Typing by sequencing the slpA gene of Clostridium difficile strains causing multiple outbreaks in Japan

Genetic diversity and phylogenetic analysis of the surface layer protein A gene (slpA) among Clostridioides difficile clinical isolates from Tehran, Iran

Clostridioides difficile is the most common causative agent of healthcare-associated diarrhea. C. difficile strains produce a crystalline surface layer protein (SlpA), encoded by the slpA gene. Previous studies have shown that SlpA varies among C. difficile strains. In this study, we used the SlpA sequence-based typing system (SlpAST) for the molecular genotyping of C. difficile clinical isolates identified in Iran; the PCR ribotypes (RTs) and toxin profiles of the isolates were also characterized. Forty-eight C. difficile isolates were obtained from diarrheal patients, and characterized by capillary electrophoresis (CE) PCR ribotyping and the detection of toxin genes. In addition, the genetic diversity of the slpA gene was investigated by Sanger sequencing. The most common RTs were RT126 (20.8%), followed by RT001 (12.5%) and RT084 (10.4%). The intact PaLoc arrangement representing cdu2⁺/tcdR⁺/tcdB⁺/tcdE⁺/tcdA⁺/tcdC⁺/cdd3⁺ profile was the predominant pattern and cdtA and cdtB genes were found in one-third of the isolates. Using the SlpA genotyping, 12 main genotypes and 16 subtypes were identified. The SlpA type 078-1 was the most prevalent genotype (20.8%), and identified within the isolates of RT126. The yok-1, gr-1, cr-1 and kr-3 genotypes were detected in 14.5%, 12.5%, 12.5% and 8.3% of isolates, respectively. Almost all the isolates with the same RT were clustered in similar SlpA sequence types. In comparison to PCR ribotyping, SlpAST, as a simple and highly reproducible sequenced-based technique, can discriminate well between C. difficile isolates. This typing method appears to be a valuable tool for the epidemiological study of C. difficile isolates worldwide.

Isolation and characterization of a multidrug-resistant Clostridioides difficile toxinotype V from municipal wastewater treatment plant

PURPOSE

Wastewater treatment plant (WWTP) is regarded as a potential source for transmission of Clostridioides difficile from urban areas into the surface water, through feces of human and animals. The aim of this study was to screen and characterize the C. difficile bacteria in inlet and outlet wastewater of different WWTPs in Tehran, Iran.

METHODS

Totally, 72 samples were collected from three different WWTPs (inlet site and outlet sites) during a year. C. difficile was isolated and characterized in terms of toxins, toxinotype, resistance profile and genes, and colonization factors using PCR.

RESULTS

One C. difficile toxinotype V was isolated from the outlet samples. The isolate was susceptible to vancomycin but resistant to metronidazole, tetracycline, ciprofloxacin, and moxifloxacin using MIC Test Strips. The isolated C. difficile was toxigenic (tcdA, tcdB, cdtA, cdtB positive and CPE positive) and had tcdC-A genotype. No mutations were found in fliC and fliD. The slpA sequence type was 078 - 01. The C. difficile was positive for tetM, int, but negative for vanA, nim, and tndX genes. Mutations were not observed in gyrA and gyrB genes.

CONCLUSIONS

This study provided evidence of presence of a multidrug-resistant C. difficile toxinotype V in one of the municipal WWTP. The transmission of such isolate to the environment and reuse of treated wastewater by human pose a threat to human health and dissemination of antibiotic resistant bacteria which are untreatable.

Polymorphisms in the genes encoding surface associated proteins of Clostridioides difficile isolates

BACKGROUND

Although the diversity of Clostridioides difficile toxins have been extensively studied, little is known about the variation in the surface associated proteins (SAPs) which are important in early steps of bacterial colonization and infection. Here, we examined 65C. difficile isolates to identify polymorphisms in the genes encoding SAPs.

METHODS

PCR was used to amplify slpA, fliC, fliD, cwp66 and cwp84 genes, followed by sequencing. In addition, the antigenicity and immunogenicity properties of different types of SlpA, FliC, FliD, Cwp66 and Cwp84 proteins were predicted in-silico by VaxiJen and BcePred online servers.

RESULTS

The predominant slpA sequence type was gr-01 (42.37%), followed by hr-01 (11.86%) and 078-01 (10.16%). In addition, two new slpA subtypes of smz (smz-09-Ir and smz-010-Ir) and a new slpA sequence type (Ir-01) were identified among the isolates examined. Analysis of the nucleotide sequences of fliC, fliD, cwp66 and cwp84 genes revealed 7, 5,5,3 different sequence types, respectively. Insilico analysis of antigenicity of SAPs showed that FliC had the highest level of antigenicity whereas SlpA and Cwp66 proteins had the highest level of immunogenicity.

CONCLUSIONS

This study pointed to the nucleotide polymorphism in SAPs of C. difficile isolates and demonstrated noticeable diversity in antigenicity and immunogenicity of these proteins which need to be taken into consideration as promising therapeutic or vaccine targets.

In vitro antivirulence activity of baicalin against Clostridioides difficile

Introduction. Clostridioides difficile is an enteric pathogen that causes a serious toxin-mediated colitis in humans. Bacterial exotoxins and sporulation are critical virulence components that contribute to pathogenesis, and disease transmission and relapse, respectively. Therefore, reducing toxin production and sporulation could significantly minimize C. difficile pathogenicity and disease outcome in affected individuals.

Aim. This study investigated the efficacy of a natural flavone glycoside, baicalin, in reducing toxin synthesis, sporulation and spore germination in C. difficile in vitro.

Methodology. Hypervirulent C. difficile isolates BAA 1870 or 1803 were cultured in brain heart infusion broth with or without the subinhibitory concentration (SIC) of baicalin, and incubated at 37 °C for 24 h under strictly anaerobic conditions. The supernatant was harvested after 24 h for determining C. difficile toxin production by ELISA. In addition, a similar experiment was performed wherein samples were harvested for assessing total viable counts, and heat-resistant spore counts at 72 h of incubation. Furthermore, C. difficile spore germination and spore outgrowth kinetics, with or without baicalin treatment, was measured in a plate reader by recording optical density at 600 nm. Finally, the effect of baicalin on C. difficile toxin, sporulation and virulence-associated genes was investigated using real-time quantitative PCR.

Results. The SIC of baicalin significantly reduced toxin synthesis, sporulation and spore outgrowth when compared to control. In addition, C. difficile genes critical for pathogenesis were significantly down-regulated in the presence of baicalin.

Conclusion. Our results suggest that baicalin could potentially be used to control C. difficile , and warrant future studies in vivo.

Quality assurance for genotyping and resistance testing of Clostridium (Clostridioides) difficile isolates - Experiences from the first inter-laboratory ring trial in four German speaking countries

Clostridium (Clostridioides) difficile is a major cause of nosocomial diarrhoea. A first inter-laboratory ring trial was performed in four European countries to evaluate the genotyping and antibiotic susceptibility testing (AST) accuracy. Six C. difficile isolates representing the epidemiologic important ribotypes (RT), RT001, RT002, RT010, RT014, RT027, and RT078 were blinded and send to 21 participating laboratories. Participants tested the samples with their genotyping and AST methods in use for concordance with reference. A total of 21 genotyping- and 14 antimicrobial susceptibility data sets were obtained. Ribotyping (11 participants) correctly identified most RTs (median 91% concordance rate) except for RT002, which was misidentified in 4/11 reports. However, this isolate was correctly asserted to RT002 after an update of a publicly available ribotyping database. Multilocus sequence typing, surface layer sequence typing, DNA microarray based genotyping, and whole genome sequencing, which were used by 1-3 participants, identified all six isolates correctly. AST was done by epsilometry by the participants and compared to agar dilution data determined by the coordinating reference centre. Susceptibilities against metronidazole, moxifloxacin, and vancomycin were correctly identified in 235 of 237 cases and in accordance to agar dilution as the gold standard. Genotyping of the C. difficile test strains revealed a remarkable high concordance on the level of ribotypes with a wide variety of methods. Epsilometry appears to be a reliable method for AST of C. difficile isolates in routine clinical microbiology laboratories.

New class of precision antimicrobials redefines role of Clostridium difficile S-layer in virulence and viability

There is a medical need for antibacterial agents that do not damage the resident gut microbiota or promote the spread of antibiotic resistance. We recently described a prototypic precision bactericidal agent, Av-CD291.2, which selectively kills specific Clostridium difficile strains and prevents them from colonizing mice. We have since selected two Av-CD291.2-resistant mutants that have a surface (S)-layer-null phenotype due to distinct point mutations in the slpA gene. Using newly identified bacteriophage receptor binding proteins for targeting, we constructed a panel of Avidocin-CDs that kills diverse C. difficile isolates in an S-layer sequence-dependent manner. In addition to bacteriophage receptor recognition, characterization of the mutants also uncovered important roles for S-layer protein A (SlpA) in sporulation, resistance to innate immunity effectors, and toxin production. Surprisingly, S-layer-null mutants were found to persist in the hamster gut despite a complete attenuation of virulence. These findings suggest antimicrobials targeting virulence factors dispensable for fitness in the host force pathogens to trade virulence for viability and would have clear clinical advantages should resistance emerge. Given their exquisite specificity for the pathogen, Avidocin-CDs have substantial therapeutic potential for the treatment and prevention of C. difficile infections.

Characteristics and Immunological Roles of Surface Layer Proteins in Clostridium difficile

Clostridium difficile is a major causative agent of antibiotic-associated diarrhea and has become the most common pathogen of healthcare-associated infection worldwide. The pathogenesis of C. difficile infection (CDI) is mediated by many factors such as colonization involving attachment to host intestinal epithelial cells, sporulation, germination, and toxin production. Bacterial cell surface components are crucial for the interaction between the bacterium and host cells. C. difficile has two distinct surface layer proteins (SLPs): a conserved high-molecular-weight SLP and a highly variable low-molecular-weight SLP. Recent studies have shown that C. difficile SLPs play roles not only in growth and survival, but also in adhesion to host epithelial cells and induction of cytokine production. Sequence typing of the variable region of the slpA gene, which encodes SLPs, is one of the methods currently used for typing C. difficile. SLPs have received much attention in recent years as vaccine candidates and new therapeutic agents in the treatment of C. difficile-associated diseases. Gaining mechanistic insights into the molecular functions of C. difficile SLPs will help advance our understanding of CDI pathogenesis and the development of vaccines and new therapeutic approaches. In this review, we summarize the characteristics and immunological roles of SLPs in C. difficile.

Performance evaluation of the Verigene®Clostridium difficile nucleic acid test, an automated multiplex molecular testing system for detection of C. difficile toxin

The Verigene^®Clostridium difficile nucleic acid test (Verigene^® CDF test) is an automatic and rapid detection system for the genes encoding tcdA, tcdB, binary toxin, and the single nucleotide deletion at base pair 117 in the tcdC based on microarray and PCR amplification. We compared the performance of the Verigene^® CDF test to that of two enzyme immunoassays, C. DIFF QUIK CHEK COMPLETE and X/Pect Toxin A/B, using 118 specimens. We found overall concordance rates of 81.4% and 78.8% between C. DIFF QUIK CHEK COMPLETE and Verigene^® CDF test, and X/Pect Toxin A/B and Verigene^® CDF test. The Verigene^® CDF test showed the highest sensitivity (93.9%) and had a specificity of 96.5%. The sensitivity and specificity were respectively 45.5 and 94.1% for C. DIFF QUIK CHEK COMPLETE and 27.3 and 100.0% for X/Pect Toxin A/B. These results indicated that the Verigene^® CDF test was highly accurate for the detection of C. difficile toxin in fecal specimens and supported its use in daily diagnostic practice.

Synthesis of rationally designed tetrasaccharides for crystallographic and binding studies with Clostridium difficile toxins and unexpected partial N-methylations during catalytic hydrogenation of azides in methanol

A β-GlcNAc-LeX tetrasaccharides and another α-Gal-LeX analog have been synthesized for studying interaction with toxins produced by the human pathogen Clostridium difficile. LeX-based trisaccharides bearing either a 2-azidoethyl or a 6-azidohexyl aglycone have been employed in the total synthesis to afford the desired tetrasaccharides. Interestingly, during the final catalytic hydrogenation step to remove benzyl and benzylidene protecting groups and simultaneously reduce azide functionality, partial N-methylations were observed. The N-methylations appear to be a general issue with catalytic hydrogenation of azides in methanol.

Molecular Epidemiology and Antimicrobial Susceptibility of Clostridium difficile Isolates from a University Teaching Hospital in China

While the developed world has seen a significant increase in the number of scientific articles on Clostridium difficile infection (CDI), the developing world still lags behind on this subject due to limited laboratory capacity, low awareness, and limited surveillance of this problem. As such, CDI is considered a neglected but potentially huge problem in developing countries. The major aim of this study was to systemically evaluate the utility of several molecular typing tools for CDI, including their relevance in epidemiological studies in developing countries such as China. A total of 116 non-repetitive toxigenic C. difficile isolates from Chinese patients, were studied. The isolates comprised 83 (71.6%) A+B+CDT- isolates, 27 (23.3%) A-B+CDT- isolates, and 6 (5.1%) A+B+CDT+ isolates. Typing methods evaluated included multilocus variable-number tandem-repeat analysis, PCR ribotyping, multilocus sequence typing, and sequencing of slpA and tcdC genes, which identified 113, 30, 22, 18, and 8 genotypes each and exhibited discriminatory powers of 0.999, 0.916, 0.907, 0.883, and 0.765, respectively. Compared to A+B+ strains, A-B+ strains exhibited higher prevalence of drug resistance to clindamycin, erythromycin, levofloxacin, rifampicin, rifaximin, and tetracycline. Furthermore, drug resistance rates of strains with different PCR ribotypes differed, supporting the importance of molecular typing in management and control of CDI. Based on our earlier suggestion to improve the diagnostic laboratory capacity of CDI in developing countries, setting up efficient surveillance programs complemented by relevant molecular typing methods is warranted.

Molecular types and antimicrobial susceptibility patterns of Clostridium difficile isolates in different epidemiological settings in a tertiary care center in Israel

The aims of this prospective study were to examine the correlation between the molecular types and the antimicrobial susceptibility patterns of Clostridium difficile isolates with the source of acquisition and the occurrence of C. difficile infections (CDI) in a tertiary center in Israel. All available isolates from community-acquired (CA) CDI episodes (n=43) and matching numbers of isolates from community-onset, hospital acquired (CO-HA, n=67) and HA-CDI (n=56) and 32 cases of recurrent CDI were typed and tested for susceptibility to vancomycin and metronidazole. The most common types were SlpA hr-02 (21%), SlpA hr-05/PCR-ribotype-014 (12%), PCR-ribotype-027 (10%) and SlpA cr-02 (10%). The PCR-ribotype-027 was most common in the CO-HA group and the hr-05 type was more common in the CA group. Non-susceptibility to metronidazole and/or vancomycin was found in 4/7 of re-infection isolates. Our study shows that CA-CDI is uncommon and is caused by similar strains as HA-CDI, albeit with different rates.

The First Two Clostridium difficile Ribotype 027/ST1 Isolates Identified in Beijing, China-an Emerging Problem or a Neglected Threat?

Clostridium difficile hyper-virulent ribotype 027 strain has become a significant concern globally, but has rarely been reported in Asian countries including China. Recently, a retrospective single-center study in Beijing, China, detected two ribotype 027 C. difficile isolates from two patients coming for outpatient visits in 2012 and 2013. We performed a systematic investigation of the two isolates (and patients). Both C. difficile isolates had the typical PCR ribotype 027 profile; were positive for tcdA, tcdB and binary toxin genes; belonged to multilocus sequence type 1 (ST1); had typical ribotype 027 deletions in the tcdC gene; and were highly-resistant to fluoroquinolones; but had a different MLVA profile and were not genetically related to any previously reported international ribotype 027 clones. A review of the patients' medical records showed that neither received appropriate antimicrobial treatment and were lost to follow-up after outpatient visits. We propose that C. difficile infections caused by ribotype 027 are probably a neglected problem in China, and the subsequent impact of unawareness of this problem is worrying. Appropriate testing assays and multi-center or national level surveillance for C. difficile infections and specifically for ribotype 027 should be introduced to provide essential data and guide future clinical practice.

Prevalence and molecular types of Clostridium difficile isolates from faecal specimens of patients in a tertiary care centre

Clostridium difficile infection (CDI) leads to considerable morbidity and mortality among hospitalized patients. Faecal specimens from 1110 hospitalized patients suspected for CDI were cultured for isolation of C. difficile and characterization of virulence genes. PCR was carried out for toxigenic genes tcdA, tcdB, cdtA and cdtB and PCR-RFLP for fliC and slpA genes. Of 174 (15.7%) C. difficile isolates, 121 (69.5%) were toxigenic, amongst which 68 (56.2%) also had both tcdA and tcdB genes. The remaining 53 (43.8%) of the isolates also had at least one of the toxin genes. Binary toxin genes (cdtA and cdtB) with only one of the two components were present in 16 (9.2%) of the 174 isolates. The other virulence genes - fliC and slpA - were present in 100% of the isolates. The most frequent PCR-RFLP type of fliC gene was type I (n = 101), followed by type VII (n = 49) and type III (n = 24). The slpA gene presented with three combinations of patterns. Characterization of virulence genes in C. difficile isolates is of extreme importance for epidemiological surveillance and control of outbreaks owing to the capacity of this bacterium to adapt to new environmental circumstances, leading to the emergence of new epidemic strains.

Epidemiology of Clostridium difficile in Germany based on a single center long-term surveillance and German-wide genotyping of recent isolates provided to the advisory laboratory for diagnostic reasons

Epidemiology of Clostridium difficile is characterized by worldwide increase of C. difficile infections (CDI) and the emergence of new epidemic outbreak strains with the capacity for global spreading. Long-term local surveillance at the University of Saarland Medical Center between 2000 and 2013 shows that the incidence rate of laboratory-confirmed CDI was influenced by local epidemiology as well as by testing strategies. Since 2008, molecular typing of C. difficile was regularly performed for symptomatic hospitalized patients by surface-layer protein A sequence typing (slpAST), which is an established highly standardized technique for genotyping of C. difficile. The results were assigned to known ribotypes for better comparison to international data. It could be demonstrated that distribution of genotypes was different between age groups. Older patients were predominantly infected with ribotype 001 and 027, whereas ribotype 027 was not detected in the pediatric population. Molecular typing of German isolates sent to the advisory laboratory between 2011 and 2013 revealed that ribotype 027 is present with high percentages in most German regions except for the very North. In conclusion, optimized testing of all hospitalized patients with diarrhea should be generally implemented to avoid under-diagnosis of C. difficile infection. Ribotype 027 is highly prevalent in Germany, but its infections are restricted to older patients, while absent in children. Molecular typing of suspected hospital outbreaks and of patients with severe or recurrent disease may help to better understand virulence and epidemic spreading of C. difficile.

A national survey of the molecular epidemiology of Clostridium difficile in Israel: the dissemination of the ribotype 027 strain with reduced susceptibility to vancomycin and metronidazole

Our goals were to study the molecular epidemiology and antimicrobial susceptibilities of C. difficile strains in Israel. Microbiology laboratories serving 6 general hospitals (GH) and 10 long-term care facilities (LTCF) were asked to submit all stool samples in January-February 2014 that tested positive for C. difficile. Toxigenic C. difficile isolates were recovered in 208 out of 217 samples (95.8%), of which 50 (23.6%) were from LTCFs. Ribotype 027 was the most common type overall, identified in 65 samples (31.8%), and was the predominant strain in the 3 GHs with the highest incidence of C. difficile infections. Other common strains were slpA types cr-02 (n = 45) and hr-02 (n = 18). The proportions of vancomycin and metronidazole MIC values >2mg/L were high in ribotype 027 (87.7% and 44.6%, respectively) and slpA-cr-02 strains (88.8% and 17.8%, respectively). This study demonstrates that the ribotype 027 strain has disseminated across Israel and is now the most common strain.

Molecular epidemiology and antimicrobial susceptibility of Clostridium difficile isolated from a university teaching hospital in Japan

Clostridium difficile infection control strategies require an understanding of its epidemiology. In this study, we analysed the toxin genotypes of 130 non-duplicate clinical isolates of C. difficile from a university hospital in Tokyo, Japan. Multilocus sequence typing (MLST) and eBURST analysis were performed for these isolates and nine strains previously analysed by polymerase chain reaction (PCR) ribotyping. Minimum inhibitory concentrations (MICs) were determined for six antibiotics, and the bacterial resistance mechanisms were investigated. Ninety-five toxigenic strains (73%), including seven tcdA-negative, tcdB-positive and cdtA/cdtB-negative strains (A(-)B(+)CDT(-)) and three A(+)B(+)CDT(+) strains, and 35 (27%) non-toxigenic strains, were classified into 23 and 12 sequence types, respectively. Of these, sequence type (ST)17 (21.8%) was the most predominant. MLST and eBURST analysis showed that 139 strains belonged to seven groups and singletons, and most A(+)B(+)CDT(-) strains (98%, 89/91) were classified into group 1. All isolates were susceptible to metronidazole, vancomycin and meropenem; the ceftriaxone, clindamycin and ciprofloxacin resistance rates were 49, 59 and 99%, respectively. Resistance rates to ceftriaxone and clindamycin were higher in toxigenic strains than in non-toxigenic strains (P < 0.001). All ST17 and ST81 strains were resistant to these antibiotics. The clindamycin- and fluoroquinolone-resistant strains carried erm(B) and mutations in GyrA and/or GyrB, respectively. To our knowledge, this is the first MLST-based study of the molecular epidemiology of toxigenic and non-toxigenic strains in Japan, providing evidence that non-toxigenic and toxigenic strains exhibit high genetic diversity and that toxigenic strains are more likely than non-toxigenic strains to exhibit multidrug resistance.

DNA microarray-based PCR ribotyping of Clostridium difficile

This study presents a DNA microarray-based assay for fast and simple PCR ribotyping of Clostridium difficile strains. Hybridization probes were designed to query the modularly structured intergenic spacer region (ISR), which is also the template for conventional and PCR ribotyping with subsequent capillary gel electrophoresis (seq-PCR) ribotyping. The probes were derived from sequences available in GenBank as well as from theoretical ISR module combinations. A database of reference hybridization patterns was set up from a collection of 142 well-characterized C. difficile isolates representing 48 seq-PCR ribotypes. The reference hybridization patterns calculated by the arithmetic mean were compared using a similarity matrix analysis. The 48 investigated seq-PCR ribotypes revealed 27 array profiles that were clearly distinguishable. The most frequent human-pathogenic ribotypes 001, 014/020, 027, and 078/126 were discriminated by the microarray. C. difficile strains related to 078/126 (033, 045/FLI01, 078, 126, 126/FLI01, 413, 413/FLI01, 598, 620, 652, and 660) and 014/020 (014, 020, and 449) showed similar hybridization patterns, confirming their genetic relatedness, which was previously reported. A panel of 50 C. difficile field isolates was tested by seq-PCR ribotyping and the DNA microarray-based assay in parallel. Taking into account that the current version of the microarray does not discriminate some closely related seq-PCR ribotypes, all isolates were typed correctly. Moreover, seq-PCR ribotypes without reference profiles available in the database (ribotype 009 and 5 new types) were correctly recognized as new ribotypes, confirming the performance and expansion potential of the microarray.

Multiplex PCR targeting slpA: a rapid screening method to predict common Clostridium difficile ribotypes among fluoroquinolone resistant clinical strains

AIMS

Based on the relationship between Clostridium difficile surface layer protein A (slpA) sequence types (STs) and PCR-ribotypes (RTs), a multiplex polymerase chain reaction (mPCR) assay was developed to rapidly confirm C. difficile toxigenicity and, simultaneously, to identify any of five slpA STs, gr, hr, fr, gc8 and 078, that usually correspond with globally distributed RTs, 001, 014, 017, 027 and 078, respectively.

METHODS

The mPCR, containing five slpA type-specific primers, was developed using 46 well-characterised C. difficile reference strains, representing 11 slpA STs, and validated by testing 90C. difficile clinical isolates.

RESULTS

The slpA mPCR correctly identified the five slpA STs without cross-reactions. A much higher proportion of moxifloxacin resistant (32/39; 82%) than susceptible (12/51; 24%) clinical isolates were slpA typeable (χ=30.3, p<0.0001), even when RT027 isolates were excluded [10/17 (59%) versus 12/51 (24%); χ=7.3, p=0.0071<0.01]. slpA mPCR correctly predicted the RTs of all 39 isolates that belonged to the five targeted RTs.

CONCLUSION

slpA mPCR is simple, rapid and inexpensive. It can provisionally identify five globally significant, highly transmissible RTs, particularly among moxifloxacin resistant C. difficile isolates, and could be easily modified to include a broader range of slpA sequence types, based on local requirements.

Detection of nosocomial Clostridium difficile infections with toxigenic strains despite negative toxin A and B testing on stool samples

A two-step diagnostic algorithm is recommended to detect Clostridium difficile infections; however, samples are regularly found that are glutamate dehydrogenase (GDH) positive but stool toxin negative. In the present single-centre prospective study we focused on these 'difficult-to-interpret' samples and characterized them by anaerobic culture, toxigenic culture, slpA sequence typing and multiplex PCR (GenoType CDiff). The majority of stool toxin A and B-negative samples have been caused by toxigenic strains including ribotype 027. The multiplex PCR was faster and more sensitive compared with culture and allowed preliminary identification of hypervirulent strains in stool samples on the same day.

[Current data and trends on the development of antibiotic resistance of Clostridium difficile]

Clostridium difficile is the most common pathogen causing antibiotic-associated diarrhea. Antibiotic therapy also favors the development and the epidemic spreading of multiresistant strains. In this present retrospective study clinical isolates from the University of Saarland Medical Center and of other German isolate referring hospitals were characterized by genotyping and antibiotic resistance testing. The most prevalent strains were ribotypes 001 (18%), 014 (16%) and 027 (15%). Sensitivity to metronidazole and vancomycin was demonstrated for 99.7 % of the clinical isolates independent of the genotype. Of the isolates 96 % were rifampicin susceptible; however, significantly more cases of rifampicin resistance were found among 027 strains (12 %). Of the isolates 58% were clarithromycin sensitive and 57% moxifloxacin sensitive. In contrast to the various sporadic genotypes the majority of epidemic strains were macrolide or fluoroquinolone resistant (001, 027 and 078); however, discrimination between epidemic strains by antibiotic resistance profiles could not be discerned. A combination of consistent adherence to hygiene management guidelines and to a prudent and rational use of antimicrobials (antibiotic stewardship) may help to reduce the total number of C. difficile infections (CDI) and also the selection of multiresistant strains. On the other hand in the collection of isolates the sensitivity towards the standard oral antibiotic agents used for C. difficile treatment appears to be unimpaired by the global changes of C. difficile resistant profiles.

Epidemiology of Clostridium difficile infection in Asia

While Clostridium difficile infection (CDI) has come to prominence as major epidemics have occurred in North America and Europe over the recent decade, awareness and surveillance of CDI in Asia have remained poor. Limited studies performed throughout Asia indicate that CDI is also a significant nosocomial pathogen in this region, but the true prevalence of CDI remains unknown. A lack of regulated antibiotic use in many Asian countries suggests that the prevalence of CDI may be comparatively high. Molecular studies indicate that ribotypes 027 and 078, which have caused significant outbreaks in other regions of the world, are rare in Asia. However, variant toxin A-negative/toxin B-positive strains of ribotype 017 have caused epidemics across several Asian countries. Ribotype smz/018 has caused widespread disease across Japan over the last decade and more recently emerged in Korea. This review summarises current knowledge on CDI in Asian countries.

Antimicrobial resistance, toxinotype, and genotypic profiling of Clostridium difficile isolates of swine origin

The occurrence of Clostridium difficile infections in patients that do not fulfill the classical risk factors prompted us to investigate new risk factors of disease. The goal of this study was to characterize strains and associated antimicrobial resistance determinants of C. difficile isolated from swine raised in Ohio and North Carolina. Genotypic approaches used include PCR detection, toxinotyping, DNA sequencing, and pulsed-field gel electrophoresis (PFGE) DNA fingerprinting. Thirty-one percent (37/119) of isolates carried both tetM and tetW genes. The ermB gene was found in 91% of isolates that were resistant to erythromycin (68/75). Eighty-five percent (521/609) of isolates were toxin gene tcdB and tcdA positive. A total of 81% (494/609) of isolates were positive for cdtB and carry a tcdC gene (a toxin gene negative regulator) with a 39-bp deletion. Overall, 88% (196/223) of pigs carry a single C. difficile strain, while 12% (27/223) of pigs carried multiple strains. To the best of our knowledge, this is the first report of individual pigs found to carry more than one strain type of C. difficile. A significant difference in toxinotype profiles in the two geographic locations was noted, with a significantly (P < 0.001) higher prevalence of toxinotype V found in North Carolina (84%; 189/224) than in Ohio (55%; 99/181). Overall, the study findings indicate that significant proportions of C. difficile in swine are toxigenic and often are associated with antimicrobial resistance genes, although they are not resistant to drugs that are used to treat C. difficile infections.

Evaluation of automated repetitive-sequence-based PCR (DiversiLab) compared to PCR ribotyping for rapid molecular typing of community- and nosocomial-acquired Clostridium difficile

Automated repetitive PCR (rep-PCR; DiversiLab) was compared to PCR ribotyping of the 16S-23S RNA intergenic spacer of Clostridium difficile (CD) as the "gold standard" method for CD typing. PCR products were separated on DiversiLab LabChips (bioMérieux, St. Laurent, Quebec, Canada) utilizing a 2100 Bioanalyzer (Agilent Technologies, Santa Clara, CA) operating the DiversiLab v1.4 assay. Bioanalyzer data were exported to a secure DiversiLab website and analyzed with DiversiLab v3.4 software. Replicability of each method was verified by confirming that the 5 CD reference strains (RS) formed distinct clusters (CD4, CD6, VL0047, VL0013 [ribotype 027], VL0018 [ribotype 001]) by both typing methods. Ninety randomly selected clinical isolates (CS) were analyzed by both methods: 49 from community-acquired and 41 from hospital-acquired cases. A similarity index (SI) of ≥90% was used to define clusters when comparing the known RS cluster to the PCR ribotyping and rep-PCR patterns of CS. Fourteen different PCR-ribotype clusters were identified, but most CS formed 4 major clusters (i.e., CD4 [15/90; 17%], CD6 [17%], 027 [12%], and 001 [9%]). A total of 7 rep-PCR types were identified, but most CS formed 2 major rep-PCR clusters (i.e., CD4 [29/90; 32%] and CD6 [23%]); several PCR ribotypes occurred within a single rep-PCR cluster. Rep-PCR did not distinguish 027 or 001 isolates; i) 027 RS strain did not cluster, ii) eleven 027 CS strains clustered as CD4, iii) no 027 CS strains clustered with the 027 RS, and iv) only 2 001 CS clustered with the RS. Agreement between the PCR-ribotype and rep-PCR clusters only occurred for 35/90 (39%) of the CS using a rep-PCR SI of ≥90%. Rep-PCR time to results was similar, but the annual costs of routinely using this method are 32% higher than PCR ribotyping. Routine use of rep-PCR for CD typing is limited by its lack of definitive separation of the hypertoxigenic 027 or 001 outbreak CD strains.

The Clostridium difficile cell wall protein CwpV is antigenically variable between strains, but exhibits conserved aggregation-promoting function

Clostridium difficile is the main cause of antibiotic-associated diarrhea, leading to significant morbidity and mortality and putting considerable economic pressure on healthcare systems. Current knowledge of the molecular basis of pathogenesis is limited primarily to the activities and regulation of two major toxins. In contrast, little is known of mechanisms used in colonization of the enteric system. C. difficile expresses a proteinaceous array on its cell surface known as the S-layer, consisting primarily of the major S-layer protein SlpA and a family of SlpA homologues, the cell wall protein (CWP) family. CwpV is the largest member of this family and is expressed in a phase variable manner. Here we show CwpV promotes C. difficile aggregation, mediated by the C-terminal repetitive domain. This domain varies markedly between strains; five distinct repeat types were identified and were shown to be antigenically distinct. Other aspects of CwpV are, however, conserved. All CwpV types are expressed in a phase variable manner. Using targeted gene knock-out, we show that a single site-specific recombinase RecV is required for CwpV phase variation. CwpV is post-translationally cleaved at a conserved site leading to formation of a complex of cleavage products. The highly conserved N-terminus anchors the CwpV complex to the cell surface. Therefore CwpV function, regulation and processing are highly conserved across C. difficile strains, whilst the functional domain exists in at least five antigenically distinct forms. This hints at a complex evolutionary history for CwpV.

Immunomodulatory activities of surface-layer proteins obtained from epidemic and hypervirulent Clostridium difficile strains

Surface-layer proteins (SLPs) have been detected in all Clostridium difficile strains and play a role in adhesion, although an involvement in the inflammatory process may also be supposed, as they cover the bacterial surface and are immunodominant antigens. The aim of this study was to evaluate the immunomodulatory properties of SLPs obtained from hypervirulent and epidemic (H/E) or non-H/E C. difficile strains, to try to determine whether they contribute to hypervirulence. SLPs were purified from H/E PCR ribotype 027 and 001 and non-H/E PCR ribotype 012 C. difficile strains, and the ability to modulate these properties was studied in human ex vivo models of monocytes and monocyte-derived dendritic cells (MDDCs). The results indicated that SLPs were able to induce immunomodulatory cytokines [interleukin (IL)-1β, IL-6 and IL-10] in monocytes. SLPs induced maturation of MDDCs, which acquired enhanced antigen-presenting activity, a crucial function of the mature stage. SLP-primed MDDCs expressed high levels of IL-10, an important regulatory cytokine. No significant differences were found in the activation induced in monocytes and MDDCs by SLP preparations from H/E and non-H/E strains. Overall, these findings show an important role for SLPs in modulation of the immune response to C. difficile. However, SLPs from H/E strains did not show a specific immunomodulatory pattern compared with SLPs from non-H/E strains, suggesting that SLPs are not involved in the increased severity of infection peculiar to H/E strains.

Nanobiotechnology with S-layer proteins as building blocks

One of the key challenges in nanobiotechnology is the utilization of self- assembly systems, wherein molecules spontaneously associate into reproducible aggregates and supramolecular structures. In this contribution, we describe the basic principles of crystalline bacterial surface layers (S-layers) and their use as patterning elements. The broad application potential of S-layers in nanobiotechnology is based on the specific intrinsic features of the monomolecular arrays composed of identical protein or glycoprotein subunits. Most important, physicochemical properties and functional groups on the protein lattice are arranged in well-defined positions and orientations. Many applications of S-layers depend on the capability of isolated subunits to recrystallize into monomolecular arrays in suspension or on suitable surfaces (e.g., polymers, metals, silicon wafers) or interfaces (e.g., lipid films, liposomes, emulsomes). S-layers also represent a unique structural basis and patterning element for generating more complex supramolecular structures involving all major classes of biological molecules (e.g., proteins, lipids, glycans, nucleic acids, or combinations of these). Thus, S-layers fulfill key requirements as building blocks for the production of new supramolecular materials and nanoscale devices as required in molecular nanotechnology, nanobiotechnology, biomimetics, and synthetic biology.

Typing of Clostridium difficile isolates endemic in Japan by sequencing of slpA and its application to direct typing

A typing system for Clostridium difficile using sequencing of the surface-layer protein A encoding gene (slpA) was evaluated and used to analyse clinical isolates in Japan. A total of 160 stool specimens from symptomatic patients in Japan was examined and 87 C. difficile isolates were recovered. slpA sequence typing was found to have reliable typability and discriminatory power in comparison with PCR ribotyping, and the typing results were highly reproducible and comparable. slpA sequence typing was used to type C. difficile in DNA extracted directly from stool specimens. Among the 90 stool specimens in which direct typing results were obtained, 77 specimens were positive for C. difficile culture, and typing results from isolated strains agreed with those from direct typing in all 77 specimens. The slpA sequence type smz was dominant at all four hospitals examined, and this endemic type was detected by culture and/or direct typing in 61 (62 %) of 99 stool specimens positive for toxic culture and/or direct slpA sequence typing. Comparison of epidemic strains reported throughout the world revealed one isolate identified as slpA sequence type gc8, which was found to correspond to PCR ribotype 027 (BI/NAP1/027), whereas no isolates were found with the slpA gene identical to that of PCR ribotype 078 strain. slpA sequence typing is valuable for comparison of C. difficile strains epidemic in diverse areas because the typing results are reproducible and can easily be shared. In addition, slpA sequence typing could be applied to direct typing without culture.

Molecular typing methods for Clostridium difficile: pulsed-field gel electrophoresis and PCR ribotyping

Molecular typing methods for Clostridium difficile are based on gel electrophoresis of restriction fragments (endonuclease restriction analysis, REA; pulsed field gel electrophoresis PFGE; toxinotyping), PCR amplification (PCR ribotyping, arbitrarily primed PCR, multilocus variable-number tandem-repeat analysis MLVA), and sequence analysis (multilocus sequence typing MLST; slpA typing, tandem repeat sequence typing). We will describe two standard methods (PCR ribotyping predominantly used throughout Europe and PFGE which is predominantly used in North America) and will discuss the difficulties of inter-laboratory comparability and unification of typing nomenclature.

Total synthesis of Le(A)-LacNAc pentasaccharide as a ligand for Clostridium difficile toxin A

The toxins TcdA and TcdB produced by the human pathogen Clostridium difficile gain entrance to host epithelial cells by recognizing cell-surface carbohydrate ligands. Inhibiting the attachment of these toxins to host cells has been proposed to be a viable therapy to treat C. difficile infections. Glycan array screening previously revealed that the Le(A)-LacNAc pentasaccharide binds strongly to TcdA. Here we report the efficient syntheses of the pentasaccharide and a structurally related tetrasaccharide motif. These compounds will be used to better define the carbohydrate-binding specificity of toxins from C. difficile, which will hopefully lead to the development of improved therapeutics.

Characterisation of Clostridium difficile isolates by slpA and tcdC gene sequencing

The genotyping of Clostridium difficile is generally performed by the analysis of fragment- or amplification-length polymorphism by pulsed field gel electrophoresis (PFGE) or polymerase chain reaction (PCR) ribotyping. However, sequence-based methods allow typing technique standardisation and data comparison. In the present study 100 C. difficile isolates, obtained from various institutions in the state of Saarland, Germany, were prospectively analyzed by surface layer protein A single locus sequence typing (slpAST). A high proportion (52%) of isolates attributable to ribotype 027 (RT027) was found indicating that the new outbreak strain has become endemic, at least in parts of Germany. RT027 strains displayed characteristic mutations of the potential toxin repressor gene tcdC and antibiotic resistance to macrolides and fluoroquinolones. C. difficile isolates attributable to ribotypes RT001 (27%), RT014/066 (5%), RT078 (4%), to the smz genotype (3%), and to more sporadic genotypes were also identified. Overall, the prevalence of strains with resistance to macrolides or fluoroquinolones was >80%. slpAST allows the comprehensive identification of C. difficile strains by global data comparison, exemplified here by our identification of smz strains previously identified by slpAST of a Japanese outbreak. In conclusion, slpAST appears to be a powerful discriminative tool for the straightforward, standardised genotyping of C. difficile isolates.

Rapid analysis of Clostridium difficile strains recovered from hospitalized patients by using the slpA sequence typing system

Clostridium difficile is a nosocomial pathogen that is transmissible between patients via hospital staff and via contaminated environmental surfaces. Recently, a typing system based on the slpA sequence for C. difficile was developed. To elucidate the validity and efficacy of the system in the setting of a local hospital, we carried out typing of C. difficile from patients in our hospital using the system. Twenty-eight stool samples obtained from 17 patients with C. difficile-associated diarrhea were investigated. Twenty-two of the 28 samples were positive for C. difficile by stool culture, and they were able to be classified by slpA sequence typing. The smz-1 and smz-2 strains were revealed to be the predominant types in our hospital, accounting for 73% of all strains. The yok-1, yok-2, t25-1, hr-1, and hj2-2 strains were identified in 1 patient each. The smz-1 strain was identified in all wards except for ward D, while smz-2 was identified in 3 of 4 patients in ward D and was restricted to this ward. Nosocomial infection of smz-1 and smz-2 in our hospital was demonstrated. Distinguishing smz-1 from smz-2 by slpA sequence typing clarified the transmission of C. difficile among patients. In conclusion, slpA sequence typing was useful in the setting of a local hospital and may be a powerful tool for the epidemiological study of C. difficile infection.

Typing Clostridium difficile strains based on tandem repeat sequences

BACKGROUND

Genotyping of epidemic Clostridium difficile strains is necessary to track their emergence and spread. Portability of genotyping data is desirable to facilitate inter-laboratory comparisons and epidemiological studies.

RESULTS

This report presents results from a systematic screen for variation in repetitive DNA in the genome of C. difficile. We describe two tandem repeat loci, designated 'TR6' and 'TR10', which display extensive sequence variation that may be useful for sequence-based strain typing. Based on an investigation of 154 C. difficile isolates comprising 75 ribotypes, tandem repeat sequencing demonstrated excellent concordance with widely used PCR ribotyping and equal discriminatory power. Moreover, tandem repeat sequences enabled the reconstruction of the isolates' largely clonal population structure and evolutionary history.

CONCLUSION

We conclude that sequence analysis of the two repetitive loci introduced here may be highly useful for routine typing of C. difficile. Tandem repeat sequence typing resolves phylogenetic diversity to a level equivalent to PCR ribotypes. DNA sequences may be stored in databases accessible over the internet, obviating the need for the exchange of reference strains.

Comparison of molecular typing methods applied to Clostridium difficile

Since the 1980s the epidemiology of Clostridium difficile infection (CDI) has been investigated by the application of many different typing or fingerprinting methods. To study the epidemiology of CDI, a typing method with a high discriminatory power, typeability, and reproducibility is required. Molecular typing methods are generally regarded as having advantages over phenotypic methods in terms of the stability of genomic markers and providing greater levels of typeability. A growing number of molecular methods have been applied to C. difficile. For the early and rapid detection of outbreak situations, methods such as restriction enzyme analysis, arbitrary primed polymerase chain reaction (PCR), and PCR ribotyping are commonly used. For long-term epidemiology, multilocus sequence typing, multilocus variable number of tandem repeats analysis, and amplified fragment length polymorphism are of interest. Currently, the PCR-ribotyping method and the library of PCR ribotypes in Cardiff are the benchmarks to which most typing studies around the world are compared. Multilocus variable number of tandem repeats analysis is the most discriminative typing method and will contribute significantly to our understanding of the epidemiology of this important nosocomial pathogen.

Molecular analysis of Clostridium difficile at a university teaching hospital in Japan: a shift in the predominant type over a five-year period

Clostridium difficile isolates recovered from patients admitted to a teaching hospital in Japan over a 5-year period were analyzed. Two molecular typing systems, PCR ribotyping and pulsed-field gel electrophoresis (PFGE) analysis, were used. Twenty-six PCR ribotypes were found among the 148 isolates. The predominant type at our hospital appeared to shift during the study period, from PCR ribotype a in 2000 (15/33, 45%) to PCR ribotype f in 2004 (18/28, 64%). By using PFGE with thiourea added to both the gel and running buffer, all 148 Clostridium difficile isolates were successfully classified into 37 types and 61 subtypes. The PCR ribotype f isolates were further classified into four types and 11 subtypes by PFGE. The PFGE patterns of the 11 subtypes differed from each other by only 1 to 4 bands, suggesting that these differences might reflect genetic changes during patient-to-patient transmission over the 5-year period analyzed, and that PCR ribotype f isolates might be outbreak-related. In addition, the PCR ribotype f was identical to the PCR ribotype designated smz, which is reported to have caused multiple outbreaks in Japan. These results confirmed that PCR ribotype f (type smz) has specific virulence or survival factors that make it more likely to cause nosocomial outbreaks at Japanese hospitals. PCR ribotype 027, which has been reported to have caused recent outbreaks in North America and Europe, was recovered from one patient in this study; however, this strain was community-acquired. Our findings emphasize the importance of monitoring specific strains to control and prevent nosocomial infection.

Comparison of seven techniques for typing international epidemic strains of Clostridium difficile: restriction endonuclease analysis, pulsed-field gel electrophoresis, PCR-ribotyping, multilocus sequence typing, multilocus variable-number tandem-repeat analysis, amplified fragment length polymorphism, and surface layer protein A gene sequence typing

Using 42 isolates contributed by laboratories in Canada, The Netherlands, the United Kingdom, and the United States, we compared the results of analyses done with seven Clostridium difficile typing techniques: multilocus variable-number tandem-repeat analysis (MLVA), amplified fragment length polymorphism (AFLP), surface layer protein A gene sequence typing (slpAST), PCR-ribotyping, restriction endonuclease analysis (REA), multilocus sequence typing (MLST), and pulsed-field gel electrophoresis (PFGE). We assessed the discriminating ability and typeability of each technique as well as the agreement among techniques in grouping isolates by allele profile A (AP-A) through AP-F, which are defined by toxinotype, the presence of the binary toxin gene, and deletion in the tcdC gene. We found that all isolates were typeable by all techniques and that discrimination index scores for the techniques tested ranged from 0.964 to 0.631 in the following order: MLVA, REA, PFGE, slpAST, PCR-ribotyping, MLST, and AFLP. All the techniques were able to distinguish the current epidemic strain of C. difficile (BI/027/NAP1) from other strains. All of the techniques showed multiple types for AP-A (toxinotype 0, binary toxin negative, and no tcdC gene deletion). REA, slpAST, MLST, and PCR-ribotyping all included AP-B (toxinotype III, binary toxin positive, and an 18-bp deletion in tcdC) in a single group that excluded other APs. PFGE, AFLP, and MLVA grouped two, one, and two different non-AP-B isolates, respectively, with their AP-B isolates. All techniques appear to be capable of detecting outbreak strains, but only REA and MLVA showed sufficient discrimination to distinguish strains from different outbreaks.

Implications of the changing face of Clostridium difficile disease for health care practitioners

Recent reported outbreaks of Clostridium difficile-associated disease in Canada have changed the profile of C difficile infections. Historically, C difficile disease was thought of mainly as a nosocomial disease associated with broad-spectrum antibiotics, and the disease was usually not life threatening. The emergence of an epidemic strain, BI/NAP1/027, which produces a binary toxin in addition to the 2 classic C difficile toxins A and B and is resistant to some fluoroquinolones, was associated with large numbers of cases with high rates of mortality. Recently, C difficile has been reported more frequently in nonhospital-based settings, such as community-acquired cases. The C difficile disease is also being reported in populations once considered of low risk (children and young healthy women). In addition, poor response to metronidazole treatment is increasing. Faced with an increasing incidence of C difficile infections and the changing profile of patients who become infected, this paper will reexamine the current concepts on the epidemiology and treatment of C difficile-associated disease, present new hypotheses for risk factors, examine the role of spores in the transmission of C difficile, and provide recommendations that may enhance infection control practices.

Molecular characterization of Clostridium difficile clinical isolates in a geriatric hospital

The discriminatory potential of a combination of various typing methods was evaluated on a set of 21 Clostridium difficile isolates obtained from symptomatic patients hospitalized in a geriatric unit and 7 non-toxigenic isolates from the same hospital. Isolates were firstly serotyped and toxinotyped. Of the 28 isolates, 19 belonged to serogroup A. PCR-ribotyping and PCR-RFLP on the fliC and slpA genes were then applied to these 19 isolates. The results suggest that the combination of PCR-ribotyping with PCR-RFLP analysis of slpA could be more discriminatory and suitable for studying C. difficile epidemiology.

Rapid and simple method for detecting the toxin B gene of Clostridium difficile in stool specimens by loop-mediated isothermal amplification

We applied the loop-mediated isothermal amplification (LAMP) assay to the detection of the toxin B gene (tcdB) of Clostridium difficile for identification of toxin B (TcdB)-positive C. difficile strains and detection of tcdB in stool specimens. tcdB was detected in all toxin A (TcdA)-positive, TcdB-positive (A(+)B(+)) and TcdA-negative, TcdB-positive (A(-)B(+)) C. difficile strains but not from TcdA-negative, TcdB-negative strains. Of the 74 stool specimens examined, A(+)B(+) or A(-)B(+) C. difficile was recovered from 39 specimens, of which 38 specimens were LAMP positive and one was negative. Amplification was obtained in 10 specimens that were culture negative, indicating that LAMP is highly sensitive. The LAMP assay was applied to detection of tcdB in DNA extracted by a simple boiling method from 47 of those 74 specimens, which were cultured overnight in cooked-meat medium (CMM). Twenty-two of 24 culture-positive specimens were positive for LAMP on DNA from the culture in CMM. Four specimens were culture negative but positive by LAMP on DNA from CMM cultures. The LAMP assay is a reliable tool for identification of TcdB-positive C. difficile as well as for direct detection of tcdB in stool specimens with high sensitivity. Detection of tcdB by LAMP from overnight cultures in CMM could be an alternative method of diagnostic testing at clinical laboratories without special apparatus.