Recent Advances on the Design and Applications of Antimicrobial Nanomaterials

Present worldwide difficulties in healthcare and the environment have motivated the investigation and research of novel materials in an effort to find novel techniques to address the current challenges and requirements. In particular, the use of nanomaterials has demonstrated a significant promise in the fight against bacterial infections and the problem of antibiotic resistance. Metal nanoparticles and carbon-based nanomaterials in particular have been highlighted for their exceptional abilities to inhibit many types of bacteria and pathogens. In order for these materials to be as effective as possible, synthetic techniques are crucial. Therefore, in this review article, we highlight some recent developments in the design and synthesis of various nanomaterials, including metal nanoparticles (e.g., Ag, Zn, or Cu), metal hybrid nanomaterials, and the synthesis of multi-metallic hybrid nanostructured materials. Following that, examples of these materials' applications in antimicrobial performance targeted at eradicating multi-drug resistant bacteria, material protection such as microbiologically influenced corrosion (MIC), or additives in construction materials have been described.

Global Regulatory Roles of the Histidine-Responsive Transcriptional Repressor HutC in Pseudomonas fluorescens SBW25

HutC is known as a transcriptional repressor specific for histidine utilization (hut) genes in Gram-negative bacteria, including Pseudomonas fluorescens SBW25. However, its precise mode of protein-DNA interactions hasn't been examined with purified HutC proteins. Here, we performed electrophoretic mobility shift assay (EMSA) and DNase I footprinting using His₆-tagged HutC and biotin-labeled probe of the hut promoter (P_hutU). Results revealed a complex pattern of HutC oligomerization, and the specific protein-DNA interaction is disrupted by urocanate, a histidine derivative, in a concentration-dependent manner. Next, we searched for putative HutC-binding sites in the SBW25 genome. This led to the identification of 143 candidate targets with a P value less than 10^-4 HutC interaction with eight selected candidate sites was subsequently confirmed by EMSA analysis, including the type IV pilus assembly protein PilZ, phospholipase C (PlcC) for phosphatidylcholine hydrolyzation, and key regulators of cellular nitrogen metabolism (NtrBC and GlnE). Finally, an isogenic hutC deletion mutant was subjected to transcriptome sequencing (RNA-seq) analysis and phenotypic characterization. When bacteria were grown on succinate and histidine, hutC deletion caused upregulation of 794 genes and downregulation of 525 genes at a P value of <0.05 with a fold change cutoff of 2.0. The hutC mutant displayed an enhanced spreading motility and pyoverdine production in laboratory media, in addition to the previously reported growth defect on the surfaces of plants. Together, our data indicate that HutC plays global regulatory roles beyond histidine catabolism through low-affinity binding with operator sites located outside the hut locus.IMPORTANCE HutC in Pseudomonas is a representative member of the GntR/HutC family of transcriptional regulators, which possess a N-terminal winged helix-turn-helix (wHTH) DNA-binding domain and a C-terminal substrate-binding domain. HutC is generally known to repress expression of histidine utilization (hut) genes through binding to the P_hutU promoter with urocanate (the first intermediate of the histidine degradation pathway) as the direct inducer. Here, we first describe the detailed molecular interactions between HutC and its P_hutU target site in a plant growth-promoting bacterium, P. fluorescens SBW25, and further show that HutC possesses specific DNA-binding activities with many targets in the SBW25 genome. Subsequent RNA-seq analysis and phenotypic assays revealed an unexpected global regulatory role of HutC for successful bacterial colonization in planta.

Contact Killing of Cu-Bearing Stainless Steel Based on Charge Transfer Caused by the Microdomain Potential Difference

The addition of copper makes the Cu-bearing stainless steel (SS) possess excellent antibacterial properties. However, the antibacterial mechanism of the Cu-bearing SS is still not accurately understood and recognized. On the one hand, the concentration of released antibacterial Cu ions from its surface is insufficient to generate such an effect. On the other hand, due to the limited Cu content, the area of copper toxicity that can be contacted with bacteria is also much less than that of pure Cu. Therefore, the purpose of this study was to explore the way of bacterial inactivation caused by Cu-bearing SS from the view of the charge transfer. The results showed that the continuous and effective contact between bacteria and Cu-bearing SS is the key to induce the bacteria-killing effect so that the cathode electrons generated by the potential difference of the material microdomain can cause the proton depletion in the bacterial cells, thereby disturbing the respiratory chain and energy generation of the bacterial cells. The proton depletion reaction also catalyzed the conversion of Cu(II) into Cu(I). Cu(I) not only destroys the iron-sulfur protein but also undergoes the redox reaction with Cu(II) to produce reactive oxygen species, causing oxidative damage to cells, eventually accelerating the bacterial death.

Specific antibacterial activity of copper alloy touch surfaces in five long-term care facilities for older adults

BACKGROUND

Pathogens involved in healthcare-associated infections can quickly spread in the environment, particularly to frequently touched surfaces, which can be reservoirs for pathogens.

AIM

The purpose of this study was to investigate naturally occurring bacterial contamination on touch surfaces in five French long-term care facilities and to compare bacterial populations recovered from copper and control surfaces.

METHODS

More than 1300 surfaces were sampled. The collected bacteria were identified to obtain a global view of the cultivable bacterial populations colonizing touch surfaces. Haemolytic colonies and putative pathogens were also screened using specific agar plates and then identified with matrix-assisted laser desorption ionization time-of-flight (MALDI-TOF) mass spectrometry. In total, more than 3400 colonies were analysed.

FINDINGS

Staphylococcus and Micrococcus were the two predominant genera present on touch surfaces, respectively occurring on 51.8% and 48.0% of control surfaces. In these facilities with relatively low bioburden, copper surfaces efficiently reduced the occurrence frequencies of three genera: Staphylococcus, Streptococcus and Roseomonas. Pathogenic species such as Staphylococcus aureus, Enterococcus faecalis and E. faecium were observed in very few samples. In addition, meticillin-resistant S. aureus was observed on five control surfaces and one copper surface.

CONCLUSION

Contamination of healthcare facilities touch surfaces can be the source for the spread of bacteria through the institution. This in situ study shows that the frequency of the contamination as well as the specific bacterial population bioburden is reduced on copper alloy surfaces.

Transparent Copper-Based Antibacterial Coatings with Enhanced Efficacy against Pseudomonas aeruginosa

Bacterial surface contamination is a major cause of hospital-associated infections. Antibacterial coatings can play an important role in reducing bacterial transmission via inanimate surfaces in healthcare settings. In this work, transparent copper-based antibacterial coatings were fabricated on commercial poly(vinyl fluoride) and stainless steel. Acrylated quaternized chitosan and ethylenediaminetetraacetic acid were covalently grafted on the substrate for complexation with copper ions. The number of viable Staphylococcus aureus in a droplet [containing ∼10⁴ colony forming units (CFU)], deposited on the copper-containing coating decreased by ∼96% within 60 min at 25 °C. With Pseudomonas aeruginosa, one of the most virulent and hardest to kill bacteria, no CFU could be observed within the same time span (killing efficacy >99.8% based on the detection limit). An increase in copper release from the coating was observed in the presence of P. aeruginosa, which was postulated to be due to the proteolytic activity of P. aeruginosa. The higher efficacy of the coating against P. aeruginosa compared to S. aureus is thus attributed to this increased copper release from the coating, which resulted in extensive bacterial membrane damage and death. The copper-containing coating on poly(vinyl fluoride) retained its antibacterial efficacy after 100 wipes with a water-wetted cloth or isopropanol wipes, demonstrating its durability and long-term efficacy. The coating did not exhibit significant cytotoxicity toward mammalian fibroblasts, further demonstrating its potential for mitigating bacterial transmission in a clinical setting.

Copper Alloy Touch Surfaces in Healthcare Facilities: An Effective Solution to Prevent Bacterial Spreading

In the healthcare environment, microorganisms' cross-transmission between inanimate surfaces and patients or healthcare workers can lead to healthcare-associated infections. A recent interest has grown to create antimicrobial copper touch surfaces, in order to counteract microbial spread in the healthcare environment. For the first time, five French long-term care facilities were at 50% fitted with copper alloys door handles and handrails. Related to the environmental bacterial contamination, 1400 samples were carried out on copper and control surfaces over three years after copper installation. In addition, some copper door handles were taken from the different facilities, and their specific activity against methicillin-resistant S. aureus (MRSA) was tested in vitro. In comparison to control surfaces, copper door handles and handrails revealed significantly lower contamination levels. This difference was observed in the five long-term care facilities and it persists through the three years of the study. High and extreme levels of bacterial contamination were less frequent on copper surfaces. Although, the antibacterial activity of copper surfaces against MRSA was lowered after three years of regular use, it was still significant as compared to inert control surfaces. Therefore, copper containing surfaces are promising actors in the non-spreading of environmental bacterial contamination in healthcare facilities.

Contact killing and antimicrobial properties of copper

With the emergence of antibiotic resistance, the interest for antimicrobial agents has recently increased again in public health. Copper was recognized in 2008 by the United States Environmental Protection Agency (EPA) as the first metallic antimicrobial agent. This led to many investigations of the various properties of copper as an antibacterial, antifungal and antiviral agent. This review summarizes the latest findings about 'contact killing', the mechanism of action of copper nanoparticles and the different ways micro-organisms develop resistance to copper.