Theoretical study of O adlayers on Ru(0001)

Elucidating the Role of Reduction Kinetics in the Phase-Controlled Growth on Preformed Nanocrystal Seeds: A Case Study of Ru

This study demonstrates the crucial role of reduction kinetics in phase-controlled synthesis of noble-metal nanocrystals using Ru nanocrystals as a case study. We found that the reduction kinetics played a more important role than the templating effect from the preformed seed in dictating the crystal structure of the deposited overlayers despite their intertwined effects on successful epitaxial growth. By employing two different polyols, a series of Ru nanocrystals with tunable sizes of 3-7 nm and distinct patterns of crystal phase were synthesized by incorporating different types of Ru seeds. Notably, the use of ethylene glycol and triethylene glycol consistently resulted in the formation of Ru shell in natural hexagonal close-packed (hcp) and metastable face-centered cubic (fcc) phases, respectively, regardless of the size and phase of the seed. Quantitative measurements and theoretical calculations suggested that this trend was a manifestation of the different reduction kinetics associated with the precursor and the chosen polyol, which, in turn, affected the reduction pathway (solution versus surface) and packing sequence of the deposited Ru atoms. This work not only underscores the essential role of reduction kinetics in controlling the packing of atoms and thus the phase taken by Ru nanocrystals but also suggests a potential extension to other noble-metal systems.

Screening strain sensitive transition metals using oxygen adsorption

Strain can be a useful handle to alter the catalytic properties of strain-sensitive metals (orange).

Ultrafast Diffusion at the Onset of Growth: O/Ru(0001)

Nanoscopic clustering in a 2D disordered phase is observed for oxygen on Ru(0001) at low coverages and high temperatures. We study the coexistence of quasistatic clusters (with a characteristic length of ∼9  Å) and highly mobile atomic oxygen which diffuses between the energy-inequivalent, threefold hollow sites of the substrate. We determine a surprisingly low activation energy for diffusion of 385±20  meV. The minimum of the O-O interadsorbate potential appears to be at lower separations than previously reported.

Kinetic and mechanistic analysis of NH3 decomposition on Ru(0001), Ru(111) and Ir(111) surfaces

We investigated the catalytic NH3 decomposition on Ru and Ir metal surfaces using density functional theory. The reaction mechanisms were unraveled on both metals, considering that, on the nano-scale, Ru particles may also present an fcc structure, hence, leading to three energy profiles. We implemented thermodynamic and kinetic parameters obtained from DFT into microkinetic simulations. Batch reactor simulations suggest that hydrogen generation starts at 400 K, 425 K and 600 K on Ru(111), Ru(0001) and Ir(111) surfaces, respectively, in excellent agreement with experiments. During the reaction, the main surface species on Ru are NH, N and H, whereas on Ir(111), it is mainly NH. The rate-determining step for all surfaces is the formation of molecular nitrogen. We also performed temperature-programmed reaction simulations and inspected the desorption spectra of N2 and H2 as a function of temperature, which highlighted the importance of N coverage on the desorption rate.

Biomass hydrodeoxygenation catalysts innovation from atomistic activity predictors

Circular economy emphasizes the idea of transforming products involving economic growth and improving the ecological system to reduce the negative consequences caused by the excessive use of raw materials. This can be achieved with the use of second-generation biomass that converts industrial and agricultural wastes into bulk chemicals. The use of catalytic processes is essential to achieve a viable upgrade of biofuels from the lignocellulosic biomass. We carried out density functional theory calculations to explore the relationship between 13 transition metals (TMs) properties, as catalysts, and their affinity for hydrogen and oxygen, as key species in the valourization of biomass. The relation of these parameters will define the trends of the hydrodeoxygenation (HDO) process on biomass-derived compounds. We found the hydrogen and oxygen adsorption energies in the most stable site have a linear relation with electronic properties of these metals that will rationalize the surface's ability to bind the biomass-derived compounds and break the C-O bonds. This will accelerate the catalyst innovation for low temperature and efficient HDO processes on biomass derivates, e.g. guaiacol and anisole, among others. Among the monometallic catalysts explored, the scaling relationship pointed out that Ni has a promising balance between hydrogen and oxygen affinities according to the d-band centre and d-band width models. The comparison of the calculated descriptors to the adsorption strength of guaiacol on the investigated surfaces indicates that the d-band properties alone are not best suited to describe the trend. Instead, we found that a linear combination of work function and d-band properties gives significantly better correlation. This article is part of a discussion meeting issue 'Science to enable the circular economy'.

Density fluctuations as door-opener for diffusion on crowded surfaces

How particles can move on a catalyst surface that, under the conditions of an industrial process, is highly covered by adsorbates and where most adsorption sites are occupied has remained an open question. We have studied the diffusion of O atoms on a fully CO-covered Ru(0001) surface by means of high-speed/variable-temperature scanning tunneling microscopy combined with density functional theory calculations. Atomically resolved trajectories show a surprisingly fast diffusion of the O atoms, almost as fast as on the clean surface. This finding can be explained by a "door-opening" mechanism in which local density fluctuations in the CO layer intermittently create diffusion pathways on which the O atoms can move with low activation energy.

Oxygen orders differently under graphene: new superstructures on Ir(111)

Using scanning tunneling microscopy, the oxygen adsorbate superstructures on bare Ir(111) are identified and compared to the ones formed by intercalation in between graphene and the Ir(111) substrate. For bare Ir(111) we observe O-(2 × 2) and O-(2 × 1) structures, thereby clarifying a persistent uncertainty about the existence of these structures and the role of defects for their stability. For the case of graphene-covered Ir(111), oxygen intercalation superstructures can be imaged through the graphene monolayer by choosing proper tunneling conditions. Depending on the pressure, temperature and duration of O2 exposure as well as on the graphene morphology, O-(2 × 2), O-(√3×√3)-R30°, O-(2 × 1) and O-(2√3 × 2√3)-R30° superstructures with respect to Ir(111) are observed under the graphene cover. Two of these structures, the O-(√3 × √3)-R30° and the (2√3 × 2√3)-R30° structure are only observed when the graphene layer is on top. Phase coexistence and formation conditions of the intercalation structures between graphene and Ir(111) are analyzed. The experimental results are compared to density functional theory calculations including dispersive forces. The existence of these phases under graphene and their absence on bare Ir(111) are discussed in terms of possible changes in the adsorbate-substrate interaction due to the presence of the graphene cover.

Polarization-driven catalysis via ferroelectric oxide surfaces

Ferroelectric polarization can tune the surface chemistry: enhancing technologically important catalytic reactions such as NO_x direct decomposition and SO₂ oxidation.

Ab initio atomistic thermodynamics study on the oxidation mechanism of binary and ternary alloy surfaces

Utilizing a combination of ab initio density-functional theory and thermodynamics formalism, we have established the microscopic mechanisms for oxidation of the binary and ternary alloy surfaces and provided a clear explanation for the experimental results of the oxidation. We construct three-dimensional surface phase diagrams (SPDs) for oxygen adsorption on three different Nb-X(110) (X = Ti, Al or Si) binary alloy surfaces. On the basis of the obtained SPDs, we conclude a general microscopic mechanism for the thermodynamic oxidation, that is, under O-rich conditions, a uniform single-phase SPD (type I) and a nonuniform double-phase SPD (type II) correspond to the sustained complete selective oxidation and the non-sustained partial selective oxidation by adding the X element, respectively. Furthermore, by revealing the framework of thermodynamics for the oxidation mechanism of ternary alloys through the comparison of the surface energies of two separated binary alloys, we provide an understanding for the selective oxidation behavior of the Nb ternary alloy surfaces. Using these general microscopic mechanisms, one could predict the oxidation behavior of any binary and multi-component alloy surfaces based on thermodynamics considerations.

Bottom-up fabrication of graphene on Ru(0001) via molecular self-assembly

A bottom-up fabrication of graphene via molecular self-assembly of p-Terphenyl on Ru(0001) has been investigated by scanning tunneling microcopy and density functional theory. Upon annealing of the sample at 450 °C, the intermediate stage is observed, in which the adsorbed p-Terphenyl molecules and graphitized flakes converted from the molecules coexist, implying the onset of dehydrogenation of p-Terphenyl. At the annealing temperature of 480 °C, the graphitized flakes start to convert into graphene. An adsoption energy of 5.99 eV is calculated for an individual p-Terphenyl molecule on Ru(0001), denoting a strong interaction between the adsorbate and substrate. The intermolecular interaction brings an extra adsorption energy of 0.28 eV for each molecule in the di-molecule adsorption system. During the conversion process from adsorbed molecule into graphene, the intermolecular interaction leads to the increase of the dehydrogenation barrier from 1.52 to 1.64 eV.

Surface resonances in electron reflection from overlayers

Electron scattering by oxygen monolayers on the Ru(0 0 0 1) surface is studied both experimentally and theoretically. Sharp transmission resonances at low energies are revealed and established to originate from critical points of a special kind in the complex band structure of the substrate. Electron reflection from the clean and oxidized Ru(0 0 0 1) is measured for kinetic energies up to 40 eV at normal incidence for oxygen coverages of 1/4, 1/2, 3/4, and one monolayer. The reflection spectra R(E) are analyzed using a Bloch-waves based ab initio scattering theory. In addition to the substrate-induced resonances the reconstructed (2 × 1) and (2 × 2) surfaces show surface resonances due to pre-emergent secondary diffraction beams. The R(E) spectra are shown to give unambiguous evidence of the hcp stacking of the oxygen layer.

First-principles study of nitrogen adsorption and dissociation on α-uranium (001) surface

Nitrogen adsorption and dissociation on the α-uranium (001) surface.

STM, SECPM, AFM and Electrochemistry on Single Crystalline Surfaces

Scanning probe microscopy (SPM) techniques have had a great impact on research fields of surface science and nanotechnology during the last decades. They are used to investigate surfaces with scanning ranges between several 100 μm down to atomic resolution. Depending on experimental conditions, and the interaction forces between probe and sample, different SPM techniques allow mapping of different surface properties. In this work, scanning tunneling microscopy (STM) in air and under electrochemical conditions (EC-STM), atomic force microscopy (AFM) in air and scanning electrochemical potential microscopy (SECPM) under electrochemical conditions, were used to study different single crystalline surfaces in electrochemistry. Especially SECPM offers potentially new insights into the solid-liquid interface by providing the possibility to image the potential distribution of the surface, with a resolution that is comparable to STM. In electrocatalysis, nanostructured catalysts supported on different electrode materials often show behavior different from their bulk electrodes. This was experimentally and theoretically shown for several combinations and recently on Pt on Au(111) towards fuel cell relevant reactions. For these investigations single crystals often provide accurate and well defined reference and support systems. We will show heteroepitaxially grown Ru, Ir and Rh single crystalline surface films and bulk Au single crystals with different orientations under electrochemical conditions. Image studies from all three different SPM methods will be presented and compared to electrochemical data obtained by cyclic voltammetry in acidic media. The quality of the single crystalline supports will be verified by the SPM images and the cyclic voltammograms. Furthermore, an outlook will be presented on how such supports can be used in electrocatalytic studies.

Contrast reversal and shape changes of atomic adsorbates measured with scanning tunneling microscopy

Systematic, quantitative comparisons between scanning tunneling microscopy (STM) experiments and first principles simulations of O(2 x 2)/Ru(0001) have been performed. The shape of the atomic adsorbates in the images depends strongly on the tunneling resistance and changes reversibly from circular (high resistance) to triangular (low resistance). In addition, after adsorption of oxygen on the STM tip we observe a contrast reversal on the surface, confirmed by extensive numerical simulations.

Oxide-free oxygen incorporation into Ru(0001)

A smooth Ru(0001) surface prepared under ultra-high vacuum conditions has been loaded with oxygen under high-pressure (p approximately 1 bar) and low-temperature (T < 600 K) conditions. Oxygen phases created in this way have been investigated by means of thermal desorption spectroscopy, low-energy electron diffraction, and ultraviolet photoelectron spectroscopy. The exposure procedures applied lead to oxygen incorporation into the subsurface region without creation of RuO2 domains. For oxygen exposures ranging from 10(11) to 10(14) L oxygen contents up to about 4 monolayer equivalent could be achieved. The oxygen incorporation is thermally activated. The CO oxidation reaction conducted at mild temperatures (T < 500 K) at a sample loaded with subsurface oxygen reaches CO --> CO2 conversion probabilities of 10(-3).

Role of subsurface oxygen in oxide formation at transition metal surfaces

We present a density-functional theory trend study addressing the incorporation of oxygen into the basal plane of the late 4d transition metals (TMs) from Ru to Ag. Occupation of subsurface sites is always connected with a significant distortion of the host lattice, rendering it initially less favorable than on-surface chemisorption. Penetration starts only after a critical coverage theta(c), which is lower for the softer metals towards the right of the TM series. The computed theta(c) are found to be very similar to those above which the bulk oxide phase becomes thermodynamically more stable, thus suggesting that the initial incorporation of O actuates the formation of a surface oxide on TM surfaces.

Electronic structure and catalysis on metal surfaces

The powerful computational resources available to scientists today, together with recent improvements in electronic structure calculation algorithms, are providing important new tools for researchers in the fields of surface science and catalysis. In this review, we discuss first principles calculations that are now capable of providing qualitative and, in many cases, quantitative insights into surface chemistry. The calculations can aid in the establishment of chemisorption trends across the transition metals, in the characterization of reaction pathways on individual metals, and in the design of novel catalysts. First principles studies provide an excellent fundamental complement to experimental investigations of the above phenomena and can often allow the elucidation of important mechanistic details that would be difficult, if not impossible, to determine from experiments alone.