High-throughput plasmid purification for capillary sequencing

Diagnostic Value of Next-Generation Sequencing in Periprosthetic Joint Infection: A Systematic Review

Next‐generation sequencing (NGS) has developed rapidly in the last decade and is emerging as a promising diagnostic tool for periprosthetic joint infection (PJI). However, its diagnostic value for PJI is still uncertain. This systematic review aimed to explore the diagnostic value of NGS for PJI and verify its accuracy for culture‐negative PJI patients. We conducted this systematic review in accordance with the Preferred Reporting Items for Systematic Reviews and Meta‐Analysis (PRISMA) guidelines. Medline, Embase, and Cochrane Library were searched to identify diagnostic technique studies evaluating the accuracy of NGS in the diagnosis of PJI. The diagnostic sensitivity, specificity, and positive and negative predictive values were estimated for each article. The detection rate of NGS for culture‐negative PJI patients or PJI patients with antibiotic administration history was also calculated. Of the 87 identified citations, nine studies met the inclusion criteria. The diagnostic sensitivities and specificities of NGS ranged from 63% to 96% and 73% to 100%, respectively. The positive and negative predictive values ranged from 71% to 100% and 74% to 95%, respectively. The detection rate of NGS for culture‐negative PJI patients in six studies was higher than 50% (range from 82% to 100%), while in three studies it was lower than 50% (range from 9% to 31%). Also, the detection rate of NGS for PJIs with antibiotic administration history ranged from 74.05% to 92.31%. In conclusion, this systematic review suggests that NGS may have the potential to be a new tool for the diagnosis of PJI and should be considered to be added to the portfolio of diagnostic procedures. Furthermore, NGS showed a favorable diagnostic accuracy for culture‐negative PJI patients or PJI patients with antibiotic administration history. However, due to the small sample sizes of studies and substantial heterogeneity among the included studies, more research is needed to confirm or disprove these findings.

Phylogenetics and genetic variation of Heligmosomoides thomomyos in Western pocket gophers (Thomomys spp.)

The host specificities and systematics of North American Heligmosomoides species remain particularly uncertain. The primary aim of this study was to verify that a species described previously based only on morphology, H. thomomyos, from pocket gopher (Rodentia: Geomyidae) hosts in Oregon represented a monophyletic lineage. In order to address this aspect, as well as to further understand relationships and geographic patterns, we carried out phylogenetic, genetic diversity, and population dynamic analyses using partial 18S rRNA and COI mtDNA sequences of Heligmosomoides specimens. Phylogenetic analyses suggested that there are likely multiple Heligmosomoides species present in these hosts. This was supported by the high degree of divergence and differentiation found among populations, significant population structure between locations, and a modest positive association between geographic and genetic distances. This study serves as the first molecular characterization and first phylogenetic report of H. thomomyos, and documents two new host records for this parasite. The relationship of H. thomomyos among pocket gopher hosts and to other Heligmosomoides species, however, warrants continued study.

First report of molecular characterization and phylogeny of Trichuris fossor Hall, 1916 (Nematoda: Trichuridae)

Because species of Trichuris are morphologically similar and ranges of host preference are variable, using molecular data to evaluate species delineations is essential for properly quantifying biodiversity of and relationships within Trichuridae. Trichuris fossor has been reported from Thomomys spp. (Rodentia: Geomyidae, ‘pocket gophers’) hosts based on morphological features alone. Partial 18S rRNA sequences for specimens identified as T. fossor based on morphology, along with sequences from 26 additional taxa, were used for a phylogenetic analysis. Evolutionary histories were constructed using maximum likelihood and Bayesian inference. In both analyses, the specimens fell within the Trichuris clade with 100% support and formed a distinct subclade with 100% support. These results confirm that T. fossor is a distinct species and represent the first molecular report for it. Relatedness among species within the family were well resolved in the BI tree. This study represents an initial effort to obtain a more comprehensive view of Trichuridae by including a new clade member, T. fossor. A better understanding of Trichuridae phylogeny could contribute to further characterization of host-associations, including species that infect livestock and humans.

Paths of Heritable Mitochondrial DNA Mutation and Heteroplasmy in Reference and gas-1 Strains of Caenorhabditis elegans

Heteroplasmy—the presence of more than one mitochondrial DNA (mtDNA) sequence type in a cell, tissue, or individual—impacts human mitochondrial disease and numerous aging-related syndromes. Understanding the trans-generational dynamics of mtDNA is critical to understanding the underlying mechanisms of mitochondrial disease and evolution. We investigated mtDNA mutation and heteroplasmy using a set of wild-type (N2 strain) and mitochondrial electron transport chain (ETC) mutant (gas-1) mutant Caenorhabditis elegans mutation-accumulation (MA) lines. The N2 MA lines, derived from a previous experiment, were bottlenecked for 250 generations. The gas-1 MA lines were created for this study, and bottlenecked in the laboratory for up to 50 generations. We applied Illumina-MiSeq DNA sequencing to L1 larvae from five gas-1 MA lines and five N2 MA lines to detect and characterize mtDNA mutation and heteroplasmic inheritance patterns evolving under extreme drift. mtDNA copy number increased in both sets of MA lines: three-fold on average among the gas-1 MA lines and five-fold on average among N2 MA lines. Eight heteroplasmic single base substitution polymorphisms were detected in the gas-1 MA lines; only one was observed in the N2 MA lines. Heteroplasmy frequencies ranged broadly in the gas-1 MA lines, from as low as 2.3% to complete fixation (homoplasmy). An initially low-frequency (<5%) heteroplasmy discovered in the gas-1 progenitor was observed to fix in one gas-1 MA line, achieve higher frequency (37.4%) in another, and be lost in the other three lines. A similar low-frequency heteroplasmy was detected in the N2 progenitor, but was lost in all five N2 MA lines. We identified three insertion-deletion (indel) heteroplasmies in gas-1 MA lines and six indel variants in the N2 MA lines, most occurring at homopolymeric nucleotide runs. The observed bias toward accumulation of single nucleotide polymorphisms in gas-1 MA lines is consistent with the idea that impaired mitochondrial activity renders mtDNA more vulnerable to this type of mutation. The consistent increases in mtDNA copy number implies that extreme genetic drift provides a permissive environment for elevated organelle genome copy number in C. elegans reference and gas-1 strains. This study broadens our understanding of the heteroplasmic mitochondrial mutation process in a multicellular model organism.

Size-selective DNA separation: recovery spectra help determine the sodium chloride (NaCl) and polyethylene glycol (PEG) concentrations required

In the presence of sodium chloride (NaCl), DNA fragments can be size-selectively separated by varying the final concentration of polyethylene glycol (PEG). This separation strategy in combination with the use of paramagnetic particles provides a valuable platform for achieving the desired DNA size interval, which is important in automated library preparation for high-throughput DNA sequencing. Here, we report the establishment of recovery spectra of DNA fragments that enable the determination of suitable NaCl and PEG concentrations for size-selective separation. Firstly, at a given NaCl concentration, the recovery equation was obtained by fitting the DNA recovery ratios versus the PEG concentrations using the logistic function to determine the required parameters. Secondly, the slope function of the recovery equation was achieved by deducing its first derivative. Therefore, the recovery spectrum can be generated using the slope function based on those parameters. According to the recovery spectra of different length DNA fragments, suitable NaCl and PEG concentrations can be determined, respectively, by calculating their resolution values and recovery ratios. The strategy was effectively applied to the size-selective separation of 532-, 400-, and 307-bp fragments at the selected reagent concentrations with recoveries of 96.9, 64.7, and 85.9%, respectively. Our method enables good predictions of NaCl and PEG concentrations for size-selective DNA separation.

A new method for the determination of critical polyethylene glycol concentration for selective precipitation of DNA fragments

Separation strategies based on size-selective precipitation of DNA fragments with polyethylene glycol (PEG) have been used for achieving desired DNA interval in automated sample preparation for next-generation sequencing. By varying PEG concentration, DNA fragments of different sizes can be precipitated onto surfaces of carboxyl-coated paramagnetic particles selectively, and therefore, the desired DNA interval can be obtained. However, one of the crucial points in this approach is to determine the critical PEG concentration for DNA fragment of a certain size. The aim of this work was to develop a convenient and reliable method for accurately determining the critical PEG concentration. In our method, at a fixed concentration of sodium chloride (NaCl), recovered DNA samples obtained with different PEG concentrations were directly quantified, and their concentrations as a function of the PEG concentration were fitted by the logistic function. The critical PEG value was easily and accurately determined from the fitted logistic function. The repeatability and stability of the critical PEG value were assessed, showing an excellent reliability of the method. Based on this method, critical PEG values of different-size DNA fragments were determined at different NaCl concentrations. The effectiveness of the method was also demonstrated by selective precipitation of DNA fragments.

Competition for DNA binding sites using Promega DNA IQ™ paramagnetic beads

The Promega DNA IQ™ system is easily amenable to automation and has been an integral part of standard operating procedures for many forensic laboratories including those of the Royal Canadian Mounted Police (RCMP) since 2004. Due to some failure to extract DNA from samples that should have produced DNA using our validated automated DNA IQ™-based protocol, the competition for binding sites on the DNA IQ™ magnetic beads was more closely examined. Heme from heavily blooded samples interfered slightly with DNA binding. Increasing the concentration of Proteinase K during lysis of these samples did not enhance DNA recovery. However, diluting the sample lysate following lysis prior to DNA extraction overcame the reduction in DNA yield and preserved portions of the lysates for subsequent manual or automated extraction. Dye/chemicals from black denim lysates competed for binding sites on the DNA IQ™ beads and significantly reduced DNA recovery. Increasing the size or number of black denim cuttings during lysis had a direct adverse effect on DNA yield from various blood volumes. The dilution approach was successful on these samples and permitted the extraction of high DNA yields. Alternatively, shortening the incubation time for cell lysis to 30 min instead of the usual overnight at 56 °C prevented competition from black denim dye/chemicals and increased DNA yields.

High rate of large deletions in Caenorhabditis briggsae mitochondrial genome mutation processes

Mitochondrial DNA (mtDNA) mutations underlie a variety of human genetic disorders and are associated with the aging process. mtDNA polymorphisms are widely used in a variety of evolutionary applications. Although mtDNA mutation spectra are known to differ between distantly related model organisms, the extent to which mtDNA mutation processes vary between more closely related species and within species remains enigmatic. We analyzed mtDNA divergence in two sets of 250-generation Caenorhabditis briggsae mutation-accumulation (MA) lines, each derived from a different natural isolate progenitor: strain HK104 from Okayama, Japan, and strain PB800 from Ohio, United States. Both sets of C. briggsae MA lines accumulated numerous large heteroplasmic mtDNA deletions, whereas only one similar event was observed in a previous analysis of Caenorhabditis elegans MA line mtDNA. Homopolymer length change mutations were frequent in both sets of C. briggsae MA lines and occurred in both intergenic and protein-coding gene regions. The spectrum of C. briggsae mtDNA base substitution mutations differed from the spectrum previously observed in C. elegans. In C. briggsae, the HK104 MA lines experienced many different base substitution types, whereas the PB800 lines displayed only C:G --> T:A transitions, although the difference was not significant. Over half of the mtDNA base substitutions detected in the C. briggsae MA lines were in a heteroplasmic state, whereas all those previously characterized in C. elegans MA line mtDNA were fixed changes, indicating a narrower mtDNA bottleneck in C. elegans as compared with C. briggsae. Our results show that C. briggsae mtDNA is highly susceptible to large deletions and that the mitochondrial mutation process varies between Caenorhabditis nematode species.

Molecular evolution in Panagrolaimus nematodes: origins of parthenogenesis, hermaphroditism and the Antarctic species P. davidi

BACKGROUND

As exemplified by the famously successful model organism Caenorhabditis elegans, nematodes offer outstanding animal systems for investigating diverse biological phenomena due to their small genome sizes, short generation times and ease of laboratory maintenance. Nematodes in the genus Panagrolaimus have served in comparative development and anhydrobiosis studies, and the Antarctic species P. davidi offers a powerful paradigm for understanding the biological mechanisms of extreme cold tolerance. Panagrolaimus nematodes are also unique in that examples of gonochoristic, hermaphroditic and parthenogenetic reproductive modes have been reported for members of this genus. The evolutionary origins of these varying reproductive modes and the Antarctic species P. davidi, however, remain enigmatic.

RESULTS

We collected nuclear ribosomal RNA gene and mitochondrial protein-coding gene sequences from diverse Panagrolaimus species and strains, including newly discovered isolates from Oregon, to investigate phylogenetic relationships in this nematode genus. Nuclear phylogenies showed that the species and strains historically identified as members of Panagrolaimus constitute a paraphyletic group, suggesting that taxonomic revision is required for Panagrolaimus and related nematode lineages. Strain-specific reproductive modes were mapped onto the molecular phylogeny to show a single origin of parthenogenesis from a presumably gonochoristic ancestor. The hermaphroditic strains were all placed outside a major monophyletic clade that contained the majority of other Panagrolaimus nematodes. Phylogenetic analyses of mitochondrial sequences showed that substantial molecular and geographic diversity exists within the clade of parthenogenetic strains. The Antarctic species P. davidi was found to be very closely related to two Panagrolaimus strains from southern California. Phylogenetic and molecular clock analyses suggested that P. davidi and the California strain PS1579 shared a common ancestor in the very recent evolutionary past.

CONCLUSION

Our study provides a phylogenetic framework for understanding the evolutionary origins and diversification patterns of varying reproductive modes within Panagrolaimus and important insights into the origin of the Antarctic species P. davidi. Panagrolaimus offers a powerful nematode model for understanding diverse evolutionary phenomena including the evolution of asexuality and the adaptive evolution of extreme cold tolerance.

Intron presence-absence polymorphisms in Daphnia

Here, we report 2 novel intron gains segregating in populations of Daphnia pulex endemic to Oregon. These novel introns do not have an obvious source and are not present in any D. pulex populations outside Oregon, other species of Daphnia that we examined, or any other organism for which sequence data are available. Furthermore, the novel introns are both found in the same gene, a Rab GTPase (rab4), and they appear to differ in their insertion site by one base pair, providing some support to the proto-splice site hypothesis. The rarity of intron-gain polymorphisms is questioned as we discovered 2 events in an initial survey of only 6 nuclear loci in 36 Daphnia individuals. Neutrality tests failed to ascertain a clear selective effect for either intron insertion, and a significant difference in recombination rate was not observed in alleles that contain the novel intron insertion versus alleles lacking it. We conclude that one novel intron insertion segregating at high frequencies in Daphnia populations in Oregon is unlikely to be adaptive and may result from the reduced efficacy of selection in isolated populations of small effective size.

An electrophoretic capture method for efficient recovery of rare sequences from heterogeneous DNA

It is difficult to isolate rare, PCR-quality DNA from specimens containing large quantities of nonspecific DNA from multiple sources (heterogeneous DNA). Extracting human DNA from stool for colorectal cancer (CRC) screening tests exemplifies this technically challenging sample preparation problem. The stool matrix is complex, the DNA composition heterogeneous, and CRC-associated mutated DNA is rare. This report describes a novel solid phase DNA sequence-specific hybrid capture sample preparation method: the reversible electrophoretic capture affinity protocol (RECAP). We show that RECAP, compared with other methods, is capable of extracting linearly increasing amounts of human DNA from increasing amounts of total stool DNA in a manner that avoids co-purifying PCR inhibitors. RECAP thereby increases the yield of rare mutated DNA molecules and thus increases the detection sensitivity for CRC-associated mutations.

A titer plate-based polymer microfluidic platform for high throughput nucleic acid purification

A 96-well solid-phase reversible immobilization (SPRI) reactor plate was designed to demonstrate functional titer plate-based microfluidic platforms. Nickel, large area mold inserts were fabricated using an SU-8 based, UV-LIGA technique on 150 mm diameter silicon substrates. Prior to UV exposure, the prebaked SU-8 resist was flycut to reduce the total thickness variation to less than 5 mum. Excellent UV lithography results, with highly vertical sidewalls, were obtained in the SU-8 by using an UV filter to remove high absorbance wavelengths below 350 nm. Overplating of nickel in the SU-8 patterns produced high quality, high precision, metal mold inserts, which were used to replicate titer plate-based SPRI reactors using hot embossing of polycarbonate (PC). Optimized molding conditions yielded good feature replication fidelity and feature location integrity over the entire surface area. Thermal fusion bonding of the molded PC chips at 150 degrees C resulted in leak-free sealing, which was verified in leakage tests using a fluorescent dye. The assembled SPRI reactor was used for simple, fast purification of genomic DNA from whole cell lysates of several bacterial species, which was verified by PCR amplification of the purified genomic DNA.

A high-throughput, low-cost method for the preparation of "sequencing-ready" phage DNA template

We have developed a simple and efficient protocol for the isolation of good-quality recombinant phage DNA useful for all downstream processing, including automated sequencing. The overnight-grown phage particles were effectively precipitated (without any contaminating Escherichia coli DNA and other culture media components) by adjusting the pH of the culture medium to 5.2 with sodium acetate, followed by addition of ethanol to 25%. The phage DNA was selectively precipitated with ethanol in the presence of guanidinium thiocyanate under alkaline pH, resulting in uniform quality and quantity of phage DNA. The quality of the phage DNA preparation was demonstrated by DNA sequencing that provided an average read length of >700 bases (PHRED20 quality). This protocol for plating, picking, growing, and subsequent DNA purification of individual phage clones can be completely automated using any standard robotic platform. This protocol does not require any commercial kits and can be completed within 2h.

Ameiotic recombination in asexual lineages of Daphnia

Despite the enormous theoretical attention given to the evolutionary consequences of sexual reproduction, the validity of the key assumptions on which the theory depends rarely has been evaluated. It is often argued that a reduced ability to purge deleterious mutations condemns asexual lineages to an early extinction. However, most well characterized asexual lineages fail to exhibit the high levels of neutral allelic divergence expected in the absence of recombination. With purely descriptive data, it is difficult to evaluate whether this pattern is a consequence of the rapid demise of asexual lineages, an unusual degree of mutational stability, or recombination. Here, we show in mutation-accumulation lines of asexual Daphnia that the rate of loss of nucleotide heterozygosity by ameiotic recombination is substantially greater than the rate of introduction of new variation by mutation. This suggests that the evolutionary potential of asexual diploid species is not only a matter of mutation accumulation and reduced efficiency of selection, and [corrected] it underscores the limited utility of using neutral allelic divergence as an indicator of ancient asexuality.

Facile recovery of individual high-molecular-weight, low-copy-number natural plasmids for genomic sequencing

Sequencing of the large (>50 kb), low-copy-number (<5 per cell) plasmids that mediate horizontal gene transfer has been hindered by the difficulty and expense of isolating DNA from individual plasmids of this class. We report here that a kit method previously devised for purification of bacterial artificial chromosomes (BACs) can be adapted for effective preparation of individual plasmids up to 220 kb from wild gram-negative and gram-positive bacteria. Individual plasmid DNA recovered from less than 10 ml of Escherichia coli, Staphylococcus, and Corynebacterium cultures was of sufficient quantity and quality for construction of high-coverage libraries, as shown by sequencing five native plasmids ranging in size from 30 kb to 94 kb. We also report recommendations for vector screening to optimize plasmid sequence assembly, preliminary annotation of novel plasmid genomes, and insights on mobile genetic element biology derived from these sequences. Adaptation of this BAC method for large plasmid isolation removes one major technical hurdle to expanding our knowledge of the natural plasmid gene pool.

The relative roles of three DNA repair pathways in preventing Caenorhabditis elegans mutation accumulation

Mutation is a central biological process whose rates and spectra are influenced by a variety of complex and interacting forces. Although DNA repair pathways are generally known to play key roles in maintaining genetic stability, much remains to be understood about the relative roles of different pathways in preventing the accumulation of mutations and the extent of heterogeneity in pathway-specific repair efficiencies across different genomic regions. In this study we examine mutation processes in base excision repair-deficient (nth-1) and nucleotide excision repair-deficient (xpa-1) Caenorhabditis elegans mutation-accumulation (MA) lines across 24 regions of the genome and compare our observations to previous data from mismatch repair-deficient (msh-2 and msh-6) and wild-type (N2) MA lines. Drastic variation in both average and locus-specific mutation rates, ranging two orders of magnitude for the latter, was detected among the four sets of repair-deficient MA lines. Our work provides critical insights into the relative roles of three DNA repair pathways in preventing C. elegans mutation accumulation and provides evidence for the presence of pathway-specific DNA repair territories in the C. elegans genome.

Purification and preconcentration of genomic DNA from whole cell lysates using photoactivated polycarbonate (PPC) microfluidic chips

We discuss the use of a photoactivated polycarbonate (PPC) microfluidic chip for the solid-phase, reversible immobilization (SPRI) and purification of genomic DNA (gDNA) from whole cell lysates. The surface of polycarbonate was activated by UV radiation resulting in a photo-oxidation reaction, which produced a channel surface containing carboxylate groups. The gDNA was selectively captured on this photoactivated surface in an immobilization buffer, which consisted of 3% polyethylene glycol, 0.4 M NaCl and 70% ethanol. The methodology reported herein is similar to conventional SPRI in that surface-confined carboxylate groups are used for the selective immobilization of DNA; however, no magnetic beads or a magnetic field are required. As observed by UV spectroscopy, a load of ∼7.6 ± 1.6 µg/ml of gDNA was immobilized onto the PPC bed. The recovery of DNA following purification was estimated to be 85 ± 5%. The immobilization and purification assay using this PPC microchip could be performed within ∼25 min as follows: (i) DNA immobilization ∼6 min, (ii) chip washout with ethanol 10 min, and (iii) drying and gDNA desorption ∼6 min. The PPC microchip could also be used for subsequent assays with no substantial loss in recovery, no observable carryover and no need for ‘reactivation’ of the PC surface with UV light.

Solid-Support Sample Loading for DNA Sequencing

We present a new method for simplified low-quantity DNA loading onto microelectrophoresis devices. The method is based on combined solid-phase extraction, purification, and transport of DNA reversibly bound on paramagnetic microspheres. DNA is adsorbed onto the microspheres, captured with a magnetized permalloy wire, and then directly injected as a highly focused sample plug into the separation channel. This method circumvents both the minimum volume requirement of pipettors (since only solid beads are transported) and the timing complications of double-T microfluidic injection. Injections from Sanger samples of <100 pg total suspended weight match the signal strength of our previous conventional injections at >10-times the starting DNA sample. Sequencing traces show a resolution that matches or exceeds double-T injections. A kinetic model reproduces the time-dependence of the injection signals and proves that total nonidealities in the method produce injection-broadened plugs of approximately 1-s duration. The method should be broadly extendable to DNA and protein separations in both microdevice and capillary electrophoresis.

High-throughput isolation of ultra-pure plasmid DNA by a robotic system

BACKGROUND

With the availability of complete genomes, a systematic inventory of cellular processes becomes achievable. This requires assessing the function of all individual genes. Transfection of plasmid DNA into cell culture cells is an essential technique for this aim as it allows functional overexpression or downregulation of genes. While many robotic systems isolate plasmids for sequencing purposes, for more demanding applications such as transfections there is a shortage of robots for the high-throughput isolation of plasmid DNA.

RESULTS

Here we describe a custom-made, automated device, which uses a special protocol to isolate plasmid DNAs with a purity sufficient for efficient transfections into mammalian cells. Approximately 1,600 ultra pure plasmids can be isolated in a 96-well plate format within 12 hours. As a unique feature the robot comprises the integration of a centrifuge instead of expensive columns, the use of a custom-made pipetting head with a movable gripper, especially designed shaking platforms and an acetone wash facility.

CONCLUSION

Using this robot we demonstrate how centrifugation steps with multiple precipitations, most notably through a precipitation step of SDS in isopropanol, lead to high purity plasmid DNA and make possible high-throughput transfections into mammalian cells for functional gene annotations.

Detection of diverse new Francisella-like bacteria in environmental samples

Following detection of putative Francisella species in aerosol samples from Houston, Texas, we surveyed soil and water samples from the area for the agent of tularemia, Francisella tularensis, and related species. The initial survey used 16S rRNA gene primers to detect Francisella species and related organisms by PCR amplification of DNA extracts from environmental samples. This analysis indicated that sequences related to Francisella were present in one water and seven soil samples. This is the first report of the detection of Francisella-related species in soil samples by DNA-based methods. Cloning and sequencing of PCR products indicated the presence of a wide variety of Francisella-related species. Sequences from two soil samples were 99.9% similar to previously reported sequences from F. tularensis isolates and may represent new subspecies. Additional analyses with primer sets developed for detection and differentiation of F. tularensis subspecies support the finding of very close relatives to known F. tularensis strains in some samples. While the pathogenicity of these organisms is unknown, they have the potential to be detected in F. tularensis-specific assays. Similarly, a potential new subspecies of Francisella philomiragia was identified. The majority of sequences obtained, while more similar to those of Francisella than to any other genus, were phylogenetically distinct from known species and formed several new clades potentially representing new species or genera. The results of this study revise our understanding of the diversity and distribution of Francisella and have implications for tularemia epidemiology and our ability to detect bioterrorist activities.

Multiplexed fluorescence detection in microfabricated devices with both time-resolved and spectral-discrimination capabilities using near-infrared fluorescence

We examined the feasibility of using a two-color time-resolved detection scheme with microdevices for DNA sequencing applications. A home-built dual-color optical-fiber-based time-resolved near-infrared (IR) fluorescence microscope successfully coupled lifetime discrimination with color discrimination, increasing fluorescence multiplexing capabilities. The instrument was constructed by using two pulsed-diode lasers (680/780-nm excitation) and two avalanche photodiodes as the basic building blocks. The data were processed using electronics configured in a time-correlated single-photon counting format. The use of near-IR fluorescence detection greatly simplified the hardware and allowed low detection limits (< 0.1nM). We examined the separation of a single-base tract on a microchip and compared the performance with that of conventional capillary gel electrophoresis. The microchip was fabricated in glass and contained an effective separation length of 7.0 cm. It was found that, without incorporating a solid-phase reversible immobilization cleanup procedure, the calculated lifetime of the dye label on the microchip was longer and the standard deviation was larger than those of the same sample analyzed using capillary electrophoresis. Using cleanup steps, the accuracy and precision of the measurements improved. Lifetimes of four near-IR dyes (AlexaFluor680, IRD700, IRD800, and IRD40) used in this study were determined to be 986 ps (RSD=2.1%), 1551 ps (RSD=1.8%), 520 ps (RSD=3.3%), and 788 ps (RSD=4.9%), respectively, in a microchannel filled with poly(dimethylacrylamide) (POP-6) gel. The lifetimes calculated using maximum likelihood estimators provided favorable precision on the microchip, where small numbers of photocounts were collected. An M13mp18 template was sequenced on the microchip using a two-color two-lifetime format with POP-6 as the sieving polymer. Read lengths of 294 bp with calling accuracies of 90.8 and 83.7% were achieved in each color channel. The relatively low calling accuracy and the short read length resulted primarily from the short separation channel, which yielded low electrophoretic resolution.

Mutation rates, spectra and hotspots in mismatch repair-deficient Caenorhabditis elegans

Although it is clear that postreplicative DNA mismatch repair (MMR) plays a critical role in maintaining genomic stability in nearly all forms of life surveyed, much remains to be understood about the genome-wide impact of MMR on spontaneous mutation processes and the extent to which MMR-deficient mutation patterns vary among species. We analyzed spontaneous mutation processes across multiple genomic regions using two sets of mismatch repair-deficient (msh-2 and msh-6) Caenorhabditis elegans mutation-accumulation (MA) lines and compared our observations to mutation spectra in a set of wild-type (WT), repair-proficient C. elegans MA lines. Across most sequences surveyed in the MMR-deficient MA lines, mutation rates were approximately 100-fold higher than rates in the WT MA lines, although homopolymeric nucleotide-run (HP) loci composed of A:T base pairs mutated at an approximately 500-fold greater rate. In contrast to yeast and humans where mutation spectra vary substantially with respect to different specific MMR-deficient genotypes, mutation rates and patterns were overall highly similar between the msh-2 and msh-6 C. elegans MA lines. This, along with the apparent absence of a Saccharomyces cerevisiae MSH3 ortholog in the C. elegans genome, suggests that C. elegans MMR surveillance is carried out by a single Msh-2/Msh-6 heterodimer.

High-throughput sequencing: a failure mode analysis

BACKGROUND

Basic manufacturing principles are becoming increasingly important in high-throughput sequencing facilities where there is a constant drive to increase quality, increase efficiency, and decrease operating costs. While high-throughput centres report failure rates typically on the order of 10%, the causes of sporadic sequencing failures are seldom analyzed in detail and have not, in the past, been formally reported.

RESULTS

Here we report the results of a failure mode analysis of our production sequencing facility based on detailed evaluation of 9,216 ESTs generated from two cDNA libraries. Two categories of failures are described; process-related failures (failures due to equipment or sample handling) and template-related failures (failures that are revealed by close inspection of electropherograms and are likely due to properties of the template DNA sequence itself).

CONCLUSIONS

Preventative action based on a detailed understanding of failure modes is likely to improve the performance of other production sequencing pipelines.

Abundance, distribution, and mutation rates of homopolymeric nucleotide runs in the genome of Caenorhabditis elegans

Homopolymeric nucleotide runs, also called mononucleotide microsatellites, are a ubiquitous, dominant, and mutagenic feature of eukaryotic genomes. A clear understanding of the forces that shape patterns of homopolymer evolution, however, is lacking. We provide a focused investigation of the abundance, chromosomal distribution, and mutation spectra of the four strand-specific homopolymer types (A, T, G, C) >or=8 bp in the genome of Caenorhabditis elegans. A and T homopolymers vastly outnumber G and C HPs, and the run-length distributions of A and T homopolymers differ significantly from G and C homopolymers. A scanning window analysis of homopolymer chromosomal distribution reveals distinct clusters of homopolymer density in autosome arms that are regions of high recombination in C. elegans. Dramatic biases are detected among closely spaced homopolymers; for instance, we observe 994 A homopolymers immediately followed by a T homopolymer (5' to 3') and only 8 instances of T homopolymers directly followed by an A homopolymer. Empirical homopolymer mutation assays in a set of C. elegans mutation-accumulation lines reveal an approximately 20-fold higher mutation rate for G and C homopolymers compared to A and T homopolymers. Nuclear A and T homopolymers are also found to mutate approximately 100-fold more slowly than mitochondrial A and T homopolymers. This integrative approach yields a total nuclear genome-wide homopolymer mutation rate estimate of approximately 1.6 mutations per genome per generation.

Protein expression clone repositories for functional proteomics

The information generated from the sequence of the human genome has inspired efforts to systematically develop organized collections of human cDNA clones for use in expression screens in mammalian cells. These high-throughput cloning initiatives offer significant advantages over the cDNA libraries that have been used in the past, including greater experimental flexibility, immediate identification of hits, information regarding all tested proteins (even for those giving no response) and eventually more comprehensive coverage. Some of the lessons learned and the considerations that underlie the creation of genome-wide cDNA repositories are discussed here. Although still inchoate, these resources are already impacting the manner in which high-throughput functional screens are performed.

Recombinant proteins fused to thermostable partners can be purified by heat incubation

We developed a protocol for the fast purification of small proteins and peptides using heat incubation as the first purification step. The proteins are expressed from a new bacterial expression vector (pETM-90) fused to the C-terminus of thermostable Ftr from Methanopyrus kandleri. The vector further contains a 6xHis-tag to allow immobilised metal ion affinity purification and a TEV protease cleavage site to enable the removal of the His-tag and fusion partner. Heat incubation induces the specific denaturation and precipitation of the Escherichia coli proteins but not of the thermostable fusion protein. Using the fusion construct and the heat incubation protocol a number of fusion proteins were purified to near homogeneity. The thermostability was ensured when Ftr had a molecular weight higher than twice the target protein. The obtained purification yields were similar and, in some cases, even higher than the ones obtained by affinity purification with the same Ftr-fusion proteins or the same target proteins fused to other often used partners such as NusA, GST, or DsbA. The protocol does not depend on a specific thermostable protein as was shown by the exchange of Ftr for M. kandleri Mtd. Purification by heat incubation is a fast and inexpensive alternative to chromatographic techniques, particularly suitable for the production of antigenic sequences for which the loss of native structure is not detrimental. We proved that it can be easily automated.

Solid-phase reversible immobilization in microfluidic chips for the purification of dye-labeled DNA sequencing fragments

In this manuscript, we discuss the use of photoactivated polycarbonate (PC) for purification of dye-labeled terminator sequencing fragments using solid-phase reversible immobilization (SPRI) prior to gel electrophoretic sorting of these DNAs. An immobilization bed for the DNA purification was produced by exposing a posted microchannel to UV radiation, which induced a surface photooxidation reaction, resulting in the production of carboxylate groups. The immobilization microchannel contained microposts to increase the loading level of DNAs to improve signal intensity without the need for preconcentration. By suspending the sequencing cocktail in an immobilization buffer (TEG/ethanol), the DNA fragments demonstrated a high affinity for this carboxylated surface. The loading density of DNAs to this activated surface was found to be 3.9 pmol cm(-2). The captured DNA could be subsequently released from the surface by incubation with ddH2O. SPRI cleanup of dye-terminator sequencing fragments using the photoactivated PC chip and slab gel electrophoresis produced a read length comparable to the conventional SPRI format, which utilized carboxylated magnetic beads and a magnetic field. The read length for the PC-SPRI format was found to be 620 bases with a calling accuracy of 98.9%. The PC-SPRI cleanup format was also integrated to a capillary gel electrophoresis (CGE) system. The PC-SPRI method was shown to effectively remove excess dye terminator from the CGE tract, but yielded lower plate numbers, as compared to a direct injection method with purification accomplished off-chip. The loss in efficiency was found to result primarily from the extended injection time associated with the microchip purification method.

Practical applications of rolling circle amplification of DNA templates

Since its recent implementation at one of the world's largest high-throughput sequencing centers, the utility of MP-RCA for DNA sequencing has been thoroughly validated. However, applications of this technology extend far beyond DNA sequencing. While many of these applications have been explored in this chapter, the future will undoubtedly add to this growing list.

Isothermal strand-displacement amplification applications for high-throughput genomics

Amplification of source DNA is a nearly universal requirement for molecular biology applications. The primary methods currently available to researchers are limited to in vivo amplification in Escherichia coli hosts and the polymerase chain reaction. Rolling-circle DNA replication is a well-known method for synthesis of phage genomes and recently has been applied as rolling circle amplification (RCA) of specific target sequences as well as circular vectors used in cloning. Here, we demonstrate that RCA using random hexamer primers with 29 DNA polymerase can be used for strand-displacement amplification of different vector constructs containing a variety of insert sizes to produce consistently uniform template for end-sequencing reactions. We show this procedure to be especially effective in a high-throughput plasmid production sequencing process. In addition, we demonstrate that whole bacterial genomes can be effectively amplified from cells or small amounts of purified genomic DNA without apparent bias for use in downstream applications, including whole genome shotgun sequencing.

Transcript analysis of genes encoding a family 61 endoglucanase and a putative membrane-anchored family 9 glycosyl hydrolase from Phanerochaete chrysosporium

Phanerochaete chrysosporium cellulase genes were cloned and characterized. The cel61A product was structurally similar to fungal endoglucanases of glycoside hydrolase family 61, whereas the cel9A product revealed similarities to Thermobifida fusca Cel9A (E4), an enzyme with both endo- and exocellulase characteristics. The fungal Cel9A is apparently a membrane-bound protein, which is very unusual for microbial cellulases. Transcript levels of both genes were substantially higher in cellulose-grown cultures than in glucose-grown cultures. These results show that P. chrysosporium possesses a wide array of conventional and unconventional cellulase genes.

Microchip bioprocessor for integrated nanovolume sample purification and DNA sequencing

A microfabricated electrophoretic bioprocessor for integrated DNA sequencing sample desalting, template removal, preconcentration, and CE analysis is presented. A low-viscosity gel capture matrix, containing an acrylamide-copolymerized oligonucleotide complementary to the 20-base sequence directly 3' of the M13-40 universal forward priming site, is introduced into the 60-nL capture chamber. Unpurified DNA sequencing reaction products are electrophoretically driven through the chamber; extension products hybridize to the matrix, while contaminating buffering ions, Cl-, excess primer, and template DNA are unretained. Purification under optimized conditions is complete in only 120 s (binding temperature 50 degrees C, driving voltage 250 V). High-speed, integrated sequencing analysis is accomplished by releasing the gel-purified duplex at 67 degrees C and directly injecting onto a 15.9-cm effective length CE microchannel. Electrophoretic resolution of the sequencing products is complete in 32 min, producing a total of 560 bp with phred quality q > or = 20 (accuracy > or = 99%). This fully integrated nanoliter process decreases the purification time approximately 10-fold and the process volume approximately 100-fold while providing state-of-the-art sequencing results.

Glass bead purification of plasmid template DNA for high throughput sequencing of mammalian genomes

To meet the new challenge of generating the draft sequences of mammalian genomes, we describe the development of a novel high throughput 96-well method for the purification of plasmid DNA template using size-fractionated, acid-washed glass beads. Unlike most previously described approaches, the current method has been designed and optimized to facilitate the direct binding of alcohol-precipitated plasmid DNA to glass beads from alkaline lysed bacterial cells containing the insoluble cellular aggregate material. Eliminating the tedious step of separating the cleared lysate significantly simplifies the method and improves throughput and reliability. During a 4 month period of 96-capillary DNA sequencing of the Rattus norvegicus genome at the Baylor College of Medicine Human Genome Sequencing Center, the average success rate and read length derived from >1 800 000 plasmid DNA templates prepared by the direct lysis/glass bead method were 82.2% and 516 bases, respectively. The cost of this direct lysis/glass bead method in September 2001 was approximately 10 cents per clone, which is a significant cost saving in high throughput genomic sequencing efforts.