Polymorph evolution during crystal growth studied by 3D electron diffraction

TAAM refinement on high-resolution experimental and simulated 3D ED/MicroED data for organic molecules

3D electron diffraction (3D ED), or microcrystal electron diffraction (MicroED), has become an alternative technique for determining the high-resolution crystal structures of compounds from sub-micron-sized crystals. Here, we considered L-alanine, α-glycine and urea, which are known to form good-quality crystals, and collected high-resolution 3D ED data on our in-house TEM instrument. In this study, we present a comparison of independent atom model (IAM) and transferable aspherical atom model (TAAM) kinematical refinement against experimental and simulated data. TAAM refinement on both experimental and simulated data clearly improves the model fitting statistics (R factors and residual electrostatic potential) compared to IAM refinement. This shows that TAAM better represents the experimental electrostatic potential of organic crystals than IAM. Furthermore, we compared the geometrical parameters and atomic displacement parameters (ADPs) resulting from the experimental refinements with the simulated refinements, with the periodic density functional theory (DFT) calculations and with published X-ray and neutron crystal structures. The TAAM refinements on the 3D ED data did not improve the accuracy of the bond lengths between the non-H atoms. The experimental 3D ED data provided more accurate H-atom positions than the IAM refinements on the X-ray diffraction data. The IAM refinements against 3D ED data had a tendency to lead to slightly longer X-H bond lengths than TAAM, but the difference was statistically insignificant. Atomic displacement parameters were too large by tens of percent for L-alanine and α-glycine. Most probably, other unmodelled effects were causing this behaviour, such as radiation damage or dynamical scattering.

Polymorphic Structure Determination of the Macrocyclic Drug Paritaprevir by MicroED

Paritaprevir is an orally bioavailable, macrocyclic drug used for treating chronic Hepatitis C virus (HCV) infection. Its structures have been elusive to the public until recently when one of the crystal forms is solved by microcrystal electron diffraction (MicroED). In this work, the MicroED structures of two distinct polymorphic crystal forms of paritaprevir are reported from the same experiment. The different polymorphs show conformational changes in the macrocyclic core, as well as the cyclopropyl sulfonamide and methyl pyrazinamide substituents. Molecular docking shows that one of the conformations fits well into the active site pocket of the HCV non-structural 3/4A (NS3/4A) serine protease target, and can interact with the pocket and catalytic triad via hydrophobic interactions and hydrogen bonds. These results can provide further insight for optimization of the binding of acyl sulfonamide inhibitors to the HCV NS3/4A serine protease. In addition, this also demonstrates the opportunity to derive different polymorphs and distinct macrocycle conformations from the same experiments using MicroED.

Phase Identification and Discovery of an Elusive Polymorph of Drug-Polymer Inclusion Complex Using Automated 3D Electron Diffraction

3D electron diffraction (3D ED) has shown great potential in crystal structure determination in materials, small organic molecules, and macromolecules. In this work, an automated, low-dose and low-bias 3D ED protocol has been implemented to identify six phases from a multiple-phase melt-crystallisation product of an active pharmaceutical ingredient, griseofulvin (GSF). Batch data collection under low-dose conditions using a widely available commercial software was combined with automated data analysis to collect and process over 230 datasets in three days. Accurate unit cell parameters obtained from 3D ED data allowed direct phase identification of GSF Forms III, I and the known GSF inclusion complex (IC) with polyethylene glycol (PEG) (GSF-PEG IC-I), as well as three minor phases, namely GSF Forms II, V and an elusive new phase, GSF-PEG IC-II. Their structures were then directly determined by 3D ED. Furthermore, we reveal how the stabilities of the two GSF-PEG IC polymorphs are closely related to their crystal structures. These results demonstrate the power of automated 3D ED for accurate phase identification and direct structure determination of complex, beam-sensitive crystallisation products, which is significant for drug development where solid form screening is crucial for the overall efficacy of the drug product.

ROY Crystallization on Poly(ethylene) Fibers, a Model for Bed Net Crystallography

Many long-lasting insecticidal bed nets for protection against disease vectors consist of poly(ethylene) fibers in which insecticide is incorporated during manufacture. Insecticide molecules diffuse from within the supersaturated polymers to surfaces where they become bioavailable to insects and often crystallize, a process known as blooming. Recent studies revealed that contact insecticides can be highly polymorphic. Moreover, insecticidal activity is polymorph-dependent, with forms having a higher crystal free energy yielding faster insect knockdown and mortality. Consequently, the crystallographic characterization of insecticide crystals that form on fibers is critical to understanding net function and improving net performance. Structural characterization of insecticide crystals on bed net fiber surfaces, let alone their polymorphs, has been elusive owing to the minute size of the crystals, however. Using the highly polymorphous compound ROY (5-methyl-2-[(2-nitrophenyl)-amino]thiophene-3-carbonitrile) as a proxy for insecticide crystallization, we investigated blooming and crystal formation on the surface of extruded poly(ethylene) fibers containing ROY. The blooming rates, tracked from the time of extrusion, were determined by UV-vis spectroscopy after successive washes. Six crystalline polymorphs (of the 13 known) were observed on poly(ethylene) fiber surfaces, and they were identified and characterized by Raman microscopy, scanning electron microscopy, and 3D electron diffraction. These observations reveal that the crystallization and phase behavior of polymorphs forming on poly(ethylene) fibers is complex and dynamic. The characterization of blooming and microcrystals underscores the importance of bed net crystallography for the optimization of bed net performance.

Polymorphic Structure Determination of the Macrocyclic Drug Paritaprevir by MicroED

Paritaprevir is an orally bioavailable, macrocyclic drug used for treating chronic Hepatitis C virus infection. Its structures had been elusive to the public until recently when one of the crystal forms was solved by MicroED. In this work, we report the MicroED structures of two distinct polymorphic crystal forms of paritaprevir from the same experiment. The different polymorphs show conformational changes in the macrocyclic core, as well as the cyclopropylsulfonamide and methylpyrazinamide substituents. Molecular docking shows that one of the conformations fits well into the active site pocket of the NS3/4A serine protease target, and can interact with the pocket and catalytic triad via hydrophobic interactions and hydrogen bonds. These results can provide further insight for optimization of the binding of acylsulfonamide inhibitors to the NS3/4A serine protease. In addition, this also demonstrate the opportunity of deriving different polymorphs and distinct macrocycle conformations from the same experiments using MicroED.

Accurate structure models and absolute configuration determination using dynamical effects in continuous-rotation 3D electron diffraction data

Continuous-rotation 3D electron diffraction methods are increasingly popular for the structure analysis of very small organic molecular crystals and crystalline inorganic materials. Dynamical diffraction effects cause non-linear deviations from kinematical intensities that present issues in structure analysis. Here, a method for structure analysis of continuous-rotation 3D electron diffraction data is presented that takes multiple scattering effects into account. Dynamical and kinematical refinements of 12 compounds-ranging from small organic compounds to metal-organic frameworks to inorganic materials-are compared, for which the new approach yields significantly improved models in terms of accuracy and reliability with up to fourfold reduction of the noise level in difference Fourier maps. The intrinsic sensitivity of dynamical diffraction to the absolute structure is also used to assign the handedness of 58 crystals of 9 different chiral compounds, showing that 3D electron diffraction is a reliable tool for the routine determination of absolute structures.

Direct structure determination of vemurafenib polymorphism from compact spherulites using 3D electron diffraction

The spherulitic morphology is considered to be the most common morphology of crystalline materials and is particularly apparent in melt-crystallized products. Yet, historically, the polycrystalline nature of spherulites has hindered successful crystal structure determination. Here, we report the direct structure determination of a clinical drug, vemurafenib (VMN), in compact spherulite form using 3D electron diffraction (3D ED). VMN has four known polymorphs. We first solved the crystal structures of α-, β-, and γ-VMN from compact spherulites using 3D ED, and the resulting structures were highly consistent with those obtained by single-crystal X-ray diffraction. We then determined the crystal structure of δ-VMN-the least stable polymorph which cannot be cultivated as a single crystal-directly from the compact spherulite sample. We unexpectedly discovered a new polymorph during our studies, denoted as ε-VMN. Single crystals of ε-VMN are extremely thin and not suitable for study by X-ray diffraction. Again, we determined the structure of ε-VMN in a compact spherulite form. This successful structure elucidation of all five VMN polymorphs demonstrates the possibility of directly determining structures from melt-grown compact spherulite samples. Thereby, this discovery will improve the efficiency and broaden the scope of polymorphism research, especially within the field of melt crystallization.

Electron Diffraction of 3D Molecular Crystals

Electron crystallography has a storied history which rivals that of its more established X-ray-enabled counterpart. Recent advances in data collection and analysis have sparked a renaissance in the field, opening a new chapter for this venerable technique. Burgeoning interest in electron crystallography has spawned innovative methods described by various interchangeable labels (3D ED, MicroED, cRED, etc.). This Review covers concepts and findings relevant to the practicing crystallographer, with an emphasis on experiments aimed at using electron diffraction to elucidate the atomic structure of three-dimensional molecular crystals.

Single-crystal structure determination of nanosized metal-organic frameworks by three-dimensional electron diffraction

Metal-organic frameworks (MOFs) have attracted considerable interest due to their well-defined pore architecture and structural tunability on molecular dimensions. While single-crystal X-ray diffraction (SCXRD) has been widely used to elucidate the structures of MOFs at the atomic scale, the formation of large and well-ordered crystals is still a crucial bottleneck for structure determination. To alleviate this challenge, three-dimensional electron diffraction (3D ED) has been developed for structure determination of nano- (submicron-)sized crystals. Such 3D ED data are collected from each single crystal using transmission electron microscopy. In this protocol, we introduce the entire workflow for structural analysis of MOFs by 3D ED, from sample preparation, data acquisition and data processing to structure determination. We describe methods for crystal screening and handling of crystal agglomerates, which are crucial steps in sample preparation for single-crystal 3D ED data collection. We further present how to set up a transmission electron microscope for 3D ED data acquisition and, more importantly, offer suggestions for the optimization of data acquisition conditions. For data processing, including unit cell and space group determination, and intensity integration, we provide guidelines on how to use electron and X-ray crystallography software to process 3D ED data. Finally, we present structure determination from 3D ED data and discuss the important features associated with 3D ED data that need to be considered. We believe that this protocol provides critical details for implementing and utilizing 3D ED as a structure determination platform for nano- (submicron-)sized MOFs as well as other crystalline materials.

In situ optical spectroscopy of crystallization: One crystal nucleation at a time

While crystallization is a ubiquitous and an important process, the microscopic picture of crystal nucleation is yet to be established. Recent studies suggest that the nucleation process can be more complex than the view offered by the classical nucleation theory. Here, we implement single crystal nucleation spectroscopy (SCNS) by combining Raman microspectroscopy and optical trapping induced crystallization to spectroscopically investigate one crystal nucleation at a time. Raman spectral evolution during a single glycine crystal nucleation from water, measured by SCNS and analyzed by a nonsupervised spectral decomposition technique, uncovered the Raman spectrum of prenucleation aggregates and their critical role as an intermediate species in the dynamics. The agreement between the spectral feature of prenucleation aggregates and our simulation suggests that their structural order emerges through the dynamic formation of linear hydrogen-bonded networks. The present work provides a strong impetus for accelerating the investigation of crystal nucleation by optical spectroscopy.

MicroED: conception, practice and future opportunities

This article documents a keynote seminar presented at the IUCr Congress in Prague, 2021. The cryo-EM method microcrystal electron diffraction is described and put in the context of macromolecular electron crystallography from its origins in 2D crystals of membrane proteins to today's application to 3D crystals a millionth the size of that needed for X-ray crystallography. Milestones in method development and applications are described with an outlook to the future.

Three-Dimensional Electron Diffraction: A Powerful Structural Characterization Technique for Crystal Engineering

Understanding crystal structures and behaviors is crucial for constructing and engineering crystalline materials with various properties and functions. Recent advancement in three-dimensional electron diffraction (3D ED) and its application on...

Microcrystal electron diffraction in macromolecular and pharmaceutical structure determination

Microcrystal electron diffraction (MicroED) has recently shown to be a promising technique for structure determination in structural biology and pharmaceutical chemistry. Here, we discuss the unique properties of electrons and motivate its use for diffraction experiments. We review the latest developments in MicroED, and illustrate its applications in macromolecular crystallography, fragment screening and structure guided drug discovery. We discuss the perspectives of MicroED in synthetic chemistry and pharmaceutical development. We anticipate that the rapid advances MicroED showcased here will promote further development of electron crystallography and open up new opportunities for drug discovery.

Electron diffraction: Accelerating drug development

Electron Diffraction (ED) is gaining momentum in science and industry. The application of ED for performing nanocrystallography is a disruptive innovation that is opening up fascinating new perspectives particularly for organic compounds required in the fields of chemical, pharmaceutical and advanced materials research.

Revealing the early stages of carbamazepine crystallization by cryoTEM and 3D electron diffraction

Time-resolved carbamazepine crystallization from wet ethanol has been monitored using a combination of cryoTEM and 3D electron diffraction. Carbamazepine is shown to crystallize exclusively as a dihydrate after 180 s. When the timescale was reduced to 30 s, three further polymorphs could be identified. At 20 s, the development of early stage carbamazepine dihydrate was observed through phase separation. This work reveals two possible crystallization pathways present in this active pharmaceutical ingredient.

MicroED for the study of protein–ligand interactions and the potential for drug discovery

Microcrystal electron diffraction (MicroED) is an electron cryo-microscopy (cryo-EM) technique used to determine molecular structures with crystals that are a millionth the size needed for traditional single-crystal X-ray crystallography. An exciting use of MicroED is in drug discovery and development, where it can be applied to the study of proteins and small molecule interactions, and for structure determination of natural products. The structures are then used for rational drug design and optimization. In this Perspective, we discuss the current applications of MicroED for structure determination of protein-ligand complexes and potential future applications in drug discovery.

3D Electron Diffraction for Chemical Analysis: Instrumentation Developments and Innovative Applications

In the past few years, many exciting papers reported results based on crystal structure determination by electron diffraction. The aim of this review is to provide general and practical information to structural chemists interested in stepping into this emerging field. We discuss technical characteristics of electron microscopes for research units that would like to acquire their own instrumentation, as well as those practical aspects that appear different between X-ray and electron crystallography. We also include a discussion about applications where electron crystallography provides information that is different, and possibly complementary, with respect to what is available from X-ray crystallography.

Establishing electron diffraction in chemical crystallography

The emerging field of 3D electron diffraction (3D ED) opens new opportunities for structure determination from sub-micrometre-sized crystals. Although the foundations of this technology emerged earlier, the past decade has seen developments in cryo-electron microscopy and (X-ray) crystallography that particularly enable the widespread use of 3D ED. This Perspective describes to chemists and chemical crystallographers just how similar electron and X-ray diffraction are and discusses their complementary aspects. We wish to establish 3D ED in the broader chemistry community, such that electron crystallography becomes a common part of the analytical chemistry toolkit. With a suitable instrument at their disposal, every skilled crystallographer can quickly learn to perform structure determinations using 3D ED.

Refinements on electron diffraction data of β-glycine in MoPro: a quest for an improved structure model

The advancement in 3D electron diffraction (3D ED) techniques that lead to a revolution in molecular structure determination using nano-sized crystals is now achieving atomic resolution. The structures can be obtained from 3D ED data with tools similar to those used for X-ray structure determination. In this context, the MoPro software, originally designed for structure and charge density refinements using X-ray diffraction data, has been adapted. Structure refinement on 3D ED data was achieved via implementation of electron scattering factors available in the literature and by application of the Mott–Bethe equation to X-ray scattering factors computed from the multipolar atom model. The multipolar model was parametrized using the transferable pseudoatom databanks ELMAM2 and UBDB. Applying the independent atom model (IAM), i.e. spherical neutral atom refinement, to 3D ED data on β-glycine in MoPro resulted in structure and refinement statistics comparable to those obtained from other well known software. Use of the transferred aspherical atom model (TAAM) led to improvement of the refinement statistics and a better fit of the model to the 3D ED data as compared with the spherical atom refinement. The anisotropic displacement parameters of non-H atoms appear underestimated by typically 0.003 Å2 for the non-H atoms in IAM refinement compared with TAAM. Thus, MoPro is shown to be an effective tool for crystal structure refinement on 3D ED data and allows use of a spherical or a multipolar atom model. Electron density databases can be readily transferred with no further modification needed when the Mott–Bethe equation is applied.

Crystal engineering in IUCrJ: from 'the' crystal structure to 'a' crystal structure

What is 'structure' in the context of a molecular solid?

Increasing complexity: structural equivalence and combinatorial approaches to preparation of high order cocrystals

An algorithmic strategy to design stoichiometric quaternary and solid-solution quinary solids is described. The strategy involves recognition of structural inequivalences to generate ternary and quaternary cocrystals which can then be extended to five-component solid solutions through matching of suitable interactions.

Crystal engineering in all its hues in

The articles in crystal engineering and structural chemistry in IUCrJ published from 2019 onwards reflect the breadth and outreach of this new and important subject.