Electromagnetically induced transparency and absorption in metamaterials: the radiating two-oscillator model and its experimental confirmation

Highly Sensitive Terahertz Metasurface Based on Electromagnetically Induced Transparency-Like Resonance in Detection of Skin Cancer Cells

Terahertz (THz) metasurfaces based on high Q-factor electromagnetically induced transparency-like (EIT-like) resonances are promising for biological sensing. Despite this potential, they have not often been investigated for practical differentiation between cancerous and healthy cells. The present methodology relies mainly on refractive index sensing, while factors of transmission magnitude and Q-factor offer significant information about the tumors. To address this limitation and improve sensitivity, we fabricated a THz EIT-like metasurface based on asymmetric resonators on an ultra-thin and flexible dielectric substrate. Bright-dark modes coupling at 1.96 THz was experimentally verified, and numerical results and theoretical analysis were presented. An enhanced theoretical sensitivity of 550 GHz/RIU was achieved for a sample with a thickness of 13 µm due to the ultra-thin substrate and novel design. A two-layer skin model was generated whereby keratinocyte cell lines were cultured on a base of collagen. When NEB1-shPTCH (basal cell carcinoma (BCC)) were switched out for NEB1-shCON cell lines (healthy) and when BCC's density was raised from 1 × 105 to 2.5 × 105, a frequency shift of 40 and 20 GHz were observed, respectively. A combined sensing analysis characterizes different cell lines. The findings may open new opportunities for early cancer detection with a fast, less-complicated, and inexpensive method.

Mid-Infrared Gas Sensing Based on Electromagnetically Induced Transparency in Coupled Plasmonic Resonators

The existence of surface plasmon polaritons in doped silicon micro-scale structures has opened up new and innovative possibilities for applications, such as sensing, imaging, and photonics. A CMOS-compatible doped Si plasmonic sensor is proposed and investigated. The plasmon resonance can be tuned by controlling the carrier density and dopant concentration. In this paper, we demonstrate that using silicon doped with phosphorus at a concentration of 5 × 1020 cm-3 can induce surface plasmon resonance in the mid-infrared region. Two ring resonators of two different radii based on metal-insulator-metal waveguide structures are studied individually. Then, the two ring resonators are integrated in the same device. When the two ring resonators are coupled and resonate at the same frequency; two distinct resonance spectral lines are generated with striking features that improve its potential use for sensing and modulation applications. The propagating plasmonic mode is studied, including its mode profile and bend loss. We evaluate the effectiveness of a microstructure gas sensor with dimensions of 15 μm × 15 μm by measuring its sensitivity and selectivity towards methane and ethane gases. Small alterations in the surrounding refractive index led to noticeable shifts in the resonance peak. The sensor achieved a sensitivity of 7539.9 nm/RIU at the mid-infrared spectral range around the 7.7 μm wavelength. Furthermore, by combining the resonators, we can achieve a smaller full width at half maximum (FWHM), which will ultimately result in greater sensitivity than using a single-ring resonator or other plasmonic resonator configurations. Once the sensitivity and selectivity of the sensor are measured, the FOM can be calculated by dividing the sensitivity by the selectivity of the sensor, resulting in an FOM of 6732.

Electromagnetically Induced Absorption Overcomes the Upper Limit of Light Absorption: Dipole-Dipole Coupling with Phase Retardation in Plasmonic-Dielectric Dimers

Electromagnetically induced absorption (EIA) by a phase-retarded coupling is theoretically investigated using a dimer composed of a plasmonic and dielectric particle. This phase-retarded coupling originates from the particles interacting with each other through their scattered intermediate fields (in between near and far fields). Our analysis based on the coupled-dipole method and an extended coupled-oscillator model indicates that EIA by the phase-retarded coupling occurs due to constructive interference in the scattered fields of the particles. By employing the finite element method, we demonstrate that the absorption of the plasmonic particle is dramatically enhanced by tuning the interparticle distance and achieving constructive interference. In contrast to EIA by near-field coupling, which has been intensively researched using coupled plasmonic systems, EIA by a phase-retarded coupling enables us to strengthen the absorption of plasmonic systems more significantly. This significant absorption enhancement is expected to be beneficial to advancing various applications, such as energy harvesting and radiative cooling.

Slot driven dielectric electromagnetically induced transparency metasurface

The control of resonant metasurface for electromagnetically induced transparency (EIT) offers unprecedented opportunities to tailor lightwave coupling at the nanoscale leading to many important applications including slow light devices, optical filters, chemical and biosensors. However, the realization of EIT relies on the high degree of structural asymmetry by positional displacement of optically resonant structures, which usually lead to low quality factor (Q-factor) responses due to the light leakage from structural discontinuity from asymmetric displacements. In this work, we demonstrate a new pathway to create high quality EIT metasurface without any displacement of constituent resonator elements. The mechanism is based on the detuning of the resonator modes which generate dark-bright mode interference by simply introducing a slot in metasurface unit cells (meta-atoms). More importantly, the slot diameter and position on the meta-atom can be modulated to tune the transmittance and quality factor (Q-factor) of the metasurface, leading to a Q-factor of 1190 and near unity transmission at the same time. Our work provides a new degree of freedom in designing optically resonant elements for metamaterials and metasurfaces with tailored wave propagation and properties.

Bound chiral magnonic polariton states for ideal microwave isolation

Bound states in the continuum (BICs) present a unique solution for eliminating radiation loss. So far, most reported BICs are observed in transmission spectra, with only a few exceptions being in reflection spectra. The correlation between reflection BICs (r-BICs) and transmission BICs (t-BICs) remains unclear. Here, we report the presence of both r-BICs and t-BICs in a three-mode cavity magnonics. We develop a generalized framework of non-Hermitian scattering Hamiltonians to explain the observed bidirectional r-BICs and unidirectional t-BICs. In addition, we find the emergence of an ideal isolation point in the complex frequency plane, where the isolation direction can be switched by fine frequency detuning, thanks to chiral symmetry protection. Our results demonstrate the potential of cavity magnonics and also extend the conventional BICs theory through the application of a more generalized effective Hamiltonians theory. This work offers an alternative idea for designing functional devices in general wave optics.

Non-Hermitian control between absorption and transparency in perfect zero-reflection magnonics

Recent works in metamaterials and transformation optics have demonstrated exotic properties in a number of open systems, including perfect absorption/transmission, electromagnetically induced transparency, cloaking or invisibility, etc. Meanwhile, non-Hermitian physics framework has been developed to describe the properties of open systems, however, most works related to this focus on the eigenstate properties with less attention paid to the reflection characteristics in complex frequency plane, despite the usefulness of zero-reflection (ZR) for applications. Here we demonstrate that the indirectly coupled two-magnon system not only exhibits non-Hermitian eigenmode hybridization, but also ZR states in complex frequency plane. The observed perfect-ZR (PZR) state, i.e., ZR with pure real frequency, is manifested as infinitely narrow reflection dips (~67 dB) with infinite group delay discontinuity. This reflection singularity of PZR distinguishes from the resonant eigenstates but can be adjusted on or off resonance with the eigenstates. Accordingly, the absorption and transmission can be flexibly tuned from nearly full absorption (NFA) to nearly full transmission (NFT) regions.

Sign flips, crossovers, and spatial inversions in surface plasmon resonance across a chiral-metal interface

We consider the surface plasmon resonance established along an interface between a metal and a chiral medium (chiral case). Resulting solutions are compared with those obtained for a metal-dielectric interface (achiral case). We found that the chiral case exhibits either larger or smaller phase speeds than the achiral case due to the energy redistribution between translation and rotation. For a loss-free system, we found crossovers among the dispersion curves and spatial inversions in field profiles. These features are associated with anti-symmetric spin flips with respect to medium chirality. The short-wavelength limit leads to an upper bound on the medium chirality.

Perfect optical absorption in a single array of folded graphene ribbons

Due to its one atom thickness, optical absorption (OA) in graphene is a fundamental and challenging issue. Practically, the patterned graphene-dielectric-metal structure is commonly used to achieve perfect OA (POA). In this work, we propose a novel scenario to solve this issue, in which POA is obtained by using free-standing folded graphene ribbons (FGRs). We show several local resonances, e.g. a dipole state (Mode-I) and a bound state in continuum (BIC, Mode-II), will cause very efficient OA. At normal incidence, by choosing appropriate folding angle θ, 50% absorptance by the two states is easily achieved; at oblique incidence, the two states will result in roughly 98% absorptance as incidence angle φ≈40^∘. It is also interesting to see that the system has asymmetric OA spectra, e.g. POA of the former (latter) state existing in reverse (forward) incidence, respectively. Besides the angles θ and φ, POA here can also be actively tuned by electrostatic gating. As increasing Fermi level, POA of Mode-I will undergo a gradual blueshift, while that of Mode-II will experience a rapid blueshift and then be divided into three branches, due to Fano coupling to two guided modes. In reality, the achieved POA is well maintained even the dielectric substrates are used to support FGRs. Our work offers a remarkable scenario to achieve POA, and thus enhance light-matter interaction in graphene, which can build an alternative platform to study novel optical effects in general two-dimensional (2D) materials. The folding, mechanical operation in out-of-plane direction, may emerge as a new degree of freedom for optoelectronic device applications based on 2D materials.

Anomalous Absorption in Arrays of Metallic Nanoparticles: A Powerful Tool for Quantum Dot Optoelectronics

Periodic arrays of noble metal nanoparticles are emblematic nanostructures in photonics. Their ability to sustain localized surface plasmon resonances has been used throughout the years to demonstrate a variety of passive and active functionalities such as enhanced luminescence in dipolar media and LEDs as well as higher responsivities in photoconductive detectors. Here, we show that additional magnetic resonances, associated with inductive current loops between the nanoparticles and accessible with transverse electric waves, emerge in the limit of dense arrays with subwavelength periods. Moreover, their interplay with the plasmons of the system results in spectrally sharp analogues of electromagnetically induced absorption (EIA). We use these metasurfaces to induce changes and enhancements in the emission, absorption, photoconduction, and polarization properties of active layers of PbS nanocrystals, illustrating the potential of EIA beyond the passive functionalities demonstrated so far in literature.

Dynamically dual-tunable dual-band to four-band metamaterial absorbers based on bulk Dirac semimetal and vanadium dioxide

In this work, we investigate dynamically dual-tunable dual-band, triple-band, and four-band metamaterial absorbers (MAs) based on a bulk Dirac semimetal (BDS) and vanadium dioxide (VO₂). Due to the bright-bright mode coupling between BDS rods, the dual-band, triple-band, and four-band MAs can be realized when the VO₂ is in a fully metallic state. The average absorptivity of the absorption peaks in the three MAs reaches 97%, 98.6%, and 96.4% respectively. The physical mechanism can be explained by the radiating two-oscillator model. The resonant frequencies and absorptance intensities at absorption peaks in each MA can be dynamically tuned by varying the BDS Fermi energy and the VO₂ conductivity.

Optomechanical Anti-Lasing with Infinite Group Delay at a Phase Singularity

Singularities which symbolize abrupt changes and exhibit extraordinary behavior are of a broad interest. We experimentally study optomechanically induced singularities in a compound system consisting of a three-dimensional aluminum superconducting cavity and a metalized high-coherence silicon nitride membrane resonator. Mechanically induced coherent perfect absorption and anti-lasing occur simultaneously under a critical optomechanical coupling strength. Meanwhile, the phase around the cavity resonance undergoes an abrupt π-phase transition, which further flips the phase slope in the frequency dependence. The observed infinite discontinuity in the phase slope defines a singularity, at which the group velocity is dramatically changed. Around the singularity, an abrupt transition from an infinite group advance to delay is demonstrated by measuring a Gaussian-shaped waveform propagating. Our experiment may broaden the scope of realizing extremely long group delays by taking advantage of singularities.

Polarization control of plasmon-induced transparency in metamaterials with reversibly convertible bright and dark modes

We numerically demonstrate a Z-shaped metal-based metamaterial to realize an active polarization-controlled plasmon-induced transparency (PIT). The metamaterial unit cell contains two horizontal Au bars and a vertical Au bar. Simply by varying the incident light polarization, a tunable PIT can be achieved due to the reversible conversion of bright and dark modes between the horizontal and vertical Au bars. Moreover, a switchable PIT window modulation can be accomplished via changing the geometrical parameters, and the theoretical fittings according to the coupled Lorentz oscillator model display consistency with the simulated results. Our proposed metamaterials provide a promising strategy for fabricating compact PIT devices such as optical switching, sensing, and selective filters.

Analogue of Electromagnetically Induced Transparency in an All-Dielectric Double-Layer Metasurface Based on Bound States in the Continuum

Bound states in the continuum (BICs) have attracted much attention due to their infinite Q factor. However, the realization of the analogue of electromagnetically induced transparency (EIT) by near-field coupling with a dark BIC in metasurfaces remains challenging. Here, we propose and numerically demonstrate the realization of a high-quality factor EIT by the coupling of a bright electric dipole resonance and a dark toroidal dipole BIC in an all-dielectric double-layer metasurface. Thanks to the designed unique one-dimensional (D)-two-dimensional (2D) combination of the double-layer metasurface, the sensitivity of the EIT to the relative displacement between the two layer-structures is greatly reduced. Moreover, several designs for widely tunable EIT are proposed and discussed. We believe the proposed double-layer metasurface opens a new avenue for implementing BIC-based EIT with potential applications in filtering, sensing and other photonic devices.

Magnetically induced linear,nonreciprocal, and tunable transparency

We report the theoretical discovery of a new effect, namely, the effect of magnetically induced transparency. The effect is observed in a magnetically active helically structured periodical medium. Changing the external magnetic field and absorption, one can tune the frequency and the linewidth of the transparency band.

Near-Perfect Absorption of Light by Coherent Plasmon-Exciton States

We experimentally demonstrate and theoretically study the formation of coherent plasmon-exciton states which exhibit absorption of >90% of the incident light (at resonance) and cancellation of absorption. These coherent states result from the interaction between a material supporting an electronic excitation and a plasmonic structure capable of (near) perfect absorption of light. We illustrate the potential implications of these coherent states by measuring the charge separation attainable after photoexcitation. Our study opens the prospect for realizing devices that exploit coherent effects in applications.

Magnetically Induced Transparency in Media with Helical Dichroic Structure

In our paper, the magneto-optical properties of a dichroic cholesteric liquid crystal layer with large values of magneto-optical parameter g and low values of dielectric permittivity were investigated. The solutions of the dispersion equation and their peculiarities were investigated in detail. The specific properties of reflection, transmission, absorption, rotation, ellipticity spectra and also the spectra of ellipticity and azimuth of eigen polarization were investigated. The existence of a tunable linear and nonreciprocal transmission band was shown.

Highly sensitive detection of malignant glioma cells using metamaterial-inspired THz biosensor based on electromagnetically induced transparency

Metamaterial-inspired biosensors have been extensively studied recently years for fast and low-cost THz detection. However, only the variation of the resonance frequency has been closely concerned in such sensors so far, whiles the magnitude variation, which also provide important information of the analyte, has not been sufficiently analyzed. In this paper, by the observation of two degree of variations, we propose a label-free biosensing approach for molecular classification of glioma cells. The metamaterial biosensor consisting of cut wires and split ring resonators are proposed to realize polarization-independent electromagnetic induced transparency (EIT) at THz frequencies. Simulated results show that the EIT-like resonance experiences both resonance frequency and magnitude variations when the properties of analyte change, which is further explained with coupled oscillators model theory. The theoretical sensitivity of the biosensor is evaluated up to 496.01 GHz/RIU. In experiments, two types of glioma cells (mutant and wild-type) are cultured on the biosensor surface. The dependences of frequency shifts and the peak magnitude variations on the cells concentrations for different types give new perspective for molecular classification of glioma cells. The measured results indicate that the mutant and wild-type glioma cells can be distinguished directly by observing both the variations of EIT resonance frequency and magnitude at any cells concentrations without antibody introduction. Our metamaterial-based biosensor shows a great potential in the recognition of molecule types of glioma cells, opening alternative way to sensitive biosensing technology.

Wave discrimination at C-band frequencies in microstrip structures inspired by electromagnetically induced transparency

We present the design and practical implementation of a microstrip diplexer based on the wave discrimination property associated with the electromagnetically induced transparency (EIT)-like effect. The EIT is a quantum interference phenomenon which happens between two atomic transition pathways and allows wave propagation within a medium's absorption spectrum. Here, we exploit an analogous interference mechanism in a three-port microstrip structure to demonstrate a diplexer based on the EIT-like effect in the microwave regime. Since the transparency is accompanied by a high transmission and strong dispersion characteristics, compact frequency discriminating structures that can resolve nearby frequencies with high isolation can be devised. Our proposed C-band diplexer consists of pairs of unequal open-circuit stubs, which resonate at detuned frequencies and interfere to form the EIT-like passbands for diplexer action. The design is highly compact and scalable in frequency for both PCB and on-chip applications. A prototype of diplexer is fabricated for the center frequencies of lower and upper passbands at 4.6 GHz and 5.5 GHz respectively. The transmission zeros are designed at the complementary channels so that the two passbands are highly isolated presenting the isolation of about 40 dB. The measured insertion loss of lower and upper passband is 0.59 dB and 0.61 dB respectively. Measured input return loss is better than - 15 dB, while the output return losses are well below - 12 dB. Moreover, a decent value of about 200 is achieved for the group refractive index around the EIT-like passbands, which reveals the slow wave characteristics of the proposed EIT-based diplexer.

Induced transparency by interference or polarization

Polarization of optical fields is a crucial degree of freedom in the all-optical analogue of electromagnetically induced transparency (EIT). However, the physical origins of EIT and polarization-induced phenomena have not been well distinguished, which can lead to confusion in associated applications such as slow light and optical/quantum storage. Here we study the polarization effects in various optical EIT systems. We find that a polarization mismatch between whispering gallery modes in two indirectly coupled resonators can induce a narrow transparency window in the transmission spectrum resembling the EIT lineshape. However, such polarization-induced transparency (PIT) is distinct from EIT: It originates from strong polarization rotation effects and shows a unidirectional feature. The coexistence of PIT and EIT provides additional routes for the manipulation of light flow in optical resonator systems.

Optical rotation and electromagnetically induced transparency in a chiral metamaterial with C4 symmetry

We design and fabricate a double-layered chiral metamaterial with 4-fold rotational symmetry, which simultaneously exhibits optical rotation and electromagnetically induced transparency (EIT) effects. Using analytical equivalent circuit model and Lorentz's coupled oscillator model, we interpret the physical mechanisms and derive material equations. Importantly, we find that magnetic dipole and electric quadrupole play important roles in optical rotation and keeping the symmetry of the material equations. Our work offers a better understanding of optical rotation in chiral metamaterials, and provides a new and simple approach to combine optical rotation and EIT effects into a single metamaterial.

Multifunctional and tunable trigate graphene metamaterial with "Lakes of Wada" topology

Many plasmon-induced transparency (PIT) metamaterials previously reported had limited functions. Their tunabilities were realized by complex discrete structures, which greatly increased the difficulty and cost of device fabrication and adversely affected their resonance characteristics. It is an open question to adjust the Fermi levels of many graphene patterns with only a few in-plane electrodes. We propose and numerically study a novel electrically tunable and multifunctional trigate graphene metamaterial (TGGM) based on the concept of "Lakes of Wada". Benefiting from the trigate regulation, our proposed TGGM turns out to exhibit excellent characteristics, that can not only be used for terahertz band-stop filter, terahertz refractive index sensor, near-field optical switch, slow-light device, but also for double PIT window metamaterial with broad transparency windows and large tunable frequency range.

Absolute Chiral Sensing in Dielectric Metasurfaces Using Signal Reversals

Sensing molecular chirality at the nanoscale has been a long-standing challenge due to the inherently weak nature of chiroptical signals, and nanophotonic approaches have proven fruitful in accessing these signals. However, in most cases, complete sensing of the chiral part of the molecule's refractive index (magnitude and sign of both its real and imaginary part) has not been possible, while the strong inherent signals from the nanostructures themselves obscure the weak chiroptical signals. Here, we propose a dielectric metamaterial system that overcomes these limitations and allows for complete measurements of the total chirality and discrimination of the effects of its real and imaginary part, possible also in an absolute manner via the application of a crucial signal reversal (excitation with reversed polarization) that enables chirality measurements without the need for sample removal. As proof of principle, we demonstrate signal enhancements by a factor of 200 for ultrathin, subwavelength, chiral samples over a uniform and accessible area.

EIA metamaterials based on hybrid metal/dielectric structures with dark-mode-enhanced absorption

Metamaterial analogue of electromagnetically induced absorption (EIA) has promising applications in spectroscopy and sensing. Here we propose an EIA metamaterial based on hybrid metal/dielectric structures, which are composed of a metallic wire and a dielectric block, and investigate the EIA-like effect by simulations, experiments, and the two-oscillator model. An EIA-like effect emerges in virtue of the near-field coupling between metallic wire and dielectric block, and the dielectric block exhibiting magnetic dipolar resonance makes a major contribution to the resonance absorption. The magnetic flux through the dielectric block engendered by the near filed of the metallic wire determines the coupling between dielectric block and metallic wire. With the variation of the separation between dielectric block and metallic wire, the EIA-like effect is preserved and does not convert into the EIT-like effect although the coupling and consequently the absorbance are altered. Based on the two-oscillator model, the absorption spectrum of the EIA metamaterial is quantitatively analyzed and the parameters of the oscillator system are retrieved.

Ultra-narrowband polarization insensitive transmission filter using a coupled dielectric-metal metasurface

A coupled dielectric-metal metasurface (CDMM) filter consisting of amorphous silicon (a-Si) rings and subwavelength holes in Au layer separated by a SiO₂ layer is presented. The design parameters of the CDMM filter is numerically optimized to have a polarization independent peak transmittance of 0.55 at 1540 nm with a Full Width at Half Maximum (FWHM) of 10 nm. The filter also has a 100 nm quiet zone with ∼10^-2 transmittance. A radiating two-oscillator model reveals the fundamental resonances in the filter which interfere to produce the electromagnetically induced transparency (EIT) like effect. Multipole expansion of the currents in the structure validates the fundamental resonances predicted by the two-oscillator model. The presented CDMM filter is robust to artifacts in device fabrication and has performances comparable to a conventional Fabry-Pérot filter. However, it is easier to be integrated in image sensors as the transmittance peak can be tuned by only changing the periodicity resulting in a planar structure with a fixed height.

Wideband and Large Angle Electromagnetically Induced Transparency by the Equivalent Transmission Line in a Metasurface

A classical structure for a U-shaped metasurface exhibiting a wideband and large angle electromagnetically induced transparency (EIT) effect in the terahertz range is proposed. One horizontal and two vertical strips, which represent the bright and dark modes, respectively, are created for the U-shaped structure. The finite integration time domain (FITD) and equivalent circuit method are compared with the EIT result. The EIT effect is affected by the length of the vertical bar and by the distance from the vertical bar to the symmetry axis. The results show that the asymmetry of the main structure in the x and y axes makes it easier to achieve the EIT effect. In addition, by changing the incident angle, the EIT effect always exists until the angle of the incidental electromagnetic wave is 85 degrees. These results have many potential applications for terahertz filtering, large-angle switching and sensors.

Giant and highly reflective Goos-Hänchen shift in a metal-dielectric multilayer Fano structure

We experimentally demonstrated a giant Goos-Hänchen (GH) shift in a metal-dielectric multilayer Fano structure. The observed GH shift was 0.176 mm, which corresponded to (GH shift/λ) = 493, where λ is the incident wavelength. A unique feature of this giant GH shift was that it occurred without attenuation, i.e., reflectivity ∼1, due to Fano interference between surface plasmon polariton and high-Q dielectric waveguide mode. The Q-value is determined by the coupling loss. Therefore, we can enhance the GH shift to an arbitrarily large value by controlling the coupling strength. The unique feature whereby the giant GH shift occurs without attenuation has great potential for real-world applications, such as optical switching, optical filters, and sensors, where the reduction of reflected beam intensity is currently a major drawback.

Phase-Modulated Scattering Manipulation for Exterior Cloaking in Metal-Dielectric Hybrid Metamaterials

Artificially structured metamaterials with metallic or dielectric inclusions are extensively studied for exotic light manipulations via controlling the local-resonant modes in the microstructures. The coupling between these resonant modes has drawn growing interest in recent years due to the advanced functional metamaterial making the microstructures more and more complex. Here, the suppression of magnetic resonance of a dielectric cuboid, an analogue to the scattering cancellation effect or radiation control system, realized with an exterior cloaking in a hybrid metamaterial system, is demonstrated. Furthermore, the significant modulation of the absorption of the dielectric resonator in the hybrid metamaterial is also demonstrated. The physical insight of the experimental results is well illuminated with a classical double-harmonic-oscillator model, from which it is revealed that the complex coupling, i.e., the phase of coupling coefficient, plays a crucial role in the overall response of the metal-dielectric hybrid system. The proposed design strategy is anticipated to form a more straightforward and efficient paradigm for practical applications based on radiation control via versatile mode couplings.

Microcavity-Mediated Spectrally Tunable Amplification of Absorption in Plasmonic Nanoantennas

Nanoantenna-microcavity hybrid systems offer unique platforms for the study and manipulation of light at the nanoscale, since their constituents have either low mode volume or long photon storage time. A nearby dielectric optical cavity can modify the photonic environment surrounding a plasmonic nanoantenna, presenting opportunities to sculpt its spectral response. However, matching the polar opposites for enhanced light-matter interactions remains challenging, as the antenna can be rendered transparent by the cavity through destructive Fano interferences. In this work, we tackle this issue by offering a new plasmonic-photonic interaction framework. By coupling to a photonic crystal guided resonance, a gold nanostar delivers 1 order of magnitude amplified absorption, and the ultrasharp Lorentzian-line-shaped hybrid resonance is continuously tunable over a broad spectral range by scanning of the incidence angle. Our intuitive coupled mode model reveals that a distinct optical pathway highlighting the cavity-mediated activation of nanoantennas is key for absorption enhancement. Moreover, we show that the line width of the enhancement can be widely tunable, and that the maximum power transferred to the antennas is attained under critical coupling. The cooperative hybrid system opens up new opportunities to boost a wealth of applications including ultrasensitive molecular spectroscopy, plasmonic hot carrier chemistry, thermoplasmonic, spontaneous emission enhancement, nanolasers, and many more.

Probabilistic Representation and Inverse Design of Metamaterials Based on a Deep Generative Model with Semi-Supervised Learning Strategy

The research of metamaterials has achieved enormous success in the manipulation of light in a prescribed manner using delicately designed subwavelength structures, so-called meta-atoms. Even though modern numerical methods allow for the accurate calculation of the optical response of complex structures, the inverse design of metamaterials, which aims to retrieve the optimal structure according to given requirements, is still a challenging task owing to the nonintuitive and nonunique relationship between physical structures and optical responses. To better unveil this implicit relationship and thus facilitate metamaterial designs, it is proposed to represent metamaterials and model the inverse design problem in a probabilistically generative manner, enabling to elegantly investigate the complex structure-performance relationship in an interpretable way, and solve the one-to-many mapping issue that is intractable in a deterministic model. Moreover, to alleviate the burden of numerical calculations when collecting data, a semisupervised learning strategy is developed that allows the model to utilize unlabeled data in addition to labeled data in an end-to-end training. On a data-driven basis, the proposed deep generative model can serve as a comprehensive and efficient tool that accelerates the design, characterization, and even new discovery in the research domain of metamaterials, and photonics in general.

Bandwidth bounds of coherent perfect absorber in resonant metasurfaces

Coherent perfect absorber (CPA), a resonator with critical losses that can perfectly absorb all incident light, has been observed at various frequency regimes (from microwave to visible light). Besides the functional frequency, the bandwidth is also an important parameter in characterizing the performance of CPA. Here, we explore the bandwidth of CPA in a kind of weakly-coupled-resonance metasurfaces with 4κ²-γs2<0, where κ is the near-field coupling between the radiative and non-radiative resonant modes, and γ_sis the scattering loss rate of the radiative resonant mode. Based on the coupled mode theory, we analytically derive the upper and lower bounds of the bandwidth, and show that they are determined by the dissipation loss rates of the composed modes. To narrow the bandwidth, it is better to increase the radiative loss rate when designing a weakly coupled resonator. We also show that CPA is associated with a robust phase singularity with a winding number of ± 1. The conclusions are numerically verified in a designed resonant metasurface and could perform as a guideline for designing CPA in various resonant systems.

On-chip plasmon-induced transparency in THz metamaterial on a LiNbO3 subwavelength planar waveguide

We experimentally demonstrate on-chip plasmon-induced transparency at THz frequencies using a meta-structure deposited on a 50 μm-thick dielectric subwavelength waveguide. The obvious plasmon-induced transparency results from strong coupling between the respective modes of a cut wire and a double-gap split ring resonator. The simulation and experimental results are consistent. Based on our numerical simulations of the temporal evolution of plasmon-induced transparency, a π/2 phase difference at the transparency peak between the above two modes is observed, i.e., there is energy oscillating between them that exhibits Rabi oscillation-like behavior. In addition, at the transparency peak, a strong local-field enhancement effect and high transmission can be obtained simultaneously, which can be tuned by changing the separation between the cut wire and the double-gap split ring resonator. These results will facilitate the design of THz integrated photonic devices and serve as an excellent platform for nonlinear optics and sensing.

Au Nanobottles with Synthetically Tunable Overall and Opening Sizes for Chemo-Photothermal Combined Therapy

Highly asymmetric Au nanostructures, such as split Au nanorings and Au nanocups, exhibit attractive plasmonic properties because of their asymmetric geometries. To facilitate their plasmonic applications, effective and facile synthetic methods for producing asymmetric Au nanostructures with controllable sizes and uniform shapes are highly desirable. Herein, we report on an approach for the synthesis of largely asymmetric colloidal Au nanobottles with synthetically tunable overall and opening sizes. Au nanobottles with overall sizes in the range of ∼100-230 nm are obtained through sacrificial templating with differently sized PbS nano-octahedra. The opening sizes of the produced Au nanobottles can be tailored from ∼10 to ∼120 nm by either adjusting the Au/PbS molar ratio in the growth process or controlling the oxidation degree. The achieved size tunability allows the plasmon resonance wavelength of Au nanobottles to be varied in the range of ∼600-900 nm. Our uniform Au nanobottles, which possess controllable sizes, large cavity volumes, and tunable plasmon resonance wavelengths in the visible to near-infrared range, have been further applied for anticancer drug delivery and photothermal therapy. The effects of surface coating and the opening size of Au nanobottles on the drug encapsulation efficiency (EE) and initial burst drug release are systemically evaluated. A high doxorubicin EE and low initial burst drug release are realized with the dense silica-coated Au nanobottles having an opening size of 44 nm. In addition, chemo-photothermal combined therapy has been demonstrated with the doxorubicin-loaded Au nanobottles. Our results will be helpful for the design of Au nanobottles with different sizes and plasmonic properties as well as provide ample opportunities for exploring various plasmon-enabled applications of Au nanobottles.

Active multifunctional terahertz modulator based on plasmonic metasurface

An active multifunctional terahertz modulator based on plasmon-induced transparency (PIT) metasurface under the effect of external infrared light was investigated theoretically and experimentally. A distinct transparency window, which resulted from the near-field coupling between two resonators, could be observed in the transmission spectra. Experimental results showed a phenomenon infrared light induced blue shift on the both resonator with increasing optical powers. When the optical power was tuned from 0 mW to 400 mW, the amplitude tunability of transmission at transparency window reached to 34.01%, much larger than that at the two resonance frequencies. Moreover, the phase tunability of the transmission at 0.98 THz reached to 31.35%. Meanwhile, the amplitude variation was limited to 10%. Furthermore, a coupled Lorentz oscillator model was adopted to analyze the near-field interaction of the resonances. Experimental results were in good agreement with the analytical fitting results.

Tunable quad-band transmission response, based on single-layer metamaterials

We investigated the electromagnetically induced transparency (EIT)-like effects in planar metamaterials (MMs) at microwave (GHz) frequencies. The specific MMs that were used in this study consist of cut-wire resonator/ring resonator, which achieved the dual EIT-like effects in a single-layer through the bright- and quasi-dark-mode coupling and the lattice mode coupling. In addition, by varying the distance between the two resonators, the quad-band EIT spectral response in the microwave region was obtained, and the group refractive index at the EIT-like resonance of proposed design reached up to 4,000. This study provides the design approach to the multispectral EIT-like effects and might suggest potential applications in a variety of fields, for example, low-loss slow-light device, multiple switching sensor, and other sensing devices.

Electromagnetically Induced Transparency (EIT) Like Transmission Based on 3 × 3 Cascaded Multimode Interference Resonators

We propose a method for generating the electromagnetically induced transparency (EIT) like-transmission by using microring resonator based on cascaded 3 × 3 multimode interference (MMI) structures. Based on the Fano resonance unit created from a 3 × 3 MMI coupler with a feedback waveguide, two schemes of two coupled Fano resonator unit (FRU) are investigated to generate the EIT like transmission. The theoretical and numerical analysis based on the coupled mode theory and transfer matrix is used for the designs. Our proposed structure has advantages of compactness and ease of fabrication. We use silicon waveguide for the design of the whole device so it is compatible with the existing Complementary Metal-Oxide-Semiconductor (CMOS) circuitry foundry. The fabrication tolerance and design parameters are also investigated in this study.

Chirality-dependent electromagnetically induced transparency based on a double semi-periodic helix metastructure

A chiral metastructure composed of spatially separated double semi-periodic helices is proposed and investigated theoretically and experimentally in this Letter. Chirality-dependent electromagnetically induced transparency (EIT) and a slow light effect in the microwave region are observed from a numerical parameter study, while experimental results from the 3D printing sample yield good agreement with the theoretical findings. The studied EIT phenomenon arises as a result of destructive interference by coupled resonances, and the proposed chiral metastructure can be applied in areas such as polarization communication, pump-probe characterization, and quantum computing areas.

Chiral Plasmonic Fields Probe Structural Order of Biointerfaces

The structural order of biopolymers, such as proteins, at interfaces defines the physical and chemical interactions of biological systems with their surroundings and is hence a critical parameter in a range of biological problems. Known spectroscopic methods for routine rapid monitoring of structural order in biolayers are generally only applied to model single-component systems that possess a spectral fingerprint which is highly sensitive to orientation. This spectroscopic behavior is not a generic property and may require the addition of a label. Importantly, such techniques cannot readily be applied to real multicomponent biolayers, have ill-defined or unknown compositions, and have complex spectroscopic signatures with many overlapping bands. Here, we demonstrate the sensitivity of plasmonic fields with enhanced chirality, a property referred to as superchirality, to global orientational order within both simple model and “real” complex protein layers. The sensitivity to structural order is derived from the capability of superchiral fields to detect the anisotropic nature of electric dipole–magnetic dipole response of the layer; this is validated by numerical simulations. As a model study, the evolution of orientational order with increasing surface density in layers of the antibody immunoglobulin G was monitored. As an exemplar of greater complexity, superchiral fields are demonstrated, without knowledge of exact composition, to be able to monitor how qualitative changes in composition alter the structural order of protein layers formed from blood serum, thereby establishing the efficacy of the phenomenon as a tool for studying complex biological interfaces.

High-Performance Ultrathin Active Chiral Metamaterials

Ultrathin active chiral metamaterials with dynamically tunable and responsive optical chirality enable new optical sensors, modulators, and switches. Herein, we develop ultrathin active chiral metamaterials of highly tunable chiroptical responses by inducing tunable near-field coupling in the metamaterials and exploit the metamaterials as ultrasensitive sensors to detect trace amounts of solvent impurities. To demonstrate the active chiral metamaterials mediated by tunable near-field coupling, we design moiré chiral metamaterials (MCMs) as model metamaterials, which consist of two layers of identical Au nanohole arrays stacked upon one another in moiré patterns with a dielectric spacer layer between the Au layers. Our simulations, analytical fittings, and experiments reveal that spacer-dependent near-field coupling exists in the MCMs, which significantly enhances the spectral shift and line shape change of the circular dichroism (CD) spectra of the MCMs. Furthermore, we use a silk fibroin thin film as the spacer layer in the MCM. With the solvent-controllable swelling of the silk fibroin thin films, we demonstrate actively tunable near-field coupling and chiroptical responses of the silk-MCMs. Impressively, we have achieved the spectral shift over a wavelength range that is more than one full width at half-maximum and the sign inversion of the CD spectra in a single ultrathin (1/5 of wavelength in thickness) MCM. Finally, we apply the silk-MCMs as ultrasensitive sensors to detect trace amounts of solvent impurities down to 200 ppm, corresponding to an ultrahigh sensitivity of >10⁵ nm/refractive index unit (RIU) and a figure of merit of 10⁵/RIU.

Active control of an edge-mode-based plasmon-induced absorption sensor

We investigate the formation and evolution of plasmon-induced absorption (PIA) effect in a three-dimensional graphene waveguide structure. The PIA window is formed by near-field coupling of the graphene edge mode, the extremely destructive interference between the radiative mode and sub-radiative mode of graphene nanoribbons. The resonance intensity has a significant dependence on the coupling distance between the graphene nanoribbons. At the same time, it is particularly sensitive to the refractive index of the environment, which is promising for sensing devices. In addition, the resonant wavelength can be actively controlled by changing the Fermi energy of graphene. Moreover, it can be seen that the group time delay of the PIA window reaches -0.28  ps, which is a good candidate for ultrafast light application. Finally, additional graphene nanoribbons can also form a double-channel PIA window. Our work may provide an excellent platform for controlling the optical transmission of highly integrated plasmonic components.

Characteristics of multiple Fano resonances in waveguide-coupled surface plasmon resonance sensors based on waveguide theory

We observe and analyze multiple Fano resonances and the plasmon-induced transparency (PIT) arising from waveguidecoupled surface plasmon resonance in a metal-dielectric Kretschmann configuration. It is shown that the simulation results for designed structures agree well with those of the dispersion relation of waveguide theory. We demonstrate that the coupling between the surface plasmon polariton mode and multi-order planar waveguide modes leads to multiple Fano resonances and PIT. The obtained results show that the number of Fano resonances and the linewidth of resonances depend on two structural parameters, the Parylene C and SiO2 layers, respectively. For the sensing action of Fano resonance, the figure of merit for the sensitivity by intensity is estimated to be 44 times higher than that of conventional surface plasmon resonance sensors. Our research reveals the potential advantage of sensors with high sensitivity based on coupling between the SPP mode and multi-order PWG modes.

Metamaterial engineered transparency due to the nullifying of multipole moments

Here we propose, to the best of our knowledge, a novel transparency effect in cylindrical all-dielectric metamaterials. We show that the cancellation of multipole moments of the same kind leads to almost zero radiation losses in all-dielectric metamaterials due to the counter-directed multipolar moments in metamolecule. The nullifying of multipoles, mainly dipoles, and suppression of higher multipoles, results in the ideal transmission of an incident wave through the designed metamaterial. The observed effect could pave the road to the new generation of light-manipulating transparent metadevices such as filters, waveguides, and cloaks.

Superchiral Plasmonic Phase Sensitivity for Fingerprinting of Protein Interface Structure

The structure adopted by biomaterials, such as proteins, at interfaces is a crucial parameter in a range of important biological problems. It is a critical property in defining the functionality of cell/bacterial membranes and biofilms (i.e., in antibiotic-resistant infections) and the exploitation of immobilized enzymes in biocatalysis. The intrinsically small quantities of materials at interfaces precludes the application of conventional spectroscopic phenomena routinely used for (bio)structural analysis due to a lack of sensitivity. We show that the interaction of proteins with superchiral fields induces asymmetric changes in retardation phase effects of excited bright and dark modes of a chiral plasmonic nanostructure. Phase retardations are obtained by a simple procedure, which involves fitting the line shape of resonances in the reflectance spectra. These interference effects provide fingerprints that are an incisive probe of the structure of interfacial biomolecules. Using these fingerprints, layers composed of structurally related proteins with differing geometries can be discriminated. Thus, we demonstrate a powerful tool for the bioanalytical toolbox.

Tailored plasmon-induced transparency in attenuated total reflection response in a metal-insulator-metal structure

We demonstrated tailored plasmon-induced transparency (PIT) in a metal (Au)–insulator (SiO₂)–metal (Ag) (MIM) structure, where the Fano interference between the MIM waveguide mode and the surface plasmon polariton (SPP) resonance mode induced a transparency window in an otherwise opaque wavenumber (k) region. A series of structures with different thicknesses of the Ag layer were prepared and the attenuated total reflection (ATR) response was examined. The height and width of the transparency window, as well as the relevant k-domain dispersion, were controlled by adjusting the Ag layer thickness. To confirm the dependency of PIT on Ag layer thickness, we performed numerical calculations to determine the electric field amplitude inside the layers. The steep k-domain dispersion in the transparency window is capable of creating a lateral beam shift known as the Goos–Hänchen shift, for optical device and sensor applications. We also discuss the Fano interference profiles in a ω − k two-dimensional domain on the basis of Akaike information criteria.

Peak modulation in multicavity-coupled graphene-based waveguide system

Plasmonically induced transparency (PIT) in a multicavity-coupled graphene-based waveguide system is investigated theoretically and numerically. By using the finite element method (FEM), the multiple mode effect can be achieved, and blue shift is exhibited by tunable altering the chemical potential of the monolayer graphene. We find that the increasing number of the graphene rectangle cavity (GRC) achieves the multiple PIT peaks. In addition, we find that the PIT peaks reduce to just one when the distance between the third cavity and the second one is 100 nm. Easily to be experimentally fabricated, this graphene-based waveguide system has many potential applications for the advancement of 3D ultra-compact, high-performance, and dynamical modulation plasmonic devices.

Dynamically tunable plasmon induced absorption in graphene-assisted metallodielectric grating

The dynamically tunable plasmon induced absorption (PIA) effect is demonstrated in a graphene-assisted metallodielectric grating structure. Two methods are employed to achieve the tunable PIA effect in the mid-infrared region: one is based on controlling the chemical potential of graphene by adjusting the gate voltage, the other is related to varying the refractive index of interlayer. Our calculated results reveal that high tunability in amplitude and bandwidth of the PIA effect can be achieved by using the above-mentioned methods. Compared with previous results, our scheme is much easier to fabricate and has significant applications in modulators, absorbers and sensors.

Polarization-independent, wide-incident-angle and dual-band perfect absorption, based on near-field coupling in a symmetric metamaterial

We numerically and experimentally investigated a dual-band metamaterial perfect absorber (MPA), utilizing the near-field coupling of double split-ring resonators (DSRRs). Owing to the near-field coupling between resonators, two arms in each DSRR resonate in different phases, leading to a dual-band perfect absorption. The proposed MPA also exhibits polarization-insensitive behavior and maintains the high absorption above 90% up to a wide range of incident angle more than 45°. Finally, to further consolidate our approach, a multi-band absorption is also studied by exploiting the near-field coupling among a larger number of DSRRs. Our work is expected to be applied to future broadband devices using MPA.

High extinction ratio electromagnetically induced transparency analogue based on the radiation suppression of dark modes

A high extinction ratio (ER) electromagnetically induced transparency (EIT) analogue based on single-layer metamaterial is designed and experimentally demonstrated in this paper. This design involves four mirror-like symmetrically coupled split ring resonators (SRRs) that exhibit a bright-dark-dark-bright mode configuration. The EIT-like effect is realized by coupling between the bright resonators and dark resonators. The high ER feature is achieved from the suppression of radiative losses, due to opposite directions of electric and magnetic dipoles of two dark modes in the unit cell. Classical coupled resonator model is used to theoretically analyze the device transmission performances and to characterize parameter influence of the ER. Both numerical simulation and experiment results demonstrate that the ER of this device can reach more than 21 dB, which is 11 dB higher than that of conventional bright-dark coupling SRR arrangement. Finally, the potential multi-channel sensing utility of this device is demonstrated to show the importance of high ER feature.

Novel oscillator model with damping factor for plasmon induced transparency in waveguide systems

We introduce a novel two-oscillator model with damping factor to describe the plasmon induced transparency (PIT) in a bright-dark model plasmonic waveguide system. The damping factor γ in the model can be calculated from metal conductor damping factor γ_c and dielectric damping factor γ_d. We investigate the influence of geometry parameters and damping factor γ on transmission spectra as well as slow-light effects in the plasmonic waveguide system. We can find an obvious PIT phenomenon and realize a considerable slow-light effect in the double-cavities system. This work may provide guidance for optical switching and plasmon-based information processing.

Multipole Modes Excitation of uncoupled dark Plasmons Resonators based on Frequency Selective Surface at X-band Frequency Regime

In this report, we theoretically and experimentally demonstrates that multipole modes could be excited effectively in dark plasmonic resonators without introducing any other bright resonators at microwave range based on a two-dimensional frequency selective surface (FSS) structure. These excited multipole resonances are closely related to the coupling strength between adjacent S-LSPs resonators (the periodicity of the FSS). The modes splitting effects and resonance frequencies of the excited multipole modes are regulated by changing the numbers of grooves and inner disk radius, both of which play significant roles in the excitation of the dark S-LSPs disk resonator at normal incidence. Moreover, the multipole resonances characteristics of dark S-LSPs resonators in the case of oblique incidence are also presented. Observation of such multipole resonances in dark S-LSPs without introducing extra bright resonance at normal/oblique incidence would find more potential applications in microwave and terahertz based sensors, plasmonic resonance devices and metamaterial devices.

Tunable Multiple Plasmon-Induced Transparencies Based on Asymmetrical Grapheme Nanoribbon Structures

We present plasmonic devices, consisting of periodic arrays of graphene nanoribbons (GNRs) and a graphene sheet waveguide, to achieve controllable plasmon-induced transparency (PIT) by numerical simulation. We analyze the bright and dark elements of the GNRs and graphene-sheet waveguide structure. Results show that applying the gate voltage can electrically tune the PIT spectrum. Adjusting the coupling distance and widths of GNRs directly results in a shift of transmission dips. In addition, increased angle of incidence causes the transmission to split into multiple PIT peaks. We also demonstrate that PIT devices based on graphene plasmonics may have promising applications as plasmonic sensors in nanophotonics.