Disinfection and post-disinfection conditions drive bacterial and viral evolution across the environment and host

Water disinfection practices have long been established as a critical engineering intervention for controlling pathogen transmission and safeguarding individual and public health. However, recent discoveries have unveiled the significant role disinfection and post-disinfection play in accelerating the development of resistance to disinfectants and antimicrobial drugs within bacterial and viral communities in the environment. This phenomenon, in turn, may facilitate the emergence of persistent microbes and those with new genetic characteristics. These microbes may thrive in host environments with increased infectivity and resistance, posing challenges to current medical treatments and jeopardizing human health. In this perspective, we illuminate the intricate interplay between aquatic environments, microbes, and hosts and how microbial virulence evolves across the environment and host under the pressure of disinfection and post-disinfection conditions. We aim to draw attention to the previously overlooked potential risks associated with disinfection in driving the virulence evolution of bacteria and viruses, establish connections between pathogens in diverse environments and hosts within the overarching framework of the One Health concept, and ultimately provide guidelines for advancing future water disinfection technologies to effectively curb the spread of infectious diseases.

Chemical mutagenesis of Listeria monocytogenes for increased tolerance to benzalkonium chloride shows independent genetic underpinnings and off-target antibiotic resistance

Listeria monocytogenes, a potentially fatal foodborne pathogen commonly found in food processing facilities, creates a significant economic burden that totals more than $2 billion annually in the United States due to outbreaks. Quaternary ammonium compounds (QACs), including benzalkonium chloride (BAC), are among the most widely used sanitizers to inhibit the growth and spread of L. monocytogenes from food processing facilities. However, resistance to QACs has been increasing in L. monocytogenes and different genetic mechanisms conferring resistance have been discovered. Here, we used ethyl methanesulfonate (EMS) to chemically mutagenize the BAC-susceptible strain, L. monocytogenes FSL-N1-304. We isolated two mutants with increased tolerance to BAC compared to the parental strain. Next, we assessed the off-target effect of increased tolerance to BAC by measuring the minimum inhibitory concentrations (MICs) of a diverse set of antibiotics, revealing that mut-1 and mut-2 displayed significantly increased resistance to fluoroquinolone antibiotics compared to the parental strain. A hemolysis assay was then used to investigate a potential correlation between BAC tolerance and virulence. Interestingly, mut-1 and mut-2 both exhibited significantly higher hemolysis percentage than the parental strain. We then sequenced the genomes of the parental strain and both mutants to identify mutations that may be involved in the increased resistance to BAC. We identified 3 and 29 mutations in mut-1 and mut-2, respectively. mut-1 contained nonsynonymous mutations in dagK (a diacylglycerol kinase), lmo2768 (a permease-encoding gene), and lmo0186 (resuscitation promoting factor). mut-2 contained a nonsense mutation in the nucleotide excision repair enzyme UvrABC system protein B encoding gene, uvrB, which likely accounts for the higher number of mutations observed. Transcriptome analysis in the presence of BAC revealed that genes related to the phosphotransferase system and internalins were up-regulated in both mutants, suggesting their significance in the BAC stress response. These two mutants provide insights into alternative mechanisms for increased BAC tolerance and could further our understanding of how L. monocytogenes persists in the food processing environment.

The significance of environmentally bioavailable antimicrobials in driving antimicrobial resistance in soils

Antimicrobial resistance (AMR) stands as an escalating public health crisis fueled by antimicrobial residues in the environment, particularly in soil, which acts as a reservoir for antimicrobial resistance genes (ARGs). Merely quantifying the total extractable concentration of antimicrobials, instead of bioavailable fractions, may substantially underestimate their minimal selection concentration for propagating ARGs. To shed light on the role of bioavailability in ARG abundance within soil, a systematic bioavailability assessment method was established for accurately quantifying the partitioning of multi-class antimicrobials in representative Chinese soils. Microcosm studies unveiled that antimicrobials persisting in the bioavailable fraction could potentially prolong their selection pressure duration to trigger AMR. Notably, the co-occurrence of pesticide or steroid hormone influenced the development trends of ARG subtypes, with fluoroquinolone resistance genes (RGs) being particularly susceptible. Partial least squares path model (PLS-PM) analysis uncovered potentially distinct induction mechanisms of antimicrobials: observable results suggested that extractable residual concentration may exert a direct selection pressure on the development of ARGs, while bioavailable concentration could potentially play a stepwise role in affecting the abundance of mobile genetic elements and initiating ARG dissemination. Such unprecedented scrutinization of the interplay between bioavailable antimicrobials in soils and ARG abundance provides valuable insights into strategizing regulatory policy or guidelines for soil remediation.

Multi-species biofilms of environmental microbiota isolated from fruit packing facilities promoted tolerance of Listeria monocytogenes to benzalkonium chloride

Listeria monocytogenes may survive and persist in food processing environments due to formation of complex multi-species biofilms of environmental microbiota that co-exists in these environments. This study aimed to determine the effect of selected environmental microbiota on biofilm formation and tolerance of L. monocytogenes to benzalkonium chloride in formed biofilms. The studied microbiota included bacterial families previously shown to co-occur with L. monocytogenes in tree fruit packing facilities, including Pseudomonadaceae, Xanthomonadaceae, Microbacteriaceae, and Flavobacteriaceae. Biofilm formation ability and the effect of formed biofilms on the tolerance of L. monocytogenes to benzalkonium chloride was measured in single- and multi-family assemblages. Biofilms were grown statically on polystyrene pegs submerged in a R2A broth. Biofilm formation was quantified using a crystal violet assay, spread-plating, confocal laser scanning microscopy, and its composition was assessed using amplicon sequencing. The concentration of L. monocytogenes in biofilms was determined using the most probable number method. Biofilms were exposed to the sanitizer benzalkonium chloride, and the death kinetics of L. monocytogenes were quantified using a most probable number method. A total of 8, 8, 6, and 3 strains of Pseudomonadaceae, Xanthomonadaceae, Microbacteriaceae, and Flavobacteriaceae, respectively, were isolated from the environmental microbiota of tree fruit packing facilities and were used in this study. Biofilms formed by Pseudomonadaceae, Xanthomonadaceae, and all multi-family assemblages had significantly higher concentration of bacteria, as well as L. monocytogenes, compared to biofilms formed by L. monocytogenes alone. Furthermore, multi-family assemblage biofilms increased the tolerance of L. monocytogenes to benzalkonium chloride compared to L. monocytogenes mono-species biofilms and planktonic multi-family assemblages. These findings suggest that L. monocytogenes control strategies should focus not only on assessing the efficacy of sanitizers against L. monocytogenes, but also against biofilm-forming microorganisms that reside in the food processing built environment, such as Pseudomonadaceae or Xanthomonadaceae.

NaClO Co-selects antibiotic and disinfectant resistance in Klebsiella pneumonia: Implications for the potential risk of extensive disinfectant use during COVID-19 pandemic

The inappropriate use of antibiotics is widely recognized as the primary driver of bacterial antibiotic resistance. However, less attention has been given to the potential induction of multidrug-resistant bacteria through exposure to disinfectants. In this study, Klebsiella pneumonia, an opportunistic pathogen commonly associated with hospital and community-acquired infection, was experimentally exposed to NaClO at both minimum inhibitory concentration (MIC) and sub-MIC levels over a period of 60 days. The result demonstrated that NaClO exposure led to enhanced resistance of K. pneumonia to both NaClO itself and five antibiotics (erythromycin, polymyxin B, gentamicin, tetracycline, and ciprofloxacin). Concurrently, the evolved resistant strains exhibited fitness costs, as evidenced by decreased growth rates. Whole population sequencing revealed that both concentrations of NaClO exposure caused genetic mutations in the genome of K. pneumonia. Some of these mutations were known to be associated with antibiotic resistance, while others had not previously been identified as such. In addition, 11 identified mutations were located in the virulence factors, demonstrating that NaClO exposure may also impact the pathogenicity of K. pneumoniae. Overall, this study highlights the potential for the widespread use of NaClO-containing disinfectants during the COVID-19 pandemic to contribute to the emergence of antibiotic-resistant bacteria. ENVIRONMENTAL IMPLICATION: Considering the potential hazardous effects of disinfectant residues on environment, organisms and biodiversity, the sharp rise in use of disinfectants during COVID-19 pandemic has been considered highly likely to cause worldwide secondary disasters in ecosystems and human health. This study demonstrated that NaClO exposure enhanced the resistance of K. pneumonia to both NaClO and five antibiotics (erythromycin, polymyxin B, gentamicin, tetracycline, and ciprofloxacin), highlighting the widespread use of NaClO-containing disinfectants during the COVID-19 pandemic may increase the emergence of antibiotic-resistant bacteria in the environment.

From "resistance genes expression" to "horizontal migration" as well as over secretion of Extracellular Polymeric Substances: Sludge microorganism's response to the increasing of long-term disinfectant stress

Glutaraldehyde-Didecyldimethylammonium bromides (GDs) has been frequently and widely employed in livestock and poultry breeding farms to avoid epidemics such as African swine fever, but its long-term effect on the active sludge microorganisms of the receiving wastewater treatment plant was keep unclear. Four simulation systems were built here to explore the performance of aerobic activated sludge with the long-term exposure of GDs and its mechanism by analyzing water qualities, resistance genes, extracellular polymeric substances and microbial community structure. The results showed that the removal rates of CODCr and ammonia nitrogen decreased with the exposure concentration of GDs increasing. It is worth noting that long-term exposure to GDs can induce the horizontal transfer and coordinated expression of a large number of resistance genes, such as qacE, sul1, tetx, and int1, in drug-resistant microorganisms. Additionally, it promotes the secretion of more extracellular proteins, including arginine, forming a "barrier-like" protection. Therefore, long-term exposure to disinfectants can alter the treatment capacity of activated sludge receiving systems, and the abundance of resistance genes generated through horizontal transfer and coordinated expression by drug-resistant microorganisms does pose a significant threat to ecosystems and health. It is recommended to develop effective pretreatment methods to eliminate disinfectants.

Microbial biofilm metabolization of benzalkonium compounds (benzyl dimethyl dodecyl ammonium & benzyl dimethyl tetradecyl ammonium chloride)

Benzalkonium chlorides (BACs) are quaternary ammonium compounds (QUATs) that are used as biocides. The degradation of these compounds in wastewater treatment plants is essential to reduce their spread into the environment and thus prevent the development of QUAT-resistant genes. The biodegradation of two BACs (BAC-12 and BAC-14) was investigated in moving bed biofilm reactors (MBBRs). Degradation half-lives of 12 and 20 h for BAC-12 and - 14, respectively, were detected as well as the formation of 42 metabolites. Two new degradation pathways for the BACs were identified in this study: 1) one involving an ω-oxidation, followed by β-oxidation and 2) one via an ω-oxidation followed by an α-oxidation that was succeeded by β-oxidation. Similar metabolites were detected for both BAC-12 and BAC-14. Additional metabolites were detected in the study, that could not be assigned to the above-mentioned pathways, revealing even more metabolic pathways in the MBBR which is probably due to the complexity of the microbial community in the biofilm. Interestingly, both TP194 (Benzyl-(carboxymethyl)-dimethylazanium) and TP208B (Benzyl-(2-carboxyethyl)-dimethylazanium) were identified as end products of the ω/β-pathway and the α/β-pathway. TP208B, TP152 and TP250 that were identified in this study, as well as the known BDMA were discovered in the effluent of a wastewater treatment plant.

Disinfectants and antiseptics: mechanisms of action and resistance

Chemical biocides are used for the prevention and control of infection in health care, targeted home hygiene or controlling microbial contamination for various industrial processes including but not limited to food, water and petroleum. However, their use has substantially increased since the implementation of programmes to control outbreaks of methicillin-resistant Staphylococcus aureus, Clostridioides difficile and severe acute respiratory syndrome coronavirus 2. Biocides interact with multiple targets on the bacterial cells. The number of targets affected and the severity of damage will result in an irreversible bactericidal effect or a reversible bacteriostatic one. Most biocides primarily target the cytoplasmic membrane and enzymes, although the specific bactericidal mechanisms vary among different biocide chemistries. Inappropriate usage or low concentrations of a biocide may act as a stressor while not killing bacterial pathogens, potentially leading to antimicrobial resistance. Biocides can also promote the transfer of antimicrobial resistance genes. In this Review, we explore our current understanding of the mechanisms of action of biocides, the bacterial resistance mechanisms encompassing both intrinsic and acquired resistance and the influence of bacterial biofilms on resistance. We also consider the impact of bacteria that survive biocide exposure in environmental and clinical contexts.

Effects of environmental disinfection on microbial population and resistance genes: A case study of the microecology within a panda enclosure

Widespread use of disinfectants raises concerns over their involvement in altering microbial communities and promoting antimicrobial resistance. This study explores the influence of disinfection protocols on microbial populations and resistance genes within an isolated enclosure environment and in the gut of giant pandas (GPs) held within. Samples of panda feces, air conditioning ducts, soil and bamboo were collected before and after disinfection. High-throughput sequencing characterized the microbial flora of GP gut and environmental microbes inside the artificial habitat. Microbial cultures showed that Escherichia coli (34.6%), Enterococcus (15.4%) and other pathogenic bacteria deposited in feces and the enclosure. Isolates exhibit a consistent resistance to disinfectant, with the greatest resistance shown to cyanuric acid, and the lowest to glutaraldehyde-dodecyl dimethyl ammonium bromide (GD-DDAB) and dodecyl dimethyl ammonium bromide (DDAB). The total number of the culturable bacteria in soil and bamboo were significantly diminished after disinfection but increased in the gut. After disinfection, the richness (Chao1 index) of environment samples increased significantly (P < 0.05), while the richness in gut decreased significantly (P < 0.05). Ten genera showed significant change in feces after disinfection. Metagenome sequencing showed that 126 types of virulence genes were present in feces before disinfection and 37 in soil. After disinfection, 110 virulence genes localized in feces and 53 in soil. Eleven virulence genes including ECP and T2SS increased in feces. A total of 182 antibiotic resistance genes (ARGs) subtypes, potentially conferring resistance to 20 classes of drugs, were detected in the soils and feces, with most belonging to efflux pump protein pathways. After disinfection, the number of resistance genes increased both in gut and soil, which suggests disinfection protocols increase the number of resistance pathways. Our study shows that the use of disinfectants helps to shape the microbial community of GPs and their habitat, and increases populations of resistant strain bacteria.

Biocides in the Hospital Environment: Application and Tolerance Development

Hospital-acquired infections are a rising problem with consequences for patients, hospitals, and health care workers. Biocides can be employed to prevent these infections, contributing to eliminate or reduce microorganisms' concentrations at the hospital environment. These antimicrobials belong to several groups, each with distinct characteristics that need to be taken into account in their selection for specific applications. Moreover, their activity is influenced by many factors, such as compound concentration and the presence of organic matter. This article aims to review some of the chemical biocides available for hospital infection control, as well as the main factors that influence their efficacy and promote susceptibility decreases, with the purpose to contribute for reducing misusage and consequently for preventing the development of resistance to these antimicrobials.

Exposure of Salmonella enterica serovar 1,4,[5],12:i:- to benzalkonium chloride leads to acquired resistance to this disinfectant and antibiotics

AIMS

Disinfectants such as benzalkonium chloride (BC), extensively used in animal farms and food-processing industries, contribute to the development of adaptive and cross-resistance in foodborne pathogens, posing a serious threat to food safety and human health. The purpose of this study is to explore whether continuous exposure of Salmonella enterica serovar 1,4,[5],12:i:- (S. 1,4,[5],12:i:-) to sublethal concentrations of BC could result in acquired resistance to this agent and other environmental stresses (e.g. antibiotics, heat, and acid).

METHODS AND RESULTS

BC tolerance increased in all tested strains after exposure to gradually increasing concentrations of BC, with increases in minimum inhibitory concentrations between two and sixfold. The survival rate of BC-adapted strains was significantly (P < 0.05) higher than that of their wild-type (non-adapted) counterparts in lethal concentrations of BC. In addition, significant reductions (P < 0.05) in zeta potential were observed in BC-adapted strains compared to wild-type ones, indicating that a reduction in cell surface charge was a cause of adaptative resistance. More importantly, two BC-adapted strains exhibited increased antibiotic resistance to levofloxacin, ceftazidime, and tigecycline, while gene mutations (gyrA, parC) and antibiotic efflux-related genes (acrB, mdsA, mdsB) were detected by genomic sequencing analysis. Moreover, the tolerance of BC-adapted strains to heat (50, 55, and 60°C) and acid (pH 2.0, 2.5) was strain-dependent and condition-dependent.

CONCLUSIONS

Repeated exposure to sublethal concentrations of BC could result in the emergence of BC- and antibiotic-resistant S. 1,4,[5],12:i:- strains.

Antibiotic, Heavy Metal, and Biocide Concentrations in a Wastewater Treatment Plant and Its Receiving Water Body Exceed PNEC Limits: Potential for Antimicrobial Resistance Selective Pressure

Although the rise in antimicrobial resistance has been attributed mainly to the extensive and indiscriminate use of antimicrobials such as antibiotics and biocides in humans, animals and on plants, studies investigating the impact of this use on water environments in Africa are minimal. This study quantified selected antibiotics, heavy metals, and biocides in an urban wastewater treatment plant (WWTP) and its receiving water body in Kwazulu-Natal, South Africa, in the context of the predicted no-effect concentrations (PNEC) for the selection of antimicrobial resistance (AMR). Water samples were collected from the WWTP effluent discharge point and upstream and downstream from this point. Heavy metals were identified and quantified using the United States Environmental Protection Agency (US EPA) method 200.7. Biocides and antibiotic residues were determined using validated ultra-high-performance liquid chromatography with tandem mass spectrometry-based methods. The overall highest mean antibiotic, metal and biocide concentrations were observed for sulfamethoxazole (286.180 µg/L), neodymium (Nd; 27.734 mg/L), and benzalkonium chloride (BAC 12) (7.805 µg/L), respectively. In decreasing order per sampling site, the pollutant concentrations were effluent > downstream > upstream. This implies that the WWTP significantly contributed to the observed pollution in the receiving water. Furthermore, most of the pollutants measured recorded values exceeding the recommended predicted no-effect concentration (PNEC) values, suggesting that the microbes in such water environments were at risk of developing resistance due to the selection pressure exerted by these antimicrobials. Further studies are required to establish such a relationship.

Mechanisms of Antibiotic and Biocide Resistance That Contribute to Pseudomonas aeruginosa Persistence in the Hospital Environment

Pseudomonas aeruginosa is an opportunistic bacterial pathogen responsible for multiple hospital- and community-acquired infections, both in human and veterinary medicine. P. aeruginosa persistence in clinical settings is worrisome and is a result of its remarkable flexibility and adaptability. This species exhibits several characteristics that allow it to thrive under different environmental conditions, including the ability to colonize inert materials such as medical equipment and hospital surfaces. P. aeruginosa presents several intrinsic mechanisms of defense that allow it to survive external aggressions, but it is also able to develop strategies and evolve into multiple phenotypes to persevere, which include antimicrobial-tolerant strains, persister cells, and biofilms. Currently, these emergent pathogenic strains are a worldwide problem and a major concern. Biocides are frequently used as a complementary/combination strategy to control the dissemination of P. aeruginosa-resistant strains; however, tolerance to commonly used biocides has also already been reported, representing an impediment to the effective elimination of this important pathogen from clinical settings. This review focuses on the characteristics of P. aeruginosa responsible for its persistence in hospital environments, including those associated with its antibiotic and biocide resistance ability.

Quaternary ammonium disinfectants and antiseptics: tolerance, resistance and potential impact on antibiotic resistance

BACKGROUND

Due to the substantial increase in the use of disinfectants containing quaternary ammonion compounds (QACs) in healthcare and community settings during the COVID-19 pandemic, there is increased concern that heavy use might cause bacteria to develop resistance to QACs or contribute to antibiotic resistance. The purpose of this review is to briefly discuss the mechanisms of QAC tolerance and resistance, laboratory-based evidence of tolerance and resistance, their occurrence in healthcare and other real-world settings, and the possible impact of QAC use on antibiotic resistance.

METHODS

A literature search was conducted using the PubMed database. The search was limited to English language articles dealing with tolerance or resistance to QACs present in disinfectants or antiseptics, and potential impact on antibiotic resistance. The review covered the period from 2000 to mid-Jan 2023.

RESULTS

Mechanisms of QAC tolerance or resistance include innate bacterial cell wall structure, changes in cell membrane structure and function, efflux pumps, biofilm formation, and QAC degradation. In vitro studies have helped elucidate how bacteria can develop tolerance or resistance to QACs and antibiotics. While relatively uncommon, multiple episodes of contaminated in-use disinfectants and antiseptics, which are often due to inappropriate use of products, have caused outbreaks of healthcare-associated infections. Several studies have identified a correlation between benzalkonium chloride (BAC) tolerance and clinically-defined antibiotic resistance. The occurrence of mobile genetic determinants carrying multiple genes that encode for QAC or antibiotic tolerance raises the concern that widespread QAC use might facilitate the emergence of antibiotic resistance. Despite some evidence from laboratory-based studies, there is insufficient evidence in real-world settings to conclude that frequent use of QAC disinfectants and antiseptics has promoted widespread emergence of antibiotic resistance.

CONCLUSIONS

Laboratory studies have identified multiple mechanisms by which bacteria can develop tolerance or resistance to QACs and antibiotics. De novo development of tolerance or resistance in real-world settings is uncommon. Increased attention to proper use of disinfectants is needed to prevent contamination of QAC disinfectants. Additional research is needed to answer many questions and concerns related to use of QAC disinfectants and their potential impact on antibiotic resistance.

Quaternary ammonium compounds of emerging concern: Classification, occurrence, fate, toxicity and antimicrobial resistance

Amplified hygiene and precautionary measures are of utmost importance to control the spread of COVID-19 and future infection; however, these changes in practice are projected to trigger a rise in the purchase, utilisation and hence, discharge of many disinfectants into the environment. While alcohol-based, hydrogen peroxide-based, and chlorine-based compounds have been used widely, quaternary ammonium compounds (QACs) based disinfectants are of significant concern due to their overuse during this pandemic. This review presents the classification of disinfectants and their mechanism of action, focusing on QACs. Most importantly, the occurrence, fate, toxicity and antimicrobial resistance due to QACs are covered in this paper. Here we collated evidence from multiple studies and found rising trends of concern, including an increase in the mass load of QACs at a wastewater treatment plant (WWTP) by 331% compared to before the COVID-19 pandemic, as well as an increases in the concentration of 62% in residential dust, resulting in high concentrations of QACs in human blood and breast milk and suggesting that these could be potential sources of persistent QACs in infants. In addition to increased toxicity to human and aquatic life, increased use of QACs and accelerated use of antibiotics and antimicrobials during the COVID-19 pandemic could multiply the threat to antimicrobial resistance.

Quaternary ammonium compounds promoted anoxic sludge granulation and altered propagation risk of intracellular and extracellular antibiotic resistance genes

Surfactants could influence sludge morphology and disinfectants were linked to antibiotic resistance genes (ARGs). Thus, the response of activated sludge and ARGs to long-term quaternary ammonium compounds (QACs) exposure required further investigation, which is a popular surfactant and disinfectant. Here, three sequencing batch reactors were fed with 5 mg/L most frequently detected QACs (dodecyl trimethyl ammonium chloride (ATMAC C12), dodecyl benzyl dimethyl ammonium chloride (BAC C12) and didodecyl dimethyl ammonium chloride (DADMAC C12)) for 180 d. The long-term inhibitory effect on denitrification ranked: DADMAC C12 > BAC C12 > ATMAC C12. Besides, obvious granular sludge promoted by the increase of α-Helix/(β-Sheet + Random coil) appeared in DADMAC C12 system. Moreover, intracellular ARGs increased when denitrification systems encountered QACs acutely but decreased in systems chronically exposed to QACs. Although replication and repair metabolism in ATMAC C12 system was higher, ATMAC C12 significantly promoted proliferation of extracellular ARGs. It was noteworthy that the propagation risk of extracellular ARGs in sludge increased significantly during sludge granulation process, and intracellular sul2 genes in sludge and water both increased with the granular diameter in DADMAC C12 system. The universal utilization of QACs may enhance antibiotic resistance of bacteria in wastewater treatment plants, deserving more attention.

The effect of disinfectants and antiseptics on co- and cross-selection of resistance to antibiotics in aquatic environments and wastewater treatment plants

The outbreak of the SARS-CoV-2 pandemic led to increased use of disinfectants and antiseptics (DAs), resulting in higher concentrations of these compounds in wastewaters, wastewater treatment plant (WWTP) effluents and receiving water bodies. Their constant presence in water bodies may lead to development and acquisition of resistance against the DAs. In addition, they may also promote antibiotic resistance (AR) due to cross- and co-selection of AR among bacteria that are exposed to the DAs, which is a highly important issue with regards to human and environmental health. This review addresses this issue and provides an overview of DAs structure together with their modes of action against microorganisms. Relevant examples of the most effective treatment techniques to increase the DAs removal efficiency from wastewater are discussed. Moreover, insight on the resistance mechanisms to DAs and the mechanism of DAs enhancement of cross- and co-selection of ARs are presented. Furthermore, this review discusses the impact of DAs on resistance against antibiotics, the occurrence of DAs in aquatic systems, and DA removal mechanisms in WWTPs, which in principle serve as the final barrier before releasing these compounds into the receiving environment. By recognition of important research gaps, research needs to determine the impact of the majority of DAs in WWTPs and the consequences of their presence and spread of antibiotic resistance were identified.

Contribution of RND-Type Efflux Pumps in Reduced Susceptibility to Biocides in Acinetobacter baumannii

Bacterial efflux pumps are among the key mechanisms of resistance against antibiotics and biocides. We investigated whether differential expression levels of the RND-type efflux pumps AdeABC and AdeIJK impacted the susceptibility to commonly used biocides in multidrug-resistant Acinetobacter baumannii. Susceptibility testing and time-kill assays of defined laboratory and clinical A. baumannii strains with different levels of efflux pump expression were performed after exposure to the biocides benzalkonium chloride, chlorhexidine digluconate, ethanol, glucoprotamin, octenidine dihydrochloride, and triclosan. While the impact of efflux pump expression on susceptibility to the biocides was limited, noticeable differences were found in kill curves, where AdeABC expression correlated with greater survival after exposure to benzalkonium chloride, chlorhexidine digluconate, glucoprotamin, and octenidine dihydrochloride. AdeABC expression levels did not impact kill kinetics with ethanol nor triclosan. In conclusion, these data indicate that the overexpression of the RND-type efflux pumps AdeABC and AdeIJK contributes to the survival of A. baumannii when exposed to residual concentrations of biocides.

Efflux-mediated tolerance to cationic biocides, a cause for concern?

AbstractWith an increase in the number of isolates resistant to multiple antibiotics, infection control has become increasingly important to help combat the spread of multi-drug-resistant pathogens. An important component of this is through the use of disinfectants and antiseptics (biocides). Antibiotic resistance has been well studied in bacteria, but little is known about potential biocide resistance genes and there have been few reported outbreaks in hospitals resulting from a breakdown in biocide effectiveness. Development of increased tolerance to biocides has been thought to be more difficult due to the mode of action of biocides which affect multiple cellular targets compared with antibiotics. Very few genes which contribute towards increased biocide tolerance have been identified. However, the majority of those that have are components or regulators of different efflux pumps or genes which modulate membrane function/modification. This review will examine the role of efflux in increased tolerance towards biocides, focusing on cationic biocides and heavy metals against Gram-negative bacteria. As many efflux pumps which are upregulated by biocide presence also contribute towards an antimicrobial resistance phenotype, the role of these efflux pumps in cross-resistance to both other biocides and antibiotics will be explored.

Short-Term Benzalkonium Chloride (C12) Exposure Induced the Occurrence of Wide-Spectrum Antibiotic Resistance in Agricultural Soils

Antibiotic resistance genes (ARGs) are global pollutants that pose a potential risk to human health. Benzalkonium chloride (C₁₂) (BC) disinfectants are thought to exert selection pressure on antibiotic resistance. However, evidence of BC-induced changes in antibiotic resistance in the soil environment is lacking. Here, we established short-term soil microcosms to investigate ARG profile dynamics in agricultural soils amended with sulfamethazine (SMZ, 10 mg kg^-1) and gradient concentrations of BC (0-100 mg kg^-1), using high-throughput quantitative PCR and Illumina sequencing. With the increase in BC concentration, the number of ARGs detected in the soil increased, but the normalized ARG abundance decreased. The added SMZ had a limited impact on ARG profiles. Compared to broad-spectrum fungicidal BC, the specificity of SMZ significantly affected the microbial community. Network analysis found that low-medium BC exposure concentrations resulted in the formation of small but strong ARG co-occurrence clusters in the soil, while high BC exposure concentration led to a higher incidence of ARGs. Variation partitioning analysis suggested that BC stress was the major driver shaping the ARG profile. Overall, this study highlighted the emergence and spread of BC-induced ARGs, potentially leading to the antimicrobial resistance problem in agricultural soils.

N-chlorosuccinimide enhancing the antimicrobial effect of benzalkonium chloride on biofilm Pseudomonas aeruginosa and its interaction mechanisms

This study investigated the influence of N-chlorosuccinimide (NCS) pretreatment on the antimicrobial effect of benzalkonium chloride (BZC, representative of QACs) against biofilm bacteria and its mechanisms. Results show that 0.04 - 0.07 mmol/L NCS pretreatment significantly increased the antimicrobial efficacy of 0.03 mmol/L BZC on biofilm cells by 30% - 70%. The main mechanisms involved membrane permeability, oxidative damage, and metabolic disorder. More precisely, NCS pretreatment increased the permeability of bacteria and reduced the activity of the electron transport system (ETS) and dehydrogenase (DHA). At the same time, the oxidative damage of both endogenous and exogenous ROS and the disorder of the antioxidant enzymes (superoxide dismutase and catalase) further improved their combined antibacterial ability. Moreover, NCS pretreatment greatly reduced the resistance of biofilm Pseudomonas aeruginosa to BZC. The findings of the study provide a new method to effectively enhance the antimicrobial efficiency of quaternary ammonium cationic surfactants (e.g., BZC) and reduce bacterial resistance, as well as a scientific guidance for the development of new antimicrobial products.

Effect of cetyltrimethylammonium chloride on various Escherichia coli strains and their inactivation kinetics by ozone and monochloramine

Cethyltrimethylammonium chloride (CTMA) is one of the most used quaternary ammonium compounds (QACs) in consumer products. CTMA and other QACs are only partially eliminated in municipal wastewater treatment and they can interact with bacteria in biological processes. Currently, there is only limited information on the antimicrobial efficiency of CTMA in matrices other than standard growth media and if and how CTMA influences conventional chemical disinfection. The results obtained in this study showed that the susceptibility of E. coli to CTMA was significantly enhanced in phosphate-buffered saline, lake water and wastewater compared to broth. In broth, a minimum inhibitory concentration (MIC) of CTMA of 20 mgL^-1 was observed for E. coli, whereas a 4-log inactivation occurred for CTMA concentrations of about 4 mgL^-1 in buffered ultra-purified water, a lake water and wastewater effluent. The impacts of the pre-exposure and the presence of CTMA on inactivation by ozone and monochloramine were tested with three different E. coli strains: AG100 with the efflux pump acrAB intact, AG100A with it deleted and AG100tet with it overexpressed. Pre-exposure of E. coli AG100 to CTMA led to an increased susceptibility for ozone with second-order inactivation rate constants (∼ 10⁶ M^-1s^-1) increasing by a factor of about 1.5. An opposite trend was observed for monochloramine with second-order inactivation rate constants (∼ 10³ M^-1s^-1) decreasing by a factor of about 2. For E. coli AG100tet, the second-order inactivation rate constant decreased by a factor of almost 2 and increased by a factor of about 1.5 for ozone and monochloramine, respectively, relative to the strain AG100. The simultaneous presence of CTMA and ozone enhanced the second-order inactivation rate constants for CTMA concentrations of 2.5 mgL^-1 by a factor of about 3. For monochloramine also an enhancement of the inactivation was observed, which was at least additive but might also be synergistic. Enhancement by factors from about 2 to 4.5 were observed for CTMA concentrations > 2.5 mgL^-1.

Priming with biocides: a pathway to antibiotic resistance?

AIMS

To investigate the priming effects of sub-inhibitory concentrations of biocides on antibiotic resistance in bacteria.

METHODS AND RESULTS

Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus were exposed to sub-inhibitory concentrations of biocides via a gradient plate method. Minimum inhibitory concentration (MIC) and antibiotic susceptibility were determined, and efflux pump inhibitors (thioridazine and chlorpromazine) were used to investigate antibiotic resistance mechanism(s). Escherichia coli displayed a 2-fold increase in MIC (32 to 64 mg l-1) to H₂ O₂ which was stable after 15 passages, but lost after 6 weeks, and P. aeruginosa displayed a 2-fold increase in MIC (64 to 128 mg l-1) to BZK which was also stable for 15 passages. There were no other tolerances observed to biocides in E. coli, P. aeruginosa or S. aureus, however stable cross-resistance to antibiotics was observed in the absence of a stable increased tolerance to biocides. Six-fold increases in MIC to cephalothin and four-fold to ceftriaxone and ampicillin were observed in hydrogen peroxide primed E. coli. Chlorhexidine primed S. aureus showed a four-fold increase in MIC to oxacillin, and glutaraldehyde-primed P. aeruginosa showed four-fold (sulphatriad) and eight-fold (ciprofloxacin) increases in MIC. Thioridazine increased the susceptibility of E. coli to cephalothin and cefoxitin by four and two-fold respectively, and both thioridazine and chlorpromazine increased the susceptibility S. aureus to oxacillin by eight and four-fold respectively.

CONCLUSIONS

These findings demonstrate that sub-inhibitory concentrations of biocides can prime bacteria to become resistant to antibiotics even in the absence of stable biocide tolerance and suggests activation of efflux mechanisms may be a contributory factor.

SIGNIFICANCE AND IMPACT OF THE STUDY

This study demonstrates the effects of low-level exposure of biocides (priming) on antibiotic resistance even in the absence of obvious increased biocidal tolerance.

Resisting disinfectants

van Dijk et al. discuss the potential for antimicrobial resistance as a consequence of disinfectant use. The authors advocate for the prudent use of disinfectants in all sectors of society.

The effect of disinfectants on the microbial community on environmental healthcare surfaces using next generation sequencing

BACKGROUND

Healthcare-associated infections are a significant economic burden and cause of avoidable morbidity and mortality within healthcare systems. The contribution of environmental contamination to healthcare-associated infection transmission has been recognized, but the mechanisms by which transmission occurs are still being investigated. The objective of this study was to characterize the microbial communities of disinfected, non-critical healthcare surfaces using next generation sequencing technology.

METHODS

Composite environmental surface samples were from high-touch surfaces in rooms of patients isolated for infections with multidrug-resistant organisms during their hospitalization. Information on the disinfectant product used and cleaning type (routine or terminal) was collected. 16S rRNA gene amplicon sequencing and analysis were performed. Community analysis was conducted to determine the bacterial composition and compare the detection of target pathogens by culture from 94 Contact Precaution rooms.

RESULTS

Overall percent agreement between culture and sequence methods ranged from 52%-88%. A significant difference was observed in bacterial composition between rooms cleaned with bleach and those cleaned with a quaternary ammonium compound for composite 2 (overbed table, intravenous pole, and inner room door handle) (ANOSIM R = 0.66, P = .005) but not composite 1 (bed rails, television remote control unit, call buttons, and telephone).

CONCLUSIONS

Surfaces in bleach-cleaned rooms contained a higher proportion of gram-positive microbiota, whereas rooms cleaned with quaternary ammonium compound contained a higher proportion of gram-negative microbiota, suggesting disinfectant products may impact the healthcare environment microbiome.

Reduced Susceptibility and Increased Resistance of Bacteria against Disinfectants: A Systematic Review

Disinfectants are used to reduce the concentration of pathogenic microorganisms to a safe level and help to prevent the transmission of infectious diseases. However, bacteria have a tremendous ability to respond to chemical stress caused by biocides, where overuse and improper use of disinfectants can be reflected in a reduced susceptibility of microorganisms. This review aims to describe whether mutations and thus decreased susceptibility to disinfectants occur in bacteria during disinfectant exposure. A systematic literature review following PRISMA guidelines was conducted with the databases PubMed, Science Direct and Web of Science. For the final analysis, 28 sources that remained of interest were included. Articles describing reduced susceptibility or the resistance of bacteria against seven different disinfectants were identified. The important deviation of the minimum inhibitory concentration was observed in multiple studies for disinfectants based on triclosan and chlorhexidine. A reduced susceptibility to disinfectants and potentially related problems with antibiotic resistance in clinically important bacterial strains are increasing. Since the use of disinfectants in the community is rising, it is clear that reasonable use of available and effective disinfectants is needed. It is necessary to develop and adopt strategies to control disinfectant resistance.

Persistence against benzalkonium chloride promotes rapid evolution of tolerance during periodic disinfection

Biocides used as disinfectants are important to prevent the transmission of pathogens, especially during the current antibiotic resistance crisis. This crisis is exacerbated by phenotypically tolerant persister subpopulations that can survive transient antibiotic treatment and facilitate resistance evolution. Here, we show that E. coli displays persistence against a widely used disinfectant, benzalkonium chloride (BAC). Periodic, persister-mediated failure of disinfection rapidly selects for BAC tolerance, which is associated with reduced cell surface charge and mutations in the lpxM locus, encoding an enzyme for lipid A biosynthesis. Moreover, the fitness cost incurred by BAC tolerance turns into a fitness benefit in the presence of antibiotics, suggesting a selective advantage of BAC-tolerant mutants in antibiotic environments. Our findings highlight the links between persistence to disinfectants and resistance evolution to antimicrobials.

Biocide-tolerance and antibiotic-resistance in community environments and risk of direct transfers to humans: Unintended consequences of community-wide surface disinfecting during COVID-19?

During the current pandemic, chemical disinfectants are ubiquitously and routinely used in community environments, especially on common touch surfaces in public settings, as a means of controlling the virus spread. An underappreciated risk in current regulatory guidelines and scholarly discussions, however, is that the persisting input of chemical disinfectants can exacerbate the growth of biocide-tolerant and antibiotic-resistant bacteria on those surfaces and allow their direct transfers to humans. For COVID-19, the most commonly used disinfecting agents are quaternary ammonium compounds, hydrogen peroxide, sodium hypochlorite, and ethanol, which account for two-thirds of the active ingredients in current EPA-approved disinfectant products for the novel coronavirus. Tolerance to each of these compounds, which can be either intrinsic or acquired, has been observed on various bacterial pathogens. Of those, mutations and horizontal gene transfer, upregulation of efflux pumps, membrane alteration, and biofilm formation are the common mechanisms conferring biocide tolerance in bacteria. Further, the linkage between disinfectant use and antibiotic resistance was suggested in laboratory and real-life settings. Evidence showed that substantial bacterial transfers to hands could effectuate from short contacts with surrounding surfaces and further from fingers to lips. While current literature on disinfectant-induced antimicrobial resistance predominantly focuses on municipal wastes and the natural environments, in reality the community and public settings are most severely impacted by intensive and regular chemical disinfecting during COVID-19 and, due to their proximity to humans, biocide-tolerant and antibiotic-resistant bacteria emerged in these environments may pose risks of direct transfers to humans, particularly in densely populated urban communities. Here we highlight these risk factors by reviewing the most pertinent and up-to-date evidence, and provide several feasible strategies to mitigate these risks in the scenario of a prolonging pandemic.

Antimicrobials and Food-Related Stresses as Selective Factors for Antibiotic Resistance along the Farm to Fork Continuum

Antimicrobial resistance (AMR) is a global problem and there has been growing concern associated with its widespread along the animal-human-environment interface. The farm-to-fork continuum was highlighted as a possible reservoir of AMR, and a hotspot for the emergence and spread of AMR. However, the extent of the role of non-antibiotic antimicrobials and other food-related stresses as selective factors is still in need of clarification. This review addresses the use of non-antibiotic stressors, such as antimicrobials, food-processing treatments, or even novel approaches to ensure food safety, as potential drivers for resistance to clinically relevant antibiotics. The co-selection and cross-adaptation events are covered, which may induce a decreased susceptibility of foodborne bacteria to antibiotics. Although the available studies address the complexity involved in these phenomena, further studies are needed to help better understand the real risk of using food-chain-related stressors, and possibly to allow the establishment of early warnings of potential resistance mechanisms.

Low-Level Tolerance to Fluoroquinolone Antibiotic Ciprofloxacin in QAC-Adapted Subpopulations of Listeria monocytogenes

There was a development of low-level tolerance to fluoroquinolone antibiotic ciprofloxacin in Listeria monocytogenes after sublethal adaptation to quaternary ammonium compound (QAC). Using eight L. monocytogenes strains, we determined the changes in short-range MIC, growth rate, and survival for heterologous stress response to ciprofloxacin, after sublethal exposure to daily cycles of fixed or gradually increasing concentration of QAC. Three main findings were observed. (1) MIC increase—QAC-adapted subpopulations exhibited a significant increase in short-range MIC of ciprofloxacin, by 1.5 to 2.9 fold, as compared to non-adapted control for 4/8 strains (p < 0.05). (2) Growth rate increase—QAC-adapted subpopulations exhibited significant 2.1- to 6.8- fold increase in growth rate (OD₆₀₀ at 10 h) in ciprofloxacin-containing broth, as compared to non-adapted control for 5/8 strains (p < 0.05). (3) Survival increase—QAC-adapted subpopulations of L. monocytogenes yielded significantly higher survival in ciprofloxacin-containing agar by 2.2 to 4.3 log CFU/mL for 4/8 strains, as compared to non-adapted control (p ˂ 0.05). However, for other 4/8 strains of L. monocytogenes, there was no increase in survival of QAC-adapted subpopulations, as compared to non-adapted control in ciprofloxacin. These findings suggest the potential formation of low-level ciprofloxacin-tolerant subpopulations in some L. monocytogenes strains when exposed to residual QAC concentrations (where QAC might be used widely) and such cells if not inactivated might create food safety risk.

Structure, Assembly, and Function of Tripartite Efflux and Type 1 Secretion Systems in Gram-Negative Bacteria

Tripartite efflux pumps and the related type 1 secretion systems (T1SSs) in Gram-negative organisms are diverse in function, energization, and structural organization. They form continuous conduits spanning both the inner and the outer membrane and are composed of three principal components-the energized inner membrane transporters (belonging to ABC, RND, and MFS families), the outer membrane factor channel-like proteins, and linking the two, the periplasmic adaptor proteins (PAPs), also known as the membrane fusion proteins (MFPs). In this review we summarize the recent advances in understanding of structural biology, function, and regulation of these systems, highlighting the previously undescribed role of PAPs in providing a common architectural scaffold across diverse families of transporters. Despite being built from a limited number of basic structural domains, these complexes present a staggering variety of architectures. While key insights have been derived from the RND transporter systems, a closer inspection of the operation and structural organization of different tripartite systems reveals unexpected analogies between them, including those formed around MFS- and ATP-driven transporters, suggesting that they operate around basic common principles. Based on that we are proposing a new integrated model of PAP-mediated communication within the conformational cycling of tripartite systems, which could be expanded to other types of assemblies.

Extensively-drug-resistant Klebsiella pneumoniae ST307 outbreak strain from north-eastern Germany does not show increased tolerance to quaternary ammonium compounds and chlorhexidine

BACKGROUND

An outbreak of extensively-drug-resistant Klebsiella pneumoniae strain ST307 in a cluster of hospitals in north-east Germany gave rise to the assumption that the epidemiological success of the strain could be based on increased tolerance to biocides.

METHODS

The tolerance of the outbreak strain was compared with epidemiologically unrelated clinical isolates of K. pneumoniae, and reference strains of Pseudomonas aeruginosa (ATCC 15442) and Escherichia coli K12 (NCTC 10538). Tests were performed in a miniaturized assay based on European Standard EN 1040. The widely used biocides benzalkonium chloride (BAC) and didecyl dimethyl ammonium chloride (DDAC), their commercial formulation Descosept spezial (DS), and the antiseptic agent chlorhexidine digluconate (CHG) were selected as test substances. These biocides are used regularly in the hospitals involved in the outbreak.

FINDINGS

All biocides had a bactericidal effect against all tested strains in the quantitative suspension test within 5 min at typically used concentrations and dilutions. The effectiveness of BAC and DDAC alone and in combination, and CHG antisepsis were not impaired under tested conditions.

CONCLUSION

The outbreak strain did not show significantly increased tolerance towards biocides regarding the antiseptic. Thus, the epidemiological success of the strain has to be ascribed to other causes, such as inadequate hand hygiene of visitors.

Tolerance of Listeria monocytogenes to biocides used in food processing environments

Listeria monocytogenes is a foodborne pathogen that causes a life-threatening disease in humans known as listeriosis. Contamination of food during processing is the main route of transmission of Listeria monocytogenes. Therefore, biocides play a crucial role in food processing environments as they act as the first line of defense in the prevention and control of L. monocytogenes. Residues of biocides may be present at sublethal concentrations after disinfection. This, unfortunately, subjects L. monocytogenes to selection pressure, giving rise to tolerant strains, which pose a threat to food safety and public health. This review will give a brief description of L. monocytogenes, the clinical manifestation, treatment of listeriosis as well as recently recorded outbreaks. The article will then discuss the current literature on the ability of L. monocytogenes strains to tolerate biocides especially quaternary ammonium compounds as well as the mechanisms of tolerance towards biocides including the activation of efflux pump systems.

Contribution of Time, Taxonomy, and Selective Antimicrobials to Antibiotic and Multidrug Resistance in Wastewater Bacteria

The use of nontherapeutic broad-spectrum antimicrobial agents triclosan (TCS) and benzalkonium chloride (BC) can contribute to bacterial resistance to clinically relevant antibiotics. Antimicrobial-resistant bacteria within wastewater may reflect the resistance burden within the human microbiome, as antibiotics and pathogens in wastewater can track with clinically relevant parameters during perturbations to the community. In this study, we monitored culturable and resistant wastewater bacteria and cross-resistance to clinically relevant antibiotics to gauge the impact of each antimicrobial and identify factors influencing cross-resistance profiles. Bacteria resistant to TCS and BC were isolated from wastewater influent over 21 months, and cross-resistance, taxonomy, and monthly changes were characterized under both antimicrobial selection regimes. Cross-resistance profiles from each antimicrobial differed within and between taxa. BC-isolated bacteria had a significantly higher prevalence of resistance to "last-resort antibiotic" colistin, while isolates resistant to TCS exhibited higher rates of multidrug resistance. Prevalence of culturable TCS-resistant bacteria decreased over time following Food and Drug Administration (FDA) TCS bans. Cross-resistance patterns varied according to sampling date, including among the most clinically important antibiotics. Correlations between strain-specific resistance profiles were largely influenced by taxonomy, with some variations associated with sampling date. The results reveal that time, taxonomy, and selection by TCS and BC impact features of cross-resistance patterns among diverse wastewater microorganisms, which could reflect the variety of factors influencing resistance patterns relevant to a community microbiome.

Efflux Pump-Driven Antibiotic and Biocide Cross-Resistance in Pseudomonas aeruginosa Isolated from Different Ecological Niches: A Case Study in the Development of Multidrug Resistance in Environmental Hotspots

Pseudomonas aeruginosa is an opportunistic pathogen displaying high intrinsic antimicrobial resistance and the ability to thrive in different ecological environments. In this study, the ability of P. aeruginosa to develop simultaneous resistance to multiple antibiotics and disinfectants in different natural niches were investigated using strains collected from clinical samples, veterinary samples, and wastewater. The correlation between biocide and antimicrobial resistance was determined by employing principal component analysis. Molecular mechanisms linking biocide and antimicrobial resistance were interrogated by determining gene expression using RT-qPCR and identifying a potential genetic determinant for co- and cross-resistance using whole-genome sequencing. A subpopulation of P. aeruginosa isolates belonging to three sequence types was resistant against the common preservative benzalkonium chloride and showed cross-resistance to fluoroquinolones, cephalosporins, aminoglycosides, and multidrug resistance. Of these, the epidemiological high-risk ST235 clone was the most abundant. The overexpression of the MexAB-OprM drug efflux pump resulting from amino acid mutations in regulators MexR, NalC, or NalD was the major contributing factor for cross-resistance that could be reversed by an efflux pump inhibitor. This is the first comparison of antibiotic-biocide cross-resistance in samples isolated from different ecological niches and serves as a confirmation of laboratory-based studies on biocide adapted isolates. The isolates from wastewater had a higher incidence of multidrug resistance and biocide-antibiotic cross-resistance than those from clinical and veterinary settings.

Smectite clay minerals reduce the acute toxicity of quaternary alkylammonium compounds towards potentially pathogenic bacterial taxa present in manure and soil

Quaternary alkylammonium compounds (QAACs) are a group of cationic surfactants which are disinfectants with numerous industrial and agricultural applications and frequently released into the environment. One recent hypothesis is that bacteria present in soil will be protected from acute toxic effects of QAACs in the presence of expandable layer silicates due to interlayer sorption. We therefore studied bacterial growth kinetics with high temporal resolution and determined minimal inhibitory concentrations (MICs) of two QAACs, benzyldimethyldodecylammonium chloride (BAC-C12) and didecyldimethylammonium chlorid (DADMAC-C10), for eight strains of different bacterial taxa (Escherichia coli, Acinetobacter, Enterococcus faecium, Enterococcus faecalis, and Pseudomonas fluorescens) in relation to QAAC sorption to smectite and kaolinite. The MICs of BAC-C12 and DADMAC-C10 were in the absence of smectite and kaolinite in the order of 10 to 30 µg mL⁻¹ and 1.0 to 3.5 µg mL⁻¹ for all strains except the more sensitive Acinetobacter strain. For all tested strains and both tested QAACs, the presence of smectite increased apparent MIC values while kaolinite had no effect on MICs. Sorption curves without bacteria showed that smectite sorbed larger amounts of QAACs than kaolinite. Correcting nominal QAAC concentrations employed in toxicity tests for QAAC sorption using the sorption curves explained well the observed shifts in apparent MICs. Transmission electron microscopy (TEM) demonstrated that the interlayer space of smectite expanded from 13.7 ± 1 Å to 19.9 ± 1.5 Å after addition of BAC-C12. This study provides first evidence that low charge 2:1 expandable layer silicates can play an important role for buffering QAAC toxicity in soils.

Issues beyond resistance: inadequate antibiotic therapy and bacterial hypervirulence

The administration of antibiotics while critical for treatment, can be accompanied by potentially severe complications. These include toxicities associated with the drugs themselves, the selection of resistant organisms and depletion of endogenous host microbiota. In addition, antibiotics may be associated with less well-recognized complications arising through changes in the pathogens themselves. Growing evidence suggests that organisms exposed to antibiotics can respond by altering the expression of toxins, invasins and adhesins, as well as biofilm, resistance and persistence factors. The clinical significance of these changes continues to be explored; however, it is possible that treatment with antibiotics may inadvertently precipitate a worsening of the clinical course of disease. Efforts are needed to adjust or augment antibiotic therapy to prevent the transition of pathogens to hypervirulent states. Better understanding the role of antibiotic-microbe interactions and how these can influence disease course is critical given the implications on prescription guidelines and antimicrobial stewardship policies.

Pseudomonas aeruginosa and microbial keratitis

Pseudomonas aeruginosa, a versatile Gram-negative pathogen that can cause a wide range of infections, is the most common causative agent in cases of bacterial keratitis associated with contact-lens use. Corneal infections with P. aeruginosa often have poor clinical outcomes and can result in long and costly treatments. During the infection process, the pathogen exploits its large genome, encoding complex regulatory networks and a wide range of virulence factors, including motility and the secretion of various proteases and toxins. Although antibiotic resistance levels in the UK are low, higher levels have been seen in some other countries. In the face of increasing antibiotic resistance, alternative therapeutic approaches such as antivirulence strategies and phage therapy are being developed. There is increasing evidence to suggest that keratitis infections are associated with a phylogenetic subgroup of P. aeruginosa isolates carrying the gene encoding the potent cytotoxin exotoxin U, one of two mutually exclusive exotoxins secreted via the type III secretion system. The mechanisms behind this association are unclear, but understanding the genetic differences that predispose P. aeruginosa to cause corneal infections may allow for the development of targeted and more effective future treatments to reduce the morbidity of P. aeruginosa keratitis. In order to minimize the risk of severe P. aeruginosa eye infections, a wide range of contact-lens disinfection solutions are available. Constant exposure to biocides at a range of concentrations, from sub-inhibitory to inhibitory, could contribute to the development of resistance to both antibiotics and disinfectants.

Mutation rate and efflux response of bacteria exposed to a novel antimicrobial iodo-thiocyanate complex

OBJECTIVES

Antimicrobials, at sub-lethal concentrations, can act as selectors and promoters of resistance by increasing mutation rates. We measured the rate of Escherichia coli mutation from levofloxacin (LVX) sensitivity to resistance when it was grown under the near-lethal challenge of the novel biocidal iodo-thiocyanate complex (ITC). Another relevant factor affecting the emergence of antimicrobial resistance is the role of efflux pumps. Consequently, we evaluated whether ITC could potentially be a substrate for efflux pumps, and thus that efflux-mediated resistance could arise towards ITC.

METHODS

The mutation rate was measured by fluctuation analysis, when multiple parallel E. coli cultures were grown in the absence and presence of ITC. Then the mutational events, which occurred independently in each culture, were scored by plating the fraction of the culture in LVX-selective solid media and compared with the total cell number. To detect if ITC is a substrate for efflux pumps, minimum inhibitory concentrations (MICs) were determined against Pseudomonas aeruginosa in the absence and presence of the efflux pump inhibitor (EPI).

RESULTS

We have found that the E. coli exposed to the near-lethal level of ITC had a slight, but not significant, increase in mutation rate compared with unexposed cultures. Furthermore, the presence of EPI decreased the MIC of ITC by a modest 2-fold, showing that ITC was not a target for efflux pumps.

CONCLUSIONS

ITC usage most likely will not promote resistance development via increased mutation rates, and efflux-mediated resistance emergence to it is less likely than for some other antimicrobials.

The impact and mechanism of quaternary ammonium compounds on the transmission of antibiotic resistance genes

The emergence of antibiotic resistance genes (ARGs) in microbes can be largely attributed to the abuse and misuse of antibiotics and biocides. Quaternary ammonium compounds (QACs) have been used worldwide as common disinfectants and detergents; however, their potential impact on the spread and diffusion of ARGs is still unknown. In this study, we detected the QAC resistance gene (qacEΔ1), the 1 integron gene (intI1), and 12 ARGs (sul1, sul2, cfr, cml, fexA, tetA, tetG, tetQ, tetX, ermB, bla_TEM, and dfrA1) in 48 water samples from three watersheds by quantitative PCR (qPCR). We investigated the evolution of bacterial antibiotic resistance under QAC and antibiotic environmental pressures by long-term continuous culture. In addition, five QACs were selected to investigate the effect of QAC on the efficiency of conjugation transfer. The changes in bacterial cell membrane and production of reactive oxygen species (ROS) were detected by flow cytometry, revealing the mechanism by which QAC affects the spread of antibiotic resistance. Our results showed that the QAC resistance gene was ubiquitous in watersheds and it had significant correlation with intI1 and seven ARGs (r = 0.999, p < 0.01). QACs could increase the resistance of bacteria to multiple antibiotics. Furthermore, all five QACs promoted the conjugation transfer of the RP4 plasmid; the optimal concentration of QACs was about 10^-1-10^-2 mg/L and their transfer efficiencies were between 1.33 × 10^-6 and 8.87 × 10^-5. QACs enhanced membrane permeability of bacterial cells and stimulated bacteria to produce ROS, which potentially promoted the transfer of plasmids between bacteria. In conclusion, this study demonstrated that QACs may facilitate the evolution and gene transfer of antibiotic resistance gene among microbiome.

Sub-lethal antimicrobial photodynamic inactivation affects Pseudomonas aeruginosa PAO1 quorum sensing and cyclic di-GMP regulatory systems

BACKGROUND

Antimicrobial photodynamic inactivation (APDI) is a new therapeutic modality which needs more precision during application due to the possibility of exposure of bacteria to sub-lethal doses (sAPDI). In this study, we aimed to evaluate the effect of sAPDI on Pseudomonas aeruginosa quorum sensing (QS) and c-di-GMP signaling which are important virulence factor regulatory systems.

METHODS

Biofilm formation, pyoverdine, pyocyanin and protease production of P. aeruginosa was evaluated before and after a single sAPDI treatment with 0.8 mM methylene blue (MB) plus 1, 2, and 5-min irradiation with red laser light. Fluorescent lasB, rhlA, pqsA, and cdrA reporters of P. aeruginosa PAO1 and P. aeruginosa ΔmexAB-oprM were treated individually with sAPDI and the regulatory signals were detected. The gene expressions were also assessed after sAPDI using quantitative real-time PCR analysis.

RESULTS

Morphological observations and molecular assessments indicated that sAPDI with 0.8 mM MB along with 2- and 5-min irradiation led to an increase in the expression of the Las QS system and c-di-GMP signaling, while 1 min irradiation revealed dissimilar results (increase in lasB expression and decrease in c-di-GMP levels). Expression of rhlA and pqsA did not change in response to sAPDI. Further, a severe lethal effect of sAPDI was observed in P. aeruginosa ΔmexAB-oprM as compared with the wild type strain, whilst there was no difference in QS and c-di-GMP levels as detected by reporters between treated and untreated samples.

CONCLUSION

The results suggest that sAPDI affects QS and c-di-GMP signaling inP. aeruginosa in a time-dependent manner.

Challenges and opportunities for antimicrobial stewardship in resource-rich and resource-limited countries

Introduction: Inappropriate prescription practices, patient and provider knowledge and attitudes, variable availability of diagnostic and surveillance systems, and the unrestricted use of antimicrobials in animals and plants are contributory factors to the global crisis of antimicrobial resistance (AMR). Areas covered: Notwithstanding that interventions to revert AMR should be tailored to the socio-politico-economic landscape, there is a global consensus for the implementation and enhancement of antimicrobial stewardship strategies. Yet the implementation of Antimicrobial Stewardship Programs (ASPs) remains relatively limited within healthcare settings and faces complex challenges in resource-limited countries. The current review summarizes the limitations of current ASPs, translation challenges in resource-limited countries, and potential solutions. Expert opinion: Suboptimal ASP implementation in hospitals is multifactorial. Restriction of antimicrobial use should be informed by risk-benefit analyses, including the potential for substitute prescribing, and displacement of selection pressures. Thresholds in population use of antibiotics above which AMR increases may provide quantitative targets for ASPs. Horizontal and vertical collaborations involving policymakers and the general public are of paramount importance. While impactful prescribing changes require sustained engagement of the public and health-care professionals, we warn against over-estimating the benefits of behavioral interventions. We advocate for population-level stewardship interventions in addition to investment in structural factors that will aid ASP implementation.

Evaluation of the Bactericidal Activity of Didecyl Dimethyl Ammonium Chloride in 2-Propanol against Pseudomonas aeruginosa Strains with Adaptive Resistance to this Active Substance According to European Standards

This study evaluated the bactericidal activity of the cationic surface active compound didecyldimethylammonium chloride in 2-propanol against the two reference strains Pseudomonas aeruginosa and Pseudomonas aeruginosa (tetracycline-resistant) as well as their isolates adapted to this active substance. Individual phases and stages of European Standards which are intended to determine the bactericidal activity of disinfectants in medical areas were used. Disinfection parameters of the tested substance as determined by suspension methods were not sufficient to achieve the required bactericidal reduction in the carrier method for Pseudomonas aeruginosa and all its adapted isolates. Pseudomonas aeruginosa (tetracycline-resistant) and its adapted isolates were more sensitive to the tested active substance when the contact time was extended from 5 to 10/15 min. Adaptive resistance of Pseudomonas aeruginosa strains can be abolished by using increased concentrations of the tested substance and/or extended contact time.

Laundry and textile hygiene in healthcare and beyond

The elimination of microbial contaminations from textile is an important aspect of laundering apart from the removal of stains and dirt from used and worn textiles. Although the framework for institutional laundering is well regulated to ensure hygienic cleanliness via the use of e.g. high temperatures and bleaching agents, there are several open points, especially in domestic laundering. In both cases, energy efficiency of appliances is a main driver for innovation and has resulted in a general decrease in washing temperatures which in turn can impact the antimicrobial efficacy of laundering. Thus, the different factors influencing the input and removal of microbial cells in the laundering process and possible adverse effects of microbial contaminants in the washing machine and on the textiles as well as suitable counteractions are discussed in this article, focusing on the clinical area but also considering the domestic environment, which will gain importance in the future, e.g. by the increase of elderly and ill persons being cared for at home.

Benzalkonium Chlorides: Uses, Regulatory Status, and Microbial Resistance

Benzalkonium chlorides (BACs) are chemicals with widespread applications due to their broad-spectrum antimicrobial properties against bacteria, fungi, and viruses. This review provides an overview of the market for BACs, as well as regulatory measures and available data on safety, toxicity, and environmental contamination. We focus on the effect of frequent exposure of microbial communities to BACs and the potential for cross-resistant phenotypes to emerge. Toward this goal, we review BAC concentrations in consumer products, their correlation with the emergence of tolerance in microbial populations, and the associated risk potential. Our analysis suggests that the ubiquitous and frequent use of BACs in commercial products can generate selective environments that favor microbial phenotypes potentially cross-resistant to a variety of compounds. An analysis of benefits versus risks should be the guidepost for regulatory actions regarding compounds such as BACs.

Strong correlation of total phenotypic resistance of samples from household environments and the prevalence of class 1 integrons suggests for the use of the relative prevalence of intI1 as a screening tool for multi-resistance

One of the biggest challenges of health care systems worldwide is the increasing number of pathogenic bacteria resistant to a growing number of antibiotics. In this respect, class 1 integrons which are part of mobile genetic elements can confer several phenotypes including resistance to a broad range of antibiotic classes, heavy metals and biocides. They are linked to common resistance genes and have penetrated pathogenic and commensal bacteria likewise. Therefore its relative prevalence can be a proxy for antimicrobial resistance and anthropogenic pollution. Household environments are areas with a high influx of bacteria from humans, animals and foods, and biocides and detergents are frequently used. In this study we aimed to investigate the relative prevalence of class 1 integrons in household environments, in relation to the number of antibiotic and benzalkonium chloride resistant phenotypes of a sample point, for the validation of the relative prevalence of class 1 integrons as a screening tool for multi-resistance. Kitchen sink and bathroom sink U-bends, dishwasher, washing machines and toothbrushes of 28 households were probed. Copies /mL of class 1 integron integrase gene and 16SrDNA gene were determined by qPCR and bacteria of the respective sample were isolated on ampicillin selective agar plates, followed by the determination of the species and phenotypic resistance profiles. The relative prevalence of class 1 integrons in relation to 16SrDNA was calculated and correlated to phenotypic resistance. Our findings show a high relative prevalence of class 1 integrons in water reticulation systems of household environments and in particular shower U-bends. Furthermore, prevalence of class 1 integrons correlates strongly (r_s = 0.95) with total phenotypic resistance at a sample point and suggest that a standardized assay determining the relative prevalence of class 1 integrons could be used as a useful screening tool in the assessment of multi-resistance in environmental samples.

Continuous culture of Escherichia coli, under selective pressure by a novel antimicrobial complex, does not result in development of resistance

We attempted to generate de novo resistance to a newly described biocidal complex, ITC (iodo-thiocyanate complex), and to levofloxacin (LVX) in Escherichia coli ATCC 25922, by means of selective chemostat culture. We measured resistance by determining the minimum inhibitory concentrations (MICs) for these agents. E. coli underwent 20-day parallel adaptive evolution routes under no antimicrobial selection, and gradually increasing ITC and LVX selection pressure. Long-term exposure of E. coli to ITC did not induce resistance to ITC, or cross-resistance to LVX. No distinct mutational pattern was evidenced from whole-genome sequence (WGS)-based comparisons of ITC-challenged and unchallenged bacterial populations. Moreover, the exposed E. coli population could not survive a 2 × MIC challenge of ITC. By contrast, resistance to LVX was rapidly induced (on day 1 the MIC had increased 16-fold), selected for (by day 14 the MIC had increased 64-fold) and enriched with a highly characteristic genome mutational pattern. WGS of this evolving population revealed that the majority of mutations appeared in the genes of LVX target proteins (GyrA, ParC, ParE) and drug influx (OmpF). This study suggests that the usage of ITC may not trigger the emergence of facile resistance or cross-resistance, in contrast to common antibiotics.

Loss of Function in Escherichia coli Exposed to Environmentally Relevant Concentrations of Benzalkonium Chloride

Assessing the risk of resistance associated with biocide exposure commonly involves exposing microorganisms to biocides at concentrations close to the MIC. With the aim of representing exposure to environmental biocide residues, Escherichia coli MG1655 was grown for 20 passages in the presence or absence of benzalkonium chloride (BAC) at 100 ng/liter and 1,000 ng/liter (0.0002% and 0.002% of the MIC, respectively). BAC susceptibility, planktonic growth rates, motility, and biofilm formation were assessed, and differentially expressed genes were determined via transcriptome sequencing. Planktonic growth rate and biofilm formation were significantly reduced (P < 0.001) following BAC adaptation, while BAC minimum bactericidal concentration increased 2-fold. Transcriptomic analysis identified 289 upregulated and 391 downregulated genes after long-term BAC adaptation compared with the respective control organism passaged in BAC-free medium. When the BAC-adapted bacterium was grown in BAC-free medium, 1,052 genes were upregulated and 753 were downregulated. Repeated passage solely in biocide-free medium resulted in 460 upregulated and 476 downregulated genes compared with unexposed bacteria. Long-term exposure to environmentally relevant BAC concentrations increased the expression of genes associated with efflux and reduced the expression of genes associated with outer-membrane porins, motility, and chemotaxis. This was manifested phenotypically through the loss of function (motility). Repeated passage in a BAC-free environment resulted in the upregulation of multiple respiration-associated genes, which was reflected by increased growth rate. In summary, repeated exposure of E. coli to BAC residues resulted in significant alterations in global gene expression that were associated with minor decreases in biocide susceptibility, reductions in growth rate and biofilm formation, and loss of motility.IMPORTANCE Exposure to very low concentrations of biocides in the environment is a poorly understood risk factor for antimicrobial resistance. Repeated exposure to trace levels of the biocide benzalkonium chloride (BAC) resulted in loss of function (motility) and a general reduction in bacterial fitness but relatively minor decreases in susceptibility. These changes were accompanied by widespread changes in the Escherichia coli transcriptome. These results demonstrate the importance of including phenotypic characterization in studies designed to assess the risks of biocide exposure.

Mutant selection window of disinfectants for Staphylococcus aureus and Pseudomonas aeruginosa

OBJECTIVES

The aim of this study was to determine the mutant selection window (MSW) of various disinfectants against Staphylococcus aureus and Pseudomonas aeruginosa clinical isolates to determine the tendency of these strains to acquire resistance to disinfectants.

METHODS

A total of 60 S. aureus isolates [30 methicillin-resistant S. aureus (MRSA) and 30 methicillin-susceptible S. aureus (MSSA)] and 30 P. aeruginosa, including 2 multidrug-resistant P. aeruginosa (MDRP), were collected in Japan. The minimum inhibitory concentrations (MICs) and mutant prevention concentrations (MPCs) of disinfectants, including sodium hypochlorite (NaOCl), against these strains were established to determine the MSW.

RESULTS

The MSW₅₀, MSW₈₀ and MSW₁₀₀ for sodium hypochlorite against S. aureus and P. aeruginosa were 4×, 8× and 16× MIC, respectively. Strains surviving in the sodium hypochlorite MSW remained at a concentration of ≤0.3% (≤3072μg/mL).

CONCLUSIONS

This is the first evaluation of the bactericidal activity against S. aureus and P. aeruginosa strains surviving in the MSW of disinfectants. Environmental disinfection at low concentrations of sodium hypochlorite does not kill micro-organisms. Proper use of sodium hypochlorite shows a bactericidal effect against various pathogenic micro-organisms and is inexpensive, making it frequently used globally.

Electrochemical Analysis of Aqueous Benzalkonium Chloride Micellar Solution and Its Mediated Electrocatalytic De-Chlorination Application

The physicochemical properties of biologically important benzalkonium chlorides (BKCs) and the effects of its structure on the de-chlorination of allyl chloride was studied by electrogenerated [Co(I)(bipyridine)3]+ (Co(I)) using an electrochemical technique. The results of [Co(II)(bipyridine)3]2+ (Co(II)) cyclic voltammetry in the presence of BKC demonstrates Co(II)/Co(III) redox couple for physicochemical analysis of BKC and Co(II)/Co(I) redox couple for catalytic application. Cyclic voltammetry over a range of scan rates and BKC concentrations revealed the BKC-bound Co(II)/Co(III) micelles showed that the identification of cmc and association of the probe Co(II) species, associated more in the hydrophobic region. In addition, change in diffusion coefficient value of Co(II)/Co(III) with BKC concentration demonstrates the association of Co(II) in micellar hydrophobic region. The beneficial effects of BKC could be accounted for by considering the benzyl headgroup-Co (II) precatalyst-volatile organic compounds (VOCs) (allyl chloride here) substrate interaction. Chromatography/mass spectroscopy (GC/MS) revealed 100% complete de-chlorination of allyl chloride accompanied by three non-chloro products. This is the first report of benzyl headgroup-induced micellar enhancement by an electrochemical method, showing that it is possible to use hydrophobic benzyl headgroup-substitution to tune the properties of micelles for various applications.