Toward real-world sequencing by microdevice electrophoresis

A new microfluidic device for separating circulating tumor cells based on their physical properties by using electrophoresis and dielectrophoresis forces within an electrical field

BACKGROUND AND OBJECTIVE

The presence of circulating tumor cells in the patient's blood is a clinical factor that indicates the initiation of metastasis.

METHODS

In this paper, a microfluidic device is designed to separate, enumerate, and to diagnose cancer cells from the patient's blood sample. Here, we present a new microfluidic device that is capable of separating circulating tumor cells based on their physical properties by using electrophoresis and dielectrophoresis forces within an electrical field. Cells are modeled as spherical particles, each size as a representor of different cells.

RESULTS

The distance between cells has been increased, and by using a novel method of rolling up the convergent and divergent channels, the primary distance of elements, which was 50 µm, reached 142-178.5. Cells with different diameters sense a different force, and therefore, cancer cells can be separating from other cells in the blood, such as white blood cells. To make the current device, practical for clinical studies, a cell enumerator is designed for downstream of cell separator. In the cell enumerator, a change in impedance occurs when a cell passes through the sensor.

CONCLUSIONS

By measuring the electrical current between two electrodes of the cell enumerator sensor, the exact count of cells can be obtained.

[Next generation sequencing technologies (NGST) -- development and applications]

In the past ten years the development of next generation sequencing technologies brought a new era in the field of quick and efficient DNA sequencing. In our study we give an overview of the methodological achievements from Sanger's chain-termination sequencing in 1975 to those allowing real-time DNA sequencing today. Sequencing methods that utilize clonal amplicons for parallel multistrand sequencing comprise the basics of currently available next generation sequencing techniques. Nowadays next generation sequencing is mainly used for basic research in functional genomics, providing quintessential information in the meta-analyses of data from signal transduction pathways, onthologies, proteomics and metabolomics. Although next generation sequencing is yet sparsely used in clinical practice, cardiology, oncology and epidemiology already show an immense need for the additional knowledge obtained by this new technology. The main barrier of its spread is the lack of standardization of analysis evaluation methods, which obscure objective assessment of the results.

PMMA/PDMS valves and pumps for disposable microfluidics

Poly(methyl methacrylate) (PMMA) is gaining in popularity in microfluidic devices because of its low cost, excellent optical transparency, attractive mechanical/chemical properties, and simple fabrication procedures. It has been used to fabricate micromixers, PCR reactors, CE and many other microdevices. Here we present the design, fabrication, characterization and application of pneumatic microvalves and micropumps based on PMMA. Valves and pumps are fabricated by sandwiching a PDMS membrane between PMMA fluidic channel and manifold wafers. Valve closing or opening can be controlled by adjusting the pressure in a displacement chamber on the pneumatic layer via a computer regulated solenoid. The valve provides up to 15.4 microL s(-1) at 60 kPa fluid pressure and seals reliably against forward fluid pressure as high as 60 kPa. A PMMA diaphragm pump can be assembled by simply connecting three valves in series. By varying valve volume or opening time, pumping rates ranging from nL to microL per second can be accurately achieved. The PMMA based valves and pumps were further tested in a disposable automatic nucleic acid extraction microchip to extract DNA from human whole blood. The DNA extraction efficiency was about 25% and the 260 nm/280 nm UV absorption ratio for extracted DNA was 1.72. Because of its advantages of inexpensive, facile fabrication, robust and easy integration, the PMMA valve and pump will find their wide application for fluidic manipulation in portable and disposable microfluidic devices.

DNA sequencing and multiplex STR analysis on plastic microfluidic devices

The ability of plastic microfluidic devices with separation channel lengths of 6, 10 or 18 cm to perform high-quality and high-performance ssDNA analysis was evaluated. Specifically, four-color DNA sequencing separation of a terminator sequencing standard using replaceable, urea-denaturing linear polyacrylamide (LPA) solution as a sieving matrix, yielded read lengths of 410 bases in 15 min with base calling accuracy of 99.2% on a 6-cm device, and 640 bases in 35 min with accuracy of 98.0% on a 18-cm device. A two-color sizing analysis of four-locus (CSF1PO, TPOX, TH01, vWA) short tandem repeats (STRs) allelic ladder on a 10-cm device indicated a mean SD of +/- 0.08 base pairs (bp) between runs, and single bp resolution of spiked TH01 allele 9.3 (198 bp) from TH01 allele 10 (199 bp) of the CTTv ladder with R = 0.81. A four-color multiplex sizing analysis of three different AmpFlSTR allelic ladders consisting of nine loci (D3S1358, vWA, FGA, D8S1179, D21S11, D18S51, D5S818, D13S317, D7S820) and gender alleles (Amelogenin) on a 10-cm device had a mean SD of +/- 0.15 bp between runs for sizing three loci, i.e., FGA, D18S51 and D3S818; alleles differing by 2 bp in size were resolved with resolutions close to baseline. This work demonstrates that plastic microfluidic devices are capable of quality sequencing and STR sizing comparable to that of glass devices of similar separation lengths.

Scale-up development of high-performance polymer matrix for DNA sequencing analysis

Linear polyacrylamide (LPA) has been widely used as a replaceable separation matrix in CE. An increase in the molecular weight of the separation medium favors the separation of larger DNA fragments. In order to obtain ultrahigh-molecular-weight (UHMW) LPA, a "frozen" method was developed to synthesize the LPA homopolymer. This approach has three major advantages when compared with other existing routes of LPA synthesis: (i) long LPA chains could be obtained easily, with their average molecular weight (MW) being in the high 10 MDa range; (ii) the desired MW could be adjusted over a broad range by controlling the temperature and the concentration of initiators during synthesis; (iii) the product solution contains only a tiny amount of impurity besides the solvent and LPA. Both static and dynamic laser light scattering measurements were carried out to characterize the synthesized LPA in the buffer solution. The DNA sequencing matrix prepared from LPA using this method was studied and the results were compared with the newly developed commercial product POP7 from Applied Biosystems. It should be noted that this approach can be applied to synthesize other water-soluble polymers, resulting in UHMW products because the chain transfer constant is smaller at lower temperatures.

Multicolor Fluorescence Detection on an Electrophoretic Microdevice Using an Acoustooptic Tunable Filter

An acoustooptic tunable filter (AOTF) is used to detect multiple fluorescent signals on a fluidic microdevice. A confocal laser-induced fluorescence detection setup is used to excite fluorescent dyes in glass microchannels, presenting a streamlined and robust detection system consisting of the narrow-bandwidth AO filter and a single photodetector. The flexibility of the filter is demonstrated by alternating between wavelengths for precise microchannel alignment and sweeping through a range of wavelengths for preliminary spectral characterization of subnanoliter probe volumes of target analytes. The AOTF is also coupled with an electrophoretic separation for the multicolor detection of PCR-amplified DNA against a labeled sizing standard, the discrimination of multiple amplicons overlapped in time, and the identification of amplified biowarfare agents in a fluorescent spiking experiment. Finally, to demonstrate the multicolor capability of the system, 19-wavelength detection is performed during the separation of a three-dye sample mixture.

Emerging technologies in DNA sequencing

Demand for DNA sequence information has never been greater, yet current Sanger technology is too costly, time consuming, and labor intensive to meet this ongoing demand. Applications span numerous research interests, including sequence variation studies, comparative genomics and evolution, forensics, and diagnostic and applied therapeutics. Several emerging technologies show promise of delivering next-generation solutions for fast and affordable genome sequencing. In this review article, the DNA polymerase-dependent strategies of Sanger sequencing, single nucleotide addition, and cyclic reversible termination are discussed to highlight recent advances and potential challenges these technologies face in their development for ultrafast DNA sequencing.

Applications of capillary electrophoresis on microchip

CE on microchip is an emerging separation technique that has attracted wide attention and gained considerable popularity. Because of miniaturization of the separation format, CE on chip typically offers shorter analysis time and lower reagent consumption with potential development of portable analytical instrumentation. This review with 143 references is focused on proteins and peptides analysis, DNA separation including fragment sizing, genotyping, mutation detection and sequencing, and also the analysis of low-molecular-weight compounds, namely explosive residues and warfare agents, pharmaceuticals and drugs of abuse, and various small molecules in body fluids.

Multiplexed fluorescence detection in microfabricated devices with both time-resolved and spectral-discrimination capabilities using near-infrared fluorescence

We examined the feasibility of using a two-color time-resolved detection scheme with microdevices for DNA sequencing applications. A home-built dual-color optical-fiber-based time-resolved near-infrared (IR) fluorescence microscope successfully coupled lifetime discrimination with color discrimination, increasing fluorescence multiplexing capabilities. The instrument was constructed by using two pulsed-diode lasers (680/780-nm excitation) and two avalanche photodiodes as the basic building blocks. The data were processed using electronics configured in a time-correlated single-photon counting format. The use of near-IR fluorescence detection greatly simplified the hardware and allowed low detection limits (< 0.1nM). We examined the separation of a single-base tract on a microchip and compared the performance with that of conventional capillary gel electrophoresis. The microchip was fabricated in glass and contained an effective separation length of 7.0 cm. It was found that, without incorporating a solid-phase reversible immobilization cleanup procedure, the calculated lifetime of the dye label on the microchip was longer and the standard deviation was larger than those of the same sample analyzed using capillary electrophoresis. Using cleanup steps, the accuracy and precision of the measurements improved. Lifetimes of four near-IR dyes (AlexaFluor680, IRD700, IRD800, and IRD40) used in this study were determined to be 986 ps (RSD=2.1%), 1551 ps (RSD=1.8%), 520 ps (RSD=3.3%), and 788 ps (RSD=4.9%), respectively, in a microchannel filled with poly(dimethylacrylamide) (POP-6) gel. The lifetimes calculated using maximum likelihood estimators provided favorable precision on the microchip, where small numbers of photocounts were collected. An M13mp18 template was sequenced on the microchip using a two-color two-lifetime format with POP-6 as the sieving polymer. Read lengths of 294 bp with calling accuracies of 90.8 and 83.7% were achieved in each color channel. The relatively low calling accuracy and the short read length resulted primarily from the short separation channel, which yielded low electrophoretic resolution.

Near-infrared time-resolved fluorescence lifetime determinations in poly(methylmethacrylate) microchip electrophoresis devices

High aspect-ratio microstructures were hot-embossed in polymer substrates with a molding tool fabricated using lithography/electroplating/forming (LIGA). The resulting devices were used for the electrophoretic separation of oligonucleotides labeled with near-infrared (near-IR) dyes. Near-IR time-resolved fluorescence was used as an identification method for the labeling dyes. The detection apparatus consisted of a pulsed laser diode operating at 680 nm, a single-photon avalanche diode, an integrated microscope, and a PC-board incorporating time-correlated single photon counting electronics. Investigation of the optical quality and amount of autofluorescence generated from different polymer substrates was carried out in the near-IR region for determining compatibility with time-resolved fluorescence. Our results revealed that of several poly(methylmethacrylate)(PMMA) substrates, brand Plexiglas offered minimal replication errors in the embossed features using appropriate embossing conditions with low background fluorescence contributions to the observed decay. Near-IR dye-labeled oligonucleotides were separated to determine the applicability of fluorescence lifetime discrimination between Cy5.5 (tauf = 930 ps) and IRD700 (tauf = 851 ps) labeling dyes during the microchip separation. These dyes were used to label T-fragments (thymine) of an M13mp18 ssDNA template. The DNA ladders were electrophoresed at 130 V/cm in a 4% linear polyacrylamide gel (LPA) gel matrix in a 9.5 cm long serpentine channel heated to 50 degrees C. The electropherogram revealed that the lifetimes could be accurately read well beyond 450 bases, although single-base pair resolution in the electropherogram was difficult to achieve due to potential solute-wall interactions in the polymer microdevice or the electroosmotic flow (EOF) properties of the device. The relative standard deviations secured for individual bands in the electropherogram were similar to those obtained using capillary gel electrophoresis, in spite of the lower load volume.

Parallel separations of oligonucleotides with optically gated sample introduction on multichannel microchips

With the release of the human genome sequence, there has been increasing attention given to other genetic analyses, including the detection of genetic variations and fast sequencing of multiple samples for pharmacogenomics studies. Rapid injections of samples in multiplexed separation channels by optically gated sample introduction are shown here for DNA separation. Serial separations of four amino acids are shown in less than four seconds on a microchip with four multiplexed channels. Five short oligonucleotides have also been rapidly separated in 2% LPA with four channels using this technique. In addition, multiple unique samples have been simultaneously separated and five-base resolution has been demonstrated.

High-speed DNA sequencing by tube-based capillary electrophoresis

We assessed the feasibility of high-speed DNA sequencing by tube-based capillary electrophoresis (TCE) with electrokinetic sample injections. We developed a water-circulated TCE system to control the capillary temperature precisely. Using this system and a ready-made sieving matrix at 50 degrees C, single-stranded DNA size marker fragments were separated at various pairs of the electric field strength, E, of 128-480 V/cm and the capillary effective length, L, of 100-360 mm. Assuming the read length (RL) is the fragment size at which the peak width equals the peak interval per base in obtained electropherograms, we estimated the values of RL (E, L), the RL at the pair (E, L). The points in ELz-space, (E, L, RL(E, L)), form a curved surface expressed by z = RL(E, L). Analyzing the contour lines of this curved surface, we determined the pairs of E and L providing target RLs of 300-500 bases within a minimum time. At a pair optimized for a 500-base RL (330 V/cm, 200 mm), one-color sequencing fragments were successfully separated up to 529 bases within 9.6 min. These results demonstrate that high-speed DNA sequencing comparable with that obtained by microfabricated chip-based capillary electrophoresis (MCE) can be achieved with TCE, which is more suitable in automation than MCE.

Solid-phase reversible immobilization in microfluidic chips for the purification of dye-labeled DNA sequencing fragments

In this manuscript, we discuss the use of photoactivated polycarbonate (PC) for purification of dye-labeled terminator sequencing fragments using solid-phase reversible immobilization (SPRI) prior to gel electrophoretic sorting of these DNAs. An immobilization bed for the DNA purification was produced by exposing a posted microchannel to UV radiation, which induced a surface photooxidation reaction, resulting in the production of carboxylate groups. The immobilization microchannel contained microposts to increase the loading level of DNAs to improve signal intensity without the need for preconcentration. By suspending the sequencing cocktail in an immobilization buffer (TEG/ethanol), the DNA fragments demonstrated a high affinity for this carboxylated surface. The loading density of DNAs to this activated surface was found to be 3.9 pmol cm(-2). The captured DNA could be subsequently released from the surface by incubation with ddH2O. SPRI cleanup of dye-terminator sequencing fragments using the photoactivated PC chip and slab gel electrophoresis produced a read length comparable to the conventional SPRI format, which utilized carboxylated magnetic beads and a magnetic field. The read length for the PC-SPRI format was found to be 620 bases with a calling accuracy of 98.9%. The PC-SPRI cleanup format was also integrated to a capillary gel electrophoresis (CGE) system. The PC-SPRI method was shown to effectively remove excess dye terminator from the CGE tract, but yielded lower plate numbers, as compared to a direct injection method with purification accomplished off-chip. The loss in efficiency was found to result primarily from the extended injection time associated with the microchip purification method.

Microfluidic devices for DNA sequencing: sample preparation and electrophoretic analysis

Modern DNA sequencing 'factories' have revolutionized biology by completing the human genome sequence, but in the race to completion we are left with inefficient, cumbersome, and costly macroscale processes and supporting facilities. During the same period, microfabricated DNA sequencing, sample processing and analysis devices have advanced rapidly toward the goal of a 'sequencing lab-on-a-chip'. Integrated microfluidic processing dramatically reduces analysis time and reagent consumption, and eliminates costly and unreliable macroscale robotics and laboratory apparatus. A microfabricated device for high-throughput DNA sequencing that couples clone isolation, template amplification, Sanger extension, purification, and electrophoretic analysis in a single microfluidic circuit is now attainable.

Copolymer solutions as separation media for DNA capillary electrophoresis

A review on copolymers used as DNA separation media in capillary electrophoresis is presented. Copolymers can combine the desirable properties of different monomers, yielding many attractive features, such as high sieving ability, low viscosity, self-assembly behavior and dynamic coating ability. Copolymers with different molecular architecture, including block copolymers, random copolymers, and graft copolymers, have been developed and tested as DNA separation media with unique and tailored properties that cannot be achieved easily by using only homopolymers.

DNA analysis on microfabricated electrophoretic devices with bubble cells

Microfluidic devices with bubble cells have been fabricated on poly(methyl methacrylate) (PMMA) plates and have been employed for the analysis of DNA using polyethylene oxide (PEO) solutions. First, the separation channel was fabricated using a wire-imprinting method. Then, wires with greater sizes or a razor blade glued in a polycarbonate plate was used to fabricate bubble cells, with sizes of 190-650 microm. The improvements in resolution and sensitivity have been achieved for large DNA (> 603 base pair, bp) using such devices, which depend on the geometry of the bubble cell. The main contributor for optimal resolution is mainly due to DNA migration at lower electric field strengths inside the bubble cell. On the other hand, slight losses of resolution for small DNA fragments have been found mainly due to diffusion, supported by the loss of resolution when separating two small solutes. With a bubble cell of 75 microm (width) x 500 microm (depth), the sensitivity improvement up to 17-fold has been achieved for the 271 bp fragment in the separation of PhiX-174/HaeIII DNA restriction fragments. We have also found that a microfluidic device with a bubble cell of 360 microm x 360 microm is appropriate for DNA analysis. Such a device has been used for separating DNA ranging from 8 to 2176 bp and polymerase chain reaction (PCR) products amplified after 30 cycles, with rapidity and improvements in the sensitivity as well as resolution.

Microfluidic chips for clinical and forensic analysis

This review gives an overview of developments in the field of microchip analysis for clinical diagnostic and forensic applications. The approach chosen to review the literature is different from that in most microchip reviews to date, in that the information is presented in terms of analytes tested rather than microchip method. Analyte categories for which examples are presented include (i) drugs (quality control, seizures) and explosives residues, (ii) drugs and endogenous small molecules and ions in biofluids, (iii) proteins and peptides, and (iv) analysis of nucleic acids and oligonucleotides. Few cases of microchip analysis of physiological samples or other "real-world" matrices were found. However, many of the examples presented have potential application for these samples, especially with ongoing parallel developments involving integration of sample pretreatment onto chips and the use of fluid propulsion mechanisms other than electrokinetic pumping.

New DNA sequencing methods

The Human Genome Project and other major genomic sequencing projects have pushed the development of sequencing technology. In the past six years alone, instrument throughput has increased 15-fold. New technologies are now on the horizon that could yield massive increases in our capacity for de novo DNA sequencing. This review presents a summary of state-of-the-art technologies for genomic sequencing and describes technologies that may be candidates for the next generation of DNA sequencing instruments.

Sequence variation in genes and genomic DNA: methods for large-scale analysis

The large-scale typing of sequence variation in genes and genomic DNA presents new challenges for which it is not clear that current technologies are sufficiently sensitive, robust, or scalable. This review surveys the current platform technologies: separation-based approaches, which include mass spectrometry; homogeneous assays; and solid-phase/array-based assays. We assess techniques for discovering and typing variation on a large scale, especially that of single-nucleotide polymorphisms. The in-depth focus is the DNA chip/array platform, and some of the published large-scale studies are closely examined. The problem of large-scale amplification is addressed, and emerging technologies for present and future needs are indicated.

An integrated fritless column for on-chip capillary electrochromatography with conventional stationary phases

A new polymer device for use with conventional particulate stationary phases for on-chip, fritless, capillary electrochromatography (CEC) has been realized. The structure includes an injector and a tapered column in which the particles of the stationary phase are retained and stabilized. The chips were easily fabricated in poly(dimethylsiloxane) using deep-reactive-ion-etched silicon masters, and tested using a capillary electrophoretic separation of FITC-labeled amino acids. To perform CEC, the separation channel was packed using a vacuum with 3-microm, octadecylsilanized silica microspheres. The packing was stabilized in the column by a thermal treatment, and its stability and quality were evaluated using in-column indirect fluorescence detection. The effects of voltage on electro-osmotic flow and on efficiency were investigated, and the separation of two neutral compounds was achieved in less than 15 s.

High-performance genetic analysis using microfabricated capillary array electrophoresis microplates

This review focuses on some recent advances in realizing microfabricated capillary array electrophoresis (microCAE). In particular, the development of a novel rotary scanning confocal fluorescence detector has facilitated the high-speed collection of sequencing and genotyping data from radially formatted microCAE devices. The concomitant development of a convenient energy-transfer cassette labeling chemistry allows sensitive multicolor labeling of any DNA genotyping or sequencing analyte. High-performance hereditary haemochromatosis and short tandem repeat genotyping assays are demonstrated on these devices along with rapid mitochondrial DNA sequence polymorphism analysis. Progress in supporting technology such as robotic fluid dispensing and batched data analysis is also presented. The ultimate goal is to develop a parallel analysis platform capable of integrated sample preparation and automated electrophoretic analysis with a throughput 10-100 times that of current technology.

Sample purification on a microfluidic device

Sample preparation has long been recognized as a significant barrier to the implementation of macroscopic protocols on microfabricated devices. Macroscopically, such tasks as removing salts, primers and other contaminants are performed by methods involving precipitation, specialized membranes and centrifuges, none of which are readily performed in microfluidic structures. Although some microfluidic systems have been developed for performing sample purification, their complexity may hinder the degree to which they can be implemented. We present a method of microchip-based sample purification that can be performed with even the simplest microfluidic designs. The technique is demonstrated by removing primers from a sample of amplified DNA, leaving only the product DNA. This provides a new sample preparation capability for microfluidic systems.

DNA sequencing by capillary electrophoresis using copolymers of acrylamide and N,N-dimethylacrylamide

Copolymers of acrylamide (AM) and N,N-dimethylacrylamide (DMA) with AM to DMA molar ratios of 3:1, 2:1 and 1:1 and molecular weights of about 2.2 MDa were synthesized. The polymers were tested as separation media in DNA sequencing analysis by capillary electrophoresis (CE). The dynamic coating ability of polydimethylacrylamide (PDMA) and the hydrophilicity of polyacrylamide (PAM) have been successfully combined in these random copolymers. A separation efficiency of over 10 million theoretical plates per meter has been reached by using the bare capillaries without the additional polymer coating step. Under optimized separation conditions for longer read length DNA sequencing, the separation ability of the copolymers decreased with decreasing AM to DMA molar ratio from 3:1, 2:1 and 1:1. In comparison with PAM, the copolymer with a 3:1 AM:DMA ratio showed a higher separation efficiency. By using a 2.5% w/v copolymer with 3:1 AM:DMA ratio, one base resolution of 0.55 up to 699 bases and 0.30 up to 963 bases have been achieved in about 80 min at ambient temperatures.

Microfluidic arrays in genetic analysis

The goal of genetic analysis is to discover genetic markers that are informative for providing high confidence, positive predictive value in managing phenotypic outcomes. Primary consensus sequence data, genetic polymorphism databases and associated phenotype data are rapidly making genetic analysis more useful. Therefore, genetic analysis applications are gradually becoming more mainstream. The diversity and complexity of genetic analysis currently requires an array of analytical techniques, instrument platforms and software to support all the steps from data acquisition to interpretation. As supporting research technologies mature, they are incorporating increasing levels of automation, system integration and miniaturization. Microfluidic arrays are positioned to play a key role in routine genetic analysis, particularly as they begin to appear in more fully integrated analytical platforms.

A Closed-Cycle Capillary Polymerase Chain Reaction Machine

A novel thermocycling machine based on a microcapillary equipped with bidirectional pressure-driven flow and in situ optical position sensors is described. A 1-microL droplet of reaction mixture moves between three heat zones in a 1-mm-i.d., oil-filled capillary using a multielement scattered light detector and active feedback. Dwell times and accelerations can be adjusted independently. As a demonstration of the device, 30 cycles of a 500-base pair product were performed in 23 min with 78% amplification efficiency. This result compares well with previous high-speed thermocyclers. Theoretically, the arrangement can approach a time of 2.5 min for 30 cycle amplifications of a 500-base pair product.

An artificial primosome: design, function, and applications

Double-stranded (ds) DNA is capable of the sequence-specific accommodation of an additional oligodeoxyribonucleotide strand by the peptide nucleic acid(PNA)-assisted formation of a so-called PD-loop. We demonstrate here that the PD-loop may function as an artificial primosome within linear, nonsupercoiled DNA duplexes. DNA polymerase with its strand displacement activity uses this construct to initiate the primer extension reaction at a designated dsDNA site. The primer is extended by several hundred nucleotides. The efficiency of dsDNA priming by the artificial primosome assembly is comparable to the single-stranded DNA priming used in various assays. The ability of the PD-loop structure to perform like an artificial primosome on linear dsDNA may find applications in biochemistry, molecular biology, and molecular biotechnology, as well as for DNA diagnostics. In particular, multiple labels can be incorporated into a chosen dsDNA site resulting in ultrasensitive direct quantification of specific sequences. Furthermore, nondenaturing dsDNA sequencing proceeds from the PD-loop. This approach opens the way to direct isothermal reading of the DNA sequence against a background of unrelated DNA, thereby eliminating the need for purification of the target DNA.

Microchannel DNA sequencing matrices with a thermally controlled "viscosity switch"

Polymers and hydrogels that swell or shrink in response to environmental stimuli such as changes in temperature, pH, or ionic strength are of interest as switchable materials for applications in biotechnology. In this paper, we show that thermoresponsive polymers offer some particular advantages as entangled matrices for DNA sequencing by capillary and microchip electrophoresis. Matrices based on conventional water-soluble polymers demand a compromise in their design for microchannel electrophoresis: whereas highly entangled solutions of high molar mass polymers provide optimal sequencing performance, their highly viscous solutions require application of high pressures to be loaded into electrophoresis microchannels. Here, we demonstrate the reproducible synthesis, precise characterization, and excellent DNA sequencing performance of high molar mass, thermoresponsive polymer matrices that exhibit a reversible, temperature-controlled "viscosity switch" from high-viscosity solutions at 25 degrees C to low-viscosity, microphase-separated colloidal dispersions at a chosen, elevated temperature. The viscosity switch decouples matrix loading and sieving properties, enabling acceleration of microchannel flow by 3 orders of magnitude. DNA sequencing separations yielding read lengths of 463 bases of contiguous sequence in 78 min with 97% base-calling accuracy can be achieved in these matrices. Switchable matrices will be particularly applicable to microfluidic devices with dynamic temperature control, which are likely to provide the next major leap in the efficiency of high-throughput DNA analysis.

Recent developments in electrokinetically driven analysis on microfabricated devices

This review is devoted to the rapid developments in the field of microfluidic separation devices in which the flow is electrokinetically driven, and where the separation element forms the heart of the system, in order to give an overview of the trends of the last three years. Examples of microchip layouts that were designed for various application areas are given. Optimization of mixing and injection strategies, designs for the handling of multiple samples, and capillary array systems show the enormous progress made since the first proof-of-concept papers about lab-on-a-chip devices. Examples of functional elements for on-chip preconcentration, filtering, DNA amplification and on-chip detection indicate that the real integration of various analytical tasks on a single microchip is coming into reach. The use of materials other than glass, such as poly(dimethylsiloxane) and polymethylmethacrylate, for chip fabrication and detection methods other than laser-induced fluorescence (LIF) detection, such as mass spectrometry and electrochemical detection, are described. Furthermore, it can be observed that the separation modes known from capillary electrophoresis (CE) in fused-silica capillaries can be easily transferred to the microchip platform. The review concludes with an overview of applications of microchip CE and with a brief outlook.

Automation for genomics, part two: sequencers, microarrays, and future trends

Automation for genomics has enabled a 43-fold increase in the total finished human genomic sequence in the world in the past four years. This is the second half of a two-part, noncomprehensive review that presents an overview of different types of automation equipment used in genome sequencing. The first part of the review, published in the previous issue, focused on automated procedures used to prepare DNA for sequencing or analysis. This second part of the review presents a look at available DNA sequencers and array technology and concludes with a look at future technologies. Alternate sequencing technologies including mass spectrometry, biochips, and single molecule analysis are included in this review.

Optimization of high-performance DNA sequencing on short microfabricated electrophoretic devices

We have examined the parametric performance of short microfabricated electrophoresis devices that operate with a replaceable linear poly(acrylamide) (LPA) solution for the application of DNA sequencing. A systematic study is presented of the dependence of selectivity, separation efficiency, and resolution of sequencing fragments on buffer composition, LPA concentration, LPA composition, microdevice temperature, electric field, and device length. A specific optimization is made for DNA sequencing on 11.5-cm devices. Using a separation matrix composed of 3.0% (w/w) 10 MDa plus 1.0% (w/w) 50 kDa LPA, elevated microdevice temperature (50 degrees C), and 200 V/cm, high-speed DNA sequencing of 580 bases on standard M13mp18 was obtained in only 18 min with a base-calling accuracy of 98.5%. Read lengths of 640 bases at 98.5% accuracy were achieved in approximately 30 min by reducing the electric field strength to 125 V/cm. We believe that this constitutes matrix-limited performance for microdevices of this length using LPA sieving matrix and this buffer chemistry. In addition, it was confirmed, that shorter devices are rather impractical for production sequencing applications when LPA is used as sieving matrix.

Eight hundred-base sequencing in a microfabricated electrophoretic device

The human genome will be sequenced using capillary array electrophoresis technology. Although currently achieving only 550 base reads per run, capillary arrays have increased the efficiency and lowered the cost of sequencing by eliminating gel plate preparation, reducing sample volumes, and offering automation and speed. However, much higher throughput and greater cost reductions are needed. The next major advancement in sequencing technology is expected from the development of arrays of microfabricated channels in a plate or "chip" format. For de novo sequencing, the practical utility of the microdevice approach has been limited by device length to a read of 500-600 bases per run. We demonstrate a significant milestone for a microfabricated device by obtaining an average read length of 800 bases in 80 min (98% accuracy) for either M13 standards or DNA sequencing samples from the Whitehead Institute Center for Genomic Research (WICGR) production line. This result is achieved in 40-cm-long channels using a new class of large-scale microfabricated devices. Both microfabrication of extended structures and achievement of long reads are essential steps toward a 384-lane very-large-scale microfluidic (VLSMF) system for ultrahigh-throughput DNA sequencing analysis, currently under construction in our laboratory.

Automated parallel DNA sequencing on multiple channel microchips

We report automated DNA sequencing in 16-channel microchips. A microchip prefilled with sieving matrix is aligned on a heating plate affixed to a movable platform. Samples are loaded into sample reservoirs by using an eight-tip pipetting device, and the chip is docked with an array of electrodes in the focal plane of a four-color scanning detection system. Under computer control, high voltage is applied to the appropriate reservoirs in a programmed sequence that injects and separates the DNA samples. An integrated four-color confocal fluorescent detector automatically scans all 16 channels. The system routinely yields more than 450 bases in 15 min in all 16 channels. In the best case using an automated base-calling program, 543 bases have been called at an accuracy of >99%. Separations, including automated chip loading and sample injection, normally are completed in less than 18 min. The advantages of DNA sequencing on capillary electrophoresis chips include uniform signal intensity and tolerance of high DNA template concentration. To understand the fundamentals of these unique features we developed a theoretical treatment of cross-channel chip injection that we call the differential concentration effect. We present experimental evidence consistent with the predictions of the theory.

Microchip electrophoresis: a method for high-speed SNP detection

As a trial practical application, we have applied optimized microfabricated electrophoresis devices, combined with enzymatic mutation detection methods, to the determination of single nucleotide polymorphism (SNP) sites in the p53 suppressor gene. Using clinical samples, we have achieved robust assays with quality factors as good as conventional electrophoresis in approximately 100 s. This is 10 and 50 times faster than capillary and slab gel electro-phoresis, respectively. The method was highly accurate with an average error of mutation site measurement of only +/-5 bp. No clean-up of the digestion mixtures was needed prior to injection. This greatly simplifies sample handling relative to capillary instruments, which is important for high-throughput screening applications. Following identification, absolute mutation determination of the screened samples was achieved in a second microdevice optimized for four-color DNA sequencing. Total run time was 25 min in this second device and sequencing data were in full agreement with ABI Prism 377 sequencing runs which required 3.5 h. The tandem application of microdevices for location then full characterization of SNPs appears to confirm many of the improvements claimed for future application of microdevices in practical scaled screening for mutational analysis.