QTL analysis in a complex autopolyploid: genetic control of sugar content in sugarcane

Long read transcriptome sequencing of a sugarcane hybrid and its progenitors, Saccharum officinarum and S. spontaneum

Commercial sugarcane hybrids are derivatives from Saccharum officinarum and Saccharum spontaneum hybrids containing the full complement of S. officinarum and a few S. spontaneum chromosomes and recombinants with favorable agronomic characters from both the species. The combination of the two sub-genomes in varying proportions in addition to the recombinants presents a challenge in the study of gene expression and regulation in the hybrid. We now report the transcriptome analysis of the two progenitor species and a modern commercial sugarcane hybrid through long read sequencing technology. Transcripts were profiled in the two progenitor species S. officinarum (Black Cheribon), and S. spontaneum (Coimbatore accession) and a recent high yielding, high sugar variety Co 11015. The composition and contribution of the progenitors to a hybrid with respect to sugar, biomass, and disease resistance were established. Sugar related transcripts originated from S. officinarum while several stress and senescence related transcripts were from S. spontaneum in the hybrid. The hybrid had a higher number of transcripts related to sugar transporters, invertases, transcription factors, trehalose, UDP sugars, and cellulose than the two progenitor species. Both S. officinarum and the hybrid had an abundance of novel genes like sugar phosphate translocator, while S. spontaneum had just one. In general, the hybrid shared a larger number of transcripts with S. officinarum than with S. spontaneum, reflecting the genomic contribution, while the progenitors shared very few transcripts between them. The common isoforms among the three genotypes and unique isoforms specific to each genotype indicate that there is a high scope for improvement of the modern hybrids by utilizing novel gene isoforms from the progenitor species.

QTL mapping and identification of candidate genes linked to red rot resistance in sugarcane

Sugarcane (Saccharum species hybrid) is one of the most important commercial crops cultivated worldwide for products like white sugar, bagasse, ethanol, etc. Red rot is a major sugarcane disease caused by a hemi-biotrophic fungus, Colletotrichum falcatum Went., which can potentially cause a reduction in yield up to 100%. Breeding for red rot-resistant sugarcane varieties has become cumbersome due to its complex genome and frequent generation of new pathotypes of red rot fungus. In the present study, a genetic linkage map was developed using a selfed population of a popular sugarcane variety CoS 96268. A QTL linked to red rot resistance (qREDROT) was identified, which explained 26% of the total phenotypic variation for the trait. A genotype-phenotype network analysis performed to account for epistatic interactions, identified the key markers involved in red rot resistance. The differential expression of the genes located in the genomic region between the two flanking markers of the qREDROT as well as in the vicinity of the markers identified through the genotype-phenotype network analysis in a set of contrasting genotypes for red rot infection further confirmed the mapping results. Further, the expression analysis revealed that the plant defense-related gene coding 26S protease regulatory subunit is strongly associated with the red rot resistance. The findings can help in the screening of disease resistant genotypes for developing red rot-resistant varieties of sugarcane.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-023-03481-7.

Genome-wide association mapping identifies an SNF4 ortholog that impacts biomass and sugar yield in sorghum and sugarcane

Sorghum is a feed/industrial crop in developed countries and a staple food elsewhere in the world. This study evaluated the sorghum mini core collection for days to 50% flowering (DF), biomass, plant height (PH), soluble solid content (SSC), and juice weight (JW), and the sorghum reference set for DF and PH, in 7-12 testing environments. We also performed genome-wide association mapping with 6 094 317 and 265 500 single nucleotide polymorphism markers in the mini core collection and the reference set, respectively. In the mini core panel we identified three quantitative trait loci for DF, two for JW, one for PH, and one for biomass. In the reference set panel we identified another quantitative trait locus for PH on chromosome 6 that was also associated with biomass, DF, JW, and SSC in the mini core panel. Transgenic studies of three genes selected from the locus revealed that Sobic.006G061100 (SbSNF4-2) increased biomass, SSC, JW, and PH when overexpressed in both sorghum and sugarcane, and delayed flowering in transgenic sorghum. SbSNF4-2 encodes a γ subunit of the evolutionarily conserved AMPK/SNF1/SnRK1 heterotrimeric complexes. SbSNF4-2 and its orthologs will be valuable in genetic enhancement of biomass and sugar yield in plants.

Identification of potential MTAs and candidate genes for juice quality- and yield-related traits in Saccharum clones: a genome-wide association and comparative genomic study

Sugarcane is an economically important commercial crop which provides raw material for the production of sugar, jaggery, bioethanol, biomass and other by-products. Sugarcane breeding till today heavily relies on conventional breeding approaches which is time consuming, laborious and costly. Integration of marker-assisted selection (MAS) in sugarcane genetic improvement programs for difficult to select traits like sucrose content, resistance to pests and diseases and tolerance to abiotic stresses will accelerate varietal development. In the present study, association mapping approach was used to identify QTLs and genes associated with sucrose and other important yield-contributing traits. A mapping panel of 110 diverse sugarcane genotypes and 148 microsatellite primers were used for structured association mapping study. An optimal subpopulation number (ΔK) of 5 was identified by structure analysis. GWAS analysis using TASSEL identified a total of 110 MTAs which were localized into 27 QTLs by GLM and MLM (Q + K, PC + K) approaches. Among the 24 QTLs sequenced, 12 were able to identify potential candidate genes, viz., starch branching enzyme, starch synthase 4, sugar transporters and G3P-DH related to carbohydrate metabolism and hormone pathway-related genes ethylene insensitive 3-like 1, reversion to ethylene sensitive1-like, and auxin response factor associated to juice quality- and yield-related traits. Six markers, NKS 5_185, SCB 270_144, SCB 370_256, NKS 46_176 and UGSM 648_245, associated with juice quality traits and marker SMC31CUQ_304 associated with NMC were validated and identified as significantly associated to the traits by one-way ANOVA analysis. In conclusion, 24 potential QTLs identified in the present study could be used in sugarcane breeding programs after further validation in larger population. The candidate genes from carbohydrate and hormone response pathway presented in this study could be manipulated with genome editing approaches to further improve sugarcane crop.

An autopolyploid-suitable polyBSA-seq strategy for screening candidate genetic markers linked to leaf blight resistance in sugarcane

An autopolyploid-suitable polyBSA-seq strategy was developed for screening candidate genetic markers linked to leaf blight resistance in sugarcane. Due to the complex genome architecture, the quantitative trait loci mappings and linkage marker selections for agronomic traits of autopolyploid crops were mainly limited to the time-consuming and cost intensive construction of genetic maps. To map resistance-linked markers for sugarcane leaf blight (SLB) caused by Stagonospora tainanensis, the autopolyploid-suitable bulk-segregant analysis based on the sequencing (polyBSA-seq) strategy was successfully applied for the first time. Resistant- and susceptible-bulks (R- and S-bulks) constructed from the extreme-phenotypic sugarcane F₁ lines of YT93-159 × ROC22 were deep sequenced with 195.0 × for bulks and 74.4 × for parents. Informative single-dose variants (ISDVs) present as one copy in one parent and null in the other parent were detected based on the genome sequence of LA Purple, an autooctoploid Saccharum officinarum, to screen candidate linkage markers (CLMs). The proportion of the number of short reads harboring ISDVs in the total short reads covering a given genomic position was defined as ISDV index and the ISDVs with indices met the threshold set in this study (0.04-0.14) were selected as CLMs. In total, three resistance- and one susceptibility-related CLMs for SLB resistance were identified by the polyBSA-seq. Among them, two markers on chromosome 10 were less than 300 Kb apart. Furthermore, the RNA-seq was used to calculate the expression level of genes within 1.0 Mb from the aforementioned four CLMs, which demonstrated that twelve genes were differentially expressed between resistant and susceptible clones, including a receptor-like kinase and an ethylene-responsive transcription factor. This is the first reported polyBSA-seq in autopolyploid sugarcane, which specifically tailored for the fast selection of the CLMs and causal genes associated with important agronomic traits.

Strategies and considerations for implementing genomic selection to improve traits with additive and non-additive genetic architectures in sugarcane breeding

Simulations highlight the potential of genomic selection to substantially increase genetic gain for complex traits in sugarcane. The success rate depends on the trait genetic architecture and the implementation strategy. Genomic selection (GS) has the potential to increase the rate of genetic gain in sugarcane beyond the levels achieved by conventional phenotypic selection (PS). To assess different implementation strategies, we simulated two different GS-based breeding strategies and compared genetic gain and genetic variance over five breeding cycles to standard PS. GS scheme 1 followed similar routines like conventional PS but included three rapid recurrent genomic selection (RRGS) steps. GS scheme 2 also included three RRGS steps but did not include a progeny assessment stage and therefore differed more fundamentally from PS. Under an additive trait model, both simulated GS schemes achieved annual genetic gains of 2.6-2.7% which were 1.9 times higher compared to standard phenotypic selection (1.4%). For a complex non-additive trait model, the expected annual rates of genetic gain were lower for all breeding schemes; however, the rates for the GS schemes (1.5-1.6%) were still greater than PS (1.1%). Investigating cost-benefit ratios with regard to numbers of genotyped clones showed that substantial benefits could be achieved when only 1500 clones were genotyped per 10-year breeding cycle for the additive genetic model. Our results show that under a complex non-additive genetic model, the success rate of GS depends on the implementation strategy, the number of genotyped clones and the stage of the breeding program, likely reflecting how changes in QTL allele frequencies change additive genetic variance and therefore the efficiency of selection. These results are encouraging and motivate further work to facilitate the adoption of GS in sugarcane breeding.

ddRAD-seq derived genome-wide SNPs, high density linkage map and QTLs for fruit quality traits in strawberry (Fragaria x ananassa)

Understanding the genetic determinants are essential for improving the fruit quality traits of strawberry. In this study, we focused on mapping the loci for fruit-length (FL), -diameter (FD), -weight (FW) and -soluble solid content (SSC) using the genome-wide single nucleotide polymorphisms (SNPs) identified via ddRAD-sequencing of the F₁ population raised from Maehyang (♀) X Festival (♂). A total of 12,698 high quality SNPs were identified of which 1554 SNPs that showed significant Mendelian segregation (p < 0.05) were mapped to 53 linkage groups (LG) spanning a total of 2937.93 cM with an average marker density of 2.14 cM/locus. Six QTLs for FL and four QTLs for each of FD, FW and SSC were identified that explained 24–35%, 21–42%, 24–54% and 23–50% of overall phenotypic variations, respectively. The genes that lie within these QTL regions were extracted and discussed thoroughly. In addition, a high resolution melting marker (MF154) were designed based on the SNP A1⁷²³G of the UDP-glucose 4-epimerase GEPI48-like gene FAN_iscf00021287. The marker detected the high vs low sugar containing F₁ plants and commercial cultivars with 81.39% and 86.95% detection accuracy, respectively. These SNPs, linkage map, QTLs and candidate genes will be helpful in understanding and improving the fruit quality traits of strawberry.

Integration of sugarcane production technologies for enhanced cane and sugar productivity targeting to increase farmers' income: strategies and prospects

The idea of doubling the farmers' income in next 5 years has been slated by the Government of India. The specific target of increasing sugarcane farmers' income could be achieved by developing cost-effective technologies, transferring them from laboratory to land, educating the farmers and creating a linkage between all stakeholders. Consistent efforts shall be required to harness all possible sources for increasing farmer's income in and outside the agriculture sector with respect to improvement in sugarcane and sugar productivity, enhancement in resource use efficiency and adopting various other ways and means including intercropping, management of pests and diseases, use of biotechnological tools and minimizing post-harvest deterioration. The advances in sugarcane biotechnology could become remarkable in the coming years, both in terms of improving productivity as well as increasing the value and utility of this crop substantially. In future, genetically modified sugarcane varieties with increased resistance to different biotic and abiotic stresses would serve more towards sugarcane crop improvement. Any possibility of enhancement in the income of sugarcane farmers shall also be dependent upon the profitability and sustainability of the sugar industry. Integration of sugarcane production technologies for improvement in farm productivity, diversified sugarcane production system, reduced cost of cultivation along with increased processing plant efficiency and diversification to produce value added products shall ensure smooth and higher payment to the farmers. Development of low-cost technologies to convert "waste to resource" on a smaller scale shall also help the farmers to increase their income further. This paper focuses on possible measures to be taken up in each aspects of sugarcane cultivation including biotechnological approaches to achieve the goal of enhancing the income of sugarcane farmers substantially, particularly in the sub-tropical region of India.

A mosaic monoploid reference sequence for the highly complex genome of sugarcane

Sugarcane (Saccharum spp.) is a major crop for sugar and bioenergy production. Its highly polyploid, aneuploid, heterozygous, and interspecific genome poses major challenges for producing a reference sequence. We exploited colinearity with sorghum to produce a BAC-based monoploid genome sequence of sugarcane. A minimum tiling path of 4660 sugarcane BAC that best covers the gene-rich part of the sorghum genome was selected based on whole-genome profiling, sequenced, and assembled in a 382-Mb single tiling path of a high-quality sequence. A total of 25,316 protein-coding gene models are predicted, 17% of which display no colinearity with their sorghum orthologs. We show that the two species, S. officinarum and S. spontaneum, involved in modern cultivars differ by their transposable elements and by a few large chromosomal rearrangements, explaining their distinct genome size and distinct basic chromosome numbers while also suggesting that polyploidization arose in both lineages after their divergence.

Computation of the inverse additive relationship matrix for autopolyploid and multiple-ploidy populations

Rules to generate the inverse additive relationship matrix (A ^-1 ) are defined to enable the adoption restricted maximum likelihood (REML) and best linear unbiased prediction (BLUP) in autopolyploid populations with multiple ploidy levels. Many important agronomic, horticultural, ornamental, forestry, and aquaculture species are autopolyploids. However, the adoption of restricted maximum likelihood (REML), for estimating co/variance components, and best linear unbiased prediction (BLUP), for predicting breeding values, has been hampered in autopolyploid breeding by the absence of an appropriate means of generating the inverse additive relationship matrix (A ^-1 ). This paper defines rules to generate the A ^-1 of autopolyploid populations comprised of individuals of the same or different ploidy-levels, including populations exhibiting (1) odd-numbered ploidy levels (e.g. triploids), (2) sex-based differences in the probability that gametic genes are identical by descent and (3) somatic chromosome doubling. Inbreeding, due to double reduction, in autopolyploid founders in the absence of mating among relatives is also accounted for. A previously defined approach is modified, whereby rules are initially defined to build an inverse matrix of kinship coefficients (K ^-1 ), which is then used to generate A ^-1 . An R package (polyAinv; https://github.com/mghamilton/polyAinv ) to implement these rules has been developed and examples of analyses provided. The adoption of REML and BLUP methods made possible by these new rules has the potential to provide further insights into the quantitative genetic architecture of autopolyploid and multiple-ploidy populations, improve estimates of breeding values, and increase genetic gains made through recurrent selection.

Detection and validation of EST-SSR markers associated with sugar-related traits in sugarcane using linkage and association mapping

Sugar-related traits are of great importance in sugarcane breeding. In the present study, quantitative trait loci (QTL) mapping validated with association mapping was used to identify expressed sequence tag-simple sequence repeats (EST-SSRs) associated with sugar-related traits. For linkage mapping, 524 EST-SSRs, 241 Amplified Fragment Length Polymorphisms, and 10 genomic SSR markers were mapped using 283 F₁ progenies derived from an interspecific cross. Six regions were identified using Multiple QTL Mapping, and 14 unlinked markers using single marker analysis. Association analysis was performed on a set of 200 accessions, based on the mixed linear model. Validation of the EST-SSR markers using association mapping within the target QTL genomic regions identified two EST-SSR markers showing a putative relationship with uridine diphosphate (UDP) glycosyltransferase, and beta-amylase, which are associated with pol and sugar yield. These functional markers can be used for marker-assisted selection of sugarcane.

Transcriptomic analysis of transgressive segregants revealed the central role of photosynthetic capacity and efficiency in biomass accumulation in sugarcane

Sugarcane is among the most efficient crops in converting solar energy into chemical energy. However, due to its complex genome structure and inheritance, the genetic and molecular basis of biomass yield in sugarcane is still largely unknown. We created an F2 segregating population by crossing S. officinarum and S. spontaneum and evaluated the biomass yield of the F2 individuals. The F2 individuals exhibited clear transgressive segregation in biomass yield. We sequenced transcriptomes of source and sink tissues from 12 selected extreme segregants to explore the molecular basis of high biomass yield for future breeding of high-yielding energy canes. Among the 103,664 assembled unigenes, 10,115 and 728 showed significant differential expression patterns between the two extreme segregating groups in the top visible dewlap leaf and the 9^th culm internode, respectively. The most enriched functional categories were photosynthesis and fermentation in the high-biomass and the low-biomass groups, respectively. Our results revealed that high-biomass yield was mainly determined by assimilation of carbon in source tissues. The high-level expression of fermentative genes in the low-biomass group was likely induced by their low-energy status. Group-specific expression alleles which can be applied in the development of new high-yielding energy cane varieties via molecular breeding were identified.

The Challenge of Analyzing the Sugarcane Genome

Reference genome sequences have become key platforms for genetics and breeding of the major crop species. Sugarcane is probably the largest crop produced in the world (in weight of crop harvested) but lacks a reference genome sequence. Sugarcane has one of the most complex genomes in crop plants due to the extreme level of polyploidy. The genome of modern sugarcane hybrids includes sub-genomes from two progenitors Saccharum officinarum and S. spontaneum with some chromosomes resulting from recombination between these sub-genomes. Advancing DNA sequencing technologies and strategies for genome assembly are making the sugarcane genome more tractable. Advances in long read sequencing have allowed the generation of a more complete set of sugarcane gene transcripts. This is supporting transcript profiling in genetic research. The progenitor genomes are being sequenced. A monoploid coverage of the hybrid genome has been obtained by sequencing BAC clones that cover the gene space of the closely related sorghum genome. The complete polyploid genome is now being sequenced and assembled. The emerging genome will allow comparison of related genomes and increase understanding of the functioning of this polyploidy system. Sugarcane breeding for traditional sugar and new energy and biomaterial uses will be enhanced by the availability of these genomic resources.

GBS-based single dosage markers for linkage and QTL mapping allow gene mining for yield-related traits in sugarcane

BACKGROUND

Sugarcane (Saccharum spp.) is predominantly an autopolyploid plant with a variable ploidy level, frequent aneuploidy and a large genome that hampers investigation of its organization. Genetic architecture studies are important for identifying genomic regions associated with traits of interest. However, due to the genetic complexity of sugarcane, the practical applications of genomic tools have been notably delayed in this crop, in contrast to other crops that have already advanced to marker-assisted selection (MAS) and genomic selection. High-throughput next-generation sequencing (NGS) technologies have opened new opportunities for discovering molecular markers, especially single nucleotide polymorphisms (SNPs) and insertion-deletion (indels), at the genome-wide level. The objectives of this study were to (i) establish a pipeline for identifying variants from genotyping-by-sequencing (GBS) data in sugarcane, (ii) construct an integrated genetic map with GBS-based markers plus target region amplification polymorphisms and microsatellites, (iii) detect QTLs related to yield component traits, and (iv) perform annotation of the sequences that originated the associated markers with mapped QTLs to search putative candidate genes.

RESULTS

We used four pseudo-references to align the GBS reads. Depending on the reference, from 3,433 to 15,906 high-quality markers were discovered, and half of them segregated as single-dose markers (SDMs) on average. In addition to 7,049 non-redundant SDMs from GBS, 629 gel-based markers were used in a subsequent linkage analysis. Of 7,678 SDMs, 993 were mapped. These markers were distributed throughout 223 linkage groups, which were clustered in 18 homo(eo)logous groups (HGs), with a cumulative map length of 3,682.04 cM and an average marker density of 3.70 cM. We performed QTL mapping of four traits and found seven QTLs. Our results suggest the presence of a stable QTL across locations. Furthermore, QTLs to soluble solid content (BRIX) and fiber content (FIB) traits had markers linked to putative candidate genes.

CONCLUSIONS

This study is the first to report the use of GBS for large-scale variant discovery and genotyping of a mapping population in sugarcane, providing several insights regarding the use of NGS data in a polyploid, non-model species. The use of GBS generated a large number of markers and still enabled ploidy and allelic dosage estimation. Moreover, we were able to identify seven QTLs, two of which had great potential for validation and future use for molecular breeding in sugarcane.

Single nucleotide polymorphism in sugar pathway and disease resistance genes in sugarcane

Single nucleotide polymorphism in sugar pathway and disease resistance genes showing genetic association with sugar content and red rot resistance would be useful in marker-assisted genetic improvement of sugarcane. Validation and genotyping of potential sequence variants in candidate genes are necessary to understand their functional significance and trait association potential. We discovered, characterized, validated and genotyped SNPs and InDels in sugar pathway and disease resistance genes of Saccharum complex and sugarcane varieties using amplicon sequencing and CAPS assays. The SNPs were abundant in the non-coding 3'UTRs than 5'UTRs and coding sequences depicting a strong bias toward C to T transition substitutions than transversions. Sequencing of cloned amplicons validated 61.6 and 45.2 % SNPs detected in silico in 21 sugar pathway and 16 disease resistance genes, respectively. Sixteen SNPs in four sugar pathway genes and 10 SNPs in nine disease resistance genes were validated through cost-effective CAPS assay. Functional and adaptive significance of SNP and protein haplotypes identified in sugar pathway and disease resistance genes was assessed by correlating their allelic variation with missense amino acid substitutions in the functional domains, alteration in protein structure models and possible modulation of catalytic enzyme activity in contrasting high and low sugar and moderately red rot resistant and highly susceptible sugarcane genotypes. A strong genetic association of five SNPs in the sugar pathway and disease resistance genes, and an InDel marker in the promoter sequence of sucrose synthase-2 gene, with sugar content and red rot resistance, was evident. The functionally relevant SNPs and InDels, detected and validated in sugar pathway and disease resistance genes, and genic CAPS markers designed, would be of immense use in marker-assisted genetic improvement of sugarcane for sugar content and disease resistance.

Assessment of Functional EST-SSR Markers (Sugarcane) in Cross-Species Transferability, Genetic Diversity among Poaceae Plants, and Bulk Segregation Analysis

Expressed sequence tags (ESTs) are important resource for gene discovery, gene expression and its regulation, molecular marker development, and comparative genomics. We procured 10000 ESTs and analyzed 267 EST-SSRs markers through computational approach. The average density was one SSR/10.45 kb or 6.4% frequency, wherein trinucleotide repeats (66.74%) were the most abundant followed by di- (26.10%), tetra- (4.67%), penta- (1.5%), and hexanucleotide (1.2%) repeats. Functional annotations were done and after-effect newly developed 63 EST-SSRs were used for cross transferability, genetic diversity, and bulk segregation analysis (BSA). Out of 63 EST-SSRs, 42 markers were identified owing to their expansion genetics across 20 different plants which amplified 519 alleles at 180 loci with an average of 2.88 alleles/locus and the polymorphic information content (PIC) ranged from 0.51 to 0.93 with an average of 0.83. The cross transferability ranged from 25% for wheat to 97.22% for Schlerostachya, with an average of 55.86%, and genetic relationships were established based on diversification among them. Moreover, 10 EST-SSRs were recognized as important markers between bulks of pooled DNA of sugarcane cultivars through BSA. This study highlights the employability of the markers in transferability, genetic diversity in grass species, and distinguished sugarcane bulks.

Ploidy effect and genetic architecture exploration of stalk traits using DH and its corresponding haploid populations in maize

BACKGROUND

Doubled haploid (DH) lines produced via in vivo haploid induction have become indispensable in maize research and practical breeding, so it is important to understand traits characteristics in DH and its corresponding haploids which derived from each DH lines. In this study, a DH population derived from Zheng58 × Chang7-2 and a haploid population, were developed, genotyped and evaluated to investigate genetic architecture of eight stalk traits, especially rind penetrometer resistance (RPR) and in vitro dry matter digestion (IVDMD), which affecting maize stalk lodging-resistance and feeding values, respectively.

RESULTS

Phenotypic correlation coefficients ranged from 0.38 to 0.69 between the two populations for eight stalk traits. Heritability values of all stalk traits ranged from 0.49 to 0.81 in the DH population, and 0.58 to 0.89 in the haploid population. Quantitative trait loci (QTL) mapping study showed that a total of 47 QTL for all traits accounting for genetic variations ranging from 1.6 to 36.5% were detected in two populations. One or more QTL sharing common region for each trait were detected between two different ploidy populations. Potential candidate genes predicated from the four QTL support intervals for RPR and IVDMD were indirectly or directly involved with cellulose and lignin biosynthesis, which participated in cell wall formation. The increased expression levels of lignin and cellulose synthesis key genes in the haploid situation illustrated that dosage compensation may account for genome dosage effect in our study.

CONCLUSIONS

The current investigation extended understanding about the genetic basis of stalk traits and correlations between DH and its haploid populations, which showed consistence and difference between them in phenotype, QTL characters, and gene expression. The higher heritabilities and partly higher QTL detection power were presented in haploid population than in DH population. All of which described above could lay a preliminary foundation for genetic architecture study with haploid population and may benefit selection in haploid-stage to reduce cost in DH breeding.

Potential for Genetic Improvement of Sugarcane as a Source of Biomass for Biofuels

Sugarcane (Saccharum spp. hybrids) has great potential as a major feedstock for biofuel production worldwide. It is considered among the best options for producing biofuels today due to an exceptional biomass production capacity, high carbohydrate (sugar + fiber) content, and a favorable energy input/output ratio. To maximize the conversion of sugarcane biomass into biofuels, it is imperative to generate improved sugarcane varieties with better biomass degradability. However, unlike many diploid plants, where genetic tools are well developed, biotechnological improvement is hindered in sugarcane by our current limited understanding of the large and complex genome. Therefore, understanding the genetics of the key biofuel traits in sugarcane and optimization of sugarcane biomass composition will advance efficient conversion of sugarcane biomass into fermentable sugars for biofuel production. The large existing phenotypic variation in Saccharum germplasm and the availability of the current genomics technologies will allow biofuel traits to be characterized, the genetic basis of critical differences in biomass composition to be determined, and targets for improvement of sugarcane for biofuels to be established. Emerging options for genetic improvement of sugarcane for the use as a bioenergy crop are reviewed. This will better define the targets for potential genetic manipulation of sugarcane biomass composition for biofuels.

Using quantitative PCR with retrotransposon-based insertion polymorphisms as markers in sugarcane

Sugarcane is the main source of the world's sugar and is becoming increasingly important as a source of biofuel. The highly polyploid and heterozygous nature of the sugarcane genome has meant that characterization of the genome has lagged behind that of other important crops. Here we developed a method using a combination of quantitative PCR with a transposable marker system to score the relative number of alleles with a transposable element (TE) present at a particular locus. We screened two genera closely related to Saccharum (Miscanthus and Erianthus), wild Saccharum, traditional cultivars, and 127 modern cultivars from Brazilian and Australian breeding programmes. We showed how this method could be used in various ways. First, we showed that the method could be extended to be used as part of a genotyping system. Secondly, the history of insertion and timing of the three TEs examined supports our current understanding of the evolution of the Saccharum complex. Thirdly, all three TEs were found in only one of the two main lineages leading to the modern sugarcane cultivars and are therefore the first TEs identified that could potentially be used as markers for Saccharum spontaneum.

Mendelizing all Components of a Pyramid of Three Yield QTL in Tomato

Molecular markers allowed breeders to mendelize quantitative trait loci (QTL) providing another demonstration that quantitative traits are governed by the same principles as single qualitative genes. This research extends the QTL analysis to two and three QTL and tests our ability to mendelize an oligogenic trait. In tomato, agricultural yield is determined by the weight of the fruits harvested per unit area and the total soluble solids (% Brix)-sugars and acids. The current study explores the segregation of multiple independent yield-related QTL that were identified and mapped using introgression lines (IL) of Solanum pennellii in cultivated processing tomato (S. lycopersicum). We screened 45 different double and triple IL-QTL combinations for agricultural yield, to identify QTL pyramids that behaved in an additive manner and were suitable substrate for mendelizing an oligogenic trait. A pyramid of three independent QTL that significantly improved Brix(∗)Yield (BXY - the soluble solids output per unit area) compared to M82 was selected. In the progenies of the tri-hybrid we bred using markers a nearly isogenic 'immortalized F2.' While the common mode of QTL-QTL interactions across the 45 IL-QTLs combinations was less than additive, the three QTLs in the selected triple-stack performed in an additive manner which made it an exceptional material for breeding. This study demonstrates that using the phenotypic effect of all 27 possible QTL-alleles combinations it is possible to make reliable predictions about the genotypes that will maximize the yield.

Genetically based location from triploid populations and gene ontology of a 3.3-mb genome region linked to Alternaria brown spot resistance in citrus reveal clusters of resistance genes

Genetic analysis of phenotypical traits and marker-trait association in polyploid species is generally considered as a challenge. In the present work, different approaches were combined taking advantage of the particular genetic structures of 2n gametes resulting from second division restitution (SDR) to map a genome region linked to Alternaria brown spot (ABS) resistance in triploid citrus progeny. ABS in citrus is a serious disease caused by the tangerine pathotype of the fungus Alternaria alternata. This pathogen produces ACT-toxin, which induces necrotic lesions on fruit and young leaves, defoliation and fruit drop in susceptible genotypes. It is a strong concern for triploid breeding programs aiming to produce seedless mandarin cultivars. The monolocus dominant inheritance of susceptibility, proposed on the basis of diploid population studies, was corroborated in triploid progeny. Bulk segregant analysis coupled with genome scan using a large set of genetically mapped SNP markers and targeted genetic mapping by half tetrad analysis, using SSR and SNP markers, allowed locating a 3.3 Mb genomic region linked to ABS resistance near the centromere of chromosome III. Clusters of resistance genes were identified by gene ontology analysis of this genomic region. Some of these genes are good candidates to control the dominant susceptibility to the ACT-toxin. SSR and SNP markers were developed for efficient early marker-assisted selection of ABS resistant hybrids.

Genetic analysis of recombinant inbred lines for Sorghum bicolor × Sorghum propinquum

We describe a recombinant inbred line (RIL) population of 161 F5 genotypes for the widest euploid cross that can be made to cultivated sorghum (Sorghum bicolor) using conventional techniques, S. bicolor × Sorghum propinquum, that segregates for many traits related to plant architecture, growth and development, reproduction, and life history. The genetic map of the S. bicolor × S. propinquum RILs contains 141 loci on 10 linkage groups collectively spanning 773.1 cM. Although the genetic map has DNA marker density well-suited to quantitative trait loci mapping and samples most of the genome, our previous observations that sorghum pericentromeric heterochromatin is recalcitrant to recombination is highlighted by the finding that the vast majority of recombination in sorghum is concentrated in small regions of euchromatin that are distal to most chromosomes. The advancement of the RIL population in an environment to which the S. bicolor parent was well adapted (indeed bred for) but the S. propinquum parent was not largely eliminated an allele for short-day flowering that confounded many other traits, for example, permitting us to map new quantitative trait loci for flowering that previously eluded detection. Additional recombination that has accrued in the development of this RIL population also may have improved resolution of apices of heterozygote excess, accounting for their greater abundance in the F5 than the F2 generation. The S. bicolor × S. propinquum RIL population offers advantages over early-generation populations that will shed new light on genetic, environmental, and physiological/biochemical factors that regulate plant growth and development.

A genome-wide BAC end-sequence survey of sugarcane elucidates genome composition, and identifies BACs covering much of the euchromatin

BAC-end sequences (BESs) of hybrid sugarcane cultivar R570 are presented. A total of 66,990 informative BESs were obtained from 43,874 BAC clones. Similarity search using a variety of public databases revealed that 13.5 and 42.8 % of BESs match known gene-coding and repeat regions, respectively. That 11.7 % of BESs are still unmatched to any nucleotide sequences in the current public databases despite the fact that a close relative, sorghum, is fully sequenced, indicates that there may be many sugarcane-specific or lineage-specific sequences. We found 1,742 simple sequence repeat motifs in 1,585 BESs, spanning 27,383 bp in length. As simple sequence repeat markers derived from BESs have some advantages over randomly generated markers, these may be particularly useful for comparing BAC-based physical maps with genetic maps. BES and overgo hybridization information was used for anchoring sugarcane BAC clones to the sorghum genome sequence. While sorghum and sugarcane have extensive similarity in terms of genomic structure, only 2,789 BACs (6.4 %) could be confidently anchored to the sorghum genome at the stringent threshold of having both-end information (BESs or overgos) within 300 Kb. This relatively low rate of anchoring may have been caused in part by small- or large-scale genomic rearrangements in the Saccharum genus after two rounds of whole genome duplication since its divergence from the sorghum lineage about 7.8 million years ago. Limiting consideration to only low-copy matches, 1,245 BACs were placed to 1,503 locations, covering ~198 Mb of the sorghum genome or about 78 % of the estimated 252 Mb of euchromatin. BESs and their analyses presented here may provide an early profile of the sugarcane genome as well as a basis for BAC-by-BAC sequencing of much of the basic gene set of sugarcane.

Bioenergy grass feedstock: current options and prospects for trait improvement using emerging genetic, genomic, and systems biology toolkits

For lignocellulosic bioenergy to become a viable alternative to traditional energy production methods, rapid increases in conversion efficiency and biomass yield must be achieved. Increased productivity in bioenergy production can be achieved through concomitant gains in processing efficiency as well as genetic improvement of feedstock that have the potential for bioenergy production at an industrial scale. The purpose of this review is to explore the genetic and genomic resource landscape for the improvement of a specific bioenergy feedstock group, the C4 bioenergy grasses. First, bioenergy grass feedstock traits relevant to biochemical conversion are examined. Then we outline genetic resources available bioenergy grasses for mapping bioenergy traits to DNA markers and genes. This is followed by a discussion of genomic tools and how they can be applied to understanding bioenergy grass feedstock trait genetic mechanisms leading to further improvement opportunities.

Haplotype structure around Bru1 reveals a narrow genetic basis for brown rust resistance in modern sugarcane cultivars

Modern sugarcane cultivars (Saccharum spp., 2n = 100-130) are high polyploid, aneuploid and of interspecific origin. A major gene (Bru1) conferring resistance to brown rust, caused by the fungus Puccinia melanocephala, has been identified in cultivar R570. We analyzed 380 modern cultivars and breeding materials covering the worldwide diversity with 22 molecular markers genetically linked to Bru1 in R570 within a 8.2 cM segment. Our results revealed a strong LD in the Bru1 region and strong associations between most of the markers and rust resistance. Two PCR markers, that flank the Bru1-bearing segment, were found completely associated with one another and only in resistant clones representing efficient molecular diagnostic for Bru1. On this basis, Bru1 was inferred in 86 % of the 194 resistant sugarcane accessions, revealing that it constitutes the main source of brown rust resistance in modern cultivars. Bru1 PCR diagnostic markers should be particularly useful to identify cultivars with potentially alternative sources of resistance to diversify the basis of brown rust resistance in breeding programs.

Genetic dissection of fruit quality traits in the octoploid cultivated strawberry highlights the role of homoeo-QTL in their control

Fruit quality traits are major breeding targets in the Rosaceae. Several of the major Rosaceae species are current or ancient polyploids. To dissect the inheritance of fruit quality traits in polyploid fleshy fruit species, we used a cultivated strawberry segregating population comprising a 213 full-sibling F1 progeny from a cross between the variety 'Capitola' and the genotype 'CF1116'. We previously developed the most comprehensive strawberry linkage map, which displays seven homoeology groups (HG), including each four homoeology linkage groups (Genetics 179:2045-2060, 2008). The map was used to identify quantitative trait loci (QTL) for 19 fruit traits related to fruit development, texture, colour, anthocyanin, sugar and organic acid contents. Analyses were carried out over two or three successive years on field-grown plants. QTL were detected for all the analysed traits. Because strawberry is an octopolyploid species, QTL controlling a given trait and located at orthologous positions on different homoeologous linkage groups within one HG are considered as homoeo-QTL. We found that, for various traits, about one-fourth of QTL were putative homoeo-QTL and were localised on two linkage groups. Several homoeo-QTL could be detected the same year, suggesting that several copies of the gene underlying the QTL are functional. The detection of some other homoeo-QTL was year-dependent. Therefore, changes in allelic expression could take place in response to environmental changes. We believe that, in strawberry as in other polyploid fruit species, the mechanisms unravelled in the present study may play a crucial role in the variations of fruit quality.

A mixed model QTL analysis for sugarcane multiple-harvest-location trial data

Sugarcane-breeding programs take at least 12 years to develop new commercial cultivars. Molecular markers offer a possibility to study the genetic architecture of quantitative traits in sugarcane, and they may be used in marker-assisted selection to speed up artificial selection. Although the performance of sugarcane progenies in breeding programs are commonly evaluated across a range of locations and harvest years, many of the QTL detection methods ignore two- and three-way interactions between QTL, harvest, and location. In this work, a strategy for QTL detection in multi-harvest-location trial data, based on interval mapping and mixed models, is proposed and applied to map QTL effects on a segregating progeny from a biparental cross of pre-commercial Brazilian cultivars, evaluated at two locations and three consecutive harvest years for cane yield (tonnes per hectare), sugar yield (tonnes per hectare), fiber percent, and sucrose content. In the mixed model, we have included appropriate (co)variance structures for modeling heterogeneity and correlation of genetic effects and non-genetic residual effects. Forty-six QTLs were found: 13 QTLs for cane yield, 14 for sugar yield, 11 for fiber percent, and 8 for sucrose content. In addition, QTL by harvest, QTL by location, and QTL by harvest by location interaction effects were significant for all evaluated traits (30 QTLs showed some interaction, and 16 none). Our results contribute to a better understanding of the genetic architecture of complex traits related to biomass production and sucrose content in sugarcane.

Survey of genomics approaches to improve bioenergy traits in maize, sorghum and sugarcane

Bioenergy crops currently provide the only source of alternative energy with the potential to reduce the use of fossil transportation fuels in a way that is compatible with existing engine technology, including in developing countries. Even though bioenergy research is currently receiving considerable attention, many of the concepts are not new, but rather build on intense research efforts from 30 years ago. A major difference with that era is the availability of genomics tools that have the potential to accelerate crop improvement significantly. This review is focused on maize, sorghum and sugarcane as representatives of bioenergy grasses that produce sugar and/or lignocellulosic biomass. Examples of how genetic mapping, forward and reverse genetics, high-throughput expression profiling and comparative genomics can be used to unravel and improve bioenergy traits will be presented.

Em algorithm for mapping quantitative trait Loci in multivalent tetraploids

Multivalent tetraploids that include many plant species, such as potato, sugarcane, and rose, are of paramount importance to agricultural production and biological research. Quantitative trait locus (QTL) mapping in multivalent tetraploids is challenged by their unique cytogenetic properties, such as double reduction. We develop a statistical method for mapping multivalent tetraploid QTLs by considering these cytogenetic properties. This method is built in the mixture model-based framework and implemented with the EM algorithm. The method allows the simultaneous estimation of QTL positions, QTL effects, the chromosomal pairing factor, and the degree of double reduction as well as the assessment of the estimation precision of these parameters. We used simulated data to examine the statistical properties of the method and validate its utilization. The new method and its software will provide a useful tool for QTL mapping in multivalent tetraploids that undergo double reduction.

Genetic mapping of QTLs for sugar-related traits in a RIL population of Sorghum bicolor L. Moench

The productivity of sorghum is mainly determined by quantitative traits such as grain yield and stem sugar-related characteristics. Substantial crop improvement has been achieved by breeding in the last decades. Today, genetic mapping and characterization of quantitative trait loci (QTLs) is considered a valuable tool for trait enhancement. We have investigated QTL associated with the sugar components (Brix, glucose, sucrose, and total sugar content) and sugar-related agronomic traits (flowering date, plant height, stem diameter, tiller number per plant, fresh panicle weight, and estimated juice weight) in four different environments (two locations) using a population of 188 recombinant inbred lines (RILs) from a cross between grain (M71) and sweet sorghum (SS79). A genetic map with 157 AFLP, SSR, and EST-SSR markers was constructed, and several QTLs were detected using composite interval mapping (CIM). Further, additive x additive interaction and QTL x environmental interaction were estimated. CIM identified more than five additive QTLs in most traits explaining a range of 6.0-26.1% of the phenotypic variation. A total of 24 digenic epistatic locus pairs were identified in seven traits, supporting the hypothesis that QTL analysis without considering epistasis can result in biased estimates. QTLs showing multiple effects were identified, where the major QTL on SBI-06 was significantly associated with most of the traits, i.e., flowering date, plant height, Brix, sucrose, and sugar content. Four out of ten traits studied showed a significant QTL x environmental interaction. Our results are an important step toward marker-assisted selection for sugar-related traits and biofuel yield in sorghum.

Molecular cytogenetic investigation of chromosome composition and transmission in sugarcane

Modern sugarcane cultivars (Saccharum spp., 2n = 100-120) are complex polyploids derived from interspecific hybridization performed a century ago between the sugar-producing species S. officinarum L. and the wild species S. spontaneum L. Using genomic in situ hybridization, we revealed that between 15 and 27.5% of the genome of modern cultivars is derived from S. spontaneum, including 10-23% of entire chromosomes from this wild species and 8-13% chromosomes derived from interspecific recombination. We confirmed the occurrence of 2n + n transmission in crosses and first backcrosses between these two species and demonstrated that this also can occur in crosses between S. officinarum and modern cultivars. We analysed five S. officinarum clones with more than 80 chromosomes and demonstrated that they were derived from interspecific hybridization supporting the classical view that this species is characterized by 2n = 80. We also illustrated the complementarities between molecular cytogenetics and genetic mapping approaches for analysing complex genomes.

Genetic studies of "noble cane" for identification and exploitation of genetic markers

Forty genotypes (clones) of sugarcane, including elite lines, commercial cultivars of Saccharum officinarum and clones of S. barberi were fingerprinted with 50 SSR markers using a PCR-based marker assay. Nei's genetic distances for SSR data were determined and relationships between accessions were portrayed graphically in the form of a dendrogram. Genetic distance values ranging from 0.60 to 1.11 were observed among the 40 sugarcane accessions. The shortest genetic distance of 0.60 was seen between genotypes US-804 and US-130. These two genotypes differed from each other only in 10 bands, with 20 primers. The most dissimilar of the accessions were CP-77-400 and US-133, with a genetic distance of 1.11. SSR fingerprints can help sugarcane breeders to clarify the genetic pedigree of commercial sugarcane varieties and evaluate the efficiency of breeding methods.

PCR Primers for identification of high sucrose Saccharum genotypes

The progeny of a cross between high sucrose sugarcane clone S. officinarum 'Gungera' and a low sucrose clone S. spontaneum 'SES 603' resulted in interspecific hybrids that were named as ISH-1 to ISH-29 and graded on the basis of sucrose content. Hybrids ISH-1, ISH-5, ISH-17 and ISH-23 were selected as very high sucrose (65 to 100 mg/g tissue) genotypes, whereas ISH-10, ISH-11, ISH-12 and ISH-25 were very low sucrose (2 to 25 mg/g tissue) genotypes. DNA from leaves of both the parent clones, as also the progeny hybrids, was amplified using selected primers, in order to identify markers for sucrose content. Ten specific primers were examined: primers 'A' and 'B' that detect polymorphism in promoter region of sucrose synthase-2 gene; primers AI, SS and SPS that were designed on the basis of nucleotide sequences of genes for acid invertase, sucrose synthase and sucrose phosphate synthase enzymes, respectively and primers MSSCIR43, MSSCIRI, SMC226CG, SMC1039CG and SCB07 selected for relation to sucrose accumulation process. DNA products specific to low or high sucrose clones were identified. Primer 'A' and AI amplified DNA products of size 230 and 500 bp, respectively only in high sucrose genotypes ('Gungera', ISH-1, ISH-5, ISH-17 and ISH-23), while primer SMC226CG generated a DNA product of size 920 bp only in low sucrose genotypes ('SES 603', ISH-10, ISH-11, ISH-12 and ISH-25). Ten random decamer primers were also examined, but their products did not show relationship to sucrose content of genotypes.

Systemic properties of metabolic networks lead to an epistasis-based model for heterosis

The genetic and molecular approaches to heterosis usually do not rely on any model of the genotype-phenotype relationship. From the generalization of Kacser and Burns' biochemical model for dominance and epistasis to networks with several variable enzymes, we hypothesized that metabolic heterosis could be observed because the response of the flux towards enzyme activities and/or concentrations follows a multi-dimensional hyperbolic-like relationship. To corroborate this, we used the values of systemic parameters accounting for the kinetic behaviour of four enzymes of the upstream part of glycolysis, and simulated genetic variability by varying in silico enzyme concentrations. Then we "crossed" virtual parents to get 1,000 hybrids, and showed that best-parent heterosis was frequently observed. The decomposition of the flux value into genetic effects, with the help of a novel multilocus epistasis index, revealed that antagonistic additive-by-additive epistasis effects play the major role in this framework of the genotype-phenotype relationship. This result is consistent with various observations in quantitative and evolutionary genetics, and provides a model unifying the genetic effects underlying heterosis.

Sugarcane genes associated with sucrose content

BACKGROUND

Sucrose content is a highly desirable trait in sugarcane as the worldwide demand for cost-effective biofuels surges. Sugarcane cultivars differ in their capacity to accumulate sucrose and breeding programs routinely perform crosses to identify genotypes able to produce more sucrose. Sucrose content in the mature internodes reach around 20% of the culms dry weight. Genotypes in the populations reflect their genetic program and may display contrasting growth, development, and physiology, all of which affect carbohydrate metabolism. Few studies have profiled gene expression related to sugarcane's sugar content. The identification of signal transduction components and transcription factors that might regulate sugar accumulation is highly desirable if we are to improve this characteristic of sugarcane plants.

RESULTS

We have evaluated thirty genotypes that have different Brix (sugar) levels and identified genes differentially expressed in internodes using cDNA microarrays. These genes were compared to existing gene expression data for sugarcane plants subjected to diverse stress and hormone treatments. The comparisons revealed a strong overlap between the drought and sucrose-content datasets and a limited overlap with ABA signaling. Genes associated with sucrose content were extensively validated by qRT-PCR, which highlighted several protein kinases and transcription factors that are likely to be regulators of sucrose accumulation. The data also indicate that aquaporins, as well as lignin biosynthesis and cell wall metabolism genes, are strongly related to sucrose accumulation. Moreover, sucrose-associated genes were shown to be directly responsive to short term sucrose stimuli, confirming their role in sugar-related pathways.

CONCLUSION

Gene expression analysis of sugarcane populations contrasting for sucrose content indicated a possible overlap with drought and cell wall metabolism processes and suggested signaling and transcriptional regulators to be used as molecular markers in breeding programs. Transgenic research is necessary to further clarify the role of the genes and define targets useful for sugarcane improvement programs based on transgenic plants.

Evolutionary genetics of genome merger and doubling in plants

Polyploidy is a common mode of evolution in flowering plants. The profound effects of polyploidy on gene expression appear to be caused more by hybridity than by genome doubling. Epigenetic mechanisms underlying genome-wide changes in expression are as yet poorly understood; only methylation has received much study, and its importance varies among polyploids. Genetic diploidization begins with the earliest responses to genome merger and doubling; less is known about chromosomal diploidization. Polyploidy duplicates every gene in the genome, providing the raw material for divergence or partitioning of function in homoeologous copies. Preferential retention or loss of genes occurs in a wide range of taxa, suggesting that there is an underlying set of principles governing the fates of duplicated genes. Further studies are required for general patterns to be elucidated, involving different plant families, kinds of polyploidy, and polyploids of different ages.

Genetic control of yield related stalk traits in sugarcane

A major focus of sugarcane variety improvement programs is to increase sugar yield, which can be accomplished by either increasing the sugar content of the cane or by increasing cane yield, as the correlation between these traits is low. We used a cross between an Australian sugarcane variety Q165, and a Saccharum officinarum accession, IJ76-514, to dissect the inheritance of yield-related traits in the complex polyploid sugarcane. A population of 227 individuals was grown in a replicated field trial and evaluated over 3 years for stalk weight, stalk diameter, stalk number, stalk length and total biomass. Over 1,000 AFLP and SSR markers were scored across the population and used to identify quantitative trait loci (QTL). In total, 27 regions were found that were significant at the 5% threshold using permutation tests with at least one trait; individually, they explained from 4 to 10% of the phenotypic variation and up to 46% were consistent across years. With the inclusion of digeneic interactions, from 28 to 60% of the variation was explained for these traits. The 27 genomic regions were located on 22 linkage groups (LGs) in six of the eight homology groups (HGs) indicating that a number of alleles or quantitative trait alleles (QTA) at each QTL contribute to the trait; from one to three alleles had an effect on the traits for each QTL identified. Alleles of a candidate gene, TEOSINTE BRANCHED 1 (TB1), the major gene controlling branching in maize, were mapped in this population using either an SSR or SNP markers. Two alleles showed some association with stalk number, but unlike maize, TB1 is not a major gene controlling branching in sugarcane but only has a minor and variable effect.

Analysis of genome-wide linkage disequilibrium in the highly polyploid sugarcane

Linkage disequilibrium (LD) in crops, established by domestication and early breeding, can be a valuable basis for mapping the genome. We undertook an assessment of LD in sugarcane (Saccharum spp), characterized by one of the most complex crop genomes, with its high ploidy level (>or=8) and chromosome number (>100) as well as its interspecific origin. Using AFLP markers, we surveyed 1,537 polymorphisms among 72 modern sugarcane cultivars. We exploited information from available genetic maps to determine a relevant statistical threshold that discriminates marker associations due to linkage from other associations. LD is very common among closely linked markers and steadily decreases within a 0-30 cM window. Many instances of linked markers cannot be recognized due to the confounding effect of polyploidy. However, LD within a sample of cultivars appears as efficient as linkage analysis within a controlled progeny in terms of assigning markers to cosegregation groups. Saturating the genome coverage remains a challenge, but applying LD-based mapping within breeding programs will considerably speed up the localization of genes controlling important traits by making use of phenotypic information produced in the course of selection.

Domestication to crop improvement: genetic resources for Sorghum and Saccharum (Andropogoneae)

BACKGROUND

Both sorghum (Sorghum bicolor) and sugarcane (Saccharum officinarum) are members of the Andropogoneae tribe in the Poaceae and are each other's closest relatives amongst cultivated plants. Both are relatively recent domesticates and comparatively little of the genetic potential of these taxa and their wild relatives has been captured by breeding programmes to date. This review assesses the genetic gains made by plant breeders since domestication and the progress in the characterization of genetic resources and their utilization in crop improvement for these two related species.

GENETIC RESOURCES

The genome of sorghum has recently been sequenced providing a great boost to our knowledge of the evolution of grass genomes and the wealth of diversity within S. bicolor taxa. Molecular analysis of the Sorghum genus has identified close relatives of S. bicolor with novel traits, endosperm structure and composition that may be used to expand the cultivated gene pool. Mutant populations (including TILLING populations) provide a useful addition to genetic resources for this species. Sugarcane is a complex polyploid with a large and variable number of copies of each gene. The wild relatives of sugarcane represent a reservoir of genetic diversity for use in sugarcane improvement. Techniques for quantitative molecular analysis of gene or allele copy number in this genetically complex crop have been developed. SNP discovery and mapping in sugarcane has been advanced by the development of high-throughput techniques for ecoTILLING in sugarcane. Genetic linkage maps of the sugarcane genome are being improved for use in breeding selection. The improvement of both sorghum and sugarcane will be accelerated by the incorporation of more diverse germplasm into the domesticated gene pools using molecular tools and the improved knowledge of these genomes.

Resistance gene analogues in sugarcane and sorghum and their association with quantitative trait loci for rust resistance

Fifty-four different sugarcane resistance gene analogue (RGA) sequences were isolated, characterized, and used to identify molecular markers linked to major disease-resistance loci in sugarcane. Ten RGAs were identified from a sugarcane stem expressed sequence tag (EST) library; the remaining 44 were isolated from sugarcane stem, leaf, and root tissue using primers designed to conserved RGA motifs. The map location of 31 of the RGAs was determined in sugarcane and compared with the location of quantitative trait loci (QTL) for brown rust resistance. After 2 years of phenotyping, 3 RGAs were shown to generate markers that were significantly associated with resistance to this disease. To assist in the understanding of the complex genetic structure of sugarcane, 17 of the 31 RGAs were also mapped in sorghum. Comparative mapping between sugarcane and sorghum revealed syntenic localization of several RGA clusters. The 3 brown rust associated RGAs were shown to map to the same linkage group (LG) in sorghum with 2 mapping to one region and the third to a region previously shown to contain a major rust-resistance QTL in sorghum. These results illustrate the value of using RGAs for the identification of markers linked to disease resistance loci and the value of simultaneous mapping in sugarcane and sorghum.

Genetic segregation of microsatellite markers in Saccharum officinarum and S. spontaneum

Genetic mapping techniques can be used to study the interaction between two different genomes after hybridization. This study investigated a Saccharum officinarum (Green German or GG, 2n approximately 11x approximately 110) x S. spontaneum (IND 81-146 or IND, 2n approximately 7x approximately 56) interspecific cross. Segregation of 193 microsatellite (SSR) loci was evaluated in the F(1) progeny of 169 full-sibs of the cross. Following the two-way pseudo-testcross strategy and 'cross pollination' population type, linkage groups (LG) and phases were established for each parent map, using the criteria of LOD score > or = 3.0 and a maximum recombination frequency of 0.35. Of the 193 markers analyzed, 61 were IND-specific, 106 were GG-specific, and 26 were heterozygous in both parents. About 78% of the markers segregated in a Mendelian fashion and 22% were distorted (as evaluated by chi(2)-tests, P < or = 0.01). The GG map included 91 marker loci arranged into 25 LG covering 1180 cM of the officinarum genome. The IND map consisted of 46 marker loci assembled into 10 LG, which spanned 614 cM of the spontaneum genome. A specific chromosome associated with segregation distortion was detected in the female (GG) genome only, probably as a result of double reduction. The segregation patterns of the marker loci indicated a centromere-driven distortion process with the shared allelic markers (as putative centromeres) regulating the placement and association of markers with opposite phase (coupling vs repulsion) and dosage on either side. Although incomplete, the framework maps were informative with respect to segregation distortion, chromosome fusion, rearrangements, and translocations, observed in both parental genomes as a result of their merger.