex virus type 1 protease is required for viral growth

The herpes simplex virus type 1 (HSV-1) protease and its substrate, ICP35, are involved in the assembly of viral capsids and required for efficient viral growth. The full-length protease (Pra) consists of 635 amino acid (aa) residues and is autoproteolytically processed at the release (R) site and the maturation (M) site, releasing the catalytic domain No (VP24), Nb (VP21), and a 25-aa peptide. To understand the biological importance of cleavage at these sites, we constructed several mutations in the cloned protease gene. Transfection assays were performed to determine the functional properties of these mutant proteins by their abilities to complement the growth of the protease deletion mutant m100. Our results indicate that (i) expression of full-length protease is not required for viral replication, since a 514-aa protease molecule lacking the M site could support viral growth; and that (ii) elimination of the R site by changing the residue Ala-247 to Ser abolished viral replication. To better understand the functions that are mediated by proteolytic processing at the R site of the protease, we engineered an HSV-1 recombinant virus containing a mutation at this site. Analysis of the mutant A247S virus demonstrated that (i) the mutant protease retained the ability to cleave at the M site and to trans process ICP35 but failed to support viral growth on Vero cells, demonstrating that release of the catalytic domain No from Pra is required for viral replication; and that (ii) only empty capsid structures were observed by electron microscopy in thin sections of A247S-infected Vero cells, indicating that viral DNA was not encapsidated. Our results demonstrate that processing of ICP35 is not sufficient to support viral replication and provide genetic evidence that the HSV-1 protease has nuclear functions other than enzymatic activity.

The C-terminal 25 amino acids of the protease and its substrate ICP35 of herpes simplex virus type 1 are involved in the formation of sealed capsids

The herpes simplex virus type 1 protease and its substrate, ICP35, are involved in the assembly of viral capsids. Both proteins are encoded by a single open reading frame from overlapping mRNAs. The protease is autoproteolytically processed at two sites. The protease cleaves itself at the C-terminal site (maturation site) and also cleaves ICP35 at an identical site, releasing a 25-amino-acid (aa) peptide from each protein. To determine whether these 25 aa play a role in capsid assembly, we constructed a mutant virus expressing only Prb, the protease without the C-terminal 25 aa. Phenotypic analysis of the Prb virus in the presence and absence of ICP35 shows the following: (i) Prb retains the functional activity of the wild-type protease which supports virus growth in the presence of ICP35; (ii) in contrast to the ICP35 null mutant delta ICP35 virus, the Prb virus fails to grow in the absence of ICP35; and (iii) trans-complementation experiments indicated that full-length ICP35 (ICP35 c,d), but not the cleaved form (ICP35 e,f), complements the growth of the Prb virus. The most striking phenotype of the Prb virus is that only unsealed aberrant capsid structures are observed by electron microscopy in mutant-infected Vero cells. Our results demonstrate that the growth of herpes simplex virus type 1 requires the C-terminal 25 aa of either the protease or its substrate, ICP35, and that the C-terminal 25 aa are involved in the formation of sealed capsids.

Assembly of the herpes simplex virus capsid: requirement for the carboxyl-terminal twenty-five amino acids of the proteins encoded by the UL26 and UL26.5 genes

Herpes simplex virus type 1 (HSV-1) intermediate capsids are composed of seven proteins, VP5, VP19C, VP21, VP22a, VP23, VP24, and VP26, and the genes that encode these proteins, UL19, UL38, UL26, UL26.5, UL18, UL26, and UL35, respectively. The UL26 gene encodes a protease that cleaves itself and the product of the UL26.5 gene at a site (M site) 25 amino acids from the C terminus of these two proteins. In addition, the protease cleaves itself at a second site (R site) between amino acids 247 and 248. Cleavage of the UL26 protein gives rise to the capsid proteins VP21 and VP24, and cleavage of the UL26.5 protein gives rise to the capsid protein VP22a. Previously we described the production of HSV-1 capsids in insect cells by infecting the cells with recombinant baculoviruses expressing the six capsid genes (D. R. Thomsen, L. L. Roof, and F. L. Homa, J. Virol. 68:2442-2457, 1994). Using this system, we demonstrated that the products of the UL26 and/or UL26.5 genes are required as scaffolds for assembly of HSV-1 capsids. To better understand the functions of the UL26 and UL26.5 proteins in capsid assembly, we constructed baculoviruses that expressed altered UL26 and UL26.5 proteins. The ability of the altered UL26 and UL26.5 proteins to support HSV-1 capsid assembly was then tested in insect cells. Among the specific mutations tested were (i) deletion of the C-terminal 25 amino acids from the proteins coded for by the UL26 and UL26.5 genes; (ii) mutation of His-61 of the UL26 protein, an amino acid required for protease activity; and (iii) mutation of the R cleavage site of the UL26 protein. Analysis of the capsids formed with wild-type and mutant proteins supports the following conclusions: (i) the C-terminal 25 amino acids of the UL26 and UL26.5 proteins are required for capsid assembly; (ii) the protease activity associated with the UL26 protein is not required for assembly of morphologically normal capsids; and (iii) the uncleaved forms of the UL26 and UL26.5 proteins are employed in assembly of 125-nm-diameter capsids; cleavage of these proteins occurs during or subsequent to capsid assembly. Finally, we carried out in vitro experiments in which the major capsid protein VP5 was mixed with wild-type or truncated UL26.5 protein and then precipitated with a VP5-specific monoclonal antibody.(ABSTRACT TRUNCATED AT 400 WORDS)

The effect of internal autocleavage on kinetic properties of the human cytomegalovirus protease catalytic domain

The 28-kilodalton (kDa) catalytic domain of the human cytomegalovirus (HCMV) protease undergoes autoproteolytic cleavage at an internal site (I site), yielding amino-terminal 15-kDa (N15) and carboxyl-terminal 13-kDa (C13) fragments. I site autocleavage has been postulated to inactivate the protease and provide a mechanism for the negative regulation of enzyme activity during viral infection. We purified recombinant enzymes to demonstrate I site autocleavage in vitro and used site-directed mutagenesis of the I site to stabilize the protease. No difference in the kinetic properties of wild type and stabilized mutant proteases were observed in an in vitro peptide cleavage assay. The consequences of I site cleavage on enzyme activity were investigated two ways. First, autodigestion of the wild type enzyme converted the intact protease to N15 and C13 autocleavage products without a corresponding loss in enzyme activity. Second, genetic constructs encoding the N15 and C13 autocleavage products were generated and expressed separately in Escherichia coli, and each fragment was purified. An active enzyme was reconstituted by refolding a mixture of the purified fragments in vitro to form a noncovalent complex. The kinetic properties of this complex were very similar to the wild type and stabilized enzymes under optimal reaction conditions. We concluded from these studies that I site cleavage does not inactivate the HCMV protease, in the absence of other virally induced factors, and that limited potential exists for the regulation of catalytic activity by I site cleavage.

Phenotype of the herpes simplex virus type 1 protease substrate ICP35 mutant virus

The herpes simplex virus type 1 ICP35 assembly protein is involved in the formation of viral capsids. ICP35 is encoded by the UL26.5 gene and is specifically processed by the herpes simplex virus type 1 protease encoded by the UL26 gene. To better understand the functions of ICP35 in infected cells, we have isolated and characterized an ICP35 mutant virus, delta ICP35. The mutant virus was propagated in complementing 35J cells, which express wild-type ICP35. Phenotypic analysis of delta ICP35 shows that (i) mutant virus growth in Vero cells was severely restricted, although small amounts of progeny virus was produced; (ii) full-length ICP35 protein was not produced, although autoproteolysis of the protease still occurred in mutant-infected nonpermissive cells; (iii) viral DNA replication of the mutant proceeded at wild-type levels, but only a very small portion of the replicated DNA was processed to unit length and encapsidated; (iv) capsid structures were observed in delta ICP35-infected Vero cells by electron microscopy and by sucrose sedimentation analysis; (v) assembly of VP5 into hexons of the capsids was conformationally altered; and (vi) ICP35 has a novel function which is involved in the nuclear transport of VP5.

The size and symmetry of B capsids of herpes simplex virus type 1 are determined by the gene products of the UL26 open reading frame

Herpes simplex virus type 1 (HSV-1) B capsids are composed of seven proteins, designated VP5, VP19C, 21, 22a, VP23, VP24, and VP26 in order of decreasing molecular weight. Three proteins (21, 22a, and VP24) are encoded by a single open reading frame (ORF), UL26, and include a protease whose structure and function have been studied extensively by other investigators. The protease encoded by this ORF generates VP24 (amino acids 1 to 247), a structural component of the capsid and mature virions, and 21 (residues 248 to 635). The protease also cleaves C-terminal residues 611 to 635 of 21 and 22a, during capsid maturation. Protease activity has been localized to the N-terminal 247 residues. Protein 22a and probably the less abundant protein 21 occupy the internal volume of capsids but are not present in virions; therefore, they may form a scaffold that is used for B capsid assembly. The objective of the present study was to isolate and characterize a mutant virus with a null mutation in UL26. Vero cells were transformed with plasmid DNA that encoded ORF UL25 through UL28 and screened for their ability to support the growth of a mutant virus with a null mutation in UL27 (K082). Four of five transformants that supported the growth of the UL27 mutant also supported the growth of a UL27-UL28 double mutant. One of these transformants (F3) was used to isolate a mutant with a null mutation in UL26. The UL26 null mutation was constructed by replacement of DNA sequences specifying codons 41 through 593 with a lacZ reporter cassette. Permissive cells were cotransfected with plasmid and wild-type virus DNA, and progeny viruses were screened for their ability to grow on F3 but not Vero cells. A virus with these growth characteristics, designated KUL26 delta Z, that did not express 21, 22a, or VP24 during infection of Vero cells was isolated. Radiolabeled nuclear lysates from infected nonpermissive cells were layered onto sucrose gradients and subjected to velocity sedimentation. A peak of radioactivity for KUL26 delta Z that sedimented more rapidly than B capsids from wild-type-infected cells was observed. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis of the gradient fractions showed that the peak fractions contained VP5, VP19C, VP23, and VP26. Analysis of sectioned cells and of the peak fractions of the gradients by electron microscopy revealed sheet and spiral structures that appear to be capsid shells.(ABSTRACT TRUNCATED AT 400 WORDS)

Herpes simplex genes: the blueprint of a successful human pathogen

The Herpes simplex virus genome encodes 75 proteins. Of these, only 37 are required for growth of the virus in culture. These essential genes encode functions related to entry of virus into cells, regulation of gene expression and replication and packaging of viral DNA into virions. The genes that are not essential for replication in culture play a key role in multiplication of the virus and its transfer from cell to cell, in complementing cellular functions lost as a consequence of viral replication, in fine-tuning viral gene expression and in overcoming the host's response to infection. No virally encoded functions are required for establishment of the latent state, but a full complement of viral genes is essential for efficient reactivation of the virus from the latent state.

The protease of herpes simplex virus type 1 is essential for functional capsid formation and viral growth

The herpes simplex virus type 1 protease and related proteins are involved in the assembly of viral capsids. The protease encoded by the UL26 gene can process itself and its substrate ICP35, encoded by the UL26.5 gene. To better understand the functions of the protease in infected cells, we have isolated a complementing cell line (BMS-MG22) and constructed and characterized a null UL26 mutant virus, m100. The mutant virus failed to grow on Vero cells and required a complementing cell line for its propagation, confirming that the UL26 gene product is essential for viral growth. Phenotypic analysis of m100 shows that (i) normal amounts of the c and d forms of ICP35 were produced, but they failed to be processed to the cleaved forms, e and f; (ii) viral DNA replication of the mutant proceeded at near wild-type levels, but DNA was not processed to unit length or encapsidated; (iii) capsid structures were observed in thin sections of m100-infected Vero cells by electron microscopy, but assembly of VP5 into hexons of the capsid structure was conformationally altered; and (iv) nuclear localizations of the protease and ICP35 are independent of each other, and the function(s) of Na, at least in part, is to direct the catalytic domain N(o) to the nucleus.

Proteolytic activity of human cytomegalovirus UL80 protease cleavage site mutants

The human cytomegalovirus UL80 open reading frame encodes protease and assembly protein from its N- and C-terminal regions, respectively. We reported previously that a 30-kDa protease is derived by autoproteolytic processing of a polyprotein which is the translation product of the entire UL80 open reading frame (E. Z. Baum, G. A. Bebernitz, J. D. Hulmes, V. P. Muzithras, T. R. Jones, and Y. Gluzman, J. Virol. 67:497-506, 1993). Three autoproteolytic cleavage sites within the UL80 polyprotein were characterized; site 143 is within the protease domain and inactivates the protease. In this article, we report (i) expression analyses of UL80 in infected cells, including the processing kinetics of the UL80 polyprotein; (ii) the existence of an additional cleavage site (site 209) within the protease domain of the UL80 polyprotein; and (iii) the effect of mutagenesis at each of the cleavage sites upon proteolytic activity and steady-state levels of the UL80 processing products. During the course of infection, UL80 polyprotein processing begins at cleavage site 643 and follows at sites 256 and 143. Cleavage at site 643 and/or 256 within the polyprotein is not a prerequisite for efficient protease activity, since all three proteases (85-, 80-, and 30-kDa proteins) were equally active in cleaving the assembly protein precursor to its mature form. Inhibition of cleavage at site 143 resulted in a three- to sixfold increase in the steady-state level of the 30-kDa protease, supporting the hypothesis that cleavage at this site may represent a mechanism by which cytomegalovirus regulates the level of active protease.

The herpes simplex virus type 1 particle: structure and molecular functions. Review article

This review is a summary of our present knowledge with respect to the structure of the virion of herpes simplex virus type 1. The virion consists of a capsid into which the DNA is packaged, a tegument and an external envelope. The protein compositions of the structures outside the genome are described as well as the functions of individual proteins. Seven capsid proteins are identified, and two of them are mainly present in precursors of mature DNA-containing capsids. The protein components of the 150 hexamers and 12 pentamers in the icosahedral capsid are known. These capsomers all have a central channel and are connected by Y-shaped triplexes. In contrast to the capsid, the tegument has a less defined structure in which 11 proteins have been identified so far. Most of them are phosphorylated. Eleven virus-encoded glycoproteins are present in the envelope, and there may be a few more membrane proteins not yet identified. Functions of these glycoproteins include attachment to and penetration of the cellular membrane. The structural proteins, their functions, coding genes and localizations are listed in table form.

Assembly of herpes simplex virus (HSV) intermediate capsids in insect cells infected with recombinant baculoviruses expressing HSV capsid proteins

The capsid of herpes simplex virus type 1 (HSV-1) is composed of seven proteins, VP5, VP19C, VP21, VP22a, VP23, VP24, and VP26, which are the products of six HSV-1 genes. Recombinant baculoviruses were used to express the six capsid genes (UL18, UL19, UL26, UL26.5, UL35, and UL38) in insect cells. All constructs expressed the appropriate-size HSV proteins, and insect cells infected with a mixture of the six recombinant baculoviruses contained large numbers of HSV-like capsids. Capsids were purified by sucrose gradient centrifugation, and electron microscopy showed that the capsids made in Sf9 cells had the same size and appearance as authentic HSV B capsids. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis demonstrated that the protein composition of these capsids was nearly identical to that of B capsids isolated from HSV-infected Vero cells. Electron microscopy of thin sections clearly demonstrated that the capsids made in insect cells contained the inner electron-translucent core associated with HSV B capsids. In infections in which single capsid genes were left out, it was found that the UL18 (VP23), UL19 (VP5), UL38 (VP19C), and either the UL26 (VP21 and VP24) or the UL26.5 (VP22a) genes were required for assembly of 100-nm capsids. VP22a was shown to form the inner core of the B capsid, since in infections in which the UL26.5 gene was omitted the 100-nm capsids that formed lacked the inner core. The UL35 (VP26) gene was not required for assembly of 100-nm capsids, although assembly of B capsids was more efficient when it was present. These and other observations indicate that (i) the products of the UL18, UL19, UL35, and UL38 genes self-assemble into structures that form the outer surface (icosahedral shell) of the capsid, (ii) the products of the UL26 and/or UL26.5 genes are required (as scaffolds) for assembly of 100-nm capsids, and (iii) the interaction of the outer surface of the capsid with the scaffolding proteins requires the product of the UL18 gene (VP23).