Experimental investigation of magnetic-field-induced aggregation kinetics in nonaqueous ferrofluids

Pair correlations of the easy magnetisation axes of superparamagnetic nanoparticles in a ferrofluid/ferrocomposite

The widespread use of magnetic nanoparticles in modern technologies and medical applications highlights the need for reliable theoretical models that can predict their physical properties. The pair correlation function of two randomly selected superparamagnetic nanoparticles in a ferrofluid/ferrocomposite is studied to depict the joint probability density of the easy magnetisation axes across the planes of parameters of major importance; these are the interaction of ferroparticles with an external magnetic field, the energy of magnetic anisotropy inside the superparamagnetic nanoparticle, and the interparticle magnetic dipole-dipole interaction. Assuming the rotational symmetry of the system, we come to the conclusion that the pair correlations of interest are dependent only on the polar angles, determining the inclinations of the ferroparticle easy axes from the direction of an external magnetic field. The dimer configuration, where two ferroparticles are in close contact along a magnetic field with their easy magnetisation axes aligned, is the most probable. This configuration becomes more pronounced with increasing anisotropy energy, dipolar coupling constant, and external magnetic field.

Correlating the Dipolar Interactions Induced Magneto-Viscoelasticity and Thermal Conductivity Enhancements in Nanomagnetic Fluids

The effective thermal management of electronic system holds the key to maximize their performance. The recent miniaturization trends require a cooling system with high heat flux capacity, localized cooling, and active control. Nanomagnetic fluids (NMFs) based cooling systems have the ability to meet the current demand of the cooling system for the miniaturized electronic system. However, the thermal characteristics of NMFs have a long way to go before the internal mechanisms are well understood. This review mainly focuses on the three aspects to establish a correlation between the thermal and rheological properties of the NMFs. First, the background, stability, and factors affecting the properties of the NMFs are discussed. Second, the ferrohydrodynamic equations are introduced for the NMFs to explain the rheological behavior and relaxation mechanism. Finally, different theoretical and experimental models are summarized that explain the thermal characteristics of the NMFs. Thermal characteristics of the NMFs are significantly affected by the morphology and composition of the magnetic nanoparticles (MNPs) in NMFs as well as the type of carrier liquids and surface functionalization that also influences the rheological properties. Thus, understanding the correlation between the thermal characteristics of the NMFs and rheological properties helps develop cooling systems with improved performance.

Magnetic nanofluids (Ferrofluids): Recent advances, applications, challenges, and future directions

Impelled by the need to find solutions to new challenges of modern technologies new materials with unique properties are being explored. Among various new materials that emerged over the decades, magnetic fluids exhibiting interesting physiochemical properties (optical, thermal, magnetic, rheological, apparent density, etc.) under a magnetic stimulus have been at the forefront of research. In the initial phase, there has been a fervent scientific curiosity to understand the field-induced intriguing properties of such fluids but later a plethora of technological applications emerged. Magnetic nanofluid, popularly known as ferrofluid, is a colloidal suspension of fine magnetic nanoparticles, has been at the forefront of research because of its magnetically tunable physicochemical properties and applications. Due to their stimuli-responsive behaviour, they have been finding more applications in biology and other engineering disciplines in recent years. Therefore, a critical review of this topic highlighting the necessary background, the potential of this material for emerging technologies, and the latest developments is warranted. This review also provides a summary of various applications, along with the key challenges and future research directions. The first part of the review addresses the different types of magnetic fluids, the genesis of magnetic fluids, their synthesis methodologies, properties, and stabilization techniques are discussed in detail. The second part of the review highlights the applications of magnetic nanofluids and nanoemulsions (as model systems) in probing order-disorder transitions, scattering, diffraction, magnetically reconfigurable internal structures, molecular interaction, and weak forces between colloidal particles, conformational changes of macromolecules at interfaces and polymer-surfactant complexation at the oil-water interface. The last part of the review summarizes the interesting applications of magnetic fluids such as heat transfer, sensors (temperature, pH, urea detection, cations, defect detection sensors), tunable optical filters, removal of dyes, dynamic seals, magnetic hyperthermia-based cancer therapy and other biomedical applications. The applications of magnetic nanofluids in diverse disciplines are growing day by day, yet there are challenges in their practical adaptation as field-worthy or packaged products. This review provides a pedagogical description of magnetic fluids, with the necessary background, key concepts, physics, experimental protocols, design of experiments, challenges and future directions.

Ferrofluids and bio-ferrofluids: looking back and stepping forward

Ferrofluids investigated along for about five decades are ultrastable colloidal suspensions of magnetic nanoparticles, which manifest simultaneously fluid and magnetic properties. Their magnetically controllable and tunable feature proved to be from the beginning an extremely fertile ground for a wide range of engineering applications. More recently, biocompatible ferrofluids attracted huge interest and produced a considerable increase of the applicative potential in nanomedicine, biotechnology and environmental protection. This paper offers a brief overview of the most relevant early results and a comprehensive description of recent achievements in ferrofluid synthesis, advanced characterization, as well as the governing equations of ferrohydrodynamics, the most important interfacial phenomena and the flow properties. Finally, it provides an overview of recent advances in tunable and adaptive multifunctional materials derived from ferrofluids and a detailed presentation of the recent progress of applications in the field of sensors and actuators, ferrofluid-driven assembly and manipulation, droplet technology, including droplet generation and control, mechanical actuation, liquid computing and robotics.

Magnetic properties of textured ferrocomposite consisting of immobilized superparamagnetic nanoparticles

Wide use of magnetic nanoparticles in modern technologies and biomedical applications requires reliable theoretical models capable of predicting physical properties. Solidification of a ferroparticle suspension under the action of permanent magnetic field allows us to obtain a ferrocomposite, characterized by some orientational texture of the nanoparticle easy magnetization axes. The static magnetic response of this ferrocomposite differs from that of the parent magnetic suspension due to "freezing" of nanoparticle translational and rotational degrees of freedom. Here the superparamagnetic fluctuations of the nanoparticle magnetic moments play a key role in the formation of the ferrocomposite magnetic response depending on the degree of orientational ordering, obtained during synthesis of a ferrocomposite. With the help of statistical mechanics we calculate the magnetization and the initial magnetic susceptibility of the textured ferrocomposite for various temperatures and magnetic field strengths. The easy axis texturing leads to a significant increase of the magnetic properties, and the effect intensifies with the growth of nanoparticle magnetocrystalline anisotropy. Theoretical predictions are supported by Monte Carlo simulations. The obtained results evidence that the texturing of a ferroparticle suspension and transforming it into a textured ferrocomposite are a real way to enhance the magnetic response of these magnetic soft materials.

Adsorption of Organic Dyes on Magnetic Iron Oxide Nanoparticles. Part II: Field-Induced Nanoparticle Agglomeration and Magnetic Separation

This paper (part II) is devoted to the effect of molecular adsorption on the surface of magnetic iron oxide nanoparticles (IONP) on the enhancement of their (secondary) field-induced agglomeration and magnetic separation. Experimentally, we use Methylene Blue (MB) cationic dye adsorption on citrate-coated maghemite nanoparticles to provoke primary agglomeration of IONP in the absence of the field. The secondary agglomeration is manifested through the appearance of needlelike micron-sized agglomerates in the presence of an applied magnetic field. With the increasing amount of adsorbed MB molecules, the size of the field-induced agglomerates increases and the magnetic separation on a magnetized micropillar becomes more efficient. These effects are mainly governed by the ratio of magnetic-to-thermal energy α, suspension supersaturation Δ₀, and Brownian diffusivity D_eff of primary agglomerates. The three parameters (α, Δ₀, and D_eff) are implicitly related to the surface coverage θ of IONP by MB molecules through the hydrodynamic size of primary agglomerates exponentially increasing with θ. Experiments and developed theoretical models allow quantitative evaluation of the θ effect on the efficiency of the secondary agglomeration and magnetic separation.

Influence of size polydispersity on magnetic field tunable structures in magnetic nanofluids containing superparamagnetic nanoparticles

We probe the influence of particle size polydispersity on field-induced structures and structural transitions in magnetic fluids (ferrofluids) using phase contrast optical microscopy, light scattering and Brownian dynamics simulations. Three different ferrofluids containing superparamagnetic nanoparticles of different polydispersity indices (PDIs) are used. In a ferrofluid with a high PDI (∼0.79), thin chains, thick chains, and sheets are formed on increasing the in-plane magnetic field, whereas isotropic bubbles, and hexagonal and lamellar/stripe structures are formed on increasing the out-of-plane magnetic field over the same range. In contrast, no field-induced aggregates are seen in the sample with low polydispersity under the above conditions. In a polydisperse sample, bubbles are formed at a very low magnetic field strength of 30 G. Insights into the structural evolution with increasing magnetic field strength are obtained by carrying out Brownian dynamics simulations. The crossovers from isotropic, through hexagonal columnar, to lamellar/stripe structures observed with increasing field strength in the high-polydispersity sample indicate the prominent roles of large, more strongly interacting particles in structural transitions in ferrofluids. Based on the observed microstructures, a phase diagram is constructed. Our work opens up new opportunities to develop optical devices and access diverse structures by tuning size polydispersity.

Spatial self-phase modulation of a Gaussian beam transmitted through a ferrofluid

We report on the experimental observation of the diffraction pattern formed in the far-field region when a high-power continuous-wave laser convergent or divergent Gaussian beam passes through a cuvette with ferrofluid. Two different types of diffraction rings with opposite light-intensity distribution are shown in the far field. The difference between the diffractive patterns is attributed to the interaction of the strong spatial self-phase modulation caused by the refractive index change of the medium with wavefront curvature of the input Gaussian beam. The observed behavior of the diffraction pattern dynamics is interpreted theoretically based on the Fresnel-Kirchhoff integral. The negative polarity of nonlinear refraction can be identified by the central interference profiles and the diffraction pattern. At the same time, the self-defocusing phenomena of the ferrofluid can be determined by the type of pattern. The nonlinear refraction coefficients of the ferrofluid were estimated to be ∼-2.89×10^-5cm²/W (convergent Gaussian beam) and ∼-3.53×10^-5cm²/W (divergent Gaussian beam). In addition, the corresponding third-order nonlinear optical susceptibility of the sample was also estimated as ∼1.43×10^-5esu and ∼1.75×10^-5esu, respectively. The experimental results imply a novel potential application of ferrofluid in nonlinear phase modulation devices.

Dispersible and manipulable magnetic L10-FePt nanoparticles

Oriented single-domain magnetic nanoparticles with a high remanence ratio M_r/M_s and maximum magnetic energy product (BH)_max have attracted immense attention. However, nanoparticles easily agglomerate due to their extremely small size, which impedes the process of orientation. So manipulating the orientation of nanoparticles is still a key challenge. Here, L1₀-FePt single-domain nanoparticles were successfully synthesized by a chemical method in the liquid phase and nanoparticle-based anisotropic nanocomposites were obtained by dispersing the nanoparticles in liquid epoxy resin under an external magnetic field. The main factors that impact the orientation of L1₀-FePt single-domain nanoparticles were investigated further. It is found that the dispersibility of nanoparticles has a great impact on the degree of orientation, so do the applied magnetic field and the concentration of nanoparticles. Nanocomposites with homodisperse nanoparticles oriented under a suitable external magnetic field exhibit excellent magnetic performance, such as high coercivity H_c and remanence M_r, which gives the nanocomposites a higher (BH)_max than the isotropic samples. The anisotropic nanocomposites show great potential in multifarious permanent magnet applications and fundamental research.

Effect of hydrophilic silica nanoparticles on the magnetorheological properties of ferrofluids: a study using opto-magnetorheometer

For many technological applications of ferrofluids, the magnetorheological properties require being precisely controlled. We study the effect of hydrophilic silica on the magnetorheology of an oil-based ferrofluid containing Fe3O4 nanoparticles of size ∼10 nm. We observe that the presence of silica nanoparticles lowers the yield stresses, viscoelastic moduli, and shear thinning behavior of the ferrofluid because of the weakening of dipolar interactions, which was evident from the observed lower yield stresses exponent (<2). The ferrofluid containing silica exhibits a dominant elastic behavior, a reduced hysteresis during the forward and reverse magnetic field sweeps, and a longer linear viscoelastic regime under nonlinear deformation. The Mason number plots at low shear rates and magnetic fields show deviations from the master curve in the presence of silica. The magnetic field induced microstructures, visualized using opto-magnetorheometer, showed columnar aggregate structures along the field directions, which are reoriented along the shear flow direction at high shear rates. The image analysis shows that the average thickness of the columnar aggregates in pure ferrofluid is much larger than that of the mixed system, which suggests that the intervening silica matrix hampers the zippering transition of columns at higher magnetic field and shear rates. Our results suggest that optimization of rheological properties of ferrofluids is possible by carefully adding suitable silica nanoparticles, which may find practical applications such as dynamic seals, heat transfer, sensors, and opto-fluidic devices, etc.

Magnetorheological properties of a magnetic nanofluid with dispersed carbon nanotubes

We investigate the effect of multiwalled carbon nanotubes (MWCNTs) on the magnetorheological properties of an oil based magnetic nanofluid (ferrofluid). The shear resistant plateau observed in a pure ferrofluid disappears when 0.5 wt% of MWCNT is incorporated. The yield stress values of the composite system are slightly smaller than that of the pure system. This shows that the presence of carbon nanotubes (CNTs) weakens the magnetic field induced microstructure of the ferrofluid due to their interaction that affects the hydrodynamic and magnetic interactions between the dispersed nanoparticles. Interestingly, the Mason number plots for both the pure and composite system show scaling of the viscosity curves onto a single master curve for magnetic fields of 80 mT and above while deviations are observed for lower magnetic fields. The weakening of the ferrofluid microstructure in the presence of CNTs is further evident in the amplitude sweep measurements where the linear viscoelastic region develops only at a higher magnetic field strength compared to lower magnetic fields in pure ferrofluids. These results are useful for tailoring ferrofluids with a faster response for various applications.

Enhanced transmission with tunable Fano-like profile in magnetic nanofluids

We observe a Fano-like resonance in a magnetically polarizable nanofluid. Under an external magnetic field, the transmittance spectrum of a ferrofluid emulsion containing droplet size of ~220 nm shows an enhanced peak with a Fano-like profile, which is attributed to a localized waveguide resonance from random array of tubes with charged inner surface that are formed by the alignment of the droplets. Furthermore, by varying the magnetic field, the Fano profile is tuned and an opaque emulsion is turned into a transparent one. This finding may have interesting applications in tunable photonic devices.