Stacking multiple transgenes at a selected genomic site via repeated recombinase-mediated DNA cassette exchanges

Target lines for recombinase-mediated gene stacking in soybean

KEY MESSAGE

Five soybean target lines with recombinase sites at suitable genomic positions were obtained and tested for site-specific gene stacking. For introgression of new transgenic traits to field cultivars, adding new DNA to an existing transgene locus would reduce the number of segregating loci to reassemble back into a breeding line. We described previously an in planta transgene stacking system using the Bxb1 integrase to direct new DNA into a genomic target, but for this system to operate, the target locus must have a preexisting recombination site for Bxb1-mediated integration. Here, we describe 5 soybean target lines from the screening of 118 Agrobacterium-mediated transgenic plants that were positive for gus expression. Each of the 5 target lines has a single copy of the transgenic DNA with precise DNA sequences of the recombinase recognition sites, located at least 1 kb away from the nearest coding region, not close to the centromere, and showed good expression of the reporter gene. We tested Bxb1 integrase-mediated integration of a gfp-containing plasmid into each of these lines and showed precise site-specific integration in bombarded calluses. For plant regeneration, we used embryonic axes of mature soybean seeds to conduct a new set of biolistic transformation with a DsRed-containing plasmid. Three integration events were regenerated into whole plants, demonstrating the principle that target lines can serve as foundation lines for the stacking of DNA to predefined locations in the soybean genome.

Multigene Transformation Through Cre-lox Mediated Site-Specific Integration in Rice

Plant transformation with multiple genes is a major challenge, rendering multi-trait engineering extremely difficult in crop plants. One of the hurdles in multigene transformation is the uncontrolled integration process that leads to low quality transgenic lines that are unsuitable for practical application. Recombinase-mediated site-specific integration has been tested and validated for developing high quality transgenic lines expressing one, two, or multiple genes. Of the numerous recombinase systems tested, Cre-lox and FLP-FRT show high efficiency in plants. Recently, Cre-lox system was successfully used to stack a set of 3 constitutive, 1 heat-induced, and 1 cold-induced gene. A number of transgenic lines were obtained through a relatively small effort, and the resulting transgenic lines all expressed the genes properly as determined by their promoter-specificity. Here, a method of Cre-lox mediated stacking of a multigene construct is described using rice as a model crop.

Targeting Nitrogen Metabolism and Transport Processes to Improve Plant Nitrogen Use Efficiency

In agricultural cropping systems, relatively large amounts of nitrogen (N) are applied for plant growth and development, and to achieve high yields. However, with increasing N application, plant N use efficiency generally decreases, which results in losses of N into the environment and subsequently detrimental consequences for both ecosystems and human health. A strategy for reducing N input and environmental losses while maintaining or increasing plant performance is the development of crops that effectively obtain, distribute, and utilize the available N. Generally, N is acquired from the soil in the inorganic forms of nitrate or ammonium and assimilated in roots or leaves as amino acids. The amino acids may be used within the source organs, but they are also the principal N compounds transported from source to sink in support of metabolism and growth. N uptake, synthesis of amino acids, and their partitioning within sources and toward sinks, as well as N utilization within sinks represent potential bottlenecks in the effective use of N for vegetative and reproductive growth. This review addresses recent discoveries in N metabolism and transport and their relevance for improving N use efficiency under high and low N conditions.

Efficient Gene Stacking in Rice Using the GAANTRY System

Genetic engineering of rice provides a means for improving rice grain quality and yield, and the introduction and expression of multiple genes can produce new traits that would otherwise be difficult to obtain through conventional breeding. GAANTRY (Gene Assembly in Agrobacterium by Nucleic acid Transfer using Recombinase technologY) was previously shown to be a precise and robust system to stably stack ten genes (28 kilobases (kb)) within an Agrobacterium virulence plasmid Transfer-DNA (T-DNA) and obtain high-quality Arabidopsis and potato transgenic events. To determine whether the GAANTRY system can be used to engineer a monocotyledonous crop, two new T-DNA constructs, carrying five (16.9 kb) or eleven (37.4 kb) cargo sequences were assembled and transformed into rice. Characterization of 53 independent transgenic events demonstrated that more than 50% of the plants carried all of the desired cargo sequences and exhibited the introduced traits. Additionally, more than 18% of the lines were high-quality events containing a single copy of the introduced transgenes and were free of sequences from outside of the T-DNA. Therefore, GAANTRY provides a simple, precise and versatile tool for transgene stacking in rice and potentially other cereal grain crops.

Recombinase-mediated integration of a multigene cassette in rice leads to stable expression and inheritance of the stacked locus

Efficient methods for multigene transformation are important for developing novel crop varieties. Methods based on random integrations of multiple genes have been successfully used for metabolic engineering in plants. However, efficiency of co-integration and co-expression of the genes could present a bottleneck. Recombinase-mediated integration into the engineered target sites is arguably a more efficient method of targeted integration that leads to the generation of stable transgenic lines at a high rate. This method has the potential to streamline multigene transformation for metabolic engineering and trait stacking in plants. Therefore, empirical testing of transgene(s) stability from the multigene site-specific integration locus is needed. Here, the recombinase technology based on Cre-lox recombination was evaluated for developing multigenic lines harboring constitutively-expressed and inducible genes. Targeted integration of a five genes cassette in the rice genome generated a precise full-length integration of the cassette at a high rate, and the resulting multigenic lines expressed each gene reliably as defined by their promoter activity. The stable constitutive or inducible expression was faithfully transmitted to the progeny, indicating inheritance-stability of the multigene locus. Co-localization of two distinctly inducible genes by heat or cold with the strongly constitutive genes did not appear to interfere with each other's expression pattern. In summary, high rate of co-integration and co-expression of the multigene cassette installed by the recombinase technology in rice shows that this approach is appropriate for multigene transformation and introduction of co-segregating traits.

SIGNIFICANCE STATEMENT

Recombinase-mediated site-specific integration approach was found to be highly efficacious in multigene transformation of rice showing proper regulation of each gene driven by constitutive or inducible promoter. This approach holds promise for streamlining gene stacking in crops and expressing complex multigenic traits.

Uniform Expression and Relatively Small Position Effects Characterize Sister Transformants in Maize and Soybean

Development of transgenic cell lines or organisms for industrial, agricultural, or medicinal applications involves inserting DNA into the target genome in a way that achieves efficacious transgene expression without a deleterious impact on fitness. The genomic insertion site is widely recognized as an important determinant of success. However, the effect of chromosomal location on transgene expression and fitness has not been systematically investigated in plants. Here we evaluate the importance of transgene insertion site in maize and soybean using both random and site-specific transgene integration. We have compared the relative contribution of genomic location on transgene expression levels with other factors, including cis-regulatory elements, neighboring transgenes, genetic background, and zygosity. As expected, cis-regulatory elements and the presence/absence of nearby transgene neighbors can impact transgene expression. Surprisingly, we determined not only that genomic location had the least impact on transgene expression compared to the other factors that were investigated but that the majority of insertion sites recovered supported transgene expression levels that were statistically not distinguishable. All 68 genomic sites evaluated were capable of supporting high-level transgene expression, which was also consistent across generations. Furthermore, multilocation field evaluation detected no to little decrease in agronomic performance as a result of transgene insertion at the vast majority of sites we evaluated with a single construct in five maize hybrid backgrounds.

High efficiency Agrobacterium-mediated site-specific gene integration in maize utilizing the FLP-FRT recombination system

An efficient Agrobacterium-mediated site-specific integration (SSI) technology using the flipase/flipase recognition target (FLP/FRT) system in elite maize inbred lines is described. The system allows precise integration of a single copy of a donor DNA flanked by heterologous FRT sites into a predefined recombinant target line (RTL) containing the corresponding heterologous FRT sites. A promoter-trap system consisting of a pre-integrated promoter followed by an FRT site enables efficient selection of events. The efficiency of this system is dependent on several factors including Agrobacterium tumefaciens strain, expression of morphogenic genes Babyboom (Bbm) and Wuschel2 (Wus2) and choice of heterologous FRT pairs. Of the Agrobacterium strains tested, strain AGL1 resulted in higher transformation frequency than strain LBA4404 THY- (0.27% vs. 0.05%; per cent of infected embryos producing events). The addition of morphogenic genes increased transformation frequency (2.65% in AGL1; 0.65% in LBA4404 THY-). Following further optimization, including the choice of FRT pairs, a method was developed that achieved 19%-22.5% transformation frequency. Importantly, >50% of T0 transformants contain the desired full-length site-specific insertion. The frequencies reported here establish a new benchmark for generating targeted quality events compatible with commercial product development.

Use of CRISPR/Cas9 for Crop Improvement in Maize and Soybean

CRISPR/Cas enables precise improvement of commercially relevant crop species by transgenic and nontransgenic methodologies. We have used CRISPR/Cas with or without DNA repair template in both corn and soybean for a range of applications including enhancing drought tolerance, improving seed oil composition, and endowing herbicide tolerance. Importantly, by pairing CRISPR/Cas technology with recent advances in plant tissue culture, these changes can be introduced directly into commercially relevant genotypes. This powerful combination of technologies enables advanced breeding techniques for introducing natural genetic variations directly into product relevant lines with improved speed and quality compared with traditional breeding methods. Variation generated through such CRISPR/Cas enabled advanced breeding approaches can be indistinguishable from naturally occurring variation and therefore should be readily accessible for commercialization. The precision, reach, and flexibility afforded by CRISPR/Cas promise an important role for genome editing in future crop improvement efforts.

Determination of Substrate Preferences for Desaturases and Elongases for Production of Docosahexaenoic Acid from Oleic Acid in Engineered Canola

Production of eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) in plant seed oils has been pursued to improve availability of these omega-3 fatty acids that provide important human health benefits. Canola (Brassica napus), through the introduction of 10 enzymes, can convert oleic acid (OLA) into EPA and ultimately DHA through a pathway consisting of two elongation and five desaturation steps. Herein we present an assessment of the substrate specificity of the seven desaturases and three elongases that were introduced into canola by expressing individual proteins in yeast. In vivo feeding experiments were conducted with 14 potential fatty acid intermediates in an OLA to DHA pathway to determine the fatty acid substrate profiles for each enzyme. Membrane fractions were prepared from yeast expression strains and shown to contain active enzymes. The elongases, as expected, extended acyl-CoA substrates in the presence of malonyl-CoA. To distinguish between enzymes that desaturate CoA- and phosphatidylcholine-linked fatty acid substrates, we developed a novel in vitro method. We show that a delta-12 desaturase from Phytophthora sojae, an omega-3 desaturase from Phytophthora infestans and a delta-4 desaturase from Thraustochytrium sp., all prefer phosphatidylcholine-linked acyl substrates with comparatively low use of acyl-CoA substrates. To further validate our method, a delta-9 desaturase from Saccharomyces cerevisiae was confirmed to use acyl-CoA as substrate, but could not use phosphatidylcholine-linked substrates. The results and the assay methods presented herein will be useful in efforts to improve modeling of fatty acid metabolism and production of EPA and DHA in plants.

Progress of targeted genome modification approaches in higher plants

Transgene integration in plants is based on illegitimate recombination between non-homologous sequences. The low control of integration site and number of (trans/cis)gene copies might have negative consequences on the expression of transferred genes and their insertion within endogenous coding sequences. The first experiments conducted to use precise homologous recombination for gene integration commenced soon after the first demonstration that transgenic plants could be produced. Modern transgene targeting categories used in plant biology are: (a) homologous recombination-dependent gene targeting; (b) recombinase-mediated site-specific gene integration; (c) oligonucleotide-directed mutagenesis; (d) nuclease-mediated site-specific genome modifications. New tools enable precise gene replacement or stacking with exogenous sequences and targeted mutagenesis of endogeneous sequences. The possibility to engineer chimeric designer nucleases, which are able to target virtually any genomic site, and use them for inducing double-strand breaks in host DNA create new opportunities for both applied plant breeding and functional genomics. CRISPR is the most recent technology available for precise genome editing. Its rapid adoption in biological research is based on its inherent simplicity and efficacy. Its utilization, however, depends on available sequence information, especially for genome-wide analysis. We will review the approaches used for genome modification, specifically those for affecting gene integration and modification in higher plants. For each approach, the advantages and limitations will be noted. We also will speculate on how their actual commercial development and implementation in plant breeding will be affected by governmental regulations.

An Improved Variant of Soybean Type 1 Diacylglycerol Acyltransferase Increases the Oil Content and Decreases the Soluble Carbohydrate Content of Soybeans

Kinetically improved diacylglycerol acyltransferase (DGAT) variants were created to favorably alter carbon partitioning in soybean (Glycine max) seeds. Initially, variants of a type 1 DGAT from a high-oil, high-oleic acid plant seed, Corylus americana, were screened for high oil content in Saccharomyces cerevisiae Nearly all DGAT variants examined from high-oil strains had increased affinity for oleoyl-CoA, with S0.5 values decreased as much as 4.7-fold compared with the wild-type value of 0.94 µm Improved soybean DGAT variants were then designed to include amino acid substitutions observed in promising C. americana DGAT variants. The expression of soybean and C. americana DGAT variants in soybean somatic embryos resulted in oil contents as high as 10% and 12%, respectively, compared with only 5% and 7.6% oil achieved by overexpressing the corresponding wild-type DGATs. The affinity for oleoyl-CoA correlated strongly with oil content. The soybean DGAT variant that gave the greatest oil increase contained 14 amino acid substitutions out of a total of 504 (97% sequence identity with native). Seed-preferred expression of this soybean DGAT1 variant increased oil content of soybean seeds by an average of 3% (16% relative increase) in highly replicated, single-location field trials. The DGAT transgenes significantly reduced the soluble carbohydrate content of mature seeds and increased the seed protein content of some events. This study demonstrated that engineering of the native DGAT enzyme is an effective strategy to improve the oil content and value of soybeans.

Gene stacking by recombinases

Efficient methods of stacking genes into plant genomes are needed to expedite transfer of multigenic traits to crop varieties of diverse ecosystems. Over two decades of research has identified several DNA recombinases that carryout efficient cis and trans recombination between the recombination sites artificially introduced into the plant chromosome. The specificity and efficiency of recombinases make them extremely attractive for genome engineering. In plant biotechnology, recombinases have mostly been used for removing selectable marker genes and have rarely been extended to more complex applications. The reversibility of recombination, a property of the tyrosine family of recombinases, does not lend itself to gene stacking approaches that involve rounds of transformation for integrating genes into the engineered sites. However, recent developments in the field of recombinases have overcome these challenges and paved the way for gene stacking. Some of the key advancements include the application of unidirectional recombination systems, modification of recombination sites and transgene site modifications to allow repeated site-specific integrations into the selected site. Gene stacking is relevant to agriculturally important crops, many of which are difficult to transform; therefore, development of high-efficiency gene stacking systems will be important for its application on agronomically important crops, and their elite varieties. Recombinases, by virtue of their specificity and efficiency in plant cells, emerge as powerful tools for a variety of applications including gene stacking.

Method for Biolistic Site-Specific Integration in Plants Catalyzed by Bxb1 Integrase

Crop improvement is a never ending process. With a transgenesis approach, it is not inconceivable to envision a continuous addition of new transgenes to existing cultivars. Previously, we described a recombinase-directed gene stacking method in tobacco (Hou et al., Mol Plant 7:1756-1765, 2014). Being able to stack DNA to a previous location ensures that the number of genetic loci does not increase with each new round of transgene addition. Whereas the previous demonstration was conducted through polyethylene glycol to mediate uptake of DNA into tobacco protoplasts, we now describe protocols for using biolistic transformation to stack DNA in tobacco and rice.

Gene stacking in plant cell using recombinases for gene integration and nucleases for marker gene deletion

BACKGROUND

Practical approaches for multigene transformation and gene stacking are extremely important for engineering complex traits and adding new traits in transgenic crops. Trait deployment by gene stacking would greatly simplify downstream plant breeding and trait introgression into cultivars. Gene stacking into pre-determined genomic sites depends on mechanisms of targeted DNA integration and recycling of selectable marker genes. Targeted integrations into chromosomal breaks, created by nucleases, require large transformation efforts. Recombinases such as Cre-lox, on the other hand, efficiently drive site-specific integrations in plants. However, the reversibility of Cre-lox recombination, due to the incorporation of two cis-positioned lox sites, presents a major bottleneck in its application in gene stacking. Here, we describe a strategy of resolving this bottleneck through excision of one of the cis-positioned lox, embedded in the marker gene, by nuclease activity.

METHODS

All transgenic lines were developed by particle bombardment of rice callus with plasmid constructs. Standard molecular approach was used for building the constructs. Transgene loci were analyzed by PCR, Southern hybridization, and DNA sequencing.

RESULTS

We developed a highly efficient gene stacking method by utilizing powerful recombinases such as Cre-lox and FLP-FRT, for site-specific gene integrations, and nucleases for marker gene excisions. We generated Cre-mediated site-specific integration locus in rice and showed excision of marker gene by I-SceI at ~20 % efficiency, seamlessly connecting genes in the locus. Next, we showed ZFN could be used for marker excision, and the locus can be targeted again by recombinases. Hence, we extended the power of recombinases to gene stacking application in plants. Finally, we show that heat-inducible I-SceI is also suitable for marker excision, and therefore could serve as an important tool in streamlining this gene stacking platform.

CONCLUSIONS

A practical approach for gene stacking in plant cell was developed that allows targeted gene insertions through rounds of transformation, a method needed for introducing new traits into transgenic lines for their rapid deployment in the field. By using Cre-lox, a powerful site-specific recombination system, this method greatly improves gene stacking efficiency, and through the application of nucleases develops marker-free, seamless stack of genes at pre-determined chromosomal sites.

Cas9-Guide RNA Directed Genome Editing in Soybean

Recently discovered bacteria and archaea adaptive immune system consisting of clustered regularly interspaced short palindromic repeats (CRISPR) and CRISPR-associated (Cas) endonuclease has been explored in targeted genome editing in different species. Streptococcus pyogenes Cas9-guide RNA (gRNA) was successfully applied to generate targeted mutagenesis, gene integration, and gene editing in soybean (Glycine max). Two genomic sites, DD20 and DD43 on chromosome 4, were mutagenized with frequencies of 59% and 76%, respectively. Sequencing randomly selected transgenic events confirmed that the genome modifications were specific to the Cas9-gRNA cleavage sites and consisted of small deletions or insertions. Targeted gene integrations through homology-directed recombination were detected by border-specific polymerase chain reaction analysis for both sites at callus stage, and one DD43 homology-directed recombination event was transmitted to T1 generation. T1 progenies of the integration event segregated according to Mendelian laws and clean homozygous T1 plants with the donor gene precisely inserted at the DD43 target site were obtained. The Cas9-gRNA system was also successfully applied to make a directed P178S mutation of acetolactate synthase1 gene through in planta gene editing.

Enrichments of gene replacement events by Agrobacterium-mediated recombinase-mediated cassette exchange

We report recombinase-mediated cassette exchange (RMCE), which can permit integration of transgenes into pre-defined chromosomal loci with no co-expressed marker gene by using Agrobacterium-mediated transformation. Transgenic tobacco plants which have a single copy of negative marker genes (codA) at target loci in heterozygous and homozygous conditions were used for gene exchange by the RMCE method. By negative selection, we were able to obtain five heterozygous and four homozygous transgenic plants in which the genes were exchanged from 64 leaf segments of heterozygous and homozygous target plants, respectively. Except for one transgenic plant with an extra copy, the other eight plants had only a single copy of marker-free transgenes, and no footprint of random integrated copies was detected in half of the eight plants. The RMCE re-transformation frequencies were calculated as 6.25 % per explant and were approximately the same as the average percentage of intact single-copy transformation events for standard tobacco Agrobacterium-mediated transformation.

Maize transformation technology development for commercial event generation

Maize is an important food and feed crop in many countries. It is also one of the most important target crops for the application of biotechnology. Currently, there are more biotech traits available on the market in maize than in any other crop. Generation of transgenic events is a crucial step in the development of biotech traits. For commercial applications, a high throughput transformation system producing a large number of high quality events in an elite genetic background is highly desirable. There has been tremendous progress in Agrobacterium-mediated maize transformation since the publication of the Ishida et al. (1996) paper and the technology has been widely adopted for transgenic event production by many labs around the world. We will review general efforts in establishing efficient maize transformation technologies useful for transgenic event production in trait research and development. The review will also discuss transformation systems used for generating commercial maize trait events currently on the market. As the number of traits is increasing steadily and two or more modes of action are used to control key pests, new tools are needed to efficiently transform vectors containing multiple trait genes. We will review general guidelines for assembling binary vectors for commercial transformation. Approaches to increase transformation efficiency and gene expression of large gene stack vectors will be discussed. Finally, recent studies of targeted genome modification and transgene insertion using different site-directed nuclease technologies will be reviewed.

Trait stacking via targeted genome editing

Modern agriculture demands crops carrying multiple traits. The current paradigm of randomly integrating and sorting independently segregating transgenes creates severe downstream breeding challenges. A versatile, generally applicable solution is hereby provided: the combination of high-efficiency targeted genome editing driven by engineered zinc finger nucleases (ZFNs) with modular 'trait landing pads' (TLPs) that allow 'mix-and-match', on-demand transgene integration and trait stacking in crop plants. We illustrate the utility of nuclease-driven TLP technology by applying it to the stacking of herbicide resistance traits. We first integrated into the maize genome an herbicide resistance gene, pat, flanked with a TLP (ZFN target sites and sequences homologous to incoming DNA) using WHISKERS™-mediated transformation of embryogenic suspension cultures. We established a method for targeted transgene integration based on microparticle bombardment of immature embryos and used it to deliver a second trait precisely into the TLP via cotransformation with a donor DNA containing a second herbicide resistance gene, aad1, flanked by sequences homologous to the integrated TLP along with a corresponding ZFN expression construct. Remarkably, up to 5% of the embryo-derived transgenic events integrated the aad1 transgene precisely at the TLP, that is, directly adjacent to the pat transgene. Importantly and consistent with the juxtaposition achieved via nuclease-driven TLP technology, both herbicide resistance traits cosegregated in subsequent generations, thereby demonstrating linkage of the two independently transformed transgenes. Because ZFN-mediated targeted transgene integration is becoming applicable across an increasing number of crop species, this work exemplifies a simple, facile and rapid approach to trait stacking.

Influence of carbon to nitrogen ratios on soybean somatic embryo (cv. Jack) growth and composition

Soybean [Glycine max (L.) Merr.] seed are valued for their protein and oil content. Soybean somatic embryos cultured in Soybean Histodifferentiation and Maturation (SHaM) medium were examined for their suitability as a model system for developing an understanding of assimilate partitioning and metabolic control points for protein and oil biosynthesis in soybean seed. This report describes the growth dynamics and compositional changes of SHaM embryos in response to change in the carbon to nitrogen ratio of the medium. It was postulated that at media compositions that were sufficient to support maximal growth rates, changes in the C:N ratio are likely to influence the partitioning of resources between the various storage products, especially protein and oil. As postulated, at steady-state growth rates, embryo protein content was strongly correlated with decreasing C:N ratios and increasing glutamine consumption rates. However, oil content remained relatively unchanged across the C:N ratio range tested, and resources were instead directed towards the starch and residual biomass (estimated by mass balance) pools in response to increasing C:N ratios. Protein and oil were inversely related only at concentrations of sucrose in the medium <88 mM, where carbon limited growth and no starch was found to accumulate in the tissues. These observations and the high reproducibility in the data indicate that SHaM embryos are an ideal model system for the application of metabolic flux analysis studies designed to test hypotheses regarding assimilate partitioning in developing soybean seeds.

Advances and remaining challenges in the transformation of barley and wheat

Highly efficient and cost-effective transformation technologies are essential for studying gene function in the major cereal crops, wheat and barley. Demand for efficient transformation systems to allow over-expression, or RNAi-mediated silencing of target genes, is greatly increasing. This is due to technology advances, such as rapid genome sequencing, enhancing the rate of gene discovery and thus leading to a large number of genes requiring functional analysis through transformation pipelines. Barley can be transformed at very high efficiency but the methods are genotype-dependent. Wheat is more difficult to transform, however, recent advances are also allowing the development of high-throughput transformation systems in wheat. For many gene function studies, barley can be used as a model for wheat due to its highly efficient transformation rates and smaller, less complex genome. An ideal transformation system needs to be extremely efficient, simple to perform, inexpensive, genotype-independent, and give the required expression of the transgene. Considerable progress has been made in enhancing transformation efficiencies, controlling transgene expression and in understanding and manipulating transgene insertion. However, a number of challenges still remain, one of the key ones being the development of genotype-independent transformation systems for wheat and barley.

Recent advances in soybean transformation and their application to molecular breeding and genomic analysis

Herbicide-resistant transgenic soybean plants hold a leading market share in the USA and other countries, but soybean has been regarded as recalcitrant to transformation for many years. The cumulative and, at times, exponential advances in genetic manipulation have made possible further choices for soybean transformation. The most widely and routinely used transformation systems are cotyledonary node-Agrobacterium-mediated transformation and somatic embryo-particle-bombardment-mediated transformation. These ready systems enable us to improve seed qualities and agronomic characteristics by transgenic approaches. In addition, with the accumulation of soybean genomic resources, convenient or promising approaches will be requisite for the determination and use of gene function in soybean. In this article, we describe recent advances in and problems of soybean transformation, and survey the current transgenic approaches for applied and basic research in Japan.

Strategies for transgenic nematode control in developed and developing world crops

Nematodes cause an estimated $118b annual losses to world crops and they are not readily controlled by pesticides or other control options. For many crops natural resistance genes are unavailable to plant breeders or progress by this approach is slow. Transgenic plants can provide nematode resistance for such crops. Two approaches have been field trialled that control a wide range of nematodes by either limiting use of their dietary protein uptake from the crop or by preventing root invasion without a direct lethality. In addition, RNA interference increasingly in tandem with genomic studies is providing a range of potential resistance traits that involve no novel protein production. Transgenic resistance can be delivered by tissue specific promoters to just root tissues where most economic nematodes invade and feed rather than the harvested yield. High efficacy and durability can be provided by stacking nematode resistance traits including any that natural resistance provides. The constraints to uptake centre on market acceptance and not the availability of appropriate biotechnology. The need to deploy nematode resistance is intensifying with loss of pesticides, an increased need to protect crop profit margins and in many developing world countries where nematodes severely damage both commodity and staple crops.

Recombinase-mediated gene stacking as a transformation operating system

The current method for combining transgenes into a genome is through the assortment of independent loci, a classical operating system compatible with transgenic traits created by different developers, at different times and/or through different transformation techniques. However, as the number of transgenic loci increases over time, increasingly larger populations are needed to find the rare individual with the desired assortment of transgenic loci along with the non-transgenic elite traits. Introducing a transgene directly into a field cultivar would bypass the need to introgress the engineered trait. However, this necessitates separate transformations into numerous field cultivars, along with the characterization and regulatory approval of each independent transformation event. Reducing the number of segregating transgenic loci could be achieved if multiple traits are introduced at the same time, a preferred option if each of the many traits is new or requires re-engineering. If re-engineering of previously introduced traits is not needed, then appending a new trait to an existing locus would be a rational strategy. The insertion of new DNA at a known locus can be accomplished by site-specific integration, through a host-dependent homology-based process, or a heterologous site-specific recombination system. Here, we discuss gene stacking through the use of site-specific recombinases.

Engineering plastid fatty acid biosynthesis to improve food quality and biofuel production in higher plants

The ability to manipulate plant fatty acid biosynthesis by using new biotechnological approaches has allowed the production of transgenic plants with unusual fatty acid profile and increased oil content. This review focuses on the production of very long chain polyunsaturated fatty acids (VLCPUFAs) and the increase in oil content in plants using molecular biology tools. Evidences suggest that regular consumption of food rich in VLCPUFAs has multiple positive health benefits. Alternative sources of these nutritional fatty acids are found in cold-water fishes. However, fish stocks are in severe decline because of decades of overfishing, and also fish oils can be contaminated by the accumulation of toxic compounds. Recently, there is also an increase in oilseed use for the production of biofuels. This tendency is partly associated with the rapidly rising costs of petroleum, increased concern about the environmental impact of fossil oil and the attractive need to develop renewable sources of fuel. In contrast to this scenario, oil derived from crop plants is normally contaminant free and less environmentally aggressive. Genetic engineering of the plastid genome (plastome) offers a number of attractive advantages, including high-level foreign protein expression, marker-gene excision and transgene containment because of maternal inheritance of plastid genome in most crops. Here, we describe the possibility to improve fatty acid biosynthesis in plastids, production of new fatty acids and increase their content in plants by genetic engineering of plastid fatty acid biosynthesis via plastid transformation.

Recombinase technology: applications and possibilities

The use of recombinases for genomic engineering is no longer a new technology. In fact, this technology has entered its third decade since the initial discovery that recombinases function in heterologous systems (Sauer in Mol Cell Biol 7(6):2087-2096, 1987). The random insertion of a transgene into a plant genome by traditional methods generates unpredictable expression patterns. This feature of transgenesis makes screening for functional lines with predictable expression labor intensive and time consuming. Furthermore, an antibiotic resistance gene is often left in the final product and the potential escape of such resistance markers into the environment and their potential consumption raises consumer concern. The use of site-specific recombination technology in plant genome manipulation has been demonstrated to effectively resolve complex transgene insertions to single copy, remove unwanted DNA, and precisely insert DNA into known genomic target sites. Recombinases have also been demonstrated capable of site-specific recombination within non-nuclear targets, such as the plastid genome of tobacco. Here, we review multiple uses of site-specific recombination and their application toward plant genomic engineering. We also provide alternative strategies for the combined use of multiple site-specific recombinase systems for genome engineering to precisely insert transgenes into a pre-determined locus, and removal of unwanted selectable marker genes.

New frontiers in oilseed biotechnology: meeting the global demand for vegetable oils for food, feed, biofuel, and industrial applications

Vegetable oils have historically been a valued commodity for food use and to a lesser extent for non-edible applications such as detergents and lubricants. The increasing reliance on biodiesel as a transportation fuel has contributed to rising demand and higher prices for vegetable oils. Biotechnology offers a number of solutions to meet the growing need for affordable vegetable oils and vegetable oils with improved fatty acid compositions for food and industrial uses. New insights into oilseed metabolism and its transcriptional control are enabling biotechnological enhancement of oil content and quality. Alternative crop platforms and emerging technologies for metabolic engineering also hold promise for meeting global demand for vegetable oils and for enhancing nutritional, industrial, and biofuel properties of vegetable oils.

Chromosome engineering: power tools for plant genetics

The term "chromosome engineering" describes technologies in which chromosomes are manipulated to change their mode of genetic inheritance. This review examines recent innovations in chromosome engineering that promise to greatly increase the efficiency of plant breeding. Haploid Arabidopsis thaliana have been produced by altering the kinetochore protein CENH3, yielding instant homozygous lines. Haploid production will facilitate reverse breeding, a method that downregulates recombination to ensure progeny contain intact parental chromosomes. Another chromosome engineering success is the conversion of meiosis into mitosis, which produces diploid gametes that are clones of the parent plant. This is a key step in apomixis (asexual reproduction through seeds) and could help to preserve hybrid vigor in the future. New homologous recombination methods in plants will potentiate many chromosome engineering applications.