Zinc nanostructures for oxygen scavenging

In this work, oxidation of carbon supported Zn nanostructures was studied to elucidate their utilization as oxygen scavenging materials activated by the relative humidity in the environment. Moisture-activated nano-scavengers were produced on carbon substrates using magnetron sputtering attaining nano-islands (nanoparticles), randomly distributed on the carbon surface, with arbitrary crystallographic orientations. They possess a Zn-ZnO core-shell structure, caused by surface passivation, which provides them with a self-assembled protective layer that prevents complete oxidation of nanoparticles prior to utilization. The oxidation rate is independent of the nanoparticle size and orientation, for particles between 5 and 18 nm. The oxidation kinetics are not in complete agreement with the Cabrera and Mott theory. When exposed to a high relative humidity environment, an acceleration in the oxidation process is observed, dissolving the Zn nanoparticles and forming a layer on the carbon, which facilitates the consumption of the Zn to form ZnO. These results support the idea of its potential use in applications where high RH environments are required, such as food packaging.

Interrogation of bimetallic particle oxidation in three dimensions at the nanoscale

An understanding of bimetallic alloy oxidation is key to the design of hollow-structured binary oxides and the optimization of their catalytic performance. However, one roadblock encountered in studying these binary oxide systems is the difficulty in describing the heterogeneities that occur in both structure and chemistry as a function of reaction coordinate. This is due to the complexity of the three-dimensional mosaic patterns that occur in these heterogeneous binary systems. By combining real-time imaging and chemical-sensitive electron tomography, we show that it is possible to characterize these systems with simultaneous nanoscale and chemical detail. We find that there is oxidation-induced chemical segregation occurring on both external and internal surfaces. Additionally, there is another layer of complexity that occurs during the oxidation, namely that the morphology of the initial oxide surface can change the oxidation modality. This work characterizes the pathways that can control the morphology in binary oxide materials.

Understanding bimetallic alloy oxidation is key to design of hollow-structured binary oxides and their optimization for applications, e.g., as catalysts. Here the authors combine real-time imaging and chemically-sensitive electron tomography to uncover unexpected complexity in possible morphological outcomes of bimetallic oxidation.

On the magnetic properties of iron nanostructures fabricated via focused electron beam induced deposition and autocatalytic growth processes

We employ Electron beam induced deposition (EBID) in combination with autocatalytic growth (AG) processes to fabricate magnetic nanostructures with controllable shapes and thicknesses. Following this route, different Fe deposits were prepared on silicon nitride membranes under ultra-high vacuum conditions and studied by scanning electron microscopy (SEM) and scanning transmission x-ray microspectroscopy (STXM). The originally deposited Fe nanostructures are composed of pure iron, especially when fabricated via autocatalytic growth processes. Quantitative near-edge x-ray absorption fine structure (NEXAFS) spectroscopy was employed to derive information on the thickness dependent composition. X-ray magnetic circular dichroism (XMCD) in STXM was used to derive the magnetic properties of the EBID prepared structures. STXM and XMCD analysis evinces the existence of a thin iron oxide layer at the deposit-vacuum interface, which is formed during exposure to ambient conditions. We were able to extract magnetic hysteresis loops for individual deposits from XMCD micrographs with varying external magnetic field. Within the investigated thickness range (2-16 nm), the magnetic coercivity, as evaluated from the width of the hysteresis loops, increases with deposit thickness and reaches a maximum value of ∼160 Oe at around 10 nm. In summary, we present a viable technique to fabricate ferromagnetic nanostructures in a controllable way and gain detailed insight into their chemical and magnetic properties.

Initial stages of oxide formation on the Zr surface at low oxygen pressure: An in situ FIM and XPS study

An improved methodology of the Zr specimen preparation was developed which allows fabrication of stable Zr nanotips suitable for FIM and AP applications. Initial oxidation of the Zr surface was studied on a Zr nanotip by FIM and on a polycrystalline Zr foil by XPS, both at low oxygen pressure (10(-8)-10(-7)mbar). The XPS data reveal that in a first, fast stage of oxidation, a Zr suboxide interlayer is formed which contains three suboxide components (Zr(+1), Zr(+2) and Zr(+3)) and is located between the Zr surface and a stoichiometric ZrO2 overlayer that grows in a second, slow oxidation stage. The sole suboxide layer has been observed for the first time at very early states of the oxidation (oxygen exposure ≤ 4L). The Ne(+) FIM observations are in accord with a two stage process of Zr oxide formation.

Nanoparticle conversion chemistry: Kirkendall effect, galvanic exchange, and anion exchange

Conversion chemistry is a rapidly maturing field, where chemical conversion of template nanoparticles (NPs) into new compositions is often accompanied by morphological changes, such as void formation. The principles and examples of three major classes of conversion chemical reactions are reviewed: the Kirkendall effect for metal NPs, galvanic exchange, and anion exchange, each of which can result in void formation in NPs. These reactions can be used to obtain complex structures that may not be attainable by other methods. During each kind of conversion chemical reaction, NPs undergo distinct chemical and morphological changes, and insights into the mechanisms of these reactions will allow for improved fine control and prediction of the structures of intermediates and products. Conversion of metal NPs into oxides, phosphides, sulphides, and selenides often occurs through the Kirkendall effect, where outward diffusion of metal atoms from the core is faster than inward diffusion of reactive species, resulting in void formation. In galvanic exchange reactions, metal NPs react with noble metal salts, where a redox reaction favours reduction and deposition of the noble metal (alloying) and oxidation and dissolution of the template metal (dealloying). In anion exchange reactions, addition of certain kinds of anions to solutions containing metal compound NPs drives anion exchange, which often results in significant morphological changes due to the large size of anions compared to cations. Conversion chemistry thus allows for the formation of NPs with complex compositions and structures, for which numerous applications are anticipated arising from their novel catalytic, electronic, optical, magnetic, and electrochemical properties.

Synthesis and exceptional thermal stability of Mg-based bimetallic nanoparticles during hydrogenation

Here we report the extraordinary thermal stability of Mg rich bimetallic nanoparticles (NPs), which is important for hydrogen storage technology. The enhanced NP stability is accomplished because of two critical improvements: (i) no void development within NPs (nanoscale Kirkendall effect) during their formation and (ii) suppressed Mg evaporation and NP hollowing during Mg hydrogenation at elevated temperature. The mechanism leading to the improved thermal stability of Mg-based bimetallic NPs is shown to be due to MgH2 hydride formation before evaporation can take place. These findings were tested for various compositions of Mg with Ni, Cu, and Ti, which are interesting combinations of materials for hydrogen storage systems. To achieve this we first demonstrate the synthesis mechanism of Mg-Ni and Mg-Cu NPs, which is well controlled at the single particle level, in order to accomplish multi-shell, alloy and intermetallic structures of interest for hydrogen storage tests. Aberration corrected transmission electron microscopy was carried out to unravel the detailed atomic structure and composition of the bimetallic NPs after production, processing, and hydrogenation. Finally, a simple and effective methodology is proposed for tuning the composition of the Mg-based bimetallic NPs based on the temperature-dependent nucleation behavior of NPs in the gas-phase.

Tuning the limiting thickness of a thin oxide layer on Al(111) with oxygen gas pressure

We report an x-ray photoelectron spectroscopy study of the oxidation of Al(111) surfaces at room temperature, which reveals that the limiting thickness of an aluminum oxide film can be tuned by using oxygen pressure. This behavior is attributed to a strong dependence of the kinetic potential on the oxygen gas pressure. The coverage of oxygen anions on the surface of the oxide film depends on the gas pressure leading to a pressure dependence of the kinetic potential. Our results indicate that a significantly large oxygen pressure (>1  Torr) is required to develop the saturated surface coverage of oxygen ions, which results in the maximum kinetic potential and therefore the saturated limiting thickness of the oxide film.

Adsorption of HCN onto Copper@Copper-Oxide Core–Shell Nanoparticle Systems

Copper compounds are widely used as impregnants that enhance the removal of HCN by carbon-based filter media. The reaction mechanism involved is poorly understood. In this study, we have followed the reaction of HCN with pristine copper, copper oxide (CuO and Cu2O) and copper@copperoxide (Cu@Cu2O) core–shell nanoparticles of well-defined size and composition. We have established a cooperative reaction mechanism where both the copper oxide shell and copper core are required for the chemisorption of HCN onto copper nanoparticle impregnants. The suitability of copper@copperoxide nanoparticles as impregnants for the removal of HCN in respirator canisters is discussed.

How metallic Fe controls the composition of its native oxide

We have studied in situ the oxidation of ultrathin iron layers and monitored the chemical changes induced by subsequent deposition of Fe metal using hard x-ray absorption spectroscopy. The site sensitivity of the technique allows us to quantify the composition of the layer throughout the oxidation or deposition process. It is found that the thin native oxide incorporates a significant fraction of Fe atoms remaining in a metallic configuration even in the saturated state. Subsequent deposition of Fe leads to a complete reduction of the oxide that adopts an FeO-like structure containing Fe2+ sites only.