Opposing effects of cationic antimicrobial peptides and divalent cations on bacterial lipopolysaccharides

Evaluation of the synergistic potential and mechanisms of action for de novo designed cationic antimicrobial peptides

Antimicrobial peptides (AMPs) have emerged as promising candidates in combating antimicrobial resistance - a growing issue in healthcare. However, to develop AMPs into effective therapeutics, a thorough analysis and extensive investigations are essential. In this study, we employed an in silico approach to design cationic AMPs de novo, followed by their experimental testing. The antibacterial potential of de novo designed cationic AMPs, along with their synergistic properties in combination with conventional antibiotics was examined. Furthermore, the effects of bacterial inoculum density and metabolic state on the antibacterial activity of AMPs were evaluated. Finally, the impact of several potent AMPs on E. coli cell envelope and genomic DNA integrity was determined. Collectively, this comprehensive analysis provides insights into the unique characteristics of cationic AMPs.

BsR1, a broad-spectrum antibacterial peptide with potential for plant protection

IMPORTANCE

This study addresses the critical need for new antibacterial drugs in the face of bacterial multidrug resistance resulting from antibiotic overuse. It highlights the significance of antimicrobial peptides as essential components of innate immunity in animals and plants, which have been proven effective against multidrug-resistant bacteria and are difficult to develop resistance against. This study successfully synthesizes a broad-spectrum antibacterial peptide, BsR1, with strong inhibitory activities against various Gram-positive and Gram-negative bacteria. BsR1 demonstrates favorable stability and a mode of action that damages bacterial cell membranes, leading to cell death. It also exhibits biological safety and shows potential in enhancing disease resistance in rice. This research offers a novel approach and potential medication for antibacterial drug development, presenting a valuable tool in combating pathogenic microorganisms, particularly in plants.

In-depth biological characterization of two black soldier fly anti-Pseudomonas peptides reveals LPS-binding and immunomodulating effects

As effector molecules of the innate immune system, antimicrobial peptides (AMPs) have gathered substantial interest as a potential future generation of antibiotics. Here, we demonstrate the anti-Pseudomonas activity and lipopolysaccharide (LPS)-binding ability of HC1 and HC10, two cecropin peptides from the black soldier fly (Hermetia Illucens). Both peptides are active against a wide range of Pseudomonas aeruginosa strains, including drug-resistant clinical isolates. Moreover, HC1 and HC10 can bind to lipid A, the toxic center of LPS and reduce the LPS-induced nitric oxide and cytokine production in murine macrophage cells. This suggests that the peptide-LPS binding can also lower the strong inflammatory response associated with P. aeruginosa infections. As the activity of AMPs is often influenced by the presence of salts, we studied the LPS-binding activity of HC1 and HC10 in physiological salt concentrations, revealing a strong decrease in activity. Our research confirmed the early potential of HC1 and HC10 as starting points for anti-Pseudomonas drugs, as well as the need for structural or formulation optimization before further preclinical development can be considered. IMPORTANCE The high mortality and morbidity associated with Pseudomonas aeruginosa infections remain an ongoing challenge in clinical practice that requires urgent action. P. aeruginosa mostly infects immunocompromised individuals, and its prevalence is especially high in urgent care hospital settings. Lipopolysaccharides (LPSs) are outer membrane structures that are responsible for inducing the innate immune cascade upon infection. P. aeruginosa LPS can cause local excessive inflammation, or spread systemically throughout the body, leading to multi-organ failure and septic shock. As antimicrobial resistance rates in P. aeruginosa infections are rising, the research and development of new antimicrobial agents remain indispensable. Especially, antimicrobials that can both kill the bacteria themselves and neutralize their toxins are of great interest in P. aeruginosa research to develop as the next generation of drugs.

Combined Use of Antimicrobial Peptides with Antiseptics against Multidrug-Resistant Bacteria: Pros and Cons

Antimicrobial peptides (AMPs) are acknowledged as a promising template for designing new antimicrobials. At the same time, existing toxicity issues and limitations in their pharmacokinetics make topical application one of the less complicated routes to put AMPs-based therapeutics into actual medical practice. Antiseptics are one of the common components for topical treatment potent against antibiotic-resistant pathogens but often with toxicity limitations of their own. Thus, the interaction of AMPs and antiseptics is an interesting topic that is also less explored than combined action of AMPs and antibiotics. Herein, we analyzed antibacterial, antibiofilm, and cytotoxic activity of combinations of both membranolytic and non-membranolytic AMPs with a number of antiseptic agents. Fractional concentration indices were used as a measure of possible effective concentration reduction achievable due to combined application. Cases of both synergistic and antagonistic interaction with certain antiseptics and surfactants were identified, and trends in the occurrence of these types of interaction were discussed. The data may be of use for AMP-based drug development and suggest that the topic requires further attention for successfully integrating AMPs-based products in the context of complex treatment. AMP/antiseptic combinations show promise for creating topical formulations with improved activity, lowered toxicity, and, presumably, decreased chances of inducing bacterial resistance. However, careful assessment is required to avoid AMP neutralization by certain antiseptic classes in either complex drug design or AMP application alongside other therapeutics/care products.

Evaluation of the Antimicrobial Activity in Host-Mimicking Media and In Vivo Toxicity of Antimicrobial Polymers as Functional Mimics of AMPs

Activity tests for synthetic antimicrobial compounds are often limited to the minimal inhibitory concentration assay using standard media and bacterial strains. In this study, a family of acrylamide copolymers that act as synthetic mimics of antimicrobial peptides were synthesized and shown to have a disruptive effect on bacterial membranes and structural integrity through microscopy techniques and membrane polarization experiments. The polymers were tested for their antimicrobial properties using media that mimic clinically relevant conditions. Additionally, their activity was compared in two different strains of the Gram-positive bacterium Staphylococcus aureus and the Gram-negative bacterium Pseudomonas aeruginosa. We showed that the medium composition can have an important influence on the polymer activity as there was a considerable reduction in minimal inhibitory concentrations against S. aureus grown in synthetic wound fluid (SWF), and against P. aeruginosa grown in synthetic cystic fibrosis sputum media (SCFM), compared to the concentrations in standard testing media. In contrast, we observed a complete loss of activity against P. aeruginosa in the serum-containing SWF. Finally, we made use of an emerging invertebrate in vivo model, using Galleria mellonella larvae, to assess toxicity of the polymeric antimicrobials, showing a good correlation with cell line toxicity measurements and demonstrating its potential in the evaluation of novel antimicrobial materials.

Effect of amino acid substitutions on 70S ribosomal binding, cellular uptake, and antimicrobial activity of oncocin Onc112

Proline‐rich antimicrobial peptides (PrAMPs) are promising candidates for the treatment of infections caused by high‐priority human pathogens. Their mode of action consists of (I) passive diffusion across the outer membrane, (II) active transport through the inner membrane, and (III) inhibition of protein biosynthesis by blocking the exit tunnel of the 70S ribosome. We tested whether in vitro data on ribosomal binding and bacterial uptake could predict the antibacterial activity of PrAMPs against Gram‐negative and Gram‐positive bacteria. Ribosomal binding and bacterial uptake rates were measured for 47 derivatives of PrAMP Onc112 and compared to the minimal inhibitory concentrations (MIC) of each peptide. Ribosomal binding was evaluated for ribosome extracts from four Gram‐negative bacteria. Bacterial uptake was assessed by quantifying each peptide in the supernatants of bacterial cultures. Oncocin analogues with a higher net positive charge appeared to be more active, although their ribosome binding and uptake rates were not necessarily better than for Onc112. The data suggest a complex mode of action influenced by further factors improving or reducing the antibacterial activity, including diffusion through membranes, transport mechanism, secondary targets, off‐target binding, intracellular distribution, and membrane effects. Relying only on in vitro binding and uptake data may not be sufficient for the rational development of more active analogues.

Modeling the Protective Role of Bacterial Lipopolysaccharides against Membrane-Rupturing Peptides

Lipopolysaccharide (LPS) is a key surface component of Gram-negative bacteria, populating the outer layer of their outer membrane. A number of experimental studies highlight its protective role against harmful molecules such as antibiotics and antimicrobial peptides (AMPs). In this work, we present a theoretical model for describing the interaction between LPS and cationic antimicrobial peptides, which combines the following two key features. The polysaccharide part is viewed as forming a polymer brush, exerting an osmotic pressure on inclusions such as antimicrobial peptides. The charged groups on LPS (those in lipid A and the two Kdo groups in the inner core) form electrostatic binding sites for cationic AMPs or cations. Using the resulting model, we offer a quantitative picture of how the brush component enhances the protective role of LPS against magainin-like peptides, in the presence of divalent cations such as Mg²⁺. The LPS brush tends to diminish the interfacial binding of the peptides, at the lipid headgroup region, by about 30%. In the presence of 5 mM of Mg²⁺, the interfacial binding does not reach a threshold value for wild-type LPS, beyond which the LPS layer is ruptured, even though it does for LPS Re (the simplest form of LPS, lacking the brush part), as long as [AMP] ≤ 20 μM, where [AMP] is the concentration of AMPs. At a low concentration of Mg²⁺ (≈1 mM), however, a smaller [AMP] value (≳2 μM) is needed to reach the threshold coverage for wild-type LPS. Our results also suggest that the interfacial binding of peptides is insensitive to their possible weak interaction with the surrounding brush chains.

Apoptosis-like death-inducing property of tachyplesin I in Escherichia coli

 Antimicrobial peptide (AMP) derived from the horseshoe crab, tachyplesin I (KWCFRVCYRGICYRRCR-NH₂ ), displayed the apparent antimicrobial activity with low cytotoxicity, suggesting its efficacy as an attractive agent but still lacks the understandings regarding its mechanism(s). Hence, the study focused on investigating the antibacterial mode of action of tachyplesin I against Escherichia coli. Based on the reactive oxygen species generation displayed in several antimicrobial effects, the detection of superoxide anion and nitric oxide were verified after tachyplesin I treatment. Substantial increment of two molecules was followed by the imbalance in intracellular ion concentration, noticeably magnesium and calcium. The series of stages led to hydroxyl radical generation with reduced glutathione, followed by damage in DNA due to oxidative stress. Eventually, the apoptosis-like death in E. coli was monitored in DNA fragmentation-dependent manner due to the tachyplesin I treatment, verified by membrane depolarization, caspase-like protein activation, and phosphatidylserine exposure. Accordingly, tachyplesin I induces apoptosis-like death in E. coli, suggesting the potential of being a candidate for regulating bacterial infection.

Cytophaga hutchinsonii SprA and SprT Are Essential Components of the Type IX Secretion System Required for Ca2+ Acquisition, Cellulose Degradation, and Cell Motility

The type IX secretion system (T9SS) is a novel protein secretion system, which is found in and confined to the phylum Bacteroidetes. T9SS is involved in the secretion of virulence factors, cell surface adhesins, and complex biopolymer degrading enzymes to the cell surface or extracellular medium. Cytophaga hutchinsonii is a widely distributed bacterium, which is able to efficiently digest cellulose and rapidly glide along the solid surfaces. C. hutchinsonii has a full set of orthologs of T9SS components. However, the functions of most homologous proteins have not been verified. In C. hutchinsonii, CHU_0029 and CHU_2709 are similar in sequence to Flavobacterium johnsoniae T9SS components SprA and SprT, respectively. In this study, the single deletion mutants of chu_0029 (sprA) and chu_2709 (sprT) were obtained using a complex medium with the addition of Ca²⁺ and Mg²⁺. Single deletion of sprA or sprT resulted in defects in cellulose utilization and gliding motility. Moreover, the ΔsprA and ΔsprT mutants showed growth defects in Ca²⁺- and Mg²⁺-deficient media. The results of ICP-MS test showed that both the whole cell and intracellular concentrations of Ca²⁺ were dramatically reduced in the ΔsprA and ΔsprT mutants, indicating that SprA and SprT are both important for the assimilation of trace amount of Ca²⁺. While the assimilation of Mg²⁺ was not obviously influenced in the ΔsprA and ΔsprT mutants. Through proteomics analysis of the cell surface proteins of the wild type and mutants, we found that the ΔsprA and ΔsprT mutants were defective in secretion of the majority of T9SS substrates. Together, these results indicate that SprA and SprT are both essential components of C. hutchinsonii T9SS, which is required for protein secretion, Ca²⁺ acquisition, cellulose degradation, and gliding motility in C. hutchinsonii. Our study shed more light on the functions of SprA and SprT in T9SS, and further proved the link between the T9SS and Ca²⁺ uptake system.

Multiple Mechanisms of the Synthesized Antimicrobial Peptide TS against Gram-Negative Bacteria for High Efficacy Antibacterial Action In Vivo

The emergence of drug-resistant bacteria emphasizes the urgent need for novel antibiotics. The antimicrobial peptide TS shows extensive antibacterial activity in vitro and in vivo, especially in gram-negative bacteria; however, its antibacterial mechanism is unclear. Here, we find that TS without hemolytic activity disrupts the integrity of the outer bacterial cell membrane by displacing divalent cations and competitively binding lipopolysaccharides. In addition, the antimicrobial peptide TS can inhibit and kill E. coli by disintegrating the bacteria from within by interacting with bacterial DNA. Thus, antimicrobial peptide TS’s multiple antibacterial mechanisms may not easily induce bacterial resistance, suggesting use as an antibacterial drug to be for combating bacterial infections in the future.

Role of lipopolysaccharides and lipoteichoic acids on C-Chrysophsin-1 interactions with model Gram-positive and Gram-negative bacterial membranes

Antimicrobial peptides (AMPs) are attractive as biomaterial coatings because they have broad spectrum activity against different microbes, with a low likelihood of incurring antimicrobial resistance. Direct action against the bacterial membrane is the most common mechanism of action (MOA) of AMPs, with specific MOAs dependent on membrane composition, peptide concentration, and environmental factors that include temperature. Chrysophsin-1 (CHY1) is a broad spectrum salt-tolerant AMP that is derived from a marine fish. A cysteine modification was made to the peptide to facilitate attachment to a surface, such as a biomedical device. The authors used quartz crystal microbalance with dissipation monitoring to study how temperature (23 and 37 °C) and lipid composition influence the MOA of cysteine-modified peptide (C-CHY1) with model membranes comprised of supported lipid bilayers (SLBs). These two temperatures were used so that the authors could better understand the differences in behavior between typical lab temperatures and physiologic conditions. The authors created model membranes that mimicked properties of Gram-negative and Gram-positive bacteria in order to understand how the mechanisms might differ for different types of bacterial systems. SLB models of Gram-positive bacterial membranes were formed using combinations of phosphatidylcholine, phosphatidylglycerol (PG), and S. aureus-derived lipoteichoic acid (LTA). SLB models of Gram-negative bacterial membranes were formed using combinations of phosphatidylethanolamine (PE), PG, and E. coli-derived lipopolysaccharides (LPS). The molecules that distinguish Gram-positive and Gram-negative membranes (LTA and LPS) have the potential to alter the MOA of C-CHY1 with the SLBs. The authors' results showed that the MOA for the Gram-positive SLBs was not sensitive to temperature, but the LTA addition did have an effect. Specifically, similar trends in frequency and dissipation changes across all overtones were observed, and the same mechanistic trends were observed in the polar plots at 23 and 37 °C. However, when LTA was added, polar plots showed an association between C-CHY1 and LTA, leading to SLB saturation. This was demonstrated by significant changes in dissipation, while the frequency (mass) was not increasing after the saturation point. For the Gram-negative SLBs, the composition did not have a significant effect on MOA, but the authors saw more differences between the two temperatures studied. The authors believe this is due to the fact that the gel-liquid crystal transition temperature of PE is 25 °C, which means that the bilayer is more rigid at 23 °C, compared to temperatures above the transition point. At 23 °C, a significant energetic shift would be required to allow for additional AMP insertion. This could be seen in the polar plots, where there was a steep slope but there was very little mass addition. At 37 °C, the membrane is more fluid and there is less of an energetic requirement for insertion. Therefore, the authors observed greater mass addition and fewer changes in dissipation. A better understanding of C-CHY1 MOA using different SLB models will allow for the more rational design of future therapeutic solutions that make use of antimicrobial peptides, including those involving biomaterial coatings.

Toward building a physical model for membrane selectivity of antimicrobial peptides: making a quantitative sense of the selectivity

Antimicrobial peptides (AMPs) are naturally-occurring peptide antibiotics. AMPs are typically cationic and utilize their electrostatic interactions with the bacterial membrane to selectively attack bacteria. The way they work has inspired a vigorous search for optimized peptides for fighting resistant bacteria. Here, we present a physical model of membrane selectivity of AMPs. The challenge for theoretical modeling of membrane-peptide systems arises from the simultaneous presence of several competing effects, including lipid demixing and peptide-peptide interactions on the membrane surface. We first examine critically a number of models of peptide-membrane interactions and map out one, which incorporates adequately these competing effects as well as the geometry of various regions in membranes, occupied by bound peptides, anionic lipids within the interaction range of each peptide, and those outside this range. This effort leads to a systematically-improved model for peptide selectivity. Using the model, we relate peptide's intrinsic (Ccell-independent) selectivity to an apparent, Ccell-dependent one, and clarify the relative roles of peptide parameters and cell densities in determining their selectivity. This relationship suggests that the selectivity is more sensitive to peptide parameters at low cell densities; as a result, the optimal peptide charge, at which the selectivity is maximized, increases with the cell density in such a manner that this notion becomes less meaningful at high cell densities.

The Mechanisms of Action of Cationic Antimicrobial Peptides Refined by Novel Concepts from Biophysical Investigations

Even 30 years after the discovery of magainins, biophysical and structural investigations on how these peptides interact with membranes can still bear surprises and add new interesting detail to how these peptides exert their antimicrobial action. Early on, using oriented solid-state NMR spectroscopy, it was found that the amphipathic helices formed by magainins are active when being oriented parallel to the membrane surface. More recent investigations indicate that this in-planar alignment is also found when PGLa and magainin in combination exert synergistic pore-forming activities, where studies on the mechanism of synergistic interaction are ongoing. In a related manner, the investigation of dimeric antimicrobial peptide sequences has become an interesting topic of research which bears promise to refine our views how antimicrobial action occurs. The molecular shape concept has been introduced to explain the effects of lipids and peptides on membrane morphology, locally and globally, and in particular of cationic amphipathic helices that partition into the membrane interface. This concept has been extended in this review to include more recent ideas on soft membranes that can adapt to external stimuli including membrane-disruptive molecules. In this manner, the lipids can change their shape in the presence of low peptide concentrations, thereby maintaining the bilayer properties. At higher peptide concentrations, phase transitions occur which lead to the formation of pores and membrane lytic processes. In the context of the molecular shape concept, the properties of lipopeptides, including surfactins, are shortly presented, and comparisons with the hydrophobic alamethicin sequence are made.

Biophysical Investigations Elucidating the Mechanisms of Action of Antimicrobial Peptides and Their Synergism

Biophysical and structural investigations are presented with a focus on the membrane lipid interactions of cationic linear antibiotic peptides such as magainin, PGLa, LL37, and melittin. Observations made with these peptides are distinct as seen from data obtained with the hydrophobic peptide alamethicin. The cationic amphipathic peptides predominantly adopt membrane alignments parallel to the bilayer surface; thus the distribution of polar and non-polar side chains of the amphipathic helices mirror the environmental changes at the membrane interface. Such a membrane partitioning of an amphipathic helix has been shown to cause considerable disruptions in the lipid packing arrangements, transient openings at low peptide concentration, and membrane disintegration at higher peptide-to-lipid ratios. The manifold supramolecular arrangements adopted by lipids and peptides are represented by the 'soft membranes adapt and respond, also transiently' (SMART) model. Whereas molecular dynamics simulations provide atomistic views on lipid membranes in the presence of antimicrobial peptides, the biophysical investigations reveal interesting details on a molecular and supramolecular level, and recent microscopic imaging experiments delineate interesting sequences of events when bacterial cells are exposed to such peptides. Finally, biophysical studies that aim to reveal the mechanisms of synergistic interactions of magainin 2 and PGLa are presented, including unpublished isothermal titration calorimetry (ITC), circular dichroism (CD) and dynamic light scattering (DLS) measurements that suggest that the peptides are involved in liposome agglutination by mediating intermembrane interactions. A number of structural events are presented in schematic models that relate to the antimicrobial and synergistic mechanism of amphipathic peptides when they are aligned parallel to the membrane surface.