Charge redistribution and electronic behavior in a series of Au-Cu alloys

New Insights into the ORR Catalysis on Pt Alloy Nanoparticles from an Element Specific d-Band Analysis

Bolstered by their unique atomic structures and tailored compositions, nanoalloys exhibit extraordinary properties making them ideal materials to solve challenges in energy storage and conversion catalysis. However, a quantitative description of the structure-property relationships using an accurate descriptor-based model for nanoalloys, ranging from bimetallic to multimetallic compositions, is needed to drive efficient material design toward high-performance catalysis. In this work, we highlight the electronic property and catalytic activity relationship from an element specific d-band analysis of Pt-based alloy catalysts using X-ray absorption near-edge spectroscopy (XANES). Using a series of L10-MPt/Pt (M = Fe, Co, Ni) core/shell alloy catalysts with well-defined atomic structures, we quantified subtle differences in the Pt d-electron states and correlated the Pt d-band structure to their superior catalytic activity toward the oxygen reduction reaction (ORR). Our analysis used the upper d-band edge position as a predictive descriptor for the mass activity toward the ORR instead of the commonly used d-band center position. Together with density functional theory calculations and Nørskov d-band theory, the upper d-band edge position for the Pt states, derived from experimental measurements, elucidates new physical insights into the ORR performance of the L10-MPt/Pt core/shell catalysts. An element specific Pt d-band analysis using XANES overcomes challenges in traditional X-ray photoelectron spectroscopy-based valence d-band analysis, which cannot distinguish signals from independent elements in nanoalloys. Thus, the insights from the element specific d-band analysis presented in this work are a promising approach to determine structure-property relationships in a variety of transition metal nanoalloys and will be useful in the design of future high-performance catalysts.

Highly efficient semi-hydrogenation in strained ultrathin PdCu shell and the atomic deciphering for the unlocking of activity-selectivity

Excellent ethylene selectivity in acetylene semi-hydrogenation is often obtained at the expense of activity. To break the activity-selectivity trade-off, precise control and in-depth understanding of the three-dimensional atomic structure of surfacial active sites are crucial. Here, we designed a novel Au@PdCu core-shell nanocatalyst featuring diluted and stretched Pd sites on the ultrathin shell (1.6 nm), which showed excellent reactivity and selectivity, with 100% acetylene conversion and 92.4% ethylene selectivity at 122 °C, and the corresponding activity was 3.3 times higher than that of the PdCu alloy. The atomic three-dimensional decoding for the activity-selectivity balance was revealed by combining pair distribution function (PDF) and reverse Monte Carlo simulation (RMC). The results demonstrate that a large number of active sites with a low coordination number of Pd-Pd pairs and an average 3.25% tensile strain are distributed on the surface of the nanocatalyst, which perform a pivotal function in the simultaneous improvement of hydrogenation activity and ethylene selectivity. Our work not only develops a novel strategy for unlocking the linear scaling relation in heterogeneous catalysis but also provides a paradigm for atomic 3D understanding of lattice strain in core-shell nanocatalysts.

Facet-Defined Dilute Metal Alloy Nanorods for Efficient Electroreduction of CO2 to n-Propanol

Electroreduction of CO2 into liquid fuels is a compelling strategy for storing intermittent renewable energy. Here, we introduce a family of facet-defined dilute copper alloy nanocrystals as catalysts to improve the electrosynthesis of n-propanol from CO2 and H2O. We show that substituting a dilute amount of weak-CO-binding metals into the Cu(100) surface improves CO2-to-n-propanol activity and selectivity by modifying the electronic structure of catalysts to facilitate C1-C2 coupling while preserving the (100)-like 4-fold Cu ensembles which favor C1-C1 coupling. With the Au0.02Cu0.98 champion catalyst, we achieve an n-propanol Faradaic efficiency of 18.2 ± 0.3% at a low potential of -0.41 V versus the reversible hydrogen electrode and a peak production rate of 16.6 mA·cm-2. This study demonstrates that shape-controlled dilute-metal-alloy nanocrystals represent a new frontier in electrocatalyst design, and precise control of the host and minority metal distributions is crucial for elucidating structure-composition-property relationships and attaining superior catalytic performance.

Operando insights into correlating CO coverage and Cu-Au alloying with the selectivity of Au NP-decorated Cu2O nanocubes during the electrocatalytic CO2 reduction

Electrochemical reduction of CO2 (CO2RR) is an attractive technology to reintegrate the anthropogenic CO2 back into the carbon cycle driven by a suitable catalyst. This study employs highly efficient multi-carbon (C2+) producing Cu2O nanocubes (NCs) decorated with CO-selective Au nanoparticles (NPs) to investigate the correlation between a high CO surface concentration microenvironment and the catalytic performance. Structure, morphology and near-surface composition are studied via operando X-ray absorption spectroscopy and surface-enhanced Raman spectroscopy, operando high-energy X-ray diffraction as well as quasi in situ X-ray photoelectron spectroscopy. These operando studies show the continuous evolution of the local structure and chemical environment of our catalysts during reaction conditions. Along with its alloy formation, a CO-rich microenvironment as well as weakened average CO binding on the catalyst surface during CO2RR is detected. Linking these findings to the catalytic function, a complex compositional interplay between Au and Cu is revealed in which higher Au loadings primarily facilitate CO formation. Nonetheless, the strongest improvement in C2+ formation appears for the lowest Au loadings, suggesting a beneficial role of the Au-Cu atomic interaction for the catalytic function in CO2RR. This study highlights the importance of site engineering and operando investigations to unveil the electrocatalyst's adaptations to the reaction conditions, which is a prerequisite to understand its catalytic behavior.

Amyloid-like nanofibrous network confined and aligned ultrafine bimetallic nanozymes for smart antibacterial therapy

Nanozyme-based antibacterial therapy (NABT) has emerged as a promising strategy to combat bacterial antimicrobial resistance. Engineering the noble metal nanozymes with strong bacterial capture and high catalytic activity for enhanced NABT is highly anticipated but still challenged. Herein, we developed hybrid nanozymes by engineering ultrafine bimetallic Au/Cu nanoparticles confined on the lysozyme amyloid-like nanofibrous networks (LNF). The introduction of copper in the nanozymes facilitates the H2O2 adsorption and reduces the energy barrier for activating the H2O2 decomposition to form •OH, meanwhile displaying the significantly enhanced POD-like activity under NIR irradiation. Taking advantage of the inherent supramolecular networks inspired from human defensin 6-trapping bacteria mechanism, the hybrid nanozymes effectively capture the bacteria and allow the catalytic attack around the bacterial surfaces to improve the antibacterial efficiency. Finally, the as-prepared nanozymes exhibit the preeminent bactericidal efficacy against bacteria, especially for drug-resistant bacteria both in vitro and in vivo, and the effect on wound healing.

Alloying as a Strategy to Boost the Stability of Copper Nanocatalysts during the Electrochemical CO2 Reduction Reaction

Copper nanocatalysts are among the most promising candidates to drive the electrochemical CO₂ reduction reaction (CO₂RR). However, the stability of such catalysts during operation is sub-optimal, and improving this aspect of catalyst behavior remains a challenge. Here, we synthesize well-defined and tunable CuGa nanoparticles (NPs) and demonstrate that alloying Cu with Ga considerably improves the stability of the nanocatalysts. In particular, we discover that CuGa NPs containing 17 at. % Ga preserve most of their CO₂RR activity for at least 20 h while Cu NPs of the same size reconstruct and lose their CO₂RR activity within 2 h. Various characterization techniques, including X-ray photoelectron spectroscopy and operando X-ray absorption spectroscopy, suggest that the addition of Ga suppresses Cu oxidation at open-circuit potential (ocp) and induces significant electronic interactions between Ga and Cu. Thus, we explain the observed stabilization of the Cu by Ga as a result of the higher oxophilicity and lower electronegativity of Ga, which reduce the propensity of Cu to oxidize at ocp and enhance the bond strength in the alloyed nanocatalysts. In addition to addressing one of the major challenges in CO₂RR, this study proposes a strategy to generate NPs that are stable under a reducing reaction environment.

Emerging Applications of Synchrotron Radiation X-Ray Techniques in Single Atomic Catalysts

Single atom catalysts (SACs) can achieve a maximum atom utilization efficiency of 100%, which provides significantly increased active sites compared with traditional catalysts during catalytic reactions. Synchrotron radiation technology is an important characterization method for identifying single-atom catalysts. Several types of internal information, such as the coordination number, bond length and electronic structure of metals, can all be analyzed. This review will focus on the introduction of synchrotron radiation techniques and their applications in SACs. First, the fundamentals of synchrotron radiation and the corresponding techniques applied in characterization of SACs will be briefly introduced, such as X-ray absorption near edge spectroscopy and extended X-ray absorption fine structure spectroscopy and in situ techniques. The detailed information obtained from synchrotron radiation X-ray characterization is described through four routes: 1) the local environment of a specific atom; 2) the oxidation state of SACs; 3) electronic structures at different orbitals; and 4) the in situ structure modification during catalytic reaction. In addition, a systematic summary of synchrotron radiation X-ray characterization on different types of SACs (noble metals and transition metals) will be discussed.

Laser Ablation Nanoarchitectonics of Au-Cu Alloys Deposited on TiO2 Photocatalyst Films for Switchable Hydrogen Evolution from Formic Acid Dehydrogenation

The regulation of H₂ evolution from formic acid dehydrogenation using recyclable photocatalyst films is an essential approach for on-demand H₂ production. We have successfully generated Au-Cu nanoalloys using a laser ablation method and deposited them on TiO₂ photocatalyst films (Au _x Cu_100-x /TiO₂). The Au-Cu/TiO₂ films were employed as photocatalysts for H₂ production from formic acid dehydrogenation under light-emitting diode (LED) irradiation (365 nm). The highest H₂ evolution rate for Au₂₀Cu₈₀/TiO₂ is archived to 62,500 μmol h^-1 g^-1 per photocatalyst weight. The remarkable performance of Au₂₀Cu₈₀/TiO₂ may account for the formation of Au-rich surfaces and the effect of Au alloying that enables Cu to sustain the metallic form on its surface. The metallic Au-Cu surface on TiO₂ is vital to supply the photoexcited electrons of TiO₂ to its surface for H₂ evolution. The rate-determining step (RDS) is identified as the reaction of a surface-active species with protons. The results establish a practical preparation of metal alloy deposited on photocatalyst films using laser ablation to develop efficient photocatalysts.

In Situ/Operando Electrocatalyst Characterization by X-ray Absorption Spectroscopy

During the last decades, X-ray absorption spectroscopy (XAS) has become an indispensable method for probing the structure and composition of heterogeneous catalysts, revealing the nature of the active sites and establishing links between structural motifs in a catalyst, local electronic structure, and catalytic properties. Here we discuss the fundamental principles of the XAS method and describe the progress in the instrumentation and data analysis approaches undertaken for deciphering X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) spectra. Recent usages of XAS in the field of heterogeneous catalysis, with emphasis on examples concerning electrocatalysis, will be presented. The latter is a rapidly developing field with immense industrial applications but also unique challenges in terms of the experimental characterization restrictions and advanced modeling approaches required. This review will highlight the new insight that can be gained with XAS on complex real-world electrocatalysts including their working mechanisms and the dynamic processes taking place in the course of a chemical reaction. More specifically, we will discuss applications of in situ and operando XAS to probe the catalyst's interactions with the environment (support, electrolyte, ligands, adsorbates, reaction products, and intermediates) and its structural, chemical, and electronic transformations as it adapts to the reaction conditions.

Tuning the surface composition of Cu3Au binary alloy

Using ambient-pressure X-ray photoelectron spectroscopy, here we report the real-time monitoring of dynamic surface composition evolution of Cu₃Au(100) in response to the imposed environmental stimuli. Segregation of Au to the pristine surface under ultrahigh vacuum annealing leads to the phase separation with pure Au at the surface and alloyed Au in the subsurface. Upon switching to an oxidizing atmosphere, oxygen adsorption drives the surface segregation of Cu along with inward migration of pure Au to the subsurface. Switching to a H₂ atmosphere results in oxygen loss from the oxygenated surface, thereby promoting Au surface segregation and reverting the surface to the pristine state with the Au termination. These measurements demonstrated the tunability of the surface composition of the binary alloy by utilizing the interplay between the tendency of segregating a more noble constituent to the surface and the tendency to segregate the more reactive one with the chemical stimuli.

Self-Supported Nanoporous Au3 Cu Electrode with Enriched Gold on Surface for Efficient Electrochemical Reduction of CO2

The key to the electrochemical conversion of CO₂ lies in the development of efficient electrocatalysts with ease of operation, good conductivity, and rich active sites that fulfil the desired reaction direction and selectivity. Herein, an oxidative etching of Au₂₀ Cu₈₀ alloy is used for the synthesis of a nanoporous Au₃ Cu alloy, representing a facile strategy for tuning the surface electronic properties and altering the adsorption behavior of the intermediates. HRTEM, XPS, and EXAFS results reveal that the curved surface of the synthesized nanoporous Au₃ Cu is rich in gold with unsaturated coordination conditions. It can be used directly as a self-supported electrode for CO₂ reduction, and exhibits high Faradaic efficiency (FE) of 98.12 % toward CO at a potential of -0.7 V versus the reversible hydrogen electrode (RHE). The FE is 1.47 times that over the as-made single nanoporous Au. Density functional theory reveals that *CO has a relatively long distance on the surface of nanoporous Au₃ Cu, making desorption of CO easier and avoiding CO poisoning. The Hirshfeld charge distribution shows that the Au atoms have a negative charge and the Cu atoms exhibit a positive charge, which separately bond to the C atom and O atom in the *COOH intermediate through a bidentate mode. This affords the lowest *COOH adsorption free energy and low desorption energy for CO molecules.

Impact of Nonideal Nanoparticles on X-ray Photoelectron Spectroscopic Quantitation: An Investigation Using Simulation and Modeling of Gold Nanoparticles

Quantitative X-ray photoelectron spectroscopic (XPS) analysis combined with spectral modeling of photoelectrons can be valuable while investigating the surface chemistry of nanoparticles (NPs) with different morphologies. Herein, with the use of NIST Simulation of Electron Spectra for Surface Analysis (SESSA), a comparative analysis of experimental and simulated photoelectron peak intensities in gold nanoparticles (AuNPs) of different morphologies is presented. Three sets of supported AuNPs with different morphologies were selected from a series of as synthesized Au-TiO₂ catalyst samples. Using transmission electron microscopy (TEM) analyzed morphological information on the AuNPs as input model parameters in SESSA, XPS spectra were generated from the respective input NP morphologies. A degree of greater mismatch between SESSA simulated and experimental XPS spectra was observed while using the TEM obtained average diameter of the nanoparticles. The degree of mismatch lowered when the true nonspherical shape of the nanoparticles as obtained from TEM images was taken into account for the simulation. This demonstrates the impact of surface morphology on the XPS peak intensities which needs to be incorporated to obtain precise quantified information from the supported nanoparticles. This work demonstrates the applicability of SESSA in combination with experimental XPS and TEM measurements for precise quantification of XPS spectra from complex, nonideal shaped nanoparticles. This study can be extended to include a broad range of nanoparticles with ideal or nonideal geometries, thus providing a simple method to utilize quantitative XPS analysis to a wide range of nanomaterials.

Hydrogen-Mediated Electron Doping of Gold Clusters As Revealed by In Situ X-ray and UV-vis Absorption Spectroscopy

We previously reported that small (∼1.2 nm) gold clusters stabilized by poly(N-vinyl-2-pyrrolidone) (Au:PVP) exhibited a localized surface plasmon resonance (LSPR) band at ∼520 nm in the presence of NaBH₄. To reveal the mechanism of this phenomenon, the electronic structure of Au:PVP during the reaction with NaBH₄ in air was examined by means of in situ X-ray absorption spectroscopy at Au L₃-edge and UV-vis spectroscopy. These measurements indicated that the appearance of the LSPR band is not associated with the growth in size but is ascribed to electron doping to the Au sp band by the adsorbed H atoms.

Dumbbell-like Au0.5Cu0.5@Fe3O4 Nanocrystals: Synthesis, Characterization, and Catalytic Activity in CO Oxidation

We report the colloidal synthesis of dumbbell-like Au_0.5Cu_0.5@Fe₃O₄ nanocrystals (AuCu@FeOx NCs) and the study of their properties in the CO oxidation reaction. To this aim, the as-prepared NCs were deposited on γ-alumina and pretreated in an oxidizing environment to remove the organic ligands. A comparison of these NCs with bulk Fe₃O₄-supported AuCu NCs showed that the nanosized support was far more effective in preventing the sintering of the metal domains, leading thus to a superior catalytic activity. Nanosizing of the support could be thus an effective, general strategy to improve the thermal stability of metallic NCs. On the other hand, the support size did not affect the chemical transformations experienced by the AuCu NCs during the activation step. Independently from the support size, we observed indeed the segregation of Cu from the alloy phase under oxidative conditions as well as the possible incorporation of the Cu atoms in the iron oxide domain.

Spontaneous incorporation of gold in palladium-based ternary nanoparticles makes durable electrocatalysts for oxygen reduction reaction

Replacing platinum by a less precious metal such as palladium, is highly desirable for lowering the cost of fuel-cell electrocatalysts. However, the instability of palladium in the harsh environment of fuel-cell cathodes renders its commercial future bleak. Here we show that by incorporating trace amounts of gold in palladium-based ternary (Pd₆CoCu) nanocatalysts, the durability of the catalysts improves markedly. Using aberration-corrected analytical transmission electron microscopy in conjunction with synchrotron X-ray absorption spectroscopy, we show that gold not only galvanically replaces cobalt and copper on the surface, but also penetrates through the Pd–Co–Cu lattice and distributes uniformly within the particles. The uniform incorporation of Au provides a stability boost to the entire host particle, from the surface to the interior. The spontaneous replacement method we have developed is scalable and commercially viable. This work may provide new insight for the large-scale production of non-platinum electrocatalysts for fuel-cell applications.

Replacement of platinum is important for lowering the cost of fuel-cell electrocatalysts, but less precious alternatives such as palladium are hindered by lower durability. Here, the authors show that incorporation of trace amounts of gold improves the durability of palladium based oxygen reduction catalysts.

Au 4f spin–orbit coupling effects in supported gold nanoparticles

We reveal that the ratio of spin–orbit components in X-ray photoelectron Au 4f spectra of titania-supported gold nanoparticles deviates from the statistical ratio 4 : 3 and demonstrates an appreciable dependence on the concentration of Au atoms on the surface of TiO₂ support and size of Au nanoparticles.

A highly efficient potassium-treated Au–Cu/Al2O3 catalyst for the preferential oxidation of carbon monoxide

A novel potassium-treated Au–Cu bimetallic nanoparticles as a highly active and selective catalyst for CO-PROX.

Nano-intermetallic AuCu₃ catalyst for oxygen reduction reaction: performance and mechanism

This paper introduces a new approach for catalyst design using the non-precious metal Cu as one of the catalytic active centers. This differs from previous studies that considered precious metals to be responsible for the catalytic reaction in precious alloys. Intermetallic AuCu3/C nanoparticles with a diameter of 3 nm were developed for the first time, with uniform dispersion and a narrow size distribution. The ca. 3 nm as-synthesised AuCu3/C showed superior catalytic performance for oxygen reduction reactions (ORR) in alkaline solutions, with comparable half-wave potential and 1.5 times mass current density of commercial Pt/C at 0.80 V (vs. reversible hydrogen electrode (RHE)). The advanced catalytic activities are mainly attributed to the synergetic effects of electro-active atomic Au and Cu on the particle surface, in which Cu helps to activate the O2 molecule and Au benefits OH(-) desorption. The excellent durability and methanol tolerance exhibited in alkaline solutions provide another advantage for AuCu3/C to be considered as a potential alternative cathode catalyst in alkaline fuel cells.

Hydrogen-induced structural transformation of AuCu nanoalloys probed by synchrotron X-ray diffraction techniques

In situ X-ray diffraction measurements reveal that the transformation of a AuCu nanoalloy from a face-centered-cubic to an L10 structure is accelerated under a hydrogen atmosphere. The structural transformation rate for the AuCu nanoalloy under hydrogen above 433 K was found to be 100 times faster than that in a vacuum, which is the first quantitative observation of hydrogen-induced ordering of nanoalloys.

Single-atom Catalysis Using Pt/Graphene Achieved through Atomic Layer Deposition

Platinum-nanoparticle-based catalysts are widely used in many important chemical processes and automobile industries. Downsizing catalyst nanoparticles to single atoms is highly desirable to maximize their use efficiency, however, very challenging. Here we report a practical synthesis for isolated single Pt atoms anchored to graphene nanosheet using the atomic layer deposition (ALD) technique. ALD offers the capability of precise control of catalyst size span from single atom, subnanometer cluster to nanoparticle. The single-atom catalysts exhibit significantly improved catalytic activity (up to 10 times) over that of the state-of-the-art commercial Pt/C catalyst. X-ray absorption fine structure (XAFS) analyses reveal that the low-coordination and partially unoccupied densities of states of 5d orbital of Pt atoms are responsible for the excellent performance. This work is anticipated to form the basis for the exploration of a next generation of highly efficient single-atom catalysts for various applications.

The effect of long-range order on the elastic properties of Cu3Au

Ab initio calculations, based on the exact muffin-tin orbitals method are used to determine the elastic properties of Cu-Au alloys with Au/Cu ratio 1/3. The compositional disorder is treated within the coherent potential approximation. The lattice parameters and single-crystal elastic constants are calculated for different partially ordered structures ranging from the fully ordered L1(2) to the random face centered cubic lattice. It is shown that the theoretical elastic constants follow a clear trend with the degree of chemical order: namely, C(11) and C(12) decrease, whereas C(44) remains nearly constant with increasing disorder. The present results are in line with the experimental findings that the impact of the chemical ordering on the fundamental elastic parameters is close to the resolution of the available experimental and theoretical tools.

Measurement of a pauli and orbital paramagnetic state in bulk gold using x-ray magnetic circular dichroism spectroscopy

We show that bulk gold (Au) exhibits temperature-independent paramagnetism in an external magnetic field by x-ray magnetic circular dichroism spectroscopy at the Au L(2) and L(3) edges. Using the sum-rule analysis, we obtained a magnetic moment of 1.3 × 10(-4) μB/atom in an external magnetic field of 10 T and a paramagnetic susceptibility of 8.9 × 10(-6) for the 5d orbit. The induced paramagnetism in bulk Au is characterized by a large (≈ 30%) orbital contribution. This orbital component was retained even when Au atoms formed nanoparticles, playing an important role in stabilizing the spontaneous spin polarization in the Au nanoparticles.