Anisotropy of the Raman spectra of nanographite ribbons

Renewable Resources as Promising Materials for Obtaining Graphene Oxide-like Structures

Currently, one of the topical directions in the field of production and application of graphene-like nanostructures is the use of renewable natural raw materials, which have unlimited resources for an economically efficient large-scale yield of a product with environmental safety. In this regard, we present the production of graphene oxide (GO) from a renewable natural raw material of plant biomass, birch activated carbon (BAC), and a comparison of the obtained physicochemical, mechanical, and electrical properties of birch activated carbon-graphene oxide (BAC-GO) and graphite-graphene oxide (G-GO) synthesized from the initial materials, BAC and graphite (G). Results obtained from this study confirm the successful oxidation of BAC, which correlates well with the physical-chemical dates of the G-GO and BAC-GO samples. Change in data after the oxidation of graphite and BAC was facilitated by the structure of the starting materials and, presumably, the location and content of functional oxygen-containing groups in the G-GO and BAC-GO chains. Based on the results, the application of a cost-effective, eco-friendly colloidal solution of nanodispersed BAC-GO from a plant biomass-based high-quality resource for producing large-scale nanostructured graphene is validated which has potential applicability in nanoelectronics, medicine, and other fields.

Self-Expansion Based Multi-Patterning for 2D Materials Fabrication beyond the Lithographical Limit

Two-dimensional (2D) materials are promising successors for silicon transistor channels in ultimately scaled devices, necessitating significant research efforts to study their behavior at nanoscopic length scales. Unfortunately, current research has limited itself to direct patterning approaches, which limit the achievable resolution to the diffraction limit and introduce unwanted defects into the 2D material. The potential of multi-patterning to fabricate 2D materials features with unprecedented precision and low complexity at large scale is demonstrated here. By combining lithographic patterning of a mandrel and bottom-up self-expansion, this approach enables pattern resolution one order of magnitude below the lithographical resolution. In-depth characterization of the self-expansion double patterning (SEDP) process reveals the ability to manipulate the critical dimension with nanometer precision through a self-limiting and temperature-controlled oxidation process. These results indicate that the SEDP process can regain the quality and morphology of the 2D material, as shown by high-resolution microscopy and optical spectroscopy. This approach is shown to open up new avenues for research into high-performance, ultra-scaled 2D materials devices for future electronics.

Electron/infrared-phonon coupling in ABC trilayer graphene

Stacking order plays a crucial role in determining the crystal symmetry and has significant impacts on electronic, optical, magnetic, and topological properties. Electron-phonon coupling, which is central to a wide range of intriguing quantum phenomena, is expected to be intricately connected with stacking order. Understanding the stacking order-dependent electron-phonon coupling is essential for understanding peculiar physical phenomena associated with electron-phonon coupling, such as superconductivity and charge density waves. In this study, we investigate the effect of stacking order on electron-infrared phonon coupling in graphene trilayers. By using gate-tunable Raman spectroscopy and excitation frequency-dependent near-field infrared nanoscopy, we show that rhombohedral ABC-stacked trilayer graphene has a significant electron-infrared phonon coupling strength. Our findings provide novel insights into the superconductivity and other fundamental physical properties of rhombohedral ABC-stacked trilayer graphene, and can enable nondestructive and high-throughput imaging of trilayer graphene stacking order using Raman scattering.

Influence of ab initio derived site-dependent hopping parameters on electronic transport in graphene nanoribbons

Graphene Nano Ribbons (GNRs) have been studied extensively due to their potential applications in electrical transport, optical devices, etc. The Tight Binding (TB) model is a common method used to theoretically study the properties of GNRs. However, the hopping parameters of two-dimensional graphene (2DG) are often used as the hopping parameters of the TB model of GNRs, which may lead to inaccuracies in the prediction of GNRs. In this work, we calculated the site-dependent hopping parameters from density functional theory and construction of Wannier orbitals for use in a realistic TB model. It has been found that due to the edge effect, the hopping parameters of edge C atoms are markedly different from the bulk part, which is prominently observed in narrow GNRs. Compared to graphene, the change of hopping parameter of edge C atoms of zigzag GNRs (ZGNRs) and armchair GNRs (AGNRs) is as high as 0.11 and 0.08 eV, respectively. Moreover, we investigated the impact of the calculated site-dependent (SD) hopping parameters on the electronic transport properties of GNRs in the absence and presence of the perpendicular electric field and dilute charged impurities using the Green function approach, Landauer-Büttiker formalism and self-consistent Born approximation. We find an electron-hole asymmetry in the electronic structure and transport properties of ZGNRs with SD hopping parameters. Furthermore, AGNRs with SD hopping energies show a band gap regardless of their width, while AGNRs with 2DG hopping parameters exhibit metallic or semiconductor phases depending on their width. In addition, electric field-induced 4-ZGNR with SD hopping parameters undergoes a metallic to n-doped semiconducting phase transition whereas for 4-ZGNR with 2DG hopping parameters and 8-AGNRs with 2DG or SD hopping parameters, the application of an electric field opens the band gap in both conduction and valence bands simultaneously. Our findings provide evidence for the electron-hole symmetry breaking in ZGNR with SD hopping parameters and make ZGNRs a suitable candidate in valleytronic devices.

Thermal treatment of water-soluble particles formed by compounds composed of carbon nanobelts and C60 molecules

It was previously shown that spherical particles are self-assembled by compounds composed of C60-(6,6)CNB-C60, where CNB stands for "carbon nanobelt", by mixing two individual solutions of C60 and (6,6)CNB molecules dissolved in 1,2-dichlorobenzene at room temperature. The particles are monodisperse in water thanks to their high absolute value of the zeta potential in water. In this report, we investigate the effect of thermal treatment of the particles on some changes in the physical properties and structures. We find that the particles become electrically conductive after thermal treatment at 600 °C for 1 h. We suppose that the change in the electrical characteristics might have been caused by the structural change of (6,6)CNBs into opened-up ribbons composed of fused benzene rings, which construct networks supported by C60 molecules in the particles, judging by the change in the absorption and mass spectra of the particles after thermal treatment and analysis of a possible change in the structure of C60-(6,6)CNB-C60 based on quantum chemical calculations employing the PM6 method, with which it is known that nanostructures such as carbon nanotubes (CNTs) and (6,6)CNBs can be correctly estimated.

Self-Limiting Growth of Monolayer Tungsten Disulfide Nanoribbons on Tungsten Oxide Nanowires

Transition metal dichalcogenides (TMDCs) are promising two-dimensional (2D) materials for next-generation optoelectronic devices; they can also provide opportunities for further advances in physics. Structuring 2D TMDC sheets as nanoribbons has tremendous potential for electronic state modification. However, a bottom-up synthesis of long TMDC nanoribbons with high monolayer selectivity on a large scale has not yet been reported yet. In this study, we successfully synthesized long W_xO_y nanowires and grew monolayer WS₂ nanoribbons on their surface. The supply of source atoms from a vapor-solid bilayer and chemical reaction at the atomic-scale interface promoted a self-limiting growth process. The developed method exhibited a high monolayer selection yield on a large scale and enabled the growth of long (∼100 μm) WS₂ nanoribbons with electronic properties characterized by optical spectroscopy and electrical transport measurements. The produced nanoribbons were isolated from W_xO_y nanowires by mechanical exfoliation and used as channels for field-effect transistors. The findings of this study can be used in future optoelectronic device applications and advanced physics research.

Self-Patterning of Highly Stretchable and Electrically Conductive Liquid Metal Conductors by Direct-Write Super-Hydrophilic Laser-Induced Graphene and Electroless Copper Plating

Stretchable electrodes are desirable in flexible electronics for the transmission and acquisition of electrical signals, but their fabrication process remains challenging. Herein, we report an approach based on patterned liquid metals (LMs) as stretchable electrodes using a super-hydrophilic laser-induced graphene (SHL-LIG) process with electroless plating copper on a polyimide (PI) film. The LMs/SHL-LIG structures are then transferred from the PI film to an Ecoflex substrate as stretchable electrodes with an ultralow sheet resistance of 3.54 mΩ per square and excellent stretchability up to 480% in elongation. Furthermore, these electrodes show outstanding performances of only 8% electrical resistance changes under a tensile strain of 300%, and strong immunity to temperature and pressure changes. As demonstration examples, these electrodes are integrated with a stretchable strain sensing system and a smart magnetic soft robot toward practical applications.

Eco-friendly synthesis of sulphur-doped graphenes with applicability in caffeic acid electrochemical assay

A new electrode based on glassy carbon modified with a sulphur-doped graphene material was successfully developed and applied for caffeic acid (CA) voltammetric detection and quantification. The structural features of sulphur-doped graphene (exfGR-S) characterized by different physicochemical and analytical techniques are presented. Cyclic voltammetry (CV) technique was employed to evaluate the electrochemical behavior of both bare glassy carbon (GCE) and modified GCE/exfGr-S electrodes towards CA oxidation. The study revealed that the modified electrode exhibits superior electrochemical performances compared to the bare electrode, with a broad CA detecting range (from 0.1 to 100.0 µM), a low detection limit 3.03 × 10^-8 M), excellent anti-interference capabilities, as well as good stability and repeatability. The developed electrochemical sensor appears to be a promising candidate for real sample quality control analysis since it successfully displayed its ability to directly detect CA in commercially available coffee product without any pretreatment.

Role Played by Edge-Defects in the Optical Properties of Armchair Graphene Nanoribbons

We explore the implementation of specific optical properties of armchair graphene nanoribbons (AGNRs) through edge-defect manipulation. This technique employs the tight-binding model in conjunction with the calculated absorption spectral function. Modification of the edge states gives rise to the diverse electronic structures with striking changes in the band gap and special flat bands at low energy. The optical-absorption spectra exhibit unique excitation peaks, and they strongly depend on the type and period of the edge extension. Remarkably, there exist the unusual transition channels associated with the flat bands for selected edge-modified systems. We discovered the special rule governing how the edge-defect influences the electronic and optical properties in AGNRs. Our theoretical prediction demonstrates an efficient way to manipulate the optical properties of AGNRs. This might be of importance in the search for suitable materials designed to have possible technology applications in nano-optical, plasmonic and optoelectronic devices.

Multifunctional Laser-Induced Graphene Papers with Combined Defocusing and Grafting Processes for Patternable and Continuously Tunable Wettability from Superlyophilicity to Superlyophobicity

Functional surfaces with tunable and patternable wettability have attracted significant research interests because of remarkable advantages in biomedicine, environmental, and energy storage applications. Based on combined defocusing and grafting strategy for processing laser-induced graphene papers (LIGPs) with variable surface roughness (58.18-6.08 µm) and F content (0-25.9%), their wettability can be tuned continuously from superlyophilicity (contact angle CA ≈ 0^° ) to superlyophobicity (CA > 150^° ), for various liquids with a wide range of surface tensions from 27.5 to 72.8 mN m^-1 . In addition to reaching multiple wetting characteristics including amphiphilic, amphiphobic, and hydrophobic-oleophilic states, three designable processes are further developed for achieving LIGPs with various wetting patterns, including hydrophilic arrays or channels, hydrophobic-to-hydrophilic gradients, and Janus. Activated by the customly designed structures and properties, multifunctional and multi-scenario applications are successfully attempted, including 2D-/3D- directional cell cultivation, water transportation diode, self-triggered liquid transfer & collection, etc.

Multi-orbital tight binding model for the electronic and optical properties of armchair graphene nanoribbons in the presence of a periodic potential

The influences of an external electric field with uniform or modulated potential on the electronic and optical properties of armchair graphene nanoribbons (GNRs) are explored using the multi-orbital tight-binding Hamiltonian. The interplay between an electric field and interaction between (s,p_x,p_y,p_z) orbitals remarkably enriches the main features of band structures and absorption spectra. The applied electric field can notably alter the energy dispersions ofπandσbands, leading to the deformation of band-edge states, open and close of a band gap, and modification of the Fermi energy. The vertical optical excitations happen among theπbands, while their available channels depend on the Fermi level which is controlled by theσ-edge bands and a finite potential. With the rich and unique properties, GNRs are suitable candidates for applications in the fields of photodetectors, nanoelectronics, and spintronics. The calculated results are expected to be examined by the angle-resolved photoemission spectroscopies and optical spectroscopies.

Chemical Vapour Deposition of Graphene-Synthesis, Characterisation, and Applications: A Review

Graphene as the 2D material with extraordinary properties has attracted the interest of research communities to master the synthesis of this remarkable material at a large scale without sacrificing the quality. Although Top-Down and Bottom-Up approaches produce graphene of different quality, chemical vapour deposition (CVD) stands as the most promising technique. This review details the leading CVD methods for graphene growth, including hot-wall, cold-wall and plasma-enhanced CVD. The role of process conditions and growth substrates on the nucleation and growth of graphene film are thoroughly discussed. The essential characterisation techniques in the study of CVD-grown graphene are reported, highlighting the characteristics of a sample which can be extracted from those techniques. This review also offers a brief overview of the applications to which CVD-grown graphene is well-suited, drawing particular attention to its potential in the sectors of energy and electronic devices.

Optical Imaging and Spectroscopy of Atomically Precise Armchair Graphene Nanoribbons

We report the optical imaging and absorption spectroscopy on atomically precise armchair graphene nanoribbons (GNRs) on insulating fused silica substrates. This is achieved by controlling light polarization on macroscopically aligned GNRs which greatly enhances the optical contrast of the submonolayer GNRs on the insulating substrates. We measure the linear absorption spectra of 7-armchair and 9-armchair GNRs in this study, and the experimental data agree qualitatively with ab inito calculation results. The polarization spectroscopy technique enables an unambiguous optical identification of GNRs and provides a rapid tool to characterize the transferred film over a large area.

Study of Ultrasonic Dispersion of Graphene Nanoplatelets

Graphene has outstanding mechanical properties due to its unique structure, and is regarded as an ideal reinforcement of metal matrix composites. However, it is always in an agglomerate form due to its large specific surface area, and thus, it must be first dispersed prior to combining with a matrix, and ultrasonic treatment is considered to be the most effective way. In this work, the effects of parameters of tip ultrasonic treatment, such as ultrasonic time, ultrasonic power, solvent kind, and its temperature, on dispersion and structure of graphene nanoplatelets (GNPs) were studied. The results show that increasing ultrasonic time or ultrasonic power can enhance the dispersion and exfoliation effects of GNPs, but also increase fragmentation degree and disorder degree of C-atom distribution simultaneously. Solvents with low temperature, low viscosity, or high surface tension have similar effects to those of increasing ultrasonic time or power. However, for tap water, a high-surface-tension solvent, it has relatively low fragmentation degree, and good dispersion and exfoliation effects due to the hydrophilicity of GNPs. However, ethyl alcohol is a more suitable solvent because it has excellent volatility and inert reaction characteristics with GNPs and matrix alloys besides a good dispersion effect. The GNPs can achieve the expected status when they are ultrasonically treated for 4 h under a power of 960 W in EA solvent at 35 °C.

Nanomechanics of graphene

The super-high strength of single-layer graphene has attracted great interest. In practice, defects resulting from thermodynamics or introduced by fabrication, naturally or artificially, play a pivotal role in the mechanical behaviors of graphene. More importantly, high strength is just one aspect of the magnificent mechanical properties of graphene: its atomic-thin geometry not only leads to ultra-low bending rigidity, but also brings in many other unique properties of graphene in terms of mechanics in contrast to other carbon allotropes, including fullerenes and carbon nanotubes. The out-of-plane deformation is of a 'soft' nature, which gives rise to rich morphology and is crucial for morphology control. In this review article, we aim to summarize current theoretical advances in describing the mechanics of defects in graphene and the theory to capture the out-of-plane deformation. The structure-mechanical property relationship in graphene, in terms of its elasticity, strength, bending and wrinkling, with or without the influence of imperfections, is presented.

Basic Concepts and Recent Advances of Crystallographic Orientation Determination of Graphene by Raman Spectroscopy

Graphene is a kind of typical two-dimensional material consisting of pure carbon element. The unique material shows many interesting properties which are dependent on crystallographic orientations. Therefore, it is critical to determine their crystallographic orientations when their orientation-dependent properties are investigated. Raman spectroscopy has been developed recently to determine crystallographic orientations of two-dimensional materials and has become one of the most powerful tools to characterize graphene nondestructively. This paper summarizes basic aspects of Raman spectroscopy in crystallographic orientation of graphene nanosheets, determination principles, the determination methods, and the latest achievements in the related studies.

Electrochemical Performance of Few-Layer Graphene Nano-Flake Supercapacitors Prepared by the Vacuum Kinetic Spray Method

A few-layer graphene nano-flake thin film was prepared by an affordable vacuum kinetic spray method at room temperature and modest low vacuum conditions. In this economical approach, graphite microparticles, a few layers thick, are deposited on a stainless-steel substrate to form few-layer graphene nano-flakes using a nanoparticle deposition system (NPDS). The NPDS allows for a large area deposition at a low cost and can deposit various metal oxides at room temperature and low vacuum conditions. The morphology and structure of the deposited thin films are alterable by changing the scan speed of the deposition. These changes were verified by field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and Raman spectroscopy. The electrochemical performances of the supercapacitors, fabricated using the deposited films and H3PO4–PVA gel electrolytes with different concentrations, were measured using a 2-electrode cell. The electrochemical performance was evaluated by cyclic voltammetry, galvanostatic Charge–discharge, and electrochemical impedance spectroscopy. The proposed affordable fabricated supercapacitors show a high areal capacitance and a small equivalent series resistance.

Feasible Route for a Large Area Few-Layer MoS₂ with Magnetron Sputtering

In this article, we report continuous and large-area molybdenum disulfide (MoS₂) growth on a SiO₂/Si substrate by radio frequency magnetron sputtering (RFMS) combined with sulfurization. The MoS₂ film was synthesized using a two-step method. In the first step, a thin MoS₂ film was deposited by radio frequency (RF) magnetron sputtering at 400 °C with different sputtering powers. Following, the as-sputtered MoS₂ film was further subjected to the sulfurization process at 600 °C for 60 min. Sputtering combined with sulfurization is a viable route for large-area few-layer MoS₂ by controlling the radio-frequency magnetron sputtering power. A relatively simple growth strategy is demonstrated here that simultaneously enhances thin film quality physically and chemically. Few-layers of MoS₂ are established using Raman spectroscopy, X-ray diffractometer, high-resolution field emission transmission electron microscope, and X-ray photoelectron spectroscopy measurements. Spectroscopic and microscopic results reveal that these MoS₂ layers are of low disorder and well crystallized. Moreover, high quality few-layered MoS₂ on a large-area can be achieved by controlling the radio-frequency magnetron sputtering power.

Vertically Formed Graphene Stripe for 3D Field-Effect Transistor Applications

A 100-nm wide, vertically formed graphene stripe (GS) is demonstrated for three-dimensional (3D) electronic applications. The GS forms along the sidewall of a thin nickel film. It is possible to further scale down the GS width by engineering the deposited thickness of the atomic layer deposition (ALD) Ni film. Unlike a conventional GS or graphene nanoribbon (GNR), the vertically formed GS is made without a graphene transfer and etching process. The process integration of the proposed GS FETs resembles that of currently commercialized vertical NAND flash memory with a design rule of less than 20 nm, implying practical usage of this formed GS for 3D advanced FET applications.

Chemical functionalization and characterization of graphene-based materials

This review offers an overview on the chemical functionalization, characterization and applications of graphene-based materials.

Isotropic Growth of Graphene toward Smoothing Stitching

The quality of graphene grown via chemical vapor deposition still has very great disparity with its theoretical property due to the inevitable formation of grain boundaries. The design of single-crystal substrate with an anisotropic twofold symmetry for the unidirectional alignment of graphene seeds would be a promising way for eliminating the grain boundaries at the wafer scale. However, such a delicate process will be easily terminated by the obstruction of defects or impurities. Here we investigated the isotropic growth behavior of graphene single crystals via melting the growth substrate to obtain an amorphous isotropic surface, which will not offer any specific grain orientation induction or preponderant growth rate toward a certain direction in the graphene growth process. The as-obtained graphene grains are isotropically round with mixed edges that exhibit high activity. The orientation of adjacent grains can be easily self-adjusted to smoothly match each other over a liquid catalyst with facile atom delocalization due to the low rotation steric hindrance of the isotropic grains, thus achieving the smoothing stitching of the adjacent graphene. Therefore, the adverse effects of grain boundaries will be eliminated and the excellent transport performance of graphene will be more guaranteed. What is more, such an isotropic growth mode can be extended to other types of layered nanomaterials such as hexagonal boron nitride and transition metal chalcogenides for obtaining large-size intrinsic film with low defect.

Distinctive electron transport on pyridine-linked molecular junctions with narrow monolayer graphene nanoribbon electrodes compared with metal electrodes and graphene electrodes

The electrodes in the molecular devices are essential for creating functional organic electronic devices.

All-carbon based graphene field effect transistor with graphitic electrodes fabricated by e-beam direct writing on PMMA

A so called all-carbon based graphene field effect transistor (GFET) in which the electrodes are composed of graphite-like nano-sheets instead of metals in the traditional devices is fabricated by one-step e-beam direct writing (EBDW). It is also found that the graphite-like nano-sheets in electrodes are perpendicular to the channel graphene, which is confirmed by the transmission electron microscopy (HRTEM). The one-step fabrication of the carbonaceous electrodes is more convenient and lower-cost comparing to the preparation of traditional metal electrodes and can be applied to many other nano-electronic devices.

Effects of the surface modification of carbon fiber by growing different types of carbon nanomaterials on the mechanical and thermal properties of polypropylene

The potential usage of different types of carbon nanomaterials such as carbon nanofiber (CNF), carbon nanotube (CNT) and graphene (G) flake and also CNF–G and CNT–G on the carbon fiber (CF) surface as fillers in composites, is discussed in this paper.

Catalyst free silica templated porous carbon nanoparticles from bio-waste materials

This work described a simple method to produce the bulk porous carbon nanoparticles from bio-waste materials without any catalyst support.

Dense arrays of highly aligned graphene nanoribbons produced by substrate-controlled metal-assisted etching of graphene

Dense arrays of aligned graphene nanoribbons (GNRs) are fabricated by substrate-controlled etching of large-area single-layer graphene. An adequate choice of etching substrate and catalyst deposition method allows densities up to 25 nanoribbons μm(-1) to be obtained with average widths of 19 nm. The efficacy of the method is evidenced by the high on/off ratios of back-gated transistors made with these GNRs, which can go up to 5000.

Nanographene and graphene edges: electronic structure and nanofabrication

Graphene can be referred to as an infinite polycyclic aromatic hydrocarbon (PAH) consisting of an infinite number of benzene rings fused together. However, at the nanoscale, nanographene's properties lie in between those of bulk graphene and large PAH molecules, and its electronic properties depend on the influence of the edges, which disrupt the infinite π-electron system. The resulting modulation of the electronic states depends on whether the nanographene edge is the armchair or zigzag type, corresponding to the two fundamental crystal axes. In this Account, we report the results of fabricating both types of edges in the nanographene system and characterizing their electronic properties using a scanning probe microscope. We first introduce the theoretical background to understand the two types of finite size effects on the electronic states of nanographene (i) the standing wave state and (ii) the edge state which correspond to the armchair and zigzag edges, respectively. Most importantly, characterizing the standing wave and edge states could play a crucial role in understanding the chemical reactivity, thermodynamic stability and magnetism of nanosized graphene--important knowledge in the design and realization of promising functionalized nanocarbon materials. In the second part, we present scanning probe microscopic characterization of both edge types to experimentally characterize the two electronic states. As predicted, we find the armchair-edged nanographene to have an energetically stable electronic pattern. The zigzag-edged nanographene shows a nonbonding (π radical) pattern, which is the source of the material's electronic and magnetic properties and its chemical activity. Precise control of the edge geometry is a practical requirement to control the electronic structure. We show that we can fabricate the energetically unstable zigzag edges using scanning probe manipulation techniques, and we discuss challenges in using these techniques for that purpose.

High ordered biomineralization induced by carbon nanoparticles in the sea urchin Paracentrotus lividus

A surprising and unexpected biomineralization process was observed during toxicological assessment of carbon nanoparticles on Paracentrotus lividus (sea urchin) pluteus larvae. The larvae activate a process of defense against external material, by incorporating the nanoparticles into microstructures of aragonite similarly to pearl oysters. Aiming at a better understanding of this phenomenon, the larvae were exposed to increasing concentrations of carbon nanoparticles and the biomineralization products were analyzed by electron microscopy, x-ray diffraction and Raman spectroscopy. In order to evaluate the possible influence of Sp-CyP-1 expression on this biomineralization process by larvae, analyses of gene expression (Sp-CyP-1) and calcein labeling were performed. Overall, we report experimental evidence about the capability of carbon nanoparticles to induce an increment of Sp-CyP-1 expression with the consequent activation of a biomineralization process leading to the production of a new pearl-like biomaterial never previously observed in sea urchins.

Raman Spectroscopy in Graphene-Based Systems: Prototypes for Nanoscience and Nanometrology

Raman spectroscopy is a powerful tool to characterize the different types of sp2 carbon nanostructures, including two-dimensional graphene, one-dimensional nanotubes, and the effect of disorder in their structures. This work discusses why sp2 nanocarbons can be considered as prototype materials for the development of nanoscience and nanometrology. The sp2 nanocarbon structures are quickly introduced, followed by a discussion on how this field evolved in the past decades. In sequence, their rather rich Raman spectra composed of many peaks induced by single- and multiple-resonance effects are introduced. The properties of the main Raman peaks are then described, including their dependence on both materials structure and external factors, like temperature, pressure, doping, and environmental effects. Recent applications that are pushing the technique limits, such as multitechnique approach and in situ nanomanipulation, are highlighted, ending with some challenges for new developments in this field.

Dynamic negative compressibility of few-layer graphene, h-BN, and MoS2

We report a novel mechanical response of few-layer graphene, h-BN, and MoS(2) to the simultaneous compression and shear by an atomic force microscope (AFM) tip. The response is characterized by the vertical expansion of these two-dimensional (2D) layered materials upon compression. Such effect is proportional to the applied load, leading to vertical strain values (opposite to the applied force) of up to 150%. The effect is null in the absence of shear, increases with tip velocity, and is anisotropic. It also has similar magnitudes in these solid lubricant materials (few-layer graphene, h-BN, and MoS(2)), but it is absent in single-layer graphene and in few-layer mica and Bi(2)Se(3). We propose a physical mechanism for the effect where the combined compressive and shear stresses from the tip induce dynamical wrinkling on the upper material layers, leading to the observed flake thickening. The new effect (and, therefore, the proposed wrinkling) is reversible in the three materials where it is observed.

Ab initio characterization of graphene nanoribbons and their polymer precursors

Bottom-up fabrication of graphene nanoribbons (GNRs) from halogen-terminated aromatic precursors is a promising method for achieving atomically precise nanoribbons at competitive yields. GNR fabrication proceeds via the polymerization of the precursors and successive dehydrogenation. By first principles density functional theory calculations, we perform a systematic characterization of the polymeric precursors and the corresponding graphene nanoribbons in terms of structural and electronic properties, and we compute the Raman and infrared spectra. The band structure properties are examined by considering the bonding features and the partial charge densities of the structures. The physical origin of the infrared and Raman peaks is investigated in terms of the morphology and vibrational properties of the precursors and products. We show that light spectroscopy provides a unique fingerprint for each type of GNR, which may be used to monitor the quality of the final products and the kinetics of the synthesis process.

Observation of Raman g-peak split for graphene nanoribbons with hydrogen-terminated zigzag edges

Raman scattering of individual hydrogen-terminated zigzag-edged graphene nanoribbons (Z-GNRs) was studied with focus on the G-peak. In addition to the bulk graphene G-peak appearing at ∼1594 cm(-1) (G(+)), an edge-related G-peak at ∼1583 cm(-1) (G(-)) was observed for Z-GNRs. This additional Raman vibrational mode originates from the zigzag edges where localized metallic edge states are present. The relative intensity ratio G(-)/G(+) displays a strong dependence on the ribbon width (W). It increases gradually with decreasing W, and the G(+) finally vanishes at W = 5(±3) nm. Polarized Raman scattering was also employed to confirm the four-fold symmetry of the split TO modes, and the results are in good agreement with previous theoretical predictions. Our work offers the first direct experimental evidence to confirm the validity of predicted Raman scattering of GNRs.

Raman spectroscopy of lithographically patterned graphene nanoribbons

Nanometer-scale graphene objects are attracting much research interest because of newly emerging properties originating from quantum confinement effects. We present Raman spectroscopy studies of graphene nanoribbons (GNRs), which are known to have nonzero electronic bandgap. GNRs of width ranging from 15 to 100 nm have been prepared by e-beam lithographic patterning of mechanically exfoliated graphene followed by oxygen plasma etching. Raman spectra of narrow GNRs can be characterized by an upshifted G band and a prominent disorder-related D band originating from scattering at the ribbon edges. The D-to-G band intensity ratio generally increases with decreasing ribbon width. However, its decrease in width of <25 nm, partly attributed to amorphization at the edges, provides a valuable experimental estimate on D mode relaxation length of <5 nm. The upshift in the G band of the narrowest GNRs can be attributed to confinement effect or chemical doping by functional groups on the GNR edges. Notably, GNRs are much more susceptible to photothermal effects resulting in reversible hole doping caused by atmospheric oxygen than bulk graphene sheets. Finally we show that the 2D band is still a reliable marker in determining the number of layers of GNRs despite its significant broadening for very narrow GNRs.

Graphene edges: a review of their fabrication and characterization

The current status of graphene edge fabrication and characterization is reviewed in detail. We first compare different fabrication methods, including the chemical vapor deposition method, various ways of unzipping carbon nanotubes, and lithographic methods. We then summarize the different edge/ribbon structures that have been produced experimentally or predicted theoretically. We discuss different characterization tools, such as transmission electron microscopy and Raman spectroscopy, that are currently used for evaluating the edge quality as well as the atomic structures. Finally, a detailed discussion of defective and folded edges is also presented. Considering the short history of graphene edge research, the progress has been impressive, and many further advances in this field are anticipated.