Absorption of Li on the Si(100)2 x 1 surface studied with high-resolution core-level spectroscopy

Effect of Bias Potential on the Interface of a Solid Electrolyte and Electrode during XPS Depth Profiling Analysis

Depth profiling is an essential method to investigate the physical and chemical properties of a solid electrolyte and electrolyte/electrode interface. In conventional depth profiling, various spectroscopic tools such as X-ray photoelectron spectroscopy (XPS) and secondary ion mass spectroscopy (SIMS) are utilized to monitor the chemical states along with ion bombardment to etch a sample. Nevertheless, the ion bombardment during depth profiling results in an inevitable systematic error, i.e., the accumulation of mobile ions at the electrolyte/electrode interface, known as the ion pile-up phenomenon. Here, we propose a novel method using bias potential, the substrate-bias method, to prevent the ion pile-up phenomena during depth profiling of a solid electrolyte. When the positive bias potential is applied on the substrate (electrode), the number of accumulating ions at the electrolyte/electrode interface is significantly reduced. The in-depth XPS analysis with the biased electrode reveals not only the suppression of the ion pile-up phenomena but also the altered chemical states at the interfacial region between the electrolyte and electrode depending on the bias. The proposed substrate-bias method can be a good alternative scheme for an efficient yet precise depth profiling technique for a solid electrolyte.

Toward Ultrastable Metal Anode/Li6PS5Cl Interface via an Interlayer as Li Reservoir

All-solid-state sulfide-based Li metal batteries are promising candidates for energy storage systems. However, thorny issues associated with undesired reactions and contact failure at the anode interface hinder their commercialization. Herein, an indium foil was endowed with a formed interlayer whose surface film is enriched with LiF and LiIn phases via a feasible prelithiation route. The lithiated alloy of the interlayer can regulate Li+ flux and charge distribution as a Li reservoir, benefiting uniform Li deposition. Meanwhile, it can suppress the reductive decomposition of the Li6PS5Cl electrolyte and maintain sufficient solid-solid contact. In situ impedance spectra reveal that constant interface impedance and fast charge transfer are realized by the interlayer. Further, long-term Li stripping/plating over 2000 h at 2.55 mA cm-2 is demonstrated by this anode. All-solid-state cells employing a LiCoO2 cathode and the Pre In anode can work for over 700 cycles with a capacity retention of 96.15% at 0.5 C.

Facile synthesis of highly luminescent lithium silicate nanocrystals with varying crystal structures and morphology

The colloidal synthesis of lithium silicate nanocrystals with varying morphology, composition, crystal structures, and high intensity visible luminescence is reported.

Anomalous Li Storage Capability in Atomically Thin Two-Dimensional Sheets of Nonlayered MoO2

Since the first exfoliation and identification of graphene in 2004, research on layered ultrathin two-dimensional (2D) nanomaterials has achieved remarkable progress. Realizing the special importance of 2D geometry, we demonstrate that the controlled synthesis of nonlayered nanomaterials in 2D geometry can yield some unique properties that otherwise cannot be achieved in these nonlayered systems. Herein, we report a systematic study involving theoretical and experimental approaches to evaluate the Li-ion storage capability in 2D atomic sheets of nonlayered molybdenum dioxide (MoO₂). We develop a novel monomer-assisted reduction process to produce high quality 2D sheets of nonlayered MoO₂. When used as lithium-ion battery (LIB) anodes, these ultrathin 2D-MoO₂ electrodes demonstrate extraordinary reversible capacity, as high as 1516 mAh g^-1 after 100 cycles at the current rate of 100 mA g^-1 and 489 mAh g^-1 after 1050 cycles at 1000 mA g^-1. It is evident that these ultrathin 2D sheets did not follow the normal intercalation-cum-conversion mechanism when used as LIB anodes, which was observed for their bulk analogue. Our ex situ XPS and XRD studies reveal a Li-storage mechanism in these 2D-MoO₂ sheets consisting of an intercalation reaction and the formation of metallic Li phase. In addition, the 2D-MoO₂ based microsupercapacitors exhibit high areal capacitance (63.1 mF cm^-2 at 0.1 mA cm^-2), good rate performance (81% retention from 0.1 to 2 mA cm^-2), and superior cycle stability (86% retention after 10,000 cycles). We believe that our work identifies a new pathway to make 2D nanostructures from nonlayered compounds, which results in an extremely enhanced energy storage capability.

Single-step plasma synthesis of carbon-coated silicon nanoparticles

We have developed a novel single-step technique based on nonthermal, radio frequency (rf) plasmas to synthesize sub-10 nm, core-shell, carbon-coated crystalline Si (c-Si) nanoparticles (NPs) for potential application in Li(+) batteries and as fluorescent markers. Hydrogen-terminated c-Si NPs nucleate and grow in a SiH4-containing, low-temperature plasma in the upstream section of a tubular quartz reactor. The c-Si NPs are then transported downstream by gas flow, and are coated with amorphous carbon (a-C) in a second C2H2-containing plasma. X-ray diffraction (XRD), X-ray photoelectron spectroscopy, and in situ attenuated total reflection Fourier transform infrared spectroscopy show that a thin, < 1 nm, 3C-SiC layer forms at the c-Si/a-C interface. By varying the downstream C2H2 plasma rf power, we can alter the nature of the a-C coating as well as the thickness of the interfacial 3C-SiC layer. The transmission electron microscopy (TEM) analysis is in agreement with the Si NP core size determined by Raman spectroscopy, photoluminescence spectroscopy, and XRD analysis. The size of the c-Si NP core, and the corresponding light emission from these NPs, was directly controlled by varying the thickness of the interfacial 3C-SiC layer. This size tunable emission thus also demonstrates the versatility of this technique for synthesizing c-Si NPs for potential applications in light emitting diodes, biological markers, and nanocrystal inks.

Theoretical Study of Mixed Silicon−Lithium Clusters SinLip(+) (n = 1−6, p = 1−2)

Theoretical study on the structures of neutral and singly charged Si(n)Li(p)((+)) (n=1-6, p=1-2) clusters have been carried out in the framework of the density functional theory (DFT) with the B3LYP functional. The structures of the neutral Si(n)Li(p) and cationic Si(n)Li(p)(+) clusters are found to keep the frame of the corresponding Si(n), Li species being adsorbed at the surface. The localization of the lithium cation is not the same one as that of the neutral atom. The Li(+) ion is preferentially located on a Si atom, while the Li atom is preferentially attached at a bridge site. A clear parallelism between the structures of Si(n)Na(p) and those of Si(n)Li(p) appears. The population analysis show that the electronic structure of Si(n)Li(p) can be described as Si(n)(p)(-)+pLi(+) for the small sizes considered. Vertical and adiabatic ionization potentials, adsorption energies, as well as electric dipole moments and static dipolar polarizabilities, are calculated for each considered isomer of neutral species.