The effect of motility and cell-surface polymers on bacterial attachment

Characterization and Bioactive Metabolite Profiling of Streptomyces sp. Y009: A Mangrove-Derived Actinomycetia with Anticancer and Antioxidant Potential

Microorganisms from poorly explored environments are promising sources for the development of novel drugs. In our continuous efforts to screen for mangrove actinomycetes that produce metabolites with potential pharmaceutical applications, Streptomyces sp. Y009 was isolated from mangrove sediments in Guangxi, China. The phenotypic, physiological, biochemical, and phylogenetic characteristics of this strain were investigated. Analysis of phylogenetic and 16S rRNA gene sequences showed that it had the highest sequence similarity to Streptomyces thermolilacinus NBRC 14274 (98.95%). Further, the Y009 extract exhibited antioxidant activity, as indicated by DPPH and superoxide dismutase assays. The extract showed broad-spectrum and potent anticancer potential against six human cancer cell lines, with IC50 values ranging from 5.61 to 72.15 μg/mL. Furthermore, the selectivity index (SI) demonstrated that the Y009 extract exhibited less toxicity toward normal cell lines in comparison to the lung cancer cell line (A549) and hepatoma cell line (HepG2). GC-MS analysis revealed that the extract contained some biologically important secondary metabolites, mainly cyclic dipeptides and esters, which might be responsible for the antioxidant and anticancer properties. 3-Isobutylhexahydropyrrolo[1,2-a]pyrazine-1,4-dione (28.32%) was the major chemical compound available in the extract. The effect on cancer cells was then confirmed using nuclear staining and in silico docking. This study suggests that further exploration of the bioactive compounds of the newly isolated strain may be a promising approach for the development of novel chemopreventive drugs.

Bactericidal Ability of Well-Controlled Cationic Polymer Brush Surfaces and the Interaction Analysis by Quartz Crystal Microbalance with Dissipation

In this study, cationic poly(2-(methacryloyloxy)ethyl) trimethylammonium chloride) (PMTAC) brush surfaces were prepared by surface-initiated atom transfer radical polymerization (SI-ATRP), and their properties were systematically investigated to discuss the factors affecting their bactericidal properties and interactions with proteins. Model equations for the analysis of electrophoretic behaviors were considered for accurate parameter estimation to indicate the charge density at the interface. The zeta potential dependency of the PMTAC brushes was successfully analyzed using Smolchowski's equation and the Gouy-Chapman model, which describes the diffusive electric double layer. The analysis of the quartz crystal microbalance with dissipation (QCM-D) indicated that the electrostatic interaction promoted protein adsorption, with a large quantity of a negatively charged protein, bovine serum albumin (BSA), being adsorbed. The bactericidal efficiency of the high-graft-density polymer brush (0.45 chains nm-2) was higher than that of the low-graft-density polymer brush (0.06 chains nm-2). To investigate the mechanism of this phenomenon, we applied the dissipation change (ΔD) of QCM-D analysis. The BSA was likewise adsorbed when the brush structure was changed; however, the negative ΔD indicated that the BSA-adsorbed, high-graft-density PMTAC brush became a rigid state. In the bacteria culture media, the behaviors were the same as BSA adsorption, and the high-graft-density polymer brush was also estimated to be more rigid than the low-graft-density polymer brush. Moreover, for S. aureus adhesion after incubating in TSB, a small slope of ΔD/ΔF plots considered initial adsorption of bacteria on the high-graft-density polymer brush strongly interacted compared to that of the low-graft-density polymer brush. The scattered value of the slope of ΔD/ΔF on the high-graft-density polymer brush was considered to be due to the dead bacteria between the bacteria and the polymer brush interface. These investigations for a well-defined cationic polymer brush will contribute to the design of antibacterial surfaces.

More effective application of biochar-based immobilization technology in the environment: Understanding the role of biochar

In recent years, biochar-based immobilization technology (BIT) has been widely used to treat different environmental issues because of its cost-effectiveness and high removal performance. However, the complexity of the real environment is always ignored, which hinders the transfer of the BIT from lab-scale to commercial applications. Therefore, in this review, the analysis is performed separately on the internal side of the BIT (microbial fixation and growth) and on the external side of the BIT (function) to achieve effective BIT performance. Importantly, the internal two stages of BIT have been discussed concisely. Further, the usage of BIT in different areas is summarized precisely. Notably, the key impacts were systemically analyzed during BIT applications including environmental conditions and biochar types. Finally, the suggestions and perspectives are elucidated to solve current issues regarding BIT.

Microalgae as Soft Permeable Particles

The colloidal stability of non-motile algal cells in water drives their distribution in space. An accurate description of the interfacial properties of microalgae is therefore critical to understand how microalgae concentrations can change in their biotope or during harvesting processes. Here, we probe the surface charges of three unicellular algae─Chlorella vulgaris, Nannochloropsis oculata, and Tetraselmis suecica─through their electrophoretic mobility. Ohshima's soft particle theory describes the electrokinetic properties of particles covered by a permeable polyelectrolyte layer, a usual case for biological particles. The results appear to fit the predictions of Ohshima's theory, proving that all three microalgae behave electrokinetically as soft particles. This allowed us to estimate two characteristic parameters of the polyelectrolyte external layer of microalgae: the volume charge density and the hydrodynamic penetration length. Results were compared with transmission electron microscopy observations of the algal cells' surfaces, and in particular of their extracellular polymeric layer, which was identified with the permeable shell evidenced by electrophoretic measurements. Noticeably, the algal surface potentials estimated from electrophoretic mobility using the soft particle theory are less negative than the apparent zeta potentials. This finding indicates that electrostatics are expected to play a minor role in phenomena of environmental and industrial importance, such as microalgae aggregation or adhesion.

Design of biointerfaces composed of soft materials using controlled radical polymerizations

Soft interface materials have an immense potential for the improvement of biointerfaces, which are the interface of biological and artificially designed materials. Controlling the chemical and physical structures of the interfaces at the nanometer level plays an important role in understanding the mechanism of the functioning and its applications. Controlled radical polymerization (CRP) techniques, including atom transfer radical polymerization (ATRP) and reversible addition-fragmentation chain-transfer (RAFT) polymerization, have been developed in the field of precision polymer chemistry. It allows the formation of well-defined surfaces such as densely packed polymer brushes and self-assembled nanostructures of block copolymers. More recently, a novel technique to prepare polymers containing biomolecules, called biohybrids, has also been developed, which is a consequence of the advancement of CRP so as to proceed in an aqueous media with oxygen. This review article summarizes recent advances in CRP for the design of biointerfaces.

Donnan Potential across the Outer Membrane of Gram-Negative Bacteria and Its Effect on the Permeability of Antibiotics

The cell envelope structure of Gram-negative bacteria is unique, composed of two lipid bilayer membranes and an aqueous periplasmic space sandwiched in between. The outer membrane constitutes an extra barrier to limit the exchange of molecules between the cells and the exterior environment. Donnan potential is a membrane potential across the outer membrane, resulted from the selective permeability of the membrane, which plays a pivotal role in the permeability of many antibiotics. In this review, we discussed factors that affect the intensity of the Donnan potential, including the osmotic strength and pH of the external media, the osmoregulated periplasmic glucans trapped in the periplasmic space, and the displacement of cell surface charges. The focus of our discussion is the impact of Donnan potential on the cellular permeability of selected antibiotics including fluoroquinolones, tetracyclines, β-lactams, and trimethoprim.

Tuning surface topographies on biomaterials to control bacterial infection

Microbial contamination and subsequent formation of biofilms frequently cause failure of surgical implants and a good understanding of the bacteria-surface interactions is vital to the design and safety of biomaterials. In this review, the physical and chemical factors that are involved in the various stages of implant-associated bacterial infection are described. In particular, topographical modification strategies that have been employed to mitigate bacterial adhesion via topographical mechanisms are summarized and discussed comprehensively. Recent advances have improved our understanding about bacteria-surface interactions and have enabled biomedical engineers and researchers to develop better and more effective antibacterial surfaces. The related interdisciplinary efforts are expected to continue in the quest for next-generation medical devices to attain the ultimate goal of improved clinical outcomes and reduced number of revision surgeries.

Evaluation of Rate of Adhesion of Lactobacillus namurensis Strain GYP-74 to Porous Fine Ceramics

This study aimed to evaluate the ratio of adherence of lactic acid bacteria (LAB) to porous fine ceramics in order to develop a novel LAB-rich pickle container for the production of functional fermented vegetables. Some LAB were isolated from the salted rice bran used for pickling (Nukadoko in Japanese). These isolates were classified in Lactobacillus namurensis by phylogenetic analysis. Some pottery-shard (PS) samples were prepared by varying the mixing rate of polyacetal (POM) resin to clay (0–30% (v/v)) and the burning temperature (1000 °C or 1100 °C). A test of the adherence of strain GYP-74 to the PSs was performed. The results showed that the adherence rate was significantly higher in the PSs burned at 1100 °C as compared with those burned at 1000 °C. A pore distribution analysis showed that pore sizes of less than a few µm and pore sizes in the range of a few µm to a few hundred µm were mainly distributed in the PSs without and with POM, respectively. X-ray diffraction analysis showed that both PSs with and without POM contained quartz and hematite. The PSs burned at 1000 °C and 1100 °C specifically contained microcline and mullite, respectively. This study revealed the basal information regarding what makes PSs adequate for LAB adhesion.

Bacterial motility enhances adhesion to oil droplets

Adhesion of bacteria to liquid-liquid interfaces can play a role in the biodegradation of dispersed hydrocarbons and in biochemical and bioprocess engineering. Whereas thermodynamic factors underpinning adhesion are well studied, the role of bacterial activity on adhesion is less explored. Here, we show that bacterial motility enhances adhesion to surfactant-decorated oil droplets dispersed in artificial sea water. Motile Halomonas titanicae adhered to hexadecane droplets stabilized with dioctyl sodium sulfosuccinate (DOSS) more rapidly and at greater surface densities compared to nonmotile H. titanicae, whose flagellar motion was arrested through addition of a proton uncoupler. Increasing the concentration of DOSS reduced the surface density of both motile and nonmotile bacteria as a result of the reduced interfacial tension.

Process Description of an Unconventional Biofilm Formation by Bacterial Cells Autoagglutinating through Sticky, Long, and Peritrichate Nanofibers

In this study, we elucidated the formation process of an unconventional biofilm formed by a bacterium autoagglutinating through sticky, long, and peritrichate nanofibers. Understanding the mechanisms of biofilm formation is essential to control microbial behavior and improve environmental biotechnologies. Acinetobacter sp. Tol 5 autoagglutinate through the interaction of the long, peritrichate nanofiber protein AtaA, a trimeric autotransporter adhesin. Using AtaA, without cell growth or extracellular polymeric substances production, Tol 5 cells quickly form an unconventional biofilm. The process forming this unconventional biofilm started with cell-cell interactions, proceeded to cell clumping, and led to the formation of large cell aggregates. The cell-cell interaction was described by Derjaguin-Landau-Verwey-Overbeek (DLVO) theory based on a new concept, which considers two independent interactions between two cell bodies and between two AtaA fiber tips forming a discontinuous surface. If cell bodies cannot collide owing to an energy barrier at low ionic strengths but approach within the interactive distance of AtaA fibers, cells can agglutinate through their contact. Cell clumping proceeds following the cluster-cluster aggregation model, and an unconventional biofilm containing void spaces and a fractal nature develops. Understanding its formation process would extend the utilization of various types of biofilms, enhancing environmental biotechnologies.

Viral Attachment to Biotic and Abiotic Surfaces in Seawater

Viruses influence microbial community structure and biogeochemical cycles in marine environments. Viral attachment to nonhost surfaces could influence host viral infection rates; however, the prevalence of such viral attachment is not investigated quantitatively. We used coastal seawater viral assemblages and, as models, marine vibriophage (SIO-2) and enterobacteriophages (T2 and T4) to investigate their attachment to probable nonhost marine bacteria. We also studied viral attachment to colloids and other abiotic surfaces in seawater. Centrifugation experiments with bacterium-virus mixtures showed substantial viral loss in the supernatant presumably due to the viral attachment to bacteria. This attachment (0.04 to 24 viruses μm^-2 [bacterial surface area]) varied with bacterium-virus combinations. Surprisingly, filtering seawater on 0.2-μm Anodisc or polycarbonate filters retained ∼12 to 84% of viruses presumably attached to ≥0.2-μm-sized particles and/or the filter surface. Enzymatic digestion followed by epifluorescence and atomic force microscopy suggested that 7 to 25% of the total viruses were attached via β-glycosidic linkages. Furthermore, a substantial proportion (7 to 48%) of viruses became attached to model abiotic surfaces (polycarbonate, polypropylene, and glass), and this has significance for laboratory protocols as well as studies of virus ecology in particle-rich marine environments. Substantial attachment of viruses to nonhost surfaces could influence virus-driven biogeochemical cycles and microbial community structure.IMPORTANCE Viruses play important roles in altering microbial community structure and biogeochemical cycles in marine environments. Viral attachment to nonhost surfaces can influence host viral infection rates; however, the prevalence of viral attachment to nonhost surfaces and the ratio of attached viruses to total viruses are little known. We used coastal seawater viral assemblages and used marine vibriophage (SIO-2) and enterobacteriophages (T2 and T4) as models to investigate their attachment to abiotic and biotic surfaces in seawater. Viral attachment was observed on several surfaces, such as nonhost bacteria, polymers, filters, cover glasses, and tube surfaces. This study cautions against commonly used protocols that require viral incubation and seawater fractionation. More importantly, these results could influence virus-driven biogeochemical cycles and microbial community structure in the ocean.

Optimizing carbon fibre supports for bioreactors by nitric acid oxidation and calcium ion coverage according to extended DLVO theory

Optimizing supports for microorganisms is required for bioreactors. Carbon fibres (CF) were employed as supports for microorganisms. To optimize CF supports for immobilizing bacterial cells, we used methods of nitric acid oxidation and calcium ion coverage. We evaluated the capacity of these CF supports (untreated CF, nitric acid oxidation CF and Ca²⁺-covered CF) via bacterial cell adhesion tests, based on extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory. The results implied that because of the high hamaker constants, oxidized CF supports had higher capacity in this regard than untreated CF supports. However, the growing oxygen groups increased the negative zeta potential of CF supports, thus likely to reduce their capacity, in accordance with XDLVO theory. Since the Ca²⁺ coverage could decrease the negative zeta potentials of CF without reducing the hamaker constants, it could enhance the capacity of oxidized CF supports. We concluded that a combination of nitric acid oxidation and Ca²⁺ coverage could increase the capacity of CF supports to immobilize bacterial cells.

Liposome-Surface-Initiated ARGET ATRP: Surface Softness Generated by "Grafting from" Polymerization

Liposomes are self-assembled vesicles of amphiphilic lipid molecules, which have been investigated as models of cells, or tools for drug delivery systems. In these systems, the surface property of the liposomes plays an important role. In this study, we demonstrated a novel polymer modification of liposome surfaces using a controlled radical polymerization, "activators regenerated by electron transfer for atom transfer radical polymerization", in aqueous media without a deoxygenation step. Dynamic light scattering and ¹H NMR measurement indicated the successful modification of the polymer on the liposome surface. The molecular weight of the grafted polymer chain was systematically controlled by changing the monomer concentrations in the "grafting from" polymerization. Moreover, the modification resulted in a notable increase in surface softness as indicated by electrophoretic behavior, which was comparable to the surface of cells. The preparation method and the characterization presented in this study would be a helpful guideline in designing the polymer/liposome hybrid having target surface properties.

Micro- and Nanotopography Sensitive Bacterial Attachment Mechanisms: A Review

Bacterial attachment to material surfaces can lead to the development of biofilms that cause severe economic and health problems. The outcome of bacterial attachment is determined by a combination of bacterial sensing of material surfaces by the cell and the physicochemical factors in the near-surface environment. This paper offers a systematic review of the effects of surface topography on a range of antifouling mechanisms, with a focus on how topographical scale, from micro- to nanoscale, may influence bacterial sensing of and attachment to material surfaces. A good understanding of these mechanisms can facilitate the development of antifouling surfaces based on surface topography, with applications in various sectors of human life and activity including healthcare, food, and water treatment.

Cyclo(l-Pro⁻l-Leu) of Pseudomonas putida MCCC 1A00316 Isolated from Antarctic Soil: Identification and Characterization of Activity against Meloidogyne incognita

Pseudomonas putida MCCC 1A00316 was originally isolated from an Antarctic soil and has demonstrated potential nematicidal activity. Thus, it has promising applications for the biological control of Meloidogyne incognita. The larval mortality and egg-hatching inhibition rates of M. incognita will increase with the rising concentration of culture filtrates of P. putida MCCC 1A00316 and the duration of exposure. Thus, this study aimed to separate, purify, and identify nematicidal compounds from P. putida MCCC 1A00316 and to validate their anti-M. incognita activities. Compounds were purified through silica gel column chromatography and thin-layer chromatography combined with high-performance liquid chromatography (HPLC). Structural identification was conducted through liquid chromatography time-of-flight mass spectrometry, ¹H nuclear magnetic resonance (NMR) spectroscopy, ¹³C-NMR, and Marfey’s method. The isolated compounds were identified as cyclo(l-Pro–l-Leu) on the basis of the results of the above analyses and previously reported data. The effects of various concentrations of cyclo(l-Pro–l-Leu) on the mortality rates of second-stage juveniles (J2) of M. incognita were investigated. Results showed that HPLC-purified cyclo(l-Pro–l-Leu) displayed nematicidal activities. The mortality rate of M. incognita J2 reached 84.3% after 72 h of exposure to 67.5 mg/L cyclo(l-Pro–l-Leu). The lowest egg-hatching rate (9.74%) was observed after 8 days of incubation with 2000 mg/L cyclo(l-Pro–l-Leu). An egg-hatching rate of 53.11% was obtained under the control treatment (sterile distilled water). However, cyclo(l-Pro–l-Leu) did not elicit chemotaxis activity to M. incognita. This is the first work to investigate the anti-M. incognita characteristics of cyclo(l-Pro–l-Leu).

Paracoccus seriniphilus adhered on surfaces: Resistance of a seawater bacterium against shear forces under the influence of roughness, surface energy, and zeta potential of the surfaces

Bacteria in flowing media are exposed to shear forces exerted by the fluid. Before a biofilm can be formed, the bacteria have to attach to a solid surface and have to resist these shear forces. Here, the authors determined dislodgement forces of single Paracoccus seriniphilus bacteria by means of lateral force microscopy. The first measurement set was performed on very flat glass and titanium (both as very hydrophilic samples with water contact angles below 20°) as well as highly oriented pyrolytic graphite (HOPG) and steel surfaces (both as more hydrophobic surfaces in the context of biological interaction with water contact angles above 50°). The different surfaces also show different zeta potentials in the range between -18 and -108 mV at the measurement pH of 7. The second set comprised titanium with different RMS (root mean square) roughness values from a few nanometers up to 22 nm. Lateral forces between 0.5 and 3 nN were applied. For Paracoccus seriniphilus, the authors found as a general trend that the surface energy of the substrate at comparable roughness determines the detachment process. The surface energy is inversely proportional to the initial adhesion forces of the bacterium with the surface. The higher the surface energy (and the lower the initial adhesion force) is, the easier the dislodgement of the bacteria happens. In contrast, electrostatics play only a secondary role in the lateral dislodgement of the bacteria and may come only into play if surface energies are the same. Furthermore, the surface chemistry (glass, titanium, and steel as oxidic surfaces and HOPG as a nonoxidic surface) seems to play an important role because HOPG does not completely follow the above mentioned general trend found for the oxide covered surfaces. In addition, the roughness of the substrates (made of the same material) is limiting the lateral dislodgement of the bacteria. All examined structures with RMS roughness of about 8-22 nm on titanium prevent the bacteria from the lateral dislodgement compared to polished titanium with an RMS roughness of about 3 nm.

Fish pathogen bacteria: Adhesion, parameters influencing virulence and interaction with host cells

Wild fisheries are declining due to over-fishing, climate change, pollution and marine habitat destructions among other factors, and, concomitantly, aquaculture is increasing significantly around the world. Fish infections caused by pathogenic bacteria are quite common in aquaculture, although their seriousness depends on the season. Drug-supplemented feeds are often used to keep farmed fish free from the diseases caused by such bacteria. However, given that bacteria can survive well in aquatic environments independently of their hosts, bacterial diseases have become major impediments to aquaculture development. On the other hand, the indiscriminate uses of antimicrobial agents has led to resistant strains and the need to switch to other antibiotics, although it seems that an integrated approach that considers not only the pathogen but also the host and the environment will be the most effective method in the long-term to improve aquatic animal health. This review covers the mechanisms of bacterial pathogenicity and details the foundations underlying the interactions occurring between pathogenic bacteria and the fish host in the aquatic environment, as well as the factors that influence virulence. Understanding and linking the different phenomena that occur from adhesion to colonization of the host will offer novel and useful means to help design suitable therapeutic strategies for disease prevention and treatment.

Carbon nanotubes/carbon fiber hybrid material: a super support material for sludge biofilms

Carbon fiber (CF) is widely used as a sludge biofilm support material for wastewater treatment. Carbon nanotubes/carbon fiber (CNTs/CF) hybrid material was prepared by ultrasonically assisted electrophoretic deposition (EPD). CF supports (CF without handling, CF oxidized by nitric acid, CNTs/CF hybrid material) were evaluated by sludge immobilization tests, bacterial cell adsorption tests and Derjaguin -Landau -Verwey -Overbeek (DLVO) theory. We found that the CNTs/CF hybrid material has a high capacity for adsorbing activated sludge, nitrifying bacterial sludge and pure strains (Escherichia coli and Staphylococcus aureus). CNTs deposited on CF surface easily wound around the curved surface of bacterial cell which resulted in capturing more bacterial cells. DLVO theory indicated the lowest total interaction energy of CNTs/CF hybrid material, which resulted in the highest bacteria cell adsorption velocity. Experiments and DLVO theory results proved that CNTs/CF hybrid material is a super support material for sludge biofilms.

The Surface Layer Homology Domain-Containing Proteins of Alkaliphilic Bacillus pseudofirmus OF4 Play an Important Role in Alkaline Adaptation via Peptidoglycan Synthesis

It is well known that the Na⁺ cycle and the cell wall are essential for alkaline adaptation of Na⁺-dependent alkaliphilic Bacillus species. In Bacillus pseudofirmus OF4, surface layer protein A (SlpA), the most abundant protein in the surface layer (S-layer) of the cell wall, is involved in alkaline adaptation, especially under low Na⁺ concentrations. The presence of a large number of genes that encode S-layer homology (SLH) domain-containing proteins has been suggested from the genome sequence of B. pseudofirmus OF4. However, other than SlpA, the functions of SLH domain-containing proteins are not well known. Therefore, a deletion mutant of the csaB gene, required for the retention of SLH domain-containing proteins on the cell wall, was constructed to investigate its physiological properties. The csaB mutant strain of B. pseudofirmus OF4 had a chained morphology and alkaline sensitivity even under a 230 mM Na⁺ concentration at which there is no growth difference between the parental strain and the slpA mutant strain. Ultra-thin section transmission electron microscopy showed that a csaB mutant strain lacked an S-layer part, and its peptidoglycan (PG) layer was disturbed. The slpA mutant strain also lacked an S-layer part, although its PG layer was not disturbed. These results suggested that the surface layer homology domain-containing proteins of B. pseudofirmus OF4 play an important role in alkaline adaptation via peptidoglycan synthesis.

Multiple Modes of Nematode Control by Volatiles of Pseudomonas putida 1A00316 from Antarctic Soil against Meloidogyne incognita

Pseudomonas putida 1A00316 isolated from Antarctic soil showed nematicidal potential for biological control of Meloidogyne incognita; however, little was known about whether strain 1A00316 could produce volatile organic compounds (VOCs), and if they had potential for use in biological control against M. incognita. In this study, VOCs produced by a culture filtrate of P. putida 1A00316 were evaluated by in vitro experiments in three-compartment Petri dishes and 96-well culture plates. Our results showed that M. incognita juveniles gradually reduced their movement within 24-48 h of incubation with mortality ranging from 6.49 to 86.19%, and mostly stopped action after 72 h. Moreover, egg hatching in culture filtrates of strain 1A00316 was much reduced compared to that in sterile distilled water or culture medium. Volatiles from P. putida 1A00316 analysis carried out by solid-phase micro-extraction gas chromatography-mass spectrometry (SPME-GC/MS) included dimethyl-disulfide, 1-undecene, 2-nonanone, 2-octanone, (Z)-hexen-1-ol acetate, 2-undecanone, and 1-(ethenyloxy)-octadecane. Of these, dimethyl-disulfide, 2-nonanone, 2-octanone, (Z)-hexen-1-ol acetate, and 2-undecanone had strong nematicidal activity against M. incognita J2 larvae by direct-contact in 96-well culture plates, and only 2-undecanone acted as a fumigant. In addition, the seven VOCs inhibited egg hatching of M. incognita both by direct-contact and by fumigation. All of the seven VOCs repelled M. incognita J2 juveniles in 2% water agar Petri plates. These results show that VOCs from strain 1A00316 act on different stages in the development of M. incognita via nematicidal, fumigant, and repellent activities and have potential for development as agents with multiple modes of control of root-knot nematodes.

Bacterial Interactions with Immobilized Liquid Layers

Bacterial interactions with surfaces are at the heart of many infection-related problems in healthcare. In this work, the interactions of clinically relevant bacteria with immobilized liquid (IL) layers on oil-infused polymers are investigated. Although oil-infused polymers reduce bacterial adhesion in all cases, complex interactions of the bacteria and liquid layer under orbital flow conditions are uncovered. The number of adherent Escherichia coli cells over multiple removal cycles increases in flow compared to static growth conditions, likely due to a disruption of the liquid layer continuity. Surprisingly, however, biofilm formation appears to remain low regardless of growth conditions. No incorporation of the bacteria into the layer is observed. Bacterial type is also found to affect the number of adherent cells, with more E. coli remaining attached under dynamic orbital flow than Staphylococcus aureus, Pseudomonas aeruginosa under identical conditions. Tests with mutant E. coli lacking flagella confirm that flagella play an important role in adhesion to these surfaces. The results presented here shed new light on the interaction of bacteria with IL layers, highlighting the fundamental differences between oil-infused and traditional solid interfaces, as well as providing important information for their eventual translation into materials that reduce bacterial adhesion in medical applications.

Preincubation of Escherichia coli ATCC 25922 with NaCl Increases Its Attachment to Lettuce Surfaces Compared with Other Chemicals

　The inhibition of microbial attachment to food is important for the prevention of cross-contamination during food processing. The effect of several chemicals that were added in an Escherichia coli growth medium on the attachment of the bacterium to lettuce was investigated. E. coli ATCC 25922, which is reportedly a useful surrogate for E. coli O157:H7 in surface attachment studies, was preincubated in a nutrient broth (NB) containing sodium chloride, potassium chloride, sodium deoxycholate, sodium linear alkylbenzene sulfonate, or sorbic acid. The bacterial cells were placed in contact with cut lettuce in a saline solution at 5℃ for 24 hours. Only the addition of NaCl in the NB influenced the attachment of E. coli, Salmonella enterica subsp. Enteritidis, and Klebsiella pneumoniae to the lettuce. The attachment of E. coli showed the largest significant increase at 2% NaCl. Changes in the attachment levels were not due to surface hydrohobicity or the motility of E. coli cells. Similar results were observed for S. enterica although the variation in the degree of attachment of the latter was quite small. These results suggested that the attachment of E. coli O157:H7 to food surfaces is influenced by the bacterial growth conditions prior to food exposure and prior to the development of the biofilm; furthermore, the environmental NaCl concentration should be controlled during food processing to prevent the cross-contamination of foods with E. coli.

pH-gradient ion-exchange microbial cell chromatography as a simple method for microbial separation

Selective separation of specific microbial types from a heterogeneous microbial population, such as an environmental microbial community, is an important process for microbial research and biotechnological industries. In the present study, pH-gradient ion-exchange microbial cell chromatography (PIE-MCC) was developed as a new method for microbial separation. The proposed method enables target microorganisms to be separated from a microbial community based on differences in microbial surface characteristics, because these characteristics, such as the ζ (zeta)-potential, vary among microbial cells. PIE-MCC was conducted by controlling the adhesion and detachment of microbial cells to and from the carrier surface by manipulating the pH of the running buffer. As a proof of concept, microbial cell separation via PIE-MCC was demonstrated using pure-cultured strains, model mixtures of two different pure-cultured strains, and an environmental sample targeting uncultivated microorganisms; i.e., each pure-cultured strain showed unique chromatograms; specific single species were separated from the model mixture; and a specific, uncultivated target was separated from the environmental sample. The ζ-potential of several tested strains suggested that not only electrostatic interactions, but also other factors affected microbial adhesion to the carrier surface. The newly developed method has several potential advantages compared with other techniques, not only in terms of its microbial separation capability, but also in terms of its simplicity and ability to be scaled up. Thus, the method has the potential to be widely used for a variety of purposes in the microbiology and biotechnology fields.

Control of Attachment of Pseudomonas aeruginosa and Burkholderia cepacia to Surfaces by Shear Force

  The effect of physical shearing on the attachment of six Pseudomonas aeruginosa strains and six Burkholderia cepacia strains to glass, stainless steel, polystyrene and Teflon® was determined. A significant (p < 0.05) decrease in hydrophobicity was apparent for all P. aeruginosa strains (17-36%) and B. cepacia, MS 5 (20%) after shearing. A significant (p < 0.05) decrease in attachment of some P. aeruginosa (0.2-0.5 log CFU/cm2) and B. cepacia (0.2-0.4 log CFU/cm2) strains to some surface types was apparent after shearing. Significant (p < 0.05) correlation was observed for both numbers of flagellated cells and hydrophobicity against attachment to glass, stainless steel and polystyrene for P. aeruginosa while only hydrophobicity showed significant correlation against the same surfaces for B. cepacia. Scanning electron microscopy and protein analysis showed that shearing removed surface proteins from the cells and may have led to the observed changes in hydrophobicity and attachment to abiotic surfaces.

Electrostatic interaction of soft particles

Theories of the electrostatic interaction between two soft particles (i.e., particles covered with an ion-penetrable surface layer of polyelectrolytes) in an electrolyte solution are reviewed. Interactions of soft particles after contact of their surface layers are particularly discussed. Interaction in a salt-free medium and the discrete-charge effect are also treated.

Measurement of microbial adhesive forces with a parallel plate flow chamber

HYPOTHESIS

It was predicted that the colloidal behaviors of archaea and bacteria with disparate surface structure were different. In this study, the effects of the physicochemical properties of microbial cell surfaces on colloidal behavior were analyzed with Derjaguin-Landau-Verwey-Overbeek (DLVO) theory, thermodynamics, and powder technology.

EXPERIMENTS

Cell attachment and detachment from model substrates were directly observed using a parallel plate flow chamber. Gram-negative Escherichia coli and archaeal Methanosarcina barkeri were used as model microbial cells, and positively and negatively charged glass slides were used as model substrates.

FINDINGS

Microbial adhesion on both substrates agreed well with predictions calculated from DLVO theory, using experimental parameters. The total number of cells detached from the substrates as a function of flow rate was fit with the Weibull distribution function. In addition, the drag force required for detachment, which was estimated from the hydrodynamic forces, had a wide distribution; however, the forces became smaller with increasing ionic strength because of reduced electrostatic interactions between the cells and the substrate. M. barkeri could not be detached from positively charged substrates because it would entail a negative change in the interfacial energy of interaction. Thus adhesion was thermodynamically favored in this case.

Universal quantifier derived from AFM analysis links cellular mechanical properties and cell-surface integration forces with microbial deposition and transport behavior

In this study, we employed AFM analysis combined with mathematical modeling for quantifying cell-surface contact mechanics and magnitude and range of cell-surface interaction forces for seven bacterial strains with a wide range of cell morphology, dimension, and surface characteristics. Comprehensive cell-surface characterization including surface charge, extracellular polymeric substance content, hydrophobicity, and cell-cell aggregation analyses were performed. Flow-through column tests were employed to determine the attachment efficiency and deposition-transport behavior of these bacterial strains. No statistically significant correlation between attachment efficiency and any single-cell surface property was identified. Single-cell characterization by atomic force microscopy (AFM) yielded the mechanical deformation and elastic modulus, penetration resistance to AFM probe penetration by cellular surface substances (CSS), range and magnitude of the repulsive-attractive intersurface forces, and geometry of each strain. We proposed and derived a universal dimensionless modified Tabor's parameter to integrate all these properties that account for their collective behavior. Results showed that the Tabor parameter derived from AFM analysis correlated well with experimentally determined attachment efficiency (α), which therefore is able to link microscale cell-surface properties with macroscale bacterial transport behavior. Results suggested that the AFM tests performed between a single cell and a surface captured the key quantities of the interactions between the cell and the surface that dictate overall cell attachment behavior. Tabor's parameter therefore can be potentially incorporated into the microbial transport model.

Periplasmic flagellar export apparatus protein, FliH, is involved in post-transcriptional regulation of FlaB, motility and virulence of the relapsing fever spirochete Borrelia hermsii

Spirochetes are bacteria characterized in part by rotating periplasmic flagella that impart their helical or flat-wave morphology and motility. While most other bacteria rely on a transcriptional cascade to regulate the expression of motility genes, spirochetes employ post-transcriptional mechanism(s) that are only partially known. In the present study, we characterize a spontaneous non-motile mutant of the relapsing fever spirochete Borrelia hermsii that was straight, non-motile and deficient in periplasmic flagella. We used next generation DNA sequencing of the mutant's genome, which when compared to the wild-type genome identified a 142 bp deletion in the chromosomal gene encoding the flagellar export apparatus protein FliH. Immunoblot and transcription analyses showed that the mutant phenotype was linked to the posttranscriptional deficiency in the synthesis of the major periplasmic flagellar filament core protein FlaB. Despite the lack of FlaB, the amount of FlaA produced by the fliH mutant was similar to the wild-type level. The turnover of the residual pool of FlaB produced by the fliH mutant was comparable to the wild-type spirochete. The non-motile mutant was not infectious in mice and its inoculation did not induce an antibody response. Trans-complementation of the mutant with an intact fliH gene restored the synthesis of FlaB, a normal morphology, motility and infectivity in mice. Therefore, we propose that the flagellar export apparatus protein regulates motility of B. hermsii at the post-transcriptional level by influencing the synthesis of FlaB.

An overview of the methodological approach to the in vitro study of anti-infective biomaterials

Biomaterial-associated infections have an enormous impact in terms of morbidity of the patients and costs to national health systems. Perioperative antibiotics and aseptic procedures have not proved sufficient to eradicate the occurrence of this type of infections which often lead to devastating effects. Adjunctive strategies for preventing the establishment of infections are increasingly being centered on the development of new biomaterials with anti-infective properties. The creation of new anti-infective biomaterials can be obtained by alternative approaches oriented to achieve either bacteria-repellent surfaces or bioactive surfaces expressing self-sterilizing properties when not even able to treat pre-existing infections in the surrounding tissues. Here, we offer a short overview of the currently available in vitro methods that can be used to investigate and assess the performance of anti-infective biomaterials, with special emphasis on those whose mechanism of action is based on bacteria-repellent surfaces.

Carbon fiber as an excellent support material for wastewater treatment biofilms

Fibrous materials made of carbon fiber (CF), aromatic polyamide (AP), preoxidized polyacrylonitrile (PAN), and polyethylene (PE), which are widely used in the textile industry, were evaluated as biofilm supports for wastewater treatment. We found that CF has a high capacity for adsorbing nitrifying bacterial sludge. The adhesion rate of four pure strains-Cytophaga hutchinsonii, Alcaligenes faecalis, Bacillus subtilis, and Escherichia coli-was highest to CF. The ζ-potentials of the fibrous supports, and the cell surface potentials of these bacteria on the basis of the soft particle theory, were experimentally determined. Bacterial cell adhesion to the fibrous supports could be explained by Derjaguin-Landau-Verwey-Overbeek theory. Interaction energy profiles based on this theory indicated the disappearance of the energy barrier in bacterial cell adhesion to the CF support, whereas an insurmountable energy barrier was observed in the adhesion to the other fibrous supports. This result was attributed to the less negative ζ-potential of CF and the relatively large Hamaker constant for the CF/bacterium interaction in water; through simulations, the latter factor was found to make a greater contribution to lowering the energy barrier. In practice and theory, CF is an excellent material as a microbial and biofilm support for wastewater treatment.

Determination of zeta potential in Planctomycetes and its application in heavy metals toxicity assessment

Zeta potential of Planctomycetes was evaluated under different environmental conditions and correlated to cell viability. Phylogenetically distinct strains of the Planctomycetes presented different negative zeta potential values. More negative values were associated with Rhodopirellula spp. and related to the great amount of fimbriae in these species. Milli-Q water was chosen as the best dispersion media to perform the measurements. Zeta potential increased with ionic strength and varied with pH. In the physiological range of pH 5.0-9, zeta potential remained low and Rhodopirellula sp. strain LF2 cells were viable. Out of this range, zeta potential increased significantly and viability decreased. The effect on zeta potential of arsenic, cadmium, chromium, copper, lead, nickel, and zinc was assessed in Rhodopirellula sp. strain LF2. Zeta potential increased with increasing toxicity of the heavy metals in a dose-response way. This result was confirmed by the results observed for Rhodopirellula baltica strain SH1 under copper toxicity. Lead was the most toxic metal and zinc was the least toxic as observed by zeta potential and viability. The results support a correlation between zeta potential and cell viability which seem to indicate the possibility to use it as a viability predictor for the effects of heavy metals toxicity.

Accumulation of swimming bacteria near a solid surface

We measured the distribution of a forward swimming strain of Caulobacter crescentus near a surface using a three-dimensional tracking technique based on dark field microscopy and found that the swimming bacteria accumulate heavily within a micrometer from the surface. We attribute this accumulation to frequent collisions of the swimming cells with the surface, causing them to align parallel to the surface as they continually move forward. The extent of accumulation at the steady state is accounted for by balancing alignment caused by these collisions with the rotational Brownian motion of the micrometer-sized bacteria. We performed a simulation based on this model, which reproduced the measured results. Additional simulations demonstrate the dependence of accumulation on swimming speed and cell size, showing that longer and faster cells accumulate more near a surface than shorter and slower ones do.

The CQ ratio of surface energy components influences adhesion and removal of fouling bacteria

The interaction energy between bacteria and substrata with different surface energies was modelled by the extended DLVO (Derjaguin, Landau, Verwey and Overbeek) theory. The modeling results revealed that the interaction energy has a strong correlation with the CQ (Chen and Qi) ratio, which is defined as the ratio of the Lifshitz-van der Waals (LW) apolar to the electron donor surface energy components of substrata. Both modeling and experimental results with different bacteria including P. fluorescens, Cobetia marina and Vibrio alginolyticus demonstrated that if the LW surface energy of bacteria is larger than that of water, which is the case for most bacteria, the number of adhered bacteria decreases with a decreasing CQ ratio while bacterial removal rate increases with a decreasing CQ ratio. However, if the LW surface energy of bacteria is less than that of water, the opposite results are obtained. The CQ ratio gives a clear direction for the design of anti-biofouling and biofouling-release coatings through surface modification.

Short time-scale bacterial adhesion dynamics

In natural conditions many bacterial populations are found as surface-attached communities exhibiting features distinct from those of planktonic cells. We focus here on the question of initial adhesion, the mechanisms of which are still far from being fully understood. Recently, the frontier between microbiologists and physicists has become increasingly permeable, boosting implementation of new methodological approaches for better elucidating the intricate aspects of initial bacterial adhesion. After discussing briefly the main sources of complexity that confuse the understanding of the early steps of cell-surface attachment, we present a selection of physical methods enabling real-time measurement of early adhesion kinetics in live cells. We also discuss the limitations and pitfalls that might appear when applying such methodologies - initially designed for studying physically ideal systems - to analysis of these, more complex, living systems. We address mainly on the use of dispersed-surfaces flow cytometry (DS-FCM), quartz microbalance (QCM) and surface plasmon resonance (SPR) approaches, and give a brief survey of new perspectives in optical microscopy. We conclude that the use of combined and multiparametric technical approaches will lead to significant advances in providing a comprehensive understanding of the early events in bacterial adhesion.

Salt modulates bacterial hydrophobicity and charge properties influencing adhesion of Pseudomonas aeruginosa (PA01) in aqueous suspensions

The influence on cell hydrophobicity of differential extension with ionic strength of lipopolysaccharide molecules (LPS), which exist as charged and uncharged polymers at the surface of the gram-negative bacterium Pseudomonas aeruginosa (PA01), has been investigated. Attenuated total reflection infrared (ATR-IR) spectral absorptions from a single layer of cells adsorbed to ZnSe increased in intensity with increasing NaCl concentration up to 0.1 mol L(-1). Dynamic contact angle measurements (Wilhelmy plate tensiometry) made with a ZnSe plate having an adsorbed cell layer and the adherence of the cells to hexadecane suggest that PA01 cells were most hydrophobic in contact with 0.1 mol L(-1) NaCl solutions. These data indicate a charge screening induced compression of the charged LPS polymers decreasing the cell-surface approach distance and increasing the cell hydrophobicity due to the greater surface predominance of the uncharged LPS polymers. Interestingly, adsorbed cell layers in 0.3 mol L(-1) NaCl had a lower IR absorption intensity, and PA01 cells suspended in 0.3 mol L(-1) were found to be more hydrophilic, indicating that other factors influence the cell-surface approach distance and hydrophobicity. The examination of cell electrophoretic mobility variation with NaCl concentration suggests that the compression of charged polysaccharides increases the polysaccharide charge density and may also reduce the flow of liquid through the polysaccharide layer affecting the effective potential at the interface, the cell hydrophobicity, and the cell-surface approach distance.

Adhesion and biofilm formation on polystyrene by drinking water-isolated bacteria

This study was performed in order to characterize the relationship between adhesion and biofilm formation abilities of drinking water-isolated bacteria (Acinetobacter calcoaceticus, Burkholderia cepacia, Methylobacterium sp., Mycobacterium mucogenicum, Sphingomonas capsulata and Staphylococcus sp.). Adhesion was assessed by two distinct methods: thermodynamic prediction of adhesion potential by quantifying hydrophobicity and the free energy of adhesion; and by microtiter plate assays. Biofilms were developed in microtiter plates for 24, 48 and 72 h. Polystyrene (PS) was used as adhesion substratum. The tested bacteria had negative surface charge and were hydrophilic. PS had negative surface charge and was hydrophobic. The free energy of adhesion between the bacteria and PS was > 0 mJ/m(2) (thermodynamic unfavorable adhesion). The thermodynamic approach was inappropriate for modelling adhesion of the tested drinking water bacteria, underestimating adhesion to PS. Only three (B. cepacia, Sph. capsulata and Staphylococcus sp.) of the six bacteria were non-adherent to PS. A. calcoaceticus, Methylobacterium sp. and M. mucogenicum were weakly adherent. This adhesion ability was correlated with the biofilm formation ability when comparing with the results of 24 h aged biofilms. Methylobacterium sp. and M. mucogenicum formed large biofilm amounts, regardless the biofilm age. Given time, all the bacteria formed biofilms; even those non-adherents produced large amounts of matured (72 h aged) biofilms. The overall results indicate that initial adhesion did not predict the ability of the tested drinking water-isolated bacteria to form a mature biofilm, suggesting that other events such as phenotypic and genetic switching during biofilm development and the production of extracellular polymeric substances (EPS), may play a significant role on biofilm formation and differentiation. This understanding of the relationship between adhesion and biofilm formation is important for the development of control strategies efficient in the early stages of biofilm development.

Theory of electrostatics and electrokinetics of soft particles

We investigate theoretically the electrostatics and electrokinetics of a soft particle, i.e. a hard particle covered with an ion-penetrable surface layer of polyelectrolytes. The electric properties of soft particles in an electrolyte solution, which differ from those of hard particles, are essentially determined by the Donnan potential in the surface layer. In particular, the Donnan potential plays an essential role in the electrostatics and electrokinetics of soft particles. Furthermore, the concept of zeta potential, which is important in the electrokinetics of hard particles, loses its physical meaning in the electrokinetics of soft particles. In this review, we discuss the potential distribution around a soft particle, the electrostatic interaction between two soft particles, and the motion of a soft particle in an electric field.