Transmission Line Circuit and Equation for an Electrolyte-Filled Pore of Finite Length

Effect of Mixed Morphology (Simple Cubic, Face-Centered Cubic, and Body-Centered Cubic)-Based Electrodes on the Electric Double Layer Capacitance of Supercapacitors

Supercapacitors store energy due to the formation of an electric double layer (EDL) at the interface of the electrodes and electrolyte. The present article deals with the finite element study of equilibrium electric double layer capacitance (EDLC) in the mixed morphology electrodes comprising all three fundamental crystal structures, simple cubic (SC), body-centered cubic (BCC), and face-centered cubic morphologies (FCC). Mesoporous-activated carbon forms the electrode in the supercapacitor with (C2H5)4NBF4/propylene carbonate organic electrolyte. Electrochemical interference is clearly demonstrated in the supercapacitors with the formation of the potential bands, as in the case of interference theory due to the increasing packing factor. The effects of electrode thickness varying from a wide range of 50 nm to 0.04 mm on specific EDLC have been discussed in detail. The interfacial geometry of the unit cell in contact with the electrolyte is the most important parameter determining the properties of the EDL. The critical thickness of the electrodes is 1.71 μm in all the morphologies. Polarization increases the interfacial potential and leads to EDL formation. The Stern layer specific capacitance is 167.6 μF cm-2 in all the morphologies. The maximum capacitance is in the decreasing order of interfacial geometry, as FCC > BCC > SC, dependent on the packing factor. The minimum transmittance in all the morphologies is 98.35%, with the constant figure of merit at higher electrode thickness having applications in the chip interconnects. The transient analysis shows that the interfacial current decreases with increasing polarization in the EDL. The capacitance also decreases with the increase of the scan rate.

A network model to predict ionic transport in porous materials

Understanding the dynamics of electric-double-layer (EDL) charging in porous media is essential for advancements in next-generation energy storage devices. Due to the high computational demands of direct numerical simulations and a lack of interfacial boundary conditions for reduced-order models, the current understanding of EDL charging is limited to simple geometries. Here, we present a network model to predict EDL charging in arbitrary networks of long pores in the Debye-Hückel limit without restrictions on EDL thickness and pore radii. We demonstrate that electrolyte transport is described by Kirchhoff's laws in terms of the electrochemical potential of charge (the valence-weighted average of the ion electrochemical potentials) instead of the electric potential. By employing the equivalent circuit representation suggested by these modified Kirchhoff's laws, our methodology accurately captures the spatial and temporal dependencies of charge density and electric potential, matching results obtained from computationally intensive direct numerical simulations. Our network model provides results up to six orders of magnitude faster, enabling the efficient simulation of a triangular lattice of five thousand pores in 6 min. We employ the framework to study the impact of pore connectivity and polydispersity on electrode charging dynamics for pore networks and discuss how these factors affect the time scale, energy density, and power density of capacitive charging. The scalability and versatility of our methodology make it a rational tool for designing 3D-printed electrodes and for interpreting geometric effects on electrode impedance spectroscopy measurements.

Tracking Ion Transport in Nanochannels via Transient Single-Particle Imaging

The transport behavior of ions in the nanopores has an important impact on the performance of the electrochemical devices. Although the classical Transmission-Line (TL) model has long been used to describe ion transport in pores, the boundary conditions for the applicability of the TL model remain controversial. Here, we investigated the transport kinetics of different ions, within nanochannels of different lengths, by using transient single-particle imaging with temporal resolution up to microseconds. We found that the ion transport kinetics within short nanochannels may deviate significantly from the TL model. The reason is that the ion transport under nanoconfinement is composed of multi basic stages, and the kinetics differ much under different stage domination. With the shortening of nanochannels, the electrical double layer (EDL) formation would become the "rate-determining step" and dominate the apparent ion kinetics. Our results imply that using the TL model directly and treating the in-pore mobility as an unchanged parameter to estimate the ion transport kinetics in short nanopores/nanochannels may lead to orders of magnitude bias. These findings may advance the understanding of the nanoconfined ion transport and promote the related applications.

Molecular Understanding of Charging Dynamics in Supercapacitors with Porous Electrodes and Ionic Liquids

Porous electrodes and ionic liquids could significantly enhance the energy storage of supercapacitors. However, they may reduce the charging dynamics and power density due to the nanoconfinement of porous electrodes and the high viscosity of ionic liquids. A comprehensive understanding of the charging mechanism in porous supercapacitors with ionic liquids provides a crucial theoretical foundation for their design optimization. Here, we review the progress of molecular simulations of the charging dynamics in supercapacitors consisting of porous electrodes and ionic liquids. We highlight and delve into the breakthroughs in the ion transport and charging mechanism for electrodes with subnanometer pores and realistic porous structures. We also discuss future directions for the charging dynamics of supercapacitors.

Theory and Simulations of Ionic Liquids in Nanoconfinement

Room-temperature ionic liquids (RTILs) have exciting properties such as nonvolatility, large electrochemical windows, and remarkable variety, drawing much interest in energy storage, gating, electrocatalysis, tunable lubrication, and other applications. Confined RTILs appear in various situations, for instance, in pores of nanostructured electrodes of supercapacitors and batteries, as such electrodes increase the contact area with RTILs and enhance the total capacitance and stored energy, between crossed cylinders in surface force balance experiments, between a tip and a sample in atomic force microscopy, and between sliding surfaces in tribology experiments, where RTILs act as lubricants. The properties and functioning of RTILs in confinement, especially nanoconfinement, result in fascinating structural and dynamic phenomena, including layering, overscreening and crowding, nanoscale capillary freezing, quantized and electrotunable friction, and superionic state. This review offers a comprehensive analysis of the fundamental physical phenomena controlling the properties of such systems and the current state-of-the-art theoretical and simulation approaches developed for their description. We discuss these approaches sequentially by increasing atomistic complexity, paying particular attention to new physical phenomena emerging in nanoscale confinement. This review covers theoretical models, most of which are based on mapping the problems on pertinent statistical mechanics models with exact analytical solutions, allowing systematic analysis and new physical insights to develop more easily. We also describe a classical density functional theory, which offers a reliable and computationally inexpensive tool to account for some microscopic details and correlations that simplified models often fail to consider. Molecular simulations play a vital role in studying confined ionic liquids, enabling deep microscopic insights otherwise unavailable to researchers. We describe the basics of various simulation approaches and discuss their challenges and applicability to specific problems, focusing on RTIL structure in cylindrical and slit confinement and how it relates to friction and capacitive and dynamic properties of confined ions.

Resonant Nanopumps: ac Gate Voltages in Conical Nanopores Induce Directed Electrolyte Flow

Inducing transport in electrolyte-filled nanopores with dc fields has led to influential applications ranging from nanosensors to DNA sequencing. Here we use the Poisson-Nernst-Planck and Navier-Stokes equations to show that unbiased ac fields can induce comparable directional flows in gated conical nanopores. This flow exclusively occurs at intermediate driving frequencies and hinges on the resonance of two competing timescales, representing space charge development at the ends and in the interior of the pore. We summarize the physics of resonant nanopumping in an analytical model that reproduces the results of numerical simulations. Our findings provide a generic route toward real-time controllable flow patterns, which might find applications in controlling the translocation of small molecules or nanocolloids.

Microscopic Simulations of Electrochemical Double-Layer Capacitors

Electrochemical double-layer capacitors (EDLCs) are devices allowing the storage or production of electricity. They function through the adsorption of ions from an electrolyte on high-surface-area electrodes and are characterized by short charging/discharging times and long cycle-life compared to batteries. Microscopic simulations are now widely used to characterize the structural, dynamical, and adsorption properties of these devices, complementing electrochemical experiments and in situ spectroscopic analyses. In this review, we discuss the main families of simulation methods that have been developed and their application to the main family of EDLCs, which include nanoporous carbon electrodes. We focus on the adsorption of organic ions for electricity storage applications as well as aqueous systems in the context of blue energy harvesting and desalination. We finally provide perspectives for further improvement of the predictive power of simulations, in particular for future devices with complex electrode compositions.

Microscopic Model for Cyclic Voltammetry of Porous Electrodes

Cyclic voltammetry (CV) is a widespread experimental technique for characterizing electrochemical devices such as supercapacitors. Despite its wide use, a quantitative relation between CV and microscopic properties of supercapacitors is still lacking. In this Letter, we use both the microscopic "stack-electrode" model and its equivalent circuit for predicting the cyclic voltammetry of electric double-layer formation in porous electrodes. We find that the dimensionless combination ωτ_{n}, with ω the scan frequency of the time-dependent potential and τ_{n} the relaxation timescale of the stack-electrode model, governs the CV curves and capacitance: the capacitance is scan-rate independent for ωτ_{n}≪1 and scan-rate dependent for ωτ_{n}≫1. With a single fit parameter and all other model parameters dictated by experiments, our model reproduces experimental CV curves over a wide range of ω. Meanwhile, the influence of the pore size distribution on the charging dynamics is investigated to explain the experimental data.

Understanding the Electric Double-Layer Structure, Capacitance, and Charging Dynamics

Significant progress has been made in recent years in theoretical modeling of the electric double layer (EDL), a key concept in electrochemistry important for energy storage, electrocatalysis, and multitudes of other technological applications. However, major challenges remain in understanding the microscopic details of the electrochemical interface and charging mechanisms under realistic conditions. This review delves into theoretical methods to describe the equilibrium and dynamic responses of the EDL structure and capacitance for electrochemical systems commonly deployed for capacitive energy storage. Special emphasis is given to recent advances that intend to capture the nonclassical EDL behavior such as oscillatory ion distributions, polarization of nonmetallic electrodes, charge transfer, and various forms of phase transitions in the micropores of electrodes interfacing with an organic electrolyte or ionic liquid. This comprehensive analysis highlights theoretical insights into predictable relationships between materials characteristics and electrochemical performance and offers a perspective on opportunities for further development toward rational design and optimization of electrochemical systems.

Simulating the charging of cylindrical electrolyte-filled pores with the modified Poisson-Nernst-Planck equations

Understanding how electrolyte-filled porous electrodes respond to an applied potential is important to many electrochemical technologies. Here, we consider a model supercapacitor of two blocking cylindrical pores on either side of a cylindrical electrolyte reservoir. A stepwise potential difference $2\Phi$ between the pores drives ionic fluxes in the setup, which we study through the modified Poisson-Nernst-Planck equations, solved with finite elements.We focus our discussion on the dominant timescales with which the pores charge and how these timescales depend on three dimensionless numbers.Next to the dimensionless applied potential $\Phi$, we consider the ratio $R/R_b$ of the pore's resistance $R$ to the bulk reservoir resistance $R_b$ and the ratio $r_{p}/\ld$ of the pore radius $r_p$ to the Debye length $\ld$.We compare our data to theoretical predictions by Aslyamov and Janssen ($\Phi$), Posey and Morozumi ($R/R_b$), and Henrique, Zuk, and Gupta ($r_{p}/\ld$).Through our numerical approach, we delineate the validity of these theories and the assumptions on which they were based.

Relation between Charging Times and Storage Properties of Nanoporous Supercapacitors

An optimal combination of power and energy characteristics is beneficial for the further progress of supercapacitors-based technologies. We develop a nanoscale dynamic electrolyte model, which describes both static capacitance and the time-dependent charging process, including the initial square-root dependency and two subsequent exponential trends. The observed charging time corresponds to one of the relaxation times of the exponential regimes and significantly depends on the pore size. Additionally, we find analytical expressions providing relations of the time scales to the electrode's parameters, applied potential, and the final state of the confined electrolyte. Our numerical results for the charging regimes agree with published computer simulations, and estimations of the charging times coincide with the experimental values.

Charging dynamics of electrical double layers inside a cylindrical pore: predicting the effects of arbitrary pore size

Porous electrodes are found in energy storage devices such as supercapacitors and pseudocapacitors. However, the effect of electrode-pore-size distribution on their energy storage properties remains unclear. Here, we develop a model for the charging of electrical double layers inside a cylindrical pore for arbitrary pore size. We assume small applied potentials and perform a regular perturbation analysis to predict the evolution of electrical potential and ion concentrations in both the radial and axial directions. We validate our perturbation model with direct numerical simulations of the Poisson-Nernst-Planck equations, and obtain quantitative agreement between the two approaches for small and moderate potentials. Our analysis yields two main characteristic features of arbitrary pore size: (i) a monotonic decrease of the charging timescale with an increase in relative pore size (pore size relative to Debye length); (ii) large potential changes for overlapping double layers in a thin transition region, which we approximate mathematically by a jump discontinuity. We quantify the contributions of electromigration and charge diffusion fluxes, which provide mechanistic insights into the dependence of charging timescale and capacitance on pore size. We develop a modified transmission circuit model that captures the effect of arbitrary pore size and demonstrate that a time-dependent transition-region resistor needs to be included in the circuit. We also derive phenomenological expressions for average effective capacitance and charging timescale as a function of pore-size distribution. We show that the capacitance and charging timescale increase with smaller average pore sizes and with smaller polydispersity, resulting in a gain of energy density at a constant power density. Overall, our results advance the mechanistic understanding of electrical-double-layer charging.

Modeling galvanostatic charge-discharge of nanoporous supercapacitors

Molecular modeling has been considered indispensable in studying the energy storage of supercapacitors at the atomistic level. The constant potential method (CPM) allows the electric potential to be kept uniform in the electrode, which is essential for a realistic description of the charge repartition and dynamics process in supercapacitors. However, previous CPM studies have been limited to the potentiostatic mode. Although widely adopted in experiments, the galvanostatic mode has rarely been investigated in CPM simulations because of a lack of effective methods. Here we develop a modeling approach to simulating the galvanostatic charge-discharge process of supercapacitors under constant potential. We show that, for nanoporous electrodes, this modeling approach can capture experimentally consistent dynamics in supercapacitors. It can also delineate, at the molecular scale, the hysteresis in ion adsorption-desorption dynamics during charging and discharging. This approach thus enables the further accurate modeling of the physics and electrochemistry in supercapacitor dynamics.