Ultrafast Photoinduced Electric-Polarization Switching in a Hydrogen-Bonded Ferroelectric Crystal

Light-driven dynamical tuning of the thermal conductivity in ferroelectrics

Dynamical tuning of the thermal conductivity in crystals, κ, is critical for thermal management applications, as well as for energy harvesting and the development of novel phononic devices able to perform logic operations with phonons. Such a desired κ control can be achieved in functional materials that experience large structural and phonon variations as a result of field-induced phase transformations. However, this approach is only practical within reduced temperature intervals containing zero-bias phase transition points, since otherwise the necessary driving fields become excessively large and the materials' performances are detrimentally affected. Here, based on first-principles calculations, we propose an alternative strategy for dynamically tuning κ that is operative over broad temperature conditions and realizable in a wide class of materials. By shining light on the archetypal perovskite oxide KNbO3, we predict that ultrafast and reversible ferroelectric-to-paraelectric phase transitions are induced, yielding large and anisotropic κ variations (up to ≈30% at T = 300 K). These light-induced thermal transport shifts can take place at temperatures spanning several hundreds of kelvin and are essentially the result of anharmonic effects affecting the phonon lifetimes.

Molecular Design of a Metal-Nitrosyl Ferroelectric with Reversible Photoisomerization

The development of photo-responsive ferroelectrics whose polarization may be remotely controlled by optical means is of fundamental importance for basic research and technological applications. Herein, we report the design and synthesis of a new metal-nitrosyl ferroelectric crystal (DMA)(PIP)[Fe(CN)₅(NO)] (1) (DMA = dimethylammonium, PIP = piperidinium) with potential phototunable polarization via a dual-organic-cation molecular design strategy. Compared to the parent non-ferroelectric (MA)₂[Fe(CN)₅(NO)] (MA = methylammonium) material with a phase transition at 207 K, the introduction of larger dual organic cations both lowers the crystal symmetry affording robust ferroelectricity and increases the energy barrier of molecular motions, endowing 1 with a large polarization of up to 7.6 μC cm^-2 and a high Curie temperature (T_c) of 316 K. Infrared spectroscopy shows that the reversible photoisomerization of the nitrosyl ligand is accomplished by light irradiation. Specifically, the ground state with the N-bound nitrosyl ligand conformation can be reversibly switched to both the metastable state I (MSI) with isonitrosyl conformation and the metastable state II (MSII) with side-on nitrosyl conformation. Quantum chemistry calculations suggest that the photoisomerization significantly changes the dipole moment of the [Fe(CN)₅(NO)]^2- anion, thus leading to three ferroelectric states with different values of macroscopic polarization. Such optical accessibility and controllability of different ferroelectric states via photoinduced nitrosyl linkage isomerization open up a new and attractive route to optically controllable macroscopic polarization.

Ferroelectric Phase Transition Driven by Switchable Covalent Bonds

The mechanism on ferroelectric phase transitions is mainly attributed to the displacive and/or order-disorder transition of internal components since the discovery of the ferroelectricity in 1920, rather than the breaking and recombination of chemical bonds. Here, we demonstrate how to utilize the chemical bond rearrangement in a diarylethene-based crystal to realize the light-driven mm2F1-type ferroelectric phase transition. Such a photoinduced phase transition is entirely driven by switchable covalent bonds with breaking and reformation, enabling the reversible light-controllable ferroelectric polarization switching, dielectric and nonlinear optical bistability. Moreover, light as quantized energy can achieve contactless, nondestructive, and remote-control operations. This work proposes a new mechanism of ferroelectric phase transition, and highlights the significance of photochromic molecules in designing new ferroelectrics for photocontrol data storage and sensing.

Electronic Origin of Laser-Induced Ferroelectricity in SrTiO3

Although ultrafast control of the nonthermally driven ferroelectric transition of paraelectric SrTiO₃ was achieved under laser excitation, the underlying mechanism and dynamics of the photoinduced phase transition remain ambiguous. Here, the determinant formation mechanism of ultrafast ferroelectricity in SrTiO₃ is traced by nonadiabatic dynamics simulations. That is, the selective excitation of multiple phonons, induced by photoexcited electrons through the strong correlation between electronic excitation and lattice distortion, results in the breaking of the crystal central symmetry and the onset of ferroelectricity. The accompanying population transition between 3d_z² and 3d_x²-y² orbitals excites multiple phonon branches, including the two high-energy longitudinal optical modes, so as to drive the titanium ion away from the center of the oxygen octahedron and generate a metastable ferroelectric phase. Our findings reveal a cooperative electronic and ionic driving mechanism for the laser-induced ferroelectricity that provides new schemes for the optical control of ultrafast quantum states.

Tracking Ultrafast Structural Dynamics by Time-Domain Raman Spectroscopy

In traditional Raman spectroscopy, narrow-band light is irradiated on a sample, and its inelastic scattering, i.e., Raman scattering, is detected. The energy difference between the Raman scattering and the incident light corresponds to the vibrational energy of the molecule, providing the Raman spectrum that contains rich information about the molecular-level properties of the materials. On the other hand, by using ultrashort optical pulses, it is possible to induce Raman-active coherent nuclear motion of the molecule and to observe the molecular vibration in real time. Moreover, this time-domain Raman measurement can be combined with femtosecond photoexcitation, triggering chemical changes, which enables tracking ultrafast structural dynamics in a form of “time-resolved” time-domain Raman spectroscopy, also known as time-resolved impulsive stimulated Raman spectroscopy. With the advent of stable, ultrashort laser pulse sources, time-resolved impulsive stimulated Raman spectroscopy now realizes high sensitivity and a wide detection frequency window from THz to 3000 cm^–1, and has seen success in unveiling the molecular mechanisms underlying the efficient functions of complex molecular systems. In this Perspective, we overview the present status of time-domain Raman spectroscopy, particularly focusing on its application to the study of femtosecond structural dynamics. We first explain the principle and a brief history of time-domain Raman spectroscopy and then describe the apparatus and recent applications to the femtosecond dynamics of complex molecular systems, including proteins, molecular assemblies, and functional materials. We also discuss future directions for time-domain Raman spectroscopy, which has reached a status allowing a wide range of applications.

Large-Scale Assembly of Peptide-Based Hierarchical Nanostructures and Their Antiferroelectric Properties

An effective strategy is developed to create peptide-based hierarchical nanostructures through the meniscus-driven self-assembly in a large area and fabricate antiferroelectric devices based on these nanostructures for the first time. The diphenylalanine hierarchical nanostructures (FF-HNs) are self-assembled by vertically pulling a substrate from a diphenylalanine (FF) solution dissolved in a miscible solvent under precisely controlled conditions. Owing to the unique structural properties of FF nanostructures, including high crystallinity and α-helix structures, FF-HNs possess a net electrical dipole moment, which can be switched in an external electric field. The mass production of antiferroelectric devices based on FF-HNs can be successfully achieved by means of this biomimetic assembly technique. The devices show an evident antiferroelectric to ferroelectric transition under dark conditions, while the ferroelectricity is found to be tunable by light. Notably, it is discovered that the modulation of antiferroelectric behaviors of FF-HNs under glutaraldehyde exposure is due to the FF molecules that are transformed into cyclophenylalanine by glutaraldehyde. This work provides a stepping stone toward the mass production of self-assembled hierarchical nanostructures based on biomolecules as well as the mass fabrication of electronic devices based on biomolecular nanostructures for practical applications.

Evidence of proton-coupled mixed-valency by electrochemical behavior on transition metal complex dimers bridged by two Ag+ ions

H-Bonded metal complex dimers with reversible redox behaviour, which are connected by a low-barrier hydrogen bond (LBHB) with a very low energy barrier for proton transfer, can provide a unique mixed-valency state stabilized by the proton-coupled electron transfer (PCET) phenomenon. Using cyclic voltammetry measurements, newly prepared [ReIIICl2(PnPr3)2(Hbim)]2 (2) and [OsIIICl2(PnPr3)2(Hbim)]2 (3) existing as H-bonded dimers in a CH2Cl2 solution showed a four-step and four-electron transfer containing two mixed-valency states of ReIIReIII and ReIIIReIV, and OsIIOsIII and OsIIIOsVI, respectively. Furthermore, [ReIIICl2(PnPr3)2(Agbim)]2 (4) and [OsIIICl2(PnPr3)2(Agbim)]2 (5), bridged by two Ag+ ions instead of two H-bonding protons, were prepared, and their electrochemical behaviours changed to a two-step and four-electron transfer. It is clear that the H-bonded complex dimers 2 and 3, connected by an LBHB, can be electrochemically stabilized into unique pairs of mixed-valency states by PCET, and the H-bonding proton transfer also controls the electrochemical redox behaviour.

Ultrafast polarization control by terahertz fields via π-electron wavefunction changes in hydrogen-bonded molecular ferroelectrics

Rapid polarization control by an electric field in ferroelectrics is important to realize high-frequency modulation of light, which has potential applications in optical communications. To achieve this, a key strategy is to use an electronic part of ferroelectric polarization. A hydrogen-bonded molecular ferroelectric, croconic acid, is a good candidate, since π-electron polarization within each molecule is theoretically predicted to play a significant role in the ferroelectric-state formation, as well as the proton displacements. Here, we show that a sub-picosecond polarization modulation is possible in croconic acid using a terahertz pulse. The terahertz-pulse-pump second-harmonic-generation-probe and optical-reflectivity-probe spectroscopy reveal that the amplitude of polarization modulation reaches 10% via the electric-field-induced modifications of π-electron wavefunctions. Moreover, the measurement of electric-field-induced changes in the infrared molecular vibrational spectrum elucidates that the contribution of proton displacements to the polarization modulation is negligibly small. These results demonstrate the electronic nature of polarization in hydrogen-bonded molecular ferroelectrics. The ultrafast polarization control via π-electron systems observed in croconic acid is expected to be possible in many other hydrogen-bonded molecular ferroelectrics and utilized for future high-speed optical-modulation devices.

Mechanism of enhancement of ferroelectricity of croconic acid with temperature

A detailed study of the thermal behaviour of atomic motions in the organic ferroelectric croconic acid is presented in the temperature range 5-300 K. Using high-resolution inelastic neutron scattering and first-principles electronic-structure calculations within the framework of density functional theory and a quasiharmonic phonon description of the material, we find that the frequencies of the well defined doublet in inelastic neutron scattering spectra associated with out-of-plane motions of hydrogen-bonded protons decrease monotonically with temperature indicating weakening of these bonding motifs and enhancement of proton motions. Theoretical mean-square displacements for these proton motions are within 5% of experimental values. A detailed analysis of this observable shows that it is unlikely that there is a facile proton transfer along the direction of ferroelectric polarization in the absence of an applied electric field. Calculations predict constrained thermal motion of proton along crystallographic lattice direction c retaining the hydrogen bond motif of the crystal at high temperature. Using the Berry-phase method, we have also calculated the spontaneous polarization of temperature dependent cell structures, and find that our computational model provides a satisfactory description of the anomalous and so far unexplained rise in bulk electric polarization with temperature. Correlating the thermal motion induced lattice strain with temperature dependent spontaneous polarizations, we conclude that increasing thermal strain with temperatures combined with constrained thermal motion along the hydrogen bond motif are responsible of this increase in ferroelectricity at high temperature.